Graphics/artifacting issues with new mid-2014 15" MacBookPro Retina

I'm having graphics issues with my new 15" mid-2014 2.8 MacBookPro Retina.  It came with Yosemite.  I keep get glitchy
artifacting when using Premiere Pro and After Effects (CC 2014), obviously, but then even just while using Finder when AE and PP are closed.
I've read about it with earlier models, but nothing about the new ones.
I turned off the Automatic Graphics Switching in Energy Saver and just updated my CUDA NVIDIA driver.  It's still a problem.  Any ideas on what to do next?
Thanks in advance.

Remove CUDA and see whether there's an improvement.
To remove CUDA, triple-click anywhere in the first line below on this page to select it:
/Library/Frameworks/CUDA.framework
/Library/LaunchAgents/com.nvidia.CUDASoftwareUpdate.plist
/Library/PreferencePanes/CUDA Preferences.prefPane
/System/Library/Extensions/CUDA.kext
/System/Library/StartupItems/CUDA
/usr/local/cuda
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Continue with the remaining lines. Some of the items may be absent, in which case you'll get a message that the file couldn't be found. After moving all the above items to the Trash, restart the computer and empty the Trash. Don't try to empty the Trash until you have restarted.
If you haven't already done so, back up all data before making any changes.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Similar Messages

  • What audio/midi interface works with new iMac 2014

    What audio/midi interface works with new iMac 2014. new imac only has USB3 and Thunderbolt.

    Thanks for the info.
    I have two MOTU 8pre's would these work with the Thunderbolt to Firewire adaptor?

  • Best way to transfer from mid 2012 macbook pro retina to new mid 2014 macbook pro

    I'm updating to a new 2014 macbook pro.  am i better off using a migration assistant from one to another, or restoring from Time Machine (with ethernet to thunderbolt adapter)?  Or some other method?
    thanks,
    ptkmac

    keg55 wrote:
    I have used the Setup Assistant during setup of OS X and I would use a current Time Machine back up to point to during Setup Assistant. I have also manually copied data and apps over from another Mac while on my network. Both take some time and both were equally successful.
    So, you have a choice after backing up your current Mac:
    Have both Macs on your network, run setup on your new Mac and afterwards manually copy files from the old to the new Mac.
    Run setup on your new Mac and use the Setup Assistant to migrate from a Time Machine back up all your user accounts, data and settings.
    Question on a similar line except I wanted to partition the drive that came on the new Mid 2014 MBPro (2.8 GHz, 1 TB SSD, 16 GB RAM).  Migrating from the old computer b/u seems pretty straight forward, but once the drive that come with the new MBPro is partitioned an install of OS X needs to be done.  Here's what I did, I installed the Mavericks I had purchased from the App Store when it came out.  Now, from reading here in the Communities, some have indicated the shipped Mavericks version is not the same as the App Store version.  Now that the shipped Mavericks is history (after the partitioning) should I try somehow to restore that from the Recovery HD/process?  Or ???
    This isn't my first rodeo, so I just went full speed ahead and did the partitioning and copied the former MBPro (early 2011) disk created by Carbon Copy Cloner over to the new boot partition.  It was suggested that an Erase and Install OS X could be done, but I don't see how that would bring the shipped Mavericks version for this new MBPro, unless the Recovery HD suite of utilities would go and grab that from Apple via Internet; which would be fairly lengthy since it would be via Internet connection.
    I'll back up a bit here for a second... I"m not experiencing any problems (kernel panics, etc.) but not sure if the system now is as it should be.  Hindsight being what it is I should have made a CCC copy of the shipped volume of Mavericks; if this is an issue. 
    The system seems to be running fine, and some of my "issues" (for lack of a better term) could be just the way the new Mid 2014 MBPro is handling things - like memory allocation (i.e. using close to the 16 GB most of the time) and kernel_task using 1 GB of memory - more at times).  Possibly if I wasn't a regular watcher of Activity Monitor I would just be plodding along, since the system seems to be working fine.  Occasionally some apps or their processes take a longer than I feel is what should be normal to do, hence looking at the Activity Monitor to see what is going on.
    Sorry for the long ramble.  Trying to see if I really have a problem that would necessitate a reinstall of Mavericks via Recovery HD; which could take up some valuable computer work time (which I'm also using posting here <grin>).
    Thanks in advance for any ideas, suggesting, etc.  Also, to the person who posted to my other question on this another thanks for those suggestions.  None of which I've done - yet.
    Take care all - and thank you again for  all the great minds who make these Community Boards work.
    Tom

  • When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)

    When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)
    I have attached the url of the unwanted site.

    Use this add-on [https://addons.mozilla.org/en-US/firefox/addon/custom-new-tab/ '''Custom new tab'''].

  • How can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

    how can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

    It's hopelessly outdated. It's simply not compatible.
    Mylenium

  • Whats the maximum resolution resolution supported @ 60 Hz on an external display for mid 2014 macbook pro retina 13 inch ?

    whats the maximum resolution supported @ 60 Hz on an external display for mid 2014 macbook pro retina 13 inch ?

    I don't know where you found 1920x1080, but that isn't the max. The INTERNAL display can even support more than that.
    The maximum resolution is really hardware based, and since Thunderbolt 2 has a Mini displayport connector (Mini Displayport 1.2), the max resolution for Mini Displayport is 4k (3840x2160).
    PLEASE NOTE: Not all adapters can support that resolution, most monitors that can run 4k @60Hz have Displayport 1.2 (The most recent revision), Mini Displayport 1.2, and HDMI 2.0. DVI dual link can run 4k, but only 24-30Hz, depending on the monitor.
    Hope this helps!!

  • Graphics card issue on new 2014 mini?

    I have two Viewsonic monitors hooked up to one of the new Mac Mini's. I have the 2.6 ghz version with a fusion drive. I'm using a Thunderbolt to DVI connection for both monitors (using the two thunderbolt/display ports).
    I'm having an issue where about 1 out of every 4 times I wake up the Mac from sleeping, one or both monitors have a distorted display. It almost looks like the colors on the screen are inverted. Other times one display will work, but the other is a digital version of a "salt and pepper" screen.
    Putting the computer to sleep & back awake will usually fix it, but sometimes it takes a couple of wake/sleep cycles for the display to return to normal.
    Anyone else experiencing this? Is this something I can fix, or do I have a graphics card issue? I've only had the computer for a couple of weeks now.

    I saw some posts about the screens not waking, I haven't experienced that. So far mine will always turn on, they are just either distorted colors or snow. I wonder if it's a related issue?

  • Any known ID CS5.5 issues with new MacBook Pro (mid 2012)?

    ID CS 5.5 Version 7.5.3
    Mac OS X Version 10.7.4
    MacBook Pro 13 in (mid 2012)
    ID crashes while deleting pages.
    No such issues with my previous MacBook Pro (mid 2009) or a 27 in IMAC (mid 2010). Same software versions. Any ideas?

    Yeah, I was kinda worried since it is new. I thought maybe I could somehow adjust the brightness on the screen to make the bottom and corners brighter. And perhaps it was a software issue that was causing the keyboard to malfunction. And definitely have no clue about the headphone jack noises. And the bent display. Hmmm. I guess I will call AppleCare.

  • Issues with mac pro 2014 and Adobe CC

    Having major issues with my New Mac Pro since installing 10.9.3.  The issues are with render in Adobe CC products and glitches on displays.
    Model Name:          Mac Pro
      Model Identifier:          MacPro6,1
      Processor Name:          12-Core Intel Xeon E5
      Processor Speed:          2.7 GHz
      Number of Processors:          1
      Total Number of Cores:          12
      L2 Cache (per Core):          256 KB
      L3 Cache:          30 MB
      Memory:          64 GB
      Boot ROM Version:          MP61.0116.B05
      SMC Version (system):          2.20f18
      Illumination Version:          1.4a6

    Well known issue and no solution yet. There is nothing wrong with your computer.  http://9to5mac.com/2014/05/21/os-x-10-9-3-breaking-mac-pro-graphics-card-compati bility-with-critical-pro-apps/

  • [UNSOLVED] Graphics Card Issues with Intel 945GSE

    I have several issues and im not sure if they are related to the same reason. But I think it all has to do with my graphics card not being detected right.
    I have a Samsung N310 with 1,6 Ghz and 2Gb RAM and am using Gnome. If i go to "System settings --> System information" it shows me "Graphics: unknown".
    Since my new installation i dont have an xorg.conf anymore, and i did not experience any disadvantages yet, but before my graphics card was detected as following in the xorg.conf:
    "Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)"
    In the Gnome System information it was not listed though, like now.
    This is not really a problem, but it made me think that my other issues could be related to the card being not detected right.
    Here are my real problems:
    When i am watching a video on my external monitor i have slight lags, which are really annoying to me,
    because im a big fan of a good picture!
    It is explicitly visible during pan shots or when cars a moving from the one side of the picture to the other.
    And the larger the file is, the worse it gets... The lag with dvds or large mkv-files is even worse and not watchable anymore!
    My machine should be capable of running a film on fullscreen on an external monitor though, at least it does under XP on the same screen. Flawlessly!! And since arch is a minimal system, it should work! I am experiencing these problems with gnome2 and xfce as well, so it cant be related to gnome3!
    Im also experiencing lags with the Gnome shell, for example when i move my mouse to the activities button in the upper-left corner or when i am moving windows with the mouse.
    And last but not least firefox is very laggy while scrolling. But since even users with faster machines experience slight problems of that matter with firefox, i dont think that this problem is related to my card.
    I could stand the issues with the Gnome shell and firefox, but i at least want to be able to watch a film with my computer!
    I hope that my computer isnt simply to slow...
    Greets
    Last edited by gunjah292 (2011-12-21 20:09:44)

    gunjah292 wrote:
    HAHA!! The trick was not to enable VSync but to disable it!
    I just changed the SwapBuffersWait Option to "false".
    I have around 300 FPS now and my video lag problem is GONE!!! Thanks for the tips! I will mark this solved now!
    Well, that's a surprise for me.  I had to enable VSync to stop video tearing with my Intel HD 3000 GPU (Sandy Bridge).
    From the Intel xorg driver man page:
    Option "SwapbuffersWait" "boolean"
            This option controls the behavior of glXSwapBuffers and glXCopySubBufferMESA calls by GL
            applications. If enabled, the calls will avoid tearing by making sure the display scanline is
            outside of the area to be copied before the copy occurs. If disabled, no scanline
            synchronization is performed, meaning tearing will likely occur. Note that when enabled, this
            option can adversely affect the framerate of applications that render frames at less than
            refresh rate.
    Default: enabled.
    Glad you got it sorted!
    Last edited by David Batson (2011-12-14 23:21:57)

  • Issues with Samsung 840 pro and MacbookPro mid 2012.

    I got a Samsung 840 pro 256GB SSD a few months ago. I installed it into my MacbookPro mid 2012 and it worked with no issues for two months. One day the drive pretty much crashed on me while I was using it. I tried connected the drive with a SATA to Thunderbolt adapter and the SSD worked with no issues. This led me to think the issue was with my mac, so I reinstalled the HDD I was previously using. I experianced no issues with this drive installed. Simply put, the SSD does not work if ONLY if it is connected to the internal SATA connection. I wound up RMAing the drive back to Samsung and recieved a new one today.
    I installed the drive and attempted to install OS X without success. After more troubleshooting I determined that, the brand new drive is experiancing the same issue: it does not work ONLY if it is conneced to the internal SATA connection. I spend an hour on the phone with Samsung, they have not heard of this problem happening. I called an independanta Mac repair shop and they told me it was the SATA cable (this is incorrect because other HDD's work). I went to the Apple store but they don't care about you unless you're willing to shell out big bucks or you have AppleCare.
    Somebody help!

    One possibility is that the model you have is intended for use with a SATA III 6.0 Gb/s interface whereas your computer only supports up to 3.0 Gb/s. If the new SSD is not downward compatible then it will not work properly.

  • Issues with Audition CC 2014

    Hi, Gang.
    I've been a user of AA since ver. 1.5.  There are still a lot I would like to see in the form of feature additions, and I have had nothing but good things to say about the program (having been a ProTools user since the dawn of daws) until recently.
    Lately, I've been experiencing a lot of sluggish behavior with the program, and I am posting this to make sure that it's not on my end. Here are the symptoms...please let me know if any of you can think of a direction to explore.
    (All of this started with the last update to CC 2014 - cannot say when that was, but within the last week to 10 days)
    1. when moving multiple clips of audio on a track in time or from track to track, after releasing the mouse button, an hourglass appears, and it takes MINUTES for the cursor to return, to be able to perform the next command.
         a. while this is happening, if I go to Task Manager to investigate what's happening, the "memory (private working set)" column is starting to creep up in RAM usage. When the creeping stops, the cursor returns - it got up to 20GB today (out of 32GB).
         b. further evidence of something being wrong - after EVERY command instruction, it takes at least a second for the action to be performed; this can be seen when the History window is open while performing commands.
    2. Video Playback Issues:
         a. I've now started to experience the video window goes black (while in Multitrack mode) if I just returned from Waveform mode.  The only way to get it to work again is to (1) rt-clk on video window ans set 100% Scaling then (2) rt-clk on video and set Best Fit scaling.
             It will continue to work until I go to Waveform mode, upon my return to Multitrack mode, I have to "reset the scaling" again.
         b. Video playback is stuttering, sometime taking 10 seconds to play normally [I have audio/video playing off of my 550+MB/sec internal RAID-0 array, 65% capacity]
    3. Random Crashing - session only contains 16 tracks and 6 busses   <--- Solved this with uninstalling CC 2014, reinstalling 2014 and NOT importing CC preferences (the issues above still remain).
         a. when switching to Waveform mode from Multi mode, CRASH
         b. importing from OMF, every 5th import, CRASH
    If anyone has any insight, please let me know.
    Thanks,
    -CS
    [AMD AM3 FX-8350 (8x4GHz), 32GB 1600MHz RAM, 120GB SSD system, 3TB Program/Data, 8TB A/V drive (4x2TB Seagate Barracuda SATAIII) Internal RAID-0 array]

    Yes, that's correct.
    Since the installation of the 7.0.1, both CC and CC 2014 are behaving badly. I want... I NEED to revert back to 7.0, but I no longer have the version option...unless you know where to get it.
    Aside from it never crashing or slowed down functionality, I really liked having video playback in Waveform mode that synced with audio as it appears in the multitrack session....great for Dx cleanup and audio restoration.
    This bug cost me $400 in billable time because of crashes and performance issues.
    I have a Director's Review session on Friday at 3pm, and I really need to get this solved ASAP.
    -CS
    PS. Audition CC never behaved like this either until the 7.0.1 CC 2014 install upgrade.

  • Multiple issues with new installation

    I have several issues with my fresh installation of arch (just got myself a free old-as laptop , thus trying out arch for the first time as I usually run gentoo), and I'm not sure where these should go. I figure that I may as well lump them all at once while I'm at it.
    The laptop model is a Toshiba Dynabook TX/430DX Japanese laptop similar to a Tecra A2 afaik.
    1. If I use stock ARCH kernel, when I load up x11 it seems to be using some wrong drivers or something. Tried with and without xorg.conf. The screen is all fuzzy etc. However, I compiled my own kernel (the Zen sources), took out a whole bunch of drivers I knew I wouldn't be using (etc. SATA/IDE/extra whatnot so that it would merely take 3 hours to compile the kernel), x11 works fine. HOWEVER with the zen sources, when I close x11 I can't exit to console. I get some sort of weird artefact from what happened to be on the screen, or it just goes black. It does actually seem to be in console as I can turn off the laptop with ctrl.alt.del and the capslock etc seems to work fine. I'm thinking of recompiling the zen sources with the stock arch kernel config when I have the time just to see what happens, but I'm not too sure it'd help.
    The VGA device is an: Intel Corporation 82852/855GM Intergrated Graphics Device (rev 02), using the intelfb module.
    2. In most consoles I've used, if you type in part of a command then press ctrl.up/down, it autocompletes with previous commands you've run matching what you've already entered. However, in my install it brings me to the very first command in my bash history. How do I make it autocomplete previous commands?
    3. When I use wvdial (I have a mobile modem), I get odd characters as shown in the screenshot posted.
    I don't think it's a unicode issue, as ncmpcpp displays properly. This displays itself both in the console and in x11 (screenshot).
    4. If I'm using the stock kernel and I stop wvdial, I get a whole bunch of kernel error trace messages. After this, anything that goes to dmesg will be displayed to whatever terminal I'm on (but not actually echoed, it gets overwritten if I change screen etc). Wvdial is also prone to crashing, sometimes taking out the whole laptop. However, while using the zen kernel I do not suffer this issue at all.
    Any help in helping me find the source of these issues would be greatly appreciated. They're not showstopping issues, but extremely irritating nonetheless.
    Thanks in advance.
    EDIT: I created a zen kernel based on the arch stock kernel. Unsurprisingly, I still suffer from the x11 video issue. However, I don't have issues with number 4.
    Last edited by ugugii (2009-06-14 00:57:37)

    People are probably going to want to know the make/model of the lappy before they can
    help.
    Deej

  • Graphical mapping issue with useOneAsMany if segment does not exist

    Hi all
    I have an issue with graphical mapping in an IDoc to file scenario. I need to have header level fields mapped to line item fields. Whether or not and how many source header segments of the same type exist depends on a qualifier (QUALF). This is generally working if I use the following graphical mapping:
    if QUALF = 001 then <source>  ->  removeContext  ->  useOneAsMany  ->  splitByValue  ->  <target>
    ... with setting QUALF, <source>, and the second input for the useOneAsMany to the highest possible context node.
    Nevertheless, if the segment with the qualifier 001 does not exist in the source then the mapping throws the error "Too few values in first queue in fuction useOneAsMany". Whatever I've tried, the mapping wants to execute the useOneAsMany statement anyway and I haven't found a way to omit this. Whether the target would be created with an empty value or not created at all would be secondary. Would eventually somebody have a solution to this problem?
    Thanks in advance,
    Daniel

    Daniel,
    try using mapWithDefault function before useAsmany
    if QUALF = 001 then <source> -> removeContext -> <b>MapwithDefault</b>->useOneAsMany -> splitByValue -> <target>
    I think it takes care even if the value occur in the contaxt or.
    Babu

  • Idoc flatfile to IDOC xml issue with new PI7.11 module SAP_XI_IDOC/IDOCFlat

    Hi,
    I am trying to develop a scenario as mentioned in the blog using the new module available in PI7.1,but I am getting this error
    "Error: com.sap.conn.idoc.IDocMetaDataUnavailableException: (3) IDOC_ERROR_METADATA_UNAVAILABLE: The meta data for the IDoc type "ORDERS05" is unavailable."
    I have made every configuration correct and IDOC meta data available in both SAP R3 and PI,but it is still complaning about the meta data does not exist.
    Blog:  http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/13743%3Fpage%3Dlast%26x-order%3Ddate
    did anybody face issue with the new module available "SAP_XI_IDOC/IDOCFlatToXmlConvertor",please help me or give me mre information why I am getting this meta data error.
    Thank you,
    Sri

    Hi Sri,
    To Convert IDOC Flat file into IDOC xml from the given blog, the IDOC flat file should be present in standard format like:
    E2EDK01005                    0000047110815000000000001.........
    E2EDKA1003                    0000047110815000000000002.........
    E2EDKA1003                    0000047110815000000000003..........
    E2EDKA1003                    0000047110815000000000004........
    The Flat file have relationship as IDOC Number "000004711081500000" and segment sequence "0000001".
    If your flat file is not in this formate so i don't think that module is able to convert into IDOC xml. and if your file is already in this format then it may be issue with destinations which are created in NWA.
    Thanks
    Harish

Maybe you are looking for

  • How do i add a new movie to iTunes on my imac

    I have Yosemite, I am sorry to say, can no longer do simple things like add a movie to iTunes on my iMac. Any help???

  • How to set CAM Mode background wallpaper

    Hi forum users, Where can i download or find the "xv" application ? Thanks. # Yours Sincerely, # Mohamed Ali Bin Abdullah. Anthony Worrall wrote: In chapter 10 "Control Access Mode" of the "Sun Ray Server Software 3.1 Administrator's Guide for the So

  • Reboot air no itunes needs qt 7.7.5

    reboot mac air, now itunes wont open unless quicktime upgrade 7.7.5

  • App image size on Ipad?

    Hi All, I'm having an issue with few apps which were mentioned as configured for IPad as well as other devices, but that are now showing in the IPhone apps only. after installation, the apps run, but the picture is a quarter of the IPad screen size.

  • IE opens at logon

    My company has a web filter gateway that all external traffic must pass through.  This gateway requires AD authentication.  With our new Windows 8 clients, it appears that windows does a check for internet access, and when it encounters our gateway r