Graphics card and RAM suggestions for editing RED footage?

Hi there,
I'm planning to edit a project shot on RED at 4K in Premiere CS6.
In terms of system requirements I would be interested to hear what the potential is (and what differences I will see between) these two options:
RAM: 8GB vs 12GB
Graphics: 2GB Nvidia GeForce GT 650M 130W (or eqivalent) vs 3GB Nvidia GTX 670MGDDR5 (or equivalent)
Many thanks if you can help and if you require any additonal information please let me know

The starting limitation is the slots. System boards on laptops are not standardized like they are on desktops. What that means is a system board in a laptop is designed specifically for that shell. If that systemboard only has a limited amount of ram slots then that permanently limits the features.
The laptop you linked only has 2 ram slots. The laptop I linked has 4. So you can upgrade the ram further in the laptop I recommended and can be done post sale.
The other factor is bios memory mapping. Many laptops are limited to 4GB sticks as the maximum supported ram because the bios is not programmed to handle 8GB sticks. This can happen on desktops as well but is far less likely.
The Laptop you linked lists 4GB sticks as the maximum supported ram. The laptop I linked includes support for 8GB sticks. Now at some point the manufacturer can update the bios to include support for higher density ram. So Dell could add support for 8GB sticks on the laptop you linked. However don't assume that. Verify before you purchase.
Hope that helps.
Eric
ADK

Similar Messages

  • Upgrading graphics card and ram on late 2011 macbook pro?

    Hi. I have a late 2011 macbook pro, and I wanted to know if i could upgrade my graphics card and ram for better performance while gaming. I play WoW and diablo 3 and often notice lag and can only run on low settings. So my graphics are Intel HD 3000 which is integrated, and i was wondering if i could upgrade to a graphics card like AMD or nvidia. Also, would upgrading from 4 gb of ram to 8gb of ram help my performance? Thanks.

    You cannot upgrade the graphics card on your MBP. It is soldered to the logic board.
    RAM can be increased to 8 or 16 GB.  The correct specifications are;  204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM.
    The best vendors for Mac compatible RAM are OWC and Crucial.
    Ciao.

  • Graphics Card and RAM ???

    Hi, i Have a HP mediacenter Pavilion a1606n, i am a bigg gamer but my computer sucks at plaing most new games, i suspect that the Graphics card is out dated, or i dont have enough RAM, but when ever i play a game (ex. Hitman Blood Money) it is very slow and does not display any of the walls or floors (this is with the settings set on low), what can i do to make my computer play games better???

    Graphics card and RAM are the two components to upgrade when you're looking to play games. I checked the specs on your computer - you have a PCI Express x16 slot, which means you can use any of the most recent graphics cards in this particular system. You also may want to pick up some DDR2 RAM to upgrade the memory. And depending on which graphics card you upgrade to, you may also need a new power supply as well. Most Best Buy stores carry all of those components, so head to the store (you can bring your computer with you if you'd like Geek Squad to install the parts for you) and ask a Geek Squad Agent for advice on what to do with your computer.

  • Graphics card and ram question

    I am currently using a Toshiba Satellite L305D and i am trying to play arma 2 on it. But whenever i try to play the game is very slow and laggy. Is this due to my graphics card or ram? The gameplay is just very laggy. I need some help because i dont know what to upgrade in order to make this laptop a better gaming laptop even though it is not intended to be a gaming laptop. What things do i need for me to make it a gaming laptop? Better graphics card? more ram? better processor? Please help!!!

    Hi there! The only thing you can really upgrade is the RAM on the notebook.
    Adam
    Best Buy Community - Retail, Americas
    Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
    *Remember to mark your questions solved and click the star under the user's name to show your thanks!

  • Need help with buying graphics card and ram for MSI 865PE NEO 2-V

    Hi,
    I want to buy 1GB of ram for motherboard MSI 865PE NEO 2-V I need help with finding correct parts.
    I also want to buy 512Mb or 1GB graphics card.
    as i said before i need help with finding correct ones so they match motherboard, I would appreciate if any one would post link to cheap and fitting parts.
    I found graphics card allready, i just need to know if it will fit.
    the card is
    NVIDIA GeForce 7600 GS (512 MB) AGP Graphics Card
    Thanks for help.

    here you can see test reports for your mobo:
    http://www.msi.com/product/mb/865PE-Neo2-V.html#?div=TestReport

  • MOVED: Need help with buying graphics card and ram for MSI 865PE NEO 2-V

    This topic has been moved to Retired motherboards.
    https://forum-en.msi.com/index.php?topic=163057.0

    here you can see test reports for your mobo:
    http://www.msi.com/product/mb/865PE-Neo2-V.html#?div=TestReport

  • Which MAC Pro graphics card and how much RAM for FCE HD usage?

    I plan on purchasing a MAC Pro afer MacWorld Expo next month. Any recommendations for a specific graphics card that would complement my usage of Final Cut Express HD 3.5?
    Also, should I increase my RAM? I currently use 2 gb of RAM on my G4. Will I see greater productivity if I bump it up to 4gb of RAM on the MAC Pro or will 2gb suffice which I had planned to increase it to from the standard 1gb supplied?
    PowerMAC G4 dual 1.42ghz Mac OS X (10.4.7) 2gb RAM, 3-LaCie FW800 external drives
    PowerMAC G4 dual 1.42ghz   Mac OS X (10.4.7)   2gb RAM, 3-LaCie FW800 external drives

    Any of the graphics cards that Apple sells for the Mac Pro will be fine. Personally, I'd suggest choosing one with at least 128MB video RAM, 256MB would be better.
    2GB RAM in your Mac Pro will be more than enough for general purpose video editing. Going to 4GB will give you more oomph for RealTime effects and somewhat for rendering but you won't see a big difference in regard to capturing or general editing in the timeline.

  • Mac Pro  Graphics card and Motion 5

    I purchased my Mac Pro in 2007,  It is 2x 2.66 GHz dual core with 12 GB 667 MHz DDR2 F8-DIMM
    My grahpics card is Radeon X1900.
    Is this sufficient for Motion 5 and will I see a difference in speed, etc from Motion 4.
    Also, is it possible to upgrade my graphics card to say, ATI 4870 to improve graphic performance all around?   I have a real problem with complex graphics and usually cannot see them in full render until I compress the project.
    Thanks,
    Sandra

    Any of the graphics cards that Apple sells for the Mac Pro will be fine. Personally, I'd suggest choosing one with at least 128MB video RAM, 256MB would be better.
    2GB RAM in your Mac Pro will be more than enough for general purpose video editing. Going to 4GB will give you more oomph for RealTime effects and somewhat for rendering but you won't see a big difference in regard to capturing or general editing in the timeline.

  • Which graphics card/laptop to buy for Elements13?

    Hi,
    On my laptop rendering/saving a 3:30 minute video takes about 15 - 30 minutes. I'm about to buy a new Windows laptop, is there any specific graphics cards and CPU that would make rendering and saving the fastest possible?
    Thank You, Miki

    nemethmiklos wrote:
    Hi,
    ..... I'm about to buy a new Windows laptop, is there any specific graphics cards and CPU that would make rendering and saving the fastest possible?
    Thank You, Miki
    Miki,
    As John Smith suggests, I've not found a Nvidia Graphics card to do anything special with PrE.
    I had a Toshiba Laptop with an i5 and slower HDD.  It pretty mutch mached your performancd.
    I now have an ASUS "gamer" that I've never played games on.  I bought it a couple years ago for PrE.  "Gamers" from ASUS seem to have specs like workstations from HP, but are a lot cheaper.
    It has an i7, a lot of RAM, a 7200 RPM HDD and a SSD.  I have installed all the software on the SSD that is important, installed the less important software on the HDD and have saved about 80GB on the SSD for video projects.  I use USB 3.0 external drives for extra media storage and backups.  In other words, the SSD does everything for video editing.  It works and is speedy.  I've tried putting the temp files and source video files on the HDD and saw no noticeable improvement in speed.  If I do enough with effects, transitions, adjustments, mixed media, etc, the "speedy" can be less so.  It even works with my brand new 4K footage.  
    I think the three keys for speed are an i7, lots of RAM and an SSD.

  • I have CC and while attempting Light Effects, the Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Ple

    I have CC and while attempting Light Effects, the Light Effects Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Please help!
    I tried to delete the layer attempt again. I am in a Photoshop class, but the work is all online, so all my teacher is going to do is send me to this site. I am trying to edit a photo for this class, and without this working, i go to filter>render>light effects. the bar and panel will pop up for about 2 seconds, then disappear. How do i get the options bar and properties panel to display?

    I was about to suggest resetting LE from the Workspace drop-down top right corner, but if you can't see the Options Bar, I guess that is not going to happen.  The normal Tool reset is grey out for LE, so it might be a case of resetting Preferences.
    Reset Preferences
    Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
    Mac — Hold down Shift Cmd Opt immediately after starting Photoshop

  • Upgrading Graphics Card and Processor

    I'm wanting to upgrade my graphics card and processor. Now I don't play many games, but I would like to max out LOTRO and maybe some games on steam like portal/doom3/etc...
    My motherboard is an
    Manufacturer: Foxconn H-RS880-uATX
    HP: Aloe-GL8E
    I've already decided I'm upgrading my processor to the Phenom II X4-830. Right now I have the AMD Athlong dual core 3.0ghz.
    And I'm upgrading my RAM from 4GB to 8GB this week.
    The only thing I'm having a hard time finding is what the best graphics card I can get for my motherboard. I've checked all the FPS benchmarks for the ones HP recommends, but they don't seem better than what I have now which is the ATI Radeon HD 5450 512MB.

    Welcome to the HP Forum!
    Jimmynidas wrote:
    I'm wanting to upgrade my graphics card and processor. Now I don't play many games, but I would like to max out LOTRO and maybe some games on steam like portal/doom3/etc...
    My motherboard is an
    Manufacturer: Foxconn H-RS880-uATX
    HP: Aloe-GL8E
    I've already decided I'm upgrading my processor to the Phenom II X4-830. Right now I have the AMD Athlong dual core 3.0ghz.
    And I'm upgrading my RAM from 4GB to 8GB this week.
    The only thing I'm having a hard time finding is what the best graphics card I can get for my motherboard. I've checked all the FPS benchmarks for the ones HP recommends, but they don't seem better than what I have now which is the ATI Radeon HD 5450 512MB.
    Please identify your HP desktop with its product name. Is it a Pavilion p6230y desktop?
    In the HD 5000 series  the 5750 is definitely better than a HD5450. 
    The HD6850 would definitely do the trick, but you would also have to upgrade your PSU to something beefier.
    The Phenom II X4-830 will have to be a Deneb core for it to work with your motherboard.
    If your operating system is a 64-bit one then upgrading RAM to 8GB  will be worthwhile.
    If the OS is 32-bit then you will be wasting your hard-earned money since the OS was designed to use only @3.25 GB of RAM.
    Kind regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Which Graphics Card do I need for H520S

    I have a few questions for you lovely people out there and hope you can help.
    My son has asked me for a new Graphics card for his PC.(Not a xmas present)
    On an old post it was suggested that an Nvidia Geforce GT620 1Gb or an AMD Radeon HD7570 2Gb were the ones to go for. Is this still the case or are there newer/ better cards available.
    I have a reasonable budget of £100 ($160)
    If these are the cards to upgrade his PC with, will I need to upgrade the PSU? If so what unit do you suggest.
    I would need the graphics card and PSU combined to be near my budget.
    Lastly, Is it easy to install the graphics card and PSU (If needed) myself or would I need specialist help.
    Hoping you can help
    Happy Christmas
    Mark

    so i now need a new graphics card so i only have to use the new Mac mini port connecting cable, but which card to buy and should i remove the older card.
    Replacing the graphics card will do nothing to help you unless your current card doesn't have a dual link DVI port (most all 2 DVI port G5 cards do have at least one dual link DVI port).
    There are NO graphics cards that will work in the G5 that have mini display port.
    I don't want to use multi cable connections 
    Using a dual link DVI port from a G5 graphics card, connection to the iMac via the Atlona adapter is the only way to achieve use of the iMac as a monitor with a G5.
    http://www.atlona.com/Atlona-Dual-Link-DVI-to-Mini-DisplayPort-Converter-USB-Pow ered.html

  • Graphics Cards and CS5?

    Hello there I am currently in the process of purchasing a new notebook as I may be going into graphics design this fall.  I assumed CS5 was a graphic card intensive program.  Other places on the net some people say a beefy graphics card is not necessary for CS5 as it would not really affect performance, but a beefy processor and RAM is a must.  So can I get a verdict, would Intel  interated GMA cards be terrible to run CS5 with, or would performance be unaffected?  Plus I'm kinda confused with the whole OpenGL thing, I've been reading it's not necessary and CS5 runs better with it off?

    For OpenGL see this:  http://go.adobe.com/kb/ts_kb404898_en-us
    And this lists tested graphics cards: http://go.adobe.com/kb/ts_cpsid_83117_en-us0
    With a laptop you need a discrete graphics card (not on board graphics sharing RAM).
    Also lots of RAM and the biggest HDD you can get. (Preferably two).

  • Graphics card and motherboard bios

    i have recently purchased a hp pavillion p6 2371ea, trying to play a game i realised the new pc was not up to spec. having now bought a nividia gtx 650 ti im struggling to get it to work. the machine already has an intergrated graphics card in it. ive tried to find the right option in bios to disable the intergrated graphics card. the problem is the joshua h61-uatx motherboard doesnt have the option of the graphics card and the ability to disable it. any ideas as to how i can over come this issue?

    Here are the specs for your HP Pavilion p6-2371ea Desktop Computer. According to the specs, this model shipped with Windows 8 and a 300 watt power supply. To use the GTX 650 Ti you will need to upgrade the power supply to a 500 watt or 600 watt unit. The Corsair CX500 and CX600 are known to fir most HP comsumer desktop computer cases and come highly recommended. The next thing you need to do is DISABLE "Secure Boot" and ENABLE "Legacy Support" in the BIOS. Doing these things should resolve your issue.
    See THIS similar HP forum thread for conformation of your issue.
    Please send KUDOs
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Graphics card/video ram

    I have done a fair job souping up my Pismo, which I love and don't really want to replace. Despite maxing out RAM at 1 GB and installing large hard drive (160 GB)and using Quicktime pro and latest Windows Media player, when I view video from the web, its always jumpy and out of synch. Is there a way to upgrade the graphics card and/or upgrade video RAM such that streamed video plays better? Would things be better with a processor card upgrade to G4? Is there something maybe I can use in the PC slot on the side?

    A G4 upgrade would definately make a difference in video playback performance. I went from 400 MHz G3 to 550 MHz G4 with my Pismo, and what was jumpy before (like xvid) runs smoothly now, at only 70% CPU usage. I use VLC which is optimized for Altivec, and that's probably part of the reason for why it runs so well. I'm not sure if QT and WMP would benefit from the G4 in the same way. Youtubes are somewhat jumpy on my pismo.
    It has 1 GB of memory and a pretty slow 4200 rpm drive. By the way, does your pismo see the entire 160 gig drive? I'm thinking a computer this age would be limited to 128 GB.
    While the G4 upgrade is a major speed-bump, and was a good idea two years ago when I upgraded, it's really not worth it today. Not unless you find one on eBay or something.
    And yes, a graphics upgrade would be great, but it just won't happen.

Maybe you are looking for

  • Problem with starting Crystal Report document from SAP Gui

    Dear all, in Crystal Reports I created my first report (based on a BW query), which is executed successfully, when I run it directly from CR or from Infoview. The report is stored directly in BW and has been published successfulyl to BOE. If I try to

  • How Do I Relink Footage That's a Higher Resolution Than What I Edited With?

    I'm working on a short film in Premiere Pro 6 that was shot on a RED Scarlet. When I began the project, the computer I was working on couldn't handel playing r3d files in Premiere in 1/16th resolution, so I made 1080p exports of all the footage and b

  • Has anybody successfully upgraded to OS X 10.8.2?

    Today (November 17th, 2012) I've purchased the latest Apple Mac mini (i7). It shipped with OS X 10.8.1. I wanted to update to the now latest OS X 10.8.2 but unfortunately I can't. It doesn't shop up under Updates in the App Store, nor does a manual i

  • Base64 to Blob

    Hi guys, I am not an oracle expert. I am trying to insert a base64 data into a Blob. I was trying to use : INSERT INTO MyDB.EXCELFILETABLE(FILELID,SPREADSHEETDATA,OWNER) values ( 1, utl_encode.base64_decode(utl_raw.cast_to_raw(b64Doc)),'owners' ) b64

  • GZip error in Solaris 9

    I have wrote a program using GZIP to compress data, it work well in Solaris 2.6 with any any version of JDK. But recently we plan to migrate the OS to Solaris 9, and I found the program nolonger work now, it throws out a java.io.Exception : not a GZI