Graphics Card Does Not Show Up In Device Manager (Re: Installing AMD Video Drivers - Windows 8.1 (Step-By-Step Tutorial)

This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
Method 1:
First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
Hardware devices are not working or are not detected in Windows.
http://support.microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
Press the Windows key + X
Select Command Prompt (Admin)
Type set devmgr_show_nonpresent_devices=1 and hit enter
Type Start DEVMGMT.MSC and hit enter.
Once in Device Manager hit the View menu and select show hidden devices.
From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
After you install the drivers, reboot and see if you get any different results.
If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
Method 3:
If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

Similar Messages

  • W520 Smart Card reader does not show up in Device Manager

    W520 Smart Card reader does not show up in Device Manager.
    It was working before and now nothing.  Nothing happens when SD card plugges in.
    Could my smart card reader stop working or is this a configuration issue?
    Any thoughts?
    thanks
    Ian

    Hi  Ian,
    Welcome to the community, and thanks for the post.
    The issue is related with software, to resolve this you need to re-install the card reader driver from the below mentioned web link.
    http://support.lenovo.com/en_SG/downloads/default.page?
    After that check if the issue get resolved.
    Regards,
    Sameer
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • My Laptop Pavilion 9700 will not recognize DVD/CD drive. Does not show up in Device Manager

    My laptop Pavilion 9700 will not recognize the DVD/CD drive:
    The drive does not show up in the Device Manager’s list:  The disk spins and the light is on: Use a
    paper clip to open the door;  I updated
    to Sevice Pak 2 recently, but I am not sure if this has anything to cause this
    problem:  Please Help, anyone!
    Thanks

    Hi,
    Follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run from the CD without the need to install on your HDD.  This will show whether the problem is with Windows or a Hardware problem with the optical drive.
    http://www.ubuntu.com/desktop/get-ubuntu/download
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Sound and audio does not show up in device manager hp pavillion dv6500

    No audio output device installed. Sound and audio not listed under device manager hp pavillion dv6500 system bios f.2a-02/22/2008

    Hi @Cynthia0 
    I understand that you have no audio device showing up in device manager.  I am happy to help you with this.
    Please post the full product number for your notebook. See the following, if you need help with that information.
    How Do I Find My Model Number or Product Number?
    Once I have that, I can find the proper driver and support page for you.
    For now check through this page: Resolving No Sound or Audio Problems (Windows Vista)
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • URGENT Lenovo g550 webcam does not show up in Device Manager and all drivers cannot be installed

    Hello everyone. So my lenovo g550 webcam stopped working after I did a clean install of windows 7 home. When I go under device manager I do not see any unknow devices. When I also go to show hidden devices it is not there. Could anyone give me information about how to fix this and if the cable to the webcam might be broken. If so, is there a way I could convert the webcam's pin outs to usb to test it. I have split an old usb cable into four colored spots. Not sure if i want to test it though. That would be my last resort. If needbe, can you tell me the pin outs for the webcam. It has five connectors. The reason I know this is usb is because my older installation on windows 7 detected it and said that the usb could be faster. Thanks.

    Sorry about that. I've only been a member for a few days. I will remove the post with all Capps. Have a nice day!

  • T61p - IEEE 1394 (Firewire) port does not show up in device manager in Windows 7 x64

    I have a T61p.  On the front, in the left corner, right next to the wireless on/off switch, is a IEEE 1394 (Firewire) port.  However, if I plug anything into it, it's not recognized by Windows, and if I go into the device manager in Windows, there is no IEEE 1394 host manager or ports or anything listed there.
    I have rebooted and gone into the BIOS, and I don't see anything in there about 1394 either.  Is the port there, but the hardwire inside is missing?  Do I need to enable it somehow?

    Let me clarify that.  I have something in the device manager called "SD Host Adapters", and under that "SDA Standard Compliant SD Host Controller".  That thing has a Microsoft driver.
    However, under "IDE ATA/ATAPI contollers", I do see "Ricoh Memory Stick Contoller", "Ricoh SD/MMC Host Contoller", and "Ricoh xD-Picture Card Contoller".
    I also have "PCMCIA adapters" that has "Ricoh R/RL/5C476(II) or Compatible CardBus Contoller".
    So, it would seem I have the right drivers for the card reader, I'm just missing anything for the IEEE 1394 contoller...

  • After updating to lion installed graphics card does not meet minimum requirements for aperture

    Hello,
    I updated to OSX lion yesterday. and Apterture is given me this error message.  "The installed graphics card does not meet the minimum requirements for Aperture.   I tried the Option Command Open app thing to try rebuild the database.  But nothing happens when I try opeing the app using those combo key's  So I removed the app using mackeeper and tried reinstalling it. still same issue.
    I have following machine
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro8,2
      Processor Name:          Intel Core i7
      Processor Speed:          2.3 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          8 MB
      Memory:          8 GB
      Boot ROM Version:          MBP81.0047.B0E
      SMC Version (system):          1.69f1
      Serial Number (system):          C02F94ETDMGG
      Hardware UUID:          132AE53D-0766-5E17-9F54-ED935D6F7AB3
      Sudden Motion Sensor:
      State:          Enabled
      Chipset Model:          AMD Radeon HD 6750M
      Type:          GPU
      Bus:          PCIe
      PCIe Lane Width:          x8
      VRAM (Total):          1024 MB
      Vendor:          ATI (0x1002)
      Device ID:          0x6741
      Revision ID:          0x0000
      ROM Revision:          113-C0170L-521
      gMux Version:          1.9.23
      EFI Driver Version:          01.00.521
      Displays:
    Color LCD:
      Resolution:          1680 x 1050
      Pixel Depth:          32-Bit Color (ARGB8888)
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Built-In:          Yes
    VX2245wm:
      Resolution:          1680 x 1050 @ 60 Hz
      Pixel Depth:          32-Bit Color (ARGB8888)
      Display Serial Number:          QD0064002266
      Mirror:          Off
      Online:          Yes
      Rotation:          Supported
      Adapter Type:          Apple Mini DisplayPort To VGA Adapter
      Adapter Firmware Version:          1.03
    Display Connector:
      Status:          No Display Connected

    HAve you tried disconnecting the external monitor rebooting and then runnig Aperture?

  • HT4007 The installed graphics card does not meet the minimum requirements for Aperture.

    The installed graphics card does not meet the minimum requirements for Aperture.  I have not used Aperture in a while and just got this error message.  I tried applying OS updates and reinstalling Aperture and still get the same message.  Does anybody have a solution or work around.

    Are you using a non-standard Graphics Cards?  Then this may be the reason.
    You may also get this error message, if you accidentally booted into "Safe Boot Mode". Then certain extensions of the Graphics card will be disabled and Aperture cannot be launched.
    Reboot and make sure that you this time will boot into regular boot mode.
    See: Mac OS X: What is Safe Boot, Safe Mode?
    If you are indeed running the system in Safe Mode, the question is, what made this happen? Do you use a wireless mouse and keyboard? There is a strange bug that makes Mac OS X boot into Safe mode, if you turn the wireless devices on, while the system is booting. Make sure they are active, before you boot.
    But if you did not boot into Safe Mode, you could try to boot into this mode to reset the graphics card and then boot again into regular mode.
    Merry Christmas!
    Léonie

  • My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.

    My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.

    Hope this helps:
    http://www.apple.com/support/iphone/assistant/itunes/

  • Installed graphics card does not support the opengl features recommended

    I've installed FCP6 on my PowerMac (PPC G4 DP 1.25GHz), and when I run it, I get a warning ("...installed graphics card does not support the opengl features recommended...") and the program ends. The graphics card is the ATI Radeon 9000 Pro (64MB)
    I'm looking for a definitive answer regarding my hardware compatibility with FCS2 (specifically, FCP6). I'm NOT looking for an answer along the lines of: your system is too old to run this.
    I've checked the minimum system requirements from the apple website (http://www.apple.com/finalcutstudio/specs/
    and http://www.apple.com/finalcutstudio/download/):
    * A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
    * 1GB of RAM
    * An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
    * A display with 1024-by-768 resolution or higher
    * Mac OS X v10.4.11 or later
    * QuickTime 7.3 or later
    * DVD drive for installation
    I have all that stuff. What I'd like is to know which component of my system is FCP6 complaining about (vis-a-vis the error message above), alternatively, if someone has had success with a similar configuration, I'd like to know anything they think might help.
    Thanks in advance for any helpful advice you may have.

    The minimum would probably be an nVidia Fx5200 or an ATI 9600...
    Patrick

  • I have a macbookpro. when I connect any camera to the mac it does not show as a device. How do I load my pictures to either iPhoto or Aperture? It worked before but just stopped working. Any suggestions?

    I have a macbookpro. I use Aperture and Iphoto. When I connect any camera to the Mac it does not open it as a device in Iphoto, Aperture or in Finder. It use to work but just stopped. Any sugestions?

    Here is the full story. It may be long so please bear with me. I take a lot of pictures and movies. Since I have over 30,000 pictures I decided to place the Iphoto library on an external drive to save space on my internal drive since ot was getting very full. After I did that it worked fine for a while. Then one day I could not open the Iphoto library. Since I was overseas at the time I brought it to the IStudio ( not an Istore) overseas. They said to rebuild the library and they would do that for me. It took all day since I had so many pictures. When they called me and told me it was ready, I went to pick it up. They started to show me the new library. It crashed again. Not knowing how to fix this at the ISudio, they installed Aperture and imported the Iphoto library. This worked fine for a short time.When back in the states, it crashed again just like Iphoto. I took it to the IStore. They did not know why the overseas Istudio did what they did what they did  and rebuilt my aperture library. Again it worked fine. Now that I am overseas again. It crashed again. However, I concluded that the reason for these crashes is becuase I have the file on an external drive that derives its power from the Mac and not by itself. When I use it and stop for a while the MAC will go to sleep and this cuases the external drive to shut down. This then causes the library to have inconsistancies. Therefore, when it happened this time I tried to repair the library and after 36 hours it would close down Aperture. Therefore I decided to rebuild the library. That did not work either. So I tried opening the Aperture library with Iphoto. That seemed like it was going to work but after importing half of the 30,000 plus pictures. I photo shut down. I then made a new aperture libary and erged the old library with it. This worked. I now have an aperture library that works. However, when I plug my camera into the MAC nothing happens. The camera does not show up in devices in either Aperture, I photo nor in Finder. The USB port and cord I use works fine becuase I can read my external hard drives fine. I checked as SIG suggested in this thread and everything is set to open aperture when the camera is connected.
    I have the newest OS version 10. 7. 2 and the computer frequently updates all my programs. I have not installed any ne software lately. The problem happens both if I am on battery or plugged in. Just before I came overseas the IStore replaced the Battery.   I can go back to the IStudio  here overseas but the last time I was there and told them about the problem ( I did not have my computer with me) they did not impress me with their wisdom. I will be back in that city in a month and can go there if need be.  Thanks for all the help so far. God bless.

  • What causes iphone 3gs every time I insert the SIM card does not show the screen or no service?

    what causes iphone 3gs every time I insert the SIM card does not show the screen or no service?

    If the iPhone was unlocked unofficially, it has been locked to original carrier again.

  • Error: The installed graphics card does not meet the minimum system requirements by Aperture

    I have a Mac Pro 3.1 10.5.8 and Aperture 2.1.4.  My NVida 8800gt with 512 mb was over heating so I brought and install the ATI radeon hd 5770 to replace it.  Now when I try to start Aperture I get this message "Error: The installed graphics card does not meet the minimum system requirements by Aperture".  All other software works fine, ie photoshop elements and Safari.  When I install my old card aperture will open with no problem, but of course the card will overheat within 10 mins and I will have no video.  I have search on google with no luck.  Will upgrading to Aperture 3 fix this problem?

    5770 requires 10.6.5.
    The 8800GT - there is the 350* bake in over 10 minutes - 50% or better chance
    you can find 8800GT on http://myworld.ebay.com/macvidcards/
    http://www.macupdate.com/info.php/id/23049/smcfancontrol
    http://www.bresink.com/osx/HardwareMonitor.html
    Fan control helps with FBDIMMs which need to be kept under 70C too.

  • Just got this error message - The installed graphics card does not meet the minimum requirements for Aperture

    Help.  I have an iMAC - not even one year old - just got this message - The installed graphics card does not meet the minimum requirements for Aperture.
    I have not made any changes to my machine. Help  - I can't get to my images

    Try restarting your system.
    If that does not help, we will need to know your Aperture version and MacOS X version. And do you use an external monitor? Then disconnect it before rebooting.

  • Help - just got message "The installed graphics card does not meet the minimum requirements for Aperture"

    Help - just got message "The installed graphics card does not meet the minimum requirements for Aperture"

    Please click Profile Update and follow the directions for updating your profile. Your computer may be too old to support Aperture however without knowing anything about your iMac it's impossible to say. Also there is an Aperture forum to use and you can look at Aperture's System Requirements below to see if you have the minimum.
    System Requirements
    Minimum
    One of the following Intel-based Mac computers:
    Mac Pro
    MacBook Pro
    MacBook
    MacBook Air
    iMac
    Mac mini
    Operating system:
    Mac OS X v10.5.8 or v10.6.2 or later
    Memory:
    1GB of RAM
    2GB of RAM required for Mac Pro
    Other requirements:
    DVD drive for installation
    1GB of disk space for application and documentation
    7GB of disk space for Sample Library

Maybe you are looking for

  • Why can't I view my edited projects in the documents after saving from PSE10?

    Aftrer I work on a project and save it, it is unable to be opened as a file in the document folders on our server. I can still open and view it in the photoshop program but not on its own. Thus, I cannot attach the finished products on web sites, etc

  • Iphone 5 wifi not stable/wifi range issues

    I know there are loads of discussions but every discussion that I went through seemed without any solution. I have just bought a new iphone 5 considering that my iphone 4 broke down.  With the iphone 4 I have never had any wifi instability even on th

  • Eclipse-jcop project building { create .cap file } problem??????????????

    hello all, I am using jcop tool plugin with eclipse and my atr is:- --Opening terminal /card -a a000000003000000 -c com.ibm.jc.CardManager--Waiting for card... ATR=3B E9 00 00 81 31 FE 45 4A 43 4F 50 34 31 56 32    ;....1.EJCOP41V2     32 A7         

  • SQL Developer Hostname - Network Error

    This is a pretty simple question that I am stumped at the moment I installed Oracle on my local desktop with SQL developer When first setting up a connection it asks for "host name" Thus far, "localhost" works and 127.0.0.1 works when I "test connect

  • Types of Exits

    Hi all, Can anyone provide details abt these types of exits please? 1)MENU EXITS 2)FUNCTION EXITS 3)TABLE EXITS 4)SCREEN EXITS 5)KEYWORD EXITS 6)FIELD EXITS If there are any more types of exits pls do mention. Thanks in advance.