Graphics card for old box

Hello All-
My playback in PE9 is very choppy, with a lot of frames being dropped, especially after effects (green screen). Even after rendering it has a stutter.
I know that I need a computer with more processing power to get the most out of PE9, but my pocketbook doesn't allow me to spring for that right now. I am wondering what power supply/graphics card combo I could get for right around $100-$120 total that would improve my playback somewhat - at least so I can try to do a reasonable editing job for the next several months. I'm pretty sure it has PCIe slots.  Here is my current setup:
HP Pavillion a1430n
AMD Athlon 64x2 Dual Core Processor 3800+
350 Gig HD
2 GHz  3 Gig RAM
Windows XP SP3
Graphics (integrated): Nvdia Gforce 6150LE
Power Supply: 300 Watt
Any opinions or suggestions welcome!
Owl Boy

Friends-
To answer the questions you had regarding my current system and recording options:
SYSTEM:
CPU upgradable? I am pretty sure that it cannot be upgraded. Tough to find this
info on the web. Also, it only has one CPU slot.
RAM: I am maxed out at 4 gig.
Hard Drive: Only one (250 GB SATA 7200 RPM)
RECORDING:
I am recording using a CANON HF R10 camcorder, which offers the following
recording options:
MPEG-4 AVC/H.264
MODE:
FXP (17 Mbps) Highest Quality
XP+ (12 Mbps) High Quality
SP  ( 7 Mbps) Standard
LP  ( 5 Mbps) Long Play
FRAME RATE:
60i  (60 Hz interlaced)
PF30 (30 Hz progressive)
PF24 (24 Hz progressive)
OUTPUT FILE/FORMAT:
.mts / AVCHD
I am mainly interested in producing music videos for both burning to disc and posting to youtube. So these will be quite short -generally less than 5 minutes after the final edit - and could have quite a bit of movement, cuts and effects. I am new to recording. I am thinking that maybe I should record using either the FXP or XP+ mode and either the 60i or PF30 frame rate.
As far as souping up my computer, by the replies I have gotten, I'm thinking that adding a second HD would be my best bet.
QUESTIONS:
What size/speed HD would be recommended? Ted has mentioned access time and
internal buffering.
Is the size of my current power supply (300w) an issue when adding a HD?
Any suggestion regarding my recording mode, frame rate etc.?
Thanks a million, guys!
Owl Boy
HP Pavilion
AMD Athlon 64x2 Dual Core Processor 3800+
250 GB SATA 7200 RPM
2 GHz processor
4 Gig RAM

Similar Messages

  • Compatible graphics cards for old G5s

    I have one of the original G5 Dual Core Macs, introduced durring the summer of 2003. Does anyone know what graphics cards are compatible with this machine that are 128mb and above? Preferrably still available somehow...

    I also have one of the original Dual G5s from october 2003 and my Radeon 9600 is dying a horrible death and I am utterly disappointed that I cannot find a replacement anywhere. Especially from Apple, of all companies.
    ATI's backlog on the 9600 and 9800 are 40+ days and of course the x800 is discontinued totally.
    I can't wait possibly 6 weeks for a video card rom anywhere? ROHS ***** but!!!!!!

  • What's the best graphic card for FCP X and a Mac Pro (early) 2008?

    I have a Radeon HD 3870 in my Mac Pro, it seems that I cannot use this configuration with Final Cut Pro X. Then what's the best graphic card for FCP X usable in a Mac Pro (early) 2008?
    Thx,
    Phil

    You can get a 5770 radeon ATI MAC card
    Avoid the 5770 cards on ebay and Amazon - many are black market or manipulated cards. 
    Buy it from Apple online store or B&H photo or Macconection
    And in my case, I was able to sell my old 2600 XT card on ebay for $65 and put that money toward a 5770 card (Which was about $230 minus the $65)
    I installed the 5770 in my early Mac Pro 2 x 2.8 and it works great

  • Intel HD Graphics 4000 IS THE ONLY GRAPHICS CARD FOR MINI?

    Intel HD Graphics 4000  IS THE ONLY GRAPHICS CARD FOR MINI? OR APPLE SELLS Minis WITH A REAL GRAPHICS CARD?

    lse123 wrote:
    BOTH MINIS AND APPLE EXT OPTICAL DRIVE are dual band 110V/240V correct?
    how much size has the box of mini and the optical drive?
    Look here for what you want:
    http://www.apple.com/mac-mini/specs.html

  • What is a recommended Graphics card for G4MDD running tiger and sometimes..

    What is a recommended Graphics card for G4MDD running tiger and sometimes 9.2.2
    I really need to have both in accelerated mode, looking at my stats I currently have 9000 PRO with 64mb ram... don't need it for games but high end graphics applications currently using Starta Pro 2.5.3 on 9.2.2 which for my current purposes is afficient

    The 9600 runs like crap in OS 9.2.2 with any ATI software you can find because ATI never wrote OS 9 drivers for the 9600. OS 9 ATI software does not recognize the card. You get a basic 2D monitor output that is soft, dull, slightly off-color, and cannot be enhanced with the Monitor's Control Panel calibration utility.
    If you spend any amount of time in OS 9.2.2 or you want to use OS 9.2.2 for any of your old games (even 2-D video clip type games), don't get the 9600.
    I have a 9600 installed in my MDD G4 and now have an original Radeon for Mac PCI video card installed as well. When I want to use any of my OS 9 games, I move the DVI cable from my LCD monitor over to the old Radeon card and restart.

  • I am trying to Flash WinPc Graphics cards for my two QS Mac's

    I am hoping that someone out there can help me with flashing a couple of win pc graphics cards for use in my 2 QS's.
    I have been trying to use graphicelerator and atiacelerator from the known site, but all I get is a copy error -61, followed by Invalid Flasher! Make sure it's not locked or on a locked volume.
    Now having checked my permissions I seem to have read and write on everything, is there anything I can do to prove this.
    I have tried switching between the two machines, so I am remote logging into the other using VNC that all works ok, is there any permissions that need to be set up within the VNC as I checked the permissions on the desktop and it all seems to show read and write permissions?
    I did try it out on a working graphic card for my machine and still got the same result.
    I am now lost

    Maybe someone here can help.
    In spite of the site name, it is a Mac video card site.

  • Graphics Card for Lightroom and also CS2 and Maybe CS3

    Hi. I am still using a PC I build about 3 years ago with a ASUS P4PE mother board. It has been very good but I am wondering if it is best to now change to a later PC or, upgrade.
    I have used 1GB Ram and just got another IGB to install, but my real concern is with the Graphics Card. At present I have a Matrox Millenium G550 which as I recall has just 32MB Ram. At the time this was considered one of the best, if not the best card for 2D Images. However, I now see 256 and 512 Ram cards as norm, but they always refer to being cards for games. I never have and never will wish to play any games on a PC. So advice needed please, what is considered the best Graphics Card for Photoshop CS2 and now Lightroom?
    Incidently my Processor is just a P4 2.66 this has served me well so far, but!! I maywell get another PC but for now I feel I just want to try the best upgrades I can.
    This is my first post here and look forward to your answers and advice.
    All the best, Ron dps.

    The high-powered graphic processors being sold today are fantastic for games but offer zero improvement for digital photo editing. What you have is more than enough. Increasing your SDRAM to 2GB will help the most.
    Dave Huss

  • HT4664 What is the best graphics card for FCPX?

    In the nonstop anti-FCPX propaganda is an article of interest — posted 7/9/12 — comparing the benchmarks of FCPX and PP6.
    http://www.streamingmedia.com/Producer/Articles/ReadArticle.aspx?ArticleID=83582 &PageNum=1
    The system used was a 2 x 2.93 GHz Quad-Core Mac Pro from early 2009 running MacOS X version 10.7.4 with 12 GB of RAM and an NVIDIA Quadro FX 4800 graphics card with 1.5 GB of onboard RAM.
    In most cases PP6 outperformed FCPX with this configuration. However, in the comments Ben Balser pointed out that FCP X's A/VFoundation engine wasn't ideal on the NVIDA card:
    "Quadro is actually not the best card for FCP X's A/VFoundation engine, but great for CS6's Mercury engine, so the test is amazingly flawed right there. Try both on a 5780 card and watch things drastically change. I've done that test myself. Exporting to Compressor uses a MUCH more sophisticated encoding engine meant for higher level, professional transcoding, not simple outputs, which are faster using Export Media…"
    Apple lists this card on its support page: http://support.apple.com/kb/HT4664
    So,
    What is the best graphics card for FCPX?

    Ben,
    Thanks for chiming in on that article. It would be good to have a benchmark comparison with the two systems each with a preferred card.
    I'm hoping to see some other comparisons on this thread. Also, some links to other articles about best practices and configurations.

  • I am trying to find out the proper graphic card for mac.

    I am trying to find out the proper graphic card for imac. The graphic card which is mentioned in the web sit, that Graphic Card is not available in the open market. In open market NVIDIA GeForce GT 750M and NVIDIA GeForce GT 755M is available and this card is not mentioned in web site. So please help to select a proper suitable GPU.

    Are they supportable for After Effects ray-traced 3d renderer.
    I am confused because adobe recommended on the following graphic card.
    Mac OS
    GeForce GTX 285
    GeForce GTX 675MX
    GeForce GTX 680
    GeForce GTX 680MX
    GeForce GT 650M
    Quadro CX
    Quadro FX 4800
    Quadro 4000
    Quadro K5000

  • Looking for a Good Newer or at least better Graphics Card For M58 ThinkCentre

    I'm trying to find a graphics card for my M58 ThinkCentre. I know it needs to be low profile. but i need something that will fit into my Pc. I got one of the low profiles before and found out the fan was to big even with the case off i couldnt fit it. Can anyone help me with this? Giving me some Links or Ideas on what will be able to use for my pc? Im trying to at least get a 1 gb one so i am able to play my steam games that i have. All i need is the updated Graphics card for them. Also something in the range of $30 to $70. if not possible thats okay at least ill get a idea. Just very lost and spent many hours trying to figure it out with no luck!

    Demonthi3455 wrote:
    So this one? http://www.newegg.com/Product/Product.aspx?Item=N82E16814150711
    Unless you have a tower case this won't work. It's a full-size card.  Your original post said you needed low-profile, and this is not such a card.  I assume you have a SFF case if you wanted a low-profile card.
    That's why I suggested the low-profile Sapphire R7-250, which is single-slot, low-profile, low-power, and still GDDR5 memory with a 72GB/s bandwidth.  Also, the retail carton contains BOTH (a) full-size bracket if you want to use this low-profile card in a full-size case, and (b) low-profile bracket if you want to use this low-profile card in a SFF case.  As I mentioned, there are three digital connectors: DVI, miniDP, and microHDMI, and the retail package also includes two adapters for those smaller connectors so you can use normal full-size DP and HDMI cables to connect to your monitor 
    The earlier posted link (by Toruk-Makto) to a 250e is broken, so I don't know what that card that's describing.  But any low-profile R7-250e card I've found myself (e.g. this one from XFX) has two bad things going for it:
    (1) it's memory is DDR3 instead of DDR5, which right away sets its bandwidth to about 1/3 that of the Sapphire R7-250. You want DDR5 memory if you can get it.
    (2) it doesn't indicate that it comes with a low-profile bracket as well as a full-size bracket (as the Sapphire R7-250 does), so even though the card itself appears low-profile in size you won't be able to install it in a SFF case unless you have a low-profile bracket (as the Sapphire R7-250 does). Maybe it's just the writeup for the R7-250e which overlooked the second low-profile bracket also included, but the picture shown is with a full-size bracket.
    Note: the full-size bracket on the XFX R7-250e supports full-size DP and full-size HDMI as well as DVI.  The low-profile bracket on the Sapphire R7-250 supports mini-DP, micro-HDMI and DVI.  The retail carton also includes two adapter cables so that you can connect full-size DP and full-size HDMI cables, connecting them to the adapters.  Personally I would buy a separate straight-through cable with the proper desired connector at both ends, as I don't like adapters.  So for example I use a miniDP->DVI cable (from Monoprice) in one of my machines that has this card and two monitors, to connect to a second monitor which only has DVI, as I was already using the DVI connector on the card to go to my first monitor which also only has DVI.

  • Help me choose a good Graphic Card for my Laptop

    Hello guys, first let me say I'm glad I've found this forum, It's been some time that I wanted to decide and buy a new graphic card for my laptop, but I guess this is the time and I'll start by asking for some help from you.
    My laptop is HP Pavilion g6, the specs are the following (using CPU-z)
    CPU: http://prntscr.com/5fqo9f
    Caches: http://prntscr.com/5fqohx
    Mainboard: http://prntscr.com/5fqomk
    RAM: http://prntscr.com/5fqos4
    SPD: http://prntscr.com/5fqoxh
    Graphics: http://prntscr.com/5fqp1b
    I wanted to ask you what kind of graphic card would suit my laptop, and which one do you recommend me buy?
    I would to play all the latest games... I believe I need another 4GB of RAM memory, and I believe my CPU is good enough, what do you say guys?
    Thank you!
    This question was solved.
    View Solution.

    Hi,
    What is the model/product of your laptop ? Generally speaking: we can't upgrade video card for nearly all laptops.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Is nVidia Geforce GT640 good graphics card for PrE10 despite low memory bandwidth?

    Can anybody confirm that the nVidia Geforce GT640 is a reasonable graphics card for Premiere Elements 10 and Photoshop Elements 10?
    The person who assembled my Core i7 3770K desktop with 16Gb of RAM at 1600mHz installed the nVidia GT640 card with 2Gb of DDR3 memory. He said that this was a good (fairly low cost) card for video editing because it has 384 CUDA cores - very helpful in video editing. I am pretty ignorant about graphics cards, but like the low power usage, 65 watts, and reputed cool operating temperatures. I have since read that DDR5 memory would have been much faster because of greater memory bandwidth - say 80-90Gb per second compared with 28.5Gb per second for the DDR3 memory on the GT640 card. I was after economical power use. DDR5 cards use 110 watts upwards and run much hotter than DDR 3 cards, all other things being equal. The really fast cards require special power units and cooling.
    Does anybody know whether limited memory bandwidth is important in video editing? Is speed much more critical in gaming than in video editing? Are other attributes such as 384 CUDA cores, nvenc syncing, dedicated encodment, 28nm Kepler architecture, 2Gb memory frame buffer, 1.3 billion transistors, plenty of texture units -  more important than memory bandwidth in video editing? Does bandwidth limited by DDR3 memory affect quality of image?
    I read that the GT640 would be much faster (producing better image quality?) than the HD4000 integrated Intel graphics of the Core i7 Ivy Bridge processor. Is this so?
    Windows 7 Home Premium 64 bit and all programs are installed on a 120Gb OCZ Agility 3 solid state drive. My data drive is a 1Tb Seagate SATA 3 at 7200 RPM. I have a beautiful 21 inch ASUS vs228n LED monitor and LG blu-ray burner.
    I did lots of editing with PrE 3 with a Dell 3.06 gHz hyperthreading desktop and Win XP. The output and even the preview monitoring was clear and stable. I am still capturing standard definition mini dv tape by firewire from a 3MOS Panasonic handycam, but plan to upgrade to HD 3MOS with flash memory. I make the preview monitor really small - about 7cm wide - in PR10, because the quality of the preview picture is much poorer than the quality that I experienced with the Premiere Elements 3 program with Win XP. Is this just an indication of memory-saving in PrE 10 previews? I expect output to be much superior, although still mpeg2-DVD quality until I upgrade my camera. I have set rendering on maximum bitrate.
    Anyway, despite these reservations with preview quality, the GT640 seems to be performing fine. Picture quality in Photoshop, online and elsewhere on my computer is excellent.
    I updated the nVidia display driver only yesterday to version 306.23.
    Nearly all graphics cards forums are about gaming. I hope to see more forums about graphics in editing here.
    What do you think of the 2Gb nVidia GT640 for editing with PrE 10 and Photoshop Elements 10? What would you say about picture quality in the PrE 10 monitor versus quality of output? Was picture quality in the PrE 3 monitor sharper and more stable, as I imagine?
    Regards, Phil

    Sheltie,
    Thank you for the kind words. We all work very hard to help others with video-editing. Some of us also show up on other Adobe forums, depending on the products that we use most often.
    Besides helping out, I also find that I learn something new every day, even about programs that I have used for decades. Heck, I just learned something new about PrE vs PrPro (my main NLE program), when I went to try and help a user. I probably actually use PrE more to test my theories, or to replicate a user's problem, than I do to actually edit my videos. Still, when applicable, I do real work in the program.
    With about a dozen "regulars" here, if one of us is not around, several more usually are. Personally, I do not understand how Steve Grisetti and John T. can dedicate so very much time here. Steve is a noted author of books on PrE, PSE, Sony DVD Architect, and others, plus helps run a video/photography Web site, Muvipix.com, that is very active, and has so very much to offer. John T. is always under the watchful eye of The JobJarQueen, and gets dragged, kicking and screaming, out into the yard, or up on his roof, so can be gone for a bit.
    Neale usually beats us all, since he's in the UK, and normally answers all the questions, that come in too late for us to see. He is also a PrE power-user, so beats me hands down.
    I travel a great deal, but no one ever misses me. Was supposed to do a trip to Sydney last Dec., but had to cancel. Have not gotten details on the reschedule of that trip, but it would have been my first jaunt south of the Equator. Gotta' make that happen.
    Good luck, and happy editing,
    Hunt

  • Passive graphics card for 2-monitor setup

    I am looking for a graphics card for use with 2 monitors in a dual monitor configuration that has:
    Passive cooling
    1 x DVI port
    1 x DisplayPort
    I'm aware that CS6 can  make use of some of the more advanced graphics card features, such as Open CL, but I don't understand the technicalities of this, nor what this implies when choosing a card.  I will not be doing any video-editing, video playback or gaming. 
    My questions are:
    Would a card such as the Sapphire Radeon HD 6670 Ultimate provide full support for CS6, without being overkill? (http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=1088&pid=1240&psn=&lid= 1&leg=0)  -  I thought that the "low active power consumption and Dynamic Power Management" features seem a good idea, since the card will never be used very intensively.
    Or would the much cheaper Zotac Synergy Edition GeForce GT 210 be just as good for my needs. (http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=1088&pid=1240&psn=&lid= 1&leg=0)
    Or are there other types of cards that would be more appropriate?
    And finally, can you connect a single-link DVI device to a dual-link DVI port?  (If so, I would like the DVI port to be dual-link, for future compatibility.  If not, it will need to  be single-link, for my current hardware.)

    For the benefit of anyone searching on this topic in the future, a posting of this question on Silent PC Review (http://www.silentpcreview.com/forums/viewtopic.php?f=19&t=65413) yielded some extremely helpful responses.

  • Graphics Card for Xserv G5

    Please help!
    Apple can't.....
    We have a G5 Xserv, that we desparately need a Graphics Card for. Apple say they can't supply it (their most useful suggestion was to buy one of the new core-duo machines as they ship with a graphics card as standard!).
    Xserv G5
    2GHz PowerPC G5
    2GB DDR400 ECC SDRAM - 2x1GB
    1000GB ADM (2x500GB Serial ATA)
    I believe we need a PCI-X card?
    Any ideas where I can get one or what the alternatives are? It can be a very basic card - nothing hardcore required in terms of graphics performance. If it could only draw the desktop in black and white, it would do!
    Thoughts?
    Xserv G5/2Ghz G5   Mac OS X (10.4.8)  

    The Radeon 7000 PCI card is based on the same GPU that Apple once shipped as the BTO Xserve video option - ATI RV100 - so it is worth a try.
    http://developer.apple.com/documentation/Hardware/DeveloperNotes/Servers/XserveG5/2Architecture/chapter_3_section7.html
    Any basic ATI should be supported by the OS because ATI was Apple's default video provider for much of this time period.
    Note that using a PCI video card will limit the speed of any PCI-X cards you also have installed, but that shouldn't effect your actual performance probably.
    =Tod
    G5/2.0x2, Dual XServes x2, XRAID, beige G3 501Mhz    

  • Accelarate the Linux ATI Graphics card  for java Swing application

    Hi All,
    I am using a ATI Radeon 9550 Graphic card in LFS (Linux from the scratch) environment. I want to enable the OpenGL-based pipeline for Java Swing application. I tried the -Dsun.java2d.opengl=true . But the Java swing application getting very slow.
    How to overcome this problem?
    Any one give the procedure to Accelerate ATI graphics card for Java Swing Application
    How to verify Java swing use ATI graphics card ?
    Thanks in advance..
    Prabhu.S

    Hi All,
    I am using a ATI Radeon 9550 Graphic card in LFS (Linux from the scratch) environment. I want to enable the OpenGL-based pipeline for Java Swing application. I tried the -Dsun.java2d.opengl=true . But the Java swing application getting very slow.
    How to overcome this problem?
    Any one give the procedure to Accelerate ATI graphics card for Java Swing Application
    How to verify Java swing use ATI graphics card ?
    Thanks in advance..
    Prabhu.S

Maybe you are looking for

  • Reinstalling windows 7 on bootcamp

    I just got a new iMac (late 2013) 27" with Fusion drive, running Mavericks. I successfully installed Windows 7 via Bootcamp Assistant and everything is running fine. (I haven't activated it yet because I'll be setting up Parallels in the next few day

  • I am unable to view e-mail attachments from a when logging on through a website

    I am not view or retrieve e-mail attachments from a web based e-mail account. I can log into my account and view e-mails but the attachments are not showing up. This problem only recently appeared previously I was able to view and read attachments. I

  • CPU usage for Image acquiring by using Imaq1411

    Hello, Running the IMAQ program makes the CPU usage almost 100%. I tested it out with my own program and the example program you provided. So far I haven't have any clue about this. I've tried to set the ROI as the help said (Left, Top, Right, Bottom

  • No vertical scroll in div

    On the website I am doing I have 2 div's which should scroll ALWAYS untill the bottom and ONLY vertically. I did overflow: scroll; height: 100%; In Firefox/Mac it does no horizontal scroll, but in IE/PC it does !? Also , on both the scroll goes furth

  • Java Runtime parameters- setting trace/log levels and enabling by default

    Hi, I have a user reporting that a Java app that I support is unexpectedly quitting, and our developers are having trouble tracking down exactly what's causing the problem. I'm trying to enable the maximum possible logging/tracing for this user, but