Graphics Card not detected.

I bought my laptop two days back. Its the new HP Pavillion dv6 laptop. I have a 2gb AMD Radeon 6770m graphics card installed. But my games do not detect it. Even when i right click on the catalyst center icon on the taskbar i have a tab called Mobile Intel(R) HD Graphics where i can change the setting for intel HD Graphics which come with the new intel cores. No where in the computer was i able to change the active graphics card.

You have to set the game to high performance in the ccc
for start the 6770 will not run opengl games or apps on any dv6 or dv7 61xx
look at this thread
http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/New-dv7-tqe-6100-CTO-Will-Not-Switch-to-ATI-...
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

ATI Graphics card not detected on cold boot, works on warm boot

Hi All,
I hope you can help me out with this.
I'm using Radeon HD7850 with ATI-Catalyst.
The issue is, if I do a cold boot (physically turn off the power, turn back on) the system won't boot into X, only tty.
At this point, a reboot works fine.
Or if I don't turn off the power, just shutdown and reboot (warm boot), it works ok.
Here's the Xorg log on cold boot:
[ 2.226]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 2.226] X Protocol Version 11, Revision 0
[ 2.226] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 2.226] Current Operating System: Linux dmanPC 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 09:14:51 CEST 2012 x86_64
[ 2.226] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=3766a71b-dbfe-4cc2-b7bd-948878b5da67 ro nomodeset quiet
[ 2.226] Build Date: 27 August 2012 08:04:39AM
[ 2.226]
[ 2.226] Current version of pixman: 0.26.2
[ 2.226] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2.226] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2.226] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 28 05:57:41 2012
[ 2.227] (==) Using config file: "/etc/X11/xorg.conf"
[ 2.228] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2.228] (==) ServerLayout "aticonfig Layout"
[ 2.228] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 2.228] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 2.229] (**) | |-->Device "aticonfig-Device[0]-0"
[ 2.229] (==) Automatically adding devices
[ 2.229] (==) Automatically enabling devices
[ 2.231] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2.231] Entry deleted from font path.
[ 2.231] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2.231] Entry deleted from font path.
[ 2.231] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2.231] Entry deleted from font path.
[ 2.231] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2.232] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2.232] Entry deleted from font path.
[ 2.232] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2.232] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 2.232] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2.232] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2.232] (II) Loader magic: 0x7c8b00
[ 2.232] (II) Module ABI versions:
[ 2.232] X.Org ANSI C Emulation: 0.4
[ 2.232] X.Org Video Driver: 12.1
[ 2.232] X.Org XInput driver : 16.0
[ 2.232] X.Org Server Extension : 6.0
[ 2.232] (--) PCI:*(0:7:0:0) 1002:6819:1462:2730 rev 0, Mem @ 0xe0000000/268435456, 0xf7b00000/262144, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
[ 2.232] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2.232] (II) "extmod" will be loaded by default.
[ 2.232] (II) "dbe" will be loaded by default.
[ 2.232] (II) "glx" will be loaded by default.
[ 2.232] (II) "record" will be loaded by default.
[ 2.232] (II) "dri" will be loaded by default.
[ 2.232] (II) "dri2" will be loaded by default.
[ 2.232] (II) LoadModule: "extmod"
[ 2.233] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2.233] (II) Module extmod: vendor="X.Org Foundation"
[ 2.233] compiled for 1.12.4, module version = 1.0.0
[ 2.233] Module class: X.Org Server Extension
[ 2.233] ABI class: X.Org Server Extension, version 6.0
[ 2.233] (II) Loading extension MIT-SCREEN-SAVER
[ 2.233] (II) Loading extension XFree86-VidModeExtension
[ 2.233] (II) Loading extension XFree86-DGA
[ 2.233] (II) Loading extension DPMS
[ 2.233] (II) Loading extension XVideo
[ 2.233] (II) Loading extension XVideo-MotionCompensation
[ 2.233] (II) Loading extension X-Resource
[ 2.233] (II) LoadModule: "dbe"
[ 2.233] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2.234] (II) Module dbe: vendor="X.Org Foundation"
[ 2.234] compiled for 1.12.4, module version = 1.0.0
[ 2.234] Module class: X.Org Server Extension
[ 2.234] ABI class: X.Org Server Extension, version 6.0
[ 2.234] (II) Loading extension DOUBLE-BUFFER
[ 2.234] (II) LoadModule: "glx"
[ 2.234] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2.236] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 2.236] compiled for 6.9.0, module version = 1.0.0
[ 2.236] (II) Loading extension GLX
[ 2.236] (II) LoadModule: "record"
[ 2.236] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2.237] (II) Module record: vendor="X.Org Foundation"
[ 2.237] compiled for 1.12.4, module version = 1.13.0
[ 2.237] Module class: X.Org Server Extension
[ 2.237] ABI class: X.Org Server Extension, version 6.0
[ 2.237] (II) Loading extension RECORD
[ 2.237] (II) LoadModule: "dri"
[ 2.237] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2.237] (II) Module dri: vendor="X.Org Foundation"
[ 2.237] compiled for 1.12.4, module version = 1.0.0
[ 2.237] ABI class: X.Org Server Extension, version 6.0
[ 2.237] (II) Loading extension XFree86-DRI
[ 2.237] (II) LoadModule: "dri2"
[ 2.238] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2.238] (II) Module dri2: vendor="X.Org Foundation"
[ 2.238] compiled for 1.12.4, module version = 1.2.0
[ 2.238] ABI class: X.Org Server Extension, version 6.0
[ 2.238] (II) Loading extension DRI2
[ 2.238] (II) LoadModule: "fglrx"
[ 2.238] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 2.262] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 2.262] compiled for 1.4.99.906, module version = 8.98.2
[ 2.262] Module class: X.Org Video Driver
[ 2.262] (II) Loading sub module "fglrxdrm"
[ 2.262] (II) LoadModule: "fglrxdrm"
[ 2.262] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2.263] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2.263] compiled for 1.4.99.906, module version = 8.98.2
[ 2.263] (II) AMD Proprietary Linux Driver Version Identifier:8.98.2
[ 2.263] (II) AMD Proprietary Linux Driver Release Identifier: 8.982
[ 2.263] (II) AMD Proprietary Linux Driver Build Date: Jul 27 2012 20:37:56
[ 2.263] (++) using VT number 8
[ 2.264] (WW) Falling back to old probe method for fglrx
[ 2.269] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 2.271] (WW) fglrx: No matching Device section for instance (BusID ) found
[ 2.271] (EE) No devices detected.
[ 2.271]
Fatal server error:
[ 2.271] no screens found
[ 2.271]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2.271] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2.271]
Here's the same log for warm boot:
[ 2.289] (++) using VT number 8
[ 2.290] (WW) Falling back to old probe method for fglrx
[ 2.295] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 2.296] (--) Chipset Supported AMD Graphics Processor (0x6819) found
[ 2.296] (WW) fglrx: No matching Device section for instance (BusID PCI:0@6:0:1) found
[ 2.297] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 2.297] (II) AMD Video driver is signed
[ 2.297] (II) fglrx(0): pEnt->device->identifier=0x82b7a0
[ 2.297] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[ 2.297] (II) Loading sub module "vgahw"
[ 2.297] (II) LoadModule: "vgahw"
[ 2.298] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 2.298] (II) Module vgahw: vendor="X.Org Foundation"
[ 2.298] compiled for 1.12.4, module version = 0.1.0
[ 2.298] ABI class: X.Org Video Driver, version 12.1
[ 2.298] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 2.298] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2.298] (==) fglrx(0): Default visual is TrueColor
[ 2.298] (**) fglrx(0): Option "OpenGLOverlay" "0"
[ 2.298] (**) fglrx(0): Option "DPMS" "true"
[ 2.298] (==) fglrx(0): RGB weight 888
[ 2.298] (II) fglrx(0): Using 8 bits per RGB
[ 2.298] (==) fglrx(0): Buffer Tiling is ON
[ 2.299] (II) Loading sub module "fglrxdrm"
[ 2.299] (II) LoadModule: "fglrxdrm"
[ 2.299] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 2.299] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 2.299] compiled for 1.4.99.906, module version = 8.98.2
[ 2.299] ukiDynamicMajor: found major device number 251
[ 2.299] ukiDynamicMajor: found major device number 251
[ 2.299] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[ 2.299] ukiOpenDevice: node name is /dev/ati/card0
[ 2.299] ukiOpenDevice: open result is 11, (OK)
[ 2.299] ukiOpenByBusid: ukiOpenMinor returns 11
[ 2.299] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[ 2.299] (**) fglrx(0): NoAccel = NO
[ 2.299] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 2.299] (--) fglrx(0): Chipset: "AMD Radeon HD 7800 Series " (Chipset = 0x6819)
[ 2.299] (--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x2730)
[ 2.299] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 2.299] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 2.299] (--) fglrx(0): MMIO registers at 0xf7c00000
[ 2.299] (--) fglrx(0): I/O port at 0x0000c000
[ 2.299] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 2.300] (II) fglrx(0): AC Adapter is used
[ 2.303] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 2.303] (II) Loading sub module "vbe"
[ 2.303] (II) LoadModule: "vbe"
[ 2.303] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 2.304] (II) Module vbe: vendor="X.Org Foundation"
[ 2.304] compiled for 1.12.4, module version = 1.1.0
[ 2.304] ABI class: X.Org Video Driver, version 12.1
[ 2.304] (II) fglrx(0): VESA BIOS detected
[ 2.304] (II) fglrx(0): VESA VBE Version 3.0
[ 2.304] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 2.304] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 2.304] (II) fglrx(0): VESA VBE OEM Software Rev: 15.17
[ 2.304] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 2.304] (II) fglrx(0): VESA VBE OEM Product: PITCAIRN
[ 2.304] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 2.309] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 2.309] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[ 2.309] (II) fglrx(0): PCIE card detected
[ 2.309] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 2.309] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 2.311] (II) fglrx(0): Using adapter: 6:0.0.
[ 2.320] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 2.458] (II) fglrx(0): Interrupt handler installed at IRQ 48.
[ 2.458] (II) fglrx(0): RandR 1.2 support is enabled!
[ 2.458] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 2.458] (==) fglrx(0): Center Mode is disabled
[ 2.458] (II) Loading sub module "fb"
[ 2.458] (II) LoadModule: "fb"
[ 2.458] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2.461] (II) Module fb: vendor="X.Org Foundation"
[ 2.461] compiled for 1.12.4, module version = 1.0.0
[ 2.461] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2.461] (II) Loading sub module "ddc"
[ 2.461] (II) LoadModule: "ddc"
[ 2.461] (II) Module "ddc" already built-in
[ 2.571] (II) fglrx(0): Finished Initialize PPLIB!
[ 2.577] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 2.577] (II) fglrx(0): Output DFP2 has no monitor section
[ 2.577] (II) fglrx(0): Output DFP3 has no monitor section
[ 2.577] (II) fglrx(0): Output DFP4 has no monitor section
[ 2.577] (II) fglrx(0): Output DFP5 has no monitor section
[ 2.577] (II) fglrx(0): Output DFP6 has no monitor section
[ 2.577] (II) fglrx(0): Output DFP7 has no monitor section
[ 2.577] (II) fglrx(0): Output DFP8 has no monitor section
[ 2.577] (II) fglrx(0): Output DFP9 has no monitor section
[ 2.577] (II) fglrx(0): Output DFP10 has no monitor section
[ 2.577] (II) fglrx(0): Output CRT1 has no monitor section
[ 2.578] (II) Loading sub module "ddc"
[ 2.578] (II) LoadModule: "ddc"
[ 2.578] (II) Module "ddc" already built-in
[ 2.578] (II) fglrx(0): Connected Display0: DFP10
[ 2.578] (II) fglrx(0): Display0 EDID data ---------------------------
[ 2.578] (II) fglrx(0): Manufacturer: SAM Model: 524 Serial#: 1280455218
[ 2.578] (II) fglrx(0): Year: 2009 Week: 20
[ 2.578] (II) fglrx(0): EDID Version: 1.3
[ 2.578] (II) fglrx(0): Digital Display Input
[ 2.578] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 2.578] (II) fglrx(0): Gamma: 2.20
[ 2.578] (II) fglrx(0): DPMS capabilities: Off
[ 2.578] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2.578] (II) fglrx(0): First detailed timing is preferred mode
[ 2.578] (II) fglrx(0): redX: 0.648 redY: 0.339 greenX: 0.143 greenY: 0.070
[ 2.578] (II) fglrx(0): blueX: 0.282 blueY: 0.603 whiteX: 0.312 whiteY: 0.329
[ 2.578] (II) fglrx(0): Supported established timings:
[ 2.578] (II) fglrx(0): 640x480@60Hz
[ 2.578] (II) fglrx(0): 800x600@56Hz
[ 2.578] (II) fglrx(0): 800x600@60Hz
[ 2.578] (II) fglrx(0): 1024x768@60Hz
[ 2.578] (II) fglrx(0): Manufacturer's mask: 0
[ 2.578] (II) fglrx(0): Supported standard timings:
[ 2.578] (II) fglrx(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 2.578] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 2.578] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2.578] (II) fglrx(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 2.578] (II) fglrx(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 2.578] (II) fglrx(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 2.578] (II) fglrx(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 2.578] (II) fglrx(0): Monitor name: SyncMaster
[ 2.578] (II) fglrx(0): Serial No: HMBS500385
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 74.2 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 74.2 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 27.0 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 27.0 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 2.578] (II) fglrx(0): Number of EDID sections to follow: 1
[ 2.578] (II) fglrx(0): EDID (in hex):
[ 2.578] (II) fglrx(0): 00ffffffffffff004c2d24053232524c
[ 2.578] (II) fglrx(0): 1413010380301b782a3851a656241248
[ 2.578] (II) fglrx(0): 9a50542308008100814081809500a940
[ 2.578] (II) fglrx(0): b30001010101023a801871382d40582c
[ 2.578] (II) fglrx(0): 4500dd0c1100001e000000fd00383c1e
[ 2.578] (II) fglrx(0): 5111000a202020202020000000fc0053
[ 2.578] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 2.578] (II) fglrx(0): 00484d42533530303338350a20200168
[ 2.578] (II) fglrx(0): End of Display0 EDID data --------------------
[ 2.578] (II) fglrx(0): EDID for output DFP1
[ 2.578] (II) fglrx(0): EDID for output DFP2
[ 2.578] (II) fglrx(0): EDID for output DFP3
[ 2.578] (II) fglrx(0): EDID for output DFP4
[ 2.578] (II) fglrx(0): EDID for output DFP5
[ 2.578] (II) fglrx(0): EDID for output DFP6
[ 2.578] (II) fglrx(0): EDID for output DFP7
[ 2.578] (II) fglrx(0): EDID for output DFP8
[ 2.578] (II) fglrx(0): EDID for output DFP9
[ 2.578] (II) fglrx(0): EDID for output DFP10
[ 2.578] (II) fglrx(0): Manufacturer: SAM Model: 524 Serial#: 1280455218
[ 2.578] (II) fglrx(0): Year: 2009 Week: 20
[ 2.578] (II) fglrx(0): EDID Version: 1.3
[ 2.578] (II) fglrx(0): Digital Display Input
[ 2.578] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 2.578] (II) fglrx(0): Gamma: 2.20
[ 2.578] (II) fglrx(0): DPMS capabilities: Off
[ 2.578] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2.578] (II) fglrx(0): First detailed timing is preferred mode
[ 2.578] (II) fglrx(0): redX: 0.648 redY: 0.339 greenX: 0.143 greenY: 0.070
[ 2.578] (II) fglrx(0): blueX: 0.282 blueY: 0.603 whiteX: 0.312 whiteY: 0.329
[ 2.578] (II) fglrx(0): Supported established timings:
[ 2.578] (II) fglrx(0): 640x480@60Hz
[ 2.578] (II) fglrx(0): 800x600@56Hz
[ 2.578] (II) fglrx(0): 800x600@60Hz
[ 2.578] (II) fglrx(0): 1024x768@60Hz
[ 2.578] (II) fglrx(0): Manufacturer's mask: 0
[ 2.578] (II) fglrx(0): Supported standard timings:
[ 2.578] (II) fglrx(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 2.578] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 2.578] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2.578] (II) fglrx(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 2.578] (II) fglrx(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 2.578] (II) fglrx(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 2.578] (II) fglrx(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 2.578] (II) fglrx(0): Monitor name: SyncMaster
[ 2.578] (II) fglrx(0): Serial No: HMBS500385
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 74.2 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 74.2 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 27.0 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 2.578] (II) fglrx(0): Supported detailed timing:
[ 2.578] (II) fglrx(0): clock: 27.0 MHz Image Size: 477 x 268 mm
[ 2.578] (II) fglrx(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 2.578] (II) fglrx(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 2.578] (II) fglrx(0): Number of EDID sections to follow: 1
[ 2.578] (II) fglrx(0): EDID (in hex):
[ 2.578] (II) fglrx(0): 00ffffffffffff004c2d24053232524c
[ 2.578] (II) fglrx(0): 1413010380301b782a3851a656241248
[ 2.578] (II) fglrx(0): 9a50542308008100814081809500a940
[ 2.578] (II) fglrx(0): b30001010101023a801871382d40582c
[ 2.578] (II) fglrx(0): 4500dd0c1100001e000000fd00383c1e
[ 2.578] (II) fglrx(0): 5111000a202020202020000000fc0053
[ 2.578] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 2.578] (II) fglrx(0): 00484d42533530303338350a20200168
[ 2.579] (II) fglrx(0): Printing probed modes for output DFP10
[ 2.579] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 2.579] (II) fglrx(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 2.579] (II) fglrx(0): Modeline "1776x1000"x50.0 148.50 1776 2304 2348 2640 1000 1004 1009 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1680x1050"x50.0 148.50 1680 2448 2492 2640 1050 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 2.579] (II) fglrx(0): Modeline "1400x1050"x60.0 162.00 1400 1664 1856 2160 1050 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 2.579] (II) fglrx(0): Modeline "1400x1050"x50.0 148.50 1400 2448 2492 2640 1050 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1600x900"x60.0 162.00 1600 1664 1856 2160 900 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 2.579] (II) fglrx(0): Modeline "1600x900"x50.0 148.50 1600 2448 2492 2640 900 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1280x1024"x50.0 148.50 1280 2448 2492 2640 1024 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 2.579] (II) fglrx(0): Modeline "1440x900"x50.0 148.50 1440 2448 2492 2640 900 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 2.579] (II) fglrx(0): Modeline "1280x960"x50.0 148.50 1280 2448 2492 2640 960 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 2.579] (II) fglrx(0): Modeline "1280x800"x50.0 148.50 1280 2448 2492 2640 800 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1280x800"x60.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 2.579] (II) fglrx(0): Modeline "1280x768"x50.0 148.50 1280 2448 2492 2640 768 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1280x768"x60.0 83.50 1280 1352 1480 1680 768 803 809 831 -hsync +vsync (49.7 kHz)
[ 2.579] (II) fglrx(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
[ 2.579] (II) fglrx(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
[ 2.579] (II) fglrx(0): Modeline "1024x768"x50.0 148.50 1024 2448 2492 2640 768 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 2.579] (II) fglrx(0): Modeline "1152x648"x50.0 74.25 1152 1592 1632 1980 648 653 658 750 +hsync +vsync (37.5 kHz)
[ 2.579] (II) fglrx(0): Modeline "800x600"x50.0 148.50 800 2448 2492 2640 600 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 2.579] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "720x576"x60.0 148.50 720 2008 2052 2200 576 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 2.579] (II) fglrx(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "720x480"x50.0 148.50 720 2448 2492 2640 480 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 2.579] (II) fglrx(0): Modeline "640x480"x50.0 148.50 640 2448 2492 2640 480 1084 1089 1125 +hsync +vsync (56.2 kHz)
[ 2.579] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 2.579] (II) fglrx(0): EDID for output CRT1
[ 2.579] (II) fglrx(0): Output DFP1 disconnected
[ 2.579] (II) fglrx(0): Output DFP2 disconnected
[ 2.579] (II) fglrx(0): Output DFP3 disconnected
[ 2.579] (II) fglrx(0): Output DFP4 disconnected
[ 2.579] (II) fglrx(0): Output DFP5 disconnected
[ 2.579] (II) fglrx(0): Output DFP6 disconnected
[ 2.579] (II) fglrx(0): Output DFP7 disconnected
[ 2.579] (II) fglrx(0): Output DFP8 disconnected
[ 2.579] (II) fglrx(0): Output DFP9 disconnected
[ 2.579] (II) fglrx(0): Output DFP10 connected
[ 2.579] (II) fglrx(0): Output CRT1 disconnected
[ 2.579] (II) fglrx(0): Using exact sizes for initial modes
[ 2.579] (II) fglrx(0): Output DFP10 using initial mode 1920x1080
[ 2.579] (II) fglrx(0): DPI set to (96, 96)
[ 2.579] (II) fglrx(0): Eyefinity capable adapter detected.
[ 2.579] (II) fglrx(0): Adapter AMD Radeon HD 7800 Series has 6 configurable heads and 1 displays connected.
[ 2.579] (==) fglrx(0): PseudoColor visuals disabled
[ 2.579] (II) Loading sub module "ramdac"
[ 2.579] (II) LoadModule: "ramdac"
[ 2.579] (II) Module "ramdac" already built-in
[ 2.579] (==) fglrx(0): NoDRI = NO
[ 2.579] (==) fglrx(0): Capabilities: 0x00000000
[ 2.579] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 2.579] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 2.579] (==) fglrx(0): UseFastTLS=0
[ 2.579] (II) fglrx(0): Desktop Vsync is enabled.
[ 2.579] (--) Depth 24 pixmap format is 32 bpp
[ 2.579] (II) Loading extension ATIFGLRXDRI
[ 2.579] (II) fglrx(0): doing swlDriScreenInit
[ 2.579] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 2.579] ukiDynamicMajor: found major device number 251
[ 2.579] ukiDynamicMajor: found major device number 251
[ 2.579] ukiDynamicMajor: found major device number 251
[ 2.579] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[ 2.579] ukiOpenDevice: node name is /dev/ati/card0
[ 2.579] ukiOpenDevice: open result is 12, (OK)
[ 2.579] ukiOpenByBusid: ukiOpenMinor returns 12
[ 2.579] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[ 2.579] (II) fglrx(0): [uki] DRM interface version 1.0
[ 2.579] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:6:0:0"
[ 2.579] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 2.579] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f1426d74000
[ 2.579] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 2.579] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 2.579] (II) fglrx(0): swlDriScreenInit done
[ 2.579] (II) fglrx(0): Kernel Module Version Information:
[ 2.579] (II) fglrx(0): Name: fglrx
[ 2.579] (II) fglrx(0): Version: 8.98.2
[ 2.579] (II) fglrx(0): Date: Jul 27 2012
[ 2.579] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 2.579] (II) fglrx(0): Kernel Module version matches driver.
[ 2.579] (II) fglrx(0): Kernel Module Build Time Information:
[ 2.579] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.5.3-1-ARCH
[ 2.579] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 2.579] (II) fglrx(0): Build-Kernel __SMP__: no
[ 2.579] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 2.579] (II) fglrx(0): [uki] register handle = 0x00004000
[ 2.589] (II) fglrx(0): DRI initialization successfull
[ 2.590] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x010e0000
[ 2.591] (==) fglrx(0): Backing store disabled
[ 2.591] (II) Loading extension FGLRXEXTENSION
[ 2.591] (**) fglrx(0): DPMS enabled
[ 2.591] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 2.591] (**) fglrx(0): Textured Video is enabled.
[ 2.591] (II) LoadModule: "glesx"
[ 2.591] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 2.601] (II) Module glesx: vendor="X.Org Foundation"
[ 2.601] compiled for 1.4.99.906, module version = 1.0.0
[ 2.601] (II) Loading extension GLESX
[ 2.601] (II) fglrx(0): GLESX enableFlags = 592
[ 2.602] (II) fglrx(0): GLESX is enabled
[ 2.602] (II) LoadModule: "amdxmm"
[ 2.602] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 2.603] (II) Module amdxmm: vendor="X.Org Foundation"
[ 2.603] compiled for 1.4.99.906, module version = 2.0.0
[ 2.615] (II) Loading extension AMDXVOPL
[ 2.615] (II) Loading extension AMDXVBA
[ 2.617] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 2.618] (II) fglrx(0): Enable composite support successfully
[ 2.618] (WW) fglrx(0): Option "VendorName" is not used
[ 2.618] (WW) fglrx(0): Option "ModelName" is not used
[ 2.618] (II) fglrx(0): X context handle = 0x1
[ 2.618] (II) fglrx(0): [DRI] installation complete
[ 2.618] (==) fglrx(0): Silken mouse enabled
[ 2.618] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 2.618] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 2.735] (II) fglrx(0): Framebuffer compression enabled: mcAddr=0xf407a40000 width=0xa00 height=0x3267
[ 2.735] (--) RandR disabled
[ 2.735] (II) Initializing built-in extension Generic Event Extension
[ 2.735] (II) Initializing built-in extension SHAPE
[ 2.735] (II) Initializing built-in extension MIT-SHM
[ 2.735] (II) Initializing built-in extension XInputExtension
[ 2.735] (II) Initializing built-in extension XTEST
[ 2.735] (II) Initializing built-in extension BIG-REQUESTS
[ 2.735] (II) Initializing built-in extension SYNC
[ 2.735] (II) Initializing built-in extension XKEYBOARD
[ 2.735] (II) Initializing built-in extension XC-MISC
[ 2.735] (II) Initializing built-in extension SECURITY
[ 2.735] (II) Initializing built-in extension XINERAMA
[ 2.735] (II) Initializing built-in extension XFIXES
[ 2.735] (II) Initializing built-in extension RENDER
[ 2.735] (II) Initializing built-in extension RANDR
[ 2.735] (II) Initializing built-in extension COMPOSITE
[ 2.735] (II) Initializing built-in extension DAMAGE
[ 2.736] ukiDynamicMajor: found major device number 251
[ 2.736] ukiDynamicMajor: found major device number 251
[ 2.736] ukiOpenByBusid: Searching for BusID PCI:6:0:0
[ 2.736] ukiOpenDevice: node name is /dev/ati/card0
[ 2.736] ukiOpenDevice: open result is 13, (OK)
[ 2.736] ukiOpenByBusid: ukiOpenMinor returns 13
[ 2.736] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
[ 2.842] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 2.857] (II) fglrx(0): Enable the clock gating!
[ 2.872] (II) fglrx(0): Desktop Vsync is enabled.
[ 2.872] (II) fglrx(0): Setting screen physical size to 508 x 285
[ 2.901] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2.901] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2.901] (II) LoadModule: "evdev"
[ 2.901] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2.902] (II) Module evdev: vendor="X.Org Foundation"
[ 2.902] compiled for 1.12.3.901, module version = 2.7.3
[ 2.902] Module class: X.Org XInput Driver
[ 2.902] ABI class: X.Org XInput driver, version 16.0
[ 2.902] (II) Using input driver 'evdev' for 'Power Button'
[ 2.902] (**) Power Button: always reports core events
[ 2.902] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2.902] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2.902] (--) evdev: Power Button: Found keys
[ 2.902] (II) evdev: Power Button: Configuring as keyboard
[ 2.902] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 2.902] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2.902] (**) Option "xkb_rules" "evdev"
[ 2.902] (**) Option "xkb_model" "evdev"
[ 2.902] (**) Option "xkb_layout" "us"
[ 2.902] (**) Option "xkb_variant" "dvp"
[ 2.913] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 2.913] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2.913] (II) Using input driver 'evdev' for 'Power Button'
[ 2.913] (**) Power Button: always reports core events
[ 2.913] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 2.913] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2.913] (--) evdev: Power Button: Found keys
[ 2.913] (II) evdev: Power Button: Configuring as keyboard
[ 2.913] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 2.913] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2.913] (**) Option "xkb_rules" "evdev"
[ 2.913] (**) Option "xkb_model" "evdev"
[ 2.913] (**) Option "xkb_layout" "us"
[ 2.913] (**) Option "xkb_variant" "dvp"
[ 2.913] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event14)
[ 2.913] (II) No input driver specified, ignoring this device.
[ 2.913] (II) This device may have been added with another device file.
[ 2.913] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event15)
[ 2.913] (II) No input driver specified, ignoring this device.
[ 2.913] (II) This device may have been added with another device file.
[ 2.913] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event16)
[ 2.913] (II) No input driver specified, ignoring this device.
[ 2.913] (II) This device may have been added with another device file.
[ 2.913] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event17)
[ 2.913] (II) No input driver specified, ignoring this device.
[ 2.913] (II) This device may have been added with another device file.
[ 2.913] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event18)
[ 2.913] (II) No input driver specified, ignoring this device.
[ 2.913] (II) This device may have been added with another device file.
[ 2.913] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event19)
[ 2.914] (II) No input driver specified, ignoring this device.
[ 2.914] (II) This device may have been added with another device file.
[ 2.914] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event10)
[ 2.914] (II) No input driver specified, ignoring this device.
[ 2.914] (II) This device may have been added with another device file.
[ 2.914] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
[ 2.914] (II) No input driver specified, ignoring this device.
[ 2.914] (II) This device may have been added with another device file.
[ 2.914] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event4)
[ 2.914] (II) No input driver specified, ignoring this device.
[ 2.914] (II) This device may have been added with another device file.
[ 2.914] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event5)
[ 2.914] (II) No input driver specified, ignoring this device.
[ 2.914] (II) This device may have been added with another device file.
[ 2.914] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event6)
[ 2.914] (II) No input driver specified, ignoring this device.
[ 2.914] (II) This device may have been added with another device file.
[ 2.914] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event7)
[ 2.914] (II) No input driver specified, ignoring this device.
[ 2.914] (II) This device may have been added with another device file.
[ 2.914] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event8)
[ 2.914] (II) No input driver specified, ignoring this device.
[ 2.914] (II) This device may have been added with another device file.
[ 2.914] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event9)
[ 2.914] (II) No input driver specified, ignoring this device.
[ 2.914] (II) This device may have been added with another device file.
[ 2.914] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event12)
[ 2.914] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 2.914] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 2.914] (**) Logitech USB Receiver: always reports core events
[ 2.914] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event12"
[ 2.914] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 2.914] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 2.914] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 2.914] (--) evdev: Logitech USB Receiver: Found relative axes
[ 2.914] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 2.914] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 2.914] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 2.914] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 2.914] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2.914] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7:1.0/input/input12/event12"
[ 2.914] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
[ 2.914] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 2.915] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 2.915] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 2.915] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 2.915] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 2.915] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 2.915] (II) No input driver specified, ignoring this device.
[ 2.915] (II) This device may have been added with another device file.
[ 2.915] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event13)
[ 2.915] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 2.915] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 2.915] (**) Logitech USB Receiver: always reports core events
[ 2.915] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event13"
[ 2.915] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 2.915] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 2.915] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 2.915] (--) evdev: Logitech USB Receiver: Found relative axes
[ 2.915] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 2.915] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 2.915] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 2.915] (--) evdev: Logitech USB Receiver: Found keys
[ 2.915] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 2.915] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 2.915] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 2.915] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 2.915] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2.915] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7:1.1/input/input13/event13"
[ 2.915] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 2.915] (**) Option "xkb_rules" "evdev"
[ 2.915] (**) Option "xkb_model" "evdev"
[ 2.915] (**) Option "xkb_layout" "us"
[ 2.915] (**) Option "xkb_variant" "dvp"
[ 2.915] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 2.915] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 2.915] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 2.915] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 2.915] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 2.915] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 2.915] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2.915] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2.915] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2.915] (**) AT Translated Set 2 keyboard: always reports core events
[ 2.915] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2.915] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2.915] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2.915] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2.915] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2.915] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 2.915] (**) Option "xkb_rules" "evdev"
[ 2.915] (**) Option "xkb_model" "evdev"
[ 2.915] (**) Option "xkb_layout" "us"
[ 2.915] (**) Option "xkb_variant" "dvp"
[ 2.915] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 2.915] (II) No input driver specified, ignoring this device.
[ 2.915] (II) This device may have been added with another device file.
[ 2.917] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 7.513] (II) fglrx(0): EDID vendor "SAM", prod id 1316
[ 7.513] (II) fglrx(0): Using EDID range info for horizontal sync
[ 7.513] (II) fglrx(0): Using EDID range info for vertical refresh
[ 7.513] (II) fglrx(0): Printing DDC gathered Modelines:
[ 7.513] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 7.513] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 7.513] (II) fglrx(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 7.513] (II) fglrx(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 7.513] (II) fglrx(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 7.513] (II) fglrx(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 7.513] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.513] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 7.513] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.513] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.513] (II) fglrx(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 7.513] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 7.513] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 7.513] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 7.513] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 7.513] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 10.738] (II) fglrx(0): EDID vendor "SAM", prod id 1316
[ 10.738] (II) fglrx(0): Using hsync ranges from config file
[ 10.738] (II) fglrx(0): Using vrefresh ranges from config file
[ 10.738] (II) fglrx(0): Printing DDC gathered Modelines:
[ 10.738] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 10.738] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 10.738] (II) fglrx(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 10.738] (II) fglrx(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 10.738] (II) fglrx(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 10.738] (II) fglrx(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 10.738] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 10.738] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 10.738] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 10.738] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 10.738] (II) fglrx(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 10.738] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 10.738] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 10.738] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 10.738] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 10.738] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
Here's the Xorg.conf:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:6:0:0"
Option "OpenGLOverlay" "0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Setting the PCI BusID in Xorg.conf seems to have no effect, even if I set it to 6:0:0 or 7:0:0, its still the same.
Do I need to set AutoAddDevices off?

MisterAnderson wrote:Does the same happen with the opensource radeon drivers? (xf86-video-ati)
Thanks for the reply!
The open source driver doesn't support my card yet. I tried installing it first since its the recommended driver, but Xorg couldn't detect any display at all.
It seems the PCI BusID is not being read from the xorg.conf file. There's auto detection everytime the PC boots.
Last edited by hdhiman (2012-10-04 00:43:52)

Discrete graphics card not detected.

First post.
System specs:
Mobo: MSI Z77A-GD55
CPU: Intel Ivy Bridge i5 3570K
GPU: eVGA GTX 580
PSU: NZXT Hale82 750W 80 Certified
RAM: G Skill Sniper Series 1866 8Gb DD3
SSD: Corsair Force Series GT 240G
For starters, I was running a CoolerMaster 1000W PSU and the eVGA 580 GTX in my old system. Upon upgrading, I transferred those units to the new system but can not boot up system with GTX 580. Onboard graphics work fine, so I went ahead and installed Windows onto the SSD with no problems. Once in Windows, I installed the latest Motherboard updates, and even flashed the BIOS to latest 1.4 build. Still no luck with the graphics card working on boot up.
Things I've tried:
- GTX 580 boots up and works fine (hence the system running now) on older Motherboard.
-Ruling out a defective GPU unit.
- Both Coolermaster and NZXT PSU run the GTX 580 on older Motherboard.
-Ruling out a defective PSU unit.
- Graphics card (GTX 580) would not boot up on ASUS P8Z77-V Pro Motherboard, nor the new one MSI Z77A-GD55
-Possibly ruling out defective Motherboards.
- Replaced i5 3570k CPU with yet another i5 3560k CPU (Same issue)
-Ruling out a defective CPU
- When using onboard VGA, I can get into the BIOS and the Graphics settings are set to PEG (PCI-E Graphics). Although when I shut down and install my GtX 580, still no boot up.
- Moved the GTX 580 between the 2 top PCI-E slots, to no avail.
- Moved 1 stick of RAM between the 4 DIMM slots and still not working.
-Reseated graphics card and made sure the 8-pin and 6-pin connectors were firmly intact.
I have done a lot of research, but have yet to find a definitive answer to my problem. I'm not ruling out a 3rd motherboard that may be defective, but I feel this is highly unlikely. Again, everything works and checks out in the system specs with the onboard graphics enabled.
I thought I'd try here to get some addition ideas from the group. Thanks for reading.

Quote from: HU16E on 02-July-12, 12:47:41
Try this; Shutdown, remove the discrete card, connect to the onboard, restart and boot all the way into Windows, restart to the UEFI/BIOS, change the graphics setting to IGD, save and enter, let it reboot into Windows, hard shutdown. Restart into UEFI/BIOS, change graphics setting to PEG, save and enter first, then hit the reset button and enter immediately back into the UEFI/BIOS checking to make sure the PEG setting is in fact set, then hard shutdown. Install the discrete card connecting all the power cables and monitor cable, start and see if it now boots into Windows with the graphics now working.
This merry-go-round procedure worked for me on 3 Z68's, no reason it won't work on a Z77.
I will try this procedure now. If it works, I will have to buy you lunch because I have NEVER heard of such hoopla!

Graphics Card not enabling while i install REDHAT LINUX 5.

I use HP PAVILLION MODEL DV5-1106AX. It contains AMD processor and ATI graphics card.While i try to install REDHAT LINUX SERVER 5 in my laptop, the graphics card not enabling.Why it happen?
please reply to <text removed for privacy>
Message Edited by WendyM on 11-18-2009 12:51 PM

MisterAnderson wrote:Does the same happen with the opensource radeon drivers? (xf86-video-ati)
Thanks for the reply!
The open source driver doesn't support my card yet. I tried installing it first since its the recommended driver, but Xorg couldn't detect any display at all.
It seems the PCI BusID is not being read from the xorg.conf file. There's auto detection everytime the PC boots.
Last edited by hdhiman (2012-10-04 00:43:52)

Total available graphics memory not detected

I was trying to connect my notebook to tv useing HDMI cable, got message - no signal, and it said to check my drivers. I checked display adapter and monitor driver, it says they are up to date.
In performance information and tools it says - total available graphics memory not detected.
In control panel/display/advanced settings - graphics card is listed.

Hi,
The following link shows its specs:
http://www8.hp.com/emea_africa/en/products/laptops/product-detail.html?oid=7427730#!tab=specs
It uses:
Graphics Integrated:
Intel® HD Graphics
And information is right with 64MB of VRAM. System will assign available system RAM to graphics up to max allowed when required. Please try to hit F4 to send signals to monitor.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How long it takes to repair an Apple iPad with the error "sim card not detected". The ipad is in Apple since 19 January and still has the status "Repair in Progress".

How long it takes to repair an Apple iPad with the error "sim card not detected". The ipad is in Apple since 19 January and still has the status "Repair in Progress".

There is no way any fellow user here can know anything specific about your repair status. You will need to call Apple and ask them yourself.

TS4317 graphics cards not work

video file is not working graphics card not working is their is any software that i can update. or tell me why its not working

If you can see an image on your screen then your graphics card (Intel HD Graphics 3000) integrated into your 13" machine is working just fine.
I'm not sure what you mean when you say that a video file isn't working... how exactly isn't it 'working' and what file format is it in?
Clinton

Z30, sim card not detected

My Z30 just few months old, sim card not detect, can someone help? thanks a lot..

Hello,
Have you tested the SIM in another device? Have you tested another known-good SIM in this device? Is there an error message? Has it ever worked?
Let us know.

GTX770 graphics card not recognised - Z97 Gaming 5

I have a GTX650Ti and a GTX770 into my Z97 Gaming 5. The GTX650 works fine, but the 770 is not recognised by the board at all.
I tried the 770 in every slot, with or without the 650.
I tried swapping the power cables to both cards and it did not make a difference,
I then removed the 770 and put it in the board I was replacing, using the same cables and power supply and it worked fine.
The BIOS has been updated to version 1.3
I checked the board explorer in the BIOS and it shows that slot as empty.
Any clues why this would happen? Is there anything I need to do to get this card to work?

list full and detailed system specifications, see >>Posting Guide<<
Quote
I have a 750W power supply
brand? exact model?
Quote
GTX770 graphics card not recognised
is this MSI card? if so which one model exactly?

Graphics Card Not Available

I have purchased Compaq 15-s103TX Notebook on 25th December, I have installed Windows 7 ulimate 32bit,
After intallation i cheched system device management, In display adapter my system shown only standard VGA adapter,
NVIDIA 2GB Graphics card not available,
Kindly Help me....

Hi:
You notebook is not designed to run a 32 bit operating system and there are no graphics drivers for it from HP.
You will have to try these steps and if they don't work, I'm afraid you are out of luck...and will need to install a supported 64 bit operating system.
1. Install the Intel chipset driver and reboot.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816
2. Install the Intel HD graphics driver and reboot.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24246
3. Install the nvidia graphics driver and reboot.
http://www.nvidia.com/download/driverResults.aspx/80914/en-us

Sound Blaster Live 24-bit PCI Sound Card and Creative Sound Blaster PCI Card not detect

Ok here is my problem. I bought a Creative Sound Blaster PCI sound card a while back and it was working fine but recently when I would boot up my computer and try to play music say off of Winamp it says Bad DirectSound Driver. When I check device manager it shows no sound card there and in sounds and audio devices it says no audio device. Now my brother believed this to be a card fault so we went to Frys and bought a Sound Blaster Li've 24-bit PCI card. I uninstalled the old drivers and installed this new one but yet it's the same problem. My assumption was that Windows XP had something conflicting so I reinstalled the OS. It found the card and I installed the latest drivers?off of this site but now it does the same thing yet again with a fresh install of Windows XP. The card has been in all 3 of my PCI slots and it will detect it for a moment but then acts like as if the card was never installed. Like I never installed a sound card into the computer. The onboard audio has been disabled for a while now but I do not know what the problem could be. I did Scan for hardware changes but it doesn't show up. Sometimes when the card is detected if I do scan for hardware changes and the card is there it will just magically disappear from the device manager as if it was never there. Even when I try to load music and I see the card is detected it will not play the music and ends up locking up Winamp to the point that sometimes will go BSOD. Now I would really like to find out what the issue is because I am planning this weekend to swap out my motherboard with a duplicate board to see if that will end up fixing the problem but I want to find out if there is any other way to fix this issue. Thank you.Message Edited by AuXoIs on 02-25-200808:28 PM

Hmm what other options is there for the bios on PCI slots?Also anything you connect to the motherboard can have oxidization (I think its that) build up on the connection. Check the connector on the card and get a eraser (Pen eraser is better) and give it a good cleaning. The connector might have alot of build-up on it and you can see it by a dark yellowy colour. I cleaned my graphics card and ram connectors after they got alot of the build-up on them. On a older computer my graphics stopped working and this fixed it. Also I went away for a while (like a month) and came back to see that my puter didn't display anything. Opened it up and saw that the graphic card had alot of corrosion? on the card connector and in the slot. Does that if you computer is turned of for a long time. Had a heck of time trying to clean the slot out. One other thing that it could be is the sound card is faulty. I had an audigy 2 and it died a while back . It picks it up and then try and use it computer freezes and the after restart it's not there anymore. Hope it's not that problem. Hope this gives you something to go by.

Radeon r9 290 graphics card no detection on system??!

Got a Radeon r9 290 graphics card in a msi 797-g45 gaming motherboard and the graphic card is not being detected.. i go into bio's and no sign of it being there. The fans works fine on the graphics card but no detection it being used by teh system??
i bought this card a while back in September 2014 and only recently chucked my new computer. i've tried everything. pretty gutted at the moment. any suggestions???

797-g45 doesn't exist. Do you mean Z97?
What is your PC made of: PSU, RAM, CPU, BIOS version. Provide detailed info (brand/model/amount>RAM< /wattage>PSU<) What radeon r9 290 exactly it is?

AMD Radeon Graphics Card Not Found! Please Help HP Envy M6...

When I head into device manager, it shows that I have only an Inter (R) HD Graphics 4000 graphics card even though the laptop is said to have an AMD Radeon built in... I've upgraded my version of Windows but it doesn't make sense, why does this driver go away? I've reinstalled every driver there is for the AMD series... I can't get my laptop to detect the graphics card, has anyone had this problem? I've seen this on threads too but the answers weren't helpful at all because they just redirected the user with a link to another thread which isn't relating to a graphics card. Is there any way I can fix this so my laptop can detect my graphics card?
Note: When I run AMD's 'automatic driver checker', it CANT EVEN DETECT IT ... Please help me, there's just one too many problems with this laptop aside from the fact that it overheats like crazy.
Thank you,
Shehryar.

This is the picture that I've taken, you can see that the Intel HD Graphics 4000 is indeed there however, I found an unknown device at the bottom. There is NO information of this device, here is the 'info' for the unknown device:
Device type : Other
Manufacturer : Unknown
Location : On PCI Express Root ComplexUpdate driver will not work. I'll look for more but that's really it... Thanks Shovon_Khan!

Graphic Card not shown for HP Pavilion 15-n027sl

Hi, I upgraded this laptop to Windows 8.1 , I've installed last AMD CCC Drivers but my games recognise only my internal graphic card (HD 8330) and not the HD 8670M, in permormance mode and in battery save mode. The PC recognises this card, but I don't know if I'm using it. Benchmarks shows only the internal one.

Hi Z4m4krOn,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I grasp that only the HD8330 graphic card is being recognized after updating to Windows 8.1.
Are all your windows updates done?
Is it being seen in Device Manager?
Here is a link to HP Pavilion 15-n027sl Notebook PC Drivers where you can get the recommended drivers.
You could also run The HP Support Assistant to aid with updates and resolving issues.
There is a bios update for your notebook also. Updating the BIOS.
I suggest contacting HP to aid with updating the bios, as it does have a potential to cause issues.
Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
Windows 8 has a built in troubleshooter.
Press the Windows key + C to open charms
Type troubleshoot graphics in the search bar and press enter
Follow the on screen prompts.
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

PCMCIA Realtek Ethernet card not detected

Hi, I'm trying to use a PCMCIA Etherner Card with Realtek chip.
If the card it's already plugged when booting, Udev takes 180000 ms to finish and the card doesn't work. If it's plugged while booted, dmesg shows that there's a "something" at SmartCardBus but, again, card doesn't get recognized.
"Ifconfig -a" shows nothing, and I know the card works 'cause I've tryed with an Ubuntu cd and the cards works perfect. I've looked for the modules, and 8139too & 8139cp where loaded, wich I've tryed in arch and still doesn't work, It also detects the same hardware with lspci (Arch detects the Cardbus but not the realtek card, Ubuntu detects both) and lspcmcia.
Ubuntu is using kernel 2.6.27-7 and Arch 2.6.28.
hwd -e:
1217:7113 CardBus bridge: 02 Micro, Inc. module:yanta_cardbus
OZ711EC1 SmartCardBus Controller
lspmcia:
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:02:01.0)
CardBus card -- see "lspci" for more information
Socket 1 Bridge: [yenta_cardbus] (bus ID: 0000:02:01.1)
Socket 1 Device 0: [-- no driver --] (bus ID: 1.0)
lspci:
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 [Mobility FireGL 9000] (rev 02)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev ff)
02:01.0 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller (rev 20)
02:01.1 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller (rev 20)
02:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
dmesg:
int3: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:02:03.0/class
Modules linked in: usb_storage joydev ppdev iTCO_wdt iTCO_vendor_support ehci_hcd psmouse uhci_hcd parport_pc lp serio_raw usbcore shpchp pci_hotplug sg video output parport pcspkr ppp_generic intel_agp agpgart pcmcia dcdbas thermal evdev fan button battery ac acpi_cpufreq freq_table processor snd_intel8x0m snd_seq_oss snd_intel8x0 snd_seq_midi_event snd_seq snd_seq_device snd_ac97_codec snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus ipw2200 ieee80211 ieee80211_crypt tg3 libphy slhc rtc_cmos rtc_core rtc_lib ext3 jbd mbcache sr_mod cdrom yenta_socket rsrc_nonstatic pcmcia_core sd_mod ata_piix ata_generic pata_acpi libata scsi_mod
Pid: 435, comm: pccardd Not tainted (2.6.28-ARCH #1) Inspiron 600m
EIP: 0060:[<c044dce0>] EFLAGS: 00000246 CPU: 0
EIP is at quirk_h12y_1_mmio+0x1/0x26
EAX: de4fc800 EBX: c03cbdc0 ECX: de4fc840 EDX: de4fc800
ESI: c03cc110 EDI: de4fc800 EBP: df8ae400 ESP: df1b9ef4
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process pccardd (pid: 435, ti=df1b8000 task=df1ba000 task.ti=df1b8000)
Stack:
c02192c3 de4fc800 df8ae400 de4fc800 c0216a59 00000200 00000000 c031c93c
de4fc826 c03b3d25 00000000 00000003 00000000 00000000 00000001 df8ae420
de4fc858 00000200 813910ec 00ffffed 00000000 00000000 00000000 df8ae400
Call Trace:
[<c02192c3>] pci_fixup_device+0x63/0xc0
[<c0216a59>] pci_device_add+0x69/0xb0
[<c031c93c>] pci_scan_single_device+0x35c/0x4f0
[<c0216ac3>] pci_scan_slot+0x23/0x80
[<e0bd850f>] cb_alloc+0x1f/0xd4 [pcmcia_core]
[<e0bd4854>] socket_insert+0x124/0x140 [pcmcia_core]
[<e0bd5202>] pccardd+0x202/0x290 [pcmcia_core]
[<e0bd5000>] pccardd+0x0/0x290 [pcmcia_core]
[<c01440f9>] kthread+0x39/0x70
[<c01440c0>] kthread+0x0/0x70
[<c0104d33>] kernel_thread_helper+0x7/0x14
Code: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc <cc> cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
EIP: [<c044dce0>] quirk_h12y_1_mmio+0x1/0x26 SS:ESP 0068:df1b9ef4
---[ end trace 6fe320c81d500dc7 ]---
note: pccardd[435] exited with preempt_count 1
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized radeon 1.29.0 20080528 on minor 0
agpgart-intel 0000:00:00.0: AGP 2.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
pci 0000:01:00.0: putting AGP V2 device into 4x mode
[drm] Setting GART location based on new memory map
[drm] Loading R200 Microcode
[drm] writeback test succeeded in 2 usecs
rc.conf:
MODULES=(slhc tg3 ipw2200 ac97_bus snd-mixer-oss snd-pcm-oss snd-page-alloc snd-pcm snd-timer snd snd-ac97-codec snd-intel8x0 snd-intel8x0m soundcore acpi-cpufreq)
DAEMONS=(syslog-ng network netfs dbus hal !crond cpufreq fam avahi-daemon pcmcia)
I've tryed loading: 8139too 8139cp pcmcia_core pcmcia yenta_socket rsrc_nonstatic
The bradcom is the original eth port wich I'm replacing because stop working long time ago (And I also tryed disabling it from BIOS, and it's the same).
I'm mising something that I should load or run? I've googled a lot, but people just plug the card and that's all :-P. Any idea would be welcomed :-).
EDIT: Fix title (PMCIA*)
Last edited by el_zoona (2009-01-22 07:25:00)

Nevermind...It's Kernel 2.6.28...I'm a lucky guy, eh? :-(
Booted into Arch Overlod cd and a simple lspci show my shiny new card...Now i'm going to erase my hole system (it was new anyway) and check if a Suy breaks the drivers again. In that case, i should file a bug somewhere, right?

Graphics Card not detected.

Similar Messages

Maybe you are looking for