Graphics card not supported - GMA X3100

I've replaced a Macbook 2.0GHz from 2006 with 64MB shared video memory with a brand new 2.2 GHz with 144MB shared video memory. But when I start MainStage, I get the message that my graphics card is not supported.
Any idea why is that?
I haven't done any updates. Would that do it?
Thanks.

Thanks Blueberry

Similar Messages

  • Aperture 3 suddenly telling me Graphics card not supported

    I have a Macmini 1.66ghz Intel with GMA 950 card.
    I've been using Aperture without issue but tried to open it this morning and received the message that the Graphics Card isn't supported. Running 10.6.3 and the latest version of Aperture 3.
    Any ideas??
    Thanks.

    I got this message today after my MacPro computer froze last night while I was uploading some photos to SmugMug:
    ERROR
    The installed graphics card does not meet the minimum requirements for Aperture.
    WT**?
    I am having the full array of problems other people have posted about the upgrade to 10.6.4. I upgraded to Ap3 at the same time. I do not need any other heart ache with my Mac. Please help.

  • Graphics card not supported?

    I have a 2008 Mac Pro, 8 core, 2.8GHz system.  It has the ATI Radeon 2600 video card, with 256MB of GDDR3 RAM.  I want to purchase and play the upcoming Bioshock 2 game, but it says that my card is not supported, but I am curious if the game will still play, but maybe at lower settings, or lower frame rate.  My question is does "not supported" mean that it will not run at all?
    Jared

    Thanks,
    Sounds like I need a better card, or forget about this game.
    Jared

  • Graphics Card not enabling while i install REDHAT LINUX 5.

    I use HP PAVILLION MODEL DV5-1106AX. It contains AMD processor and ATI graphics card.While i try to install REDHAT LINUX SERVER 5 in my laptop, the graphics card not enabling.Why it happen?
    please reply to <text removed for privacy>
    Message Edited by WendyM on 11-18-2009 12:51 PM

    MisterAnderson wrote:Does the same happen with the opensource radeon drivers? (xf86-video-ati)
    Thanks for the reply!
    The open source driver doesn't support my card yet. I tried installing it first since its the recommended driver, but Xorg couldn't detect any display at all.
    It seems the PCI BusID is not being read from the xorg.conf file. There's auto detection everytime the PC boots.
    Last edited by hdhiman (2012-10-04 00:43:52)

  • Graphics Card Not Available

    I have purchased Compaq 15-s103TX Notebook on 25th December, I have installed Windows 7 ulimate 32bit,
    After intallation i cheched system device management, In display adapter my system shown only standard VGA adapter,
    NVIDIA 2GB Graphics card not available,
    Kindly Help me....

    Hi:
    You notebook is not designed to run a 32 bit operating system and there are no graphics drivers for it from HP.
    You will have to try these steps and if they don't work, I'm afraid you are out of luck...and will need to install a supported 64 bit operating system.
    1. Install the Intel chipset driver and reboot.
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816
    2. Install the Intel HD graphics driver and reboot.
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24246
    3. Install the nvidia graphics driver and reboot.
    http://www.nvidia.com/download/driverResults.aspx/80914/en-us

  • TS4317 graphics cards not work

    video file is not working graphics card not working is their is any software that i can update. or tell me why its not working

    If you can see an image on your screen then your graphics card (Intel HD Graphics 3000) integrated into your 13" machine is working just fine.
    I'm not sure what you mean when you say that a video file isn't working... how exactly isn't it 'working' and what file format is it in?
    Clinton

  • Intel Graphics Processors Not Supported!?!?!?

    So I read the Logic Studio system requirements and bought the new version for my Core 2 Duo white MacBook, since it fits the specs. I'm just about to install and I read the "Before You Install" doc.
    It says about STP and Compressor, "Integrated Intel graphics processors not supported.) Whatthe?
    What does this mean? That STP and Compressor won't install on my MacBook?
    Shouldn't this have been in the Logic Studio system requirements?
    I'm stuck and don't want to install now at all.
    Help?

    Well, it all installed, though when I launched STP, it threw up a dialog that said it might not work properly with less the 128 MB VRAM. Oh, joy. We shall see.
    Apple really needs to put this on their LogicStudio System Requirements page.

  • Sim card not supported after unlock iphone 5c

    iphone 5c, 12.7 GB, version 8.1.1, after unlocking when i connect it to itunes w/ other sim, sim card not supported error registered,. i check it to IMEI and its unlock, but why icant use it? I try to restore to itunes and erase my iphone nothing works, what can i do?

    How was the phone unlocked?  Was it unlocked by your previous carrier?  The only way to unlock your phone is to have your previous carrier unlock it for you.
    If you phone was unlocked in any other way, this constitutes hacking or jailbreaking and your phone will not work with another sim card.
    Get the phone unlocked properly by your carrier and there is no reason why it should not work.

  • I phone blocked! Sim card not supported!

    I phone blocked! Sim card not supported!
    Recently bought an Iphone here in the Republic of Congo for about $600 and it was working fine until an update on Itunes. Now the phone just shows a USB cable and I tunes logo. When I connect the phone to Itunes it wants to restore and update, but then just blocks the phone again.

    Who did you by the phone from? Apple? A telecom company? Ebay?
    The phone was most likely jailbroken and unlocked. Applying the latest firmware updated undid that.
    A

  • I installed new 6.0.1 os it is done succesfully but after that insterted my sim it is showing sim card not supported any one plz help me

    i installed new 6.0.1 os it is done succesfully but after that insterted my sim it is showing sim card not supported any one plz help me

    That message occurs when updating a phone that was hacked to be used with your network.  Upgrading the phone has re-locked it to it's rightful carrier.  You will need a SIM from the original carrier to proceed.

  • 1st think my billing info is not support debit card not support by apple 2nd think is my old I'd is not working even free app in app store......

    1st think my billing info is not support debit card not support by apple 2nd think is my old I'd is not working even free app in app store......

    1st think my billing info is not support debit card not support by apple 2nd think is my old I'd is not working even free app in app store......

  • GTX770 graphics card not recognised - Z97 Gaming 5

    I have a GTX650Ti and a GTX770 into my Z97 Gaming 5. The GTX650 works fine, but the 770 is not recognised by the board at all.
    I tried the 770 in every slot, with or without the 650.
    I tried swapping the power cables to both cards and it did not make a difference,
    I then removed the 770 and put it in the board I was replacing, using the same cables and power supply and it worked fine.
    The BIOS has been updated to version 1.3
    I checked the board explorer in the BIOS and it shows that slot as empty.
    Any clues why this would happen? Is there anything I need to do to get this card to work?

    list full and detailed system specifications, see >>Posting Guide<<
    Quote
    I have a 750W power supply
    brand? exact model?
    Quote
    GTX770 graphics card not recognised
    is this MSI card? if so which one model exactly?

  • Graphic Card not shown for HP Pavilion 15-n027sl

    Hi, I upgraded this laptop to Windows 8.1 , I've installed last AMD CCC Drivers but my games recognise only my internal graphic card (HD 8330) and not the HD 8670M, in permormance mode and in battery save mode. The PC recognises this card, but I don't know if I'm using it. Benchmarks shows only the internal one.

    Hi Z4m4krOn,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I grasp that only the HD8330 graphic card is being recognized after updating to Windows 8.1.
    Are all your windows updates done?
    Is it being seen in Device Manager?
    Here is a link to HP Pavilion 15-n027sl Notebook PC Drivers where you can get the recommended drivers.
    You could also run The HP Support Assistant to aid with updates and resolving issues. 
    There is a bios update for your notebook also.  Updating the BIOS.
    I suggest contacting HP to aid with updating the bios, as it does have a potential to cause issues.
    Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
    Windows 8 has a built in troubleshooter.
    Press the Windows key + C to open charms
    Type troubleshoot graphics in the search bar and press enter
    Follow the on screen prompts.
    I hope this helps.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • ATI Graphics card not detected on cold boot, works on warm boot

    Hi All,
    I hope you can help me out with this.
    I'm using Radeon HD7850 with ATI-Catalyst.
    The issue is, if I do a cold boot (physically turn off the power, turn back on) the system won't boot into X, only tty.
    At this point, a reboot works fine.
    Or if I don't turn off the power, just shutdown and reboot (warm boot), it works ok.
    Here's the Xorg log on cold boot:
    [ 2.226]
    X.Org X Server 1.12.4
    Release Date: 2012-08-27
    [ 2.226] X Protocol Version 11, Revision 0
    [ 2.226] Build Operating System: Linux 3.4.8-1-ARCH x86_64
    [ 2.226] Current Operating System: Linux dmanPC 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 09:14:51 CEST 2012 x86_64
    [ 2.226] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=3766a71b-dbfe-4cc2-b7bd-948878b5da67 ro nomodeset quiet
    [ 2.226] Build Date: 27 August 2012 08:04:39AM
    [ 2.226]
    [ 2.226] Current version of pixman: 0.26.2
    [ 2.226] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2.226] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2.226] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 28 05:57:41 2012
    [ 2.227] (==) Using config file: "/etc/X11/xorg.conf"
    [ 2.228] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2.228] (==) ServerLayout "aticonfig Layout"
    [ 2.228] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 2.228] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 2.229] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 2.229] (==) Automatically adding devices
    [ 2.229] (==) Automatically enabling devices
    [ 2.231] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2.231] Entry deleted from font path.
    [ 2.231] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 2.231] Entry deleted from font path.
    [ 2.231] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2.231] Entry deleted from font path.
    [ 2.231] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2.232] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2.232] Entry deleted from font path.
    [ 2.232] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2.232] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 2.232] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2.232] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2.232] (II) Loader magic: 0x7c8b00
    [ 2.232] (II) Module ABI versions:
    [ 2.232] X.Org ANSI C Emulation: 0.4
    [ 2.232] X.Org Video Driver: 12.1
    [ 2.232] X.Org XInput driver : 16.0
    [ 2.232] X.Org Server Extension : 6.0
    [ 2.232] (--) PCI:*(0:7:0:0) 1002:6819:1462:2730 rev 0, Mem @ 0xe0000000/268435456, 0xf7b00000/262144, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
    [ 2.232] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 2.232] (II) "extmod" will be loaded by default.
    [ 2.232] (II) "dbe" will be loaded by default.
    [ 2.232] (II) "glx" will be loaded by default.
    [ 2.232] (II) "record" will be loaded by default.
    [ 2.232] (II) "dri" will be loaded by default.
    [ 2.232] (II) "dri2" will be loaded by default.
    [ 2.232] (II) LoadModule: "extmod"
    [ 2.233] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 2.233] (II) Module extmod: vendor="X.Org Foundation"
    [ 2.233] compiled for 1.12.4, module version = 1.0.0
    [ 2.233] Module class: X.Org Server Extension
    [ 2.233] ABI class: X.Org Server Extension, version 6.0
    [ 2.233] (II) Loading extension MIT-SCREEN-SAVER
    [ 2.233] (II) Loading extension XFree86-VidModeExtension
    [ 2.233] (II) Loading extension XFree86-DGA
    [ 2.233] (II) Loading extension DPMS
    [ 2.233] (II) Loading extension XVideo
    [ 2.233] (II) Loading extension XVideo-MotionCompensation
    [ 2.233] (II) Loading extension X-Resource
    [ 2.233] (II) LoadModule: "dbe"
    [ 2.233] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 2.234] (II) Module dbe: vendor="X.Org Foundation"
    [ 2.234] compiled for 1.12.4, module version = 1.0.0
    [ 2.234] Module class: X.Org Server Extension
    [ 2.234] ABI class: X.Org Server Extension, version 6.0
    [ 2.234] (II) Loading extension DOUBLE-BUFFER
    [ 2.234] (II) LoadModule: "glx"
    [ 2.234] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2.236] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 2.236] compiled for 6.9.0, module version = 1.0.0
    [ 2.236] (II) Loading extension GLX
    [ 2.236] (II) LoadModule: "record"
    [ 2.236] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 2.237] (II) Module record: vendor="X.Org Foundation"
    [ 2.237] compiled for 1.12.4, module version = 1.13.0
    [ 2.237] Module class: X.Org Server Extension
    [ 2.237] ABI class: X.Org Server Extension, version 6.0
    [ 2.237] (II) Loading extension RECORD
    [ 2.237] (II) LoadModule: "dri"
    [ 2.237] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 2.237] (II) Module dri: vendor="X.Org Foundation"
    [ 2.237] compiled for 1.12.4, module version = 1.0.0
    [ 2.237] ABI class: X.Org Server Extension, version 6.0
    [ 2.237] (II) Loading extension XFree86-DRI
    [ 2.237] (II) LoadModule: "dri2"
    [ 2.238] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 2.238] (II) Module dri2: vendor="X.Org Foundation"
    [ 2.238] compiled for 1.12.4, module version = 1.2.0
    [ 2.238] ABI class: X.Org Server Extension, version 6.0
    [ 2.238] (II) Loading extension DRI2
    [ 2.238] (II) LoadModule: "fglrx"
    [ 2.238] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 2.262] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
    [ 2.262] compiled for 1.4.99.906, module version = 8.98.2
    [ 2.262] Module class: X.Org Video Driver
    [ 2.262] (II) Loading sub module "fglrxdrm"
    [ 2.262] (II) LoadModule: "fglrxdrm"
    [ 2.262] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 2.263] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 2.263] compiled for 1.4.99.906, module version = 8.98.2
    [ 2.263] (II) AMD Proprietary Linux Driver Version Identifier:8.98.2
    [ 2.263] (II) AMD Proprietary Linux Driver Release Identifier: 8.982
    [ 2.263] (II) AMD Proprietary Linux Driver Build Date: Jul 27 2012 20:37:56
    [ 2.263] (++) using VT number 8
    [ 2.264] (WW) Falling back to old probe method for fglrx
    [ 2.269] (II) Loading PCS database from /etc/ati/amdpcsdb
    [ 2.271] (WW) fglrx: No matching Device section for instance (BusID ) found
    [ 2.271] (EE) No devices detected.
    [ 2.271]
    Fatal server error:
    [ 2.271] no screens found
    [ 2.271]
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 2.271] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 2.271]
    Here's the same log for warm boot:
    [ 2.289] (++) using VT number 8
    [ 2.290] (WW) Falling back to old probe method for fglrx
    [ 2.295] (II) Loading PCS database from /etc/ati/amdpcsdb
    [ 2.296] (--) Chipset Supported AMD Graphics Processor (0x6819) found
    [ 2.296] (WW) fglrx: No matching Device section for instance (BusID PCI:0@6:0:1) found
    [ 2.297] (II) AMD Video driver is running on a device belonging to a group targeted for this release
    [ 2.297] (II) AMD Video driver is signed
    [ 2.297] (II) fglrx(0): pEnt->device->identifier=0x82b7a0
    [ 2.297] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
    [ 2.297] (II) Loading sub module "vgahw"
    [ 2.297] (II) LoadModule: "vgahw"
    [ 2.298] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [ 2.298] (II) Module vgahw: vendor="X.Org Foundation"
    [ 2.298] compiled for 1.12.4, module version = 0.1.0
    [ 2.298] ABI class: X.Org Video Driver, version 12.1
    [ 2.298] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [ 2.298] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 2.298] (==) fglrx(0): Default visual is TrueColor
    [ 2.298] (**) fglrx(0): Option "OpenGLOverlay" "0"
    [ 2.298] (**) fglrx(0): Option "DPMS" "true"
    [ 2.298] (==) fglrx(0): RGB weight 888
    [ 2.298] (II) fglrx(0): Using 8 bits per RGB
    [ 2.298] (==) fglrx(0): Buffer Tiling is ON
    [ 2.299] (II) Loading sub module "fglrxdrm"
    [ 2.299] (II) LoadModule: "fglrxdrm"
    [ 2.299] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 2.299] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 2.299] compiled for 1.4.99.906, module version = 8.98.2
    [ 2.299] ukiDynamicMajor: found major device number 251
    [ 2.299] ukiDynamicMajor: found major device number 251
    [ 2.299] ukiOpenByBusid: Searching for BusID PCI:6:0:0
    [ 2.299] ukiOpenDevice: node name is /dev/ati/card0
    [ 2.299] ukiOpenDevice: open result is 11, (OK)
    [ 2.299] ukiOpenByBusid: ukiOpenMinor returns 11
    [ 2.299] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
    [ 2.299] (**) fglrx(0): NoAccel = NO
    [ 2.299] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
    [ 2.299] (--) fglrx(0): Chipset: "AMD Radeon HD 7800 Series " (Chipset = 0x6819)
    [ 2.299] (--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x2730)
    [ 2.299] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
    [ 2.299] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
    [ 2.299] (--) fglrx(0): MMIO registers at 0xf7c00000
    [ 2.299] (--) fglrx(0): I/O port at 0x0000c000
    [ 2.299] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [ 2.300] (II) fglrx(0): AC Adapter is used
    [ 2.303] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    [ 2.303] (II) Loading sub module "vbe"
    [ 2.303] (II) LoadModule: "vbe"
    [ 2.303] (II) Loading /usr/lib/xorg/modules/libvbe.so
    [ 2.304] (II) Module vbe: vendor="X.Org Foundation"
    [ 2.304] compiled for 1.12.4, module version = 1.1.0
    [ 2.304] ABI class: X.Org Video Driver, version 12.1
    [ 2.304] (II) fglrx(0): VESA BIOS detected
    [ 2.304] (II) fglrx(0): VESA VBE Version 3.0
    [ 2.304] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    [ 2.304] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
    [ 2.304] (II) fglrx(0): VESA VBE OEM Software Rev: 15.17
    [ 2.304] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
    [ 2.304] (II) fglrx(0): VESA VBE OEM Product: PITCAIRN
    [ 2.304] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    [ 2.309] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
    [ 2.309] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
    [ 2.309] (II) fglrx(0): PCIE card detected
    [ 2.309] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    [ 2.309] (WW) fglrx(0): board is an unknown third party board, chipset is supported
    [ 2.311] (II) fglrx(0): Using adapter: 6:0.0.
    [ 2.320] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
    [ 2.458] (II) fglrx(0): Interrupt handler installed at IRQ 48.
    [ 2.458] (II) fglrx(0): RandR 1.2 support is enabled!
    [ 2.458] (II) fglrx(0): RandR 1.2 rotation support is enabled!
    [ 2.458] (==) fglrx(0): Center Mode is disabled
    [ 2.458] (II) Loading sub module "fb"
    [ 2.458] (II) LoadModule: "fb"
    [ 2.458] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 2.461] (II) Module fb: vendor="X.Org Foundation"
    [ 2.461] compiled for 1.12.4, module version = 1.0.0
    [ 2.461] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2.461] (II) Loading sub module "ddc"
    [ 2.461] (II) LoadModule: "ddc"
    [ 2.461] (II) Module "ddc" already built-in
    [ 2.571] (II) fglrx(0): Finished Initialize PPLIB!
    [ 2.577] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
    [ 2.577] (II) fglrx(0): Output DFP2 has no monitor section
    [ 2.577] (II) fglrx(0): Output DFP3 has no monitor section
    [ 2.577] (II) fglrx(0): Output DFP4 has no monitor section
    [ 2.577] (II) fglrx(0): Output DFP5 has no monitor section
    [ 2.577] (II) fglrx(0): Output DFP6 has no monitor section
    [ 2.577] (II) fglrx(0): Output DFP7 has no monitor section
    [ 2.577] (II) fglrx(0): Output DFP8 has no monitor section
    [ 2.577] (II) fglrx(0): Output DFP9 has no monitor section
    [ 2.577] (II) fglrx(0): Output DFP10 has no monitor section
    [ 2.577] (II) fglrx(0): Output CRT1 has no monitor section
    [ 2.578] (II) Loading sub module "ddc"
    [ 2.578] (II) LoadModule: "ddc"
    [ 2.578] (II) Module "ddc" already built-in
    [ 2.578] (II) fglrx(0): Connected Display0: DFP10
    [ 2.578] (II) fglrx(0): Display0 EDID data ---------------------------
    [ 2.578] (II) fglrx(0): Manufacturer: SAM Model: 524 Serial#: 1280455218
    [ 2.578] (II) fglrx(0): Year: 2009 Week: 20
    [ 2.578] (II) fglrx(0): EDID Version: 1.3
    [ 2.578] (II) fglrx(0): Digital Display Input
    [ 2.578] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
    [ 2.578] (II) fglrx(0): Gamma: 2.20
    [ 2.578] (II) fglrx(0): DPMS capabilities: Off
    [ 2.578] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 2.578] (II) fglrx(0): First detailed timing is preferred mode
    [ 2.578] (II) fglrx(0): redX: 0.648 redY: 0.339 greenX: 0.143 greenY: 0.070
    [ 2.578] (II) fglrx(0): blueX: 0.282 blueY: 0.603 whiteX: 0.312 whiteY: 0.329
    [ 2.578] (II) fglrx(0): Supported established timings:
    [ 2.578] (II) fglrx(0): 640x480@60Hz
    [ 2.578] (II) fglrx(0): 800x600@56Hz
    [ 2.578] (II) fglrx(0): 800x600@60Hz
    [ 2.578] (II) fglrx(0): 1024x768@60Hz
    [ 2.578] (II) fglrx(0): Manufacturer's mask: 0
    [ 2.578] (II) fglrx(0): Supported standard timings:
    [ 2.578] (II) fglrx(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 2.578] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 2.578] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 2.578] (II) fglrx(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 2.578] (II) fglrx(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
    [ 2.578] (II) fglrx(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 2.578] (II) fglrx(0): Supported detailed timing:
    [ 2.578] (II) fglrx(0): clock: 148.5 MHz Image Size: 477 x 268 mm
    [ 2.578] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 2.578] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 2.578] (II) fglrx(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
    [ 2.578] (II) fglrx(0): Monitor name: SyncMaster
    [ 2.578] (II) fglrx(0): Serial No: HMBS500385
    [ 2.578] (II) fglrx(0): Supported detailed timing:
    [ 2.578] (II) fglrx(0): clock: 148.5 MHz Image Size: 477 x 268 mm
    [ 2.578] (II) fglrx(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
    [ 2.578] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 2.578] (II) fglrx(0): Supported detailed timing:
    [ 2.578] (II) fglrx(0): clock: 74.2 MHz Image Size: 477 x 268 mm
    [ 2.578] (II) fglrx(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
    [ 2.578] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 2.578] (II) fglrx(0): Supported detailed timing:
    [ 2.578] (II) fglrx(0): clock: 74.2 MHz Image Size: 477 x 268 mm
    [ 2.578] (II) fglrx(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
    [ 2.578] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 2.578] (II) fglrx(0): Supported detailed timing:
    [ 2.578] (II) fglrx(0): clock: 27.0 MHz Image Size: 477 x 268 mm
    [ 2.578] (II) fglrx(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
    [ 2.578] (II) fglrx(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
    [ 2.578] (II) fglrx(0): Supported detailed timing:
    [ 2.578] (II) fglrx(0): clock: 27.0 MHz Image Size: 477 x 268 mm
    [ 2.578] (II) fglrx(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
    [ 2.578] (II) fglrx(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
    [ 2.578] (II) fglrx(0): Number of EDID sections to follow: 1
    [ 2.578] (II) fglrx(0): EDID (in hex):
    [ 2.578] (II) fglrx(0): 00ffffffffffff004c2d24053232524c
    [ 2.578] (II) fglrx(0): 1413010380301b782a3851a656241248
    [ 2.578] (II) fglrx(0): 9a50542308008100814081809500a940
    [ 2.578] (II) fglrx(0): b30001010101023a801871382d40582c
    [ 2.578] (II) fglrx(0): 4500dd0c1100001e000000fd00383c1e
    [ 2.578] (II) fglrx(0): 5111000a202020202020000000fc0053
    [ 2.578] (II) fglrx(0): 796e634d61737465720a2020000000ff
    [ 2.578] (II) fglrx(0): 00484d42533530303338350a20200168
    [ 2.578] (II) fglrx(0): End of Display0 EDID data --------------------
    [ 2.578] (II) fglrx(0): EDID for output DFP1
    [ 2.578] (II) fglrx(0): EDID for output DFP2
    [ 2.578] (II) fglrx(0): EDID for output DFP3
    [ 2.578] (II) fglrx(0): EDID for output DFP4
    [ 2.578] (II) fglrx(0): EDID for output DFP5
    [ 2.578] (II) fglrx(0): EDID for output DFP6
    [ 2.578] (II) fglrx(0): EDID for output DFP7
    [ 2.578] (II) fglrx(0): EDID for output DFP8
    [ 2.578] (II) fglrx(0): EDID for output DFP9
    [ 2.578] (II) fglrx(0): EDID for output DFP10
    [ 2.578] (II) fglrx(0): Manufacturer: SAM Model: 524 Serial#: 1280455218
    [ 2.578] (II) fglrx(0): Year: 2009 Week: 20
    [ 2.578] (II) fglrx(0): EDID Version: 1.3
    [ 2.578] (II) fglrx(0): Digital Display Input
    [ 2.578] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
    [ 2.578] (II) fglrx(0): Gamma: 2.20
    [ 2.578] (II) fglrx(0): DPMS capabilities: Off
    [ 2.578] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 2.578] (II) fglrx(0): First detailed timing is preferred mode
    [ 2.578] (II) fglrx(0): redX: 0.648 redY: 0.339 greenX: 0.143 greenY: 0.070
    [ 2.578] (II) fglrx(0): blueX: 0.282 blueY: 0.603 whiteX: 0.312 whiteY: 0.329
    [ 2.578] (II) fglrx(0): Supported established timings:
    [ 2.578] (II) fglrx(0): 640x480@60Hz
    [ 2.578] (II) fglrx(0): 800x600@56Hz
    [ 2.578] (II) fglrx(0): 800x600@60Hz
    [ 2.578] (II) fglrx(0): 1024x768@60Hz
    [ 2.578] (II) fglrx(0): Manufacturer's mask: 0
    [ 2.578] (II) fglrx(0): Supported standard timings:
    [ 2.578] (II) fglrx(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 2.578] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 2.578] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 2.578] (II) fglrx(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 2.578] (II) fglrx(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
    [ 2.578] (II) fglrx(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 2.578] (II) fglrx(0): Supported detailed timing:
    [ 2.578] (II) fglrx(0): clock: 148.5 MHz Image Size: 477 x 268 mm
    [ 2.578] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 2.578] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 2.578] (II) fglrx(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
    [ 2.578] (II) fglrx(0): Monitor name: SyncMaster
    [ 2.578] (II) fglrx(0): Serial No: HMBS500385
    [ 2.578] (II) fglrx(0): Supported detailed timing:
    [ 2.578] (II) fglrx(0): clock: 148.5 MHz Image Size: 477 x 268 mm
    [ 2.578] (II) fglrx(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
    [ 2.578] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 2.578] (II) fglrx(0): Supported detailed timing:
    [ 2.578] (II) fglrx(0): clock: 74.2 MHz Image Size: 477 x 268 mm
    [ 2.578] (II) fglrx(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
    [ 2.578] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 2.578] (II) fglrx(0): Supported detailed timing:
    [ 2.578] (II) fglrx(0): clock: 74.2 MHz Image Size: 477 x 268 mm
    [ 2.578] (II) fglrx(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
    [ 2.578] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 2.578] (II) fglrx(0): Supported detailed timing:
    [ 2.578] (II) fglrx(0): clock: 27.0 MHz Image Size: 477 x 268 mm
    [ 2.578] (II) fglrx(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
    [ 2.578] (II) fglrx(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
    [ 2.578] (II) fglrx(0): Supported detailed timing:
    [ 2.578] (II) fglrx(0): clock: 27.0 MHz Image Size: 477 x 268 mm
    [ 2.578] (II) fglrx(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
    [ 2.578] (II) fglrx(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
    [ 2.578] (II) fglrx(0): Number of EDID sections to follow: 1
    [ 2.578] (II) fglrx(0): EDID (in hex):
    [ 2.578] (II) fglrx(0): 00ffffffffffff004c2d24053232524c
    [ 2.578] (II) fglrx(0): 1413010380301b782a3851a656241248
    [ 2.578] (II) fglrx(0): 9a50542308008100814081809500a940
    [ 2.578] (II) fglrx(0): b30001010101023a801871382d40582c
    [ 2.578] (II) fglrx(0): 4500dd0c1100001e000000fd00383c1e
    [ 2.578] (II) fglrx(0): 5111000a202020202020000000fc0053
    [ 2.578] (II) fglrx(0): 796e634d61737465720a2020000000ff
    [ 2.578] (II) fglrx(0): 00484d42533530303338350a20200168
    [ 2.579] (II) fglrx(0): Printing probed modes for output DFP10
    [ 2.579] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1776x1000"x50.0 148.50 1776 2304 2348 2640 1000 1004 1009 1125 +hsync +vsync (56.2 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1680x1050"x50.0 148.50 1680 2448 2492 2640 1050 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1400x1050"x60.0 162.00 1400 1664 1856 2160 1050 1201 1204 1250 +hsync +vsync (75.0 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1400x1050"x50.0 148.50 1400 2448 2492 2640 1050 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1600x900"x60.0 162.00 1600 1664 1856 2160 900 1201 1204 1250 +hsync +vsync (75.0 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1600x900"x50.0 148.50 1600 2448 2492 2640 900 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1280x1024"x50.0 148.50 1280 2448 2492 2640 1024 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1440x900"x50.0 148.50 1440 2448 2492 2640 900 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1280x960"x50.0 148.50 1280 2448 2492 2640 960 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1280x800"x50.0 148.50 1280 2448 2492 2640 800 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1280x800"x60.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1280x768"x50.0 148.50 1280 2448 2492 2640 768 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1280x768"x60.0 83.50 1280 1352 1480 1680 768 803 809 831 -hsync +vsync (49.7 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1024x768"x50.0 148.50 1024 2448 2492 2640 768 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 2.579] (II) fglrx(0): Modeline "1152x648"x50.0 74.25 1152 1592 1632 1980 648 653 658 750 +hsync +vsync (37.5 kHz)
    [ 2.579] (II) fglrx(0): Modeline "800x600"x50.0 148.50 800 2448 2492 2640 600 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [ 2.579] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 2.579] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 2.579] (II) fglrx(0): Modeline "720x576"x60.0 148.50 720 2008 2052 2200 576 1084 1089 1125 +hsync +vsync (67.5 kHz)
    [ 2.579] (II) fglrx(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz)
    [ 2.579] (II) fglrx(0): Modeline "720x480"x50.0 148.50 720 2448 2492 2640 480 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [ 2.579] (II) fglrx(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
    [ 2.579] (II) fglrx(0): Modeline "640x480"x50.0 148.50 640 2448 2492 2640 480 1084 1089 1125 +hsync +vsync (56.2 kHz)
    [ 2.579] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 2.579] (II) fglrx(0): EDID for output CRT1
    [ 2.579] (II) fglrx(0): Output DFP1 disconnected
    [ 2.579] (II) fglrx(0): Output DFP2 disconnected
    [ 2.579] (II) fglrx(0): Output DFP3 disconnected
    [ 2.579] (II) fglrx(0): Output DFP4 disconnected
    [ 2.579] (II) fglrx(0): Output DFP5 disconnected
    [ 2.579] (II) fglrx(0): Output DFP6 disconnected
    [ 2.579] (II) fglrx(0): Output DFP7 disconnected
    [ 2.579] (II) fglrx(0): Output DFP8 disconnected
    [ 2.579] (II) fglrx(0): Output DFP9 disconnected
    [ 2.579] (II) fglrx(0): Output DFP10 connected
    [ 2.579] (II) fglrx(0): Output CRT1 disconnected
    [ 2.579] (II) fglrx(0): Using exact sizes for initial modes
    [ 2.579] (II) fglrx(0): Output DFP10 using initial mode 1920x1080
    [ 2.579] (II) fglrx(0): DPI set to (96, 96)
    [ 2.579] (II) fglrx(0): Eyefinity capable adapter detected.
    [ 2.579] (II) fglrx(0): Adapter AMD Radeon HD 7800 Series has 6 configurable heads and 1 displays connected.
    [ 2.579] (==) fglrx(0): PseudoColor visuals disabled
    [ 2.579] (II) Loading sub module "ramdac"
    [ 2.579] (II) LoadModule: "ramdac"
    [ 2.579] (II) Module "ramdac" already built-in
    [ 2.579] (==) fglrx(0): NoDRI = NO
    [ 2.579] (==) fglrx(0): Capabilities: 0x00000000
    [ 2.579] (==) fglrx(0): CapabilitiesEx: 0x00000000
    [ 2.579] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    [ 2.579] (==) fglrx(0): UseFastTLS=0
    [ 2.579] (II) fglrx(0): Desktop Vsync is enabled.
    [ 2.579] (--) Depth 24 pixmap format is 32 bpp
    [ 2.579] (II) Loading extension ATIFGLRXDRI
    [ 2.579] (II) fglrx(0): doing swlDriScreenInit
    [ 2.579] (II) fglrx(0): swlDriScreenInit for fglrx driver
    [ 2.579] ukiDynamicMajor: found major device number 251
    [ 2.579] ukiDynamicMajor: found major device number 251
    [ 2.579] ukiDynamicMajor: found major device number 251
    [ 2.579] ukiOpenByBusid: Searching for BusID PCI:6:0:0
    [ 2.579] ukiOpenDevice: node name is /dev/ati/card0
    [ 2.579] ukiOpenDevice: open result is 12, (OK)
    [ 2.579] ukiOpenByBusid: ukiOpenMinor returns 12
    [ 2.579] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
    [ 2.579] (II) fglrx(0): [uki] DRM interface version 1.0
    [ 2.579] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:6:0:0"
    [ 2.579] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
    [ 2.579] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f1426d74000
    [ 2.579] (II) fglrx(0): [uki] framebuffer handle = 0x3000
    [ 2.579] (II) fglrx(0): [uki] added 1 reserved context for kernel
    [ 2.579] (II) fglrx(0): swlDriScreenInit done
    [ 2.579] (II) fglrx(0): Kernel Module Version Information:
    [ 2.579] (II) fglrx(0): Name: fglrx
    [ 2.579] (II) fglrx(0): Version: 8.98.2
    [ 2.579] (II) fglrx(0): Date: Jul 27 2012
    [ 2.579] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
    [ 2.579] (II) fglrx(0): Kernel Module version matches driver.
    [ 2.579] (II) fglrx(0): Kernel Module Build Time Information:
    [ 2.579] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.5.3-1-ARCH
    [ 2.579] (II) fglrx(0): Build-Kernel MODVERSIONS: no
    [ 2.579] (II) fglrx(0): Build-Kernel __SMP__: no
    [ 2.579] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    [ 2.579] (II) fglrx(0): [uki] register handle = 0x00004000
    [ 2.589] (II) fglrx(0): DRI initialization successfull
    [ 2.590] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x010e0000
    [ 2.591] (==) fglrx(0): Backing store disabled
    [ 2.591] (II) Loading extension FGLRXEXTENSION
    [ 2.591] (**) fglrx(0): DPMS enabled
    [ 2.591] (II) fglrx(0): Initialized in-driver Xinerama extension
    [ 2.591] (**) fglrx(0): Textured Video is enabled.
    [ 2.591] (II) LoadModule: "glesx"
    [ 2.591] (II) Loading /usr/lib/xorg/modules/glesx.so
    [ 2.601] (II) Module glesx: vendor="X.Org Foundation"
    [ 2.601] compiled for 1.4.99.906, module version = 1.0.0
    [ 2.601] (II) Loading extension GLESX
    [ 2.601] (II) fglrx(0): GLESX enableFlags = 592
    [ 2.602] (II) fglrx(0): GLESX is enabled
    [ 2.602] (II) LoadModule: "amdxmm"
    [ 2.602] (II) Loading /usr/lib/xorg/modules/amdxmm.so
    [ 2.603] (II) Module amdxmm: vendor="X.Org Foundation"
    [ 2.603] compiled for 1.4.99.906, module version = 2.0.0
    [ 2.615] (II) Loading extension AMDXVOPL
    [ 2.615] (II) Loading extension AMDXVBA
    [ 2.617] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
    [ 2.618] (II) fglrx(0): Enable composite support successfully
    [ 2.618] (WW) fglrx(0): Option "VendorName" is not used
    [ 2.618] (WW) fglrx(0): Option "ModelName" is not used
    [ 2.618] (II) fglrx(0): X context handle = 0x1
    [ 2.618] (II) fglrx(0): [DRI] installation complete
    [ 2.618] (==) fglrx(0): Silken mouse enabled
    [ 2.618] (==) fglrx(0): Using HW cursor of display infrastructure!
    [ 2.618] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
    [ 2.735] (II) fglrx(0): Framebuffer compression enabled: mcAddr=0xf407a40000 width=0xa00 height=0x3267
    [ 2.735] (--) RandR disabled
    [ 2.735] (II) Initializing built-in extension Generic Event Extension
    [ 2.735] (II) Initializing built-in extension SHAPE
    [ 2.735] (II) Initializing built-in extension MIT-SHM
    [ 2.735] (II) Initializing built-in extension XInputExtension
    [ 2.735] (II) Initializing built-in extension XTEST
    [ 2.735] (II) Initializing built-in extension BIG-REQUESTS
    [ 2.735] (II) Initializing built-in extension SYNC
    [ 2.735] (II) Initializing built-in extension XKEYBOARD
    [ 2.735] (II) Initializing built-in extension XC-MISC
    [ 2.735] (II) Initializing built-in extension SECURITY
    [ 2.735] (II) Initializing built-in extension XINERAMA
    [ 2.735] (II) Initializing built-in extension XFIXES
    [ 2.735] (II) Initializing built-in extension RENDER
    [ 2.735] (II) Initializing built-in extension RANDR
    [ 2.735] (II) Initializing built-in extension COMPOSITE
    [ 2.735] (II) Initializing built-in extension DAMAGE
    [ 2.736] ukiDynamicMajor: found major device number 251
    [ 2.736] ukiDynamicMajor: found major device number 251
    [ 2.736] ukiOpenByBusid: Searching for BusID PCI:6:0:0
    [ 2.736] ukiOpenDevice: node name is /dev/ati/card0
    [ 2.736] ukiOpenDevice: open result is 13, (OK)
    [ 2.736] ukiOpenByBusid: ukiOpenMinor returns 13
    [ 2.736] ukiOpenByBusid: ukiGetBusid reports PCI:6:0:0
    [ 2.842] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
    [ 2.857] (II) fglrx(0): Enable the clock gating!
    [ 2.872] (II) fglrx(0): Desktop Vsync is enabled.
    [ 2.872] (II) fglrx(0): Setting screen physical size to 508 x 285
    [ 2.901] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 2.901] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2.901] (II) LoadModule: "evdev"
    [ 2.901] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2.902] (II) Module evdev: vendor="X.Org Foundation"
    [ 2.902] compiled for 1.12.3.901, module version = 2.7.3
    [ 2.902] Module class: X.Org XInput Driver
    [ 2.902] ABI class: X.Org XInput driver, version 16.0
    [ 2.902] (II) Using input driver 'evdev' for 'Power Button'
    [ 2.902] (**) Power Button: always reports core events
    [ 2.902] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 2.902] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2.902] (--) evdev: Power Button: Found keys
    [ 2.902] (II) evdev: Power Button: Configuring as keyboard
    [ 2.902] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
    [ 2.902] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 2.902] (**) Option "xkb_rules" "evdev"
    [ 2.902] (**) Option "xkb_model" "evdev"
    [ 2.902] (**) Option "xkb_layout" "us"
    [ 2.902] (**) Option "xkb_variant" "dvp"
    [ 2.913] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 2.913] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2.913] (II) Using input driver 'evdev' for 'Power Button'
    [ 2.913] (**) Power Button: always reports core events
    [ 2.913] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 2.913] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2.913] (--) evdev: Power Button: Found keys
    [ 2.913] (II) evdev: Power Button: Configuring as keyboard
    [ 2.913] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
    [ 2.913] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 2.913] (**) Option "xkb_rules" "evdev"
    [ 2.913] (**) Option "xkb_model" "evdev"
    [ 2.913] (**) Option "xkb_layout" "us"
    [ 2.913] (**) Option "xkb_variant" "dvp"
    [ 2.913] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event14)
    [ 2.913] (II) No input driver specified, ignoring this device.
    [ 2.913] (II) This device may have been added with another device file.
    [ 2.913] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event15)
    [ 2.913] (II) No input driver specified, ignoring this device.
    [ 2.913] (II) This device may have been added with another device file.
    [ 2.913] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event16)
    [ 2.913] (II) No input driver specified, ignoring this device.
    [ 2.913] (II) This device may have been added with another device file.
    [ 2.913] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event17)
    [ 2.913] (II) No input driver specified, ignoring this device.
    [ 2.913] (II) This device may have been added with another device file.
    [ 2.913] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event18)
    [ 2.913] (II) No input driver specified, ignoring this device.
    [ 2.913] (II) This device may have been added with another device file.
    [ 2.913] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event19)
    [ 2.914] (II) No input driver specified, ignoring this device.
    [ 2.914] (II) This device may have been added with another device file.
    [ 2.914] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event10)
    [ 2.914] (II) No input driver specified, ignoring this device.
    [ 2.914] (II) This device may have been added with another device file.
    [ 2.914] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
    [ 2.914] (II) No input driver specified, ignoring this device.
    [ 2.914] (II) This device may have been added with another device file.
    [ 2.914] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event4)
    [ 2.914] (II) No input driver specified, ignoring this device.
    [ 2.914] (II) This device may have been added with another device file.
    [ 2.914] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event5)
    [ 2.914] (II) No input driver specified, ignoring this device.
    [ 2.914] (II) This device may have been added with another device file.
    [ 2.914] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event6)
    [ 2.914] (II) No input driver specified, ignoring this device.
    [ 2.914] (II) This device may have been added with another device file.
    [ 2.914] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event7)
    [ 2.914] (II) No input driver specified, ignoring this device.
    [ 2.914] (II) This device may have been added with another device file.
    [ 2.914] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event8)
    [ 2.914] (II) No input driver specified, ignoring this device.
    [ 2.914] (II) This device may have been added with another device file.
    [ 2.914] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event9)
    [ 2.914] (II) No input driver specified, ignoring this device.
    [ 2.914] (II) This device may have been added with another device file.
    [ 2.914] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event12)
    [ 2.914] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 2.914] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 2.914] (**) Logitech USB Receiver: always reports core events
    [ 2.914] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event12"
    [ 2.914] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
    [ 2.914] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
    [ 2.914] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 2.914] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 2.914] (--) evdev: Logitech USB Receiver: Found x and y relative axes
    [ 2.914] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 2.914] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 2.914] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 2.914] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2.914] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7:1.0/input/input12/event12"
    [ 2.914] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
    [ 2.914] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 2.915] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 2.915] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 2.915] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 2.915] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 2.915] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 2.915] (II) No input driver specified, ignoring this device.
    [ 2.915] (II) This device may have been added with another device file.
    [ 2.915] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event13)
    [ 2.915] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 2.915] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 2.915] (**) Logitech USB Receiver: always reports core events
    [ 2.915] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event13"
    [ 2.915] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
    [ 2.915] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
    [ 2.915] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 2.915] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 2.915] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
    [ 2.915] (--) evdev: Logitech USB Receiver: Found absolute axes
    [ 2.915] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
    [ 2.915] (--) evdev: Logitech USB Receiver: Found keys
    [ 2.915] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 2.915] (II) evdev: Logitech USB Receiver: Configuring as keyboard
    [ 2.915] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 2.915] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 2.915] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2.915] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7:1.1/input/input13/event13"
    [ 2.915] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
    [ 2.915] (**) Option "xkb_rules" "evdev"
    [ 2.915] (**) Option "xkb_model" "evdev"
    [ 2.915] (**) Option "xkb_layout" "us"
    [ 2.915] (**) Option "xkb_variant" "dvp"
    [ 2.915] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 2.915] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
    [ 2.915] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 2.915] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 2.915] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 2.915] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 2.915] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2.915] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2.915] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 2.915] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2.915] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2.915] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 2.915] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 2.915] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2.915] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2.915] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
    [ 2.915] (**) Option "xkb_rules" "evdev"
    [ 2.915] (**) Option "xkb_model" "evdev"
    [ 2.915] (**) Option "xkb_layout" "us"
    [ 2.915] (**) Option "xkb_variant" "dvp"
    [ 2.915] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 2.915] (II) No input driver specified, ignoring this device.
    [ 2.915] (II) This device may have been added with another device file.
    [ 2.917] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
    [ 7.513] (II) fglrx(0): EDID vendor "SAM", prod id 1316
    [ 7.513] (II) fglrx(0): Using EDID range info for horizontal sync
    [ 7.513] (II) fglrx(0): Using EDID range info for vertical refresh
    [ 7.513] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 7.513] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 7.513] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 7.513] (II) fglrx(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 7.513] (II) fglrx(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 7.513] (II) fglrx(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 7.513] (II) fglrx(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 7.513] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 7.513] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 7.513] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 7.513] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 7.513] (II) fglrx(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 7.513] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 7.513] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 7.513] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 7.513] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 7.513] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 10.738] (II) fglrx(0): EDID vendor "SAM", prod id 1316
    [ 10.738] (II) fglrx(0): Using hsync ranges from config file
    [ 10.738] (II) fglrx(0): Using vrefresh ranges from config file
    [ 10.738] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 10.738] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 10.738] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 10.738] (II) fglrx(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 10.738] (II) fglrx(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 10.738] (II) fglrx(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 10.738] (II) fglrx(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 10.738] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 10.738] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 10.738] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 10.738] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 10.738] (II) fglrx(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 10.738] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 10.738] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 10.738] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 10.738] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 10.738] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    Here's the Xorg.conf:
    Section "ServerLayout"
    Identifier "aticonfig Layout"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    EndSection
    Section "Module"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    BusID "PCI:6:0:0"
    Option "OpenGLOverlay" "0"
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Setting the PCI BusID in Xorg.conf seems to have no effect, even if I set it to 6:0:0 or 7:0:0, its still the same.
    Do I need to set AutoAddDevices off?

    MisterAnderson wrote:Does the same happen with the opensource radeon drivers? (xf86-video-ati)
    Thanks for the reply!
    The open source driver doesn't support my card yet. I tried installing it first since its the recommended driver, but Xorg couldn't detect any display at all.
    It seems the PCI BusID is not being read from the xorg.conf file. There's auto detection everytime the PC boots.
    Last edited by hdhiman (2012-10-04 00:43:52)

  • Graphics Card Not Working In My HP Pavilion g4 1314tx Laptop

    Hi,
    My Hp Pavilion G4 1314 tx Laptop is not starting up .When I asked hp store people they said graphics card has to be replaced.My graphics card is 
                             AMD Radeon HD 7450M (1 GB DDR3 dedicated)
    I'm in India but not able to find the above graphics card to buy .Can anyone help me to get this card and also the place where I can give my laptop to service.My place is chennai
    Is support there for this model .I Bought from Malaysia.

    Hi:
    The only way to replace the graphics adapter is to replace the entire motherboard.
    Since I live in the middle of the United States, I do not know where you can take your notebook to get the motherboard replaced.

Maybe you are looking for

  • How can I get my Hp printer to download?

    How can I get my HP F380 printer to download?

  • Ibook G4 will not boot up

    Help- My ibook G4 will not boot up. When I Turn the computer on the apple symbol shows up and the clock continues to spin. I tried to start it up from the disk and at first I could select my hard drive, but then the start up failed. When I tried to s

  • Apple TV is locked up

    My Apple TV is locked on the home screen. Can't restart.  How do you turn it off with remote

  • What are the *.mnu files that download with the Hewlett Packer instrument drivers?

    I have a  rather odd problem.  I ran a program on another machine and all works fine, but ported it to a vendor site and have only one issue that I can't seem to resolve.  I'm talking to several HP6632A DC Power Supplies, an HP 34401A and an HP8720C.

  • Printing in Mail Cutting last line on page in half

    I have a friend, using a Macbook Pro 15", who has noticed since the last upgrade to 10.9.4 that whenever he prints a multi page document in OS X mail that the last line on the page prints half on one page and half on the next.  Default paper size is