Graphics card (PLEASE REPLY QUICKLY)

I have a hp pavilion dv6680et. specs:
core 2 duo t7700
2 gb ram
geforce 8400m gs
250 gb hard drive
so my problem is with my graphics card is really bad and i want to change it i can buy all type of cards. Can i change and if i can change how can i?????

Hi:
There are no graphics "cards" in your notebook.
The GPU is soldered to the motherboard.
You have the best graphics HP installed in that model series, so there aren't even any motherboards with better graphics you can switch to.

Similar Messages

Hp pavilion p7-1410 graphics card "please help"

Hello I own a HP Pavilion p7-1410 and only upgraded the power supply to a 550wat and was wondering what type of graphics card I can get that will work in my pc, I have tried a used nvidia gtx 560 ti -> it only lasted a few weeks till the screen changed a bunch of colors then stayed black and didnt work in my other pc. Could it be the card its self or can my pc not handle this card and or where would be a good place to start looking for cards for this computer?
If this is in the wrong section I'm sorry im new to this.
This question was solved.
View Solution.

SamMaxwel wrote:
Hello I own a HP Pavilion p7-1410 and only upgraded the power supply to a 550wat and was wondering what type of graphics card I can get that will work in my pc, I have tried a used nvidia gtx 560 ti -> it only lasted a few weeks till the screen changed a bunch of colors then stayed black and didnt work in my other pc. Could it be the card its self or can my pc not handle this card and or where would be a good place to start looking for cards for this computer?
If this is in the wrong section I'm sorry im new to this.
If the card did not work in another PC, especially if the other PC had a PSU >=500 Watts and both PCIe power connectors were connected, then the card itself is likely to have issues.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Need to Upgrade my Graphics Card - Please Help

Hello
Just recently purchased a HP and everything is great EXCEPT the Graphics Card cannot handle games like Battlefield 4.
Not sure what my options are. Can anyone please advise?
My computer is HP Pavilion, System Model 500-214
Windows 8.1
Graphics Card currently is AMD Radeon HD 8570D
Resolution 1680 x 1050 (60hz)
It's a 1 terabite
Not sure what else you would need to know.
Thank you!

Hi,
You will need a graphics card in the range of this NVIDIA GTX 660. Additionally you need to replace the 300 watt power supply with a 500+ watt power supply such as this Corsair CX600 which is on sale for $45 after rebate.
These HP How-toshould be helpful.
Computer Does not Start After Installing a Video Card (Windows 8)
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Problem with MSI GTX 960 GAMAING 4G graphics card - Please help

So I just bought an MSI GTX 960 GAMING 4G graphics card. My problem is that it seems to randomly decide when it wants to run fine at 1215 MHz, and when it wants to downclock to around 135 MHz. Today for example, I was playing Witcher 3: Game was running fine (~55 FPS) for a few hours because the card was performing at maximum. Then, out of nowehere, I dropped to about 4 FPS. I checked Afterburner, and the core clock went down to 135 MHz, while I was still in game. The card is not overheating during gaming. I have the fans set to 35% speed at all times and the GPU never got hotter than about 50c.
I have the latest nVidia drivers installed. I even tried an earlier set of nVidia drivers and the same things happened. Also yes, it is firmly seated in the PCI-E slot and yes, the power cable is firmly plugged in.
PC Specs:
Intel Core i5 Devils Canyon
Gigabyte GA-Z97N-WIFI mobo
GSkill Sniper 16GB RAM
MSI GTX 960 GAMING 4G graphics card
Antec EDGE 550w PSU
I understand these newer graphics cards have power saving settings built in, but I have my nVidia control panel settings to "Prefer maximum performance" and it doesn't seem to help. It seems my card is putting itself into power saver mode at will. I suppose my PSU could be the culprit even though the recommended PSU is only 400w, and I have 550w. Any ideas?

So it turns out I wasn't running the latest BIOS for my motherboard. I updated my BIOS and cleared CMOS. Everything was running fine for a couple hours. I was playing Witcher 3 at full clock and memory speed. GPU temp was hovering around 62 deg c at 60 FPS. Then after a couple hours, the game crashed. Rebooted my computer, and now I am back to the same issue where the card won't run at full speed in a 3D application. Even ran the Valley benchmark tool again and the card didn't increase speed to compensate.
Do I have a defective card? If so I will get it replaced from Newegg.
Also I don't know if I am running the latest vbios. GPU-Z says I have 84.06.14.00.F3
If there is a newer vbios, I can try to update and see if that does anything. I will try anything before returning this to Newegg. My old video card bit the dust and artifacts everywhere, so I don't have a temp replacement.

Please reply quick

I need to change columns of a table into rows. can we make it if so please give a reply

I need to change columns of a table into rows.http://www.dba-oracle.com/t_display_multiple_column_values_same_rows.htm
- Write a PL/SQL function
You can write a PL/SQL function to display multiple rows values on a single line. Martin Chadderton has written a Pl/SQL function called "stragg" that you can define to display multiple SQL rows on one single line. Once defined, you embed the function within your SQL to display your output on a single line:
select stragg(ename) from emp;
Smith, Jones, Baker
- Use the SYS_CONNECT_BY_PATH operator
This article by Younes Naguib describes how to display multiple values from a single column in a single output row. In his example, he displays multiple values of the last name column on a single row. Note his use of the sys_connect_by_path and over operators:
select
deptno,
substr(SYS_CONNECT_BY_PATH(lname, ','),2) name_list
from
select
lname,
deptno,
count(*) OVER ( partition by deptno ) cnt,
ROW_NUMBER () OVER ( partition by deptno order by lname) seq
from
igribun.emp
where
deptno is not null)
where
seq=cnt
start with
seq=1
connect by prior
seq+1=seq
and prior
deptno=deptno;
DEPTNO NAME_LIST
1 Komers,Mokrel,Stenko
2 Hung,Tong
3 Hamer
4 Mansur
- Use a Cross join
Matt contributed this handy SQL techniques to pivot one row of several columns into a single column with several row, using the Oracle cross join syntax. Matt notes that the Cross join "has other uses in conjunction with a WHERE clause to create triangular result sets for rolling totals etc (though thanks to analytic functions those things are very nice and easy)".
SELECT
ite,
case
when ite = 'item1' then item1
when ite = 'item2' then item2
when ite = 'item3' then item3
end as val
FROM
SELECT
pivoter.ite,
item1,
item2,
item3
FROM
someTable
CROSS JOIN
select 'item1' as ite from dual
UNION ALL
select 'item2' as ite from dual
UNION ALL
select 'item3' as ite from dual
)pivoter
- Oracle analytic Lag-Over Function
Analytic functions have a pronounced performance improvement since they avoid an expensive self-join and only make one full-table scan to get the results. This site shows an example of using the Oracle LAG function to display multiple rows on a single column:
SELECT
ename,
hiredate,sal,
LAG (sal, 1, 0)
OVER (ORDER BY hiredate) AS PrevSal
FROM
emp
WHERE
job = 'CLERK';
Ename Hired SAL PREVSAL
SMITH 17-DEC-80 800 0
JAMES 03-DEC-81 950 800
MILLER 23-JAN-82 1300 950
ADAMS 12-JAN-83 1100 1300
Hope this helps. . .
Don Burleson
Oracle Press author

Some help on graphics card please

Hi,
I have a Mac Pro, the ATI HD2600 XT stopped working around six months ago got it replaced by apple under warranty, now it's stopped working again I'm outside of warranty and didn't get apple care as I wasn't too impressed with the service I got last time.
Looked on the apple website and looked at compatible cards,
Found my model number "ATI Radeon HD 2600 XT" and went looking for it.
Couldn't find this anywhere but found losts of vendors selling their own brand of what seemed to be the same chip.
After a brief look trying to work out what the difference in brand was, seemed to point to build quality.
Looked around found a sapphire ATI Radeon HD 2600 XT.
Just tried it and nothing, but it does work with my windows partition. So guessing it's not OS X compatible?
Is there anything I can do Cheers.

There is 1 other thing you can try.
An unknown secret about 2600XT cards is that if there is 1 with EFI for Mac, any number of them can run in OSX off just the one EFI ROM.
So try putting the "dead" Mac 2600 in an unused slot and the Sapphire 2600 in slot 1. If the "dead" mac card runs long enough at boot to load the EFI, you will be able to use the Sapphire in OSX.

How do you get adobe photoshop on a second computer? Please reply quickly!!!!!

How do I get Adobe Photoshop on a second PC when I already have bought it before?

Unless your photos are stored in a Dropbox or other on-line type file site (as well as your computer) you cannot expect to see them on another computer. The same goes for the catalog.

How can I change my security questions but not knowing them please reply burly bought a gift card, How can I change my security questions but not knowing them please reply burly bought a gift card

How can I change my security question but not knowing them please rePly quick burley bought a gift card..

Click here for information. If you can't get the answers emailed to you for some reason(the email may take a few hours to arrive), contact the iTunes Store staff via the link in that article.
(86811)

Problem With Macbook Air 5,1 Graphic Card Driver For Windows 7 - 64 bit

Hello everyone,
I have a macbook air 5,1 , ver 2012-2013
I Installed Windows 7 64bits Ultimate on my macbook, and i downloaded the latest boot camp and i installed it too!
After finish Installing Boot Camp, everything looks fine until it finshes and then i restarted my mac,
Then i found out that my Graphic Card is not working!!,
I Reformated the System 10 times and i tried diffirent versions for example (32 bits) and (home premium) - (Enterprise)
And Still the problem is the same..
It is working perfectly with MAC OSX but on windows it doesn't
I Searched a lot for drivers for intel hd 4000 in intel's website and i downloaded it, but the system is failing when i tried to install a driver from out side boot camp
so i reformat it!,
and now i am working on it without graphic card
Please help!!? any suggestion i would be thankfull <3

Thanks for sharing your tip RatioCynic! That's what this forum is all about!
Happy printing!
Thanks!
Tara
**Although I am an HP employee, I am speaking for myself and not for HP.

Error message: Display performance will be poor due to incorrectly operating graphics card or driver

Greetings:
I've been getting this message lately, using clips of .avi footage from a non-HD Flip Video camcorder. First off, my computer has beyond what I'd need to edit this footage—it's an HP dv 3085dx notebook with 6 gigs of DDR3, Intel Core i7 processor, NVidia GeForce GT230M graphics card. It's a loaded machine. That's not the problem.
The problem is that the red circle with the X in the lower left-hand corner of the screen shows up and gives me this message moments after I start each new project. However, when I click on it, the message is grayed out and it doesn't give me the option of checking the details. Read on to find out how this is affecting my videos....
When I playback unrendered clips, the playback works fine. After rendering, however, the clips play back with jerky glitches and flashes that weren't there during playback of the unrendered footage. I've downloaded the latest driver (195.81), and that hasn't improved anything. Here's a link to a video I posted on YouTube, to illustrate the types of glitches I've been getting: http://www.youtube.com/watch?v=uFeCh6q1JTQ The glitches are particularly apparent during the stretch between 0:20 and 0:28.
I'm still pretty new to this craft (read: I haven't tried other software yet), so any insight into this would be greatly appreciated.
Thanks!
P.S. Might there be some downloadable Premiere Elements software updates that would alleviate the problem?

Thanks for your response. My notebook has a 7200 RPM 500 GB hard drive with about 320 GB free. The .avi files were brought in to PrEl from a WD Passport external drive with about 60 GB (of its 400 GB capacity) free. The project was also being saved to the WD drive.
I have a Windows 7 64-bit system. I have all the latest versions of my NVidia graphics card driver and Quick Time. I also downloaded the PrEl 8.0.1 update from Adobe. Hardware/software-wise, I'm pretty sure I'm in good shape; I'm thinking there might be some settings that I might want to play with.
The camcorder is a very basic Flip Video USB camcorder by Pure Digital Technologies (Model #: F260W). It records in .avi format; when you plug the USB in, you can access an application that allows you to save the videos. I use this to save them to the local drive (C:) and then I copy the .avi files from there to the WD Passport. The Passport drive is where I bring in the media into Premiere Elements, to keep space free for the OS to run smoothly.
The project is set up this preset: NTSC > Hard Disk, Flash Memory Camcorders > Standard 48kHz. As stated earlier, the error message shows up pretty much instantly. To be exact, it shows up about 5-30 seconds after I start a project. Unrendered clip previews playback fine. The raw .avi files also play fine in Windows Media Player. The glitching occurs after clips are rendered.
So, I think that pretty much covers the four steps from the article you linked me to, plus your questions in the above post. There really isn't much of a workflow before the error occurs. I simply drag a clip into the timeline, render it, and the playback gets that splotchy glitching. Now, it could be that the WD external drive doesn't have enough space or speed to run a Premiere Elements project, but if that's the case, why would the error message point to the graphics card?
Thanks again, truly appreciated.

Problem with NEW H520 when installed new power supply & graphic card. Please help!

My H520 was working perfectly and was running FAST..especially when rebooting. ( It was AWESOME! )Then I installed a new power supply (Coolmax 400w) and a new graphic card (Sapphire Radeon HD6450) and then everything changed. Now my computer is booting very SLOWLY and all the programs are taking a long time to load too. I was getting a black screen for almost a full 2 minutes before the windows 8.0 screen would finally load up and then it hangs there for a few seconds and finally goes to the start screen in windows. But BEFORE I installed this new hardware, when I would reboot, I would see the Lenovo splash screen come up for a few short seconds and then it instantly went to the windows welcome screen. And even then I would barely have enough time to see the welcome screen before it instantly loaded into the windows start screen. Everything would load up fast on the desktop too and we'd be good to go. It all took about 30 SECONDS.
But now? It takes MINUTES to get everything going. After it FINALLY loads up (it takes almost 2 full minutes now!), everything hangs up. When you first click on the desktop, it takes a few seconds for all of the icons to pop up. Before I loaded the new hardware, everything loaded up instantly. I didn't even see the icons load because they were already there. But now I have to wait for them to load up before I can even see them. And it's like that with every program and web browser I try to use now. Everything hangs up at first and then finally loads. The programs work but they are sluggish.
So I uninstalled the new power supply and put back in the original 280w power supply and I took out the graphic card but it did no change. The machine is STILL running slow on everything it does and booting very slowly.
I have seen this problem mentioned elsewhere about Lenovo computers but there is never a solution. Please help! It took me a long time to save up for this computer and I have been babying it ever since. I will never be able to afford a new one or pay for tech repair. I need to fix this! I was so thrilled with this computer before the hardware upgrade. This is devastating to me that it is working so poorly now when all I was trying to do was upgrade it a little bit.    Now it's performing horribly and it's only 6 months old.
I ran a four hour test on the hard drive and it is fine. I ran all the system clean ups, optimizations, registry cleanups, windows disk cleaner, defragger and virus scans. Nothing is showing up as not working but there is CLEARLY a problem. It was never this slow.   And why is it STILL acting this slow even after I uninstalled all of the new hardware that made it start acting this way and went back to the original setup?
I'm trying to run a memory test on it now but the BIOS will NOT allow me to select another drive to boot from so I can't boot from the flash drive or CD drive to run the memory test. I have NO IDEA what to do next and I am starting to pull my hair out in frustration.
Please, is there anything that can be done to make it better again?
Any help would be HUGELY appreciated. Thank you!
Sincerely,
Jennifer

I totally give up!! I restored everything to the ORIGINAL state with drivers AND hardware and STILL everything is not working properly like it was BEFORE the upgrade.
So this has been the WORST experience with Tech support EVER!! I have spent DAYS on the phone for HOURS with these technicians and nobody seems to know what they are doing. They put me on hold every 10 minutes and are gone for 10 to 15 minutes and when they come back, they seem all set on a new solution but when you ask them questions about it, they have NO CLUE how to answer and then they put you on hold again. Nothing gets solved and after HOURS on the phone, I just tell them to stop because we are getting no where but running around in circles that make no sense. THIS A NIGHTMARE!!
So I totally gave up on being able to upgrade this machine. To any future buyers, I STRONGLY recommend you do all upgrading BEFORE you get it home for the first time. Make sure you have your power supply and graphic card INCLUDED before you bring it home or you're mostly likely going to have a NIGHTMARE upgrading it later.    Technical support is a HORROR STORY and expect to be WAITING for LOOOOONNNNG periods of time both ON THE PHONE and ONLINE and probably ending up with NO SOLUTION in the end.
I've VERY upset with how this turned out!! I'm just gonna have to deal with the fact that my computer is permenantly messed up and NOBODY AT LENOVO knows how to fix it. So I'm stuck.
I decided to send back the new power supply and the new graphic card because of this nightmare with tech support. I put everything back to the way it was when I bought the computer and it is STILL acting up!! I just want to revert it back to factory settings .. INCLUDING THE BIOS... but Lenovo said I have to send the WHOLE computer back to them to do that. All I can do from home is restore from a point in the hard drive and that's not enough. I need a TOTAL CLEAN INSTALL. Everything needs to be wiped out and reset, not just restored to a previous restore point. I've done this multiple times and all it does is erase all the programs and stuff I put on the computer. The drivers and other codes are still the same. And then bugs come up and things get all wonky. I NEVER HAD THIS PROBLEM BEFORE I TRIED TO UPGRADE IT!!
I am NOT comfortable with Lenovo's "solution". I do NOT want to send my computer back to them for them to reset it with factory disks ESPECIALLY when they stated that they are NOT responsible for any damage in transport or otherwise. I have to buy extra packaging to make sure it gets there safely. They told me to use the original box and packaging, that is the only way they can be sure it will get there safe. Who has the original stuffing SIX MONTHS LATER?!?! I don't want to be sending my computer across the country to get jostled all over the place and have that add to the slowness of the hardware because it was jostled.
Can't I reset it from home? Can they not send ME the disks instead of me sending my whole computer to them?
I'm so incredibly frustrated with this. I hope somebody answers quickly and that I don't have to wait DAYS to get a response again.
I absolutely LOVED my Lenovo computer! And then I tried to upgrade it. BIG MISTAKE!! Now everything is totally messed up and Lenovo's customer support for technical problems is HORRID!!
Somebody please help. This is driving me crazy with frustration and totally breaking my heart. It took me a VERY long time to save up for this computer and it was my most loved possession. It was a reward for a lot of hard times and now it's all broken and acting slow. And it's only 6 months old.
Is there a solution to this very frustrating problem?
I just want it to go back to the way it was before.
And is there a very low cost KNOWN TO WORK WITH THIS MACHINE upgraded graphic card and power supply? Is there a very specific brand and make? If so, could you let me know what it is in case I try to upgrade it again someday?
Thank you for your time and for reading this!
Please have a FANTASTIC day today!!
~Jennifer~

Upgrading my MPB.. Please help me decide with the graphics card

Hi Guys
I have got a late 2007 model MBP Santa Rosa 2.2 Ghz 2 Gb RAM and 128 Mb NVIDIA GeForce 8600M GT video card
I am planning to upgrade my MBP. I just want to know that how is the performance of NVIDIA GeForce 9400M integrated graphics processor 256 Mb compared to my dedicated one. I do normal photo and video editing and DONT play any games at all.. I sometimes feel that my this MBP is a bit laggy when I use photoshop or something.
If the integrated one that is standard on MBP's is quite good to what I generally do (which I have mentioned above), then I wont look into getting the one with dedicated Graphics as I need to save money.
I have tried looking on the internet but I cant find anyone who can give direct comparison between these two in MBP
Please suggest!!!
Thanks heaps!

Hey Singh,
If you're looking for completely anecdotal evidence, I can help with that. I recently purchased the 2.8 GHz 17" MacBook Pro with the dual 9400M (256MB shared/9600GT (512MB dedicated) graphics cards. I user Photoshop and iPhoto a lot, a little iMovie and some Final Cut Pro. I also do quite a bit of video encoding, DVD rips and conversions to iPhone format. I prefer my PS3 for gaming and never do so on the Mac.
What I have noticed is that I can really tell the difference in graphics performance when encoding video and not much any other time. A slight exception is with hardcore Photoshop filters. For those two things I'm glad I can switch to the dedicated 512 card especially when time is a concern. It's also really nice to be able to choose between horsepower and battery life if necessary.
All that being said, if I was getting a 15" MBP I would forgo the extra graphics card and spend the money on more RAM which seems to make a bigger difference in what I do. The 17" did not have an option like that so I have the dual card and a lot of screen real estate. That reminds me, I use the additional 24" LED Cinema display and do not notice any difference when running the extra monitor.
My girlfriend owns the 13" MacBook Pro with the 256MB integrated graphics and iMovie and Photoshop run very nicely and are vastly improved in comparison to her old white MacBook. I have owned the 2007 model MBP Santa Rosa 2.2 Ghz and the new 13" 2.2 6GHz MBP is noticeably quicker in all respects.
In conclusion I would say that the dedicated graphics card is a must for anything in Final Cut Studio (Motion, FCP, DVD Studio Pro) or anything 3D, but for typical Photoshop use, iMovie, etc. you'd be better off with more RAM if you had to choose. If you don't have to pick between the two, get the 512MB card with 8GB of RAM and sleep tight knowing that if your Mac is too slow there's nothing you can do about it hardware wise and you're just too quick
If you're looking for benchmark tests, this article is good http://www.macworld.com/article/141144/2009/06/macbookprobenchmarks.html
Hope that helps!

Please Help with Graphics Card "Bait & Switch"

I ordered a laptop for using as a field monitor and DVR with OnLocation (DV Rack) with the Quadro FX 2500M graphics card. At the last moment the builder says the Quadro is not available (or he can't afford it) and can only offer the NVidia 7950GTX or dual 7950 GTX SLI. Can anyone please help me decide whether or not to accept either one of these alternatives?
Need to make quick decision to accept or cancel so any help much appreciated.

Workstation cards are not really any help to the NLE user. Neither is SLI. I'd say you'll be fine with a single 7950, if you trust the guy enough to buy from him.

Hi,please suggest me some games for Compaq CQ62-105TU Laptop.Can I upgrade my laptop's graphics card

Hi,please suggest me some games for Compaq CQ62-105TU Laptop.Can I upgrade my laptop's graphics card

Unfortunately, you cannot upgrade the processor or graphics card on this laptop.
Here is a page from CPU-World that gives the specs for your processor:
http://www.cpu-world.com/CPUs/Bobcat/AMD-E%20Series%20E2-1800.html
You will see down near the bottom of the page that it is not upgradeable. Some laptops come with the processor soldered to the motherboard. Almost all laptop graphics are this way. The only way that you would be able to get a faster processor/better graphics for this laptop would be to purchase a brand new motherboard. You can do an Ebay search for 'HP G6 motherboard' to see what average prices are if you want to go this route.

I had a 'dead' iMac repaired and it needed a new HDD & graphics card, the repairer installed OSX 10.6.8 and i now need to install other software but I am being asked for 'User' password so I may do this, I've no idea what this will be. Help please.

I had a 'dead' iMac repaired and it needed a new HDD and graphics card, the repairer installed OSX 10.6.8 and i now need to install other software but I am being asked for 'User' password so I may do this, I have no idea what this will be. can anybody help please?
<Personal Information Edited by Host>

On looking at the secure.log on the iMac with OSX10.6.8, I see these entries at each attempt to scp into the iMac:
Dec 29 11:06:20 molika sshd[7248]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Dec 29 11:06:26 molika sshd[7246]: Accepted keyboard-interactive/pam for prowat from 137.110.243.132 port 35571 ssh2
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 created
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 attributes 0x20
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 dead
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Killing auth hosts
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 destroyed
I don't know what to make of this.
Peter R

Graphics card (PLEASE REPLY QUICKLY)

Similar Messages

Maybe you are looking for