Graphics don't run in Reports

Hi,
when i run a report in Developer 2000 v1.32 than contains a graphics display in a client pc, the report generate a error.
Which files should i install in the client machine to run Oracle Graphics displays ?
Thanks.

What error did you get? Please give the original error code and message to help us diagnose the problem.
In order to run OGD, you definitely need Oracle Graphics installed on the same oracle home as reports.
Thanks,
-Shaun

Similar Messages

Reports called forms don't run

Hello,
I have an application on forms6i, the application works fine, except one pc with windows xp, , because, when I tried to run report, the report didn't run. In runtime mode, the form call report with run_product, but don't start reports backgroupd engine, and The form don't response, then I kill the session.
PLease, help me.
Regards,
Diego
Edited by: diegog on 28-abr-2009 10:33

What happend if you run another report using the same module?
It is work?
Try to create a new report without any input parameters and executing it, with a button pressed within your module.
Which version of windows XP, pro or home?
besit regards
Abdel Miranda
AEMS Global GRoup
Panama

Don't have to run the report for no prompt value

Hi,
The requirement is that I need to create a report which is more of a search report kind of thing. So on the dashboard we need to show only prompts. The users would choose any prompt and run the report.....now the issue is....that when no prompt values is selected and user hit the GO button ..i need to show a message saying "Please select any value" ...how to do that ..
I have already refered kishore's blog on guided navigation to implement this ..but the issue which I am facing is that my intermediate report is taking too much time (almost 10 mins) to come back with values and then my actual report shows the message thorugh No results view ...but i need to load the messsage to the dashboard in not more that 1 mins ...how to do that .....
any help would be much appreciated ....
Thanks
Ronny

Thanks Kishore, but I have already refered your blog and implemented this approach as I have mentioned above, however, the issue is that my intermediate report in which I am using the dummy filter is taking too much time to run ...like 10 mins...so guided navigation doesn't work properly ....I have almost 15 prompts so it is taking time ..is there any other work around ?
Thanks,
Ronny

Failure at running the report

i tried to run the report in the web mode .but i have got the message :
failed to locate the browser.
maybe there is sth wrong with rwbeige.css file .
someone help..

Hi Navneet
I saw that you have a lot of experience with oracle reports services
Please If you can give me a little help
I implemented a custom PDS and register in reports builder,
it works fine when I run the report as paper layout but when I try to run it as web layout my reports builder application crashes and disappeared.
Here I am listing my log file :
[2005/8/30 3:57:49:249] Info 56025 (RWServer:startServer): Reports Server is starting up
[2005/8/30 3:57:49:259] Debug 50103 (InProcessServer:Init): Server Config and Trace objects available
[2005/8/30 3:57:49:259] Debug 50103 (WebServerDriver:start): Server Trace Object available
[2005/8/30 3:57:49:480] Debug 50103 (OC4JWebServer:start): webserver_srcroot=E:\DevSuiteHome\reports\docroot WEBSERVER_DOCROOT=c:/docume~1/george~1.pet/locals~1/temp/docroot
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): ALLUSERSPROFILE=C:\Documents and Settings\All Users
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): APPDATA=C:\Documents and Settings\george.petrehus\Application Data
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): CLIENTNAME=Console
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): CommonProgramFiles=C:\Program Files\Common Files
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): COMPUTERNAME=GEORGE-PETREHUS
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): ComSpec=C:\WINDOWS\system32\cmd.exe
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): DXSDK_DIR=C:\Program Files\Microsoft DirectX 9.0 SDK (December 2004)\
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): FP_NO_HOST_CHECK=NO
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): HOMEDRIVE=Z:
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): HOMEPATH=\
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): HOMESHARE=\\cljkit01\home\George.Petrehus
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): INCLUDE=C:\Program Files\Microsoft Visual Studio .NET 2003\SDK\v1.1\include\
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): LIB=C:\Program Files\Microsoft Visual Studio .NET 2003\SDK\v1.1\Lib\
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): LOGONSERVER=\\CLJDC01
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): NUMBER_OF_PROCESSORS=1
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): OS=Windows_NT
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): Path=E:\DevSuiteHome\jdk\jre\bin\classic;E:\DevSuiteHome\jdk\jre\bin;E:\DevSuiteHome\jdk\jre\bin\client;E:\DevSuiteHome\jlib;E:\DevSuiteHome\bin;E:\DevSuiteHome\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\Program Files\NUnit 2.2\bin;C:\Program Files\IDM Computer Solutions\UltraEdit-32;D:\Java\JDeveloper\JDev\jdk\bin;C:\Program Files\CVSNT\
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): PROCESSOR_ARCHITECTURE=x86
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): PROCESSOR_IDENTIFIER=x86 Family 6 Model 10 Stepping 0, AuthenticAMD
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): PROCESSOR_LEVEL=6
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): PROCESSOR_REVISION=0a00
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): ProgramFiles=C:\Program Files
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): REPORTS_CLASSPATH=E:\DevSuiteHome\reports\jlib\rwbuilder.jar;E:\DevSuiteHome\reports\jlib\rwrun.jar;E:\DevSuiteHome\jlib\zrclient.jar;E:\DevSuiteHome\j2ee\home\oc4j.jar;E:\DevSuiteHome\j2ee\home\lib\ojsp.jar;E:\DevSuiteHome\reports\jlib\xrpdsolap.jar;D:\work\SII\Project\ReportsPlugin\Stored Procedure PDS\SPPDS\deploy\sppds.jar
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): SESSIONNAME=Console
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): SystemDrive=C:
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): SystemRoot=C:\WINDOWS
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): TEMP=C:\DOCUME~1\GEORGE~1.PET\LOCALS~1\Temp
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): TMP=C:\DOCUME~1\GEORGE~1.PET\LOCALS~1\Temp
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): USERDNSDOMAIN=NIVISCLUJ.LOCAL
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): USERDOMAIN=NIVISCLUJ
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): USERNAME=george.petrehus
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): USERPROFILE=C:\Documents and Settings\george.petrehus
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): VS71COMNTOOLS=C:\Program Files\Microsoft Visual Studio .NET 2003\Common7\Tools\
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): windir=C:\WINDOWS
[2005/8/30 3:57:49:820] Debug 50103 (Environment:getEnvironmentStrings): NLS_LANG=AMERICAN_AMERICA.WE8MSWIN1252
[2005/8/30 3:57:49:940] Debug 50103 (OC4JWebServer:findFreePort): HTTP:3000
[2005/8/30 3:57:49:940] Debug 50103 (OC4JWebServer:start): port=3000 docroot=c:/docume~1/george~1.pet/locals~1/temp/docroot srcroot=E:\DevSuiteHome\reports\docroot config=null
[2005/8/30 3:57:55:267] Debug 50103 (OC4JWebServer:findFreePort): RMI:3001
[2005/8/30 3:57:55:377] Debug 50103 (OC4JWebServer:findFreePort): JMS:3002
[2005/8/30 3:57:57:630] Info 56023 (ServerImpl:ServerImpl): Idle thread has been started
[2005/8/30 3:57:57:670] Info 56020 (EngineManager:spawnEngine): Launching engine rwEng-0
[2005/8/30 3:57:57:680] Debug 50103 (EngineManager:spawnEngine): Start engine command line = E:\DevSuiteHome\jdk\jre\bin\javaw -server -cp "E:\DevSuiteHome\j2ee\home\lib\ojsp.jar;E:\DevSuiteHome\reports\jlib\rwrun.jar;E:\DevSuiteHome\jlib\zrclient.jar" -Xbootclasspath/p:E:\DevSuiteHome\vbroker4\lib\vbjboot.jar -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=rep_george-petrehus-rwbuilder ORACLE_HOME=E:\DevSuiteHome engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=E:\DevSuiteHome\reports\logs\rep_george-petrehus-rwbuilder\rwEng-0.trc tracemode=trace_replace cacheDir=E:\DevSuiteHome\reports\cache
[2005/8/30 3:57:57:680] Info 56021 (EngineManager:spawnEngine): Engine rwEng-0 has been launched
[2005/8/30 3:57:57:680] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Initial
[2005/8/30 3:57:57:690] Debug 50103 (RWEngine:init): args[0]=ORACLE_HOME=E:\DevSuiteHome
[2005/8/30 3:57:57:690] Debug 50103 (RWEngine:init): args[1]=frombuilder=yes
[2005/8/30 3:57:57:690] Debug 50103 (RWEngine:init): args[2]=name=rwEng-0
[2005/8/30 3:57:57:690] Debug 50103 (RWEngine:init): args[3]=server=rep_george-petrehus-rwbuilder
[2005/8/30 3:57:57:690] Debug 50103 (RWEngine:init): args[4]=cachedir=E:\DevSuiteHome\reports\cache
[2005/8/30 3:57:57:690] Debug 50103 (RWEngine:init): args[5]=traceopts=trace_all
[2005/8/30 3:57:57:690] Debug 50103 (RWEngine:init): args[6]=tracefile=
[2005/8/30 3:57:57:690] Debug 50103 (RWEngine:init): args[7]=tracemode=trace_replace
[2005/8/30 3:57:57:931] Info 55007 (EngineImpl:loadLibrary): Load rw90.dll succeeded
[2005/8/30 3:57:58:632] Debug 50103 (EngineImpl:init): useDataCache = null
[2005/8/30 3:57:58:632] Debug 50103 (EngineImpl:init): ignoreDataParameter = null
[2005/8/30 3:57:58:632] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()
[2005/8/30 3:57:58:632] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw90
[2005/8/30 3:57:58:632] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng
[2005/8/30 3:57:58:632] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = rep_george-petrehus-rwbuilder
[2005/8/30 3:57:58:632] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = E:\DevSuiteHome\reports\cache
[2005/8/30 3:57:58:632] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null
[2005/8/30 3:57:58:632] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null
[2005/8/30 3:57:58:632] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all
[2005/8/30 3:57:58:632] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = null
[2005/8/30 3:57:58:632] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_replace
[2005/8/30 3:57:58:632] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = yes
[2005/8/30 3:57:58:632] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null
[2005/8/30 3:57:59:2] (rwsjni:_CInitEngine) REPORTS_DEFAULT_DISPLAY=<UNDEFINED>
[2005/8/30 3:57:59:2] (rwsjni:_CInitEngine) batch flag = FALSE
[2005/8/30 3:57:59:2] (rwsjni:_CInitEngine) defaultDisplay flag = FALSE
[2005/8/30 3:57:59:12] (rwsjni:_CInitEngine) advancedimaging flag = TRUE
[2005/8/30 3:57:59:72] (rwtk:rwtkst) Initilaizing the Toolkit System....
[2005/8/30 3:57:59:72] (rwti:rwtisst) Starting the Image Subsystem
[2005/8/30 3:57:59:72] (C Engine) Starting up Image Manager Service
[2005/8/30 3:57:59:363] Debug 50103 (ImageManager:init): initialzing Image Maanger
[2005/8/30 3:57:59:363] Debug 50103 (ImageManager:loadReaderFactories): loading Image Readers
[2005/8/30 3:57:59:363] Debug 50103 (ImageManager:loadReaderFactories): done loading image readers
[2005/8/30 3:57:59:363] Debug 50103 (ImageManager:loadWriterFactories): Loading the Image writers
[2005/8/30 3:57:59:363] Debug 50103 (ImageManager:loadWriterFactories ): loaded the Image writers successfully
[2005/8/30 3:57:59:363] Debug 50103 (ImageManager:init): quit
[2005/8/30 3:57:59:363] (rwtic:rwticst) Starting up the Image caching service
[2005/8/30 3:57:59:393] (rwtic:rwticst) Image caching service started successfully
[2005/8/30 3:57:59:393] (rwti:rwtisst) Image Subsystem Started
[2005/8/30 3:57:59:393] (rwtk:rwtkst) Toolkit System initialized.
[2005/8/30 3:57:59:393] Debug 50103 (EngineImpl:EngineImpl): CInitEngine returns 0
[2005/8/30 3:57:59:393] Info 56026 (EngineManager:registerEngine): Reports Server started up engine rwEng-0
[2005/8/30 3:57:59:393] Info 55003 (RWEngine:init): Register this engine to Oracle Reports Server rep_george-petrehus-rwbuilder
[2005/8/30 3:57:59:393] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Ready
[2005/8/30 3:57:59:483] State 56012 (IdleThread:run): Reports Server is ready
[2005/8/30 3:58:9:726] Debug 50103 (RWReport:getCurrentReport): Inprocess Server Trace Object available
[2005/8/30 3:58:9:736] Debug 50103 (Report:(Proxy, Trace):1): Got an engine
[2005/8/30 3:58:9:996] Debug 50103 (Report:(Proxy, Trace):2): Report created:95934472
[2005/8/30 3:58:10:6] Debug 50103 (XMLPDS): setHelpSetID: 1
[2005/8/30 3:58:10:6] Debug 50103 (XMLPDS): needSignOnParameter: True.
[2005/8/30 3:58:10:918] Debug 50103 (OC4JWebServer:start): Started - awaiting requests at docroot=c:/docume~1/george~1.pet/locals~1/temp/docroot port=3000
[2005/8/30 3:58:13:110] Debug 50103 (OC4JWebServer:send): http://George-Petrehus:3000/rwWarmUp.jsp
[2005/8/30 3:58:14:52] Debug 50103 (OC4JWebServer:send): contentType="text/html;charset=ISO-8859-1"&charset="ISO-8859-1"&encoding="ISO8859_1"
[2005/8/30 3:58:14:62] Debug 50103 (OC4JWebServer:send): Webserver warmed up
[2005/8/30 3:58:21:201] Debug 50103 (JDBCPDS): setHelpSetID: 2
[2005/8/30 3:58:21:201] Debug 50103 (JDBCPDS): needSignOnParameter: TRUE.
[2005/8/30 3:58:22:663] Debug 50103 (textpds): TextDataSourceFactory: setReportContext
[2005/8/30 3:58:22:663] Debug 50103 (textpds): setHelpSetID: null
[2005/8/30 3:58:22:663] Debug 50103 (textpds): needSignOnParameter: true
[2005/8/30 3:58:26:718] Debug 50103 (SP PDS: class ro.sii.reports.plugin.sppds.SPDataSourceFactory): TextDataSourceFactory: setReportContext
[2005/8/30 3:58:26:718] Debug 50103 (SP PDS: class ro.sii.reports.plugin.sppds.SPDataSourceFactory): setHelpSetID: null
[2005/8/30 3:58:26:718] Debug 50103 (SP PDS: class ro.sii.reports.plugin.sppds.SPDataSourceFactory): needSignOnParameter: true
[2005/8/30 3:58:50:108] Debug 50103 (RWReport:getCurrentReport): Inprocess Server Trace Object available
[2005/8/30 3:58:50:108] Debug 50103 (Report:(Proxy, Trace):1): Got an engine
[2005/8/30 3:58:50:108] Debug 50103 (Report:(Proxy, Trace):2): Report created:52798480
[2005/8/30 3:58:50:138] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPDataSource): setReportObject
[2005/8/30 3:58:50:138] Debug 50103 (Proxy:accessProperty): Item:oracle.reports.definition.RWReport; Prop:43; Attr:null
[2005/8/30 3:58:50:138] Debug 50103 (Proxy:accessProperty): Return:yes
[2005/8/30 3:58:50:138] Debug 50103 (SP PDS: class ro.sii.reports.plugin.sppds.SPDataSourceFactory): getDefaultSignOnParameter: SP_SIGNON
[2005/8/30 3:59:25:524] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPDataSource): getReferencedColumns
[2005/8/30 3:59:25:524] Error 50103 (C Engine): 15:59:25 WRN Note: The query 'QP_1' has created the bind parameter(s) TEST user param.
[2005/8/30 3:59:28:328] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPDataSource): describe() -- success
[2005/8/30 3:59:28:498] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSetMetaData): SPResultSetMetaData-getColumnCount
[2005/8/30 3:59:28:498] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSetMetaData): SPResultSetMetaData-getColumnName
[2005/8/30 3:59:28:498] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSetMetaData): SPResultSetMetaData-getColumnType
[2005/8/30 3:59:28:498] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSetMetaData): SPResultSetMetaData-convertToPluginType
[2005/8/30 3:59:28:498] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSetMetaData): SPResultSetMetaData-getColumnType -- return = 10003
[2005/8/30 3:59:28:498] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSetMetaData): SPResultSetMetaData-getPrecision
[2005/8/30 3:59:28:498] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSetMetaData): SPResultSetMetaData-getScale
[2005/8/30 3:59:28:498] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSetMetaData): SPResultSetMetaData-getColumnLabel
[2005/8/30 3:59:28:498] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSetMetaData): SPResultSetMetaData-getColumnDisplySize
[2005/8/30 3:59:28:498] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSetMetaData): SPResultSetMetaData-getSortOrder
[2005/8/30 3:59:40:163] Error 50103 (C Engine): Creating XML parser object...
[2005/8/30 3:59:40:173] Error 50103 (C Engine): XML Parser Created!
[2005/8/30 3:59:40:264] Error 50103 (C Engine): Parsing report definition from:
[2005/8/30 3:59:40:264] Error 50103 (C Engine): rwTemplates.xml
[2005/8/30 3:59:40:354] Error 50103 (C Engine): Report definition parsed successfully!
[2005/8/30 3:59:41:105] Error 50103 (C Engine): *** Starting up the JVM ***
[2005/8/30 3:59:41:105] Error 50103 (C Engine): JVM CLASSPATH variable is:
[2005/8/30 3:59:41:105] Error 50103 (C Engine): E:\DevSuiteHome\reports\jlib\rwbuilder.jar;E:\DevSuiteHome\reports\jlib\rwrun.jar;E:\DevSuiteHome\jlib\zrclient.jar;E:\DevSuiteHome\j2ee\home\oc4j.jar;E:\DevSuiteHome\j2ee\home\lib\ojsp.jar;E:\DevSuiteHome\reports\jlib\xrpdsolap.jar;D:\work\SII\Project\ReportsPlugin\Stored Procedure PDS\SPPDS\deploy\sppds.jar
[2005/8/30 3:59:41:105] Error 50103 (C Engine): *** JVM started successfully ***
[2005/8/30 3:59:41:165] Error 50103 (C Engine): Creating JSP parser object...
[2005/8/30 3:59:41:175] Error 50103 (C Engine): JSP Parser Created!
[2005/8/30 3:59:49:826] Error 50103 (C Engine):
[2005/8/30 3:59:49:876] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPDataSource): getReferencedColumns
[2005/8/30 3:59:50:16] Error 50103 (rwbo:rwbogirwti): running
[2005/8/30 3:59:50:16] Error 50103 (C Engine): Reading Image from binary stream
[2005/8/30 3:59:50:16] Debug 50103 (ImageManager:loadImage): running
[2005/8/30 3:59:50:567] Debug 50103 (ImageUtility:getImageFormat ): Start
[2005/8/30 3:59:50:567] Debug 50103 (ImageUtility:getImageFormat GIF ): END
[2005/8/30 3:59:50:567] Debug 50103 (ImageManager:getReaderObject ): Start : imageType1
[2005/8/30 3:59:50:567] Debug 50103 (ImageUtility:loadClass ): Start oracle.reports.toolkit.image.reader.GIFImageReader
[2005/8/30 3:59:50:567] Debug 50103 (ImageUtility:loadClass ): Endoracle.reports.toolkit.image.reader.GIFImageReader@a449e0
[2005/8/30 3:59:50:567] Debug 50103 (ImageManager:getReaderObject ): Endoracle.reports.toolkit.image.reader.GIFImageReader@a449e0
[2005/8/30 3:59:50:567] Debug 50103 (GIFImageReader:readImage ): Start
[2005/8/30 3:59:50:857] Debug 50103 (ImageSource:setBufferedImage ): Start BufferedImage@4854f6: type = 13 IndexColorModel: #pixelBits = 8 numComponents = 3 color space = java.awt.color.ICC_ColorSpace@c20893 transparency = 1 transIndex = -1 has alpha = false isAlphaPre = false ByteInterleavedRaster: width = 135 height = 36 #numDataElements 1 dataOff[0] = 0
[2005/8/30 3:59:50:857] Debug 50103 (GIFImageReader:readImage ): End oracle.reports.toolkit.image.ImageSource@c11557
[2005/8/30 3:59:50:857] Debug 50103 (ImageManager:addSource): Add image to the image store
[2005/8/30 3:59:50:857] Debug 50103 (ImageManager:addImageSource): Size is 0
[2005/8/30 3:59:50:857] Debug 50103 (ImageManager:addImageSource): Id is 1
[2005/8/30 3:59:50:857] Debug 50103 (ImageManager:loadImage): quit
[2005/8/30 3:59:50:857] Error 50103 (C Engine): Image successfully Loaded, image ID is 1
[2005/8/30 3:59:50:857] Error 50103 (rwbo:rwbogirwti): Done
[2005/8/30 3:59:51:17] APP 50103 (C Engine): 15:59:51 APP ( Frame
[2005/8/30 3:59:51:17] APP 50103 (C Engine): 15:59:51 APP . ( Text Boilerplate B_OR$BODY_SECTION
[2005/8/30 3:59:51:17] APP 50103 (C Engine): 15:59:51 APP . ) Text Boilerplate B_OR$BODY_SECTION
[2005/8/30 3:59:51:17] APP 50103 (C Engine): 15:59:51 APP . ( Generic Graphical Object B_1_SEC2
[2005/8/30 3:59:51:27] APP 50103 (C Engine): 15:59:51 APP . ) Generic Graphical Object B_1_SEC2
[2005/8/30 3:59:51:27] APP 50103 (C Engine): 15:59:51 APP ) Frame
[2005/8/30 3:59:51:27] APP 50103 (C Engine): 15:59:51 APP ( Frame
[2005/8/30 3:59:51:27] APP 50103 (C Engine): 15:59:51 APP . ( Frame M_G_FIRST_NAME_GRPFR
[2005/8/30 3:59:51:27] APP 50103 (C Engine): 15:59:51 APP .. ( Frame M_G_FIRST_NAME_HDR
[2005/8/30 3:59:51:27] APP 50103 (C Engine): 15:59:51 APP ... ( Text Boilerplate B_FIRST_NAME
[2005/8/30 3:59:51:27] APP 50103 (C Engine): 15:59:51 APP ... ) Text Boilerplate B_FIRST_NAME
[2005/8/30 3:59:51:27] APP 50103 (C Engine): 15:59:51 APP .. ) Frame M_G_FIRST_NAME_HDR
[2005/8/30 3:59:51:27] APP 50103 (C Engine): 15:59:51 APP .. ( Repeating Frame R_G_FIRST_NAME
[2005/8/30 3:59:51:27] APP 50103 (C Engine): 15:59:51 APP ... ( Group G_first_name Local Break: 0 Global Break: 0
[2005/8/30 3:59:51:48] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPDataSource): execute begin
[2005/8/30 3:59:51:68] Debug 50103 (SP PDS: class ro.sii.reports.plugin.sppds.SPProcedureFactory): +++++ getResultSet BEGIN
[2005/8/30 3:59:52:279] Debug 50103 (SP PDS: class ro.sii.reports.plugin.sppds.SPProcedureFactory): Try connection:
[2005/8/30 3:59:52:279] Debug 50103 (SP PDS: class ro.sii.reports.plugin.sppds.SPProcedureFactory): Connection performed sucssefully
[2005/8/30 3:59:52:279] Debug 50103 (SP PDS: class ro.sii.reports.plugin.sppds.SPProcedureFactory): call getallemployees (?)
[2005/8/30 3:59:52:309] Debug 50103 (SP PDS: class ro.sii.reports.plugin.sppds.SPProcedureFactory): ResultSet added to colection
[2005/8/30 3:59:52:309] Debug 50103 (SP PDS: class ro.sii.reports.plugin.sppds.SPProcedureFactory): +++++ getResultSet END
[2005/8/30 3:59:52:309] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPDataSource): execute end
[2005/8/30 3:59:52:309] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPDataSource): describe() -- success
[2005/8/30 3:59:52:399] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSet): next
[2005/8/30 3:59:52:399] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSet): getObject -- begin
[2005/8/30 3:59:52:419] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSet): next
[2005/8/30 3:59:52:419] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSet): getObject -- begin
[2005/8/30 3:59:52:419] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSet): next
[2005/8/30 3:59:52:419] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSet): getObject -- begin
[2005/8/30 3:59:52:419] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSet): next
[2005/8/30 3:59:52:419] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSet): getObject -- begin
[2005/8/30 3:59:52:419] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSet): next
[2005/8/30 3:59:52:419] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSet): getObject -- begin
[2005/8/30 3:59:52:419] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSet): next
[2005/8/30 3:59:52:419] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSet): getObject -- begin
[2005/8/30 3:59:52:419] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSet): next
[2005/8/30 3:59:52:419] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSet): getObject -- begin
[2005/8/30 3:59:52:419] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPResultSet): next
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP ... ) Group G_first_name
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP ... ( Text Field F_FIRST_NAME
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP .... ( Database Column first_name
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP .... ) Database Column first_name
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP ... ) Text Field F_FIRST_NAME
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP ... ( Group G_first_name Local Break: 1 Global Break: 1
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP ... ) Group G_first_name
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP ... ( Text Field F_FIRST_NAME
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP .... ( Database Column first_name
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP .... ) Database Column first_name
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP ... ) Text Field F_FIRST_NAME
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP ... ( Group G_first_name Local Break: 2 Global Break: 2
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP ... ) Group G_first_name
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP ... ( Text Field F_FIRST_NAME
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP .... ( Database Column first_name
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP .... ) Database Column first_name
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP ... ) Text Field F_FIRST_NAME
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP ... ( Group G_first_name Local Break: 3 Global Break: 3
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP ... ) Group G_first_name
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP ... ( Text Field F_FIRST_NAME
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP .... ( Database Column first_name
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP .... ) Database Column first_name
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP ... ) Text Field F_FIRST_NAME
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP ... ( Group G_first_name Local Break: 4 Global Break: 4
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP ... ) Group G_first_name
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP ... ( Text Field F_FIRST_NAME
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP .... ( Database Column first_name
[2005/8/30 3:59:52:439] APP 50103 (C Engine): 15:59:52 APP .... ) Database Column first_name
[2005/8/30 3:59:52:449] APP 50103 (C Engine): 15:59:52 APP ... ) Text Field F_FIRST_NAME
[2005/8/30 3:59:52:449] APP 50103 (C Engine): 15:59:52 APP ... ( Group G_first_name Local Break: 5 Global Break: 5
[2005/8/30 3:59:52:449] APP 50103 (C Engine): 15:59:52 APP ... ) Group G_first_name
[2005/8/30 3:59:52:449] APP 50103 (C Engine): 15:59:52 APP ... ( Text Field F_FIRST_NAME
[2005/8/30 3:59:52:449] APP 50103 (C Engine): 15:59:52 APP .... ( Database Column first_name
[2005/8/30 3:59:52:449] APP 50103 (C Engine): 15:59:52 APP .... ) Database Column first_name
[2005/8/30 3:59:52:449] APP 50103 (C Engine): 15:59:52 APP ... ) Text Field F_FIRST_NAME
[2005/8/30 3:59:52:449] APP 50103 (C Engine): 15:59:52 APP ... ( Group G_first_name Local Break: 6 Global Break: 6
[2005/8/30 3:59:52:449] APP 50103 (C Engine): 15:59:52 APP ... ) Group G_first_name
[2005/8/30 3:59:52:449] APP 50103 (C Engine): 15:59:52 APP ... ( Text Field F_FIRST_NAME
[2005/8/30 3:59:52:449] APP 50103 (C Engine): 15:59:52 APP .... ( Database Column first_name
[2005/8/30 3:59:52:449] APP 50103 (C Engine): 15:59:52 APP .... ) Database Column first_name
[2005/8/30 3:59:52:449] APP 50103 (C Engine): 15:59:52 APP ... ) Text Field F_FIRST_NAME
[2005/8/30 3:59:52:449] APP 50103 (C Engine): 15:59:52 APP ... ( Group G_first_name Local Break: 7 Global Break: 7
[2005/8/30 3:59:52:449] APP 50103 (C Engine): 15:59:52 APP ... ) Group G_first_name
[2005/8/30 3:59:52:449] APP 50103 (C Engine): 15:59:52 APP .. ) Repeating Frame R_G_FIRST_NAME
[2005/8/30 3:59:52:449] APP 50103 (C Engine): 15:59:52 APP . ) Frame M_G_FIRST_NAME_GRPFR
[2005/8/30 3:59:52:449] APP 50103 (C Engine): 15:59:52 APP ) Frame
[2005/8/30 3:59:58:647] APP 50103 (C Engine): rwbubr():DOCROOT='c:/docume~1/george~1.pet/locals~1/temp/docroot'
BASENAME='MODULE1'
[2005/8/30 3:59:58:647] APP 50103 (C Engine): TEMPFILE:c:/docume~1/george~1.pet/locals~1/temp/docroot\MODULE100802904
[2005/8/30 3:59:58:968] APP 50103 (C Engine):
[2005/8/30 3:59:58:968] Debug 50103 (SP PDSclass ro.sii.reports.plugin.sppds.SPDataSource): getReferencedColumns
[2005/8/30 3:59:59:508] APP 50103 (rwbo:rwbogirwti): running
[2005/8/30 3:59:59:508] APP 50103 (C Engine): Reading Image from binary stream
[2005/8/30 3:59:59:508] Debug 50103 (ImageManager:loadImage): running
[2005/8/30 3:59:59:508] Debug 50103 (ImageUtility:getImageFormat ): Start
[2005/8/30 3:59:59:508] Debug 50103 (ImageUtility:getImageFormat GIF ): END
[2005/8/30 3:59:59:508] Debug 50103 (ImageManager:getReaderObject ): Start : imageType1
[2005/8/30 3:59:59:508] Debug 50103 (ImageManager:getReaderObject ): Endoracle.reports.toolkit.image.reader.GIFImageReader@a449e0
[2005/8/30 3:59:59:508] Debug 50103 (GIFImageReader:readImage ): Start
[2005/8/30 3:59:59:529] Debug 50103 (ImageSource:setBufferedImage ): Start BufferedImage@f23491: type = 13 IndexColorModel: #pixelBits = 8 numComponents = 3 color space = java.awt.color.ICC_ColorSpace@c20893 transparency = 1 transIndex = -1 has alpha = false isAlphaPre = false ByteInterleavedRaster: width = 135 height = 36 #numDataElements 1 dataOff[0] = 0
[2005/8/30 3:59:59:529] Debug 50103 (GIFImageReader:readImage ): End oracle.reports.toolkit.image.ImageSource@1593ce6
[2005/8/30 3:59:59:529] Debug 50103 (ImageManager:addSource): Add image to the image store
[2005/8/30 3:59:59:529] Debug 50103 (ImageManager:addImageSource): Size is 1
[2005/8/30 3:59:59:529] Debug 50103 (ImageManager:addImageSource): Id is 2
[2005/8/30 3:59:59:529] Debug 50103 (ImageManager:loadImage): quit
[2005/8/30 3:59:59:529] APP 50103 (C Engine): Image successfully Loaded, image ID is 2
[2005/8/30 3:59:59:529] APP 50103 (rwbo:rwbogirwti): Done
[2005/8/30 3:59:59:529] APP 50103 (C Engine): Creating JSP parser object...
[2005/8/30 3:59:59:539] APP 50103 (C Engine): JSP Parser Created!
[2005/8/30 3:59:59:819] APP 50103 (C Engine): zrhcursor_createReportCursor()
[2005/8/30 3:59:59:819] APP 50103 (C Engine): 15:59:59 APP ( Database Column TEST user param
[2005/8/30 3:59:59:819] APP 50103 (C Engine): 15:59:59 APP ) Database Column TEST user param
[2005/8/30 3:59:59:829] Debug 50103 (OC4JWebServer:send): http://George-Petrehus:3000/MODULE100802904.jsp?frombuilder=yes&validatetag=yes&JSPRUN=Yes&TEST%20user%20param=nmm%2Cn
[2005/8/30 4:0:25:723] Debug 50103 (RWClient:initCORBA): Visibroker connection pool size is =500
[2005/8/30 4:0:25:723] Debug 50103 (RWClient:RWClientInit): null, oracle home: E:\DevSuiteHome
[2005/8/30 4:0:25:963] Warning 50103 (RWClient.RWClientInit): Failed to connect to OiD server
[2005/8/30 4:0:26:13] Debug 50103 (KeyMapParser:readKeyMapFile): file: E:\DevSuiteHome\reports\conf\cgicmd.dat
[2005/8/30 4:0:26:33] Debug 50103 (ReportTag:doStartTag()): Start - id = report
[2005/8/30 4:0:26:33] Debug 50103 (TagValidation:validate): validation is on
[2005/8/30 4:0:26:33] Debug 50103 (TagValidation:idUniqueness): start
[2005/8/30 4:0:26:33] Debug 50103 (TagValidation:idUniqueness): end
[2005/8/30 4:0:26:33] Debug 50103 (ReportTag:doStartTag()): queryString :frombuilder=yes&validatetag=yes&JSPRUN=Yes&TEST%20user%20param=nmm%2Cn
[2005/8/30 4:0:27:114] Info 50103 (RWClientUtility:findServer): Cannot find server: rep_George-Petrehus
[2005/8/30 4:0:27:144] Debug 50103 (RWJspProxy:RWJspProxy): cmdline: jobname=/MODULE100802904.jsp jsprun=Yes test user param=nmm,n
[2005/8/30 4:0:27:164] Debug 50103 (ReportRunner:connectToServer): New Connection request for userid: to server: null
[2005/8/30 4:0:27:214] Debug 50103 (ReportRunner:connectToServer): Connection succeeded for user: to server: null
[2005/8/30 4:0:27:234] Info 50132 (JobObject:reset): jobid = 1 Get command line: jobname=/MODULE100802904.jsp jsprun=Yes test user param=nmm,n authid=RWUser
[2005/8/30 4:0:27:234] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Reserved
[2005/8/30 4:0:27:234] Debug 50103 (EngineImpl:setCommandLine): Running
[2005/8/30 4:0:27:234] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Running
[2005/8/30 4:0:27:245] Info 50132 (EngineImpl:setCommandLine): Get command line: jobname=/MODULE100802904.jsp jsprun=Yes test user param=nmm,n authid=RWUser
[2005/8/30 4:0:27:245] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Idle
[2005/8/30 4:0:27:245] Debug 50103 (EngineImpl:setCommandLine): Quit
[2005/8/30 4:0:27:245] Debug 50103 (Report:(Proxy, Trace):1): Got an engine
[2005/8/30 4:0:27:245] Debug 50103 (RWClientUtility:isFromPortal): portal: null
[2005/8/30 4:0:27:245] Debug 50103 (RWClientUtility:isFromPortal): webdbversion: null
[2005/8/30 4:0:27:245] Debug 50103 (EngineImpl:createReport): Running
[2005/8/30 4:0:27:245] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Running
[2005/8/30 4:0:27:275] Error 50103 (C Engine): 16:00:27 ERR REP-0152: Positional argument specified after keyword.
[2005/8/30 4:0:27:275] State 56016 (JobManager:updateJobStatus): Job 1 status is: Terminated with error:
REP-159: Syntax error on command line.
[2005/8/30 4:0:27:275] Debug 50103 (JobManager:notifyWaitingJobs): Master job 1 notify its duplicated jobs.
[2005/8/30 4:0:27:275] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 1
[2005/8/30 4:0:27:295] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Idle
[2005/8/30 4:0:27:295] Debug 50103 (EngineImpl:createReport): Quit
[2005/8/30 4:0:27:295] Debug 50103 (Report:(Proxy, Trace):2): Report created:5
[2005/8/30 4:0:27:295] Debug 50103 (TagValidation:validate): validation is on
[2005/8/30 4:0:27:295] Debug 50103 (TagValidation:idUniqueness): start
[2005/8/30 4:0:27:295] Debug 50103 (TagValidation:idUniqueness): end
[2005/8/30 4:0:27:295] Debug 50103 (Report:setDefinition(xml):0):
[2005/8/30 4:0:27:295] Debug 50103 (Proxy:accessProperty): Item:oracle.reports.definition.RWReport; Prop:34; Attr:
[2005/8/30 4:0:27:295] Debug 50103 (Proxy:accessProperty): Return:
[2005/8/30 4:0:27:295] Debug 50103 (Report:setDefinition(xml):1): Report=5
[2005/8/30 4:0:27:295] Debug 50103 (Proxy:accessProperty): Item:oracle.reports.definition.RWReport; Prop:0; Attr:null
[2005/8/30 4:0:27:295] Debug 50103 (EngineReportImpl:getStringArrayProperty): Running

Error running 9i reports from forms.

Hi folks,
i am having problems running 9i reports from a form.
i have installed Oracle 9iDS on a Win XP machine with 256 MB RAM and a Pentium 1.4Ghz processor.
i also have a local Oracle 9i database. i have created several reports that i am trying to run from some forms but all efforts to date have failed.
below is some sample code.
declare
v_rid report_object;
v_rjob varchar2(100);
v_rptstatus varchar2(100);
v_jobid varchar2(100);
BEGIN
/*get handle to report object itself*/
v_rid := find_report_object('pbranchlist');
set_report_object_property(v_rid,REPORT_EXECUTION_MODE,BATCH);
set_report_object_property(v_rid,REPORT_DESFORMAT,'htmlcss');
set_report_object_property(v_rid,REPORT_DESTYPE,'CACHE');
set_report_object_property(v_rid,REPORT_SERVER,'repsrv');
set_report_object_property(v_rid,REPORT_COMM_MODE,synchronous);
v_rjob := run_report_object(v_rid);
v_rptstatus := report_object_status(v_rjob);
while v_rptstatus in ('RUNNING','OPENING_REPORT','ENQUEUED') loop
     v_rptstatus := report_object_status(v_rjob);
     message(v_rptstatus);
end loop;
if v_rptstatus = 'FINISHED' then
     /*display report in browser*/
--      web.show_document('http://steve:8888/reports/rwservlet/getjobid'||
--      substr(v_rptsvrjob,instr(v_rptsvrjob,'_',-1)+1)||'?'||'server=repsrv','_blank');
web.show_document('/reports/rwservlet/getjobid'||substr(v_rjob,instr(v_rjob,'_',-1)+1)||'?'||'server=repsrv','_blank');
else
     message('error running Report');
end if;
end;
pbranchlist is defined in the form,
repsrv is a report server i installed and explicitly started.
on clicking the button to run the above code, i get a message on the browser status bar as follows
opening http://steve:8888/reports/rwservlet/getjobid11?server=repsrv...
that's it. it stays like that forever and a progress bar showing the status of the operation gets to the halfway mark and stays there for up to 15 minutes.
I eventually halted the operation by clicking the stop button of the browser. The form then becomes totally non-responsive with the mouse indicator changing to the hour-glass shape and a small vertical bar moving rapidly back and forth at the bottom of the form window.
My only recourse then is to explicitly close the browser window.
I have already configured Reports to run in non single sign-on mode by setting SINGLESIGNON=NO in the rwservlet.properties file.
Is there anything i have not done properly?
Thanks in advance.

Steve,
can you check the Reports cache directory if the Reports file got created? I would assume yes, but better check.
Frank

How to run GR55 reports in background for cost center hierarchies

1. I have been asked by our users to create batch jobs to run in the background for some GR55 reports, that can then be sent directly to cost center managers via email.
I have figured out the process to do this as long as the cost center manager only needs to see a single cost center at a time. However, if they are in charge of multiple cost centers, we also want to send them a summarized report using the hierarchy we have set up. I can't seem to make this work, as the job only seem to recognize the last cost center in the group and the report is for that cost center.
Example. cost centers 100, 200 and 300 belong to hierarchy abc. If I run the job just for cost center 100 it is fine. But if I have a variant to run hierarchy abc, or even if I use the range 100 to 300, all I get is a report for cost center 300.
We cannot use BW because we only have revenue in BW. I am being asked to make this work from standard R/3 within the GR55 realm of reporting.
2. In addition, the report selection criteria includes two separate plan/forecast versions. They need to update these each month prior to running the reports and sending them out. I looked at the variables associated with the versions and tried to set them up with default values that I hoped would update automatically so that they don't have to manually change 50 or so variants each month. But I don't see any dynamic variables that I can use to have the system make that change without going into each variant individually.
3. There is another piece to this equation as well. There is another report they want sent out in batch, but it is several pages wide in SAP and several pages long. So when you run it in batch and either spool it or get it sent as an email, it is very ugly in the formatting due to all the page splits horizontally and vertically. If anyone knows how to get the report to stay together like it would if you had excel integration turned on, it would be very helpful. I have tried running it with that integration turned on, but the jobs are set up with user batch_mgr and not my id, so it isn't working well. The batch_mgr id is just a system id, not a dialog id. We also don't want the jobs set up with a regular user id because if people leave, then the jobs all need to be changed.

Kim,
I may have options for issues 1 and 2. In case of 3, what I can tell you is I understand the concern, but this is what typically happens in some standard CO reports that are not ALV compatible, I don't think there is not much there to do unless you add some custom code for the output.
In regards to point 1, yes, I have noticed that this happens in some standard and custom reporting, not sure what is going on. I came up with a work around that made the trick for my client in a similar scenario; which is editing the cost center groups. For instance, instead of having the group set as a range from 100 to 300, the groups are have listed the cost centers, 100, 200 and 300. Obviously, the disadvantage of this option is that it would require a bit of more cost center group maintenance.
In regards to point 2, I understand from your note that your users already have set up selection variants for the report. One option for you is to get the help from a developer to create a custom period variable and tiny program that runs in batch every month that would update that variable accordingly. Once that's done, you may have to update at least once, the selection variant attributes to change the period to a selection variable, so everytime from that point of time forward that the variable gets updated, it will be ready with the right value for every selection variant that uses it.
Hope this helps.
GG

Problem with running bitmap report in Oracle 6i

Hello,
I am running a report from a form using run_product in client/server enviroment. And I use the same code in all forms that run reports. In test enviroment, everything works normally. But in customer enviroment there is weird behaviour. Some reports need a lot of time to be executed, and when they are finally finished, report previewer is not maximized as it is in test enviroment. And more important problem is that one report doesn't execute at all. Report background engine is started but report doesn't come out at all.
Here is code which I use to run reports:
declare
izvestaj      varchar2(15);
pListName varchar2(20) := 'parList';
dt      varchar2(6) := 'Screen';
pList      paramlist;
BEGIN
izvestaj := 'EBS12';
begin
pList := get_parameter_list(pListName);
if not id_null(pList) then
destroy_parameter_list(pList);
end if;
pList := create_parameter_list(pListName);
if (not id_null(pList)) then
add_parameter(pList, 'P_PREDUZECE', text_parameter, to_char(:kontrolni.preduzece_id));
add_parameter(pList, 'P_PRENOS', text_parameter, to_char(:prenos.id));
add_parameter(pList, 'P_RAD', text_parameter, :prenos.chk_radnik);
add_parameter(pList, 'P_LOK', text_parameter, :prenos.chk_lokacija);
add_parameter(pList, 'P_ZAR', text_parameter, :prenos.chk_isplata);
add_parameter(pList, 'P_RAS', text_parameter, :prenos.chk_raspored);
add_parameter(pList, 'P_NAL', text_parameter, :prenos.chk_nalet);
add_parameter(pList, 'P_BEZ_RAS', text_parameter, :prenos.bez_rasporeda);
add_parameter(pList, 'P_STATUS', text_parameter, to_char(:prenos.status));
add_parameter(pList, 'P_RAD_ID', text_parameter, to_char(:prenos.radnik_id));
add_parameter(pList, 'P_SORT', text_parameter, to_char(:prenos.redosled));
add_parameter(pList, 'PARAMFORM', text_parameter,'NO');
add_parameter(pList,'DESTYPE',text_parameter,dt);
run_product(reports, izvestaj, synchronous, runtime, filesystem, pList, null);
end if;
exception
when others then
set_alert_property('cfg_error',alert_message_text,'Poziv izveštaja nije uspeo! '||sqlerrm);
if (alert_button1=show_alert('cfg_error')) then null;
end if;
raise form_trigger_failure;
end;
END;
Is it maybe some enviroment settings problem and if yes, what should I pay attention on?
Tnx in advance,
Nati

Hello,
When you put a block on a "new stacked canvas" that canvas is generated as a popup canvas. If that popup overlaps with some other generated items (for instance: items in master block) Forms will not show it.
You can try showing that popup canvas programatically with Show_View('canvas_name') in When-New-Form-Instance and see what happens.
Dalibor
P.S. Why do you have to put detail block on a popup canvas? Why don't you simply put it on a "same content canvas"?

Problem to run a report

Hi all,
I have a problem to run report in report server other than the report server in process.I installed 9IDS on 2 PCs.I use one PC as a small Appserver.Exactly, i run OC4J on it, i also create a report server on it, .Both OC4J and report server are permantly ran on my small AppServer.When i run a report using the report server in process, it work well.But when i try to run a report using my report server, i receive these errors messages:
REP-110:Impossible to open the report
REP-1070:Error when trying to open or save report.
I don't know what wrong!Every answers to help are welcomed.
Thanks!

a couple more things .. since you are running your server as a real user, make sure the directory your report file is in allows access for this particular user.
if your reports come from a mapped drive, it will not work as windows services don't have access to mapped drives.
if you are using a CGIMAP-key, make sure your CGICMD.DAT is available. you can check this by submitting the showmap servlet command (like you did the showenv).
you can find even more hints in the following tech note:
Article-ID: <Note:215469.1>
Circulation: PUBLISHED (EXTERNAL)
Folder: tools.Developer.Reports.Generic
Topic: Errors
Title: Comprehensive REP-110 Troubleshooting and Overview Guide
which is available via matalink.
thanks,
ph.

Problem running a report in forms.

Hello!
I am having a problem with running a report in a form. I have installed on my computer Oracle developer suite 10g, weblogic, oracle database 11g. Now i have a main form in witch runs froms and reports. The forms and reports had run well on oracle 6i but now i am faceing with a issue, the forms are running but the reports do not. In oracle 6i the reports did run with run_product, now with REPORT_OBJECT. I don't understand what structure could i use. Do i have to install Application server ???? PLS explain what do i have to do, all the configuration necessery, other ipoduct installation if needed. thanks!!!!!
This is the main form that runs other forms and reports:
DECLARE
     nod varchar2(50);
     htree           ITEM;
     lis paramlist;
     repid REPORT_OBJECT;
     v_rep VARCHAR2(100);
     rep_status varchar2(100);
BEGIN
     nod:=ftree.get_tree_node_property('COP1',ftree.get_tree_selection('COP1',1),ftree.node_value);
     htree := Find_Item('FRONT.COP1');
     Ftree.Set_Tree_Selection(HTREE, :SYSTEM.TRIGGER_NODE, Ftree.SELECT_ON);
     --lis:=create_parameter_list('LISTA');
     :GLOBAL.PROJECT_PATH:= 'D:\Diploma\Last_version\rap\';
-- forme
     if lower(nod) = 'intretinere clienti' then
          open_form('D:\Diploma\Last_version\INTRETINERE_CLIENTI',ACTIVATE, SESSION);
     ELSIF LOWER(nod) = 'produse clienti' then
          --add_parameter(lis,'USERU',TEXT_PARAMETER,:PAROLA.USERU);
          open_form('D:\Diploma\Last_version\PROD_CL_inch',ACTIVATE, NO_SESSION,lis);
-- rapoarte
     elsif upper(nod)='CLIENT' then begin
          run_product(REPORTS,'D:\Diploma\Last_version\rap\CLIENT',SYNCHRONOUS,RUNTIME,FILESYSTEM,'',NULL);
     --v_rep := RUN_REPORT_OBJECT('D:\Diploma\Last_version\rap\CLIENT');
     end;
     elsif upper(nod)='PRODUSE BANCARE DESCHISE IN PERIOADA' then begin
          run_product(REPORTS,'D:\Diploma\Last_version\rap\PRODUSE_PERIOADA',SYNCHRONOUS,RUNTIME,FILESYSTEM,'',NULL);
     --repid := find_report_object('PRODUSE_PERIOADA');
     --SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE, SYNCHRONOUS);
     --SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
--rep_status := REPORT_OBJECT_STATUS(repid);
--     v_rep := RUN_REPORT_OBJECT('D:\Diploma\Last_version\rap\PRODUSE_PERIOADA');
--v_rep := RUN_REPORT_OBJECT(repid);
     end;
     elsif upper(nod)='DEPOZITE SCADENTE IN PERIOADA' then
          run_product(REPORTS,'D:\Diploma\Last_version\rap\DEPOZITE_SCAD',SYNCHRONOUS,RUNTIME,FILESYSTEM,'',null);
-- nomenclatoare
     elsif upper(nod)='TIPURI PRODUSE' then
          open_form('D:\Diploma\Last_version\nom_prod',activate, NO_SESSION);
     elsif upper(nod)='TIPURI DOBANZI' then
          open_form('D:\Diploma\Last_version\nom_dob',activate, NO_SESSION);
-- operatiuni
     elsif upper(nod)='DEPUNERE NUMERAR' then
          lis:=create_parameter_list('LISTA');
          add_parameter(lis,'STARE',TEXT_PARAMETER,'D');
          open_form('D:\Diploma\Last_version\depunere_numerar',activate, NO_SESSION,lis);
     elsif upper(nod)='ELIBERARE NUMERAR' then
          lis:=create_parameter_list('LISTA');
          add_parameter(lis,'STARE',TEXT_PARAMETER,'E');
          open_form('D:\Diploma\Last_version\depunere_numerar',activate, NO_SESSION,lis);
     elsif upper(nod)='TRANSFER' then
          open_form('D:\Diploma\Last_version\TRANSFER',activate, NO_SESSION);
     elsif upper(nod)='SIMULARE DEPOZIT' then
          open_form('D:\Diploma\Last_version\SIMULARE_DEPOZIT',activate, NO_SESSION);
     elsif upper(nod)='RAMBURSARE CREDIT' then
          open_form('D:\Diploma\Last_version\RAMBURSARE_CREDIT',activate, NO_SESSION);
     elsif upper(nod)='RAMBURSARE RATA' then
          open_form('D:\Diploma\Last_version\RAMBURSARE_RATA',activate, NO_SESSION);
     elsif upper(nod)='TRECERE LA RESTANTA' then
          open_form('D:\Diploma\Last_version\RESTANTA_CREDIT',activate, NO_SESSION);
     elsif upper(nod)='TRAGERE CREDIT' then
          open_form('D:\Diploma\Last_version\TRAGERE_CREDIT',activate, NO_SESSION);
          /*elsif upper(nod)='TRAGERE CREDIT' then
          open_form('D:\Diploma\Last_version\TRAGERE_CREDIT',activate, NO_SESSION);*/
     end if;
     --destroy_parameter_list(lis);
END;

Ok, so I have installed on my computer Oracle developer suite 10g, weblogic, oracle database 11g just like i said in the previous post. If i installed weblogic and i can run forms it means that i have the weblogic server running, no? If not what do i have to install for it to run ? I did what you said about the reports path, but just to be clear , i put it in environment variables REPORT_PATH='D:\diploma\Last_version\Rap'. I don't know where to put it in fromsweb.cfg ! Now about the main from, it looks like this :
DECLARE
     nod varchar2(50);
     htree           ITEM;
     lis paramlist;
     repid REPORT_OBJECT;
     v_rep VARCHAR2(100);
     rep_status varchar2(100);
     report_job_id VARCHAR2(100);
BEGIN
     nod:=ftree.get_tree_node_property('COP1',ftree.get_tree_selection('COP1',1),ftree.node_value);
     htree := Find_Item('FRONT.COP1');
     Ftree.Set_Tree_Selection(HTREE, :SYSTEM.TRIGGER_NODE, Ftree.SELECT_ON);
     --lis:=create_parameter_list('LISTA');
     --:GLOBAL.PROJECT_PATH:= 'D:\Diploma\Last_version\rap\';
-- forme
     if lower(nod) = 'intretinere clienti' then
          open_form('D:\Diploma\Last_version\INTRETINERE_CLIENTI',ACTIVATE, SESSION);
     ELSIF LOWER(nod) = 'produse clienti' then
          --add_parameter(lis,'USERU',TEXT_PARAMETER,:PAROLA.USERU);
          open_form('D:\Diploma\Last_version\PROD_CL_inch',ACTIVATE, NO_SESSION,lis);
-- rapoarte
*     elsif upper(nod)='CLIENT' then begin     *
*     v_rep := RUN_REPORT_OBJECT('CLIENT');*
*     report_job_id := RUN_REPORT_OBJECT(repid);*
*     end;*
*     elsif upper(nod)='PRODUSE BANCARE DESCHISE IN PERIOADA' then begin*
*          repid := find_report_object('PRODUSE_PERIOADA');*
*          report_job_id := RUN_REPORT_OBJECT(repid);*
*     end;*
*     elsif upper(nod)='DEPOZITE SCADENTE IN PERIOADA' then      *
*     repid := find_report_object('DEPOZITE_SCAD');*
*     report_job_id := RUN_REPORT_OBJECT(repid);*
-- nomenclatoare
     elsif upper(nod)='TIPURI PRODUSE' then
          open_form('D:\Diploma\Last_version\nom_prod',activate, NO_SESSION);
     elsif upper(nod)='TIPURI DOBANZI' then
          open_form('D:\Diploma\Last_version\nom_dob',activate, NO_SESSION);
-- operatiuni
     elsif upper(nod)='DEPUNERE NUMERAR' then
          lis:=create_parameter_list('LISTA');
          add_parameter(lis,'STARE',TEXT_PARAMETER,'D');
          open_form('D:\Diploma\Last_version\depunere_numerar',activate, NO_SESSION,lis);
     elsif upper(nod)='ELIBERARE NUMERAR' then
          lis:=create_parameter_list('LISTA');
          add_parameter(lis,'STARE',TEXT_PARAMETER,'E');
          open_form('D:\Diploma\Last_version\depunere_numerar',activate, NO_SESSION,lis);
     elsif upper(nod)='TRANSFER' then
          open_form('D:\Diploma\Last_version\TRANSFER',activate, NO_SESSION);
     elsif upper(nod)='SIMULARE DEPOZIT' then
          open_form('D:\Diploma\Last_version\SIMULARE_DEPOZIT',activate, NO_SESSION);
     elsif upper(nod)='RAMBURSARE CREDIT' then
          open_form('D:\Diploma\Last_version\RAMBURSARE_CREDIT',activate, NO_SESSION);
     elsif upper(nod)='RAMBURSARE RATA' then
          open_form('D:\Diploma\Last_version\RAMBURSARE_RATA',activate, NO_SESSION);
     elsif upper(nod)='TRECERE LA RESTANTA' then
          open_form('D:\Diploma\Last_version\RESTANTA_CREDIT',activate, NO_SESSION);
     elsif upper(nod)='TRAGERE CREDIT' then
          open_form('D:\Diploma\Last_version\TRAGERE_CREDIT',activate, NO_SESSION);
          /*elsif upper(nod)='TRAGERE CREDIT' then
          open_form('D:\Diploma\Last_version\TRAGERE_CREDIT',activate, NO_SESSION);*/
     end if;
     --destroy_parameter_list(lis);
END;
Thanks, hope u can guide me :).

Schedule measurement in SE30 - running a report in the background

Dear experts,
I have a long running ABAP report and I will need to analyze its runtime for performance improvements.
How may I correctly run this ABAP report in the background from SE30 (runtime analysis tool)? The report has to be run using a specific variant for its selection screen inputs as well.
This is what I have done:
1. Go to SE30
2. Click on "For User/Service" button under "Schedule"
3. Create new Schedule Measurement with the following details:-
- User (<my user name>),
- Client (<properly specified>),
- External Session (Any),
- Processing Category (Background Processing),
- Object Type (Report),
- Object Name (<ABAP report program name>),
- Max. No. of Scheduled Measurements (1),
- Expiration Date & Time (<properly specified>)
5. In the screen "Overview of Scheduled Measurements", I have the following displayed as well:-
- Scheduled = 1
- Started = 0
- Errors = 0
- Status = Being processed
Am I still on the right track here? (Started = 0 and there was no way I could specify the variant for the selection screen input values too)
Please help. Appreciate any inputs at all.
Thanks.

Hi,
you can try it with ST12 and the <ALL Servers> Option for tasktype B.
see this blog:
/people/hermann.gahm/blog/2010/03/22/st12-150-tracing-user-requests-tasks-http
ST12 uses SE30 / ST05 behind the covers. But here you can switch on
the trace for all servers and therefore don't have to take care for that yourself.
Kind regards,
Hermann

Run a report in PL/SQL using utl_http.request

Hi
I need to run a report in PL/SQL using utl_http.request
How that can be done ??
Thank you!

Okay, backtrack.
A web server can deliver all kinds of content. From static HTML pages, to XML files and videos and dynamic content. Including reports.
The communication language (protocol) used to talk to a web server is HTTP.
UTL_HTTP is an Oracle PL/SQL library that implements the client side of this communication. It allows the developer to write code that acts like a web browser and communicates with a web server.
Now what do you not understand and cannot use?
HTTP is not simple and easy. You need to understand the basics of this communication language in order to communicate successfully with the web server. Like knowing the difference between GET and PUT and POST commands, how the URL query string works and so on.
Once you know that, you can look at how the web server provides reports. How do you authenticate as a web browser with the web reporting system? What URLs do you use to access which reports? How do you pass name-values to the web server as report parameters? What HTTP response formats (MIME types) does the web report server provide? Which one do you plan to use and how do you parse that response into a meaning structured data format?
If you're thinking it is "easy", think again. Sure, someone here can provide sample code that for example grabs a CSV report file from a web server and (using a pipeline table function), turn that into rows and columns. But that will not teach you the fundamentals you need to know and not equip you with dealing with the problem with your own brains, hands and keyboard.
PS. In other words, learn to crawl and walk before trying to run. Get to grips with how HTTP works before diving into the deep end of web report integration.

How can I want run the reports on AD, if I have no access to AD server?

I am not an AD administrator and I do not have permissions to AD server. But I have admin permissions to a site in AD and using RSAT, can administer the site. How can I want run the reports listed below? AD is on Windows 2008R2 server.
All Administrator logons
Logon statistics
Logons during non-business hours
Multiple logon failures
Password resets (other than Security Administrator)
Successful logon after several failures
User behavior anomalies
Logons of already logged-on users
All Logons Over Weekend
Audit Policy Changed
Computer Accounts Changed

Hello,
Some of your reports can be done using RSAT with Active Directory Powershell module. Some of them including
Computer Accounts Changed needs auditing to be enabled for directory object changes. These are not predefined reports which you can simply run my friend. Can you please be more specific?
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

How to restrict running of report in foreground

My requirement is that, the user should not be allowed to run the report in foreground. Since there is a high possibility for the report to go to time-out.. I want to force the user to run it in background only.. How can we do that ? IS it Basis related or .. can it be done in abap ?
Thanking you..
Shankar

Hi Shankara,
Here is what is happening with your logic.
1. User is running the program and got to the selection screen.
2. User enters the selection values and then presses execute.
3. User gets the diaolog box asking him whether the program should be run in the background.
4. User says yes and you are doing the submit of your program.
The problem lies in the step 4 where you are submitting your program.
Remember, when you submit a program, you are supposed to have passed the selection screen data in one of the standard ways of passing the data which is either creating a variant and passing the variant to the job, or use SPA/GPA parameters if relevant or any other method.
Since you are calling your program again within the same program, but without passing the selection screen values, your program is failing. Here is a sample program to achieve what you are trying to achieve.
REPORT ztest.
PARAMETERS: p_vbeln LIKE vbak-vbeln,
            p_bkrun NO-DISPLAY.
DATA: ls_vbak LIKE vbak.
DATA: v_answer,
      v_jobcount LIKE tbtcjob-jobcount.
IF p_bkrun IS INITIAL.
*-- not background processing
    CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
         EXPORTING
              textline1      = 'This may time out.'
              textline2      = 'Do you want to run in background?'
              titel          = 'Warning!!!'
              cancel_display = space
         IMPORTING
              answer         = v_answer.
    IF v_answer = 'J'.
*-- run in the background
      CALL FUNCTION 'JOB_OPEN'
           EXPORTING
                jobname          = 'ZTEST'
           IMPORTING
                jobcount         = v_jobcount
           EXCEPTIONS
                cant_create_job = 1
                invalid_job_data = 2
                jobname_missing = 3
                OTHERS           = 4.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE 'E' NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        EXIT.
      ENDIF.
*-- submit the program in the background
      SUBMIT ztest
        WITH p_bkrun = 'X'
        WITH p_vbeln = p_vbeln
        USER sy-uname
        VIA JOB 'ZTEST' NUMBER v_jobcount AND RETURN.
*-- close the job
      CALL FUNCTION 'JOB_CLOSE'
           EXPORTING
                jobcount             = v_jobcount
                jobname              = 'ZTEST'
                strtimmed            = 'X'
           EXCEPTIONS
                cant_start_immediate = 1
                invalid_startdate    = 2
                jobname_missing      = 3
                job_close_failed     = 4
                job_nosteps          = 5
                job_notex            = 6
                lock_failed          = 7
                OTHERS               = 8.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE 'W' NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      EXIT.
    ELSE.
      CLEAR v_answer.
    ENDIF.
ENDIF.
CHECK v_answer IS INITIAL.
SELECT SINGLE * FROM vbak
                  INTO ls_vbak
                 WHERE vbeln = p_vbeln.
IF sy-subrc <> 0.
    WRITE:/ 'Invalid Order Id.'.
ENDIF.
END-OF-SELECTION.
CHECK v_answer IS INITIAL.
IF p_bkrun IS INITIAL.
    WRITE:/ 'Here is the result running the program in foreground.'.
ELSE.
    WRITE:/ 'Here is the result running the program in background.'.
ENDIF.
WRITE:/ ls_vbak-vbeln,
          ls_vbak-vkorg.
Let me know if you have any questions.
Srinivas

Is there a way to affect the URL used when running a report subscription?

We are using SQL Server 2008 R2. I am finding out that when running a report subscription to extract a file in csv format, an extra blank line is created at the bottom (i.e., extra line feed), and the mysterious BOM characters also get inserted at
the beginning. Both of these "features" are causing problems with a client's import of these files. Of course, it affects multiple clients.
I have done some research and have found information on how to edit the rsconfigserver file to render CSV files using ASCII and to not use Excel formatting. This removes both "features"/problems stated above.
However, editing the server config file will affect all csv extractions on that report server. Is there a way to control the URL of a specific report subscription to include these values (so only the reports that need the fix get it)? For example,
someone gave this URL as an example of how to add parameters including encoding in the URL. http://MyReportServer/ReportServer?%2fReport+Folder%2fReportName&rs:Command=Render&rs:Format=CSV&rc:Encoding=ASCII
Is there a way to have the report subscription run the report using a URL like this so it extracts it without the BOM characters? I was thinking a data driven subscription would allow me to set the values like this, but these parameters are only pertinent
AFTER the report is run and only needed for the final rendering. Not sure how to do this. Maybe it's not possible. If it's not, that's fine. I just need to write a proposal to our DBA's to talk them into making a couple edits to the server config
file.
Has anyone ever worked around this before in SSRS?
Thank you!!
Dana

Hi DanaSSRS,
According to your description, you want to have some report exported into CSV file with ASCII encoding when running a subscription. Right?
In Reporting Services, when we run the subscription, it will call the Render Extension as we configured in rsreportserver.config file, we can't set the Render format with ASCII Encoding on subscription level. As you said, the Render Extension we configured
in the rsreportserver.config will apply to all reports. In this scenario, you only want that extension apply to specific reports. For your requirement, we suggest you add a custom Render Extension in configure file. You just need to copy the CSV Extension
and add a <OverrideNames/> to override a new name. Then set the <Encoding> in <Configure>. And you can select this custom Extension when creating the subscription. This might be the most effective workaround.
Reference:
Customizing Rendering Extension Parameters in RSReportServer.Config
CSV Device Information Settings
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Error when running a report in Discoverer Desktop

All -
I run a report in discoverer desktop and got the following warning message: This sheet currently contains no data.
I generated the query by using the sql inspector tool and run the query in the database and, to my surprise, it showed the correct records.
I don't know what is causing this error.
I checked all items (in discoverer administrator) that are used in by report and everything seems to be ok.
Any idea?
Thanks,
Daniel.

Hi,
There could be many reasons for this, what is in the query you are running?. It could be a bug in your version, what version are you using? Does it happen with one workbook or all workbooks? It could be an NLS Language problem, check that the calculation USERENV('LANG') returns the language you are expecting in Discoverer desktop. It could be a problem with the context for your session, are you using an apps mode or database mode EUL?
Rod West

Graphics don't run in Reports

Similar Messages

Maybe you are looking for