Graphics Firmware update for iMac with with NVIDIA GeForce 7300 or 7600 GT

I am one of the many with an 06 24" iMac that has the graphics card glitch. Downloaded and installed this firmware update today and worked all day with no issues. The update says it is for users that are running Windows 7 in boot camp.
Is this coincidental and the firmware fixed the issue so many of us have with these iMacs with the NVIDIA cards or did I just jinx myself and my problems are bound to return?
Guess I will know soon enough!
http://support.apple.com/kb/DL978

I've seen all sorts graphics problems mentioned. Apple sells millions of Macs per years, so any potential problem is bound to happen to at least a few customers. Assuming that people can read your mind is not a very good way to get responses.
On the other hand, if you describe the problem in detail, people reading the forum and looking for solutions may actually find your post through a keywords search, and your finding about installing the firmware update for Windows 7 may help then too, after confirming their problem is similar to your problem.
But that's up to you...

Similar Messages

IM27-inch imac Firmware update for OS X Lion won't install

Apple just released "iMac Graphic FW Update 3.0," and lists OS X 10.7 as a system requirement.
I downloaded it and attempted to install on my one-month-old 27-inch iMac (2.7 gHz Core i5). I'm running 10.7.1
Unfortunately, I get a message that "This software is not supported on your system."
Any clues as to what the issue may be? Am I missing something simple?
(All other programs were closed.)
Thanks for any tips/advice!
"My first Mac was a IIci 8/80"

Dave,
You are correct. If Software update says it's not needed then it's not needed on the OP's configuration. I was able to find this article however it's not conclusive about which GPU's are affected, it only says Radeon but doesn't nail down specifics.
Graphic firmware updates for iMac

IPhoto 11 and nVidia GeForce 7300 GT

Hi folks,
I have an 2006 white iMac 24" with the nVidia GeForce 7300 GT and there is no way to use my iPhoto 11 without freezing Snow Leopard.
As I can see, everybody with nVidia GeForce 7300 GT are having the same freeze problem.
Anyone have success solving the problem? Apple don't say nothing about it?
Let's get together to Apple hear us!

Have same problem.(24" iMac with nvidia 7300GT) Read all about the very real problem on this discussion group and have done all the suggestions. Notified Apple, etc.
I had brought my iMac to an Apple Genius Bar and they spent a lot of time on it, with results being---"there is a problem" and admitting that it is not with my computer. But they could not tell me anything more (they do not know whether an iPhoto fix is in work).
As I have a large and active library, I could no longer live with this problem.
I bought Aperture. It works wonderfully. The import of my library was flawless. There is a sizeable learning curve and many things are different than iPhoto. I found that Aperture is not only extremely quick but there are a great many useful things that iPhoto does not have. I had previously used Elements for detailed adjustment, but it looks like Aperture can be used for this, and I eventually may also drop Elements.
So maybe this very frustrating problem did end up with a silver lining.
asuch

Can I run two 1920x1200 monitors off NVIDIA GeForce 7300 GT?

Hi.
I have a Mac Pro 2006-2008 fitted with a NVIDIA GeForce 7300 GT 256MB, it has two DVI outputs.
I'd like to attach to it two Dell U2410, 24" 1920x1200, but can't find final proof that the card will support extended desktop on two such screens.
Thanks!

Hi-
Welcome to Discussions!
Yes, the 7300 GT will support two displays at 1920 x 1200.
It has one single link DVI and one dual link DVI
Support for digital resolutions up to 1920 by 1200 pixels; dual-link DVI ports support up to 2560 by 1600 pixels
Extended desktop is supported with all OEM cards.
Dual-display support for extended desktop and video mirroring modes
http://support.apple.com/kb/SP30

IMac freezes with Halo UB game - after graphics firmware update

Hi
The graphics firmware update works good - the couple of things I found to freeze it work fine now.
But I have found one way to get the freeze and black screen plus the ASIC error in the system.log.
Open Halo UB 2.0.2 and set the video options to use 1920x1200. When I have it at 1344x840 or whatever, the game is fine.
But when I try to set Halo UB to 1920x1200, I get the freeze thing. Halo says it has to test the new video settings and says to hit escape if no dialog appears. Once I accept that, then the screen goes black and the freeze hits.
So I'm happy that everything's working good for all the other normal causes of the freeze. Hopefully Apple can now track down this issue.
Anyone else out there have Halo UB to try this out?
Maybe it's my Halo UB install. Mine was a fresh install this morning though.
good luck!
let me know...
thanks!

Freezes with Jedi Academy as well, freezes after iMac update, 10.5.1 install, Firmware Update (which i had to do with Pacifist)...
just Freezes and everything needs to be restarted, haven't tried the HALO thing yet, not sure if i want to push my luck...
r...

Firmware Update for my blackberry 8830 world edition with Bell Canada

Hi does anyone know if there is firmware update for the Blackberry 8830 world edition with the carrier being Bell Canada? I am running version 4.2 and I know there is 4.5 but I am not sure if this applies the my phone with Bell Canada. When I boot up my desktop manager and checks for updates and says that there is no update. I don't want to update if it is not necessary and not be able to run my blackberry. If I am able to update where would I go to get the 4.5 update?

You have to repair Desk Manager or unintall and reintall DM, but this time uncheck "Auto update" and anything that refer to "update" the reason why I mention that is because everythime you run DM, it goes online and check for newer version and put this file "vendor.xml" in the Blackberry Common Folder, and with that file in place, it will block the program from installing the newer version from a difference cell company..
From what I see 4.2 is the only version that is up to date for a 8830...but if you have a 8820, you can update to 4.5.

Is there a firmware update for burning at 16x with Matshita DVD-R UJ 845E?

Is there a firmware update for burning at 16x with Matshita DVD-R UJ 845E? I'm trying to burn a DVD using iDVD on my iBook. The blank DVD's are Memorex 16x (I've used Memorex 8x successfully in the past), the DVD drive is specified above. The finder tells me that the drive has reported an error "sense key=medium error/ sense code=0x73, 0x03" I couldn't find firmware updates in either Panasonic Matshita or Apple websites. Am I forever confined to 8x DVD-R's with this laptop?
ibook G4 Mac OS X (10.4.7)
ibook G4 Mac OS X (10.4.7)

First, welcome to the discussions.
Sorry, No Firmware update to allow you to burn at 16X.
The drive you have is only capable of burning at 8X.
You will also find that for the most part when you recieve errors that it is more often than not attributed to MEDIA.
There are so many problems with the cheaper media they are to numerous to cover.
DVD is not at all like CD burning, in that the technology as well as the Optical Drives used, seem to be touchy, and require the use of good Media. This will allow you trouble free burning without errors.
http://www.digitalfaq.com/media/dvdmedia.htm
You will also find that the reason that DVD-R Media works the best, is because it is the most wirely used and recognised in both Computers and Players.
If I may suggest. There are several 16X DVD's on the market.
Take your time and look at the back of the Jewel Cases and read. You will see that the better Media will tell you that it will burn at 1X through and including 16X, if your drive is capable of handleing these speeds. I prefer Maxell 16X DVD-R Media in the individual Jewel Cases. This Media burns at the slower speeds on the older Superdrives that will only burn at 1X or 2X.
Like many others I have learned my lessons the hard way.
Cheers Don

I am having trouble with a firmware update for my 40ex500 tv. Downloaded update to thumb drive but

Will try again. Am having trouble with a firmware updat for sony 40ex500. Downloaded update to my thumb drive but when inserted in the usb slot on the tv, the sequence to update the tv does not complete. Various service reps have led me to you for resolution. Please advise? Bill Becker

I have a Macbook with Tiger, and OS x 10.4. I had to install a new hard drive.
Run Disk Utility /Applications/Utilities
First, go to your Apple menu then click Software Update...
If no updates are available, check the startup disk using Disk Utility.
Using Disk Utility to verify or repair disks

Does mountain lion comes with graphic, Does mountain lion comes with graphi, Does mountain lion comes with graphic driver updates? I'm currently using snow leopard, and it seems that there's no graphic driver updates for a really long time.

Need some advice

I'm currently using snow leopard, and it seems that there's no graphic driver updates for a really long time.
Snow Leopard is no longer being updated, 10.6.8, was the last update. So, a "really long time," will be forever.
Yes, ML has graphic driver updates, but since there is no way to guess whether it impacts your unmentioned hardware, there is no way your question can be answered.

Graphics Firmware Update 1.0 for Mac Pro 2006?

The official documentation is confusing because Apple lists the 2006 Mac Pro as "incompatible" with Windows 7 here: http://support.apple.com/kb/HT3986 but at the bottom of the same page it states that the update is for the "Mac Pro with NVIDIA Geforce 7300 GT" which is the original card that the 2006 Mac Pro came with. The page makes no reference to the specific model other than that.
Also, the compatibility page for the update here: http://support.apple.com/kb/HT3967 lists graphics "Device ID 0x0393, or 0x009D" as the applicable units, one of which, ID 0x0393, matches the 7300 GT in my 2006 Mac Pro.
Again, no reference to specific Mac Pro generation is made on any page, including the driver download page
here: http://www.apple.com/downloads/macosx/apple/firmware_hardware/graphicsfirmwareup date10imacandmacprocompatibilitywithwindows7.html
only the points I outlined.
Is this an error on the part of Apple or is it for the 2006 Mac Pro?

Marketing seems to write the technical hardware articles lately!
Even though not supported officially, and while Windows 7 Pro 32-bit will only allow 2GB RAM, it does boot and install. 64-bit you have to jump through extra hoops is all.
UEFI made it easier to have a BIOS and/or EFI subset, but UEFI came out 1/2006 and Apple probably settled on EFI32. It wasn't until 2008 that UEFI 2.1 showed in Mac Pro and which marks the "official support" point in time and hardware reference.
I was surprised - dumbfounded - to see the 7300GT firmware update too. And I had to remove mine when installing Windows Vista x64 in the past, and for the RC last year.

Question about imac graphics firmware updates

My Imac model identifier is imac8,1; the machine is a 2.66 GHz Intel Core 2 Duo, with 2 GB 800 MHz DDR2 SDRAM. I am running OS 10.6.7. I have an ATI Radeon HD 2600 Pro graphics card.
Firmware Update 1.0.1 is apparently installed, since my graphics ROM version is 113-82250L-259.
Symptoms occurring within last 6 months or so: Without notice, the screen goes black, though I can detect light “behind” (i.e., it doesn’t look powered off). The only remedy I’ve been able to get to work is to use the power button (or unplug) to turn the machine off. I don’t know whether the system has frozen or not. I’ve looked at the console and system log, but I can’t tell from them what’s happening.
I have reset the SMC and PRAM. The computer passes the extended Apple Hardware Test.
My question: is one or both of the imac graphics firmware updates 1.0.2 (September 10, 2009) or 2.0 (June8, 2011) appropriate for my machine?

If there is an update to your particular graphics firmware, Software Update will let you know; if there is nothing showing there, it means there is no update available for your configuration. Do not simply download from the Apple website and install something that could cause havoc on your machine.
I'm not sure what the problem might be, but it could be graphics card and/or logic board related. Since you've already done the SMC and PRAM resets, unless someone else has another idea, I'd suggest booking an appointment at your nearest Genius Bar for a free evaluation and diagnosis. If the problem is intermittent, take screen shots or video of it so you can show it to them.

Where do I get an SMC Firmware Update for my 21.5 inch Late 2009 iMac?

Hello Apple Support Communities,
I have a 21.5 inch, Late 2009 Intel iMac. Currently it is running OSX Lion. It is also running Bootcamp with Windows 7 Professional Installed. Recently the Hard drive crashed on me and I ordered a new generic Hitachi from an Apple Reseller. I took all the precautions and asked all the questions, but when I finished the hard drive replacement, the fans within the iMac started running on High. The other people in my office Hate this. I did some research and found that there is a firmware update for the SMC that I should be installing. I looked on the webpage where apple directs you to find out if you need this update, but I can't find my exact specs on the page (here is the page for reference: http://support.apple.com/kb/HT1237) I can only find an update for the 27 inch model. I tried running that one and the system tells me "This software is not supported on your system."
Here are the specs that the page requested me to find:
Model Identifier:          iMac10,1
Boot ROM Version:          IM101.00CC.B00
SMC Version (system):          1.52f9
Someone please help, this has been bugging me for a while.

I took all the precautions and asked all the questions,
Then I trust you saw this before you did the replacement. Apparently, it's not just a question of getting a drive from the same manufacturer to use with the proprietary cable.
http://blog.macsales.com/2751-proprietary-cable-can-put-the-brakes-on-upgrading- late-09-imacs
It's acting as if the temp sensor is not connected. I have it bookmarked amidst thousands of bookmarks but can't remember the name right now. There is some program out there that, in the absence of getting data from the internal sensor, will regulate the fan speed based on the SMART temp. If I think of it, I'll post back.
Here it is. It's meant for the 2011 iMac Apple drives, but I don't see why it wouldn't work in your situation.
http://www.hddfancontrol.com/
BTW, I think John Galt is thinking of the 2011 iMac drives, not the late 2009s, which are not quite as impossible.

IMac PowerPC G3 Firmware Update for Tiger Install

I have an iMac PowerPC G3 that was purchased with a slot DVD and Mac OS 9 installed. I upgraded to Mac OS X 10.2.8 with one problem, ie., can't use the copy and scan functions on my Epson Stylus CX5200 All-In-One Printer. I learned, recently, those functions only work with Mac OS.9. Additionally, I purchased the Tiger operating system and upon installing, I learned I need a firmware update which can only be installed in Mac OS 9. Do I really need to reinstall Mac OS 9 to install the firmware update for installing the Tiger operating system and to use the Epson copy and scan functions?
Any assistance will be appreciated.
SusanRup

i don't really know susan. it seems odd to me to have to have os 9, and that it couldn't be done in the later operating system. sorry, but i thought you were thinking you would have to erase the os x, install os 9, do the firmware update, and then install os x again:) what i would do i guess is contact epson. they should know exactly what you have do.|:)]

I have a imac with a NVIDIA GeForce GTX 780M 4096 MB 32 GB CUDA grayed out Can somone help?

I have a imac with a NVIDIA GeForce GTX 780M 4096 MB 32 GB I downloaded the CUDA Driver Version: 6.5.46 but I still dont have the option in after efects to use the CUDA for beter permance ? Can somone help?

Hi Nick,
Nick Politis wrote:
I have a imac with a NVIDIA GeForce GTX 780M 4096 MB 32 GB I downloaded the CUDA Driver Version: 6.5.46 but I still dont have the option in after efects to use the CUDA for beter permance ? Can somone help?
After Effects uses your CPU and RAM Primarily, not the GPU.
You only need NVIDIA CUDA for one function: the acceleration of ray-traced 3D compositions. Your newer Maxwell NVIDIA GPU does not contain the OptiX Library necessary for this function so it will not ever work for accelerating ray-traced 3D compositions. Sorry.
The After Effects team is no longer working on this feature and suggests that you use Cinema 4D Lite (bundled) for your 3D work instead. There are also some great third party options for adding 3D elements to After Effects compositions like Invigorator Pro and Video Copilot Element 3D.
Hope that clears things up.
Thanks,
Kevin

TS3824 How can we install the iMac Graphics Firmware Update if the screen is white and I can't get to the Apple menu?

How can I install the iMac Graphics Firmware Update 2.0, if the screen is white and I can't get to the Apple menu? My computer has 5 vertical purple lines against white screen at startup before the Apple logo appears and the spinning gear...then everything disappears and the screen hangs on the white screen. I have tried unplugging and removing all my peripherals and the COMMAND, OPTION, P & R set of keys and still nothing. I have tried COMMAND C to start up from cd and it only tells me to turn off the computer and turn it back on. I found information on Apple's Support pages regarding the iMac Graphics Firmware Update but I am unable to download and install if I can't get to the Apple menu. Can anyone help?

You may have hardware problem, I think a visit to your local Apple Store or AASP is in order.

Graphics Firmware update for iMac with with NVIDIA GeForce 7300 or 7600 GT

Similar Messages

Maybe you are looking for