Graphics Issue since upgrading to 8.1

So after my computer restarted itself and installed the 8.1 update, i have been having graphics problems.
I'm an online gamer and play mostly mmo's, it is with these that this update seems to effect the most, one in particular i cant even see as it duplicates everything into 3 colors, making game play impossible. in other games its made the graphics more pixle
where before they where smooth.
Its not just the games its effected also images on my computer are more pixle and have colors in them they never had before.
I have had this issue before but restored my computer to factory settings to remove the update, but now my computer has forced the update on me for some reason. I refuse to restore my computer again as it was a huge hassle last time and it will more then
likely do the update again on its own anyway.
If anyone has any ideas or know how to fix this please let me know, as this is really frustrating and would love to be able to get back to my gaming.
(will be adding ss shortly)

okay i managed to fix the issue with the graphics on archeage, everything no longer appears multiplied in different colors.
but i am still having the pixle issue.
But now i have also discovered a new problem and thought it wouldn't hurt to post it here also.
My mouse has become supper sensitive when playing my games, one little touch when trying to rotate the screen sends it into a frenzy and i end up looking at the sky or my characters feet. i didn't notice this before as i didn't even attempt to move with
the multiple color images everywhere. Also when holding down my screen rotation button it continues to rotate in that direction even though i am no longer moving the mouse that way. 
I did notice that there was a patch for mouse issues so i tried to install it but it said i didn't have the requirements for it, so i assume it was included with the 8.1 update.
I have tried adjusting the settings in the games for mouse sensitivity, and it does not effect it, i even tried to adjust the computers but could not find the setting for what i was after. The mouse rotation button is holding the left or right mouse button
down and moving the cursor in the direction you want it to move. i couldn't see anything there that can help with that as the cursor speed is fine, its only happens when i try to rotate the screen.
Any help on this and my pixle issue would be greatly appreciated!

Similar Messages

  • Performance issues since upgrade

    I am on a late 2011 MacBook Pro and am having severs performance issues since upgrading to Mavericks. I fear my issues may be related to company installed anti-virus (which I cannot remove), but I was hoping someone could look over my EtreCheck for other potential solutions.
    One really odd issue I am having, which I cannot seem to find good information for on Google, is at least 4-5 times a day my Mac just stops. No beach ball, no anything, for about 1-5 minutes. Then it's fine. Maybe just me grasping at straws, but it seems related to a when webpage loads a bunch of images? I always use Safari btw, but testing other browsers, like Chrome & Firefox, it happens as well.
    I have also removed TotalFinder and have noticed no improvement and still have the above issue.
    Thanks in advance!
    Here is my EtreCheck:
    Problem description:
    slow performance on Mavericks
    EtreCheck version: 2.0.11 (98)
    Report generated November 11, 2014 at 8:51:26 AM EST
    Hardware Information: ℹ️
      MacBook Pro (17-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,3
      1 2.5 GHz Intel Core i7 CPU: 4-core
      8 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 512 MB
      AMD Radeon HD 6770M - VRAM: 1024 MB
      Color LCD 1920 x 1200
      LED Cinema Display 1920 x 1200
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 0:46:22
    Disk Information: ℹ️
      APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 749.30 GB (256.69 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MATSHITADVD-R   UJ-8A8
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Fitbit Inc. Fitbit Base Station
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple, Inc. Keyboard Hub
      Apple, Inc Apple Keyboard
      Tablet PTZ-630
      Logitech Logitech USB Headset
      Apple Inc. Display iSight
      Apple Inc. Apple LED Cinema Display
      Apple Inc. Display Audio
      Apple Computer, Inc. IR Receiver
    Firewire Information: ℹ️
      Iomega HDD unknown_device 800mbit - 800mbit max
      S.M.A.R.T. Status: Verified
      disk1s1 (disk1s1) <not mounted> : 32 KB
      Iomega HDD (disk1s3) /Volumes/Iomega HDD : 500.04 GB (22.88 GB free)
      Files (disk1s5) /Volumes/Files : 499.90 GB (416.87 GB free)
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Anywhere
    Kernel Extensions: ℹ️
      /Library/Application Support/Symantec/Protector
      [not loaded] com.symantec.kext.protector.panther (1.0f5) Support
      [not loaded] com.symantec.kext.protector.tigerplus (1.0f5) Support
      /Library/StartupItems/SymAutoProtect
      [loaded] com.Symantec.kext.SAVAPComm (11.0.6) Support
      /System/Library/Extensions
      [loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
      [loaded] com.InnovationTechnology.driver.ComputerAudio (1.01 - SDK 10.7) Support
      [not loaded] com.cisco.nke.ipsec (2.0.1) Support
      [not loaded] com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) Support
    Startup Items: ℹ️
      CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
      NortonMissedTasks: Path: /Library/StartupItems/NortonMissedTasks
      SMC: Path: /Library/StartupItems/SMC
      SymAutoProtect: Path: /Library/StartupItems/SymAutoProtect
      SymProtector: Path: /Library/StartupItems/SymProtector
      Startup items are obsolete and will not work in future versions of OS X
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.CS5ServiceManager.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [running] com.jamfsoftware.jamf.agent.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [running] com.symantec.quickmenu.application.plist Support
      [running] com.wacom.wacomtablet.plist Support
      [running] net.juniper.pulsetray.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [running] com.fitbit.fitbitd.plist Support
      [running] com.fitbit.galileod.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [running] com.jamfsoftware.jamf.daemon.plist Support
      [not loaded] com.jamfsoftware.startupItem.plist Support
      [loaded] com.jamfsoftware.task.1.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [loaded] com.rogueamoeba.instanton-agent.plist Support
      [running] net.juniper.AccessService.plist Support
      [loaded] net.juniper.UninstallPulse.plist Support
    User Launch Agents: ℹ️
      [loaded] com.valvesoftware.steamclean.plist Support
      [running] ws.agile.1PasswordAgent.plist Support
    User Login Items: ℹ️
      gfxCardStatus Application (/Users/[redacted]/Downloads/gfxCardStatus.app)
      Dropbox Application (/Applications/Dropbox.app)
      Microsoft Database Daemon Application (/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app)
      cdn Volume (/Volumes/cdn)
      TotalFinder Application (/Applications/TotalFinder.app)
      SAVDiskMountNotify Application (/Library/Application Support/Symantec/AntiVirus/SAVDiskMountNotify.app)
      ScanNotification Application (/Library/Application Support/Symantec/AntiVirus/ScanNotification.app)
      SymSecondaryLaunch Application (/Library/Application Support/Norton Solutions Support/Scheduler/SymSecondaryLaunch.app)
    Internet Plug-ins: ℹ️
      OfficeLiveBrowserPlugin: Version: 12.3.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.223
      AdobePDFViewer: Version: 10.0.2 Support
      Unity Web Player: Version: UnityPlayer version 4.5.4f1 - SDK 10.6 Support
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
      AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Support
      iPhotoPhotocast: Version: 7.0
      DirectorShockwave: Version: 11.5.9r620 Support
      QuickTime Plugin: Version: 7.7.3
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      Silverlight: Version: 4.0.60310.0 Support
      MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
      net.juniper.DSSafariExtensions: Version: (null) Support
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 2.3.1.2 Support
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
      WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
      SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
      WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
    User Internet Plug-ins: ℹ️
      SOEWebInstaller: Version: 1.0 - SDK 10.5 Support
      Aspera Web 3.1.2.72265: Version: (null) - SDK 10.6 Support
    Safari Extensions: ℹ️
      1Password
      Adblock Plus
      Reddit Enhancement Suite
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Flip4Mac WMV  Support
      Java  Support
      MacFUSE  Support
      SymAutoProtect
      Symantec\nQuickMenu  Support
      WacomTablet  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Destinations:
      Iomega HDD [Local]
      Total size: 500.04 GB
      Total number of backups: 37
      Oldest backup: 2014-10-14 14:11:11 +0000
      Last backup: 2014-11-11 13:27:48 +0000
      Size of backup disk: Excellent
      Backup size 500.04 GB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
          36% com.apple.WebKit.Plugin.64
          34% SymAutoProtect
          13% WindowServer
          9% Unity
          4% Activity Monitor
    Top Processes by Memory: ℹ️
      455 MB Safari
      361 MB com.apple.WebKit.Plugin.64
      292 MB Unity
      77 MB com.apple.WebKit.Networking
      77 MB com.apple.WebKit.WebContent
    Virtual Memory Information: ℹ️
      2.08 GB Free RAM
      2.39 GB Active RAM
      1.34 GB Inactive RAM
      1.40 GB Wired RAM
      1.11 GB Page-ins
      5.54 GB Page-outs

    Activity Monitor - Mavericks  also Yosemite
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy

  • Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS

    Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS. Animation I was working on that had been performing in browser fine suddenly stopped working, and was not related to any action I had done at that point. Also was working in it today and program stopped responding to key board short cut commands.

    I am having a whole slew of odd interface problems with a fresh 2014.1.1 on a fresh macbook pro with latest Yosemite. Program locks up, cursor selections don't show, things disappear. I have a mac mini also and the program runs fine on it. Is there possibly something related to the solid state hard drive in new macs?

  • FontBook issues since upgrading to Mavericks

    Since upgrading to mavericks when i try to install new typefaces (.otf, work perfectly on my other computers which are running on mountain lion). They do not show up in font book. Even when I manually add them to the Fonts folder, they still do not show up in Font Book or any of my applications. As a graphic designer, this is obviously a huge issue for me.
    Not to mention, this isn't the only problem I have since upgrading. For example all of my adobe programs are suddenly riddled with bugs (issues resizing assets, drop down menus dissapear, etc). I have been trying to trouble shoot several issues for a while now with no solutions. All of the problems I have seem to be experienced by other users. It's very frustrating to me that the new OS is so buggy. I have never had this problem before when upgrading products.

    One of the users just upgraded and is having this issue as well. I told him to use Firefox as that browser has no problems. This is a workaround at best as the Apple Store is still inaccessable. I believe the problem lies with Safari's implementation of SSL as normal http:// sites load, albeit very slowly. Any sites that use https:// are unavailable.

  • Messages App| connectivity issues since upgrading to Mavericks

    is anyone having problems since upgrading to Mavericks with connectivity issues in the "Messages" app? Im on a 2011 MacBook Pro. I will start a desktop share session with my folks (IMAC) and within 2-3 minutes of having access to their desktop, I'm unable to control any longer and their system freezes.

    HI,
    When iChat 3 came out someone tested whether it would work on the platform that was running iChat 2 and also tested whether iChat 2 would work on the later OS.
    This eventually led to the Reinstall procedure for iChat 3 up to the iChat 5 version.
    Since then the app has required either a Backup version from when it was working, a copy on another machine running the same OS and app version numbers (the two go hand in hand) or you have to Reinstall the whole OS which will always update you to the latest version of the OS (and in the case of Messages any updates it has had).
    8:01 pm      Saturday; December 21, 2013
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Database connectivity issues since upgrading to 2011

    I have several reports that were created in CR 2008.  Since upgrading to 2011, none of them connect to the SQL server when I try to refresh the data.  The error message says invalid logon.  I can get the reports to refresh if I follow this process:
    1.     Close the report
    2.     Delete connections to the SQL server
    3.     Close CR
    4.     Open CR
    5.     Create a new blank report and connect to the same data source as the failed report
    6.     Open the report that was failing
    7.     Refresh the data
    Everything works at that point.  Once I close CR, next time I access the report I have to go through the entire process again.  Saving the reports after successfully establishing a connection does not fix the issue.  I have reset the data source location from the database menu as well as established new system and file DSNs.  Any help would be greatly appreciated.
    Thank you,
    Darren

    Hi Darren,
    What I meant for version of CR 2011 is to click on Help About... you'll see the version number there.
    Interesting, So if it fails in the ODBC Admin test then of course it's going to fail in CR Designer, CR simply uses what connection info you specify in the DSN or in the file. If you can get the DSN to work non-kerberose then adding that configuration to your File DSN should allow CR to work also.
    Couple of possibilities, Older versions of CR ignored the security configuration, or at least this one test, and it was fixed in CR 2011, or possibly the File DSN needs to have the security type enabled through the connection property. Check MS for help on what the info in the line is to enable it.
    Another possible solution is according to this MS Kbase they recommend that you use Kerberose...
    http://support.microsoft.com/kb/909801
    So the result is, Set Kerberose on the Server or find out how MS will support non-kerberose security client side and see if that works. But because MS recommends using it discuss with your DBA and recommend to all to enable it and use it.
    Thanks again
    Don

  • Screen Issues since upgrading

    Since upgrading to `lion,  my 2007 Macpro often runs very hot and also I have been experiencing some screen issues (hangs, on reboot get a pink and grey check effect, wont boot)
    Support center advised on some resets and a re-install of Lion.  However although this has 'reduced' the effect it still occurs
    Any advise or similar experiences

    If it runs better in your Guest account, then something in your admin account is getting in the way.
    Probably not a systemwide issue.
    The first place I'd look is in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+). Don’t just “hide” them by checkmark.
    Running at max RAM shouldn't be a problem in Mavericks, as it handles memory more efficiently than previous systems, also you have virtual memory and you have a good amount of free disk space for it.
    http://www.apple.com/osx/advanced-technologies/
    That said more RAM is always better but I can understand why you wouldn't want to spend the money on the Mini at this point.

  • Proxy Issues since upgrading to Mavericks

    I use my Mac Mini (Model 5,1 Core i5, 2.3GHz) at work and run windows using VMWare. Since upgrading to Mavericks I cannot get OSX to connect to the proxy server. I am using the same settings as I used in Mountain Lion, which worked fine. I do not have any problems with Windows connecting.
    I can see the internal network, access files and printers, but cannot get through the proxy server to the internet. Oddly enough Dropbox on the Mac works fine through the proxy server so I have to think its a problem in Mavericks.
    I have tried changing settings including manually entering proxy info for all protocols under network settings.
    Unfortunately the IT guys only support Windows (which is working) so I am on my own on the Mac side.
    Anyone else having a problem or have a solution (besides waiting for an update)?

    One of the users just upgraded and is having this issue as well. I told him to use Firefox as that browser has no problems. This is a workaround at best as the Apple Store is still inaccessable. I believe the problem lies with Safari's implementation of SSL as normal http:// sites load, albeit very slowly. Any sites that use https:// are unavailable.

  • CFMail Issues since Upgrading to CF10

    Ever since upgrading to CF10, we've been having some odd issues with our automated ColdFusion emails.  The processes always functioned properly in the past, but lately we've been getting some very out of the ordinary issues which I'll describe further below.
    We discover the problem usually from contacts who usually receive these emails on a daily basis with or without attachments.  We'll go to the CFMAIL directory for the corresponding server and find a slew of emails stuck in the 'Undelivr' emails.  In some cases, we can just move these emails to the Spool folder and they process fine, but in most cases they result in one of the two errors below:
    Error 1: In an email which normally does not contain a body and contains an attachment, the follow error is what we found in the logs:
    "Error","scheduler-1","01/15/13","14:09:56",,"javax.mail.MessagingException: missing body for message"
    javax.mail.MessagingException: missing body for message
                    at coldfusion.mail.MailImpl.createMessage(MailImpl.java:696)
                    at coldfusion.mail.MailSpooler.deliver(MailSpooler.java:1295)
                    at coldfusion.mail.MailSpooler.sendMail(MailSpooler.java:1197)
                    at coldfusion.mail.MailSpooler.deliverFast(MailSpooler.java:1657)
                    at coldfusion.mail.MailSpooler.run(MailSpooler.java:1567)
                    at coldfusion.scheduling.ThreadPool.run(ThreadPool.java:211)
                    at coldfusion.scheduling.WorkerThread.run(WorkerThread.java:71)
    Placing these emails that have always been sent out this way in the past without an attachment in the spool directory causes it to go right back in the 'Undelivr' folder and resulting in the same error.  We ended up having to modify the email file and add random content in the body message, place it back in the spool directory, and it went through.  - Mind boggling.
    Error 2:
    "Error","scheduler-2","02/04/13","09:08:17",,"javax.mail.MessagingException: Exception reading response;   nested exception is:
    java.net.SocketException: Connection reset"
    Both errors occur randomly and we have not been able to find out what causes them randomly from time to time.  All other emails go through fine, but certain emails will never go out and end up in the 'Undelivr' folder. 
    We are running them on Windows Server 2008 64bit.

    Peter, thanks for your suggestions however, the receipients in our email are either customers or internal users; which in any of the email issues we've been having, an invalid email address was not the cause.  Also, to note - these are not marketing emails.
    Just standard batch notification emails, e.g., order / warehouse notification, daily automated processes, etc.  I do wish it were something that simple to resolve these email issues once and for all.
    One other possible cause I've been looking at is "TCP/IP Port Exhaustion" - More info here http://msdn.microsoft.com/en-us/library/aa560610%28v=bts.10%29.aspx
    However, not sure how to exactly prove this to be the cause. 

  • WorkGroup Manager issues since upgrading to OS X Server 10.4.1.10

    Hi all.
    Since upgrading our XServe [Dual 2.3GHz PowerPC G5, 6GB RAM] to OS X Server v10.4.1.10 I have had an issue where I have to quit the program and relaunch to be able to "see" a newly created network home folder. I need to view it under the Sharing tab so to assign the correct permissions since that has no longer worked since upgrading to server version 10.4.7.
    Long story short is... we have our students home folder on the XServe and their preferences are managed via WGM but they use the Active Directory server for authentication. Basically our school district wanted to create a student account once and be able to use it for Windows or Mac's. Therefore, I export a user from the AD server and import the user into the Mac server ( LDAP domain) and things worked fine 2 years ago when the server was set up but now we have this... any thoughts would be appreciated.

    What was the upgrade from?
    What optical drive model?  (There may be a firmware update on the Apple downloads to deal with Tiger.)
    You might also try an NVRAM reset, as NVRAM is read early, by the machine’s boot firmware, and going back to ground zero can help.  To reset NVRAM, you need to boot into Open Firmware by holding down the cmd-option-O-F key combination until you get the white Open Firmware terminal screen.  Once you are there, enter the following three commands:
    reset-nvram <enter>
    set-defaults <enter>
    reset-all <enter>
    The last command will cause the machine to reboot.  When you next boot, the firmware will generate a new device table and maybe cure the problem.

  • ISight/Quicktime issues since upgrading to Lion

    Hello,
    I have tried everything but I can't seem to come up with a solution.  Problems have arose ever since upgrading to Lion on my early-2008 Macbook Unibody.  I have seen many users on this board saying that Lion has broken their iSight as well.  Here are my issues.
    iSight
    - seen in System Profiler (Hooray)
    - cannot be seen by any application
    - does not work with any other user
    Quicktime
    - fails for screen recording, audio recording, and video recording ("The Operation Could Not Be Completed")
    - can play movies just fine
    Solutions I have tried
    1.  Uninstalled everything 3rd party
    2.  PMU reset (several times)
    3.  Repaired Permissions
    Any other assistance would be greatly appreciated.  Cheers.

    • If Apple's http://support.apple.com/kb/HT2090
       suggestions do not help you, (are you certain that you used
       the correct "reset" procedure?) continue with the following.
    • Use Disk Utility to repair permissions and then
       download and apply the 10.7.2 Combo Update:
         http://support.apple.com/kb/DL1459
    • Repair permissions again immediately following the system restart
       that completes the Combo update.
    Properly applying the Combo version of updates
    can sometimes correct problems like yours.
    Message was edited by: EZ Jim

  • Title Format Issues Since Upgrade to Windows XP Internet Explorer 8

    Users' old PCs: Windows 2000 Internet Explorer 6
    Users' new PCs: Windows XP Internet Explorer 8
    My users are having a problem with the title layout of their Discoverer Plus reports ever since they had thies PC upgraded from Windows 2000 Internet Explorer 6 to Windows XP Internet Explorer 8. One aspect of their titles is that they have an &parameters in the title. The values for this one paramater has dozens and dozens of paramater values. For example: Project # 1, 2, 3, 4, 5.......87. That's what they want to appear in their title screen, all those project #s. The core of the problem is this list of values going across their title screen is no longer wrapping to the next line since they moved to XP IE 8. It's forcing this long list of project #s to be all on one line (cutting off the list of projects when it reaches the end of the page).
    When my users were on Windows 2000 Internet Explorer 6, the project values would wrap to the next line without any problem (creates 4 or 5 lines of project #s). They have been having the title issue since their PCs have been upgraded to Windows XP Internet Explorer 8. When I edit the header from a 2000 IE6 machine (where it works from), the font is Arial. But, if I edit the header on an XP IE8 machine the font says dialog and the wrapping doesn't work. If I try to change the font to Arial, hit ok, nothing changes and it seems to reset back to dialog when I go back in to edit.
    Anyone else have this problem or know of a solution?
    Thanks!
    Edited by: user527082 on Jul 7, 2010 2:28 PM

    Hi
    Not all versions of Discoverer are certified for use with IE8. You will find this note on Oracle Support (https://support.oracle.com/CSP/ui/flash.html) very useful: 233047.1
    In there it states that only Discoverer 11g and Discoverer 10g (patched up to 10.1.2.3) are certified with IE8. Discoverer 10g (10.1.2.2 and earlier) is certified for IE6 and IE7 but not IE8 and Oracle has no plans to certify 10.1.2.2 with IE8.
    Older releases of Discoverer, prior to 10.1.2, are generally only certified for IE6.
    Best wishes
    Michael

  • N97 RSS update issues since upgrading to v21

    Hi Since upgrading to the V21 firmware on my N97, if the phone powers off for any reason, my RSS feeds default to not automatically updating. I have to go to each feed and reset the update schedule each time I run out of battery or change to my backup battery. Im using the built in RSS reader that you configure through the "Web" browser application. I am using this to display 3 feeds as widgets on the home screen. has anyone else experienced this or have any suggestions.

    I have found a workaround:
    The problem with RSS feeds disabling their auto-update setting only happens when you switch off the phone using the power button.  If you power down by dropping out the battery the auto-update settings stay enabled.

  • Graphic Distortion Since Upgrade to Yosemite

    I finally updated to Yosemite today. Since then, I am having the same issue as I have seen other posts about regarding the graphics. They are quite pixely and on other images (such as on Pinterest), there is a bunch of random different colors on certain pictures look awful. I have not had this issue prior to the upgrade. too.
    The problem also exists on my browser bar too. Not sure what happened, but I don't like it.

    There are definite bugs in Yosemite that need to be addressed by Apple. Multiple people are experiencing Wifi issues with fresh installs of Yosemite.
    I was experiencing consistent Wifi issues after a fresh install of Yosemite.  I validated that it wasn't my computer or router by doing a fresh re-install of Mavericks.  Wifi works flawlessly under Mavericks but always fails under Yosemite. No other software was installed as part of this test.
    Here is my configuration:
    Model Name: MacBook Pro
      Model Identifier: MacBookPro8,1
      Processor Name: Intel Core i5
      Processor Speed: 2.4 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache (per Core): 256 KB
      L3 Cache: 3 MB
      Memory: 10 GB
      Boot ROM Version: MBP81.0047.B27
      SMC Version (system): 1.68f99
      Serial Number (system): C2QGV006DVHJ
      Hardware UUID: XXXXX
      Sudden Motion Sensor:
      State: Enabled

  • Connectivity issues since upgrading to Snow Leopard

    Hello folks.  Sorry to dredge up bad memories, but I upgraded my old MacBook Pro (2.5 GHz Intel Core 2 Duo) from 10.5.8 to 10.6.3.  AirportX firmware update ran at the same time, now my network shows as connected, but I can't connect to mail or Internet.  It was supposed to be an interim step so I could go to a more current o/s via online download, but obviously that's not an option right now.
    The Airport is green, I show as having a connection to the network, but nothing works.  I've restarted both MacBook and Airport, reinstalled SL, still nothing.  There's no antivirus on board, and no sharing set up, which I gather were common issues back when the rest of you were encountering this issue back in 2009... Didn't occur to me it wouldn't have been patched long since.
    Any suggestions?

    Same problem here - the MobileMe sync never completes. I've checked syncing from my iPhone back to the Me.com web site, and that is fine. So the problem seems to be between my newly-upgraded 10.6 Mac and the MobileMe "cloud."
    Best I can tell, the hangup is with calendar sync. Here's what the Console log tells me:
    8/29/09 9:20:30 AM com.apple.syncservices.SyncServer[2162] 2009-08-29 09:20:30.085 iCalExternalSync[2183:903] [ICalExternalSync ]The sync server failed to let client iCal pull changes
    And the mobilemesync.log says this:
    2009-08-29 09:25:20:858|35a2b00|Error|Sync cancelled for dataclass com.apple.Calendars while merging changes in Sync Engine: Session <ISyncConcreteSession: 0x10274b8f0> cancelled. lost connection to SyncServer
    Could it just be traffic? That seems unlikely.
    I've already tried to "Reset Sync Data" under "Advanced" in the MobileMe Sync preferences - I told the sync to replace everything on my computer with info from MobileMe. That didn't fix the problem.
    My last successful sync was right before my upgrade from 10.5.8!
    Ideas?
    -Barry

Maybe you are looking for