Graphics move when changing computer

I worked on a large Pages document at home last night (PowerMac G4 MDD), brought the document in today, and when I opened it up on my office computer (G5 PowerMac), all the figures had moved into completely different positions. Just upon opening the document.
Why would this occur?

Is it possible that the typeface you used to create the document on Computer #1 doesn't exist on Computer #2? That's one reason the type would shift.

Similar Messages

Graphics move when adding filters

I'm having strange things happen when using graphics.
When I add a filter eg GausBlur my graphic moves down when adjusting blur. I also get this when I apply other filters as well, but usually when I add a second filter/plug to the graphic.
I'm on a macpro dual quad, 16g ram and all apps are up to date
Cheers

The graphic shift has nothing to do with Blackmagic--that's a bug (or at least an issue) with Premiere itself.
It's pretty simple to replicate. Plop a Drop Shadow effect on a title (or other alpha graphic), followed by a Gaussian Blur (or Fast Blur) effect. You can first see the shift just by swapping the order of the effects; they can be left at detent, and simply changing the relative positions of the effects will cause the graphic to jump.
If Drop Shadow is above Gaussian Blur in the effects stack, even with GB set to 0, changing the Softness parameter of DS will shove the graphic down and to the right.
If Gaussian blur is above Drop Shadow in the effects stack, even with DS set to 0, changing the Blurriness parameter of GB will shove the graphic down and to the right. However, in this case, you can mitigate that negative effect by ticking the Repeat Edge Pixels option in GB. No matter what you move, the graphic will stay where it should. This doesn't work in the other scenario, however.
My understanding of this--though I'm not sure whether it's a bug or a functional limitation--is that when you're adjusting these softness parameters for either effect, you are altering the clip's dimensions via the alpha channel. That's why ticking the Repeat Edge Pixels option stops this; it clamps the alpha channel to the original image's dimensions. As you adjust these parameters, the alpha channel's dimensions bloom/grow larger, and this changes the clip's anchor point, causing the shift.
Obviously, this isn't right, no matter how you slice it, but I suspect that simply saying it's a bug is not really getting to the heart of the matter. I imagine there are some larger underlying issues with the way Premiere Pro handles alpha channels and effects that manipulate them that would have to reworked first. In other words, this is probably not something you'll see in a point update; it will likely require a new version of the software to see a true fix.

Satellite M40: Graphic Errors when changing screen resolution

Hi,
I have a Satellite M40 and a big problem.
in windows xp pro sp2:
when a program changes the screen resolution, the screen gets messed up,
I see only stripes and only a restart can get it back working (or suspend to disk).
[edit]
I plugged an external monitor to the laptop and it works,
the laptop screen is full of lines and the 2nd monitor shows what the laptop screen should normally also show
[/edit]
in linux:
this can be also seen when changing from the xwindow mode in linux back to tty(1-6)
Here are some pictures of this strange behavior:
http://www.ronnylindner.de/extern/images/toshiba/screen1.jpg
http://www.ronnylindner.de/extern/images/toshiba/screen2.jpg
http://www.ronnylindner.de/extern/images/toshiba/screen3.jpg
It looks like a hardware problem, but could it be just a wrong bios setting?
What can I do?
Bye and thanks in advance, Ronny
Message was edited by: [email protected]_DE

I will try it with the Toshiba graphics driver, at the moment I use the newest Omega driver
I use 1280x800 as normal resolution
programs giving this error:
world of warcraft (1024x768) -> working with 1280x800
age of empires 2 (800x600)
as I said before, I get this problem also using Suse Linux when I switch from KDE to tty
thanks you too, hope we can get it working together :-)
[edit]
strange, using the Toshiba display driver I got the problem at the first try (aoe2), but now it is not reproducable :-(
[/edit]
Message was edited by: [email protected]_DE

Sequence moves when changing clip speed

Whenever I edit an individual clip's speed, the sequence in front of it gets moved backwards or forwards. It even moves the sequence markers! How do I get rid of this, so only the clip grows and shrinks, without affecting the space around it?
Thanks.

Michael Patten1 wrote:
this is a mediocre work around. I have cross dissolves and and filters attached to my clips. Either method, I have to do band-aid work to keep my sequence unaffected.
You have been provided, promptly and free of charge, the only viable solution by a patient and knowledgable Final Cut user. I believe the proper English expression would be "Thanks, but..."
Curiously, this change in FCP's speed adjustment—known as rippling—was changed sometime between FCP2 and FCP5, can't recall when exactly. It was apparently made at the behest of Those Who Decide Such Things. People like me howled in protest. IN FCP7, you have a choice in the speed dialog to ripple or not.
bogiesan

Rules move when changing length in InDesign CS5

Whenever I change the length of rules in CS5, the rule will then proceed to jump around on the page. Is this some simple setting I'm overlooking? Really slows down workflow when you have to change a rule length and then go and move the rule back to where it was. Any help will be appreciated. Thank you.

How large a change are wi talking about here? Small enough that it might be accounted for by something like an end cap on the stroke, or some larger random number?
Is it happening in all files, or just this one? If it's just this one, try Remove minor corruption by exporting but if it happens in all files and trashing the prefs didn't work I'm stumped for the moment. Can you post a link to a sample?
Just for fun, set Live Screen Drawing to Delayed. I don't think it will make a difference if you aren't using the mouse, but it's worth trying.
And are you using the Selection tool (black arrow) or Direct Select tool (white arrow), to select the rule?

OSX on external drive - MAS apps damaged when changing computer

hi,
i have my osx mountain lion installation on an external harddrive (ssd, thunderbolt connection)
and i'm doing it for a long time without problems. everyday i change the computer 2 or more times.
home -> office -> home ....
since a couple of days a lot of apps puchased in mac app store dont start anymore. the icon
bumps just once, the login window "you didnt buy this app on this computer ...." pops up. this is
ok, i login and then - some seconds later an error popup pops up.
e.g.
“Renamer.app” is damaged and can’t be opened. Delete “Renamer.app” and download it again from the App Store.
app deleting and downloading/installing agian works. until i connect on the next computer. then
the **** starts again.
this unusual work process worked all the time, so i dont know waht to do. downloading and installing
apps all the time, twice a day cant be a solution.

i just startet a test.
1. clean mountain lion install on a new external usb hard drive
2. after all the only thing i did was to login into mac app store and reload 2 of my purchased apps
3. apps work
4. shutdown and start the hd on another mac
5. apps dont work with the described error
6. shut down and start again on the first mac
7. apps work
the problem was suddenly there, no updates or upgrades in the last time. the apps worked
after upgrading to 10.8.2. and suddenly nothing works anymore. in my opinion this must
be a mac app store bug. it would be very strange if so many apps from one day to another -
without updates - dont work anymore.

Images move when changing document setup

Can someone explain why when I change the document set up from "facing pages" to single pages the images on the page, with the exception of the one that bleeds on the outside edge, all shift to the right by about half of an inch.
Screen captures attached.

That's pretty strange. That said, if there were guides that things snapped to, and layout adjustment is turned on, it could be a factor, as could unbalanced margins (you're essentially switching from a left to a right page here), though I thinnk that last is pretty unlikely.
As a workaround, do they stay where they blong if grouped?

I have photoshop elements3 istalled and have ltos of pictures. Recently changed computer that has windows 8 and problems with some of my photos in that some of these have voicce comments that now cannot connect. Same applies to some 'movie pictures

currently have elements 3 and recently changed computer that has windows 8 installed. my store of pictures - some appear to be 'corrupted' in that I can see a icon for the picture but no true picture. Also some of the pictures have a my voice message that now is not available. Also, some are movie pictures that again an icon but nothing else

If you could remove the card without destroying the laptop, you would then be able to see if the integrated Intel chip works
Do you currently have the Intel chip turned off in the BIOS... or are you using the switchable graphics feature?
If you ARE using switchable graphics, that MAY be your problem
Dual video laptop problems... ignore this if you have the Intel chip turned off in BIOS
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

If I purchased a movie, from a computer a LONG time ago like 3 years but recently I changed computers how can I get that movie back? p.s. I bought the movie from iTunes

If I purchased a movie, from a computer a LONG time ago like 3 years but recently I changed computers how can I get that movie back? p.s. I bought the movie from iTunes

If you don't have the movie on the old computer and you don't have the movie backed up on a disc somewhere, your only choice is to purchase the movie again. Currently, movie downloads are a one time deal andit is your responsibility to have a backup copy.
If you have the movie on the other computer still, you can burn it to a DVD and then copy it over to the new computer.
Personally, I have two computers and when I make a purchase on one, iTunes automatically copies it to the other and I have never lost videos or music in this manner.

HT1390 I've rented & downloaded a movie on my computer in itunes, but it does not show up on my Apple TV. Everything else shows up on Apple TV, including my computer's movie library. When I click on the movie in Apple TV it says I've already rented it.

I've rented & downloaded a movie on my computer in itunes, but it does not show up on my Apple TV. Everything else shows up on Apple TV, including my computer's movie library. When I click on the movie in Apple TV it says I've already rented it and asks if I want to rent it again. No, I just want to watch it.

Unfortunately I have to if I download it on my computer. I have rented itunes movies before directly using the Apple TV and it worked just fine and I could stay in the living room. Without clicking that icon on my computer, there was no way to watch it.

HT1296 When I sync my iphone with Windows 7, the contact moves to my computer, but the contact is not complete. No phone numbers. What am I doing wrong? I have also tried sync-ing with Yahoo, and that doesn't work either.

When I sync my iphone with Windows 7, the contact moves to my computer, but the contact is not complete. No phone numbers. What am I doing wrong? I have also tried sync-ing with Yahoo, and that doesn't work either.

The music sync is one way - computer to iphone. The only exception is itunes purchases. File>Transfer Purchases
It has always been very basic to always maintain a backup copy of your computer for just such an occasion. Use your backup copy to move everything to your new computer.

Just got my ATV2 and the stream from my win 7 Itunes library drops out after 30min or when changing movies.

just got my ATV2 and the stream from my win 7 Itunes library drops out after 30min of when changing movies. I have to turn off and turn on home share to stream again. Should i return all my apple products and go android instead....help, I want it to work. My firewall is off, ATV2 is running on ethernet and library is on wireless. My ps3 streams just fine over the network, I assume Itunes is at fault?

Please any one who comes across this and shares in my fustrations please click below and lodge a complaint. There is no solution to the dropouts until apple sorts it...Lets get the message across loud and clear
http://www.apple.com/feedback/appletv.html

My firefox opens automatically when the computer turns on and I don't want it too. What can I change?

When my Mac starts up, Firefox starts opening immediately. I don't want it too. How can I change it so it doesn't do this anymore.

See [[Firefox launches automatically when your computer starts]]
* Control-click on its Dock icon and uncheck 'Open at Login'
* Click Accounts (in the System row of the System Preferences window)
** Click the Login Items tab
** Click on Firefox in the list

HT1711 can i delete a movie from my computer that i've previously purchased in itunes and then download again when I want to watch it?

Can i delete a movie from my computer that i've previously purchased in itunes and then download again when I want to watch it? Seems like this would help me manage storage space.

Yes, provided the movie is still in the iTunes Store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.

Rolling window moves when browser window changes size??

I have added a rolling window into my page and it is in the
correct position when I click to preview, but when the browser
window moves (when I click on my Favourites window panel for
example) the rolling window moves along and out of its position.
Is there anyway to stop this?
Cheers,
Zoe

Change this -
</head>
to this -
<style type="text/css">

</style>
</head>
change this -
<body ...>
to this -
<body ...>
<div id="wrapper">
and this -
</body>
to this -
</div>
</body>
and see if that helps.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"dollecom" <[email protected]> wrote in
message
news:e5ffjv$qa8$[email protected]..
> I have added a rolling window into my page and it is in
the correct
> position
> when I click to preview, but when the browser window
moves (when I click
> on my
> Favourites window panel for example) the rolling window
moves along and
> out of
> its position.
>
> Is there anyway to stop this?
>
> Cheers,
> Zoe
>

Graphics move when changing computer

Similar Messages

Maybe you are looking for