Graphics not extending to edge of mobile screen in preview mode

Not sure if this is a bug or what... in design mode, my Accordion/menu goes the full width of the mobile page, but when I preview it, it doesn't reach the right edge, leaving a gap of open space.

Hi
Please provide the page url.
Thanks,
Sanjit

Similar Messages

  • Does anyone know why I am having formatting issues with my tablet and phone sites? I only have the desktop layout. There are banners and footers not reaching the edge of the screen.

    I only have the desktop layout. As I was having such problems with the tablet and phone layouts. However there are banners and footers not reaching the edge of the screen. This is only a problem when accessing the site via a phone or tablet.
    the site is www.excellententertainment.biz
    Cheers
    Hughie

    Do a Select all on your pages (Most likely a master page if it effects all pages) and you will likely find an empty element or element that extends past the design edges in your desktop design.

  • Is anyone else having difficulty with the iPhone 6 Plus intermittently not responding to touches on the screen in horizontal mode?

    My iPhone 6+ is occasionally not responding to touches on the screen when in horizontal mode. This happens both in the apps and on the home screen. In other words, when you go to touch on an area of the screen, it does not register. Even if the view is horizontal, when I rotated vertically the horizontal view will respond.

    I've not had issues.  What troubleshooting steps have you taken so far?

  • Masters not applying to pages, discrepancy between design and preview mode

    Hi there,
    I am having a crazy time with Muse, please please help me... I see some of you have looked at the post, but no help yet. Please don't let me down. SOOO confused!
    1) Master pages are not fully applying to the pages I assign, only parts of them.
    Above you can see that the sub-pages and the "WORK" page all have the C-Master applied to them, but then you look at one of those pages and not all of the features are there.
    Above is the C-Master page
    Above is one of those sub-pages (coffee tables) with the C-master applied, yet the navigation menu is missing!?!?
    2) Also the formatting is completely on the third image is completely wrong. There is extra space at the bottom of the page and yet I cannot move the page toggles to be the same as it is on the master. These formatting/margin/page size issues run throughout my pages and I cannot get them to all be the same! HELP!
    3) The page looks different in the design mode than it does in the preview mode.
    I am so confused and have gone through this from scratch once before thinking I did something wrong but I have had the same result.
    Please help me!!!
    Thank you!!
    - Carly

    Hi Parikshit,
    The sticky footer sounded promising, but it didn't change anything. I still can't move those bottom toggles to be at the desired ruler mark.
    As for the margins... Its my understanding that whatever you have in a master page will be applied to the pages you assign, but the content and spacing is different. There is no content that would push the page to extend further down, which I have seen done before. And because I cannot individually move the toggles I have no way of adjusting the spacing. I am going for a seamless look between pages, where the size and content of the page remains the same while the images in my portfolio change.
    Even if I go to Page > Page Properies and try to enter the correct numbers, it still doesn't affect the page.
    Does that clarify?
    Also, I am running 7.1 on a Mac OS 10.9...does that have something to do with it?
    Thank you so much for responding!
    - Carly

  • Title not extending to edge of frame when I export

    I can't figure out how to fix this issue where my title isn't extending to the edge of the frame. In premiere elements 11 it doesn't appear this way but when I export to YouTube the title is cut short. There are also some lovely black bars I'd also like to get rid, and I suspect that is a related issue, but my main concern is making the title not look so silly being cut off short.
    How title appears when uploaded to YouTube
    How title appears in Premiere, extending beyond the edge of the frame.

    HolbrookTravel
    When you open your new project for this work, are you using the Default project preset (1080i) or setting what would be appropriate for your source media.
    One of the major promotional features for Premiere Elements 11 is that the program will automatically select the correct project preset for you dependant on the properties of your source media. It seems to be doing a good job doing this for HD source media, but NOT for SD standard or widescreen. From the looks of your screenshots and video properties information, the suggestion is that you are using the default 1080i30 project preset instead of setting your own for
    NTSC DV Standard 4:3
    To do that, when you open Premiere Elements 11, you go to File Menu/New/Project and in the New Project Dialog you set the project preset for NTSC DV Standard. Be sure to put a check mark next to "Force selected Project Setting on this project."
    A YouTube preset for this upload to YouTube consistent with your Timeline/project settings would seem to be "Flash Video for YouTube". We could also talk about exporting your Timeline to an appropriate .mp4 file and then uploading that at the YouTube web site instead of Premiere Elements 11 Publish&Share/Online/YouTube.
    You appear to be forcing a 4:3 video into a 16:9 project with resulting black borders et al.
    If you need clarification on anything that I have written, please do not hesitate to ask.
    If you want to make a 16:9 project from a 4:3 source, we could talk about possibilities BEFORE export.
    ATR

  • Curve 8900 won't get past the T-Mobile screen on start-up

    I am hoping that someone out there can help. My T-Mobile BlackBerry Curve 8900 does not make it past the T-Mobile screen on start-up. The battery was fully charged when this happened. Personally, I think it has to do with iHeart Radio crashing, but I could be wrong. I have tried to plug the USB cord into a rear port on my laptop and launch the Blackberry Desktop Manager to see if I could do anything, but nothing happens. The BB Desktop Manager does not connect to the phone, because it is not getting past the T-Mobile screen on start-up. Not sure what to try.

    Hey VTX1300R,
    Do you have a recent backup of you device? If so the you may want to try to do a reset to factory on the device. Have a look at this article to see how to do it. http://bit.ly/98bCNO
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • I need to connect my Imac 27'' (newest version) up to 3/4 monitors (all 40'' LCD tv's with VGA and HDMI connections) with extended display to all external screens, not duplicate images. Is this possible?

    i need to connect my Imac 27'' (newest version) up to 3/4 monitors (all 40'' LCD tv's with VGA and HDMI connections) with extended display to all external screens, not duplicate images. Is this possible?

    I would suggest you visit an Apple dealer, preferably an Apple Store if there's one in your city, and ask for assistance in determining what you need. The questions and issues you bring up are rather complex to address in a technical support forum and would be better addressed in person where you and the salesperson can ask questions back and forth to arrive at the optimal setup.
    Regards.

  • Help! My phone is not taking the whole screen! (edge around the screen)

    I ve only been using my phone for less than a week. Today my phone was frozen so I hold down the home and the power button to do a reset. However, the apple logo appears and it took forever to get in the home menu so I hold down the buttons to reset the phone once again. The phone did get in the home screen after the second reboot but after that the size of the screen got smaller (Not taking the full screen) I turned off my phone and while I was under the sun i noticed that there is an edge around the screen! It is so noticable even I turned off the phone. So I used a full restore on my phone and now the edge is still there! Can anyone please tell me if they have the same problem before and know how to fix it(Like resizing the screen)? Thanks!!

    Is it a thick border? or just a couple rows? Mine has that, and a lot of electronics have the same thing... they cut the size they need and only use the pixels they want/need to use.
    For example I had a Zune and a new Nano that had the same thing... My Blackberry, and work cell phone... same thing.
    If its a thick border, then yes call apple and get it replaced/repaired.
    Message was edited by: Kalison

  • Light rays of effect not reaching to edge of screen after resize

    Hello,
    I have the following problem:
    I created a composition with an Image (Logo) that is highlighted by lightrays and reflections.
    It looks great -  than i decided, that it would even look better if it slowly zooms in.
    But now, after i scaled the composition down, the light rays don't reach to the edge of the screen no more.
    What can i do?
    Thanks!

    You need to do your animation on your logo, then precompose it (moving all attributes). You would then apply all of your effects work on your your new precomp, not the logo itself. Read more on Precomposing here.

  • Scrollbar-less windows extending below edge of screen?

    The MacBook I'm using right now running Mac OS 10.6.8 occasionally has an annoying problem where a window is too long for the screen, but the resize tab (if there is one) is thus also below the bottom edge of the screen.  Is there some setting in System Preferences I can change to address this problem, or some other way of handling it?  Thanks!

    Very true!  Regrettably, the green button is greyed out in this case for some reason, I don't know why.

  • Indesign CC does not display linked PDF image on screen

    On Mac1 (10.6.8) When I imported a PDF file into Indesign CC 9.1 as a linked image - the image would come in as usual, however the image would not appear on my screen. Only a blank page box.
    I can see the thumbnail image of the imported PDF in the links palette correctly.
    However, on my page it appears as a blank box.
    Selected Hi-res preview, and still it appears as a blank box.
    I export to PDF, and the image is there as it should be on the exported PDF.
    I tried the same image on Mac2 (10.8.3) with Indesign CC.
    The imported image appears correctly on the page. (no blank box)
    I saved that file and opened it on Mac1 that is having the problem displaying the image.
    Mac1 again does not display the image, instead it is a blank box.
    Tried the same image import in Cs6. No issue on either mac1 or mac2
    What could be causing the imported PDF not to display on the page in Indesign CC?
    Has anyone else come across this problem?

    Hi
    Are you still facing the same issue ?
    Please refer to these threads for steps that you can try :
    Edge Animation not working properly
    Edge Animate not working in Muse Browser Preview, But works in Edge Preview
    http://tv.adobe.com/watch/learn-adobe-muse-cc/integrating-adobe-edge-animate-graphics/
    Thanks,
    Sanjit

  • How do you hide elements for mobile screen sizes?

    I've built an interactive Edge page that is 1200 pixels wide. I'm working on making things responsive, and I would like to hide elements when the browser hits a mobile screen size - similar to adding a media query and setting an element to display:none at 450px or similar. How can I do this within Edge?
    If this is not possible within the interface, can I add my own media queries to the css to do this?
    Thanks.

    Hi ,
    Check out this forum post : Hide Elements with Screen Size CSS style sheets?. Might be helpful.
    Thanks and Regards,
    Sudeshna Sarkar

  • HT204291 My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi.  The iPad displays AirPlay set to TV with the Mirroring On (green).  My iPad IOS software is 8.2 and my Apple TV software is at 7.1.  The TV displays the Apple

    My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi.  The iPad displays AirPlay set to TV with the Mirroring On (green).
    My iPad IOS software is 8.2 and my Apple TV software is at 7.1.  The TV displays the Apple Menu.  The “Settings” does however displays the General menu allowing me to see:
    Apple software:          7.1 (7003)
    Apple TV:                   Model No. A1464, Part No. MD199B/A
    Signal Strength shows 5 circles.
    It does not display the iPad screen but when I use the BT Sport App I can hear the sound but there is no video.  I have searched the internet for a solution to no avail. The problem first arose when the IOS was at 8.1+ but it worked correctly briefly when I updated to IOS 8.2.  Can you help please?

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.
    If you are still having problems, the following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
    When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

  • I want to use my apple TV as a second monitor not a mirrored one, in other words, I want to use my TV as a second screen not a copy of my first screen,other people have asked this question but have been given mirroring answers. I want a second display.

    I want to use my apple TV as a second monitor not a mirrored one, in other words, I want to use my TV as a second screen not a copy of my first screen,other people have asked this question but have been given mirroring answers so I am spelling it out here very specifically. I want a second display. This should be possible and would be awesome. Anyone know how to do this?

    Nevermind I just installed it to try it and it's awesome, so happy right now, Thanks. All the things I had read about it on third party sites led me to believe it could not do extended desk tops, thanks for your help!

  • Yahoo e-mail page is distorted and hard to read (once in a while its OK) - box does not extend to the right side making e-mail info hard to read. Info displayed in the reading panel is OK.

    When I open the Yahoo email page, the box does not extend across the screen and the script is distorted making it hard to read the source, subject etc. The reading panel info reads OK. All other pages of Yahoo are not distorted.

    Many of your points are totally legitimate.
    This one, however, is not:
    …To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
    The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
    The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

Maybe you are looking for

  • ITunes wont open on a Windows 7 computer - no errors, etc.

    I can't seem to get iTunes to open on a computer after my father synced his iPad.  I deleted and reinstalled, and tried opening in safe mode.  Nothing is opening...it doesnt even show it in the Task Manager.  Anyone who can help?

  • Loss of sound (notifications, phone calls, etc) after 1.3.1

    What I did: I was listening to NFL radio cast hooked up through an iHome with a 3.5mm cable.  I disconnected the cable and then closed the application.  Sound for the Notifications then was controlled solely by the volume for stuff like NFL radio or

  • Error when embedding the plugin inside java

    I have IE wrapped inside java, and when IE loads a page with java, I get the error message "Attachment to a running Virtual Machine failed." I guess the plugin gets confused by the allready running VM. Do I need to supply some hooks for the plugin? M

  • Help!!!!!!! nothing is working to get rid of the red box!!

    i have tried everything. Nothing is working!!!!! I need help ASAP. I have already restored my ipod 5 and nothing is working.

  • Looking for pdf & chm reader

    Hello all i having the nokia 5610 phone , and i unable to find any pdf reader and chm reader to be able to read the formats do someone knows where i can find one ? thanks