Graphics of Z230 Tower Workstation under Ubuntu

I am seeking help with solving an issue with the graphics component of my new Z230 workstation (product number D1P34AV).
I am using the workstation with Ubuntu 14.04 LTS.
The problem started with the graphics card did not wake up after a suspend. To my surprise, the lspci utility determines "VGA compatible controller: NVIDIA Corporation Device 13bb (rev a2)". This surprises me because my model was supposed to be equipped with Intel on-board graphics, not an NVIDIA graphics card. When I enabled Integrated Graphics in BIOS (why was it disabled by default?), Ubuntu booted into a black screen. So, I would very much appreciate any help with the following two questions:
1. What is really the configuration of my computer's graphics component?
2. What product-specific drivers (i.e. Debian packages) do I need to install on Ubuntu to have a better user experience?

I opened a case at HP and this was the response. The driver pack resolved the problem.
HP Z230 Ubuntu Driver Pack:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5367828&swItemId=wk_139204_1&swEnvOid=418...
Nvidia Quadro K600 Linux 64 bit driver:
http://www.nvidia.com/download/driverResults.aspx/81252/en-us

Similar Messages

Switch between 7 &8 os HP Z230 Tower Workstation

At the moment my operating system is wind 8.1 downgraded to 7 but the very first time it was windows 7, how can you revert it back to windows 8.1
i know uninstall and install os but i have just recovery drive on my pc

Double post!!
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Orkut login issues firefox 3.6.13 under Ubuntu 10.10

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/782081]''
Hi,
I am novice to Ubuntu10.10. I am unable to login to the Orkut using firefox 3.6.13 under Ubuntu 10.10. I can login to orkut with same credentials on Windows XP. I guess the problem might be with Java. I have already installed the java plug in. When I type about: Plugins in url, I can see Java(TM) Plug0in 1.6.0_22.I have also installed JDK and other available stuff from canonical partners.
Please take a look and advise some direction.
Thanks for your time.

Thanks cor-el for taking time to investigate and reply. Sorry for the delay on my part, I tried the suggestions you made but it did not help.
Actually the problem turnout with the firewall . I just disabled some firewall settings and was able to login again. I will investigate further to understand how to configure firewall properly to white list some sites.
Thanks again.

How do I change the cursor blink rate? Firefox 3.6.10 under Ubuntu.

How do I change the cursor blink rate? Firefox 3.6.10 under Ubuntu.

See this old mozillaZine forum thread about this:
*http://forums.mozillazine.org/viewtopic.php?f=38&t=865895
''(please to not post in such old threads)''
See also:
* http://kb.mozillazine.org/about:config
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

Jmf web cam not recognize under ubuntu 12.04

I installed the jmf2.11e under ubuntu 12.04 following all the steps of the guide jmstudio seems to work well I open a movie in rtp.
the problem and the web cam is not recognized and when I try to get to recognize capture devices
java.lang.Error: Can not open video card 1
ava.lang.Error: Can not open video card 2
ava.lang.Error: Can not open video card 3
ava.lang.Error: Can not open video card 4
ava.lang.Error: Can not open video card 5
ava.lang.Error: Can not open video card 6
ava.lang.Error: Can not open video card 7
ava.lang.Error: Can not open video card 8
ava.lang.Error: Can not open video card 9
I wanted to know if it depends on the model of the web cam
or this version of linux is not supported
if that were true, there is another way to use the web cam using java and integrate it with the jmf
my application should use the webcam under linux
and transporting the contents in rtp,
All this works fine under Windows
Fortunately linux should be spotless and without bugs :)

hello, since no great guru gave me answer, (I doubt that there are still now gone are the good old days)
I solved using a library http://code.google.com/p/v4l4j/
I hope this can be of help to someone
avoid making a night to try jmf that do not work with the web cam in ubuntu 12.04

Cannot load TigerDirect and many other sites under Ubuntu. Whats that about?

Under Ubuntu, cannot load this and many other sites. Even Amazon, which initially loads, chokes at checkout time when ssl pages are accessed.

After connecting to wifi, iPad checks to see if connectivity to internet is possible, and/or if further login is required. To do that - it checks connectivity to www.apple.com . If not - it assums wifi is no good to you, and switches back to 3G.
There is a valid reasoning behind it, but indeed, it sounds like there are scenarious in which there should be option to disable this...

What workstation graphics card should i run under bootcamp?

I run Rhino (64 bit) with windows 7 through bootcamp. the software mfg's recomended graphics card is the AMD FirePro v7900 or v5900, and user group recos the nvidea quadro 4000. I am currently using an Nvidea gtx285 and driving two displays from it. Looking to upgrade both memory and video card for optimal performance.

Mixing nVidia and ATI under Windows is usually a no=go.
The FirePro is single slot and 150W so only needs 1 x 6-pin power cable.
Amazon has $790 or $100 more than the v7900 NVIDIA Quadro 4000 for Mac
I take it the GTX 285 doesn't work well enough?
If you don't care about early boot screen there are GTX 570/580 take up two slots.
some upgrade ideas:
Put Windows on an SSD and put your work data files on another drive.
is 2008 model uses FBDIMMs 8 x 4GB is max - 8 DIMMs though is ideal.
Crucial Technology CT2CP51272AP80E 8 GB
DDR3 (2009+) 24GB costs what 8GB FBIMM would.

Feature request: better graphic acceleration in OSX guests under VMware Fusion

It is currently not possible to run standard Mac applications (such as iMovie, iDVD) on an OS X guest under VMware Fusion, due to the lack of graphic accleration.
Therefore I would like to post the following feature request:
please add support for Quartz Extreme / Core Image graphic acceleration in OS X guests under VMware Fusion.
Thank you!
magoo2

It is currently not possible to run standard Mac applications (such as iMovie, iDVD) on an OS X guest under VMware Fusion, due to the lack of graphic accleration.
Therefore I would like to post the following feature request:
please add support for Quartz Extreme / Core Image graphic acceleration in OS X guests under VMware Fusion.
Thank you!
magoo2

Activate/deactivate WiFi on Lenovo B5400 under Ubuntu 14.04

I have a Lenovo B5400 with Ubuntu 14.04 x64. The ethernet port works fine. How can I enable/disable the wifi connection? I have no hardware button for this functionality. Under Windows I can press Fn+F5 and a dialog window appears, but I cannot find this functionality under Linux.
lspci | grep Network produces:
04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter
The answer from here is incomplete; any other idea?
Thanks.
Later edit: The output of rfkill list all is:
0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: yes Hard blocked: yes
1: hci0: Bluetooth Soft blocked: yes Hard blocked: no
2: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes

I've got the same Lenovo B5400 with Linux Mint 17 (based on Ubuntu 14.04). I've checked that fn+F5 works to enable/disable wifi. But the wifi is not directly supported by the kernel of this ubuntu version, so you have to previously install the driver. You have two choices:
-Update the kernel (I've done that, i'm using 3.13.0-29)
-backcompile the driver for the wifi chip, following these instructions: (from http://ubuntuforums.org/showthread.php?t=2205497&page=2)
sudo apt-get install linux-headers-generic build-essential git
# needed only if you don't have yet that package
git clonehttp://github.com/lwfinger/rtl8723be
# needed only if you don't have yet downloaded rtl8723be
cd rtl8723be
git checkout 604aa9058fb9e5bb1cf571c99989d081f8fc8b9
# because of older kernel issues
make clean
make
sudo make install
sudo modprobe rtl8723be
echo "options rtl8723be fwlps=0" | sudo tee /etc/modprobe.d/rtl8723be.conf
# Prevents the WiFi card from automatically sleeping and halting connection

No menubar under Ubuntu 11.10

I have been experimenting with Firefox and the most current version of Ubuntu. I am unable to get the Import/Export Feature for Bookmarks and reading help files, there is no 'Menubar' under tools.

Ubuntu 11.xx displays window menus in the control bar at the top of the screen with the switch to the Unity window manager.
* http://en.wikipedia.org/wiki/Ubuntu_Unity
Click on Bookmarks/Show All Bookmarks then move your mouse to the left upper corner toward Firefox Web Browser.
You'll get pop up menu (Organize, Views and Import and Backup).
*[[/questions/822193]]

Create RPM native installer under Ubuntu

Hi all,
I'm successfully creating .deb native installers on an Ubuntu machine from a .air file. I'm using AIR 2.6 SDK.
On the same machine I tried creating .rpm packages from the same .air file but without success.
It seems that the .rpm package is corrupted. After some tests it turned out that the .rpm is just a .deb package renamed.
Do I need to build the package under a different distribution that supports .rpm or maybe did I something wrong?
Thanks for any help,
Paolo

Hi Paolo,
That is the expected behavior. To create native installers for a particular distribution, you have to create it natively on that machine. eg, on Windows, you can only create an exe, on Mac a dmg, on Debian distros, a .deb and so on.(You may rename it to any other extension, but it won't work)
So, to build a rpm, you have to be natively on a distro that supports RPM(officially supported RPM distros are Opensuse and Fedora)
Hope this helps.
Neha

Performance Tools Sun Studio 12 under Ubuntu

I want to use the hardware counter under a x86-64 Ubuntu (Feisty). But the system isn't supported by the performance analyzer and the hardware counter aren't available. Exist any opportunity to use it or should i install red hat enterprise or suse enterprise. Gives there any free OS where the HW counters working?

You can try Sun Studio 12 on any machine you want. The 'unsupported' means: it's your choice, you are at your own risk, you are on your own. However, we still would be willing to hear from you, we would also help if we can. Your input and feedback are welcome!
You can even file RFE on bugs.sun.com if you feel the performance on Ubuntu is better, worth recommended, worth to be added to the 'supported platform' list, etc. Voice of Customer is always welcome too!
Rose

Installation problems under Ubuntu 6.10

I'm using Ubuntu 6.10 (Edgy Eft) and am having some problems installing Oracle Calendar. I've posted the output of my installation below. Any ideas?
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
nawk: error while loading shared libraries: libm.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.26887/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

This solution worked perfect for me on Ubuntu Gutsy (7.10)
I did have to make gui_install and cal_linux executable: chmod +x gui_install cal_linux

What program do I use to install Reader under Ubuntu

I am trying to install a later version of Adobe Reader than comes from the Ubuntu repository. When I use Adobe's download Reader page, I get the typical download box that asks if I want to open the file or save it. The default opening program on my system is VLC media player, which can't be right. What program should I select so Adobe Reader installs properly? (The Adobe site says if I get a "run or save" option I should pick "run".

There is one and only one player available on the Adobe website. Use this URL:
http://get.adobe.com/reader/otherversions/
It will give you a few choices for Linuix. I have not clue what would be appropriate for your version of Ubuntu.

FULL_SCREEN_INTERACTIVE not work under Ubuntu 8.1.0

I have an AIR application which sets to
FULL_SCREEN_INTERACTIVE in the constructor when the application
launched.
It works fine in XP environment, but fails in Ubuntu 8.1.0.
My developing environment is Adobe Flash CS3.
The code snippet as follow:
public class main extends MovieClip {
public function main() {
stage.displayState =
StageDisplayState.FULL_SCREEN_INTERACTIVE;
Please give me some suggestions. Thanks.

You're right, and we've seen a lot of issues similar to this using PlaneProjection. I'll file a bug on this.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Graphics of Z230 Tower Workstation under Ubuntu

Similar Messages

Maybe you are looking for