Graphics problem when upgrading to LabVIEW 8

I have just updated to LabVIEW 8, and now when I open my VIs most of the front panel widgets look like they are being rendered in 8-bit color, rather than the 32-bit that my display is set for.  Text generally looks OK, but buttons, table borders and column headers, etc. all look pixellated (sp?).  This includes the toolbar controls (run, stop, etc.).  The block diagram and everything else on the window look fine.  Any ideas as to what happened?  It all looked fine with version 7.1.
Thanks for your assistance!
-Joe

(Well, JPG is not a great format to demonstrate the problem, because it can create similar artifacts by its lossy compression even if the original image is perfect .)
The attached VI look great on my rig under LabVIEW 8.0.1, no dithering at all. (Have you upgraded to 8.0.1?).
Personally, I would blame the graphics driver. What kind of graphics card do you have? Is ther a newer driver available? What happens if you turn down the graphics acceleration a few notches?
(control panel..display properties..advanced..troubleshooting).
Are you running on a lapbtop via batteries? Some graphics card optionally reduce power consumption by simplifying the graphics. (For examply my ATI Mobility Fire GL 9000 has a power setting for "Allow automatic color depth reduction").
Try switching to 16bit color, then back to 32bit? Have you rebooted lately?
Message Edited by altenbach on 06-14-2006 12:14 PM
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • Upgrade drivers when upgrading to LabView v.8?

    After upgrading from LabVIEW version 7.1 to version 8.0 the Keithley 40-SR01 switch sytem (controlled by a 7002 main frame) does not function correctly.  So when upgrading from LabVIEW 7.1 to LabVIEW 8.0 do I need to upgrade the device driver also? 

    Hi tcsieng,
    You are correct. Just go to
    http://sine.ni.com/apps/we/niid_web_display.download_page?p_id_guid=E3B19B3E91CB659CE034080020E74861
    and download the driver again. When you go to install the folder, just
    place it in the LabVIEW 8 directory instead of the LabVIEW 7 directory.
    You should then be able to access the functions to speak with the 7002
    main frame with no problems.
    Regards,
    Matt S.
    LabVIEW Integration Engineer with experience in LabVIEW Real-Time, LabVIEW FPGA, DAQ, Machine Vision, as well as C/C++. CLAD, working on CLD and CLA.

  • Why display hanging and software problem when upgraded to ios 8

    Why display hanging and software problem when upgraded to ios 8

    Hi Redhazel,
    Thank you for using Apple Support Communities.
    To troubleshoot this issue where you're experiencing a poor image quality with your iPhone's camera, please follow the troubleshooting below.
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    iPhone: Hardware troubleshooting
    Cheers,
    Alex H.

  • Is there anything in particlar that I need other than the installati​on disk when upgrading from Labview 8 to 2010

    I have a Labview program that ran fine when I had Labview 8 installed. I recently upgraded to Labview 2010 and now my program will not work. When I run the program, none of my instruments read out and after about 5 seconds, the whole Labview program closes with no error messages. Can someone please help? I am a new Labview user and I don't really know how to troubleshoot this problem.

    If you have the installation disks that should be all you need. You will need a connection to the internet to register your product.
    Tim
    Johnson Controls
    Holland Michigan

  • Problem when upgrading from Gnome 3.0 to 3.2 [SOLVED]

    Hi,
    I've been fighting for 2 days trying to fix this problem: after having upgraded from Gnome 3.0 to 3.2, I can't login anymore (I have this message telling me that something wrong happened and I should try again).
    Here is what I tried:
    - Removing ~/.config ~/.gconf and ~/.gnome2
    - Connecting with a fresh new user
    - Reinstalling gnome-shell
    - pacman -S cogl
    - http://justin.jetfive.com/gnome-32-arch … in-problem
    But unfortunately it didn't help...
    Here is the output of my ~/.xsessions-errors : http://pastebin.com/4dbMFDsY
    [FYI I'm also running xfce4.8]
    Any idea?
    Thanks in advance!
    Last edited by mirelsol (2011-10-20 18:07:53)

    I had the same problem when I did the upgrade the very same day of the release. And the solution for me was to login using my battery. For some reason, GDM won't let me in if I'm plugged (I know it sounds crazy, but it works for me)
    Best of luck

  • Full-fledged IDEs available in SAP and relevant problem when upgrading / up

    Dear All,
    Could some please explain the best strategy to adopt as concerns exploiting the full-fledged development / customizing tools provided by SAP; e.g. Composition Environment Visual Composer, Web Dynpro Java, BPM, u2026etc. and avoiding the problems that would arise when upgrading to a newer version, or even updating to a higher fix (Support Package).
    Also, as exploiting those powerful development environment tools would necessarily need a good knowledge of the SAP database, could someone please guide to resources whereby necessary knowledge of the SAP underlying database could be aquired.
    Thank you in advance for your cooperation.
    Best regards.
    Reda Khalifa

    I tested the SAPEXE.SAR and the ouput was fine. I also have downloaded the file again in the meanwhile. Now I will try to update with this file, but i think it's exactly the same file because the size is the same.
    I have now tried the other SAPEXE with the same result. I don't know whats going wrong here
    Regards,
    Martin
    Edited by: Martin Rainer on Jul 21, 2008 8:54 AM

  • 10.1.3.3 setup Java problem when upgrading from 10.1.3.2

    Hi guys!
    I have a problem with upgrade from 10.1.3.2 to 10.1.3.3 on Windows
    The documentation is old what you can download! So I cannot find anything.
    The Infrastructure Installation and Configuration Guide is for 10.1.3.2.1 and from april 2007
    The Infrastructure Upgrade Guide goes from Siebel to OBI and from december 2006
    The problem is
    I have a fully functional 10.1.3.2 with all Java and everything.
    When I start the server install I get the following error in a small window:
    Java.lang.NoClassDefFoundError: run Exeption in thread "main"
    Where should I look? Should I uninstall the previous version?
    Thanx,
    Istvan

    I had the same problem when I did the upgrade the very same day of the release. And the solution for me was to login using my battery. For some reason, GDM won't let me in if I'm plugged (I know it sounds crazy, but it works for me)
    Best of luck

  • Unmarshaller failed problem when upgrading weblogic8.1 domain to 9.2

    Hi,I met a problem when I upgrade a 8.1 domain to 9.2 using upgrade tool. It seems the web.xml has error, and I also read some topic about this problem, but I didn't find there's any duplicate elements in this file, could anybody help me? Thank you! Here is the error and the xml file.
    ==================The error====================
    Unable to load descriptor /tmp/appcgen_EPCISProject_v18.7.ear/EPCISWeb/WEB-INF/web.xml of module EPCISWeb. The error is weblogic.descriptor.DescriptorException: Unmarshaller failed
    at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:147)
    at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280)
    at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248)
    at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:749)
    at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:376)
    at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
    at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:729)
    at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134)
    at weblogic.application.compiler.WARModule.processLibraries(WARModule.java:286)
    at weblogic.application.compiler.WARModule.merge(WARModule.java:303)
    at weblogic.application.compiler.flow.MergeModuleFlow.compile(MergeModuleFlow.java:23)
    at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
    at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36)
    at weblogic.application.compiler.FlowDriver$CompilerFlowDriver.compile(FlowDriver.java:96)
    at weblogic.application.compiler.ReadOnlyEarMerger.merge(ReadOnlyEarMerger.java:41)
    at weblogic.application.compiler.flow.AppMergerFlow.mergeInput(AppMergerFlow.java:94)
    at weblogic.application.compiler.flow.AppMergerFlow.compile(AppMergerFlow.java:47)
    at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
    at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36)
    at weblogic.application.compiler.FlowDriver$CompilerFlowDriver.compile(FlowDriver.java:96)
    at weblogic.application.compiler.AppMerge.runBody(AppMerge.java:130)
    at weblogic.utils.compiler.Tool.run(Tool.java:158)
    at weblogic.utils.compiler.Tool.run(Tool.java:115)
    at weblogic.application.compiler.AppMerge.merge(AppMerge.java:142)
    at weblogic.deploy.api.internal.utils.AppMerger.merge(AppMerger.java:70)
    at weblogic.deploy.api.internal.utils.AppMerger.getMergedApp(AppMerger.java:51)
    at weblogic.deploy.api.model.internal.WebLogicDeployableObjectFactoryImpl.createDeployableObject(WebLogicDeployableObjectFactoryImpl.java:177)
    at weblogic.deploy.api.model.internal.WebLogicDeployableObjectFactoryImpl.createLazyDeployableObject(WebLogicDeployableObjectFactoryImpl.java:150)
    at weblogic.deploy.api.model.WebLogicDeployableObject.createLazyDeployableObject(WebLogicDeployableObject.java:730)
    at weblogic.deploy.api.tools.Inspector.setup(Inspector.java:47)
    Caused by: com.bea.xml.XmlException: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.TagLibBeanImpl@a6cbe1f4(//TagLibs[WEB-INF/c.tld])"
    at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:54)
    at com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindingType.java:483)
    at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollection(AttributeRuntimeBindingType.java:385)
    at com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)
    at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(AttributeRuntimeBindingType.java:145)
    at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.unmarshalElementProperty(LiteralUnmarshalResult.java:159)
    at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.extractAndFillElementProp(LiteralUnmarshalResult.java:130)
    at com.bea.staxb.runtime.internal.ByNameUnmarshaller.deserializeContents(ByNameUnmarshaller.java:51)
    at com.bea.staxb.runtime.internal.AttributeUnmarshaller.unmarshalIntoIntermediary(AttributeUnmarshaller.java:47)
    at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:184)
    at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:154)
    at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
    at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:136)
    at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280)
    at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248)
    at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:749)
    at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:376)
    at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
    at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:729)
    at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134)
    at weblogic.application.compiler.WARModule.processLibraries(WARModule.java:286)
    at weblogic.application.compiler.WARModule.merge(WARModule.java:303)
    at weblogic.application.compiler.flow.MergeModuleFlow.compile(MergeModuleFlow.java:23)
    at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
    at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36)
    at weblogic.application.compiler.FlowDriver$CompilerFlowDriver.compile(FlowDriver.java:96)
    at weblogic.application.compiler.ReadOnlyEarMerger.merge(ReadOnlyEarMerger.java:41)
    at weblogic.application.compiler.flow.AppMergerFlow.mergeInput(AppMergerFlow.java:94)
    at weblogic.application.compiler.flow.AppMergerFlow.compile(AppMergerFlow.java:47)
    at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
    Caused by: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.TagLibBeanImpl@a6cbe1f4(//TagLibs[WEB-INF/c.tld])"
    at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:207)
    at weblogic.j2ee.descriptor.JspConfigBeanImpl.setTagLibs(JspConfigBeanImpl.java:128)
    at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
          at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
          at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:48)
          at com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindingType.java:483)
          at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollection(AttributeRuntimeBindingType.java:385)
          at com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)
          at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(AttributeRuntimeBindingType.java:145)
          at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.unmarshalElementProperty(LiteralUnmarshalResult.java:159)
          at com.bea.staxb.runtime.internal.LiteralUnmarshalResult.extractAndFillElementProp(LiteralUnmarshalResult.java:130)
          at com.bea.staxb.runtime.internal.ByNameUnmarshaller.deserializeContents(ByNameUnmarshaller.java:51)
          at com.bea.staxb.runtime.internal.AttributeUnmarshaller.unmarshalIntoIntermediary(AttributeUnmarshaller.java:47)
          at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:184)
          at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:154)
          at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
          at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:136)
          at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280)
          at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248)
          at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:749)
          at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:376)
          at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
          at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:729)
          at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134)
          at weblogic.application.compiler.WARModule.processLibraries(WARModule.java:286)
          at weblogic.application.compiler.WARModule.merge(WARModule.java:303)
          at weblogic.application.compiler.flow.MergeModuleFlow.compile(MergeModuleFlow.java:23)
          ... 2 more
    An unexpected error specifying configuration information for the application 'EPCISProject_v18.7' due to weblogic.management.provider.UpdateException: Exception in AppMerge flows' progression.
    =====================The web.xml=====================
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
    <web-app id="WebApp">
      <display-name>OnJavaCom Sample</display-name>
      <!--
           - Location of the XML file that defines the root application context
           - Applied by ContextLoaderListener.
           -->
      <context-param>
        <param-name>contextConfigLocation</param-name>
        <param-value>
             /WEB-INF/applicationContext.xml
              /WEB-INF/securityContext.xml
              /WEB-INF/jobContext.xml
              /WEB-INF/epcContext.xml
              /WEB-INF/naiContext.xml
              /WEB-INF/reportContext.xml
              /WEB-INF/tablemaintenanceContext.xml
              /WEB-INF/QIContext.xml
              /WEB-INF/feedbackContext.xml
              /WEB-INF/loginContext.xml
        </param-value>
      </context-param>
         <context-param>
              <param-name>log4jConfigLocation</param-name>
              <param-value>/WEB-INF/log4j.properties</param-value>
         </context-param>
         <!--
              - Loads the root application context of this web app at startup,
              - by default from "/WEB-INF/applicationContext.xml".
              - Use WebApplicationContextUtils.getWebApplicationContext(servletContext)
              - to access it anywhere in the web application, outside of the framework.
              - The root context is the parent of all servlet-specific contexts.
              - This means that its beans are automatically available in these child contexts,
              - both for getBean(name) calls and (external) bean references.
              - If your web container loads listeners first then this will work fine.  Otherwise,
              use the SpringContextServlet to load the context.
         -->
         <listener>
              <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
         </listener>
         <listener>
              <listener-class>com.bea.wlw.runtime.core.servlet.WebappContextListener</listener-class>
         </listener>
         <listener>
              <listener-class>org.springframework.web.util.Log4jConfigListener</listener-class>
         </listener>
         <servlet>
              <servlet-name>action</servlet-name>
              <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
              <init-param>
                   <param-name>config</param-name>
                   <param-value>/WEB-INF/struts-config.xml</param-value>
              </init-param>
              <init-param>
                   <param-name>config/main</param-name>
                   <param-value>/WEB-INF/struts-config-main.xml</param-value>
              </init-param>
              <init-param>
                   <param-name>storage</param-name>
                   <param-value>de.laures.cewolf.storage.TransientSessionStorage</param-value>
              </init-param>
              <!-- sets overlib.js location relative to webapp -->
              <init-param>
                   <param-name>overliburl</param-name>
                   <param-value>etc/overlib.js</param-value>
              </init-param>
              <init-param>
                   <param-name>debug</param-name>
                   <param-value>true</param-value>
              </init-param>
              <init-param>
                   <param-name>detail</param-name>
                   <param-value>2</param-value>
              </init-param>
              <init-param>
                   <param-name>validate</param-name>
                   <param-value>true</param-value>
              </init-param>
              <load-on-startup>2</load-on-startup>
         </servlet>
         <servlet-mapping>
              <servlet-name>action</servlet-name>
              <url-pattern>*.do</url-pattern>
         </servlet-mapping>
         <welcome-file-list>
              <welcome-file>index.html</welcome-file>
              <welcome-file>index.htm</welcome-file>
              <welcome-file>index.jsp</welcome-file>
              <welcome-file>default.html</welcome-file>
              <welcome-file>default.htm</welcome-file>
              <welcome-file>default.jsp</welcome-file>
         </welcome-file-list>
         <taglib>
              <taglib-uri>/WEB-INF/struts-bean-el.tld</taglib-uri>
              <taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
         </taglib>
         <taglib>
              <taglib-uri>/WEB-INF/struts-html-el.tld</taglib-uri>
              <taglib-location>/WEB-INF/struts-html.tld</taglib-location>
         </taglib>
         <taglib>
              <taglib-uri>/WEB-INF/struts-logic-el.tld</taglib-uri>
              <taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
         </taglib>
         <taglib>
              <taglib-uri>/WEB-INF/struts-nested.tld</taglib-uri>
              <taglib-location>/WEB-INF/struts-nested.tld</taglib-location>
         </taglib>
         <taglib>
              <taglib-uri>/WEB-INF/struts-template.tld</taglib-uri>
              <taglib-location>/WEB-INF/struts-template.tld</taglib-location>
         </taglib>
         <taglib>
              <taglib-uri>/WEB-INF/struts-tiles.tld</taglib-uri>
              <taglib-location>/WEB-INF/struts-tiles.tld</taglib-location>
         </taglib>
         <taglib>
              <taglib-uri>/WEB-INF/c.tld</taglib-uri>
              <taglib-location>/WEB-INF/c.tld</taglib-location>
         </taglib>
         <taglib>
              <taglib-uri>/WEB-INF/cewolf-1.1.tld</taglib-uri>
              <taglib-location>/WEB-INF/cewolf-1.1.tld</taglib-location>
         </taglib>
         <taglib>
              <taglib-uri>/WEB-INF/c.tld</taglib-uri>
              <taglib-location>/WEB-INF/cewolf.tld</taglib-location>
         </taglib>
    <!--
    In taglibs.jsp
         <%@ taglib uri="/WEB-INF/struts-layout.tld" prefix="layout" %>
    -->
         <taglib>
              <taglib-uri>/WEB-INF/struts-layout.tld</taglib-uri>
              <taglib-location>/WEB-INF/struts-layout.tld</taglib-location>
         </taglib>
         <filter>
              <filter-name>Acegi Filter Chain Proxy</filter-name>
              <filter-class>org.acegisecurity.util.FilterToBeanProxy</filter-class>
              <init-param>
                   <param-name>targetClass</param-name>
                   <param-value>org.acegisecurity.util.FilterChainProxy</param-value>
              </init-param>
         </filter>
         <filter-mapping>
              <filter-name>Acegi Filter Chain Proxy</filter-name>
              <url-pattern>/*</url-pattern>
         </filter-mapping>
         <listener>
              <listener-class>org.acegisecurity.ui.session.HttpSessionEventPublisher</listener-class>
         </listener>
         <session-timeout>60</session-timeout>
         <servlet>
              <servlet-name>NAI</servlet-name>
              <servlet-class>com.epc.common.servlet.EPCISServlet</servlet-class>
         </servlet>
         <servlet-mapping>
              <servlet-name>NAI</servlet-name>
              <url-pattern>/NAI</url-pattern>
         </servlet-mapping>
         <servlet>
              <servlet-name>MGB</servlet-name>
              <servlet-class>com.epc.common.servlet.MGBServlet</servlet-class>
         </servlet>
         <servlet-mapping>
              <servlet-name>MGB</servlet-name>
              <url-pattern>/MGB</url-pattern>
         </servlet-mapping>
         <servlet>
              <servlet-name>CewolfServlet</servlet-name>
              <servlet-class>de.laures.cewolf.CewolfRenderer</servlet-class>
         </servlet>
         <servlet-mapping>
              <servlet-name>CewolfServlet</servlet-name>
              <url-pattern>/main/cewolf/*</url-pattern>
         </servlet-mapping>
    </web-app>                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             

    I am dealing with the same issue. I am trying to install Business Objects Enterprise 11.
    ####<Aug 2, 2007 12:17:18 PM CDT> <Error> <Console> <imagenow> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1186075038254> <BEA-240003> <Console encountered the following error weblogic.application.ModuleException: [HTTP:101064][WebAppModule(Report Server Admin:admin)] Error parsing descriptor in Web appplication "C:\inreports\BusinessObjects Enterprise XI\BusinessObjects Enterprise 11\java\applications\admin"
    weblogic.application.ModuleException: Unmarshaller failed
         at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:781)
         at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:272)
         at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:360)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:56)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:46)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:147)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:61)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:189)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:87)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:718)
         at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1185)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:247)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:157)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
         at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    Caused by: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.ServletMappingBeanImpl@e30790b(/ServletMappings[weblogic.descriptor.internal.CompoundKey@ea2c6ca])"
         at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:207)
         at weblogic.j2ee.descriptor.WebAppBeanImpl.setServletMappings(WebAppBeanImpl.java:1227)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:48)
         at com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindingType.java:483)
         at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollection(AttributeRuntimeBindingType.java:385)
         at com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)
         at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(AttributeRuntimeBindingType.java:145)
         at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:185)
         at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:154)
         at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
         at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:136)
         at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280)
         at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:749)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:376)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:729)
         at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134)
         at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:775)
         at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:272)
         at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:360)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:56)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:46)
    weblogic.application.ModuleException: Unmarshaller failed
         at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:781)
         at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:272)
         at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:360)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:56)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:46)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:147)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:61)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:189)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:87)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:718)
         at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1185)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:247)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:157)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
         at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    Caused by: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.ServletMappingBeanImpl@e30790b(/ServletMappings[weblogic.descriptor.internal.CompoundKey@ea2c6ca])"
         at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:207)
         at weblogic.j2ee.descriptor.WebAppBeanImpl.setServletMappings(WebAppBeanImpl.java:1227)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:48)
         at com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindingType.java:483)
         at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollection(AttributeRuntimeBindingType.java:385)
         at com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)
         at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(AttributeRuntimeBindingType.java:145)
         at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:185)
         at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:154)
         at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
         at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:136)
         at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280)
         at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:749)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:376)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:729)
         at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134)
         at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:775)
         at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:272)
         at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:360)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:56)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:46)
         at weblogic.servlet.internal.WebAppModule.createModuleException(WebAppModule.java:980)
         at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:799)
         ... 25 more
    Caused by: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.ServletMappingBeanImpl@e30790b(/ServletMappings[weblogic.descriptor.internal.CompoundKey@ea2c6ca])"
         at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:207)
         at weblogic.j2ee.descriptor.WebAppBeanImpl.setServletMappings(WebAppBeanImpl.java:1227)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:48)
         at com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindingType.java:483)
         at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollection(AttributeRuntimeBindingType.java:385)
         at com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)
         at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(AttributeRuntimeBindingType.java:145)
         at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:185)
         at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:154)
         at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
         at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:136)
         at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280)
         at weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:749)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:376)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:720)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:729)
         at weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134)
         at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:775)
         at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:272)
         at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:360)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:56)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:46)
         WEB.XML FILE
    <!DOCTYPE web-app
    PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
    "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
    <web-app>
    <!-- General description of your web application -->
    <display-name>Admin Web Examples</display-name>
    <description>
    Crystal Enterprise admin web examples.
    </description>
    <!-- Context initialization parameters that define shared
    String constants used within your application, which
    can be customized by the system administrator who is
    installing your application. The values actually
    assigned to these parameters can be retrieved in a
    servlet or JSP page by calling:
    String value =
    getServletContext().getInitParameter("name");
    where "name" matches the <param-name> element of
    one of these initialization parameters.
    You can define any number of context initialization
    parameters, including zero.
    -->
    <!-- You can specify the default CMS machine name here -->
    <!-- Put your CMS name inside <param-value> </param-value> -->
    <!-- eg. <context-param> -->
    <!-- <param-name> CMS </param-name> -->
    <!-- <param-value> CrystalMS </param-value> -->
    <!-- eg. </context-param> -->
    <context-param>
         <param-name> CMS </param-name>
    <param-value> aschmidt </param-value>
    </context-param>
    <!-- Uncomment the following context-param if you are using
    multi-byte characters with WebLogic. Please note that for this
    to work your application will need to send data to and receive
    data from the client browser in UTF8-->
    <!--
         <context-param>
              <param-name>weblogic.httpd.inputCharset./*</param-name>
              <param-value>utf-8</param-value>
         </context-param>
    -->
    <!-- This context parameter specifies where to put the temporary image files that the viewer generates -->
    <context-param>
    <param-name>crystal_image_uri</param-name>
    <param-value>../crystalreportviewers11</param-value>
    </context-param>
    <!-- Uncomment out the following three context parameters to enable viewer exception logging. Not needed for
    normal running but could be useful for troubleshooting -->
    <!--
    <context-param>
    <param-name>crystal_enable_logging</param-name>
         <param-value>true</param-value>
         <description>
    "true" to enable
    </description>
    </context-param>
    <context-param>
    <param-name>crystal_exception_info</param-name>
         <param-value>long</param-value>
    <description>
    To display the exception info or not. If this parameter is not set, the default value is short.
    It can be one of the following values:
    a) disable - Not display the exception info. The exception will be rethrown and user has to handle it.
    b) short - Display the exception info in the short form. It displays the exception message only.
    c) long - Display the exception info in the long form. It displays the exception including the stack trace.
    </description>
    </context-param>
    <context-param>
    <param-name>crystal_exception_log_file</param-name>
         <param-value>c:\webreporting.log</param-value>
    <description>
    Set this parameter to log the exception in long form to the file specified.
    The value is the full path of the log file.
    </description>
    </context-param>
    -->
    <!-- Servlet Mappings -->
    <servlet>
    <servlet-name> objectViewer </servlet-name>
    <description>
    Object Viewer
    </description>
    <servlet-class> com.crystaldecisions.examples.ObjectViewerServlet</servlet-class>
    <load-on-startup>1</load-on-startup>
    </servlet>
    <servlet>
    <servlet-name>manageAccounts</servlet-name>
    <description>
    Manage User/Group Accounts
    </description>
    <servlet-class>com.crystaldecisions.examples.ManageAccountsServlet</servlet-class>
    <load-on-startup>1</load-on-startup>
    </servlet>
    <servlet>
    <servlet-name>adminLDAP</servlet-name>
    <description>
    Administrate LDAP plugin
    </description>
    <servlet-class>com.crystaldecisions.examples.AdminLDAPServlet</servlet-class>
    <load-on-startup>1</load-on-startup>
    </servlet>
    <servlet>
    <servlet-name>logon</servlet-name>
    <description>
    Logon to the CMS
    </description>
    <servlet-class>com.crystaldecisions.examples.LogonServlet</servlet-class>
    <load-on-startup>1</load-on-startup>
    </servlet>
    <servlet>
    <servlet-name>deleteInstance</servlet-name>
    <description>
    Delete instances
    </description>
    <servlet-class>com.crystaldecisions.examples.DeleteInstanceServlet</servlet-class>
    <load-on-startup>1</load-on-startup>
    </servlet>
    <servlet>
    <servlet-name>setReportLogons</servlet-name>
    <description>
    Set DB Logons
    </description>
    <servlet-class>com.crystaldecisions.examples.SetReportLogonsServlet</servlet-class>
    <load-on-startup>1</load-on-startup>
    </servlet>
    <servlet>
    <servlet-name>setReportSchedule</servlet-name>
    <description>
    Set DB schedule settings
    </description>
    <servlet-class>com.crystaldecisions.examples.SetReportScheduleServlet</servlet-class>
    <load-on-startup>1</load-on-startup>
    </servlet>
    <servlet>
    <servlet-name>serverAdmin</servlet-name>
    <description>
    Administrate servers.
    </description>
    <servlet-class>com.crystaldecisions.examples.ServerAdminServlet</servlet-class>
    <load-on-startup>1</load-on-startup>
    </servlet>
    <servlet>
    <servlet-name>viewreport</servlet-name>
    <description>
    View report
    </description>
    <servlet-class>com.crystaldecisions.examples.ViewReportServlet</servlet-class>
    <load-on-startup>1</load-on-startup>
    </servlet>
    <servlet>
    <servlet-name>viewrpt</servlet-name>
    <description>
    Reportsource bridge used to support Java applet viewer and ActiveX viewer.
    </description>
    <servlet-class>com.businessobjects.crystalreports.reportsourcebridge.ReportSourceBridge</servlet-class>
    <load-on-startup>1</load-on-startup>
    </servlet>
    <servlet>
    <servlet-name>localizeURL</servlet-name>
    <description>
    Used to redirect to the localized html page
    </description>
    <servlet-class>com.crystaldecisions.examples.LocalizeURLServlet</servlet-class>
    <load-on-startup>1</load-on-startup>
    </servlet>
    <servlet>
         <servlet-name>setRightsTablePref</servlet-name>
    <description>
    Used to set Object Rights Table's viewing preferences
    </description>
    <servlet-class>com.crystaldecisions.examples.SetRightsTablePrefServlet</servlet-class>
    <load-on-startup>1</load-on-startup>
    </servlet>
    <servlet-mapping>
    <servlet-name>manageAccounts</servlet-name>
    <url-pattern>/changeAliasesPasswords/manageAccounts</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>adminLDAP</servlet-name>
    <url-pattern>/adminLDAP/adminLDAP</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>setReportLogons</servlet-name>
    <url-pattern>/changeDBLogon/setReportLogons</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>serverAdmin</servlet-name>
    <url-pattern>/onePageServerAdministration/serverAdmin</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>logon</servlet-name>
    <url-pattern>/changeAliasesPasswords/logon</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>logon</servlet-name>
    <url-pattern>/adminLDAP/logon</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>logon</servlet-name>
    <url-pattern>/instancesByStatus/logon</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>deleteInstance</servlet-name>
    <url-pattern>/instancesByStatus/deleteInstance</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>objectViewer</servlet-name>
    <url-pattern>/instancesByStatus/objectViewer</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>viewreport</servlet-name>
    <url-pattern>/instancesByStatus/viewreport</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>viewrpt</servlet-name>
    <url-pattern>/viewrpt.cwr</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>logon</servlet-name>
    <url-pattern>/instancesByStatus/logon</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>logon</servlet-name>
    <url-pattern>/changeDBLogon/logon</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>setReportLogons</servlet-name>
    <url-pattern>/changeDBLogon/setReportLogons</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>logon</servlet-name>
    <url-pattern>/onePageServerAdministration/logon</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>viewreport</servlet-name>
    <url-pattern>/instancesByStatus/viewreport</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>deleteInstance</servlet-name>
    <url-pattern>/instancesByStatus/deleteInstance</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>setReportLogons</servlet-name>
    <url-pattern>/changeDBLogon/setReportLogons</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>localizeURL</servlet-name>
    <url-pattern>/instances/localizeURL</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>logon</servlet-name>
    <url-pattern>/rightsTable/logon</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>logon</servlet-name>
    <url-pattern>/userAdminTool/logon</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>setRightsTablePref</servlet-name>
    <url-pattern>/rightsTable/setRightsTablePref</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>logon</servlet-name>
    <url-pattern>/repositoryHelper/logon</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>logon</servlet-name>
    <url-pattern>/shortcutManager/logon</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>logon</servlet-name>
    <url-pattern>/adminToolConsole/logon</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>logon</servlet-name>
    <url-pattern>/query/logon</url-pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>setReportSchedule</servlet-name>
    <url-pattern>/changeDBLogon/setReportSchedule</url-pattern>
    </servlet-mapping>
    <!-- Define the default session timeout for your application,
    in minutes. From a servlet or JSP page, you can modify
    the timeout for a particular session dynamically by using
    HttpSession.getMaxInactiveInterval(). -->
    <session-config>
    <session-timeout>20</session-timeout> <!-- 20 minutes for session objects -->
    </session-config>
    <!-- The welcome file list -->
    <welcome-file-list>
    <welcome-file>default.htm</welcome-file>
    </welcome-file-list>
    </web-app>
         WEBLOGIC.XML FILE
    <weblogic-web-app>
    <context-root>/businessobjects/enterprise11/adminlaunch</context-root>
    </weblogic-web-app>

  • Document Problems when upgrading B1 from 2004 to 2005

    When upgrading from B1 2004 to b1 2005 any documents over 2 pages cause B1 to crash - anyone found the same problem or a solution.

    Hi clive
    When you say it crashes, does it just close and no error. i've came across that problem when making complex documents. If you have made your document as an A4 document, check what the default printer is? Go to file->page setup  .You'll see the printer it will print with and it's page size (letter,A4,etc). Make sure that is the same as the one you have set in the pld in the document.
    Hope this helps

  • MDS9509 iSCSI problem when upgrading to 3.1(2a)

    Hi,
    Hopefully someone can help, or at least point me in the direction as to where to look to fix this problem. On our site we have a couple of 9509 switches with the DS-X9308-SMIP IPS module, which we use to connect to some exposed LUN's on a HP EVA5000 disk array via a Proxy Initiator, and ACL's on the switch. The clients are on v2.0-754 of open-iscsi on SLES 10.1 machines.
    Now we are seeing a strange problem, when we upgraded the SAN-OS on the switches from 2.1(2e) to 3.1(2a) (and I have verified the problem still exists with v. 3.1(3), which is does) in that the iSCSI clients, can still see their disks (via sendtargets), however when they attempt to login to them, you get the following message in dmesg/syslog
    scsi4 : iSCSI Initiator over TCP/IP
    4:0:0:0: scsi scan: consider passing scsi_mod.dev_flags=COMPAQ:HSV110 (C)COMPAQ:0x240 or 0x1000240
    and no device file is created (I have tried passing the option suggested via -v, and in the iscsid.conf file, however it doesn't fix the problem) whereas when the switch is running on 2.1(2e) with the same configuration, it all works, and this appears in syslog:
    scsi6 : iSCSI Initiator over TCP/IP
    Vendor: COMPAQ Model: HSV110 (C)COMPAQ Rev: 2001
    Type: Direct-Access ANSI SCSI revision: 04
    SCSI device sdb: 104857600 512-byte hdwr sectors (53687 MB)
    sdb: Write Protect is off
    sdb: Mode Sense: 97 00 10 08
    SCSI device sdb: drive cache: write through w/ FUA
    SCSI device sdb: 104857600 512-byte hdwr sectors (53687 MB)
    sdb: Write Protect is off
    sdb: Mode Sense: 97 00 10 08
    SCSI device sdb: drive cache: write through w/ FUA
    sdb: sdb1
    sd 6:0:0:0: Attached scsi disk sdb
    sd 6:0:0:0: Attached scsi generic sg5 type 0
    Luckily we have 2 switches, so we have 1 working configuration to leave for production, and one we have to try and troubleshoot this issue. However we would like to update the SAN-OS at some point, and get some failover setup incase of fabric issues.
    So has anyone else seen this problem, and know how to fix it? I have gone through the online Cisco documentation, and I could not find anything which helped, hence this post.
    Any help would be much appreciated.

    Only 2 PDU commands and responses.
    These are probably a SCSI Report LUNs and/or a SCSI Inquiry. Perhaps the storage is sending a SCSI check condition, eg. lun masking is blocking the host. You should really get an ethereal trace on the ethernet to see what those PDUs are in detail.
    Initiator x.x.164.14 (suse-test)
    Initiator name iqn.1996-04.de.suse:01.c48fdfc3cec6
    Session #1 (index 6)
    Target iqn.1986-03.com.x.x:disk.ress.lun0
    VSAN 255, ISID 00023d000000, TSIH 4097, Status active, no reservation
    Type Normal, ExpCmdSN 3, MaxCmdSN 130, Barrier 0
    MaxBurstSize 262144, MaxConn 1, DataPDUInOrder Yes
    DataSeqInOrder Yes, InitialR2T No, ImmediateData Yes
    Registered LUN 0, Mapped LUN 1
    Stats:
    PDU: Command: 2, Response: 2 <<<<<<<<

  • Problem when upgrade NCS 1.1.1.24 to Prime 1.3.0.20

    Dear Every one,
              I have problem with upgrading NCS 1.1.1.24 to Prine 1.3.0.20 The upgrade was stop on the step 3 of 7 as below;
         Stage 3 of 7: Executing pre-install ...
              % Pre-install step failed. Please check the logs for more details.
    so I use command to show logging;
    Apr 27 20:58:56 NCSSERV01 debugd[3104]: [11981]: application:install cars_install.c[550] [admin]: App (NCS) Preinstall script preinstall.sh failed; strings: '/opt/C
    SCOncs/webnms/classes/com/cisco/wnbu/server/util/Version.class': No such file#012Patch existing , proceeding upgrade preinstall step:#012#0121.1.1.24#012Upgrade: /opt/
    tempFolder4Upgrade already exists. Clearing it.#012Upgrade: Pre-install tempFolder4Upgrade creation Completed.#012#012Pre-install Safekeep Existing Version Started...#
    012Pre-install Safekeep Existing Version Completed.#012#012Pre-install Safekeep Config Files Started...#012cp: cannot stat `/opt/CSCOncs/xmp_inventory/dar/customized-f
    eature-parts/CONFIGURATION/*': No such file or directory#012Pre-install Safekeep Config Files Completed#012INFO: HA settings : /opt/CSCOncs/conf/rfm/classes/com/cisco/
    common/ha/config/haSettings.xml#012INFO: Backing up HA settings...#012Starting Upgrade version checks...#012#012#0121.1.1.24#012ERROR: High Availability is enabled. Hi
    gh Availability must be removed before attempting installation.#012
    Apr 27 20:58:56 NCSSERV01 debugd[3104]: [11981]: application:install install_cli.c[173] [admin]: error message: Pre-install step failed. Please check the logs for m
    ore details.
    Apr 27 20:58:56 NCSSERV01 debugd[3104]: [11981]: application:install install_cli.c[177] [admin]: Error while Installing - Application bundle: PI-upgrade-bundle-1.2.
    1.12.tar.gz  Repository: defaultRepo  ErrorCode: -635
    Do you have any idea to resolved it? 
    Thank you for your response.

    You will have to get back to the point where all NCS 1.1.1.24 processes are running----
    1) ncs stop then ncs start
    if that works then great:::: else
    2) restore from working backup of NCS 1.1.1.24
    Once you are there:::
    1) remove HA
    2) install patch 12
    3) take backup
    4) restore that backup to reformat the DB according to patch 12 executables
    5) upgrade

  • ITunes graphic problem when in Miniplayer mode

    Hi everyone,
    i have this very annoying problem... Ever since i have updated my iTunes to 10.2 (currentsly on 10.2.1.1) i have graphical problems with iTunes...
    The button have a white square around them, its like the transparency isnt owrking for the icons...
    I have uninstalled, restarted and still the same...
    I an running Windows 7 SP1...
    *How can i fix this?*
    Ps. I'd post a pic but dont know how....
    Message was edited by: MaksTomalak

    I am running 10.3.1.55 and Win7 64 Enterprise and it does the same thing... Looks bad. My suspician is the Video Card... I have an nVidia GeForce 9500GT and it has been a Clunky VGA Card.
    I plan on Changing to an ATI next week. I will see if ti keeps happening and Post back.

  • Has anyone encountered a Microsoft Visual C++ Runtime error in Windows 2000 when upgrading from Labview 6.0i to 6.0.2?

    When I try to upgrade Labview 6.0i to 6.0.2 by running the setup.exe file I downloaded from the NI site, I immediately get a dialog box with the header "Microsoft Visual C++ Runtime Library" and it says "Runtime Error! Program: C:\setup.exe abnormal program termination."
    I'm running Windows 2000, but I've successfully installed it on another computer with the same setup. I'm guess some of the DLL files in system32 has been corrupted or mismatched versions. But I don't know which one...
    Anyone know what this means?

    Hello,
    You can probably solve this problem by going to Start >> Run and typing the following:
    Regsvr32 \msi.dll
    Where is the folder where the msi.dll file resides on your computer (you can use Start >> Find to find the exact location). Once you do this, the installation of the 6.0.2 update should work properly.
    Please let me know if you continue to have any problems. Thanks for your patience on this issue, and have a pleasant day.
    Sincerely,
    Darren Nattinger
    Applications Engineer
    National Instruments
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • Graphic problems when I pull Status bar down

    hey,
    Since I upgraded to 4.4.4 I see graphic errors.
    Sometimes, when I pull the status bar down some spots starts flickering and get transparent. I have to get to the homescreen, and try it again to fix this. but it keeps reoccuring.
    I haven't figured out what triggers this behaviour and it doesn't happen always.
    Does anybody know where the problem is and what I can do to fix this.
    I hope I described my problem so that its understandable. I try to get a screenshot the next time it happens.

    @ashishsingh007 - A master rest simply deletes your personal data/settings from the handset where as a firmware repair reinstalls the operating system as well. If you have not tried this I would advise doing so.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Problem when upgrading to 11.1.3.8

    I was importing a large file into iTunes (2 hour audio clip called “1001”), when I received the download update dialog.  I did this, but after downloading the installation process began and closed iTunes.  Everything seemed to upgrade with the program fine.  However, I have an issue I can't resolve from the process.
    The file that was being imported did not complete when the installation closed iTunes.  I was able to reimport it…but now iTunes appends any file with the same name after importing.  iTunes appends a "1" to the back of it.  For instance "1001 1"  As if the file already exists or is stuck somewhere.  However, I haven't found any remnant of the original file that was importing.
    This creates a bit of a problem becuase I have a process for archiving audio we generate to itunes.  And this requires me to change the name of the cut...everytime I import audio from a field recorder....which is constantly.
    Is there a place I can look to find why iTunes believes this name is in use already?

    It turned out, iTunes had copied the actual file to the Windows NTFS location...but not added it to the library.  Once I found the orphaned file, in the iTunes>Media>Music>Unknown Artist>Unknown Album and deleted it...everything worked as before.

Maybe you are looking for