Graphics tablet Won't Reach Full Screen Anymore

I'm on Windows 7, it's a Genius tablet, not Wacom, the drivers are all up to date, and I already checked the settings in the Genius interface and can't find a fix. I've always been able to navigate the entire screen with the pen and tablet, including in Photoshop, so I have no need at all for a mouse, up until last night. This morning, I got on the computer again and now the pen and tablet can't reach the entire screen. It can go all the way to the top and left as usual but can no longer reach all the way to the bottom or right and this is true not just in Photoshop but in anything.
I didn't change anything from the time I shut the computer off last night to now so I'm not sure what's causing this. I tried reducing the screen resolution and that had no effect. Any ideas or should I just figure it's a weird hiccup that'll correct itself at some point?

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

Similar Messages

Cover Flow won't go full screen anymore

I just installed Windows 7 last week and Cover Flow was going full screen, and a week later I just get two arrows, and not the 4 arrows in each corner, and Cover Flow won't go full screen.
Any ideas?

I obviously had tried this a few times before, but I decided to try a regular restart for a 5th time and it magically started working.
Sorry!

Using FF 11.0 and it won't do FULL SCREEN anymore

Up until today, using either the full screen button on the top right corner, or F11 would put my browser in full screen mode. This morning...nada, it just chunks up the top tool bar

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

Have reset Firefox & completed all of steps in "Flash video won't play full screen on YouTube, Facebook and other websites", but video still won't work. Help!

I have reset Firefox, completed all the steps in "flash video won't play full screen on YouTube, Facebook and other websites". And the video still won't play in full screen. It will play, but frequently stops or sound continues and picture freezes. I have noticed that if I continually move my mouse, it plays fine. All these videos play fine in IE and Chrome.

Some problems with Flash video playback can be resolved by disabling hardware acceleration in your Flash Player settings. (See [[Flash Plugin - Keep it up to date and troubleshoot problems|this article]] for more information on using the Flash plugin in Firefox).
To disable hardware acceleration in Flash Player:
#Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
#Right-click on the Flash Player logo on that page.
#Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
# Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. [[Image:fpSettings1.PNG]] 
# Remove the check mark from '''Enable hardware acceleration'''.
# Click '''Close''' to close the Adobe Flash Player Settings Window.
# Restart Firefox.
This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
Does this solve the problem? Let us know.

Some projects won't load full screen view?!?

I have about 10 projects (out of 130) that won't load in the full screen view if I enter the project and then try to enter full screen. The areas around the Aperture program window (menu bar and dock) turn black as if it were in full screen but the program window just sits there doing nothing as if I never clicked to enter full screen. If I try push F to exit full screen, the black disappears but my dock and menu bar do not return. At this point, I can't click on other projects and have to quit the program (just normal command-Q works fine) and re-open it to do anything.
What is strange is that if I click to view all my projects, enter full screen, and then double click on one of them that is giving me this problem, it will load the pictures fine. But it seems to hang up when I try to go to another project and I have to quit the program.
The 10 projects are all pictures taken within a 1 week trip and they include between 50-100 jpeg images each. They were imported into Aperture as part of my iPhoto library. No other pictures that came from iPhoto have this problem.
Things I have tried to fix the problem:
1. Repair permissions on library and system
2. Rebuild library
3. Export originals from iPhoto and import into Aperture as a new project
Any suggestions?
Edited to Add: If I double click a picture so it loads into "Viewer" mode, it seems to enter full screen mode fine when I press F, but the system hangs up and bogs down badly when I try to jump to another problem project from full screen mode. The Activity window says it's loading, but it never does. If I click on anything else, it just continues to say it's loading the first project I tried to switch to.

I have 4 GB of RAM in a 2.2 Ghz Santa Rosa MBP.
I don't believe it's an issue of needing to wait for it to load because it loads other projects perfectly. These 10 projects only have 50-100 jpegs (1.8 MB average file). I can enter and exit projects with 200 RAW files (5 MB average file) with absolutely no delay.
Additionally, it will never load the project. It will say it's loading in the Activity Window but never complete. I can't click to load anything else as the program basically locks up. But it's not really locked because I can Command-Q to exit and it closes properly.

Can view full screen anymore

This is ticking me off to no end. When I click on a movie it won't play in the little video viewer in the lower left corner. Also when I click to play a movie and it shows up in a separate window it won't let me view it full screen. What the heck is going on?
Before I upgraded and clicked on a movie or tv show it would always play in the little viewer in the lower left corner and whenever I clicked on that it would let me go to full screen in the new window.
How can I change this?
As an addendum there are some movies where I can do this and others where I cannot. Help!
Message was edited by: Kyle Varnell

Hudson, here's the problem though: When I do switch it to "Artwork Viewer" and then click on the artwork viewer a separate window comes up playing the movie(s) as it did before I upgraded.
When the separate window comes up, I'll scroll over the movie and the control panel comes on screen as with before. However now when I click on the arrows that make it full screen the movie itself completely disappears but I can still hear the audio. Whenever I clicked on the arrows before it always went to the full screen, movie playing. I assume that this is a bug of some kind but do you have any ideas of what I may or may not be doing?

IPhone contacts won't display full screen picture after IOS 7.1 update.

How do I get pictures in Contacts to appear full screen when the phone rings instead of as a thumbnail?

Sorry, you can't, as it was a change made by Apple with iOS 7.1. There are no settings to change it.

Full screen videos/streams on second monitor won't stay full screen while using another window on other monitor

Whenever I open and then full screen a video or stream of any kind, I am unable to use another window of Firefox while the video/stream maintains full screen. When I click off the video/stream it reverts back to the smaller screen. Is there any way to change this?

Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
Profile Backup and Restore
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Illustrator CC 2014 documents won't go full screen (and the UI is extremely low resolution)

Illustrator CC 2014 does not seem to be running correctly. My documents will not go full screen. As you can see, there is a huge white gap surrounding the entire document. I cannot grab the corners or sides to stretch it to full width. On top of this, the whole interface is blown up and looks very low resolution.
Compare this to a screen shot of the previous version on the same computer:
The document will expand to the full width available and the the UI looks much better. Does anyone know how to fix this? I am using Windows 8.1

Since you still haven't got your data from the drive(s). I would advise performing a Windows installation without formatting the drive... I don't like this solution but at this stage you have probably tried everything else.
Use a Windows 7 Reinstallation DVD when installing ensure you select...
Select Custom: Install Windows only (advanced)
If you do not select any of the drive options and simply highlight the largest partition and select next:
Windows will dump all the old installation files in the Windows.old folder

Mail app won't remain full screen at restart

I'm using sparrow on 10.8.2, and everything was perfect a couple of days ago...until it would always open in normal mode and require that one click to go back to full screen every time it starts. I'm pretty sure it's because I did something wrong...because it was fine before...but I can't seem to figure out what I did wrong? I even delete the app and reinstall, restart the computer...
Please help~! Thank you.
Nevermind...I got it. It's  > System Preferences > General > Restore windows when quitting and re-opening apps....
Which I just turned off a couple of days ago because I didn't want safari to start every time with the previously browsed webpages...
Guess no way around this conflict then...

Hold down the power button on your iPad until it has a slide switch saying "Slide to Power Off." Slide that switch and let the iPad power all the way down. Now hold the button again until the Apple Logo appears and let the iPad turn back on. This usually solves rotation issues.

You Tube won't play full screen on Chrome

When I select full screen, the window stays same size, but moves to top left of the screen. I go into settings and my Hardware Accelaration option has gone, it used to be here...This only happens in YouTube, other videos on different sites I can select full screen no problem, though the Hardware accelaration option has gone there too. Now I only have 4 options to choose from in Local Settings. It's also gone from Global Settings.
I've tried clearing caches etc..no joy. It does work fine on IE9 for me, but I've always used Chrome & GMail, and don't wish to stop.
I'm using Windows Vista Business SP2 32 bit, my browser is Google Chrome Version 26.0.1410.64 my Flash version is 11.7.700.179, which is the correct version for my browser and O/S and is up to date. Windows, Chrome and Flash updates are all current.
I've been on forums, I've enabled/disabled plug ins, I've cleared and deleted caches and Adobe files, and it's now getting annoying.
I realise there has been an update recently, but I don't want to start messing about uninstalling and digging out earlier versions etc...Isn't it all meant to be incorporated into Chrome and updated automatically so users can avoid doing these sorts of things.
If anybody can help, I'd be grateful. If you need to know anything else, please ask.
Thanks,
Martin

Ok I got it fixed.
Let me give you guys some info.
Win7 Ultimate 32bit
Google Chrome Version 26.0.1410.64 m
Had this pugin installed
Name:
Shockwave Flash
Description:
Shockwave Flash 11.7 r700
Version:
11.7.700.202
Location:
C:\Users\Cbu\AppData\Local\Google\Chrome\User Data\PepperFlash\11.7.700.202\pepflashplayer.dll
Type:
PPAPI (out-of-process)
The problem only occurs on a few youtube videos. not all.
Giving an example: https://www.youtube.com/watch?v=oHxUNaN4Qws
I fixed this by downloading the same version but for firefox (NPAPI one)
And disable the PPAPI one.
Refresh the youtube page. And it works.
Next I updated my Google Chrome, to
Version 27.0.1453.94 m.
Restarted the brower as prompted.
Then I disabled the NPAPI one and enabled the PPAPI one.
Refresh the youtube page. And it works too.
In summary, if you are having this issue. Try update your google chrome. If cannot then try the flashplayer for firefox.

Web pages won't open full screen

my web pages will not maximize to a full screen for some reason. Any ideas??

Mmmm ... curiouser and curiouser ...
Just to update my progress since my original post yesterday ...
I contacted my service provider to check my settings, and was told there was no problem with their server and that I appeared to be connected OK.
I doubled checked my router settings (I'm using a router connected through Ethernet, not a wireless connection). All was as it should be (I just changed the DNS Server addresses to ones my service provider gave me) and managed to view the router's home page (NetGear), as confirmation that I was connected OK.
I checked the Network Diagnostics on my iMac and everything was fine, I was connected to the internet.
I reinstalled the bundled software that came with my iMac (Safari etc.), then checked the Network Diagnostics again ... everything was still fine!
But obviously it's not!
I can get Google and all it's related bits ... Images, Maps, News etc., to work fine. I can get Google Earth to work fine. I can access a simple website that is just a home page with one link to a large 60page PDF and view that fine. I can view a handful of other sites fine.
But when I attempt to view most other sites, it seems to connect, begin opening, and then just stop! I don't get the Safari box saying it can't be opened. It doesn't crash. It just stops! Reloading the page takes it to the same stage of opening, and again, no more.
By a process of elimination, it must be a Safari issue, either a glitch or some conflict somewhere? Either way it's a tad frustrating!!

My graphics tablet doesn't align with screen in Photoshop Elements 10

Hello,
I had been using my Wacom Bamboo tablet on Photoshop Elements 10 with no problems whatsoever. Today it seems is a different story. As you can see in the image below, the tablet seems to not be aligned correctly with the screen. I am limited to draw in only the section I have scribbled in. I am unable to access any of the screen to draw, use tools etc because it just wont let me when using the tablet. When I use the mouse it is fine.
I have adjusted all of the settings and made sure everything is correct with my tablet driver and the settings of my tablet, I have no problem with any other program on my computer. I have two tablets and the same problem happens with both. I have tried un-installing Elements but the problem is still there when I re-install it.
I really am at a loss, it seems like such a simple thing to fix yet I am completely stumped on this one. Please help as I use my tablet on a daily basis and this really is gutting!!!

PSE will respect the Wacom settings and sensitivities. Go to your tablet control panel and check your pre-sets. Or select he brush tool in the Elements Editor and change the settings to suit.

Im getting a grey box at the bottom of my screen under the display line for the add ons like ghostry,personnas and greasemonkey icons are . i cant seem to get a "full screen" anymore . can you tell me how to overcome this

the box is located under the icon line at the bottom of the screen and above the window tool bar/icon box ! its almost like im running in a wide screen mode ! i cant seem to find a way of making the screen deeper, so it fills all the available space ! its also . freezing and it messes with the add ons and the adobe plugins ! a real shame cause i think the new layout is great . kep up the good work

Do you have that problem when running in the Firefox SafeMode? 
[http://support.mozilla.com/en-US/kb/Safe+Mode] 
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: 
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Compatibility issue with ie, won't load full screen background image slideshow

Hi,
The page is http://blackpaint.co.uk/new/
It cannot get past the loading gif
Here are the errors codes ie is giving me, I've tried editing the line it is talking about - but no luck.
Message: 'slides[...].url' is null or not an object
Line: 23
Char: 3
Code: 0
URI: http://blackpaint.co.uk/new/supersized3/supersized.3.0.js
Message: 'slides[...].url' is null or not an object
Line: 23
Char: 3
Code: 0
URI: http://blackpaint.co.uk/new/supersized3/supersized.3.0.js
Thanks for any help,
Luke

I've been trying to compare there demo (which works in IE) with mine and I can't get it to work. Here's theirs - http://buildinternet.com/project/supersized/3/default.html
I tried including links onto the image as suggested in another message board, but no luck.

Graphics tablet Won't Reach Full Screen Anymore

Similar Messages

Maybe you are looking for