Graphics/Video Card [REPLACEMENT / UPGRADE] on HP Pavilion Desktop - Help

I have the following:
HP Pavilion Elite m9152p Desktop 
Upgraded to Windows 7 Professional 64-bit (upgraded 11-2009)
The video card seems to have gone out and I have tried the following:
Reinstalling Operating system
Uninstalled & Reinstalled & Rollback drivers
Prior to the above attempts, no changes had been made to software or hardware only leading to the same result: The video seems to be fine and then it freezes and crashes and ultimately has to have a hard-restart at which point, the computer loads the onboard video/graphics.
I need to purchase a replacement video/graphics card, but I am unsure what specs I need to be aware of or what my computer can handle as far as a replacement and maybe a possible upgrade (not necessary) - any help in this regard would be most appreciated.
Thanks!
This question was solved.
View Solution.

I think it is a good choice.
The reviews seem positive for the most part including that the fan appears to be quiet.
I don't know if your previous card had HDMI.
When you install your new video card, it may disable your onboard audio due to the HDMI audio chip on the video card.
If you do lose your onboard audio, after you install the video drivers, reboot the machine, go into the BIOS, find the onboard audio setting. It may be set to Auto or Disabled. Change the setting to Enabled. Save the setting where you made the change and again when you exit the BIOS.
Upon reboot you will have your onboard audio back.
Looking forward to hearing back from you.
Paul

Similar Messages

  • Another video card/PSU upgrade for HP Pavilion p6565uk

    Hi there
    I want to upgrade from the basic Nvidia card and 300W psu provided with my HP Pavilion P6565UK, purchased a few months ago.
    I am looking at either a Corsair CX 600W or an Antec HCG-750W, I am not sure if there is a difference, and an EVGA Nvidia superclocked GTX550Ti card.
    I am however really not technically minded and I am not sure how to go about making sure that these products will be suitable before I purchase them.
    I have 3D gaming in mind (I have a 120hz screen) as I am a Warcraft player.
    Hope someone can help point me in the right direction or hold my hand as I am hopeless with stuff like this!

    Hi,
    You might have issues getting the Antec HCG-750W to fit.  Do some measuring and see it will fit, particularly the distance between the power supply and the optical drive.  I have see where PSUs of 750 and greater have failed to work in some HP PC's.
    Go with the Corsair CX600 or the CX500.
    I noticed that EVGA has lowered the PSU requirements for some video cards.  Look at this information for the 550 TI superclocked.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Compaq 6005 Micro Tower graphics/video card

    Having issues with PC.  Monitor screen splits whatever is open and it appears on both the top and bottom of the screen.  It has also had instance where large protion of the screen was black.  When this happens, can't get to the toolbar to do anything.  Computer freezes and only way to restart is by powering down.  Changed monitor and cables but still happening.  Thinking it must be graphic/video card.  Called HP and the guy said it was on the board and can't be replaced but everything I have read says card can be replaced.  Device Manager says it is a NVIDIA Quadro NVS295.  Drivers are up to date. 
    So, can I replace the card or not?  If so, which one do you recommend?
    Thanks in advance.

    Hi mchainmchainmch,
    I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • IMac Video Card Replacement

    Is there anyway to get the video card replaced in my iMac? Apple Care has expired and they replaced it just last year before it was over but it appears to have gone out again. I have a 24" Intel iMac which I purchased in Feb of 2010. I read online that it is not possible to replace myself because its sealed in but I recall when Apple replaced it last year the Genius telling me they just pop it out and replace but maybe I misunderstood.
    I'm not sure why it has gone out again we barely use it as I mostly use my MacBook. However, the MacBook also seems to be having issues with its video card.

    You will need to take it in for repair. You don't even know that the GPU has gone bad. It could be something else. If you attempt to repair it yourself, then Apple will no longer provide any future support whatsoever. Let them do the repair for you.

  • Drivers for HP 599980-001 ATI HD5450 512MB graphics video card

    I am looking for the Windows 7 Drivers for a
    HP 599980-001 ATI HD5450 512MB graphics video card
    if someone could please help

    Bocajoe, welcome to the forum.
    When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • How do I add a second video card to my Compaq Presario CQ5300F Desktop?

    I want to install a second video card to my Compaq Presario CQ5300F Desktop so I can use two monitors. What card should I get?

    Here are the specs for your Compaq Presario CQ5300F Desktop Computer. According to the specs, this model supports one VGA output via nVidia GeForce 6150SE onboard integrated graphics. This model also has a PCIe x16 graphics card expansion slot which will accept a PCIe x16 graphics card. According to the specs, installing a discrete graphics card in the PCIe x16 slot will disable the onboard integrated graphics.
    The graphics card you purchase must support both monitors you wish to use with your computer. Additionally, most retail graphics cards require a 300 watt or greater system power supply. Currently , your computer has a 250 watt power supply and it will need to be replaced. Please consider the Corsair CX430, CX500, or CX600 series of power supplies to meet the new graphics card power requirements.
    Alternatively, if this is mostly for word docs, spreadsheets, day trading and light video, you may wish to consider a USB-to-video adapter such as the eVGA UV Plus+ UV39 or one of the many other adapters on the market.
    If you have any further questions, please don't hesitate to ask.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • ThinkCentr​e USFF M57P 9071-A8U: I Want to Upgrade The Graphic Video Card

    Hello guys. I currently own an IBM Lenovo ThinkCentre M57p 9071A8U ultra small factor form. I already upgrade the CPU bios to 2RKT64BUS (01/08/14), an Intel Core 2 Quad Q6600 2.4 GHz Quad-Core, 4GB PC2-6400 memory ram and Windows 8.1. The integrated Intel Q35 Express video Chipset is great but I want to upgrade it. The system comes with a PCI-Express slot and a PCI slot riser on it. I actually changed the riser to a PCI/ADD2-R Riser V3.1 Adapter Card PCI-E:
    Link to image 1
    I had to do some adaptations to make this riser fit, but the system accepted the riser and all drivers were properly installed. This riser allows to install a PCIE x1 card. I bought a Lenovo 41T2725 ATI X1600 Pro 256MB Video Graphics Card (GV-RX16PIU-RH LVK-X1600):
    Link to image 2
    ATI does not support Windows 8 for this graphic card but I used Windows 7 64 bit drivers and software for this. I connect my monitor to the X1600 VGA port. The problem is that the computer boots until the Windows 8 logging screen and after that the screen gets black only showing the mouse cursor. At that particular point, if I unplug my monitor from the X1600 VGA port and plug it to the M57P VGA port, I can see and use Windows normally. But if I leave the computer plugged to the M57P VGA port, I would not see the ThinkCentre bios screen nor the Windows 8 logging screen. The screen is black until the Windows operating system screen. The Intel Q35 integrated video does the opposite of the X1600. This very confusing. I have tried playing with the bios video section but nothing has changed.
    I really would like to upgrade my video card on my system. Any help would be greatly appreciated! Thanking you in advance,
    Reaccion
    Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

    I noticed that there is an ATI Video BIOS Flash Utility for ATI Radeon X1600 Pro graphics adapters which will upate ATI Radeon X1600 graphics adapters to video BIOS S3A67621.109. :
    http://support.lenovo.com/en/downloads/ds000784
    This is for Windows XP (32-bit) only. I am using Windows 8.1. Would by any chance be an ATI video Bios flash for this X1600 Pro card for a 64 bit operating system??

  • Can I upgrade the graphics/video card?

    I just bought my son a brand new HP Envy 17-j130us 17.3-Inch Touchsmart Laptop with Beats Audio from Amazon.com. Now, I love Intel, but can the graphics card be upgraded? He likes those real intensive games, and well, he's earned it.
    Technical Details
    Expand
    Summary
    Screen Size 17.3 inches
    Max Screen Resolution 1600x900 pixels
    Processor 2.4 GHz Core i7-4700MQ
    RAM 12 GB DDR3L SDRAM
    Hard Drive 1024 GB
    Graphics Coprocessor Intel HD graphics 4600
    Wireless Type 802.11 A/C
    Number of USB 3.0 Ports 4
    Average Battery Life (in hours) 4.5 hours
    Expand
    Other Technical Details
    Brand Name HP Series Envy
    Item model number E8A04UA#ABA
    Hardware Platform PC Operating System Windows 8
    Item Weight 7.1 pounds
    Item Dimensions L x W x H 10.83 x 16.38 x 1.32 inches
    Color Natural Silver
    Processor Brand Intel
    Processor Count 1
    Computer Memory Type SODIMM
    Hard Drive Interface Serial ATA
    Hard Drive Rotational Speed 5400 RPM
    Optical Drive Type SuperMulti DVD burner
    Audio-out Ports (#) 1
    Batteries: 1 Lithium ion batteries required. (included)
    This question was solved.
    View Solution.

    No there is just no way to upgrade the graphics. That is true of almost all laptops. Are you still within the period to return it and buy something with better graphics?

  • Logic board or graphic/video card failure?

    I have an iMac Core 2 Duo (Late 2006) 2.16 GHz, max RAM. I have been getting kernel panics and/or the screen with gray overlay and the multilingual instructions to re-start. I don't know whether I have impending logic board, video/graphic card failure, or some other hardware issue. I am running the latest OS X - 10.6.8, Safari, iTunes and the latest update of ProTools LE 8. I don't want to go through the upgrade to Lion or PT 9, until I determine that I either have a fixable issue with this iMac, or that the repair would not be logical compared to a computer replacement. The graphic/video indications are periodic, momentary distortions (stretching) of the screen image (usually a single image or portion of an image), tv-like interference lines (sometimes green, sometimes black, sometimes persistent, sometimes intermittent). They don't appear to have a predictive function to the k panics or restart messages.
    Here is the crash report from this afternoon:
    Sun Jul 31 14:23:37 2011
    panic(cpu 0 caller 0x2abf6a): Kernel trap at 0x00296386, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x00c20000, CR3: 0x00100000, CR4: 0x00000660
    EAX: 0x52b0e280, EBX: 0x0000dae1, ECX: 0x00001a00, EDX: 0x0000dae1
    CR2: 0x00c20000, EBP: 0x494e3de8, ESI: 0x00c20000, EDI: 0x52b15560
    EFL: 0x00010206, EIP: 0x00296386, CS:  0x00000008, DS:  0x00000010
    Error code: 0x00000000
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x494e3bb8 : 0x21b837 (0x5dd7fc 0x494e3bec 0x223ce1 0x0)
    0x494e3c08 : 0x2abf6a (0x59e3d0 0x296386 0xe 0x59e59a)
    0x494e3ce8 : 0x2a1a78 (0x494e3d00 0x722d38c 0x494e3de8 0x296386)
    0x494e3cf8 : 0x296386 (0xe 0x48 0x10 0x500010)
    0x494e3de8 : 0x14a8e77 (0x7bb9a00 0xc18d20 0xdae1 0xbdfb5ee6)
    0x494e3e48 : 0x14a907e (0x7bb9a00 0x0 0x494e3e78 0x9b6f6c0)
    0x494e3e68 : 0x1031a10 (0x7bb9a00 0x0 0xe000400f 0x70a0000)
    0x494e3ec8 : 0x1044cf1 (0x67ae000 0x9b6f6c0 0xe000400f 0x70a0000)
    0x494e3f38 : 0x11a7aee (0x67ae000 0x7ced780 0x494e3f88 0x226e2f)
    0x494e3f58 : 0x10441b3 (0x67ae000 0x7ced780 0x494e3f78 0x2a45c9)
    0x494e3f78 : 0x230235 (0x67ae000 0x7ced780 0x494e3fc8 0x227cea)
    0x494e3fc8 : 0x2a179c (0x863ea0 0x0 0x10 0x71ef4c0)
          Kernel Extensions in backtrace (with dependencies):
             com.digidesign.mbox2.driver(8.0.5f2)@0x14a5000->0x14c4fff
                dependency: com.apple.iokit.IOAudioFamily(1.8.3fc2)@0xee4000
                dependency: com.apple.iokit.IOUSBFamily(4.2.4)@0x102a000
                dependency: com.apple.driver.AppleUSBMergeNub(4.2.4)@0x119d000
             com.apple.driver.AppleUSBUHCI(4.2.0)@0x11a1000->0x11b0fff
                dependency: com.apple.iokit.IOUSBFamily(4.2.4)@0x102a000
                dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x909000
             com.apple.iokit.IOUSBFamily(4.2.4)@0x102a000->0x105ffff
                dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x909000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10K540
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
    System model name: iMac5,1 (Mac-F4228EC8)
    System uptime in nanoseconds: 171143033883
    unloaded kexts:
    com.apple.driver.AirPortBrcm43xx          423.91.27 (addr 0xb97000, size 0x1900544) - last unloaded 101759967210
    loaded kexts:
    com.digidesign.mbox2.driver          8.0.5f2 - last loaded 31652196451
    com.paceap.kext.pacesupport.snowleopard          5.7.2
    com.digidesign.iokit.DigiDal          8.0.5f2
    com.digidesign.mbox2.boot.driver          8.0.5f2
    com.apple.filesystems.autofs          2.1.0
    com.apple.driver.AppleHWSensor          1.9.3d0
    com.apple.driver.AppleHDA          2.0.5f13
    com.apple.driver.AudioAUUC          1.57
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AudioIPCDriver          1.1.6
    com.apple.driver.AppleUpstreamUserClient          3.5.7
    com.apple.driver.AppleMCCSControl          1.0.20
    com.apple.driver.AppleLPC          1.5.1
    com.apple.driver.AppleIntelMeromProfile          19
    com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
    com.apple.kext.ATIFramebuffer          6.3.6
    com.apple.driver.AppleBacklight          170.0.46
    com.apple.ATIRadeonX1000          6.3.6
    com.apple.driver.AppleIRController          303.8
    com.apple.driver.Oxford_Semi          2.6.1
    com.apple.iokit.SCSITaskUserClient          2.6.8
    com.apple.BootCache          31.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.driver.AirPortBrcm43224          428.42.4
    com.apple.iokit.IOAHCIBlockStorage          1.6.4
    com.apple.iokit.AppleYukon2          3.2.1b1
    com.apple.driver.AppleHPET          1.5
    com.apple.driver.AppleUSBHub          4.2.4
    com.apple.driver.AppleAHCIPort          2.1.7
    com.apple.driver.AppleIntelPIIXATA          2.5.1
    com.apple.driver.AppleFWOHCI          4.7.3
    com.apple.driver.AppleUSBEHCI          4.2.4
    com.apple.driver.AppleUSBUHCI          4.2.0
    com.apple.driver.AppleEFINVRAM          1.4.0
    com.apple.driver.AppleRTC          1.3.1
    com.apple.driver.AppleACPIButtons          1.3.6
    com.apple.driver.AppleSMBIOS          1.7
    com.apple.driver.AppleACPIEC          1.3.6
    com.apple.driver.AppleAPIC          1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
    com.apple.security.sandbox          1
    com.apple.security.quarantine          0
    com.apple.nke.applicationfirewall          2.1.12
    com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
    com.apple.driver.AppleProfileReadCounterAction          17
    com.apple.driver.DspFuncLib          2.0.5f13
    com.apple.driver.AppleProfileTimestampAction          10
    com.apple.driver.AppleProfileThreadInfoAction          14
    com.apple.driver.AppleProfileRegisterStateAction          10
    com.apple.driver.AppleProfileKEventAction          10
    com.apple.driver.AppleProfileCallstackAction          20
    com.apple.iokit.IOSurface          74.2
    com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
    com.apple.iokit.IOSerialFamily          10.0.3
    com.apple.iokit.IOAudioFamily          1.8.3fc2
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.iokit.IOFireWireIP          2.0.3
    com.apple.driver.AppleHDAController          2.0.5f13
    com.apple.iokit.IOHDAFamily          2.0.5f13
    com.apple.iokit.AppleProfileFamily          41
    com.apple.driver.AppleSMC          3.1.0d5
    com.apple.driver.IOPlatformPluginFamily          4.7.0a1
    com.apple.driver.AppleBacklightExpert          1.0.1
    com.apple.iokit.IONDRVSupport          2.2
    com.apple.kext.ATI1600Controller          6.3.6
    com.apple.kext.ATISupport          6.3.6
    com.apple.iokit.IOGraphicsFamily          2.2
    com.apple.driver.CSRUSBBluetoothHCIController          2.4.5f3
    com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
    com.apple.iokit.IOBluetoothFamily          2.4.5f3
    com.apple.driver.AppleUSBHIDMouse          162
    com.apple.driver.AppleHIDMouse          162
    com.apple.driver.AppleUSBMergeNub          4.2.4
    com.apple.iokit.IOUSBHIDDriver          4.2.0
    com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.8
    com.apple.iokit.IOUSBMassStorageClass          2.6.7
    com.apple.driver.AppleUSBComposite          3.9.0
    com.apple.iokit.IOFireWireSerialBusProtocolTransport          2.1.0
    com.apple.iokit.IOFireWireSBP2          4.0.6
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
    com.apple.iokit.IOBDStorageFamily          1.6
    com.apple.iokit.IODVDStorageFamily          1.6
    com.apple.iokit.IOCDStorageFamily          1.6.1
    com.apple.driver.XsanFilter          402.1
    com.apple.iokit.IOATAPIProtocolTransport          2.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
    com.apple.iokit.IO80211Family          320.1
    com.apple.iokit.IONetworkingFamily          1.10
    com.apple.iokit.IOUSBUserClient          4.2.4
    com.apple.iokit.IOAHCIFamily          2.0.6
    com.apple.iokit.IOATAFamily          2.5.1
    com.apple.iokit.IOFireWireFamily          4.2.6
    com.apple.iokit.IOUSBFamily          4.2.4
    com.apple.driver.AppleEFIRuntime          1.4.0
    com.apple.iokit.IOHIDFamily          1.6.6
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          6
    com.apple.driver.DiskImages          289.1
    com.apple.iokit.IOStorageFamily          1.6.3
    com.apple.driver.AppleACPIPlatform          1.3.6
    com.apple.iokit.IOPCIFamily          2.6.5
    com.apple.iokit.IOACPIFamily          1.3.0
    Thank you for any help

    See
    What is a kernel panic,
    Technical Note TN2063: Understanding and Debugging Kernel Panics,
    Mac OS X Kernel Panic FAQ,
    Resolving Kernel Panics, and
    Tutorial: Avoiding and eliminating Kernel panics for more details.

  • Early 2008 Video Card Replacement Question

    BACKGROUND
    Hardware Overview:
    Model Name:                       Mac Pro
    Model Identifier:                  MacPro3,1
    Processor Name:                  Quad-Core Intel Xeon
    Processor Speed:                  2.8 GHz
    Number of Processors:         2
    Total Number of Cores:        8
    L2 Cache (per Processor):     12 MB
    Memory:                               10 GB
    Bus Speed:                            1.6 GHz
    Boot ROM Version:                MP31.006C.B05
    SMC Version (system):          1.25f4
    NVIDIA GeForce 8800 GT:part number 630-9898
    Chipset Model:        NVIDIA GeForce 8800 GT
    Type:                       GPU
    Bus:                         PCIe
    Slot:                         Slot-1
    PCIe Lane Width:      x16
    VRAM (Total):           512 MB
    Vendor:                    NVIDIA (0x10de)
    Device ID:                 0x0611
    Revision ID:              0x00a2
    ROM Revision:          3233
    Displays:
    SyncMaster:
      Resolution:                       1920x 1200 @ 60 Hz
      Pixel Depth:                      32-BitColor (ARGB8888)
    SyncMaster:
      Resolution:                       1920x 1080 @ 60 Hz
      Pixel Depth:                      32-BitColor (ARGB8888)
    I run one XP drive for games (primarily Flight Simulators) and music/video (CD/DVD) conversion (Danisoft/SlyFox).  Mostly stuff that I have yet to find an equivalent that will run on Mac OS.  I run one drive with Lion: MSOffice for Mac, iTunes, iPhoto, iMovie, etc (main use drive).  I run one drive with Snow Leopard: still have some stuff that requires Rosetta but is little used.  (Thinking about creating a Snow Leopard partition on my Lion drive and using my current Snow Leopard drive for additional storage.)  I run one drive thatis purely storage.  Everything is backedup to a 2TB Time Capsule using Time Machine. Op systems also backed up to Hitachi 2TB G-Drive using Carbon CopyCloner as well as all important files backed up there as well.
    Video card failed.  Ifixed it using the ‘bake it in the oven’ trick. (http://www.youtube.com/watch?v=T7um_hZYom4)  However, still thinking about replacing the card.  There are three Apple part numbers foravailable/comparable video cards.
    630-9898 – This is the part number ofthe card currently installed.  Best pricefound is $586.37
    661-4642 – This card is listed as newwith no choke.  Best price found is$242.00.
    661-4854 – This card is listed as new‘with Choke’.  Best price found is$246.00.
    Then, I see where some are replacingthe NVIDIA cards with ATI’s.
    5770 – $249.00 from Apple.
    5870 – $449.00 from Apple.
    QUESTION
    Based on my current gaming on the XPdrive and the primary use of the Mac OS drives being general purpose (with moreand more getting into iPhoto and iMovie), what are the feelings of the community on which replacement vid card to purchase?  (Note: To date I have not had any issues with noise or smoothness using the 8800.  But who knows what I might want to do in the future and I want to be prepared as best Ican without spending the $1500 on that really high end card.)
    TIA

    You should look at those Apple version of the ATI Radeon 5770 and 5780 video cards.  They are the current mac pro cards but will work in 2008's.
    The 5770 requires one aux power cable and the 5870 requires two.  Both have two mini-displayports and a dual link DVI port.

  • In need of a new Graphics/Video card,..which one?

    My computer stopped booting all the way a couple of days ago. Took it to Apple store where they told me I need a new Graphics card. As of now I have:
    Chipset Model: NVIDIA GeForce 7300 GT
    Bus: PCIe
    PCIe Lane Width: x16
    VRAM (Total): 256 MB
    Vendor: NVIDIA (0x10de)
    ROM Revision: 3011
    Does anybody have a suggestion on which one to get?
    When it comes to that stuff, I have no clue which one is good/better etc.
    Any help would be appreciated. I would be willing to spend $250-$350 unless I get an amazing one for a bit higher.
    I don't do a lot of graphics work on the computer, but, I do like my computer games.
    I was looking at this on OWC:
    http://eshop.macsales.com/item/ATI%20Technologies/100435928/
    (ATI RADEON 3870 256-bit 512MB GDDR4 16x PCIe Video Card for the Mac Pro with two Dual-Link DVI Ports, supports two 30" displays! Supports HDMI output up to 1920x1080!)
    Thanks

    Then, if I look on comments on the Apple website, some people say it does work on older models, some say it does not because this card requires PCI Express 2.0??
    The card is PCI Express 2. Your Mac Pro has just standard PCI Express. However, that doesn't matter , since PCI Express 2 was designed to be compatible with standard PCI Express. Any PCI Express card (2.0 or not) can be used in any PCI Express slot (2.0 or not). Of course you only get 2.0 speed if the card and slot are both 2.0.
    PCI slot 1 (the lower slot) in your Mac Pro is a 16x slot, and will provide plenty of speed for the card. It is unlikely that an older Mac Pro could send data any faster than that slot could handle. The new Mac Pros have faster memory, and might be able to use the extra speed of PCI Express 2.0.

  • IMac 21.5 Video Card Replacement?

    Hi all,
    I have been searching everywhere to find out if i can replace the graphics card on my iMac.  its a late 2009 21.5 iMac and I've tried everything i can to try and get a work around.  i currently don't have a keyboard/mouse, and have stripped the screen out of the tower to find more information.
    my problem was that the mac booted fine, id hear the chime, fans, HDD, but no screen.  used a flashlight to see if it was the backlight, nothing. searching for the serial says theres 2 possible configurations, and i fear that mine is not a replaceable card.  serial is W89410H75PC and the model is EMC-2308.  i'll try and attach a photo of the 'foot' of the machine so everyone can see all the info i can.  i also tried to attach a second monitor, a samsung tv which i use with my macbook pro, but had no luck.  whilst stripping it out, i had a go at looking at the diagnostic LED's, and i think i saw 1 ON, 2 ON, gap, 4 ON. but they are hidden by the bezel/faceplate at the bottom and its hard to work out which is which.
    thanks for any help, this mac was a discarded item, so ideally id like to try anything to get it working and even soldering a new board on if i can source a replacement is a realistic option,
    regards,
    Alex

    MichelPM wrote:
    There is a new GPU replacement program for mid  2011, 27 inch iMac models.
    If your iMac serial numbers end with certain letters, your iMac maybe eligible for a no cost replacement GPU.
    Contact either Apple directly at 1-800-MYAPPLE or contact your nearest Apple store and ask about this and make an apappointment at the Genius Bar to bring in your iMac if your iMac is eligible for the free GPU replacement.
    http://www.macrumors.com/2013/08/16/apple-initiates-graphic-card-replacement-pro gram-for-mid-2011-27-inch-imac/
    Good Luck
    That's right, I totally forgot about this program.

  • PCI video card replacement for PowerMac G3 (Blue and White)

    Hi, I am new to this forum. I apologize if this issue has been addressed before, but I have been reading over the forum for the last 2 days and tried all the steps I could find. I have an old PowerMac G3 (Blue and White).
    It used to run fine. I had a friend with a similar computer and he
    needed a video card, so I gave him the one in my Mac G3, because I was not using it at the time.
    Now, I have decided I want to use it. I am running into an issue with the video (It takes PCI), I get no display, but I can hear the hard drive spin, it lights up, I hear the Apple "ding".
    I have about 6 PCI video cards laying around, and I have tried all of them, resetting the CUDA each time. Still cannot get a display.
    I have tried different slots on the motherboard, checked the PRAM battery, (it was good). Tried booting off a live Linux CD for power PCs, tried the commandoption+pr until I hear the apple "ding" go off 2x, I have tried a different monitor and monitor cable.
    Nothing seems to work, I need to know what I should try next.
    Thank you for your help in this matter.

    "I have about 6 PCI video cards laying around, and I have tried all of them, resetting the CUDA each time. Still cannot get a display."
    If these graphics cards are designed for use in PCs, they won't work in your Mac. Compatible graphics cards must be programmed with a Mac ROM. Some "PC" cards can have their EEPROM chip flashed with a Mac ROM, provided that someone has extracted the particular Mac ROM code for the card in question. A web search will provide leads for that. If you just want a decent graphics card, go for a Radeon 7000 Mac Edition (2002 vintage card). If you check eBay, you should be able to find a flashed "PC" Radeon 7000 card. I'd try to get the one with 64 MBs of DDR memory, as opposed to the 32 MB model. If you don't mind spending more $$, you can find a more current PCI graphics card for your G3, like the Radeon 9200 at Other World Computing.

  • Code 43 error after updating Intel HD graphics video card

    Hello.
    My HP Pavilion G6 laptop consists of 2 graphics cards:   1- Intel HD Graphics Family
                                                                                                              2- Radeon HD 6470M
    I opened my device manager today, and i tried to update my Intel HD Graphics . Turns out there was an update for it, and after it was done, it displayed Intel HD Graphics 3000. That was after i rebooted my computer.
    After the reboot, my Intel card updated. However I re opened the device manager, and i see that the Radeon HD 6470M has an exclamation mark on it. I opened the properties and i see a message saying: Windows has stopped this device because it reported issues(Code 43) . This occured after i updated my Intel card.
     I fixed it with system restore. But can someone tell me why this happened? The HP Support Assistan said that there is no updates available, so the device manager should determine that the Intel card is up to date.
    Any help? Thanks.
    This question was solved.
    View Solution.

    Don't know what driver you have installed but the latest version is 8.882.2.0 Rev. released Jan 14, 2015
    You may get this driver from here should you wish.
    http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g6-Notebook-PC-series/5145704/model/5170...
    Instead of using system restore you may right click the driver in Device Manager and Roll back the driver, makes it easier for you.
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • Question About graphics video card for Macpro 1,1 and Final Cut Pro X

    Hi, I have Mac pro 1,1 and I want to install Final Cut Pro X, I want to know the graphics video that i need to buy to use. Thank you!Pro

    See if this is of any help. http://forums.creativecow.net/thread/335/8157
    Russ

Maybe you are looking for

  • PO and GR value differs

    Hi Seniors,   PR XXXXXX contains the following data - 900 EA, net price - 436.67 RUB/ 1 EA, total valuation for the item = 393003 RUB. Item of PO XXXXXX created with the reference to this PR item. It contains the following data - 90 CS (10 EA in 1 CS

  • How do I select part of a clip to import in Final Cut Pro 10.0.7?

    Greetings. I'm a newby in FCPX.  I've been watching Michael Wohl's tutorial and it looks like I should be able to mark parts of clips stored on my HD to import into the event browser.  But I don't seem to be able to mark the clips with either the "i

  • Totaling specific value within data

    I have data that contains a bunch of "Y" (yes) and "N" (no) values. I want to total up only the "Y" values. The only way I have found so far is build another column with 1's and 0's, then sum that column, but that looks goofy. Any ideas? I cant seem

  • HT1695 It's complicated! The wi-fi does'nt want to connect with my iPad, but it connects to every thing else

    I just bought an iPad about 3 hours ago and it wont connect to the wi-fi at home. All of my other Apple products connects fine. My MacBook Pro, my iPhone and my parents iPads. My iPad Will connect to other wireless networks. I have tried to turn all

  • Rotate a page

    I'm using adobe on a android tablet, is it possible to rotate a page