Graphics works till desktop start up menu,then laptop Shuts down

I m using a compaq presario cq-61 312-tu,tx.i m having a problem with my video card, when i enable my graphic driver my system starts normally till the log in menu and shuts down immediately with blue screen error,so should i change my video adapter or procedure to install the drivers to my laptop(if driver problem),so what should i do?n this all happened because when i was away to other place due some work,my brother has updated the bios..so i need exact bios driver that was installed to my laptop

Hi Rakesh_talwar,
I understand that you are having a problem with your video card driver for your Compaq Presario CQ61-312TU Notebook PC.  I will try my best to help you with this.
In this document for Downloading or Updating Software and Drivers for HP Computers it explains how to update the drivers. Try these steps to see if they resolve your issue.
In this document you can try Restoring the BIOS to the previous version, which may resolve the issue as well.
I hope this helps, please let me know how it goes.
Thank you and have a great day.
I worked on behalf of HP.

Similar Messages

  • When i plugin my iPhone 4s to the mac, pc o wall, it starts charging, but then it shuts down

    When i plugin my iPhone 4s to the mac, pc o wall, it starts charging, but then it shuts down.
    I tried restoring, reseting, putting in DFU mode, everything.
    But it keeps doing the same thing, sometimes it shuts down exactly when i plug it in.
    A friend told me it may be something electric with the connector.
    Im from Argentina, but my aut is travelling to the US this friday, can she take it to the Apple Store and find a solution ???

    Hi,
    If you are able to sign in at https://supportprofile.apple.com/ with the Apple ID that you did use to register your iPhone, you shall be able to access the information regarding your device and its own warranty.
    If your iPhone is not yet registered, you can register it by entering its serial number on your profile.
    Then, you shall also be able to automatically contact Apple and report the problem. They might even send you another iPhone by mail and provide you with an empty box to return the problematic one.
    Hope this help.
    P-

  • [Solved] Loud pop noise, then laptop shuts down

    So, I heard a loud "pop" noise like what happens when the power goes out, my laptop shut down. When I turned it back on, it didn't show that it was charging. So, I plugged in another power supply, when I used another one, it showed that it was charging. So, did my power supply go bad, and will msi replace it?

    I agree with this one. If AC adapter is from them too just like the laptop (some don't provide AC adapter mostly on used one) then they should replace it. It will be considered a factory defect.
    Quote from: Svnyster;109620
    Sounds like it may be a blown capacitor. As long as you're still under warranty, MSI should replace the failed AC adapter. I'd say to just contact their support and see what they say.

  • I started an update then accidentally shut down firefox while the update was going on. Reopen FF and update box didn't reappear. How to finish updae?

    The update box was in progress when I closed FF and the updater also closed at that time. When I reopened FF, the update box didn't reappear. How do I finish updating?

    You can try the alternate and easiesr way by downloading here
    * getfirefox.com

  • My iMessages won't work. It starts to verify, then it goes back to the Apple ID and password screen.

    My iMessages won't work. It starts to verify, then it goes to the Apple ID and password screen.

    See:
    iOS: Troubleshooting FaceTime and iMessage activation

  • I can't start AE. Ae always shuts down. There is a Problem with the "AEDynamiclinkServer". I tried everything. But it doesn't work. How do I get AE back to work?

    I can't start AE. Ae always shuts down. There is a Problem with the "AEDynamiclinkServer". I tried everything. But it doesn't work. How do I get AE back to work?

    What "everything" have you tried?
    What exact version number (down to the last decimal) is your AE?
    What OS are you using?
    What are your other system specs?
    When did it work last? What happened between then and now?
    FAQ: What information should I provide?

  • I have MacBook Pro and whenever I start Aperature 3 it stays on for about 5 minutes then it shuts down with an error of shutting down unexpected... anything??

    Hello, I have MacBook Pro and whenever I start Aperature 3 it stays on for about 5 minutes then it shuts down with an error of shutting down unexpected... anything??
    Also does anyone know how to take something from one picture and add it to another in aperature?
    Thank you!!!

    I had the exact same problem. Here is what an Apple Support person told me to do - and it worked like a charm!
    Go to your APPLICATIONS Folder. Find a folder within that folder called TOOLBARS. Remove the ENTIRE folder. Once you remove that folder, your Aperture should work perfectly.
    There is something in that folder that you don't need that messes with Aperture. Try it. Mine worked perfectly!

  • My power mac g4 was working fine i hit a key and it shut down and now it has the symble of the firewire slot floting around the screen and i can not get it to start back up

    my power mac g4 was working fine i hit a key and it shut down and know it has a symble floting around the screen like the firewirs symble and ot wont turn back on how do i fix it

    It does sound like the T key is stuck.
    One way to test to see if the keyboard is at fault is to disconnect the keyboard, then start up the Mac.
    Note - on that model, you can force a shutdown by holding in the power button (the one on the front panel of the machine) for 8 to 10 seconds.
    You can also force a restart by pressing the small convex (bulges out slightly) button under the power button on the front panel (it's the one on the left).

  • HT4061 my iphone dose not start it was stuck in restoring mode then it shut down and it won't start what shall i do

    my iphone dose not start it was stuck in restoring mode then it shut down and it won't start what shall i do

    If this has happened more than once the problem is likely on your PC.
    See here: http://www.apple.com/support/iphone/assistant/itunes/

  • Power on button not working on Compaq CQ57-229 WM Notebook after shut down

    My Compaq Presario CQ57-229WM Notebook PC power on/off button is not working properly.  When I shut down computer, the power light stays on.  I have to remove the battery to get the power light to turn off, then it turns back on and i can restart computer.  If i have the battery removed, and just plugged into power strip, i have to remove the power cord to get the light to turn off then to turn back on to restart computer.  the operating system iw Windows Hoem 7-64 bit.

    So you are turning it off with the hardware on-off switch? Go into power options in the control panel and click "choose what the power button does"...what does it say? Generally you want to turn it off with software and by that I mean the Windows key on the keyboard then choose shut down from the popup menu. You may have it set to sleep or  hibernate when you hit the power button.

  • Downloaded videos play for 10 seconds then iTunes shuts down

    Have downloaded 2 videos from Music Store. They work well on my new iPod 30GB, but will not play on my PC. Reasonably good spec PC - AMD Athlon XP2000+ processor, 512 RAM, 128MB Graphics RAM (nVididia GeForce fx5200)and I have no problem playing DVDs on my PC. The video clips play for 10 seconds then iTunes shuts down giving my a Windows error message. Any thoughts?

    Since downloading the video from iTunes Music store my songs downloaded from Nusic Store will no longer play either. It prompts my to enter my password (which I have checked and changed) but they still will not play

  • [W520] Does not start on battery only, doesnt shut down or sleep

    Hi all, 
    I have quite a huge problem after flooding my W520 with tea. Obviously immediately after spilling it I flipped the machine, unplugged ac, took out the battery. Few days after laptop didnt start so I had it serviced. The keyboard was changed and whole interior was cleaned. At home I tried to power on the laptop (with battery only) but with no reaction, then plugged ac and computer started itself (I didnt press the power button). When it starts it is possible to unplug the ac, and it works on battery. 
    Second problem is that the machine doesnt want to powerr off or sleep. It shuts down for 2-3 second then automatically starts (both on ac and when already started with battery). To shut down I have to take out the battery and ac. (Tried all possible stuff, WOL, Always on mode and so on but nothing works) ;/
    Called the service with explanation but nobody seemed to know how to fix it. If you have any ideas that could solve the problem please help...

    Hi,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that you spilled tea in your Lenovo ThinkPad W520 and you are facing multiple issues with the system.
    I would suggest you to perform Flee Power – remove the battery and any other peripheral device connected to the computer. Hold the power button for 10-15 seconds and then connect the AC Adapter and battery and try to turn ON the computer.
    I would suggest you to update BIOS to the latest version, try swapping with a good known AC adapter and battery.
    Basically there's 3 power sources for the motherboard ac adapter, laptop battery and CMOS battery. If either of them goes bad or is malfunctioning you might experience strange behavior. If you have confirmed the functionality of the above said, it probably points to a system board failure.
    Regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • IMac shut down unexpectedly. I tried to restart and it did for a bit, then immediately shut down again.  I've had it for 3 years and this is the first problem. I can't turn it on to give specs.  Any suggestions?

    I purchased an iMac approx 3 years ago.  We keep it on almost all the time, however the other night we noticed it was off.  We did not shut it off as we were downstairs watching a movie.  I unplugged the cord, waited 10 to 15 seconds, plugged it back in, wait for a few more seconds and turned it on.  It started up and was almost done booting.  Then it shut down again and I have only gotten it to attempt to turn on.  (the fan kicks in for about 2 seconds and then nothing) Any suggestions?

    Try that process of resetting the SMC two or three more times, sometimes it takes more than once. if that doesnt work I could only suggest making an appointment and hauling it in for service.

  • On starting up, my macbook pro shuts down after 25 seconds of booting up.

    Hi there. On starting up, my macbook pro shuts down after 25 seconds of booting up. The time bar comes on for a while before it simply goes blank and switches off without any notification. Battery iappears charged. Could it be a virus? Help please!! O

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Satellite E45t won't start for few hours after shut down

    I have a brand new Satellite E45t-4100. After shutting down, I am not able to start the laptop for few hours. Upon pressing the power button, say after 15 minutes, power button LED lights up but nothing is displayed on the screen. I have disabled the sleep mode from power settings as I was facing the similar situation when trying to wake up the laptop from sleep. Although, when restart is chosen, laptop restarts without any trouble. 
    Please help.

    Hello,
    I have the exact same problem as the OP with an E45t-a4300. Purchased almost a year ago (Oct 30, 2013) from Best Buy. Worked perfectly for about 2 months after purchase and then this problem arose. Started when I'd put the computer to sleep, it wouldn't wake up. The computer would just shut off when I'd go to wake it up. When I'd hit the power button to restart, the fan would briefly spin, power indicator/wifi light turns on, then it shuts down again. I would repeat this cycle- sometimes only a few times, sometimes for almost an hour- before the Toshiba splash screen appeared with the "computer wasn't shut down properly"  and the computer would restart and run the standard diagonostics. However, at first on a cold start or start from hibernation it would start fine but after awhile that stopped, too, and any starting attempt was met by the same non-start/shut down cycle. 
    This went on for about 3 months with me basically rarely shutting down the machine. I searched forums at the time and found nothing regarding this problem. Then one day in mid-March, the start-up problem miraculously disappeard- it fired right up. It started perfectly fine and worked with no problems whatsoever for 6 months, including waking from sleep and hibernation, until about 2 weeks ago. Now the same problem is back- it won't turn on with multiple start attempts and shuts down when you try to wake from sleep or hibernation- showing the "computer wasn't shut down properly" on the splash screen and going through the test process when if finally does start. Also, I'm now unable to enter the BIOS page on start up when pressing F2.  I also have disabled rapid start, etc after the problem began.
    I've owned quite a few laptops over the years (including Toshiba) and work with computer based systems for a living. I REALLY love this laptop a lot (yes, even with 8.1) but this problem is just disheartening. I truly appreciate any help.
    Thanks!!

Maybe you are looking for

  • Error while executing Automatic Workflow Customizing

    Hi!!!!!! In ECC6.0, i need to activate all the workflows in SWU3 (Automatic Workflow Customizing), but i was able to activate only some of the steps, remaining is still in red mark. While executing "Schedule Background Job for Missed Deadlines", it i

  • Transportation mode from Sea to Air(AFS route determination)?

    Dear Gurus, 1. PO is created and the ex-factory date in PO is 19th Dec 2010 and 2. Delivery date in PO is 27th Jan 2011 and now, the transportation mode is by default coming as ZS(Sea) through AFS route determination process.Now, user is trying to ch

  • Rounding for Percentages

    Please advise someone. I have written the logic to calculate certain components in our application based on percentage. For example we take a percentage of Total Net Earnings. When I hard code the percentage in the logic the formula works to the prec

  • Gcc/linker error

    Hi, the code below causes a very strange error: if compiled in debug mode with zerolink, the compiler succeeds, but the executable cannot be debugged (it crashes at runtime with a zerolink error). if compiled in release mode, ld gives explicitly an e

  • Batch name change in FCP, possible?

    Hey folks are there any plugins, apps, scripts out there than can facilitate batch renaming of clips in FCP rather than getting it done one file at a time? FYI using FCP 6. I've done some digging around and can find ways to batch rename on the finder