Graphite 1500 and Synergy 2150 compatibility

Hi Folks,
Help required. Story and query:
I had a BT Synergy 2150 with 4 additional 2100 handsets. Eventually I had to replace a couple of the 2100s with 2150s and, later still, swapped the whole thing for a Graphite 1500 Quad set up. Following a question from me, the helpful salesperson at BT assured me I could use one of the working 2150s as the fifth handset - and I did! That handset has now failed, so I should like to use another of the working 2150 handsets as the fifth handset - but I have completely forgotten how I can register this 2150 handset to the Graphite base! Can anyone help?
The Synergy set up was all in the instructions but I can find no instructions for registering with the Graphite. There must be a way as I did it once, successfully.
Any advice appreciated.

Hi Beau_Block
Welcome to the Community.
Have you referred to the userguides for both phones, I'll be honest this isn't something I am overly technical on, but if you have mislead the userguides you can access them here.
Synergy 2150
Graphite 1500
Hope they help let us know how you get on.
Cheers
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Similar Messages

BT Graphite 1500

I have bought a BT Graphite 1500 - is this a new model??
The main question - can I adjust the volume of the handset for incoming calls?
I hope someone can help.
Stuart

Hi and welcome.
Yes the Graphite is still a current model supplied by BT, have a check here in the user guide.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

BT graphite 1500 - answer phone messages cut short

Does anyone know how to stop messages that are left on the answer phone being cut off in the midde when replayed. I cannot find any hlep in the user guides about how to extend the amount of time given to the actual messages left. thanks

I did some searching for you and found that this is a known issue with the graphite 1500. there is a fix for it apparently. i found this on another forum:
"we are experiencing the same problem with a BT Graphite 1500. There is no info on website about this but after experimenting found a fix. if you press the ffwd skip button down until you see the numbers start to swirl then - you can record a msg yourself which i did for 2 mins. this seemed to kick in the answer phone length and now it works fine…"
So it seems like recording your own outgoing message should fix the problem. if you have already recorded an outgoing message, just try and replace it with a fresh one. Post back and let me know if it worked!

BT Graphite 1500 answer phone

Hi, I have had my Graphite 1500 for a couple of years, but have found that despite repeated corrections, the day and time for answer phone messages keeps becoming incorrect. For example, I received a message this morning, Monday AM, but the message was timed as Friday PM. I keep resetting to the correct time, but it goes out again. I haven't monitored how long it takes before things go wrong. I read on another post about a different model that this can because if the year is set incorrectly during set up. But there is no option for the year to be entered.
Any help would be appreciated.
Solved!
Go to Solution.

Could it be that someone switched the answer machine off by accident?
Use the "Ans on/off" button to switch the answering machine on or off. By pressing the "Ans on/off" button you can scroll around the 3 options:
- Answer only;
- Answer off;
- Answer and record.
Let us know if that did the trick.
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Iphone and windows 8 compatibility?

When is apple going to fix the iphone and windows 8 compatibility? All I get is the "waiting for changes to be applied" message. I can't sync my phone.

I have no issues with Win 8 working fine with the latest (win 8 compatible )
iTunes

Itunes and windows 8 compatability Hi just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies. ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows 7

itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam

itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam

ILife 08 and iMovie 06 compatibility issues?

Sorry if any of this has already been covered in other threads...
Has anyone had a chance to thoroughly test the 6.04 version of iMovie (download version if you install iLife 08) and know what compatibility issues there are?
I.E. How well does iPhoto 08 play with iMovie 06, or iMovie 06 with iDVD 08. Are the third party plugins problematic with v6.04?
From what I saw at the Apple store, iPhoto08 and iDVD08 would be the only apps that I would really want since iMovie08 seems to be a step backwards and iWeb is still lacking in everything that I wanted improved. But I don't want to waste the money to discover all sorts of "gotchas" with trying to get iMovie06 to play nice with the rest of iLife08...
Also, has anyone done an install excluding iMovie08 entirely? Do you still need to download 6.04 if installed this way? Are there any pitfalls?
This is like Deja vu or something...When iLife06 first came out, I installed everything but iMovie and stuck with iMovie05 for a long time cause of all the bugs and how long it took to get the third party plugins working...

Of all the things for people to moan about with iMovie '08, the real unfortunate thing is it's inability to import effects, etc. (essentially your completed movie) from iMovie HD. One could somewhat forgive Apple for this debacle, if only it played nice with iMovie HD. Then it could be everything it's supporters say it is, i.e. "a different app," "a simple app for simpletons in a hurry" (although I find it's lack of tools and compatibility issues more difficult to manage).
...and a lot of us feel like this is the thing we're going to be stuck with going forward.
I keep thinking that something else is going to happen, because this can't be right. I think this diver/video engineer who came up with this concept is suffering from the bends.
Apple doesn't need the money, (as in making us buy Final Cut Pro for decent video editing), trust me, so I don't understand why it would take the PR hit.
iMovie '08 spoofs are already on YouTube, etc.
Message was edited by: rmig68

CS4 and Windows 8 compatibility

Has anyone successfully installed CS4 on Windows 8? I am currently using Windows XP and received a pop up saying Microsoft are no longer releasing updates for XP after August and I am entitled to a free download of Windows 8. I am trying to decide whether to do this but risk losing my use of CS4 which I really don't want to do. Any advice much appreciated as not sure whether to just continue with XP. Thanks in advance.

If you search Google using the terms "CS4 and Windows 8 compatibility" you can probably find various results from both Adobe and Microsoft that should give you some idea of how much of a gamble you might face in changing your OS.
In my own experience, a change in OS has yet to be a positive experience... while most people loved XP in its day, I suffered years of poor performance with it as an upgrade from the moment it was installed and regretted doing it. Maybe you've had better experience and aren't as shy of it as I am.

Player 10.1 and Air using Compatibility Mode

This is related to post at http://forums.adobe.com/message/2933137#2933137, but, thought I should start another since that one is marked answered.
I'm having a similar issue with an Air app, but, I am using 4.1 SDK (and LCCS 10.1 swc), but still getting the same error regarding GroupSpecifier (pasted below).
I have an Air app project and related web app project, which both use a library project (ARSystemLib in the trace below). The library project is using 4.1 SDK, and has the Flex 3 compatibility mode turned on, along with 10.1.0 set as "use a specific version" under "Flash Player Options". The Air project is also using 4.1 SDK and Flex 3 compatibility, along with the compiler option "-target-player=10.1.0".
For the web app, I had to remove the "Use a specific version" of 10.1.0 for it to compile ( was getting many "Classes must not be nested", which seems to be a difficult issue to fix after much research on others getting this message).
I'm okay with the web version not using 10.1 for p2p, but, critically need this for the Air version. I'm hoping it's not the "Compatibility" mode setting, as reworking the app without is a huge undertaking.
Thanks,
David
VerifyError: Error #1014: Class flash.net::GroupSpecifier could not be found.
at com.adobe.rtc.session::ConnectSessionContainer()[/Users/arun/Work/aponnusa_theoden.corp.a dobe.com_1666/depot/branches/connect/1010/cocomoPlayer10.1/src/com/adobe/rtc/session/Conne ctSessionContainer.as:112]
at com.ssc.compo

Hi David,
Apologies for the delayed response. I am guessing you will have to update the namespace in your <PROJECTNAME>-app.xml file under src of your project.
Your name space should be 2.0 or greater.
Its possible that your app has namespace like -
<application xmlns="http://ns.adobe.com/air/application/1.5"> ,
but it should be
<application xmlns="http://ns.adobe.com/air/application/2.0">
Also other options is to add -target-player=10.1.0 to your flex compiler options [additional compiler arguments]
Thanks
Arun

I just updated mavericks itunes 11.1.4 and raw camera compatibility update 5.3 and my keyboard wont work. How can i fix it?

So I updatedmy macbook pro 15in. App store had 1 update for iTunes11.1.4 and RAW camera compatability update 5.3. Minutes after it installed my keyboard quit working. Te only way it works now is by bluetooth keyboard and mouse. What can I do to fix this? Has anyone else had this issue?

So I updatedmy macbook pro 15in. App store had 1 update for iTunes11.1.4 and RAW camera compatability update 5.3. Minutes after it installed my keyboard quit working. Te only way it works now is by bluetooth keyboard and mouse. What can I do to fix this? Has anyone else had this issue?

Final Cut Pro 4.5 and Quicktime 7 compatibility issues. Error 39!

I see some people saying Quicktime 7 is not compatible with Final Cut 4.5 and some saying it is.
I upgraded to 10.3.9 and then Quicktime 7 and I started getting error 39 at this one spot in my timeline and then crashing if I tried to play just a few seconds ahead of that spot. I tried trashing the prefs but that didn't do any good. The individual files play fine outside the timeline so it isn't corrupt media. I tried rerendering the effects that are at that point but that didn't help. I tried copying the entire timeline to a new sequence and that didn't help.
The strange thing was that when I took the part of the movie that was having trouble and deleted it from the timeline it still got error 39 when just playing over the empty timeline where the media used to be! This led me to realize that the problem lay in some Quicktime audio effects I had about a second in front ot the error 39 spot. I took off the effects from that audio but it didn't help. Then I deleted that audio from the timeline and just pasted it back in from the original clip and then it finally got to working.
Now I know nothing about the software, but I thought there might be some connection between the fact that I had effects that FCP labels as "quicktime effects" on there from my days in Quicktime 6.5, then upgraded to Q7, and perhaps those old effects don't work in Q7? I don't know.
So, my immediate problem is solved but I thought this experience may be of use to someone else. And perhaps some compatibility issues can be brought to light.

I would assume the Software Update program has sufficient logic within it to detect that my friend is running Final Cut Pro 4.0 and it would therefore be disastrous to install QuickTime 7.3, thus removing QuickTime 7.3 from her list of suggested updates. Would someone at Apple please fix this?
Sorry, but Quicktime is a component for SO MANY things, not just FCP. Sorry, but the OS doesn't detect that older versions of software are on there and won't be compatible...this is where you need to have a little knowledge. And sorry, but you need to have a little knowledge. If things are working, DO NOT UPGRADE unless it has been tested and cleared. In the case of FCP 4...it has not.
Rule of thumb...if you use older software, you have to stick to older versions of the OS and components that that software relies on.
How many things were broken with Vista? So many that the HUGE community let out a cry and now XP is available again configured on machines or as a stand alone buy. And no, Vista didn't warn that certain applications wouldn't work either.
You gotta research and find out. This place here...this forum...is a FANTASTIC place to find stuff like this out.
BTW...Apple doesn't read these forums, only us users. Gotta submit feedback here:
http://www.apple.com/feedback/finalcutpro.html
Shane

When will Windows 7 and IE 8 compatability roll out?

If you look at this thread 'Xcelsius 2008 Fix Pack 3.1 (FP3.1) is now available' there is a "upcoming major Xcelsius release" mentioned but no dates or timelines. When is this going to happen and will Windows 7 compatability be part of that release? I have customers right now that want to know, if they integrate some Xelcius dashboards into our web application, will this work in Windows 7 and IE 8.
I also noticed the expiration notice on 2008 Engage Server going away. I have Xcelsius 2008 Engage (not the server version). What is the estimated life cycle on it in light of the Server version going away next year.
P.S. I am aware of the XP compatability mode in Windows 7 but I have a hard time believing SAP would consider that a permanent solution.

Hi Matt,
I understand you can't give any detailed timelines yet, as I can only assume you guys are still early in the development cycle for some of the fixes and updates required for Windows 7 and IE 8 compatibility. My problem is I have customers that want a reporting solution integrated into the web application my company provides as a product. We want to sell them on the idea of buying Xcelsius licenses and developing their own metrics reports that would seamlessly integrate with our application and we provide an API for them to do that right now. It becomes a pretty tough sell when they ask about Windows 7 and IE 8 compatibility and I can't really tell them anything definitive other then "I think SAP is working on that?". Its not like were talking about an obscure OS and browser, this is Microsoft after all and its my understanding they have a bit of a following . I would, at the very least, like to be able to confidently tell my customers that SAP is commited to making sure Xcelsius 2008 Engage (or what ever the next version name is ) will be fully compatible with Windows 7 and IE 8 and that the long term plan is the end of this year? middle of next year? some other non-ridiculous time frame so I can assure them its not a waste of time waiting for this product to be updated?
You mentioned any SWF files we create (at least it was implied) should run as long as Flash Player 9 or later is installed? Is that truly the case? The reason I ask is the Adobe web site says the Flash Player 10 is compatible with both Windows 7 and IE8. Is the only issue driving this compatability problem the version of the Flash Player installed, or are there still some pieces of Xcelsius that need to be rewritten to accomodate Windows 7 and IE8 regardless of what version of Flash Player is resident? Bottom line is what can I tell my customers to reassure them this is the correct path forward for their reporting needs?
Thanks,
Matt
Edited by: mathiasX on May 5, 2010 1:29 AM

Airport card and airport extreme compatibility

I am currently using APE with Powerbook G4...love it. I also have an older iMac SE Graphite 600mhz and want to add it to my wireless network. Is the Apple airport card w/adapter that is no longer sold by apple compatible with
my newer APE base station?? Any thoughts on whether ebay is a good source for purchase. I have used ebay several times and have not been dissapointed so far.

Yes, the a Mac equipped with an original Airport card is fully compatible with an Airport Extreme Base Station.
For what its worth, I've never been disappointed either with the dozens of items I've purchased via EBay.

Editing Pictures-Recommended graphite tablet and stylus?

What's the best graphite tablet and stylus for the MacBook Air?

What's the best graphite tablet and stylus for the MacBook Air?

Graphite ibook and D-Link DCS-930L

Hi
I'd like to connect a security camera to my graphite ibook G3, 366 MHz.
I've networked the camera to the computer.
I cannot get a video image when I access the camera's ip address, whether with JAVA or Active-X. I tried Safari and Firefox.
Is there a setting or add on I need? Is it a browser issue?
I'd rather use an older ibook that will be my stand-alone unit for the camera. I need to keep this camera separate from my network.
Below are the camera specs.
Thanks
AS
Minimum System Requirements
Wired (10/100 Fast Ethernet Network)
PC with:
1.3 GHz Processor
128MB Memory
Windows® 7, Windows Vista, and Windows® XP SP2
Internet Explorer® v6 and later
Multiple Camera Operation Requires PC with:
2.4GHz Processor
512MB Memory
32MB Video Card
Windows® 7, Windows Vista® and Windows® XP SP2
Internet Explorer® v6 or later

A Slverstone wrote:
Is there a setting or add on I need? Is it a browser issue?
It looks like more of a "computer doesn't meet minimum hardware or OS requirements" issue. The sysreqs have absolutely no mention of Mac compatibility. You can contact the camera maker to see if they have Mac support files but, as the cam wants a min 1.3 ghz processor and probably an intel one at that, I believe your iBook is much too old to work with that particular camera.
FWIW, iBooks have separate forums here:
iBook
The one you found is for Macs that predate the G3 processor and thus get little traffic. It can take a while to get and answer in this forum. Consider the iBook forum for future hardware questions--you will get more "eyes" on your question there.

Graphite 1500 and Synergy 2150 compatibility

Similar Messages

Maybe you are looking for