Grapht Title question

Hi
I am creating a report in Graph View in OBIEE 11g. I was wondering if it is possible to remove the line below the graph title?
Thanks!

Hi,
You can use a static text and format using HTML code
And place it above the Graph.
Regards
MuRam

Similar Messages

Numbering/Title Question

I have the following question regarding InDesign 9.2. I have created a numbering schema for a manual I'm developing using InDesign.
1         Chapter Heading
1.1      Section Heading
1.1.1   Section Heading
As you can see, I want my Heading 3 to have the Section numbers in boldface, but I want the title to be Normal font. I've been trying to change the style to reflect this but have, so far, been unsuccessful. Is there any way to do this? Thanks in advance!

In the numbered list setup you have the ability to assigne a character style to the number. Use a style that assigns Bold...

Simple Title question

Sorry, but as my ID indicates, I'm new here.
I was wondering about a title where two lines of text are 2 different sizes. Do you have to make a whole different title on another video track for the 2nd one, or is there a way to have both lines be the same title. I couldn't find any info on this in the help or manual..so I'm sorry if it seems basic.
Thanks.

You could use FCP's built in 'Lower 3rd' text selection from the drop down at bottom right of your Viewer window.
This allows for two lines of text (which can be different sizes) and an underneath layer...bar or solid or none.
Play around with it a bit. Bear in mind that FCP's internal text generator is a bit weak and you'll have best results by using san-serif fonts, a minimum of 20 point size and keeping the positioning of the text on even numbered lines in the 'y' center axis of the motion tab...or in the 'y' axis of the origin in the Controls tab.
That's probably the easiest and quickest way.
K

Window size/position and title question

I can't work out how to control the position of my site
within it's window, or the size of the window. I've tried all the
settings in the Publish panel. I'm trying to get the flash stage
(750 x 500) to occupy the centre of a slightly larger window (900 x
600) which opens to that exact size.
I also can't work out how to set the window title to anything
other than index.
thanks, URL below
www.jasonfisherjones.com

I have the same problem....hopefully Apple will address it soon.

Rolling title question in Pre Element 11

How do you set text positions so it scrolls from off screen to on screen, or off again etc., in Pre Element 11. In Pre 8 it was easy, cant find this option in 11

First, Dbl-click on the Title, to open it in the Titler.
Toggle ON the animation "stopwatch"
Go to Applied Effects, to the right-hand side of the Titler.
Move the CTI (Current Time Indicator) to the beginning of the Title, and adjust Motion>Position so that the Title is off-screen, either top, or bottom.
Move the CTI to the last Frame of the Title, and adjust Motion>Position so that the Title is oof-screen in the other direction.
For smoothest playback, you will probably want to Render that portion of the Timeline.
Note: with Keyframes, you can Roll in the Title from, say the bottom of the screen, pause it in the middle, then have it Roll off the top.
Good luck,
Hunt

Rolling title question

i have a rolling title--it's has a star wars crawl theme. i would like about 5 seconds inbetween my very last paragraph--- so that the words are completely off the screen before the last one comes on. If i do an entire new title screen--- it is TOO much time.... i tried to just add spacces in the first title but that didn't work either... any suggestions

Sometimes it is easier to make a static title and use Motion to animate it with keyframes.

Add People in Elements 13 (Second Question)

This is probably an issue of software stability - possibly tied in with the first and similar titled question (AdobeFan27 - 28 Sept 2014). Tried Troubleshooting face recognition issues in Organizer which didn't help.
I have a new load of PSE13 and have imported over 6,000 photos in small batches. Using the Add People button with each batch has increasingly become less and less reliable. Each time it's failed to work I have usually found a computer restart has been necessary to make it work again (although sometimes a second restart has been required). Finally today it has completely stopped working and only a reload of the software has enabled it to Add People again. At each of the failures I have tried closing down applications (like Explorer and Chrome, Outlook and other Office applications) and I could not identify any one application that might have been a cause of the problem.
The visual cue to Add People not working is..... >click on Add People >windows flash open and close - these have the appearance on "doing its thing" and then instantly closing - too fast to read anything though.
I hope this is a common bug that is coming to light because it would be a pain to have to reload PSE13 each time I cannot get Add People working.
I will add to this post IF I can identify more symptoms. I am also able to respond to Adobe Support staff with additional information if it'll help.
Machine Details
Elements Organizer 13.0.0.0
Core Version: 13.0 (20140831.m.62014)
Language Version: 13.0 (20140831.m.62014)
Current Catalog:
Catalog Name: 01 Main 1
Catalog Location: G:\All Photographs\05 Adobe Elements Catalogues\01 Catalogues\01 Main 1\
Catalog Size: 31.2MB
Catalog Cache Size: 287.8MB
System:
Operating System Name: Windows 7 (NOTE running 64 bit version of PSE13)
Operating System Version: 6.1 Service Pack 1
System Architecture:
Built-in Memory: 8GB
Free Memory: 4.6GB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: Not installed
Adobe Reader Version: Not installed
Adobe Acrobat Version: 10.1
CD and DVD drives:
D: (ATAPI iHAS624 BUS: 1 ID: 1 Firmware: B)

I have the same issues as you describe in your post.
Doing some Google searches lead me to believe that Adobe is not interested in this subject.
PSE11, 12 and 13 all seem to give the same problems.
"Add People", and "Mark Face" does nothing, and no improvement has been seen the last years.
I even tried Adobes chat, but after a few hours - mostly waiting for an inexperience person asking a new questiom I got i timeout waiting, and gave up.
Here is what I do:
1: Pressing "Add People"
2: Runs "People Recognition"
3: Displays "Analyzing Your media now"
4: Displays "No New People found in Your selection"
5: Press "Mark Face"
6: displays "People Analysis is yet to be performe on the selected media. Would you 7: like to start the analysis now? Yes No
8: Pressing Yes
9: and it is back to step 2
Upgraded from 11 to 13 at X-max. Updated to 13.1 yesterday. Win 8.1, 8G memory
(Have tried to rename breezesession.dat, and access rights seems fine. File reappears when Organizer is used.)

Question for Mike - LaCie FireWire & iDVD5

Mike - Can you help please ? John Beatty suggested I post this to you :
I have just bought a LaCie Double Layer bus-powered Firewire DVD. It is an NEC DVD+-RW ND-6550A device. The drive came with Toast 6 Titanium, which is now installed.
I also have an internal Matshita DVD reader/ CD writer as part of the original G4 setup.
When I attempt to burn a project in iDVD5.0.1, the internal drive opens up and I get a message telling me to insert a DVD, even though this is not a DVD writer. I've tried Control-clicking the Burn icon, but nothing different happens. There is no option for drive selection in the iDVD menu structure either.
I don't really want to spend ages writing Disk Images, then writing to the LaCie, and I've searched this forum for a similar issue - but 'fraid I can't find anything similar. Does anyone have any suggestions that will enable iDVD to recognise the external LaCie ?
Appreciate any advice
Paul
G4 AGP 500Mhz; Mac OS X (10.4); 768MB RAM
RE: How do I get iDVD5 to recognise my external DVD Drive ?
Don't skip this route - the amount of "extra" time is almost zero - in effect iDVD is doing this anyway behind the scenes to some degree. And separating encoding from burning makes a lot of sense. I always "Save as Disk Image" and burn separately.
And there is a guy that works for LaCie that frequent this forum:
http://discussions.info.apple.com/webx?224@@[email protected]/7
I think you just need the proper disk burning profile from LaCie. You could probably e-mail Mike at the address on his profile. Or post a new thread titled "Question for Mike - LaCie Firewire and iDVD5"
John B.

Mike
Thanks. I tried burning a disk image for a 48min video in iDVD. That worked fine when previewed. I then burnt it to DVD in Toast 6.1 using the Copy (Image File option) Tab.
The resultant DVD will not play in either my internal Drive, nor my normal DVD player - which is a multi region player. The DVD is only recognised in the external LaCie. BUT, playing the movie only shows chapter 1 of 12, and there is no sound at all. (despite the preview showing it to be ok).
As a test, I burnt the movie in iDVD5 using the Pfurz & Hurz plugins. It burnt ok, but I got the same result - chapter 1 only and no sound.
My supplier for the LaCie rive suggested I also try and export the movie from iMovie to a Quick Time compression at full DV quality to make sure that worked. It doesn't - despite a 35Gb spare capacity on the Hard Drive, I either get a complete system hang with hard restarts required, Error 36 or the occasional short clip compressing OK. I'm at a loss - the fact that I get a decent image file from iDVD indicated there's nothing wrong with the video files...
Any suggestions ??!

Question about adjusting an image to compensate for an alpha black overlay

I don't know how accurate that title/question is but please hear me out and I'l explain it as best I can.
There is a touchscreen monitor in my car.
It allows custom background wallpapers to be loaded via USB.
The touchscreen automatically adds what would appear to be about a 25% alpha black layer in FRONT of the image so the touchscreen controls and icons are clearly visible.
The problem is, I don't know what values I'm supposed to adjust on my image in order to get it to look the same way it does on my computer screen.
Would you adjust the brightness? Contrast? Tint? A combination of all of them?
Or is this simply not possible because the ~25% alpha black tint is placed OVER the wallpaper?
I'd really appreciate some advice. I don't mind tinkering with the values and using trial and error but I don't want to waste my time if this simply isn't possible.

Just so it's clear, you're not going to be able to "brighten it up" so it looks just like the original - at least not completely so. An image can only be as bright as bright white. If that has been reduced by an overlay, you're not going to be able to make the original image "brighter than white" so as to compensate. Maybe someday, when HDR image formats are common...
The car is darkening the image on purpose in order to make the locations of the controls more obvious. I can't imagine why you'd want such a busy image as a background, since it makes the actual controls difficult to find.
I read an article today that says that testing has shown that automotive touch screens distract drivers as much as a 0.08 blood alcohol level. And you're wanting to make it more difficult to find those controls.
Whatever you do, please be careful.
-Noel

I have a flashing folder on a white screen with a question mark in the folder after installing an ssd to my MacBook Pro .. Any suggestions??

Just hoping for some help from the title question. Thank you guys

You need to format the SSD and install a version of OS X on it before it will boot. There are a number of ways you can go about this.
Get an enclosure for your 'old' drive and boot from it with the SSD installed. OWC has an assortment of inexpensive enclosures. Boot from your 'old' drive and use Disk Utility to format the SSD as "Mac OS Extended (Journaled)" with a single GUID partition. Then use Carbon Copy Cloner to clone your old drive to your new. Select the SSD as your Startup Drive in System Preferences.
Alternately, you can use Lion DiskMaker to create a bootable USB flash Drive (8GB minimum) or a dual-layer DVD if you've downloaded Mountain Lion and still have the "Install OS X Mountain Lion.app" in your Applications folder. If you've already purchased ML, you can simply redownload this file again and quit the application when it finishes downloading and begins the installation.
Either method will work.
Good luck,
Clinton

Re: (forte-users) Question

This is a multi-part message in MIME format.
--------------4E6A4194374DC1BDF50CB1A1
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
I would set the completion event for the display method of the new window and
register to this event in the main window as you see in the attached .pex file.
With this solution it is possible to handle a failor in the new window in order
to bahave like the normal completion and cause the deletion of the input element
in the main window.
Best Regards,
Tamas Deak
"Zirney, Bobby" wrote:
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_001_01BEF4BD.83F24DA6
Content-Type: text/plain;
charset="iso-8859-1"
I have a frame with a button on it that will open up another frame. When I
close the second frame by pressing the X in the top right hand corner, I
want to clear all the data on the first screen. I have been trying all
sorts of things without success. Does anyone have any suggestions as to how
to do this?
------_=_NextPart_001_01BEF4BD.83F24DA6
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<DEFANGED-META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1">
<DEFANGED-META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2448.0">
<DEFANGED-TITLE>Question</TITLE>
</HEAD>
<BODY>
I have a frame with a button on it =
that will open up another frame. When I close the second frame by =
pressing the X in the top right hand corner, I want to clear all the =
data on the first screen. I have been trying all sorts of things =
without success. Does anyone have any suggestions as to how to do =
this?
</BODY>
</HTML>
------_=_NextPart_001_01BEF4BD.83F24DA6--
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]
--------------4E6A4194374DC1BDF50CB1A1
Content-Type: application/x-unknown-content-type-pex_auto_file;
name="Win.pex"
Content-Transfer-Encoding: base64
Content-Disposition: inline;
filename="Win.pex"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--------------4E6A4194374DC1BDF50CB1A1--

Bobby,
The simplest solution I think would be to use grids and map them to some business class - which I suppose you must be already using. In the event handler of the first window (button.click event) after you call the display method of the second window you can new the business class.
Kapil
From: Zirney, Bobby[SMTP:[email protected]]
Sent: Donnerstag, 2. September 1999 02:33
To: '[email protected]'
Subject: (forte-users) Question
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_001_01BEF4BD.83F24DA6
Content-Type: text/plain;
charset="iso-8859-1"
I have a frame with a button on it that will open up another frame. When I
close the second frame by pressing the X in the top right hand corner, I
want to clear all the data on the first screen. I have been trying all
sorts of things without success. Does anyone have any suggestions as to how
to do this?
------_=_NextPart_001_01BEF4BD.83F24DA6
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<DEFANGED-META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1">
<DEFANGED-META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2448.0">
<DEFANGED-TITLE>Question</TITLE>
</HEAD>
<BODY>
I have a frame with a button on it =
that will open up another frame. When I close the second frame by =
pressing the X in the top right hand corner, I want to clear all the =
data on the first screen. I have been trying all sorts of things =
without success. Does anyone have any suggestions as to how to do =
this?
</BODY>
</HTML>
------_=_NextPart_001_01BEF4BD.83F24DA6--
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

Titles and the DVD

Hi,
First time asking, but have read some answers already that have been helpful.
I can tell you don't love title questions, but I hope you'll help anyway.
I am editing in FCP4 with video from mini DV. I have titles on black in a dark(ish) gold before and after segments, as well as, identifying titles over people as they come on screen. These titles are black with a medium blue box as background for their names and a dark gold box just underneath as background for there job title.
I used Live Type for all of these, except one of the segment titles is in motion just for kicks. (don't see a difference)
To the questions: 1. I see some fuzziness on the titles on my tv (a Sony 32" wega) I use to get that from Avid's even when I dropped the opacity (though it helped), any ideas? It's worse on the identifying titles and worse the smaller the font. Most of the fonts for everything are 30 point and American typwriter condensed, I go as low as 24 point for some long job titles and use a cursive font for a few segment titles.
Question 2. When I repostion titles in Live type It seems to sometime cause a smeared effect which will carry over to FCP, but if I adjust a little up or down it will get better?
Question 3. I burn a test DVD of part of my program in DVDSP (first time), so I used the basic setting and the titles looked even worse this time on a difference TV. again any ideas?
Here are the details if you need more just let me know.
In live Title I picked the DV 3:2 seting which the tutorial recommended. that gave my the following settings Width: 720px, 9" at 80dpi (I don't get why 80dpi), Height 480px 6.67" at 72dpi, Frame rate: 29.97, Field domiance: None, Pixel Aspect 0.90, Start time: 1:02:29;05, time Format SMPTE Drop, Under Quality--Canvas: Normal, Movie: Normal, Preview: Draft, Color: Dark Gold, Show grid: unchecked, show rulers: unchecked, Grid Width 25px.
For the DVD I exproted as QT, Current settings, audio and video, chaptermakers.
My final project is going to be around two hours the part I tested was about 1/2 an hour. I am thinking I am going to need to use Compressor for the finished product, but that is a whole other subject. I've never used compressor--gulp!
I know this is a lot, any help will be greatly appreciated.

Well, first off, welcome to the forum.
First off, dv ain't great for titles-- but you can get really nice results if you're careful. Back in my avid days I always enjoyed the good titles I could get. Limited (back then) but good.
do you have a decent calibrated monitor, (not a tv?) This is really the best way to judge your work. TV's are "painted" hot and contrasty, and no two are alike. They're built that way to overcome possible terrible viewing conditions in a variety of rooms, and not the best for a uniform result every time.
To your questions:
Try to keep your luma at about 90% You'll start buzzing on some sets if you hit or go over 100% luma, especially if you have a really contrasty color for a bg. Your sizing is about what I use, depending if I'm working for a huge screen or not.
Smear? I take it you're running into interlace interference (for want of a better term.) What you're seeing is a pretty well known issue. Double click yout title to open it in the viewer and click on the motion tab. A little experimenting will show you that a title placed at even, whole numbers for vertical will look better than odd numbers or fractions.
DVD compression is a world in itself. with a show near two hours, I think you're gonna make pile of coasters in your learning curve. and don't worry about compressor. DVDSP uses the same engine-- just two different interfaces. Some like dvdsp for encoding, some like compressor better.

How do I sort ALL my bookmarks into alphabetical order with ONE CLICK?

This functionality does not - nor has ever existed in any version of Firefox. (as far as I remember)
This question has been asked multiple times - and the answer is usually incomplete or too time consuming (especially for those of us who have over THREE THOUSAND bookmarks separated in hundreds of folders)
The only decent answer - used to be - to install an addon called SortPlaces: https://addons.mozilla.org/firefox/addon/9275 - though for some reason the developer was offended by those in control of Mozilla and has pulled all of his addons from every site that is easily accessible - the newest version of firefox has broken this add on - and Firefox has a very useless sorting system. --
Sorting your bookmarks - one folder at a time - using a right click option - that only works when you 'view -toolbars-bookmarks' (or when you right click within the bookmark menu system) is a pitiful system -
Why can't you sort it when in 'bookmarks - show all bookmarks' ?? (well you CAN sort it there - but it will revert back to its un sorted form upon closing the interface)
Why can't you export it into a json - or html - then sort using a text editor - or some other program - then re import?
With the promotion of your online bookmark sync system you would think that something as simple as SORTING would have been covered...
Other topics comparable - with answers that are not valid:
1 https://support.mozilla.org/en-US/questions/760184
cor-el suggested right clicking each folder individually - or using the sourtplaces addon (which is no longer available)
2 https://support.mozilla.org/en-US/questions/837928?as=aaq
various people suggest using the sort places add on.
3 https://support.mozilla.org/en-US/questions/752997?as=aaq
SortPlaces is mentioned again - along with a link that looks REALLY OFFICIAL - and that link also suggests using the SortPlaces - the link says its not available at mozilla but can be found elsewhere -- but the latest firefox has broken it - so its useless now...
the-edmeister suggested:
http://kb.mozillazine.org/Sorting_bookmarks_alphabetically
Not sure what happened with the developer of Sortspaces - I never used any of his addons or had any dealings with him - but he is certainly unhappy with the folks behind Firefox.
http://www.andyhalford.com/
and HOORAY for Bookmark Duplicate Detector 1.1.1 https://addons.mozilla.org/en-US/firefox/addon/bookmark-duplicate-detector/?src=search (helped me get rid of over 700 duplicate bookmarks - got me down to 3400 total; the auto remove all does not work with firefox14 but the rest of it works fine- I just had to manually push delete over and over again for a few hours...)
- and the checkCompatibility 1.3 that allows me to load out of date add ons: https://addons.mozilla.org/en-US/firefox/addon/checkcompatibility/
The CheckCompatibility allowed me to install the Sort Bookmarks add on - and it looks perfect - but will not properly function...
I hope my post helps others who are trying to sort their bookmarks - and I hope someone has an answer for some of my questions - preferably the title question... lol

I've been watching this (general) thread for years and waiting patiently for Mozilla to address it, w/out any success at all - obviously. And, no, the answers are NOT helpful to me!
I understand many people have no interest in bookmarks but clearly lots of people still use them. If you're going to have the feature that purports to sort bookmarks, for pete's sake, make it work. I'd think it would be an embarrassment to have a part of your program malfunction for so long. I mean, what are you folks? IE!?! Why don't you just ask someone to spend a couple days addressing the issue and get it straightened out? (Clearly i care enough about it but I don't code, so… I'm useless.)
For the record, a user shouldn't have to individually sort each folder within their Bookmarks folder. One should be able to pick an option that would apply to all folders. Sure, leave the ability to sort individually but add an "apply to all" feature to the mother folder. Then, find a way to have it automatically maintain that status, whatever is selected. Doesn't sound like that difficult a task, given all the other great things you guys and girls do all the time! That's my ¢.
By the way, I'm using a MB Pro 4,1 (early 2008), OS 10.6.8, and Firefox 19.0 beta. Thanks for listening to my bitching.
- cheers

How do I use the event.target.name String with an external dispatchEvent?

...I hope the title question makes sense...
On my stage I have an externally loaded SWF with a button. When clicked the button dispatches an event to the main stage.
On the main stage a listener then loads an SWF into a loader called gallery.
The gallery loader is also being shared by buttons on the main stage which use the event.target.name String to call in SWFs with corresponding names.
I am using Tweens to fade-out and -in content to the gallery when a button is pressed.
Loading the SWFs was working until I tried to create a universal button function for the dispatchEvent buttons...
The problem I have is that I don't know how to define the String to tell the newSWFRequest where to find the SWF when triggered by the external buttons.
(I may be doing this all wrong... but figured the best way to load an SWF on to the main stage from an external SWF was by using dispatchEvent??)
My code triggers the Event and the gallery loader fades out, but then it cannot find the new SWF:
Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
Please can someone help me understand the way to make the String point in the right direction? (I think the only errors are in bold below)
Code:
var myTweenIn2:Tween;
var myTweenOut2:Tween;
var nextLoadS2:String;
// Listen for external event dispatched from external btns
addEventListener("contactStage", btnClickExtrnl);
function btnClickExtrnl(e:Event):void {
nextLoadS2 = ?????
myTweenOut2=new Tween(gallery,"alpha",None.easeOut,gallery.alpha,0,0.2,true);
myTweenOut2.addEventListener(TweenEvent.MOTION_FINISH,tweenOutCompleteF2);
// Btns Universal function
function tweenOutCompleteF2(e:TweenEvent){
myTweenOut2.removeEventListener(TweenEvent.MOTION_FINISH,tweenOutCompleteF2);
myTweenOut2=null;
    var newSWFRequest:URLRequest = new URLRequest("swfs/" + nextLoadS2 + ".swf");
myTweenIn2 = new Tween(gallery, "alpha", None.easeOut, gallery.alpha, 1, 0.2, true);
    gallery.load(newSWFRequest);
    gallery.x = Xpos;
    gallery.y = Ypos;
Thank you.

That works – thank you!
I'm now using this code to fade in each of the SWFs:
function contactStage(e:MouseEvent):void {
    var newSWFRequest:URLRequest = new URLRequest("swfs/"+e.currentTarget.name+".swf");
    myTweenIn = new Tween(gallery, "alpha", None.easeOut, 0, 1, 0.2, true);
    gallery.load(newSWFRequest);
    gallery.x = Xpos;
    gallery.y = Ypos;
But I cannot add the fade out function. I have amended the above code to create:
var myTweenOutX:Tween;
var myTweenInX:Tween;
function contactStage(e:MouseEvent):void {
myTweenOutX=new Tween(gallery,"alpha",None.easeOut,gallery.alpha,0,0.2,true);
myTweenOutX.addEventListener(TweenEvent.MOTION_FINISH,tweenOutCompleteFX);
function tweenOutCompleteFX(e:TweenEvent){
myTweenOutX.removeEventListener(TweenEvent.MOTION_FINISH,tweenOutCompleteFX);
myTweenOutX=null;
    var newSWFRequest:URLRequest = new URLRequest("swfs/"+e.currentTarget.name+".swf");
myTweenInX = new Tween(gallery, "alpha", None.easeOut, 0, 1, 0.2, true);
    gallery.load(newSWFRequest);
    gallery.x = Xpos;
    gallery.y = Ypos;
But get this error:
ReferenceError: Error #1069: Property name not found on fl.transitions.Tween and there is no default value.
at ACOUSTIC_fla::MainTimeline/tweenOutCompleteFX()[ACOUSTIC_fla.MainTimeline::frame1:110]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at fl.transitions::Tween/set time()
at fl.transitions::Tween/nextFrame()
at fl.transitions::Tween/onEnterFrame()
Where am I going wrong?

POPUP TO GET VALUE

Hi, I need to show a popup that lets write a value.
I've tried POPUP_GET_VALUES function, but I need to write the text to show, not the description of the field. With POPUP_GET_VALUES I inform a field from a table and when the popup appears, it shows the description of the field. I need a popup where I can write the description and retrieve the data entered.
For example, I'd like to show a popup with the question: What's your name? and a textbox where the user can write the answer, does it exist?
Thanks!
Carles

Or, how about this, although it is not very elegant.
data: value type spop-varvalue1.
call function 'POPUP_TO_FETCH_ONE_VALUE'
exporting
    textline1            = 'What is your name?'
*   TEXTLINE2            = 'Can you tell me please?'
*   TEXTLINE3            = ' '
    title                = 'Question'
    valuelength          = '30'
importing
*   ANSWER               =
    value1               = value
exceptions
   titel_too_long       = 1
   others               = 2.
Regards,
Rich Heilman

Grapht Title question

Similar Messages

Maybe you are looking for