Gray area between vertical ruler and edge of page – remove

I have a pages file where there is a large gray area between the edge of the page and the vertical ruler. I don't know where it came from but I want to get rid of it. I have a new file that I just opened from my templates and he does not have this large gray area.
I tried looking, clicking on things and scratching my head and nothing works.
I tried to add a couple J pigs to show what I'm talking about but can't do it. Anyway any suggestions would be highly appreciated.
TIA
David

I'm not sure what you're seeing.
Check the documents printer settings. They may be set for different printers. Perhaps Any Printer. If they'e not set for your printer, change them and see what you get.
Walt

Similar Messages

Difference between impelementation rules and business logc.

Hi all,
Please tell me what is the exact difference between implementation rules and business logic?And more importantly when and where they should be used?
Thanks in advance.
Regards,
Jayant Gupta

Hi vasu,
from the point of view of possible transformation there are not differences.
The great difference is the following:
In Update Rules routines are defined for a single field for every key filed: for example you define the single routine for 0AMOUNT for every single Characteristic that define the key (0COSTCENTER - 0COSTELEMENT - ...). For every single DataField you can define a different routine also in terms of Key fields.
In transfer roules every routine is for every field without any kind of relation to the other fields.
Check also this doc:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975</a>
Ciao.
Riccardo.
Message was edited by: Riccardo Venturini

What is the Relationship between Update Rule and Infopackage/Transfer Rules

Hello Experts,
can you help explain these scenarios to me:
What is the relationship between update rules and infopackges?
What is the relationship between transfer rules and infopackges?
What is the relationship between update rules and transfer rules?

Hello,
Info-packages trigger the data load into BW system from the source system. An info-package is created for a specific data source and info source combination.
1) When you trigger the info-package it sends an request to the source system to start the extraction process and this corresponds to the step "Data Request Received" in monitor under details tab. It is the first step.
2) Then the selections specified in the info-package are transferred to the source system to select the requested data from BW system. Then it is sent back to BW system.
3) Once it reach BW, it gets into the PSA and then it gets updated into the data target (depends on what settings are made in IP). No rules (Transfer rules / update rules) comes into picture when data is stored in PSA. Only the transfer structure is used to map the BW info-objects with the source system fields.
4) After data is stored into PSA, the update into the data targets begins. First the transfer rules are applied -> data then flows through the communication structure -> update rules are applied and finally the records gets updated into the data target.
The extraction flow is: -
Source System (DS) -> PSA -> Transfer Rules -> Communication Structure -> Update Rules -> Data target.
Info-package actually triggers the whole data flow in BW system.
Hope it gives you a clear picture.
Thx,
Soumya

How to find what are all the rules and events are monitoring for specific server in SCOM 2007

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.
Thanks for the question Sandoss. This is something that we all come across at sometime.
Thanks & regards, Sumit Agrawal
The lack of this feature is an inexcusable oversight for an enterprise management product. They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down.
BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server.
The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well. I'd like some feedback if something is missing.
DECLARE @srv varchar(30)
SET @srv = 'your name here'
SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
case
    when s.HealthState = 1 then 'healthy'
    when s.HealthState = 2 then 'Warning'
    when s.HealthState = 3 then 'Critical'
    else 'N/A'
end as Health
FROM state AS s WITH (NOLOCK)
left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
where
bme.FullName like '%' + @srv + '%'
and s.HealthState <> 0
and mon.IsInternalRollupMonitor = 0
and mon.IsExternalRollupMonitor = 0
order by bme.DisplayName, mon.displayName

Charts: Gap between Vertical Axis and the chart area

Friends,
I have a really wierd issue and I am sure I am doing
something wrong.
I am trying to align 2 charts that are placed vertically. I
want to align the left vertical axis and the gridlines within them.
Aligning the left vertical axis is easy and done but aligning the
grids is becoming challenging and I have already spent a few hours
on this problem.
Here is a wrong chart image ...
Wrong
chart image
The line of the LineChart (in the top chart) is touching the
left and right edges where as the bottom chart bars do not touch
the left/right edges. Due to this the gridlines are not aligned.
I had managed to solve this problem but I am not sure what
part of the code solved the problem. Here is the right chart image:
Right
chart image
In this chart, the line of the linechart (in the top chart)
is not touching the left and right boundary hence the gridlines are
alignd with each other.
I wonder what property of the chart controls the series
touching the left/right vertical axis or boundary. Your help is
appreciated.
Thanks

here is some more information ...
I started changing some of the properties of the chart which
I mentioned is a RIGHT CHART and this is what I learnt ...
It was a CartesianChart hence it was creating the gap
between the left/right vertical axis and the actual chart area
(refer to the right chart image).
I changed it to a LineChart and it started behaving like the
chart in the WRONG CHART image.
Is there a solution to this problem?

Vertical Ruler and Preprinted Forms

I am creating a Bill of Lading in CR2008 which must be printed on a preprinted form on a dot matrix printer.
There are boxes which have to have information in them. I can measure on the form from the top and left where the data needs to go, but when looking at Crystal, it is hard to tell how the vertical ruler works.
In the Report Header, I have a 1 showing, then there is another 1 in the Page Header, another 1 in the Details.
How can you accurately measure from the top edge of the page down using the vertical ruler? Am I making this too complicated?
Thanks,
Gilley Estes
Welton USA

Pretty much what he said. I just did an invoice and packlist on dot matrix printer with pre-printed forms. You have to determine whether the printer is doing 8 lpi or 6 lpi and 10, 12 or 15 cpi. Adjusting all of your sections to be a multiple of .125" or .167" will let you back in to the vertical positioning. Make sure you use a mono spaced font available on the printer (usually Courier New) and font size 8 for 15cpi, 10 for 12 cpi or 12 for 10 cpi. You can then figure your horizontal positions based on that.
It will take some tweaking after you layout your first pass.

Difference between aggregation rule and column formula in edit formula

Anybody please help what is the use of aggregation rule and column formula in edit column option.
What is the difference if I apply sum in aggregation rule with apply sum(column name) in column formula.
When do I need use which one.
Thanks in advance

When you build a column in the rpd, you have the option of determining if the column should be aggregated in some way or not. For dimension columns, you wouldn't put aggregation. For say, an accoun ledger balance column, you might put the aggregation SUM or AVERAGE. Whatever aggregation you put on this column will be the "default" aggregation of the column in Answers.
So in Answerrs, if you use the Account Ledger Balance column and you only have Region as the dimension, OBIEE will aggregate or SUM the ledger balances so you have a SUM for the region level. If you had district, than the ledger balance column will aggregate to the district level. This is a convenient way to build reports without having to specify what the aggregation should be.
However, OBIEE gives you the ability to override what the default aggregation is for a particular column. This is the purpose of the drop down in the bottom left of a column when you click the fx button.
Say the default aggregation of ledger balance is SUM in the rpd, but for the report you are building, you want the average, you can apply the AVERAGE function in the fx window and it will overridge the SUM aggregation rule that was in the rpd.
Got it?

I having trouble with a scrolling page......where i have a video. the pages between the video and the previous page jumps and show a gap between the pages.....i'm not sure if it is the spped or what?

I keep getting a gap between scrolling pages of a video and a regular page. Not sure why. I keep adjusting the speed, but still I get a gap in the pages as it scrolls. Thanks.

Hello cor-el, I apologize for not letting you know if your suggestions about my question worked or not. I came down with pneumonia and then caught the flu on top of that. Today I tried what you had suggested about disabling the hardware acceleration and it didn't make any difference. You had also gave me a link to he article about plug-ins and when I clicked on the list of the current plug-ins I have the following is what came up:
Fox-it Reader Plug-In for Mozilla, 2.2.3.703
Microsoft DRM 9.0.0.3250
(drm netscape network object)
Microsoft DRM 9.0.0.3250
(drm store netscape plug in)
Shockwave Flash 12.0.0.43
Windows Media Player Plug In Dynamic Link Library 3.0.2.628
(np dsplay d11)
Windows Presentation Foundation 3.5.30729.1
When I then clicked to see if there were updates available, the only one that it said was updated was the Shockwave Flash. The Windows Media Plug In Dynamic Link Library, said the status was vulnerable and the other three said the status was unknown. Does any of this make sense to you and are there things that should be on the plug in list that aren't? I apologize for the length of my post but I wanted to give you as much information as possible. Thanks for your help

What are these shared computers and how do I remove them from Finder?

I have four Macs on my closed, hidden wifi network. Two iMacs and Two macbooks. For some reason, two unknown computers are showing up on the network, but only on two out of the four macs, one imac and one macbook, incedentally the two units with built in SD card readers. They are: hp0025b3e8a8ca and hp3c4a921329ca. I'll post a screen shot. They both have one folder called MEMORY_CARD and I can't open it. I've double checked, I don't have SMB sharing enabled on any of my macs. They have the little icon associated with a windows machine. Any idea what these are and how I can remove them from finder? is someone else on my network?

How are u connected, as in ISP, University Network, etc.? I get shares like that too, as my ISP here in Nepal is using some crazy way of sharing connections with customers. I called and asked them once, but they have not clue about Macs. I suspect it's a technician doing some work in the office, who is tapped into the same C1 connection that I am using, but it is a bit disconcerting to see computers you don't know on your Network.
When I teach in Thailand, I am on a university system that will show all the users connected to the same hotspot. That's why I lock down my sharing when there. It's kinda crazy, as I don't really understand all the security settings and what they imply. It would be nice if there were a guide for home/small business Lans on what exactly the settings should be in OSX, but I suppose it's all out there in Google, somewhere...

What is the difference between sourcing rule and Bill of distribution

Hi All,
Can anybody explain me the difference between the Bill of distribution and sourcing rule. In what scenario a bill of distribution will be used.
thank in advance for your clarification.
thanks.
babu

Hi Babu
While these 2 entities overlap each other significantly and may be used as a replacement of other at times, there are still a few basic differences outlined below:
1. Sourcing Rules (SR) specify how an item (or group of items) are sourced for replenishment by an entity (say customer/ organization etc). Please note that its expressed in terms of receiving entity.
2. Bill of Distribution (BOD) specify how an item is supplied by an entity (say organization). This is expressed in terms of supplying entity
3. While BOD can only be assigned to internal organizations (could be CM or suppliers if modelled as an organization), Souricng Rule can be assigned to any type of entity including customers, suppliers, organizations and even regions & zones.
4. Typically usage of BOD vs. SR may be dependent on you supply chain structure. If a make organization is supplying to multiple distribution centers etc, BOD may help reduce data setup volume. Instead if a distribution center is sourcing from multiple organizations, SR may be a better choice.
5. If you're using regions & zones or customer locations to model how ATP/ ASCP selects a ship-from organization for Sales Orders, SR is only supported mechanism (unless these customers are modelled as organization)
6. For suppliers (not modelled as Org), SR is only option.
Hope this is helpful and please note BOD & SR aren't multually exclusive and can be used in combination at different levels of your supply chain.
Please let me know if I may help any further.
Thanks
Navneet Goel
http://www.inspirage.com
NOTE: I suppose same question was asked by you in another thread, not sure if you intended to update same thread or re-query for same question.

What's the difference between "More Everything" and "EDGE"?

I don't understand what's different between my current family plan and the EDGE plan. I pay ~ $240 for my current plan and the Verizon site seems to be saying that EDGE would be $160. What would I be giving up if I switch? Thanks for your help!

EEdge is an interest free payment plan for a new phone. if you purchase a phone on the edge plan you get a 15 or 25( if you have 10gb plan or larger)dollar discount off your$40 line fee On your more everything plan. But you still have the phone payment, which is around $25 For most phones.

Wat is the diff. between at first and top of page

pls let me know

<b>AT - itab </b>
Syntax
LOOP AT itab result ...
[AT FIRST.
   ENDAT.]
    [AT NEW comp1.
     ENDAT.
       [AT NEW comp2.
       ENDAT.
       AT END OF comp2.
       ENDAT.]
     AT END OF comp1.
     ENDAT.]
[AT LAST.
ENDAT.]
ENDLOOP.
Extras:
1. ... FIRST
2. ... |{END OF} comp
3. ... LAST
Effect
The statement block of a LOOP loop can contain control structures for control level processing. The respective control statement is AT. The statements AT and ENDAT define statement blocks that are executed at control breaks. Within these statement blocks, the statement SUM can be specified to total numeric components of a group level. In the case of output behavior result, the same applies as for LOOP AT.
So that group level processing can be executed correctly, the following rules should be noted:
After LOOP there should be no limiting condition cond specified.
The internal table must not be modified within the LOOP loop.
The work area wa specified in the LOOP statement after the INTO addition must be compatible with the line type of the table.
The content of a work area wa specified in the LOOP statement after the INTO addition must not be modified.
The prerequisite for control level processing is that the internal table is sorted in exactly the same sequence as the component of its line type - that is, first in accordance with the first component, then in accordance with the second component, and so on. The line structure and the corresponding sorting sequence gives a group structure of the content of the internal table, whose levels can be evaluated using AT statements. The AT-ENDAT control structures must be aligned one after the other, in accordance with the group structure.
The statement blocks within the AT-ENDAT control structures are listed if an appropriate control break is made in the current table line. Statements in the LOOP-ENDLOOP control structure that are not executed within an AT-ENDAT control structure are executed each time the loop is run through.
If the INTO addition is used in the LOOP statement to assign the content of the current line to a work area wa, its content is changed upon entry into the AT-ENDAT control structure as follows:
The components of the current group key will remain unchanged.
All components with a character-type, flat data type to the right of the current group key are set to character "*" at that position.
All the other components to the right of the current group key are set to their initial value.
When the AT-ENDAT control structure is exited, the content of the current table line is assigned to the entire work area wa.
Note
If the INTO addition is used in the LOOP statement, a field symbol can be specified outside of the classes after AT |{END OF}. The appropriate component of the work area wa is assigned to this field symbol.
Addition 1
... FIRST
Effect
First line of the internal table.
Addition 2
... |{END OF} comp
Effect
Beginning or end of a group of lines with the same content in the component comp1 comp2 ... and in the components to the left of comp1 comp2 .... The components comp1 comp2 ... can be specified, as described in the section Specification of Components, with the limitation that access to object attributes is not possible here.
Addition 3
... LAST
Effect
The last line of the internal table.
<b>TOP-OF-PAGE </b>
Syntax
TOP-OF-PAGE [DURING LINE-SELECTION].
Addition:
... DURING LINE-SELECTION
Effect
This statement defines an event block whose event is triggered by the ABAP runtime environment during the creation of a list. This occurs when a new page is started - that is, immediately before the first line in a new page is to be output. All list outputs that take place in the event block are placed below the standard page header of the list. You cannot output more lines than are available in the page within the event block. The NEW-PAGE statement is ignored within this event block.
The entire output written to the list in the event block belongs to the page header of the current list page. The top page header cannot be moved when you scroll vertically in a list displayed on the screen.
Addition
... DURING LINE-SELECTION
Effect
If you do not use an addition, an event block is triggered for event TOP-OF-PAGE during the creation of a basic list. If you use the addition DURING LINE-SELECTION, an event block is triggered for the corresponding events during the creation of details lists. You have to use system fields like sy-lsind to distinguish between the individual details lists.
Regards,
Pavan

White screen pop-up between end jump and main splash page

hi! so i'm having a problem.. there is a white screen that pops up between the last play end jump and the main dvd splash page.. any one know how to get rid of that? there is no white frame at the tail end of my video file, i already checked for that...

Was this with a burned DVD, or at least a built Video_TS folder in DVD Player? Simulate can sometimes show visual glitches that are not really there.

Some bookmarks have "grown" a suffix of 3 characters âЄ . The bookmarks still work. What are these nutty suffixes and how do I remove them? Many have been "infected"?

These suffixes are unwanted and have infected all my browsers Firefox and IE9. Some bookmarks are unaffected. This also happened on my previous PC running Windows Vista and IE8. I edited all the affected bookmarks to remove the suffixes, but now they're back.

Upgrade your browser to Firefox ab and check
* getfirefox.com

Bidirectional communication between Shockwave Player and embedding web page

Can the 3D content in a Shockwave Player object be
manipulated by JavaScript from its embedding web page somehow ?
That is can the Shockwave Lingo/JavaScript capabilities be
leveraged from OUTSIDE the Shockwave movie ? And can the Shockwave
movie call arbitrary JavaScript functions which are defined in its
embedding web page ?

Check out
http://dasdeck.de/staff/valentin/lingo/dir_js/

Gray area between vertical ruler and edge of page – remove

Similar Messages

Maybe you are looking for