Gray/Black Screen + Cursor After Automatic OS Update
My Macbook (Pro - 2011) recently conducted an automatic update of the OS Software. Mountain Lion was previously installed on the system. I am now encountering a problem where the boot menu cycles through its normal startup, but gets stuck in a gray/black screen where the only thing that I can view is my cursor.
I read that this is a common issue with the new OS download. Presumably, I am at the account login screen although I cannot see it. I have already tried the following steps, to no avail:
1) Press power button to power down
2) Press power button to restart computer
3) Hold down left Shift key until progress bar appears
4) When at the gray/black screen with the cursor, type the first letter of your username, hit tab, type password, hit enter.
Next the beachball should appear and the download of the new OS should finish and the regular computer settings should be restored. However, I have followed these instructions exactly, about 10 times, and I can only get my spinning beachball to appear for about 5 seconds before the screen reverts to gray + cursor and nothing else happens (ie. continued download of OS, new screens, etc...).
I have tried both a wired and wireless connection as well as a USB connected keyboard. None of these other factors work. I assume that my password is accurately typed into the right login username (hence the appearance of the beachball), but am not sure what other measures I can take to allow the OS download to continue, or at least restore my former account.
Any and all help is greatly appreciated.
Hi JAl17,
If you are having an issue with starting your MacBook Pro to a gray screen, I would suggest that you troubleshoot using the steps in this article -
Mac OS X: Gray screen appears during startup - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L
Similar Messages
-
IMac has black screen/beeps after attempt to update Keyboard - no restart
I attempted to follow the instructions.... got a restart screen with a uploading box.... I accidently stopped holding the ON button down... and now I only have a black screen with beeps... help, please
EllenSears wrote:
I attempted to follow the instructions.... got a restart screen with a uploading box.... I accidently stopped holding the ON button down... and now I only have a black screen with beeps... help, please
Welcome to the Apple boards:
Were you holding down the Power button while the computer was still running? That's wrong and if that's what you did, you aborted the update and forced the machine off.
See if you can reboot in the safe mode - hold down the shift key while booting.
If you have corrupted the keyboard firmware, you may need to take the computer to Apple - I hope that is not the case.
One should never interrupt a firmware update. -
MBP restarting after sometime automatically,initially shows black screen then restarts automatically?
this is happening all of sudden now?Interval Since Last Panic Report: 5 sec
Panics Since Last Report: 1
Anonymous UUID:
Sat Apr 6 03:00:26 2013
panic(cpu 2 caller 0xffffff7f84f957f2): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff8080fc1000 0x0a5480a2, D0, P3/4
Backtrace (CPU 2), Frame : Return Address
0xffffff8080bbaf80 : 0xffffff800481d626
0xffffff8080bbaff0 : 0xffffff7f84f957f2
0xffffff8080bbb0b0 : 0xffffff7f850923b9
0xffffff8080bbb110 : 0xffffff7f8509242e
0xffffff8080bbb180 : 0xffffff7f853b8c82
0xffffff8080bbb2b0 : 0xffffff7f850b8fe8
0xffffff8080bbb2f0 : 0xffffff7f84f9d567
0xffffff8080bbb3a0 : 0xffffff7f84f9b05a
0xffffff8080bbb5a0 : 0xffffff7f84f9c983
0xffffff8080bbb670 : 0xffffff7f8601a790
0xffffff8080bbb730 : 0xffffff7f86045f98
0xffffff8080bbb7b0 : 0xffffff7f8602d308
0xffffff8080bbb810 : 0xffffff7f8602dbe9
0xffffff8080bbb860 : 0xffffff7f8602e09b
0xffffff8080bbb8d0 : 0xffffff7f8602e8d1
0xffffff8080bbb910 : 0xffffff7f85ffa34f
0xffffff8080bbba90 : 0xffffff7f8602ae39
0xffffff8080bbbb50 : 0xffffff7f85ff8de8
0xffffff8080bbbba0 : 0xffffff8004c650c9
0xffffff8080bbbbc0 : 0xffffff8004c66670
0xffffff8080bbbc20 : 0xffffff8004c6408f
0xffffff8080bbbd70 : 0xffffff80048984a1
0xffffff8080bbbe80 : 0xffffff8004820aed
0xffffff8080bbbeb0 : 0xffffff8004810448
0xffffff8080bbbf00 : 0xffffff800481961b
0xffffff8080bbbf70 : 0xffffff80048a5dd6
0xffffff8080bbbfb0 : 0xffffff80048cdd43
Kernel Extensions in backtrace:
com.apple.NVDAResman(8.1)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f84f38 000->0xffffff7f85245fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f84ea3000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f84f24000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f84ee1000
com.apple.nvidia.nv50hal(8.1)[5F021999-8B18-3BD5-9B98-90617E638A63]@0xffffff7f8 5253000->0xffffff7f85574fff
dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f84f 38000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f84ea3000
com.apple.GeForce(8.1)[A15BB65E-3501-340F-87CB-2FD2BAD33E35]@0xffffff7f85fe7000 ->0xffffff7f860b3fff
dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f84f 38000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f84f24000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f84ea3000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f84ee1000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide: 0x0000000004600000
Kernel text base: 0xffffff8004800000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 2850698695318
last loaded kext at 22285094662: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f86293000, size 32768)
last unloaded kext at 230795989184: com.apple.driver.AppleUSBUHCI 5.2.5 (addr 0xffffff7f8582e000, size 65536)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.12.87
com.apple.iokit.IOBluetoothSerialManager 4.1.3f3
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.7fc4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleIntelHDGraphics 8.1.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.3f3
com.apple.GeForce 8.1.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMikeyDriver 2.3.7fc4
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.driver.ApplePolicyControl 3.3.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIntelHDGraphicsFB 8.1.0
com.apple.driver.AppleLPC 1.6.0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMuxControl 3.3.0
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.SMCMotionSensor 3.0.3d1
com.apple.driver.AppleUSBTCButtons 237.1
com.apple.driver.AppleUSBCardReader 3.1.7
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBTCKeyboard 237.1
com.apple.iokit.SCSITaskUserClient 3.5.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AirPort.Brcm4331 614.20.16
com.apple.driver.AppleAHCIPort 2.5.1
com.apple.driver.AppleUSBHub 5.5.5
com.apple.iokit.AppleBCM5701Ethernet 3.6.0b1
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.3.7fc4
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOBluetoothFamily 4.1.3f3
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.3f3
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.nvidia.nv50hal 8.1.0
com.apple.NVDAResman 8.1.0
com.apple.driver.AppleHDAController 2.3.7fc4
com.apple.iokit.IOHDAFamily 2.3.7fc4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.driver.IOPlatformPluginFamily 5.3.0d51
com.apple.kext.triggers 1.0
com.apple.driver.AppleGraphicsControl 3.3.0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.driver.AppleSMC 3.1.4d2
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.5
com.apple.iokit.IOUSBMassStorageClass 3.5.1
com.apple.driver.AppleUSBMultitouch 237.3
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.5.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.5
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 522.4
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IOUSBUserClient 5.5.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.5.5
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.2
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.53 GHz, 4 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9500325ASG, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 5
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 7
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3 -
My iMac will not boot up. It's stuck in the black screen right after the apple logo. I ow
I Own a brand new iMac 5k with retina display. It gets stuck in the black screen right after the apple logo And all of a sudden shuts down.
You can return a new Mac within 14 days of purchase.
A new Mac is in warranty for 1 year from the date of purchase.
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare or take it to the Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
Start up in Safe Mode. http://support.apple.com/en-us/HT1564
Best. -
I opened my MacBook Pro to a dark gray/black screen. Rebooted several times with no success. Pressed the "sunrise" key several times with no success. Any suggestions to fix this?
Do you have AppleCare? Even if you don't, take to the Apple store and tell them what happened. They should help even though it's a few months out of warranty. You might have to talk to a manager or different higher up.
-
After pacman -Syu upgrade xfce boots black screen cursor
Hello,
I've recently upgraded the system with pacman -Syu and it seem something has gone wrong with new xfce 4.12. I have changed DM from slim to lxdm and can only boot to openbox but not xfce. I also switch to tty2 and try a startx with ~/.xinitrc file with exec startxfce4 but it does not launch properly. What I mean is both the display manager and a startx boots me into a black screen with a cursor when i try to launch xfce. Again I can boot to openbox just fine. I've searched for similar topics but cant seem to find any solution. Can anyone help?
[ 18.673]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 18.673] X Protocol Version 11, Revision 0
[ 18.673] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 18.673] Current Operating System: Linux arch-server 3.14.35-1-lts #1 SMP Sat Mar 7 19:24:12 CET 2015 x86_64
[ 18.674] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
[ 18.674] Build Date: 14 March 2015 06:45:50PM
[ 18.674]
[ 18.674] Current version of pixman: 0.32.6
[ 18.674] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 18.674] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.674] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 17 03:38:39 2015
[ 18.937] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 19.047] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 19.553] (==) No Layout section. Using the first Screen section.
[ 19.553] (**) |-->Screen "Default Screen" (0)
[ 19.553] (**) | |-->Monitor "<default monitor>"
[ 19.586] (==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
[ 19.586] (==) Automatically adding devices
[ 19.586] (==) Automatically enabling devices
[ 19.586] (==) Automatically adding GPU devices
[ 20.294] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 20.294] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 20.294] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.354] (II) Loader magic: 0x815d80
[ 20.354] (II) Module ABI versions:
[ 20.354] X.Org ANSI C Emulation: 0.4
[ 20.354] X.Org Video Driver: 19.0
[ 20.354] X.Org XInput driver : 21.0
[ 20.354] X.Org Server Extension : 9.0
[ 20.356] (EE) systemd-logind: failed to get session: PID 940 does not belong to any known session
[ 20.357] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 20.359] (--) PCI:*(0:1:5:0) 1002:9616:1462:7641 rev 0, Mem @ 0xd0000000/268435456, 0xfebe0000/65536, 0xfea00000/1048576, I/O @ 0x0000d000/256
[ 20.359] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 20.422] (II) "glx" will be loaded by default.
[ 20.423] (II) LoadModule: "vnc"
[ 20.568] (II) Loading /usr/lib/xorg/modules/extensions/libvnc.so
[ 22.029] (II) Module vnc: vendor="Constantin Kaplinsky"
[ 22.029] compiled for 1.17.1, module version = 1.0.0
[ 22.029] Module class: X.Org Server Extension
[ 22.029] ABI class: X.Org Server Extension, version 9.0
[ 22.029] (II) LoadModule: "glx"
[ 22.030] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.054] (II) Module glx: vendor="X.Org Foundation"
[ 24.208] compiled for 1.17.1, module version = 1.0.0
[ 24.208] ABI class: X.Org Server Extension, version 9.0
[ 24.208] (==) AIGLX enabled
[ 24.208] (==) Matched ati as autoconfigured driver 0
[ 24.208] (==) Matched ati as autoconfigured driver 1
[ 24.208] (==) Matched modesetting as autoconfigured driver 2
[ 24.208] (==) Matched fbdev as autoconfigured driver 3
[ 24.208] (==) Matched vesa as autoconfigured driver 4
[ 24.208] (==) Assigned the driver to the xf86ConfigLayout
[ 24.208] (II) LoadModule: "ati"
[ 24.261] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 24.332] (II) Module ati: vendor="X.Org Foundation"
[ 24.332] compiled for 1.17.0, module version = 7.5.0
[ 24.332] Module class: X.Org Video Driver
[ 24.332] ABI class: X.Org Video Driver, version 19.0
[ 24.332] (II) LoadModule: "radeon"
[ 24.333] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 24.765] (II) Module radeon: vendor="X.Org Foundation"
[ 24.765] compiled for 1.17.0, module version = 7.5.0
[ 24.765] Module class: X.Org Video Driver
[ 24.765] ABI class: X.Org Video Driver, version 19.0
[ 24.765] (II) LoadModule: "modesetting"
[ 24.765] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 24.878] (II) Module modesetting: vendor="X.Org Foundation"
[ 24.878] compiled for 1.17.1, module version = 1.17.1
[ 24.878] Module class: X.Org Video Driver
[ 24.878] ABI class: X.Org Video Driver, version 19.0
[ 24.878] (II) LoadModule: "fbdev"
[ 24.878] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 25.005] (II) Module fbdev: vendor="X.Org Foundation"
[ 25.005] compiled for 1.17.0, module version = 0.4.4
[ 25.005] Module class: X.Org Video Driver
[ 25.005] ABI class: X.Org Video Driver, version 19.0
[ 25.005] (II) LoadModule: "vesa"
[ 25.006] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 25.099] (II) Module vesa: vendor="X.Org Foundation"
[ 25.099] compiled for 1.17.0, module version = 2.3.2
[ 25.099] Module class: X.Org Video Driver
[ 25.099] ABI class: X.Org Video Driver, version 19.0
[ 25.099] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
[ 25.111] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 25.111] (II) FBDEV: driver for framebuffer: fbdev
[ 25.111] (II) VESA: driver for VESA chipsets: vesa
[ 25.111] (++) using VT number 7
[ 25.184] (II) [KMS] Kernel modesetting enabled.
[ 25.184] (WW) Falling back to old probe method for modesetting
[ 25.184] (WW) Falling back to old probe method for fbdev
[ 25.184] (II) Loading sub module "fbdevhw"
[ 25.184] (II) LoadModule: "fbdevhw"
[ 25.184] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 25.280] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 25.280] compiled for 1.17.1, module version = 0.0.2
[ 25.280] ABI class: X.Org Video Driver, version 19.0
[ 25.280] (WW) Falling back to old probe method for vesa
[ 25.280] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 25.280] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 25.280] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 25.280] (==) RADEON(0): Default visual is TrueColor
[ 25.280] (==) RADEON(0): RGB weight 888
[ 25.280] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 25.280] (--) RADEON(0): Chipset: "ATI Radeon 3000 Graphics" (ChipID = 0x9616)
[ 25.280] (II) Loading sub module "dri2"
[ 25.280] (II) LoadModule: "dri2"
[ 25.280] (II) Module "dri2" already built-in
[ 25.280] (II) Loading sub module "exa"
[ 25.280] (II) LoadModule: "exa"
[ 25.281] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 25.406] (II) Module exa: vendor="X.Org Foundation"
[ 25.406] compiled for 1.17.1, module version = 2.6.0
[ 25.406] ABI class: X.Org Video Driver, version 19.0
[ 25.406] (II) RADEON(0): KMS Color Tiling: enabled
[ 25.406] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 25.406] (II) RADEON(0): KMS Pageflipping: enabled
[ 25.406] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 25.440] (II) RADEON(0): Output VGA-0 has no monitor section
[ 25.471] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 25.510] (II) RADEON(0): EDID for output VGA-0
[ 25.541] (II) RADEON(0): EDID for output HDMI-0
[ 25.541] (II) RADEON(0): Manufacturer: BBY Model: bb20 Serial#: 16843009
[ 25.541] (II) RADEON(0): Year: 2012 Week: 0
[ 25.541] (II) RADEON(0): EDID Version: 1.3
[ 25.541] (II) RADEON(0): Digital Display Input
[ 25.541] (II) RADEON(0): DFP 1.x compatible TMDS
[ 25.541] (II) RADEON(0): Max Image Size [cm]: horiz.: 44 vert.: 25
[ 25.541] (II) RADEON(0): Gamma: 2.20
[ 25.541] (II) RADEON(0): DPMS capabilities: Off
[ 25.541] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 25.541] (II) RADEON(0): First detailed timing is preferred mode
[ 25.541] (II) RADEON(0): redX: 0.645 redY: 0.331 greenX: 0.335 greenY: 0.621
[ 25.541] (II) RADEON(0): blueX: 0.152 blueY: 0.053 whiteX: 0.313 whiteY: 0.329
[ 25.541] (II) RADEON(0): Supported established timings:
[ 25.541] (II) RADEON(0): 720x400@70Hz
[ 25.541] (II) RADEON(0): 640x480@60Hz
[ 25.541] (II) RADEON(0): 640x480@67Hz
[ 25.541] (II) RADEON(0): 640x480@72Hz
[ 25.541] (II) RADEON(0): 640x480@75Hz
[ 25.541] (II) RADEON(0): 800x600@56Hz
[ 25.541] (II) RADEON(0): 800x600@60Hz
[ 25.541] (II) RADEON(0): 800x600@72Hz
[ 25.541] (II) RADEON(0): 800x600@75Hz
[ 25.541] (II) RADEON(0): 832x624@75Hz
[ 25.542] (II) RADEON(0): 1024x768@60Hz
[ 25.542] (II) RADEON(0): 1024x768@70Hz
[ 25.542] (II) RADEON(0): 1024x768@75Hz
[ 25.542] (II) RADEON(0): 1280x1024@75Hz
[ 25.542] (II) RADEON(0): 1152x864@75Hz
[ 25.542] (II) RADEON(0): Manufacturer's mask: 0
[ 25.542] (II) RADEON(0): Supported standard timings:
[ 25.542] (II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 25.542] (II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 25.542] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 25.542] (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 25.542] (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 25.542] (II) RADEON(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 25.542] (II) RADEON(0): Supported detailed timing:
[ 25.542] (II) RADEON(0): clock: 97.8 MHz Image Size: 442 x 249 mm
[ 25.542] (II) RADEON(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1760 h_border: 0
[ 25.542] (II) RADEON(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
[ 25.542] (II) RADEON(0): Supported detailed timing:
[ 25.542] (II) RADEON(0): clock: 85.5 MHz Image Size: 442 x 249 mm
[ 25.542] (II) RADEON(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
[ 25.542] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
[ 25.542] (II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 155 MHz
[ 25.542] (II) RADEON(0): Monitor name: NS-20EM50A13
[ 25.542] (II) RADEON(0): EDID (in hex):
[ 25.542] (II) RADEON(0): 00ffffffffffff00085920bb01010101
[ 25.542] (II) RADEON(0): 00160103812c19782a3c25a554559f27
[ 25.542] (II) RADEON(0): 0d5054bfef808180714f8140950f9500
[ 25.542] (II) RADEON(0): 81c0010101012f2640a060841a303020
[ 25.542] (II) RADEON(0): 3500baf91000001a662150b051001b30
[ 25.542] (II) RADEON(0): 40703600baf91000001e000000fd0037
[ 25.542] (II) RADEON(0): 4c1e520f000a202020202020000000fc
[ 25.542] (II) RADEON(0): 004e532d3230454d35304131330a00a6
[ 25.542] (II) RADEON(0): Printing probed modes for output HDMI-0
[ 25.542] (II) RADEON(0): Modeline "1600x900"x60.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
[ 25.542] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 25.542] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 25.542] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 25.542] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 25.542] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 25.542] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 25.542] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 25.542] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 25.542] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 25.542] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 25.542] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 25.542] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 25.542] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 25.542] (II) RADEON(0): Output VGA-0 disconnected
[ 25.542] (II) RADEON(0): Output HDMI-0 connected
[ 25.542] (II) RADEON(0): Using exact sizes for initial modes
[ 25.542] (II) RADEON(0): Output HDMI-0 using initial mode 1600x900
[ 25.542] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 25.542] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fa3b000
[ 25.542] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 25.542] (==) RADEON(0): DPI set to (96, 96)
[ 25.542] (II) Loading sub module "fb"
[ 25.542] (II) LoadModule: "fb"
[ 25.542] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.769] (II) Module fb: vendor="X.Org Foundation"
[ 25.769] compiled for 1.17.1, module version = 1.0.0
[ 25.769] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.769] (II) Loading sub module "ramdac"
[ 25.769] (II) LoadModule: "ramdac"
[ 25.769] (II) Module "ramdac" already built-in
[ 25.769] (II) UnloadModule: "modesetting"
[ 25.769] (II) Unloading modesetting
[ 25.769] (II) UnloadModule: "fbdev"
[ 25.769] (II) Unloading fbdev
[ 25.769] (II) UnloadSubModule: "fbdevhw"
[ 25.769] (II) Unloading fbdevhw
[ 25.769] (II) UnloadModule: "vesa"
[ 25.769] (II) Unloading vesa
[ 25.769] (--) Depth 24 pixmap format is 32 bpp
[ 25.818] (II) RADEON(0): [DRI2] Setup complete
[ 25.818] (II) RADEON(0): [DRI2] DRI driver: r600
[ 25.818] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 25.818] (II) RADEON(0): Front buffer size: 5652K
[ 25.818] (II) RADEON(0): VRAM usage limit set to 225496K
[ 25.853] (==) RADEON(0): Backing store enabled
[ 25.853] (II) RADEON(0): Direct rendering enabled
[ 25.853] (II) EXA(0): Driver allocated offscreen pixmaps
[ 25.853] (II) EXA(0): Driver registered support for the following operations:
[ 25.853] (II) Solid
[ 25.853] (II) Copy
[ 25.853] (II) Composite (RENDER acceleration)
[ 25.853] (II) UploadToScreen
[ 25.853] (II) DownloadFromScreen
[ 25.853] (II) RADEON(0): Acceleration enabled
[ 25.853] (==) RADEON(0): DPMS enabled
[ 25.853] (==) RADEON(0): Silken mouse enabled
[ 25.920] (II) RADEON(0): Set up textured video
[ 25.920] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 25.920] (II) RADEON(0): [XvMC] Extension initialized.
[ 25.920] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 26.100] (WW) RADEON(0): Option "PasswordFile" is not used
[ 26.100] (--) RandR disabled
[ 32.355] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 32.355] (II) AIGLX: enabled GLX_ARB_create_context
[ 32.355] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 32.355] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 32.355] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 32.355] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 32.355] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 32.355] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 32.355] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 32.357] (II) AIGLX: Loaded and initialized r600
[ 32.357] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 32.358] (II) RADEON(0): Setting screen physical size to 423 x 238
[ 35.161] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 35.161] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 35.161] (**) Power Button: Applying InputClass "keyboard-layout"
[ 35.161] (II) LoadModule: "evdev"
[ 35.206] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 35.498] (II) Module evdev: vendor="X.Org Foundation"
[ 35.498] compiled for 1.16.2, module version = 2.9.1
[ 35.499] Module class: X.Org XInput Driver
[ 35.499] ABI class: X.Org XInput driver, version 21.0
[ 35.499] (II) Using input driver 'evdev' for 'Power Button'
[ 35.499] (**) Power Button: always reports core events
[ 35.499] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 35.499] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 35.499] (--) evdev: Power Button: Found keys
[ 35.499] (II) evdev: Power Button: Configuring as keyboard
[ 35.499] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[ 35.499] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 35.499] (**) Option "xkb_rules" "evdev"
[ 35.499] (**) Option "xkb_model" "pc104"
[ 35.499] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 35.975] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 35.975] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 35.975] (**) Power Button: Applying InputClass "keyboard-layout"
[ 35.975] (II) Using input driver 'evdev' for 'Power Button'
[ 35.975] (**) Power Button: always reports core events
[ 35.975] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 35.975] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 35.975] (--) evdev: Power Button: Found keys
[ 35.975] (II) evdev: Power Button: Configuring as keyboard
[ 35.975] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event0"
[ 35.975] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 35.975] (**) Option "xkb_rules" "evdev"
[ 35.975] (**) Option "xkb_model" "pc104"
[ 35.976] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 35.977] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/event9)
[ 35.977] (**) Logitech Unifying Device. Wireless PID:1028: Applying InputClass "evdev pointer catchall"
[ 35.977] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1028'
[ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: always reports core events
[ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: Device: "/dev/input/event9"
[ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Vendor 0x46d Product 0xc52b
[ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found 20 mouse buttons
[ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found scroll wheel(s)
[ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found relative axes
[ 35.978] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found x and y relative axes
[ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Configuring as mouse
[ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Adding scrollwheel support
[ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: YAxisMapping: buttons 4 and 5
[ 35.978] (**) evdev: Logitech Unifying Device. Wireless PID:1028: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 35.978] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0006/input/input12/event9"
[ 35.978] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1028" (type: MOUSE, id 8)
[ 35.978] (II) evdev: Logitech Unifying Device. Wireless PID:1028: initialized for relative axes.
[ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) keeping acceleration scheme 1
[ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration profile 0
[ 35.978] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration factor: 2.000
[ 35.979] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration threshold: 4
[ 35.979] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/mouse1)
[ 35.979] (II) No input driver specified, ignoring this device.
[ 35.979] (II) This device may have been added with another device file.
[ 35.980] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event7)
[ 35.980] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 35.980] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
[ 35.980] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
[ 35.980] (**) Generic USB Keyboard: always reports core events
[ 35.980] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event7"
[ 35.980] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
[ 35.980] (--) evdev: Generic USB Keyboard: Found keys
[ 35.980] (II) evdev: Generic USB Keyboard: Configuring as keyboard
[ 35.980] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:040B:2000.0004/input/input10/event7"
[ 35.980] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 9)
[ 35.980] (**) Option "xkb_rules" "evdev"
[ 35.980] (**) Option "xkb_model" "pc104"
[ 35.980] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 35.981] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event8)
[ 35.981] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 35.981] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
[ 35.981] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
[ 35.981] (**) Generic USB Keyboard: always reports core events
[ 35.981] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event8"
[ 35.981] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
[ 35.981] (--) evdev: Generic USB Keyboard: Found scroll wheel(s)
[ 35.981] (II) evdev: Generic USB Keyboard: Forcing buttons for scroll wheel(s)
[ 35.981] (--) evdev: Generic USB Keyboard: Found relative axes
[ 35.981] (--) evdev: Generic USB Keyboard: Found x and y relative axes
[ 35.981] (--) evdev: Generic USB Keyboard: Found keys
[ 35.981] (II) evdev: Generic USB Keyboard: Configuring as mouse
[ 35.981] (II) evdev: Generic USB Keyboard: Configuring as keyboard
[ 35.981] (II) evdev: Generic USB Keyboard: Adding scrollwheel support
[ 35.981] (**) evdev: Generic USB Keyboard: YAxisMapping: buttons 4 and 5
[ 35.981] (**) evdev: Generic USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 35.981] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:040B:2000.0005/input/input11/event8"
[ 35.981] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 10)
[ 35.981] (**) Option "xkb_rules" "evdev"
[ 35.981] (**) Option "xkb_model" "pc104"
[ 35.981] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 35.981] (II) evdev: Generic USB Keyboard: initialized for relative axes.
[ 35.981] (**) Generic USB Keyboard: (accel) keeping acceleration scheme 1
[ 35.982] (**) Generic USB Keyboard: (accel) acceleration profile 0
[ 35.982] (**) Generic USB Keyboard: (accel) acceleration factor: 2.000
[ 35.982] (**) Generic USB Keyboard: (accel) acceleration threshold: 4
[ 35.982] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/mouse0)
[ 35.982] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
[ 35.982] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
[ 35.982] (**) Generic USB Keyboard: always reports core events
[ 35.982] (**) evdev: Generic USB Keyboard: Device: "/dev/input/mouse0"
[ 35.982] (EE) evdev: Generic USB Keyboard: Unable to query fd: Inappropriate ioctl for device
[ 36.060] (EE) PreInit returned 2 for "Generic USB Keyboard"
[ 36.060] (II) UnloadModule: "evdev"
[ 36.060] (II) config/udev: Adding input device HP Webcam HD-2200 (/dev/input/event10)
[ 36.060] (**) HP Webcam HD-2200: Applying InputClass "evdev keyboard catchall"
[ 36.060] (**) HP Webcam HD-2200: Applying InputClass "keyboard-layout"
[ 36.060] (II) Using input driver 'evdev' for 'HP Webcam HD-2200'
[ 36.060] (**) HP Webcam HD-2200: always reports core events
[ 36.061] (**) evdev: HP Webcam HD-2200: Device: "/dev/input/event10"
[ 36.061] (--) evdev: HP Webcam HD-2200: Vendor 0x3f0 Product 0xa707
[ 36.061] (--) evdev: HP Webcam HD-2200: Found keys
[ 36.061] (II) evdev: HP Webcam HD-2200: Configuring as keyboard
[ 36.061] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input13/event10"
[ 36.061] (II) XINPUT: Adding extended input device "HP Webcam HD-2200" (type: KEYBOARD, id 11)
[ 36.061] (**) Option "xkb_rules" "evdev"
[ 36.061] (**) Option "xkb_model" "pc104"
[ 36.061] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 36.062] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6)
[ 36.062] (II) No input driver specified, ignoring this device.
[ 36.062] (II) This device may have been added with another device file.
[ 36.063] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event5)
[ 36.063] (II) No input driver specified, ignoring this device.
[ 36.063] (II) This device may have been added with another device file.
[ 36.063] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event4)
[ 36.063] (II) No input driver specified, ignoring this device.
[ 36.063] (II) This device may have been added with another device file.
[ 36.064] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event3)
[ 36.064] (II) No input driver specified, ignoring this device.
[ 36.064] (II) This device may have been added with another device file.
[ 36.064] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event2)
[ 36.064] (II) No input driver specified, ignoring this device.
[ 36.064] (II) This device may have been added with another device file.
[ 53.210] (II) RADEON(0): EDID vendor "BBY", prod id 47904
[ 53.210] (II) RADEON(0): Using EDID range info for horizontal sync
[ 53.210] (II) RADEON(0): Using EDID range info for vertical refresh
[ 53.210] (II) RADEON(0): Printing DDC gathered Modelines:
[ 53.210] (II) RADEON(0): Modeline "1600x900"x0.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
[ 53.210] (II) RADEON(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 53.210] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 53.210] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 53.210] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 53.210] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 53.210] (II) RADEON(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 62.870] (II) AIGLX: Suspending AIGLX clients for VT switch
Last edited by mavo (2015-03-17 13:08:53)alphaniner wrote:The preferred way to test a 'default session' is with a clean non-root user. Logging in as root can hide other issues.
Ok i get that. Here is xorg log and journalctl -b log. I rebooted tried to login through lxdm and got the cursor and blank screen. I then tty3 and startx and launched into openbox to post these results. Still cannot get into xfce as normal user. Thoughts???
~.local/share/xorg/Xorg.1.log
[ 84.848]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 84.848] X Protocol Version 11, Revision 0
[ 84.848] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 84.848] Current Operating System: Linux arch-server 3.14.35-1-lts #1 SMP Sat Mar 7 19:24:12 CET 2015 x86_64
[ 84.848] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
[ 84.848] Build Date: 14 March 2015 06:45:50PM
[ 84.849]
[ 84.849] Current version of pixman: 0.32.6
[ 84.849] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 84.849] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 84.850] (==) Log file: "/home/molmedo1/.local/share/xorg/Xorg.1.log", Time: Wed Mar 18 10:06:18 2015
[ 84.850] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 84.850] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 84.851] (==) No Layout section. Using the first Screen section.
[ 84.851] (**) |-->Screen "Default Screen" (0)
[ 84.851] (**) | |-->Monitor "<default monitor>"
[ 84.851] (==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
[ 84.851] (==) Automatically adding devices
[ 84.851] (==) Automatically enabling devices
[ 84.851] (==) Automatically adding GPU devices
[ 84.851] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 84.851] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 84.851] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 84.851] (II) Loader magic: 0x815d80
[ 84.851] (II) Module ABI versions:
[ 84.851] X.Org ANSI C Emulation: 0.4
[ 84.851] X.Org Video Driver: 19.0
[ 84.851] X.Org XInput driver : 21.0
[ 84.851] X.Org Server Extension : 9.0
[ 84.856] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 84.856] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 84.857] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 84.859] (--) PCI:*(0:1:5:0) 1002:9616:1462:7641 rev 0, Mem @ 0xd0000000/268435456, 0xfebe0000/65536, 0xfea00000/1048576, I/O @ 0x0000d000/256
[ 84.859] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 84.859] (II) "glx" will be loaded by default.
[ 84.859] (II) LoadModule: "vnc"
[ 84.860] (II) Loading /usr/lib/xorg/modules/extensions/libvnc.so
[ 84.868] (II) Module vnc: vendor="Constantin Kaplinsky"
[ 84.868] compiled for 1.17.1, module version = 1.0.0
[ 84.868] Module class: X.Org Server Extension
[ 84.868] ABI class: X.Org Server Extension, version 9.0
[ 84.868] (II) LoadModule: "glx"
[ 84.868] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 84.870] (II) Module glx: vendor="X.Org Foundation"
[ 84.870] compiled for 1.17.1, module version = 1.0.0
[ 84.870] ABI class: X.Org Server Extension, version 9.0
[ 84.870] (==) AIGLX enabled
[ 84.870] (==) Matched ati as autoconfigured driver 0
[ 84.870] (==) Matched ati as autoconfigured driver 1
[ 84.870] (==) Matched modesetting as autoconfigured driver 2
[ 84.870] (==) Matched fbdev as autoconfigured driver 3
[ 84.870] (==) Matched vesa as autoconfigured driver 4
[ 84.870] (==) Assigned the driver to the xf86ConfigLayout
[ 84.870] (II) LoadModule: "ati"
[ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 84.871] (II) Module ati: vendor="X.Org Foundation"
[ 84.871] compiled for 1.17.0, module version = 7.5.0
[ 84.871] Module class: X.Org Video Driver
[ 84.871] ABI class: X.Org Video Driver, version 19.0
[ 84.871] (II) LoadModule: "radeon"
[ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 84.871] (II) Module radeon: vendor="X.Org Foundation"
[ 84.871] compiled for 1.17.0, module version = 7.5.0
[ 84.871] Module class: X.Org Video Driver
[ 84.871] ABI class: X.Org Video Driver, version 19.0
[ 84.871] (II) LoadModule: "modesetting"
[ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 84.871] (II) Module modesetting: vendor="X.Org Foundation"
[ 84.871] compiled for 1.17.1, module version = 1.17.1
[ 84.871] Module class: X.Org Video Driver
[ 84.871] ABI class: X.Org Video Driver, version 19.0
[ 84.871] (II) LoadModule: "fbdev"
[ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 84.871] (II) Module fbdev: vendor="X.Org Foundation"
[ 84.871] compiled for 1.17.0, module version = 0.4.4
[ 84.871] Module class: X.Org Video Driver
[ 84.871] ABI class: X.Org Video Driver, version 19.0
[ 84.871] (II) LoadModule: "vesa"
[ 84.871] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 84.871] (II) Module vesa: vendor="X.Org Foundation"
[ 84.871] compiled for 1.17.0, module version = 2.3.2
[ 84.871] Module class: X.Org Video Driver
[ 84.871] ABI class: X.Org Video Driver, version 19.0
[ 84.871] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
[ 84.876] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 84.876] (II) FBDEV: driver for framebuffer: fbdev
[ 84.876] (II) VESA: driver for VESA chipsets: vesa
[ 84.876] (++) using VT number 3
[ 84.876] (--) controlling tty is VT number 3, auto-enabling KeepTty
[ 84.876] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 84.876] (II) [KMS] Kernel modesetting enabled.
[ 84.876] (WW) Falling back to old probe method for modesetting
[ 84.876] (WW) Falling back to old probe method for fbdev
[ 84.876] (II) Loading sub module "fbdevhw"
[ 84.876] (II) LoadModule: "fbdevhw"
[ 84.876] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 84.876] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 84.876] compiled for 1.17.1, module version = 0.0.2
[ 84.876] ABI class: X.Org Video Driver, version 19.0
[ 84.876] (WW) Falling back to old probe method for vesa
[ 84.876] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 84.876] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 84.876] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 84.876] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 84.876] (==) RADEON(0): Default visual is TrueColor
[ 84.876] (==) RADEON(0): RGB weight 888
[ 84.876] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 84.876] (--) RADEON(0): Chipset: "ATI Radeon 3000 Graphics" (ChipID = 0x9616)
[ 84.876] (II) Loading sub module "dri2"
[ 84.876] (II) LoadModule: "dri2"
[ 84.876] (II) Module "dri2" already built-in
[ 84.876] (II) Loading sub module "exa"
[ 84.876] (II) LoadModule: "exa"
[ 84.877] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 84.877] (II) Module exa: vendor="X.Org Foundation"
[ 84.877] compiled for 1.17.1, module version = 2.6.0
[ 84.877] ABI class: X.Org Video Driver, version 19.0
[ 84.877] (II) RADEON(0): KMS Color Tiling: enabled
[ 84.877] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 84.877] (II) RADEON(0): KMS Pageflipping: enabled
[ 84.877] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 84.920] (II) RADEON(0): Output VGA-0 has no monitor section
[ 84.951] (II) RADEON(0): Output HDMI-0 has no monitor section
[ 84.990] (II) RADEON(0): EDID for output VGA-0
[ 85.021] (II) RADEON(0): EDID for output HDMI-0
[ 85.021] (II) RADEON(0): Manufacturer: BBY Model: bb20 Serial#: 16843009
[ 85.021] (II) RADEON(0): Year: 2012 Week: 0
[ 85.021] (II) RADEON(0): EDID Version: 1.3
[ 85.021] (II) RADEON(0): Digital Display Input
[ 85.021] (II) RADEON(0): DFP 1.x compatible TMDS
[ 85.021] (II) RADEON(0): Max Image Size [cm]: horiz.: 44 vert.: 25
[ 85.021] (II) RADEON(0): Gamma: 2.20
[ 85.021] (II) RADEON(0): DPMS capabilities: Off
[ 85.021] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 85.021] (II) RADEON(0): First detailed timing is preferred mode
[ 85.021] (II) RADEON(0): redX: 0.645 redY: 0.331 greenX: 0.335 greenY: 0.621
[ 85.021] (II) RADEON(0): blueX: 0.152 blueY: 0.053 whiteX: 0.313 whiteY: 0.329
[ 85.021] (II) RADEON(0): Supported established timings:
[ 85.021] (II) RADEON(0): 720x400@70Hz
[ 85.021] (II) RADEON(0): 640x480@60Hz
[ 85.021] (II) RADEON(0): 640x480@67Hz
[ 85.021] (II) RADEON(0): 640x480@72Hz
[ 85.021] (II) RADEON(0): 640x480@75Hz
[ 85.021] (II) RADEON(0): 800x600@56Hz
[ 85.021] (II) RADEON(0): 800x600@60Hz
[ 85.021] (II) RADEON(0): 800x600@72Hz
[ 85.021] (II) RADEON(0): 800x600@75Hz
[ 85.021] (II) RADEON(0): 832x624@75Hz
[ 85.021] (II) RADEON(0): 1024x768@60Hz
[ 85.021] (II) RADEON(0): 1024x768@70Hz
[ 85.021] (II) RADEON(0): 1024x768@75Hz
[ 85.021] (II) RADEON(0): 1280x1024@75Hz
[ 85.021] (II) RADEON(0): 1152x864@75Hz
[ 85.021] (II) RADEON(0): Manufacturer's mask: 0
[ 85.021] (II) RADEON(0): Supported standard timings:
[ 85.021] (II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 85.021] (II) RADEON(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 85.021] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 85.021] (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 85.021] (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 85.021] (II) RADEON(0): #5: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 85.021] (II) RADEON(0): Supported detailed timing:
[ 85.021] (II) RADEON(0): clock: 97.8 MHz Image Size: 442 x 249 mm
[ 85.021] (II) RADEON(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1760 h_border: 0
[ 85.021] (II) RADEON(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
[ 85.021] (II) RADEON(0): Supported detailed timing:
[ 85.021] (II) RADEON(0): clock: 85.5 MHz Image Size: 442 x 249 mm
[ 85.021] (II) RADEON(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
[ 85.021] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
[ 85.021] (II) RADEON(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 155 MHz
[ 85.021] (II) RADEON(0): Monitor name: NS-20EM50A13
[ 85.021] (II) RADEON(0): EDID (in hex):
[ 85.021] (II) RADEON(0): 00ffffffffffff00085920bb01010101
[ 85.021] (II) RADEON(0): 00160103812c19782a3c25a554559f27
[ 85.021] (II) RADEON(0): 0d5054bfef808180714f8140950f9500
[ 85.021] (II) RADEON(0): 81c0010101012f2640a060841a303020
[ 85.021] (II) RADEON(0): 3500baf91000001a662150b051001b30
[ 85.021] (II) RADEON(0): 40703600baf91000001e000000fd0037
[ 85.022] (II) RADEON(0): 4c1e520f000a202020202020000000fc
[ 85.022] (II) RADEON(0): 004e532d3230454d35304131330a00a6
[ 85.022] (II) RADEON(0): Printing probed modes for output HDMI-0
[ 85.022] (II) RADEON(0): Modeline "1600x900"x60.0 97.75 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.5 kHz eP)
[ 85.022] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 85.022] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 85.022] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 85.022] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 85.022] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 85.022] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 85.022] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 85.022] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 85.022] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 85.022] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 85.022] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 85.022] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 85.022] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 85.022] (II) RADEON(0): Output VGA-0 disconnected
[ 85.022] (II) RADEON(0): Output HDMI-0 connected
[ 85.022] (II) RADEON(0): Using exact sizes for initial modes
[ 85.022] (II) RADEON(0): Output HDMI-0 using initial mode 1600x900
[ 85.022] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 85.022] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fa3b000
[ 85.022] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 85.022] (==) RADEON(0): DPI set to (96, 96)
[ 85.022] (II) Loading sub module "fb"
[ 85.022] (II) LoadModule: "fb"
[ 85.022] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 85.022] (II) Module fb: vendor="X.Org Foundation"
[ 85.022] compiled for 1.17.1, module version = 1.0.0
[ 85.022] ABI class: X.Org ANSI C Emulation, version 0.4
[ 85.022] (II) Loading sub module "ramdac"
[ 85.022] (II) LoadModule: "ramdac"
[ 85.022] (II) Module "ramdac" already built-in
[ 85.022] (II) UnloadModule: "modesetting"
[ 85.022] (II) Unloading modesetting
[ 85.022] (II) UnloadModule: "fbdev"
[ 85.022] (II) Unloading fbdev
[ 85.022] (II) UnloadSubModule: "fbdevhw"
[ 85.022] (II) Unloading fbdevhw
[ 85.022] (II) UnloadModule: "vesa"
[ 85.022] (II) Unloading vesa
[ 85.022] (--) Depth 24 pixmap format is 32 bpp
[ 85.023] (II) RADEON(0): [DRI2] Setup complete
[ 85.023] (II) RADEON(0): [DRI2] DRI driver: r600
[ 85.023] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 85.023] (II) RADEON(0): Front buffer size: 5652K
[ 85.023] (II) RADEON(0): VRAM usage limit set to 225496K
[ 85.023] (==) RADEON(0): Backing store enabled
[ 85.023] (II) RADEON(0): Direct rendering enabled
[ 85.023] (II) EXA(0): Driver allocated offscreen pixmaps
[ 85.023] (II) EXA(0): Driver registered support for the following operations:
[ 85.023] (II) Solid
[ 85.023] (II) Copy
[ 85.023] (II) Composite (RENDER acceleration)
[ 85.023] (II) UploadToScreen
[ 85.023] (II) DownloadFromScreen
[ 85.023] (II) RADEON(0): Acceleration enabled
[ 85.023] (==) RADEON(0): DPMS enabled
[ 85.023] (==) RADEON(0): Silken mouse enabled
[ 85.023] (II) RADEON(0): Set up textured video
[ 85.023] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 85.023] (II) RADEON(0): [XvMC] Extension initialized.
[ 85.023] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 85.023] (WW) RADEON(0): Option "PasswordFile" is not used
[ 85.023] (--) RandR disabled
[ 85.047] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 85.047] (II) AIGLX: enabled GLX_ARB_create_context
[ 85.047] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 85.047] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 85.047] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 85.047] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 85.047] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 85.047] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 85.047] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 85.048] (II) AIGLX: Loaded and initialized r600
[ 85.048] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 85.048] (II) RADEON(0): Setting screen physical size to 423 x 238
[ 85.088] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 85.088] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 85.088] (**) Power Button: Applying InputClass "keyboard-layout"
[ 85.088] (II) LoadModule: "evdev"
[ 85.088] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 85.089] (II) Module evdev: vendor="X.Org Foundation"
[ 85.089] compiled for 1.16.2, module version = 2.9.1
[ 85.089] Module class: X.Org XInput Driver
[ 85.089] ABI class: X.Org XInput driver, version 21.0
[ 85.089] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 13 paused 0
[ 85.090] (II) Using input driver 'evdev' for 'Power Button'
[ 85.090] (**) Power Button: always reports core events
[ 85.090] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 85.090] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 85.090] (--) evdev: Power Button: Found keys
[ 85.090] (II) evdev: Power Button: Configuring as keyboard
[ 85.090] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[ 85.090] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 85.090] (**) Option "xkb_rules" "evdev"
[ 85.090] (**) Option "xkb_model" "pc104"
[ 85.090] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 85.123] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 85.123] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 85.123] (**) Power Button: Applying InputClass "keyboard-layout"
[ 85.124] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 14 paused 0
[ 85.124] (II) Using input driver 'evdev' for 'Power Button'
[ 85.124] (**) Power Button: always reports core events
[ 85.124] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 85.124] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 85.124] (--) evdev: Power Button: Found keys
[ 85.124] (II) evdev: Power Button: Configuring as keyboard
[ 85.124] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event0"
[ 85.124] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 85.124] (**) Option "xkb_rules" "evdev"
[ 85.124] (**) Option "xkb_model" "pc104"
[ 85.124] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 85.125] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/event9)
[ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: Applying InputClass "evdev pointer catchall"
[ 85.125] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 15 paused 0
[ 85.125] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1028'
[ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: always reports core events
[ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: Device: "/dev/input/event9"
[ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Vendor 0x46d Product 0xc52b
[ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found 20 mouse buttons
[ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found scroll wheel(s)
[ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found relative axes
[ 85.125] (--) evdev: Logitech Unifying Device. Wireless PID:1028: Found x and y relative axes
[ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Configuring as mouse
[ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: Adding scrollwheel support
[ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: YAxisMapping: buttons 4 and 5
[ 85.125] (**) evdev: Logitech Unifying Device. Wireless PID:1028: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 85.125] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0006/input/input12/event9"
[ 85.125] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1028" (type: MOUSE, id 8)
[ 85.125] (II) evdev: Logitech Unifying Device. Wireless PID:1028: initialized for relative axes.
[ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) keeping acceleration scheme 1
[ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration profile 0
[ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration factor: 2.000
[ 85.125] (**) Logitech Unifying Device. Wireless PID:1028: (accel) acceleration threshold: 4
[ 85.126] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/mouse1)
[ 85.126] (II) No input driver specified, ignoring this device.
[ 85.126] (II) This device may have been added with another device file.
[ 85.126] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event7)
[ 85.126] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 85.126] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
[ 85.126] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 16 paused 0
[ 85.126] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
[ 85.126] (**) Generic USB Keyboard: always reports core events
[ 85.126] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event7"
[ 85.126] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
[ 85.126] (--) evdev: Generic USB Keyboard: Found keys
[ 85.126] (II) evdev: Generic USB Keyboard: Configuring as keyboard
[ 85.126] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.0/0003:040B:2000.0004/input/input10/event7"
[ 85.126] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 9)
[ 85.126] (**) Option "xkb_rules" "evdev"
[ 85.126] (**) Option "xkb_model" "pc104"
[ 85.126] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 85.127] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/event8)
[ 85.127] (**) Generic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 85.127] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
[ 85.127] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 17 paused 0
[ 85.127] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
[ 85.127] (**) Generic USB Keyboard: always reports core events
[ 85.127] (**) evdev: Generic USB Keyboard: Device: "/dev/input/event8"
[ 85.127] (--) evdev: Generic USB Keyboard: Vendor 0x40b Product 0x2000
[ 85.127] (--) evdev: Generic USB Keyboard: Found scroll wheel(s)
[ 85.127] (II) evdev: Generic USB Keyboard: Forcing buttons for scroll wheel(s)
[ 85.127] (--) evdev: Generic USB Keyboard: Found relative axes
[ 85.127] (--) evdev: Generic USB Keyboard: Found x and y relative axes
[ 85.127] (--) evdev: Generic USB Keyboard: Found keys
[ 85.127] (II) evdev: Generic USB Keyboard: Configuring as mouse
[ 85.127] (II) evdev: Generic USB Keyboard: Configuring as keyboard
[ 85.127] (II) evdev: Generic USB Keyboard: Adding scrollwheel support
[ 85.127] (**) evdev: Generic USB Keyboard: YAxisMapping: buttons 4 and 5
[ 85.127] (**) evdev: Generic USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 85.127] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb1/1-3/1-3:1.1/0003:040B:2000.0005/input/input11/event8"
[ 85.127] (II) XINPUT: Adding extended input device "Generic USB Keyboard" (type: KEYBOARD, id 10)
[ 85.127] (**) Option "xkb_rules" "evdev"
[ 85.127] (**) Option "xkb_model" "pc104"
[ 85.127] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 85.128] (II) evdev: Generic USB Keyboard: initialized for relative axes.
[ 85.128] (**) Generic USB Keyboard: (accel) keeping acceleration scheme 1
[ 85.128] (**) Generic USB Keyboard: (accel) acceleration profile 0
[ 85.128] (**) Generic USB Keyboard: (accel) acceleration factor: 2.000
[ 85.128] (**) Generic USB Keyboard: (accel) acceleration threshold: 4
[ 85.128] (II) config/udev: Adding input device Generic USB Keyboard (/dev/input/mouse0)
[ 85.128] (**) Generic USB Keyboard: Applying InputClass "keyboard-layout"
[ 85.128] (II) Using input driver 'evdev' for 'Generic USB Keyboard'
[ 85.128] (**) Generic USB Keyboard: always reports core events
[ 85.128] (**) evdev: Generic USB Keyboard: Device: "/dev/input/mouse0"
[ 85.128] (EE) evdev: Generic USB Keyboard: Unable to query fd: Inappropriate ioctl for device
[ 85.220] (EE) PreInit returned 2 for "Generic USB Keyboard"
[ 85.220] (II) UnloadModule: "evdev"
[ 85.220] (II) config/udev: Adding input device HP Webcam HD-2200 (/dev/input/event10)
[ 85.220] (**) HP Webcam HD-2200: Applying InputClass "evdev keyboard catchall"
[ 85.220] (**) HP Webcam HD-2200: Applying InputClass "keyboard-layout"
[ 85.221] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 18 paused 0
[ 85.221] (II) Using input driver 'evdev' for 'HP Webcam HD-2200'
[ 85.221] (**) HP Webcam HD-2200: always reports core events
[ 85.221] (**) evdev: HP Webcam HD-2200: Device: "/dev/input/event10"
[ 85.221] (--) evdev: HP Webcam HD-2200: Vendor 0x3f0 Product 0xa707
[ 85.221] (--) evdev: HP Webcam HD-2200: Found keys
[ 85.221] (II) evdev: HP Webcam HD-2200: Configuring as keyboard
[ 85.221] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb6/6-5/6-5:1.0/input/input13/event10"
[ 85.222] (II) XINPUT: Adding extended input device "HP Webcam HD-2200" (type: KEYBOARD, id 11)
[ 85.222] (**) Option "xkb_rules" "evdev"
[ 85.222] (**) Option "xkb_model" "pc104"
[ 85.222] (**) Option "xkb_layout" "us, gb, ru, ca, fr"
[ 85.223] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event6)
[ 85.223] (II) No input driver specified, ignoring this device.
[ 85.223] (II) This device may have been added with another device file.
[ 85.223] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event5)
[ 85.223] (II) No input driver specified, ignoring this device.
[ 85.223] (II) This device may have been added with another device file.
[ 85.224] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event4)
[ 85.224] (II) No input driver specified, ignoring this device.
[ 85.224] (II) This device may have been added with another device file.
[ 85.224] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event3)
[ 85.225] (II) No input driver specified, ignoring this device.
[ 85.225] (II) This device may have been added with another device file.
[ 85.225] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event2)
[ 85.225] (II) No input driver specified, ignoring this device.
[ 85.225] (II) This device may have been added with another device file.
journalctl -b
Mar 18 10:05:02 arch-server kernel: 00000-9FFFF write-back
Mar 18 10:05:02 arch-server kernel: A0000-EFFFF uncachable
Mar 18 10:05:02 arch-server kernel: F0000-FFFFF write-protect
Mar 18 10:05:02 arch-server kernel: MTRR variable ranges enabled:
Mar 18 10:05:02 arch-server kernel: 0 base 000000000000 mask FFFF80000000 write-back
Mar 18 10:05:02 arch-server kernel: 1 base 000080000000 mask FFFFC0000000 write-back
Mar 18 10:05:02 arch-server kernel: 2 base 0000C0000000 mask FFFFF0000000 write-back
Mar 18 10:05:02 arch-server kernel: 3 disabled
Mar 18 10:05:02 arch-server kernel: 4 disabled
Mar 18 10:05:02 arch-server kernel: 5 disabled
Mar 18 10:05:02 arch-server kernel: 6 disabled
Mar 18 10:05:02 arch-server kernel: 7 disabled
Mar 18 10:05:02 arch-server kernel: TOM2: 0000000430000000 aka 17152M
Mar 18 10:05:03 arch-server kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Mar 18 10:05:03 arch-server kernel: e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
Mar 18 10:05:03 arch-server kernel: e820: last_pfn = 0xcff90 max_arch_pfn = 0x400000000
Mar 18 10:05:03 arch-server kernel: found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Mar 18 10:05:03 arch-server kernel: Scanning 1 areas for low memory corruption
Mar 18 10:05:03 arch-server kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
Mar 18 10:05:03 arch-server kernel: Using GB pages for direct mapping
Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Mar 18 10:05:03 arch-server kernel: [mem 0x00000000-0x000fffff] page 4k
Mar 18 10:05:03 arch-server kernel: BRK [0x01b3e000, 0x01b3efff] PGTABLE
Mar 18 10:05:03 arch-server kernel: BRK [0x01b3f000, 0x01b3ffff] PGTABLE
Mar 18 10:05:03 arch-server kernel: BRK [0x01b40000, 0x01b40fff] PGTABLE
Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x41fe00000-0x41fffffff]
Mar 18 10:05:03 arch-server kernel: [mem 0x41fe00000-0x41fffffff] page 2M
Mar 18 10:05:03 arch-server kernel: BRK [0x01b41000, 0x01b41fff] PGTABLE
Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x41c000000-0x41fdfffff]
Mar 18 10:05:03 arch-server kernel: [mem 0x41c000000-0x41fdfffff] page 2M
Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x400000000-0x41bffffff]
Mar 18 10:05:03 arch-server kernel: [mem 0x400000000-0x41bffffff] page 2M
Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x00100000-0xcff8ffff]
Mar 18 10:05:03 arch-server kernel: [mem 0x00100000-0x001fffff] page 4k
Mar 18 10:05:03 arch-server kernel: [mem 0x00200000-0x3fffffff] page 2M
Mar 18 10:05:03 arch-server kernel: [mem 0x40000000-0xbfffffff] page 1G
Mar 18 10:05:03 arch-server kernel: [mem 0xc0000000-0xcfdfffff] page 2M
Mar 18 10:05:03 arch-server kernel: [mem 0xcfe00000-0xcff8ffff] page 4k
Mar 18 10:05:03 arch-server kernel: init_memory_mapping: [mem 0x100000000-0x3ffffffff]
Mar 18 10:05:03 arch-server kernel: [mem 0x100000000-0x3ffffffff] page 1G
Mar 18 10:05:03 arch-server kernel: RAMDISK: [mem 0x3784e000-0x37c1efff]
Mar 18 10:05:03 arch-server kernel: ACPI: RSDP 00000000000f8d00 000014 (v00 ACPIAM)
Mar 18 10:05:03 arch-server kernel: ACPI: RSDT 00000000cff90000 00003C (v01 7641MS A7641100 20130428 MSFT 00000097)
Mar 18 10:05:03 arch-server kernel: ACPI: FACP 00000000cff90200 000084 (v01 7641MS A7641100 20130428 MSFT 00000097)
Mar 18 10:05:03 arch-server kernel: ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131218/
Mar 18 10:05:03 arch-server kernel: ACPI: DSDT 00000000cff90660 009DF0 (v01 A7641 A7641100 00000100 INTL 20051117)
Mar 18 10:05:03 arch-server kernel: ACPI: FACS 00000000cff9e000 000040
Mar 18 10:05:03 arch-server kernel: ACPI: APIC 00000000cff90390 00010C (v01 7641MS A7641100 20130428 MSFT 00000097)
Mar 18 10:05:03 arch-server kernel: ACPI: MCFG 00000000cff904a0 00003C (v01 7641MS OEMMCFG 20130428 MSFT 00000097)
Mar 18 10:05:03 arch-server kernel: ACPI: OEMB 00000000cff9e040 000072 (v01 7641MS A7641100 20130428 MSFT 00000097)
Mar 18 10:05:03 arch-server kernel: ACPI: HPET 00000000cff9a660 000038 (v01 7641MS OEMHPET 20130428 MSFT 00000097)
Mar 18 10:05:03 arch-server kernel: ACPI: SSDT 00000000cff9a6a0 000D40 (v01 A M I POWERNOW 00000001 AMD 00000001)
Mar 18 10:05:03 arch-server kernel: ACPI: Local APIC address 0xfee00000
Mar 18 10:05:03 arch-server kernel: No NUMA configuration found
Mar 18 10:05:03 arch-server kernel: Faking a node at [mem 0x0000000000000000-0x000000041fffffff]
Mar 18 10:05:03 arch-server kernel: Initmem setup node 0 [mem 0x00000000-0x41fffffff]
Mar 18 10:05:03 arch-server kernel: NODE_DATA [mem 0x41fff9000-0x41fffdfff]
Mar 18 10:05:03 arch-server kernel: [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040fa00000-ffff88041f5fffff] on node 0
Mar 18 10:05:03 arch-server kernel: Zone ranges:
Mar 18 10:05:03 arch-server kernel: DMA [mem 0x00001000-0x00ffffff]
Mar 18 10:05:03 arch-server kernel: DMA32 [mem 0x01000000-0xffffffff]
Mar 18 10:05:03 arch-server kernel: Normal [mem 0x100000000-0x41fffffff]
Mar 18 10:05:03 arch-server kernel: Movable zone start for each node
Mar 18 10:05:03 arch-server kernel: Early memory node ranges
Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x00001000-0x0009efff]
Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x00100000-0xcff8ffff]
Mar 18 10:05:03 arch-server kernel: node 0: [mem 0x100000000-0x41fffffff]
Mar 18 10:05:03 arch-server kernel: On node 0 totalpages: 4128558
Mar 18 10:05:03 arch-server kernel: DMA zone: 64 pages used for memmap
Mar 18 10:05:03 arch-server kernel: DMA zone: 21 pages reserved
Mar 18 10:05:03 arch-server kernel: DMA zone: 3998 pages, LIFO batch:0
Mar 18 10:05:03 arch-server kernel: DMA32 zone: 13247 pages used for memmap
Mar 18 10:05:03 arch-server kernel: DMA32 zone: 847760 pages, LIFO batch:31
Mar 18 10:05:03 arch-server kernel: Normal zone: 51200 pages used for memmap
Mar 18 10:05:03 arch-server kernel: Normal zone: 3276800 pages, LIFO batch:31
Mar 18 10:05:03 arch-server kernel: ACPI: PM-Timer IO Port: 0x808
Mar 18 10:05:03 arch-server kernel: ACPI: Local APIC address 0xfee00000
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
Mar 18 10:05:03 arch-server kernel: ACPI: IOAPIC (id[0x14] address[0xfec00000] gsi_base[0])
Mar 18 10:05:03 arch-server kernel: IOAPIC[0]: apic_id 20, version 33, address 0xfec00000, GSI 0-23
Mar 18 10:05:03 arch-server kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar 18 10:05:03 arch-server kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Mar 18 10:05:03 arch-server kernel: ACPI: IRQ0 used by override.
Mar 18 10:05:03 arch-server kernel: ACPI: IRQ2 used by override.
Mar 18 10:05:03 arch-server kernel: ACPI: IRQ9 used by override.
Mar 18 10:05:03 arch-server kernel: Using ACPI (MADT) for SMP configuration information
Mar 18 10:05:03 arch-server kernel: ACPI: HPET id: 0x8300 base: 0xfed00000
Mar 18 10:05:03 arch-server kernel: smpboot: Allowing 24 CPUs, 20 hotplug CPUs
Mar 18 10:05:03 arch-server kernel: nr_irqs_gsi: 40
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcff90000-0xcff9dfff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcff9e000-0xcffdffff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xd0000000-0xffdfffff]
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
Mar 18 10:05:03 arch-server kernel: e820: [mem 0xd0000000-0xffdfffff] available for PCI devices
Mar 18 10:05:03 arch-server kernel: Booting paravirtualized kernel on bare hardware
Mar 18 10:05:03 arch-server kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:24 nr_node_ids:1
Mar 18 10:05:03 arch-server kernel: PERCPU: Embedded 27 pages/cpu @ffff88040f600000 s81664 r8192 d20736 u131072
Mar 18 10:05:03 arch-server kernel: pcpu-alloc: s81664 r8192 d20736 u131072 alloc=1*2097152
Mar 18 10:05:03 arch-server kernel: pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Mar 18 10:05:03 arch-server kernel: pcpu-alloc: [0] 16 17 18 19 20 21 22 23 -- -- -- -- -- -- -- --
Mar 18 10:05:03 arch-server kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4064026
Mar 18 10:05:03 arch-server kernel: Policy zone: Normal
Mar 18 10:05:03 arch-server kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d6352b14-5ca7-476a-9f43-2bc25278effd rw quiet
Mar 18 10:05:03 arch-server kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Mar 18 10:05:03 arch-server kernel: xsave: enabled xstate_bv 0x7, cntxt size 0x340
Mar 18 10:05:03 arch-server kernel: Checking aperture...
Mar 18 10:05:03 arch-server kernel: No AGP bridge found
Mar 18 10:05:03 arch-server kernel: Node 0: aperture @ 0 size 32 MB
Mar 18 10:05:03 arch-server kernel: Your BIOS doesn't leave a aperture memory hole
Mar 18 10:05:03 arch-server kernel: Please enable the IOMMU option in the BIOS setup
Mar 18 10:05:03 arch-server kernel: This costs you 64 MB of RAM
Mar 18 10:05:03 arch-server kernel: Mapping aperture over 65536 KB of RAM @ c4000000
Mar 18 10:05:03 arch-server kernel: PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Mar 18 10:05:03 arch-server kernel: Memory: 16106196K/16514232K available (5183K kernel code, 859K rwdata, 1640K rodata, 1128K init, 1300K bss, 408036K reserv
Mar 18 10:05:03 arch-server kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1
Mar 18 10:05:03 arch-server kernel: Hierarchical RCU implementation.
Mar 18 10:05:03 arch-server kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=24.
Mar 18 10:05:03 arch-server kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24
Mar 18 10:05:03 arch-server kernel: NR_IRQS:8448 nr_irqs:872 16
Mar 18 10:05:03 arch-server kernel: spurious 8259A interrupt: IRQ7.
Mar 18 10:05:03 arch-server kernel: Console: colour dummy device 80x25
Mar 18 10:05:03 arch-server kernel: console [tty0] enabled
Mar 18 10:05:03 arch-server kernel: allocated 66060288 bytes of page_cgroup
Mar 18 10:05:03 arch-server kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Mar 18 10:05:03 arch-server kernel: hpet clockevent registered
Mar 18 10:05:03 arch-server kernel: tsc: Fast TSC calibration using PIT
Mar 18 10:05:03 arch-server kernel: tsc: Detected 4199.946 MHz processor
Mar 18 10:05:03 arch-server kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 8399.89 BogoMIPS (lpj=41999460)
Mar 18 10:05:03 arch-server kernel: pid_max: default: 32768 minimum: 301
Mar 18 10:05:03 arch-server kernel: ACPI: Core revision 20131218
Mar 18 10:05:03 arch-server kernel: ACPI: All ACPI Tables successfully acquired
Mar 18 10:05:03 arch-server kernel: Security Framework initialized
Mar 18 10:05:03 arch-server kernel: Yama: becoming mindful.
Mar 18 10:05:03 arch-server kernel: Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mar 18 10:05:03 arch-server kernel: Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mar 18 10:05:03 arch-server kernel: Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mar 18 10:05:03 arch-server kernel: Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys memory
Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys devices
Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys freezer
Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys net_cls
Mar 18 10:05:03 arch-server kernel: Initializing cgroup subsys blkio
Mar 18 10:05:03 arch-server kernel: tseg: 0000000000
Mar 18 10:05:03 arch-server kernel: CPU: Physical Processor ID: 0
Mar 18 10:05:03 arch-server kernel: CPU: Processor Core ID: 0
Mar 18 10:05:03 arch-server kernel: mce: CPU supports 7 MCE banks
Mar 18 10:05:03 arch-server kernel: LVT offset 1 assigned for vector 0xf9
Mar 18 10:05:03 arch-server kernel: Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
tlb_flushall_shift: 6
Mar 18 10:05:03 arch-server kernel: Freeing SMP alternatives memory: 20K (ffffffff819f2000 - ffffffff819f7000)
Mar 18 10:05:03 arch-server kernel: ftrace: allocating 20141 entries in 79 pages
Mar 18 10:05:03 arch-server kernel: Switched APIC routing to physical flat.
Mar 18 10:05:03 arch-server kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Mar 18 10:05:03 arch-server kernel: smpboot: CPU0: AMD FX(tm)-4170 Quad-Core Processor (fam: 15, model: 01, stepping: 02)
Mar 18 10:05:03 arch-server kernel: Performance Events: Fam15h core perfctr, AMD PMU driver.
Mar 18 10:05:03 arch-server kernel: ... version: 0
Mar 18 10:05:03 arch-server kernel: ... bit width: 48
Mar 18 10:05:03 arch-server kernel: ... generic registers: 6
Mar 18 10:05:03 arch-server kernel: ... value mask: 0000ffffffffffff
Mar 18 10:05:03 arch-server kernel: ... max period: 00007fffffffffff
Mar 18 10:05:03 arch-server kernel: ... fixed-purpose events: 0
Mar 18 10:05:03 arch-server kernel: ... event mask: 000000000000003f
Mar 18 10:05:03 arch-server kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Mar 18 10:05:03 arch-server kernel: x86: Booting SMP configuration:
Mar 18 10:05:03 arch-server kernel: .... node #0, CPUs: #1 #2 #3
Mar 18 10:05:03 arch-server kernel: x86: Booted up 1 node, 4 CPUs
Mar 18 10:05:03 arch-server kernel: smpboot: Total of 4 processors activated (33599.56 BogoMIPS)
Mar 18 10:05:03 arch-server kernel: devtmpfs: initialized
Mar 18 10:05:03 arch-server kernel: PM: Registering ACPI NVS region [mem 0xcff9e000-0xcffdffff] (270336 bytes)
Mar 18 10:05:03 arch-server kernel: pinctrl core: initialized pinctrl subsystem
Mar 18 10:05:03 arch-server kernel: RTC time: 15:04:53, date: 03/18/15
Mar 18 10:05:03 arch-server kernel: NET: Registered protocol family 16
Mar 18 10:05:03 arch-server kernel: cpuidle: using governor ladder
Mar 18 10:05:03 arch-server kernel: cpuidle: using governor menu
Mar 18 10:05:03 arch-server kernel: ACPI: bus type PCI registered
Mar 18 10:05:03 arch-server kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Mar 18 10:05:03 arch-server kernel: PCI: not using MMCONFIG
Mar 18 10:05:03 arch-server kernel: PCI: Using configuration type 1 for base access
Mar 18 10:05:03 arch-server kernel: PCI: Using configuration type 1 for extended access
Mar 18 10:05:03 arch-server kernel: mtrr: your CPUs had inconsistent variable MTRR settings
Mar 18 10:05:03 arch-server kernel: mtrr: probably your BIOS does not setup all CPUs.
Mar 18 10:05:03 arch-server kernel: mtrr: corrected configuration.
Mar 18 10:05:03 arch-server kernel: bio: create slab <bio-0> at 0
Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Module Device)
Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Processor Device)
Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Mar 18 10:05:03 arch-server kernel: ACPI: Added _OSI(Processor Aggregator Device)
Mar 18 10:05:03 arch-server kernel: ACPI: Executed 4 blocks of module-level executable AML code
Mar 18 10:05:03 arch-server kernel: ACPI: Interpreter enabled
Mar 18 10:05:03 arch-server kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
Mar 18 10:05:03 arch-server kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131218/hwxface-580)
Mar 18 10:05:03 arch-server kernel: ACPI: (supports S0 S1 S4 S5)
Mar 18 10:05:03 arch-server kernel: ACPI: Using IOAPIC for interrupt routing
Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Mar 18 10:05:03 arch-server kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Mar 18 10:05:03 arch-server kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Mar 18 10:05:03 arch-server kernel: ACPI: No dock devices found.
Mar 18 10:05:03 arch-server kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Mar 18 10:05:03 arch-server kernel: acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
Mar 18 10:05:03 arch-server kernel: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
Mar 18 10:05:03 arch-server kernel: PCI host bridge to bus 0000:00
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
Mar 18 10:05:03 arch-server kernel: pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
Mar 18 10:05:03 arch-server kernel: pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
Mar 18 10:05:03 arch-server kernel: pci 0000:00:05.0: System wakeup disabled by ACPI
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: reg 0x24: [mem 0xfe9ffc00-0xfe9fffff]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:11.0: set SATA to AHCI mode
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: reg 0x10: [mem 0xfe9fe000-0xfe9fefff]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.0: System wakeup disabled by ACPI
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: reg 0x10: [mem 0xfe9fd000-0xfe9fdfff]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.1: System wakeup disabled by ACPI
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: reg 0x10: [mem 0xfe9ff800-0xfe9ff8ff]
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: supports D1 D2
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
Mar 18 10:05:03 arch-server kernel: pci 0000:00:12.2: System wakeup disabled by ACPI
Mar 18 10:05:03 arch-server kernel: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
Mar 18 10:05:03 arch-server kernel: pci 0000:00:13.0: reg 0x10: [mem 0xfe9fc000-0xfe9fcfff]
Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.0: System wakeup disabled by ACPI
Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: reg 0x10: [mem 0xfe9fb000-0xfe9fbfff]
Mar 18 10:05:04 arch-server kernel: pci 0000:00:13.1: System wakeup disabled by ACP -
Black screen mirroring after ATV update
hi, I need help, I just bought my ATV, and it mirrored my IPad just fine, then it asked me to update the ATV software, now it just give me sound but no mirror??? Only a black screen. Help please!
I have the same problem. After restarting the iPad, mirroring will work for 2 or 3 times and then after that I get a black screen on the TV.
It is not a router issue because my iPhone and MCP all work fine sending to ATV repeatedly. It's just the iPad that is having this issue, the one place I really need the capability.
I've tried everything suggested on other threads with this topic. The only thing that works is rebooting the iPad, but the problem crops up after 2-3 uses. I really need to be able to turn mirroring on/off repeatedly like I can on other devices. -
PC fails to reboot and shows blank screen after automatic windows updates including SP
Pavilion- a1130n" WINXP ProfessionalC fails to reboot and shows blank screen after automatic install ing windows updates including SP 3
I would love to say that a refresh worked for me however it did not.It takes about 30 Minutes total I was able to trace part of the issue to a Registry Key that was tagging the processor. Because my BIOS manages its own temp gauge and windows is trying to
build on in I had to turn the BIOS one off as well as for some reason I get better funtionality with Visualization off.
I am still dealing with a lag but I was able to get ride of the freeze that made the computer completely useless. -
How to back up a MBA (black screen issue after update)?
Hi,
in an other post, it was suggested that
"There are ways to back up a computer that isn't fully functional — ask if you need guidance."
I would very much like to know how to do that!
This is a 2013 MBA that has been acting up since the last update, I am able to enter into safe mode and repair the disk, that's it. Other than that I get a black screen.
My data was not saved on Time Machine, I relied on dropbox and the auto save options of Scrivener the software I use, and it's been acting up lately. So i really need to get my files back.
Thanks for your help!online over the phone hardware diagnosis isnt the most foolproof method , obviously.
Even for people who used to fix laptops for years. Such is the case.
Importantly you got your data back. NOW, never go without LESS than 2 copies of your data OFF the computer
read here:
Methodology to protect your data. Backups vs. Archives. Long-term data protection -
[SOLVED] GNOME starts into black screen, crashing after a minute.
This is happening after recently upgrading GNOME to 3.8 from 3.6. I attempted to downgrade, but it still refuses to start.
Here's the Xorg log.
[ 3050.246]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 3050.246] X Protocol Version 11, Revision 0
[ 3050.246] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 3050.246] Current Operating System: Linux dash 3.10.2-1-ARCH #1 SMP PREEMPT Mon Jul 22 08:47:24 CEST 2013 x86_64
[ 3050.246] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=5acc63bb-de83-4282-bc5e-f89b0c21e8be ro quiet
[ 3050.246] Build Date: 01 July 2013 10:48:42AM
[ 3050.246]
[ 3050.246] Current version of pixman: 0.30.0
[ 3050.247] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3050.247] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3050.247] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 28 14:09:23 2013
[ 3050.247] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3050.247] (==) No Layout section. Using the first Screen section.
[ 3050.247] (==) No screen section available. Using defaults.
[ 3050.247] (**) |-->Screen "Default Screen Section" (0)
[ 3050.247] (**) | |-->Monitor "<default monitor>"
[ 3050.247] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3050.247] (==) Automatically adding devices
[ 3050.247] (==) Automatically enabling devices
[ 3050.247] (==) Automatically adding GPU devices
[ 3050.247] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3050.247] Entry deleted from font path.
[ 3050.247] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3050.247] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3050.247] Entry deleted from font path.
[ 3050.247] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3050.247] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 3050.247] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3050.247] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3050.247] (II) Loader magic: 0x7fdc20
[ 3050.247] (II) Module ABI versions:
[ 3050.247] X.Org ANSI C Emulation: 0.4
[ 3050.247] X.Org Video Driver: 14.1
[ 3050.247] X.Org XInput driver : 19.1
[ 3050.247] X.Org Server Extension : 7.0
[ 3050.248] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3050.250] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21db rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[ 3050.250] Initializing built-in extension Generic Event Extension
[ 3050.250] Initializing built-in extension SHAPE
[ 3050.250] Initializing built-in extension MIT-SHM
[ 3050.250] Initializing built-in extension XInputExtension
[ 3050.250] Initializing built-in extension XTEST
[ 3050.250] Initializing built-in extension BIG-REQUESTS
[ 3050.250] Initializing built-in extension SYNC
[ 3050.250] Initializing built-in extension XKEYBOARD
[ 3050.250] Initializing built-in extension XC-MISC
[ 3050.250] Initializing built-in extension SECURITY
[ 3050.250] Initializing built-in extension XINERAMA
[ 3050.250] Initializing built-in extension XFIXES
[ 3050.250] Initializing built-in extension RENDER
[ 3050.250] Initializing built-in extension RANDR
[ 3050.250] Initializing built-in extension COMPOSITE
[ 3050.250] Initializing built-in extension DAMAGE
[ 3050.250] Initializing built-in extension MIT-SCREEN-SAVER
[ 3050.250] Initializing built-in extension DOUBLE-BUFFER
[ 3050.250] Initializing built-in extension RECORD
[ 3050.250] Initializing built-in extension DPMS
[ 3050.250] Initializing built-in extension X-Resource
[ 3050.250] Initializing built-in extension XVideo
[ 3050.251] Initializing built-in extension XVideo-MotionCompensation
[ 3050.252] Initializing built-in extension XFree86-VidModeExtension
[ 3050.253] Initializing built-in extension XFree86-DGA
[ 3050.253] Initializing built-in extension XFree86-DRI
[ 3050.254] Initializing built-in extension DRI2
[ 3050.254] (II) LoadModule: "glx"
[ 3050.254] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3050.254] (II) Module glx: vendor="X.Org Foundation"
[ 3050.254] compiled for 1.14.2, module version = 1.0.0
[ 3050.254] ABI class: X.Org Server Extension, version 7.0
[ 3050.254] (==) AIGLX enabled
[ 3050.255] Loading extension GLX
[ 3050.255] (==) Matched intel as autoconfigured driver 0
[ 3050.255] (==) Matched intel as autoconfigured driver 1
[ 3050.255] (==) Matched vesa as autoconfigured driver 2
[ 3050.255] (==) Matched modesetting as autoconfigured driver 3
[ 3050.255] (==) Matched fbdev as autoconfigured driver 4
[ 3050.255] (==) Assigned the driver to the xf86ConfigLayout
[ 3050.255] (II) LoadModule: "intel"
[ 3050.255] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 3050.255] (II) Module intel: vendor="X.Org Foundation"
[ 3050.255] compiled for 1.14.2, module version = 2.21.12
[ 3050.255] Module class: X.Org Video Driver
[ 3050.255] ABI class: X.Org Video Driver, version 14.1
[ 3050.255] (II) LoadModule: "vesa"
[ 3050.256] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 3050.256] (II) Module vesa: vendor="X.Org Foundation"
[ 3050.256] compiled for 1.14.0, module version = 2.3.2
[ 3050.256] Module class: X.Org Video Driver
[ 3050.256] ABI class: X.Org Video Driver, version 14.1
[ 3050.256] (II) LoadModule: "modesetting"
[ 3050.256] (WW) Warning, couldn't open module modesetting
[ 3050.256] (II) UnloadModule: "modesetting"
[ 3050.256] (II) Unloading modesetting
[ 3050.256] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 3050.256] (II) LoadModule: "fbdev"
[ 3050.256] (WW) Warning, couldn't open module fbdev
[ 3050.256] (II) UnloadModule: "fbdev"
[ 3050.256] (II) Unloading fbdev
[ 3050.256] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3050.256] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 3050.257] (II) VESA: driver for VESA chipsets: vesa
[ 3050.257] (++) using VT number 3
[ 3050.257] (WW) Falling back to old probe method for vesa
[ 3050.257] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3050.257] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 3050.257] (==) intel(0): RGB weight 888
[ 3050.257] (==) intel(0): Default visual is TrueColor
[ 3050.257] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 3050.257] (**) intel(0): Relaxed fencing enabled
[ 3050.257] (**) intel(0): Wait on SwapBuffers? enabled
[ 3050.257] (**) intel(0): Triple buffering? enabled
[ 3050.257] (**) intel(0): Framebuffer tiled
[ 3050.257] (**) intel(0): Pixmaps tiled
[ 3050.257] (**) intel(0): 3D buffers tiled
[ 3050.257] (**) intel(0): SwapBuffers wait enabled
[ 3050.257] (==) intel(0): video overlay key set to 0x101fe
[ 3050.257] (II) intel(0): Output LVDS1 has no monitor section
[ 3050.257] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 3050.259] (II) intel(0): Output VGA1 has no monitor section
[ 3050.283] (II) intel(0): Output HDMI1 has no monitor section
[ 3050.283] (II) intel(0): Output DP1 has no monitor section
[ 3050.283] (II) intel(0): Output HDMI2 has no monitor section
[ 3050.283] (II) intel(0): Output HDMI3 has no monitor section
[ 3050.284] (II) intel(0): Output DP2 has no monitor section
[ 3050.284] (II) intel(0): Output DP3 has no monitor section
[ 3050.284] (II) intel(0): EDID for output LVDS1
[ 3050.284] (II) intel(0): Manufacturer: LGD Model: 2d8 Serial#: 0
[ 3050.284] (II) intel(0): Year: 2012 Week: 0
[ 3050.284] (II) intel(0): EDID Version: 1.3
[ 3050.284] (II) intel(0): Digital Display Input
[ 3050.284] (II) intel(0): Max Image Size [cm]: horiz.: 28 vert.: 16
[ 3050.284] (II) intel(0): Gamma: 2.20
[ 3050.284] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 3050.284] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3050.284] (II) intel(0): First detailed timing is preferred mode
[ 3050.284] (II) intel(0): redX: 0.600 redY: 0.355 greenX: 0.334 greenY: 0.559
[ 3050.284] (II) intel(0): blueX: 0.149 blueY: 0.114 whiteX: 0.313 whiteY: 0.329
[ 3050.284] (II) intel(0): Manufacturer's mask: 0
[ 3050.284] (II) intel(0): Supported detailed timing:
[ 3050.284] (II) intel(0): clock: 75.2 MHz Image Size: 277 x 156 mm
[ 3050.284] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1478 h_blank_end 1582 h_border: 0
[ 3050.284] (II) intel(0): v_active: 768 v_sync: 772 v_sync_end 779 v_blanking: 792 v_border: 0
[ 3050.284] (II) intel(0): LG Display
[ 3050.284] (II) intel(0): LP125WH2-SLB3
[ 3050.284] (II) intel(0): EDID (in hex):
[ 3050.284] (II) intel(0): 00ffffffffffff0030e4d80200000000
[ 3050.284] (II) intel(0): 00160103801c1078ea8855995b558f26
[ 3050.284] (II) intel(0): 1d505400000001010101010101010101
[ 3050.284] (II) intel(0): 010101010101601d56d8500018303040
[ 3050.284] (II) intel(0): 4700159c1000001b0000000000000000
[ 3050.284] (II) intel(0): 00000000000000000000000000fe004c
[ 3050.284] (II) intel(0): 4720446973706c61790a2020000000fe
[ 3050.284] (II) intel(0): 004c503132355748322d534c42330059
[ 3050.284] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Printing probed modes for output LVDS1
[ 3050.284] (II) intel(0): Modeline "1366x768"x60.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 3050.284] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 3050.284] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 3050.284] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 3050.284] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 3050.285] (II) intel(0): EDID for output VGA1
[ 3050.309] (II) intel(0): EDID for output HDMI1
[ 3050.309] (II) intel(0): EDID for output DP1
[ 3050.310] (II) intel(0): EDID for output HDMI2
[ 3050.310] (II) intel(0): EDID for output HDMI3
[ 3050.310] (II) intel(0): EDID for output DP2
[ 3050.310] (II) intel(0): EDID for output DP3
[ 3050.310] (II) intel(0): Output LVDS1 connected
[ 3050.310] (II) intel(0): Output VGA1 disconnected
[ 3050.310] (II) intel(0): Output HDMI1 disconnected
[ 3050.310] (II) intel(0): Output DP1 disconnected
[ 3050.310] (II) intel(0): Output HDMI2 disconnected
[ 3050.310] (II) intel(0): Output HDMI3 disconnected
[ 3050.310] (II) intel(0): Output DP2 disconnected
[ 3050.310] (II) intel(0): Output DP3 disconnected
[ 3050.310] (II) intel(0): Using exact sizes for initial modes
[ 3050.310] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 3050.310] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 3050.310] (II) intel(0): Kernel page flipping support detected, enabling
[ 3050.310] (==) intel(0): DPI set to (96, 96)
[ 3050.310] (II) Loading sub module "fb"
[ 3050.310] (II) LoadModule: "fb"
[ 3050.310] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3050.310] (II) Module fb: vendor="X.Org Foundation"
[ 3050.310] compiled for 1.14.2, module version = 1.0.0
[ 3050.310] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3050.310] (II) Loading sub module "dri2"
[ 3050.310] (II) LoadModule: "dri2"
[ 3050.310] (II) Module "dri2" already built-in
[ 3050.310] (II) UnloadModule: "vesa"
[ 3050.310] (II) Unloading vesa
[ 3050.310] (==) Depth 24 pixmap format is 32 bpp
[ 3050.310] (II) intel(0): [DRI2] Setup complete
[ 3050.310] (II) intel(0): [DRI2] DRI driver: i965
[ 3050.310] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 3050.311] (II) UXA(0): Driver registered support for the following operations:
[ 3050.311] (II) solid
[ 3050.311] (II) copy
[ 3050.311] (II) composite (RENDER acceleration)
[ 3050.311] (II) put_image
[ 3050.311] (II) get_image
[ 3050.311] (==) intel(0): Backing store disabled
[ 3050.311] (==) intel(0): Silken mouse enabled
[ 3050.311] (II) intel(0): Initializing HW Cursor
[ 3050.311] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3050.312] (==) intel(0): DPMS enabled
[ 3050.312] (==) intel(0): Intel XvMC decoder enabled
[ 3050.312] (II) intel(0): Set up textured video
[ 3050.312] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 3050.312] (II) intel(0): direct rendering: DRI2 Enabled
[ 3050.312] (==) intel(0): hotplug detection: "enabled"
[ 3050.336] (--) RandR disabled
[ 3050.346] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 3050.346] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 3050.346] (II) AIGLX: enabled GLX_ARB_create_context
[ 3050.346] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 3050.346] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 3050.346] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 3050.346] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 3050.346] (II) AIGLX: Loaded and initialized i965
[ 3050.346] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3050.346] (II) intel(0): Setting screen physical size to 361 x 203
[ 3050.373] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 3050.373] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3050.373] (II) LoadModule: "evdev"
[ 3050.373] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3050.373] (II) Module evdev: vendor="X.Org Foundation"
[ 3050.373] compiled for 1.14.2, module version = 2.8.1
[ 3050.373] Module class: X.Org XInput Driver
[ 3050.373] ABI class: X.Org XInput driver, version 19.1
[ 3050.373] (II) Using input driver 'evdev' for 'Power Button'
[ 3050.373] (**) Power Button: always reports core events
[ 3050.373] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 3050.373] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3050.373] (--) evdev: Power Button: Found keys
[ 3050.373] (II) evdev: Power Button: Configuring as keyboard
[ 3050.373] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 3050.373] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3050.373] (**) Option "xkb_rules" "evdev"
[ 3050.373] (**) Option "xkb_model" "pc104"
[ 3050.373] (**) Option "xkb_layout" "us"
[ 3050.389] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 3050.389] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3050.389] (II) Using input driver 'evdev' for 'Video Bus'
[ 3050.389] (**) Video Bus: always reports core events
[ 3050.389] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 3050.389] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3050.389] (--) evdev: Video Bus: Found keys
[ 3050.389] (II) evdev: Video Bus: Configuring as keyboard
[ 3050.389] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 3050.389] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 3050.389] (**) Option "xkb_rules" "evdev"
[ 3050.389] (**) Option "xkb_model" "pc104"
[ 3050.389] (**) Option "xkb_layout" "us"
[ 3050.390] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 3050.390] (II) No input driver specified, ignoring this device.
[ 3050.390] (II) This device may have been added with another device file.
[ 3050.390] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 3050.390] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 3050.390] (II) Using input driver 'evdev' for 'Sleep Button'
[ 3050.390] (**) Sleep Button: always reports core events
[ 3050.390] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 3050.390] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 3050.390] (--) evdev: Sleep Button: Found keys
[ 3050.390] (II) evdev: Sleep Button: Configuring as keyboard
[ 3050.390] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 3050.390] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 3050.390] (**) Option "xkb_rules" "evdev"
[ 3050.390] (**) Option "xkb_model" "pc104"
[ 3050.390] (**) Option "xkb_layout" "us"
[ 3050.390] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 3050.390] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 3050.390] (II) No input driver specified, ignoring this device.
[ 3050.390] (II) This device may have been added with another device file.
[ 3050.390] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 3050.390] (II) No input driver specified, ignoring this device.
[ 3050.390] (II) This device may have been added with another device file.
[ 3050.391] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event8)
[ 3050.391] (II) No input driver specified, ignoring this device.
[ 3050.391] (II) This device may have been added with another device file.
[ 3050.391] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9)
[ 3050.391] (II) No input driver specified, ignoring this device.
[ 3050.391] (II) This device may have been added with another device file.
[ 3050.391] (II) config/udev: Adding input device Wacom ISDv4 E6 Pen (/dev/input/event12)
[ 3050.391] (**) Wacom ISDv4 E6 Pen: Applying InputClass "evdev tablet catchall"
[ 3050.391] (II) Using input driver 'evdev' for 'Wacom ISDv4 E6 Pen'
[ 3050.391] (**) Wacom ISDv4 E6 Pen: always reports core events
[ 3050.391] (**) evdev: Wacom ISDv4 E6 Pen: Device: "/dev/input/event12"
[ 3050.391] (--) evdev: Wacom ISDv4 E6 Pen: Vendor 0x56a Product 0xe6
[ 3050.391] (--) evdev: Wacom ISDv4 E6 Pen: Found absolute axes
[ 3050.391] (--) evdev: Wacom ISDv4 E6 Pen: Found x and y absolute axes
[ 3050.391] (--) evdev: Wacom ISDv4 E6 Pen: Found absolute tablet.
[ 3050.391] (II) evdev: Wacom ISDv4 E6 Pen: Configuring as tablet
[ 3050.391] (**) evdev: Wacom ISDv4 E6 Pen: YAxisMapping: buttons 4 and 5
[ 3050.391] (**) evdev: Wacom ISDv4 E6 Pen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3050.391] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input12/event12"
[ 3050.391] (II) XINPUT: Adding extended input device "Wacom ISDv4 E6 Pen" (type: TABLET, id 9)
[ 3050.391] (II) evdev: Wacom ISDv4 E6 Pen: initialized for absolute axes.
[ 3050.391] (**) Wacom ISDv4 E6 Pen: (accel) keeping acceleration scheme 1
[ 3050.391] (**) Wacom ISDv4 E6 Pen: (accel) acceleration profile 0
[ 3050.391] (**) Wacom ISDv4 E6 Pen: (accel) acceleration factor: 2.000
[ 3050.391] (**) Wacom ISDv4 E6 Pen: (accel) acceleration threshold: 4
[ 3050.391] (II) config/udev: Adding input device Wacom ISDv4 E6 Pen (/dev/input/mouse1)
[ 3050.391] (II) No input driver specified, ignoring this device.
[ 3050.391] (II) This device may have been added with another device file.
[ 3050.392] (II) config/udev: Adding input device Wacom ISDv4 E6 Finger (/dev/input/event13)
[ 3050.392] (**) Wacom ISDv4 E6 Finger: Applying InputClass "evdev touchscreen catchall"
[ 3050.392] (II) Using input driver 'evdev' for 'Wacom ISDv4 E6 Finger'
[ 3050.392] (**) Wacom ISDv4 E6 Finger: always reports core events
[ 3050.392] (**) evdev: Wacom ISDv4 E6 Finger: Device: "/dev/input/event13"
[ 3050.392] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
[ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Vendor 0x56a Product 0xe6
[ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute axes
[ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute multitouch axes
[ 3050.392] (II) evdev: Wacom ISDv4 E6 Finger: No buttons found, faking one.
[ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Found x and y absolute axes
[ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute touchscreen
[ 3050.392] (II) evdev: Wacom ISDv4 E6 Finger: Configuring as touchscreen
[ 3050.392] (**) evdev: Wacom ISDv4 E6 Finger: YAxisMapping: buttons 4 and 5
[ 3050.392] (**) evdev: Wacom ISDv4 E6 Finger: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3050.392] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input13/event13"
[ 3050.392] (II) XINPUT: Adding extended input device "Wacom ISDv4 E6 Finger" (type: TOUCHSCREEN, id 10)
[ 3050.392] (II) evdev: Wacom ISDv4 E6 Finger: initialized for absolute axes.
[ 3050.392] (**) Wacom ISDv4 E6 Finger: (accel) keeping acceleration scheme 1
[ 3050.392] (**) Wacom ISDv4 E6 Finger: (accel) acceleration profile 0
[ 3050.392] (**) Wacom ISDv4 E6 Finger: (accel) acceleration factor: 2.000
[ 3050.392] (**) Wacom ISDv4 E6 Finger: (accel) acceleration threshold: 4
[ 3050.392] (II) config/udev: Adding input device Wacom ISDv4 E6 Finger (/dev/input/mouse2)
[ 3050.392] (II) No input driver specified, ignoring this device.
[ 3050.392] (II) This device may have been added with another device file.
[ 3050.392] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 3050.392] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3050.392] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 3050.392] (**) AT Translated Set 2 keyboard: always reports core events
[ 3050.392] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3050.392] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 3050.392] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 3050.392] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 3050.392] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 3050.392] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 3050.392] (**) Option "xkb_rules" "evdev"
[ 3050.392] (**) Option "xkb_model" "pc104"
[ 3050.392] (**) Option "xkb_layout" "us"
[ 3050.393] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 3050.393] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3050.393] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3050.393] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 3050.393] (II) LoadModule: "synaptics"
[ 3050.393] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 3050.393] (II) Module synaptics: vendor="X.Org Foundation"
[ 3050.393] compiled for 1.14.1, module version = 1.7.1
[ 3050.393] Module class: X.Org XInput Driver
[ 3050.393] ABI class: X.Org XInput driver, version 19.1
[ 3050.393] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 3050.393] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3050.393] (**) Option "Device" "/dev/input/event11"
[ 3050.483] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 75)
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 129)
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 3050.483] (**) Option "TapButton1" "1"
[ 3050.483] (**) Option "TapButton2" "2"
[ 3050.483] (**) Option "TapButton3" "3"
[ 3050.483] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3050.483] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3050.523] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 3050.523] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 3050.523] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 3050.523] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 3050.523] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 3050.523] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3050.523] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 3050.523] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3050.523] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3050.523] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3050.523] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3050.523] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 3050.523] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event14)
[ 3050.524] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 3050.524] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 3050.524] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 3050.524] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event14"
[ 3050.524] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 3050.524] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 3050.524] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 3050.524] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 3050.524] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 3050.524] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 3050.524] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3050.524] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input14/event14"
[ 3050.524] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
[ 3050.524] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 3050.524] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 3050.524] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 3050.524] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 3050.524] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 3050.524] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
[ 3050.524] (II) No input driver specified, ignoring this device.
[ 3050.524] (II) This device may have been added with another device file.
[ 3050.524] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 3050.524] (II) No input driver specified, ignoring this device.
[ 3050.524] (II) This device may have been added with another device file.
[ 3050.524] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 3050.524] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 3050.524] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 3050.524] (**) ThinkPad Extra Buttons: always reports core events
[ 3050.524] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 3050.524] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 3050.524] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 3050.524] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 3050.524] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
[ 3050.524] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
[ 3050.524] (**) Option "xkb_rules" "evdev"
[ 3050.524] (**) Option "xkb_model" "pc104"
[ 3050.524] (**) Option "xkb_layout" "us"
[ 3050.673] (II) intel(0): EDID vendor "LGD", prod id 728
[ 3050.673] (II) intel(0): Printing DDC gathered Modelines:
[ 3050.673] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 3053.746] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 3057.566] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 3057.576] (II) intel(0): EDID vendor "LGD", prod id 728
[ 3057.576] (II) intel(0): Printing DDC gathered Modelines:
[ 3057.576] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 3057.604] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
[ 3057.604] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3057.604] setversion 1.4 failed
[ 3059.233] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 3145.715] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 3145.719] (II) intel(0): EDID vendor "LGD", prod id 728
[ 3145.719] (II) intel(0): Printing DDC gathered Modelines:
[ 3145.719] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 3145.747] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
[ 3145.747] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3148.360] (II) evdev: ThinkPad Extra Buttons: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: TPPS/2 IBM TrackPoint: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) UnloadModule: "synaptics"
[ 3148.360] (II) evdev: AT Translated Set 2 keyboard: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: Wacom ISDv4 E6 Finger: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: Wacom ISDv4 E6 Pen: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: Sleep Button: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: Video Bus: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: Power Button: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3149.198] (EE) Server terminated successfully (0). Closing log file.
I'd appreciate any help I could get.
Last edited by erdi13 (2013-07-30 03:49:12)I tried entering GNOME with gdm.
Before gdm runs, it freezes at a black screen for about a minute, then flashes the "Oh No" screen. Afterward, it allows me to login. After logging in, it freezes on the grey background of gdm for another minute. Once it displays the "Oh No" screen, it takes me back to a black screen, repeating the cycle.
Also, I upgraded X11 at the same time as GNOME.
Edit: Here's a recent Xorg log, if it helps.
[ 23.867]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 23.868] X Protocol Version 11, Revision 0
[ 23.868] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 23.869] Current Operating System: Linux dash 3.10.2-1-ARCH #1 SMP PREEMPT Mon Jul 22 08:47:24 CEST 2013 x86_64
[ 23.869] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=5acc63bb-de83-4282-bc5e-f89b0c21e8be ro quiet
[ 23.870] Build Date: 01 July 2013 10:48:42AM
[ 23.870]
[ 23.871] Current version of pixman: 0.30.0
[ 23.872] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 23.872] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23.874] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 29 16:06:24 2013
[ 23.876] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 23.878] (==) No Layout section. Using the first Screen section.
[ 23.878] (==) No screen section available. Using defaults.
[ 23.878] (**) |-->Screen "Default Screen Section" (0)
[ 23.878] (**) | |-->Monitor "<default monitor>"
[ 23.878] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 23.878] (**) | |-->Device "Intel Graphics"
[ 23.878] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 23.878] (==) Automatically adding devices
[ 23.878] (==) Automatically enabling devices
[ 23.878] (==) Automatically adding GPU devices
[ 23.885] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 23.886] Entry deleted from font path.
[ 23.886] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 23.886] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 23.886] Entry deleted from font path.
[ 23.886] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 23.886] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 23.886] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 23.886] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.886] (II) Loader magic: 0x7fdc20
[ 23.886] (II) Module ABI versions:
[ 23.886] X.Org ANSI C Emulation: 0.4
[ 23.886] X.Org Video Driver: 14.1
[ 23.886] X.Org XInput driver : 19.1
[ 23.886] X.Org Server Extension : 7.0
[ 23.886] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 23.888] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21db rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[ 23.889] Initializing built-in extension Generic Event Extension
[ 23.890] Initializing built-in extension SHAPE
[ 23.890] Initializing built-in extension MIT-SHM
[ 23.891] Initializing built-in extension XInputExtension
[ 23.891] Initializing built-in extension XTEST
[ 23.892] Initializing built-in extension BIG-REQUESTS
[ 23.893] Initializing built-in extension SYNC
[ 23.893] Initializing built-in extension XKEYBOARD
[ 23.894] Initializing built-in extension XC-MISC
[ 23.895] Initializing built-in extension SECURITY
[ 23.895] Initializing built-in extension XINERAMA
[ 23.896] Initializing built-in extension XFIXES
[ 23.896] Initializing built-in extension RENDER
[ 23.897] Initializing built-in extension RANDR
[ 23.897] Initializing built-in extension COMPOSITE
[ 23.898] Initializing built-in extension DAMAGE
[ 23.899] Initializing built-in extension MIT-SCREEN-SAVER
[ 23.899] Initializing built-in extension DOUBLE-BUFFER
[ 23.900] Initializing built-in extension RECORD
[ 23.900] Initializing built-in extension DPMS
[ 23.901] Initializing built-in extension X-Resource
[ 23.901] Initializing built-in extension XVideo
[ 23.902] Initializing built-in extension XVideo-MotionCompensation
[ 23.903] Initializing built-in extension XFree86-VidModeExtension
[ 23.903] Initializing built-in extension XFree86-DGA
[ 23.904] Initializing built-in extension XFree86-DRI
[ 23.904] Initializing built-in extension DRI2
[ 23.904] (II) LoadModule: "glx"
[ 23.905] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.909] (II) Module glx: vendor="X.Org Foundation"
[ 23.909] compiled for 1.14.2, module version = 1.0.0
[ 23.909] ABI class: X.Org Server Extension, version 7.0
[ 23.909] (==) AIGLX enabled
[ 23.910] Loading extension GLX
[ 23.910] (II) LoadModule: "intel"
[ 23.910] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.916] (II) Module intel: vendor="X.Org Foundation"
[ 23.916] compiled for 1.14.2, module version = 2.21.12
[ 23.916] Module class: X.Org Video Driver
[ 23.916] ABI class: X.Org Video Driver, version 14.1
[ 23.916] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 23.917] (++) using VT number 1
[ 23.920] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 23.920] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 23.920] (==) intel(0): RGB weight 888
[ 23.920] (==) intel(0): Default visual is TrueColor
[ 23.920] (**) intel(0): Option "AccelMethod" "sna"
[ 23.920] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 23.920] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 23.920] (**) intel(0): Framebuffer tiled
[ 23.920] (**) intel(0): Pixmaps tiled
[ 23.920] (**) intel(0): "Tear free" disabled
[ 23.920] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 23.920] (II) intel(0): Output LVDS1 has no monitor section
[ 23.920] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 23.920] (II) intel(0): Output VGA1 has no monitor section
[ 23.920] (II) intel(0): Output HDMI1 has no monitor section
[ 23.920] (II) intel(0): Output DP1 has no monitor section
[ 23.920] (II) intel(0): Output HDMI2 has no monitor section
[ 23.920] (II) intel(0): Output HDMI3 has no monitor section
[ 23.920] (II) intel(0): Output DP2 has no monitor section
[ 23.920] (II) intel(0): Output DP3 has no monitor section
[ 23.920] (II) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 23.920] (==) intel(0): DPI set to (96, 96)
[ 23.920] (II) Loading sub module "dri2"
[ 23.920] (II) LoadModule: "dri2"
[ 23.920] (II) Module "dri2" already built-in
[ 23.920] (==) Depth 24 pixmap format is 32 bpp
[ 23.926] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[ 23.926] (==) intel(0): Backing store disabled
[ 23.926] (==) intel(0): Silken mouse enabled
[ 23.926] (II) intel(0): HW Cursor enabled
[ 23.926] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 23.928] (==) intel(0): DPMS enabled
[ 23.928] (II) intel(0): [DRI2] Setup complete
[ 23.928] (II) intel(0): [DRI2] DRI driver: i965
[ 23.928] (II) intel(0): direct rendering: DRI2 Enabled
[ 23.928] (==) intel(0): hotplug detection: "enabled"
[ 23.929] (--) RandR disabled
[ 23.956] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 23.956] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 23.956] (II) AIGLX: enabled GLX_ARB_create_context
[ 23.956] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 23.956] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 23.956] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 23.956] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 23.956] (II) AIGLX: Loaded and initialized i965
[ 23.956] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 23.958] (II) intel(0): switch to mode 1366x768 on pipe 0 using LVDS1
[ 23.980] (II) intel(0): Setting screen physical size to 361 x 203
[ 24.028] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 24.028] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.028] (II) LoadModule: "evdev"
[ 24.028] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.031] (II) Module evdev: vendor="X.Org Foundation"
[ 24.031] compiled for 1.14.2, module version = 2.8.1
[ 24.031] Module class: X.Org XInput Driver
[ 24.031] ABI class: X.Org XInput driver, version 19.1
[ 24.031] (II) Using input driver 'evdev' for 'Power Button'
[ 24.031] (**) Power Button: always reports core events
[ 24.031] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 24.031] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 24.031] (--) evdev: Power Button: Found keys
[ 24.031] (II) evdev: Power Button: Configuring as keyboard
[ 24.031] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 24.031] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 24.031] (**) Option "xkb_rules" "evdev"
[ 24.031] (**) Option "xkb_model" "pc104"
[ 24.031] (**) Option "xkb_layout" "us"
[ 24.045] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 24.045] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 24.045] (II) Using input driver 'evdev' for 'Video Bus'
[ 24.045] (**) Video Bus: always reports core events
[ 24.045] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 24.045] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 24.045] (--) evdev: Video Bus: Found keys
[ 24.045] (II) evdev: Video Bus: Configuring as keyboard
[ 24.045] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 24.045] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 24.045] (**) Option "xkb_rules" "evdev"
[ 24.045] (**) Option "xkb_model" "pc104"
[ 24.045] (**) Option "xkb_layout" "us"
[ 24.046] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 24.046] (II) No input driver specified, ignoring this device.
[ 24.046] (II) This device may have been added with another device file.
[ 24.046] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 24.046] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 24.046] (II) Using input driver 'evdev' for 'Sleep Button'
[ 24.046] (**) Sleep Button: always reports core events
[ 24.046] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 24.046] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 24.046] (--) evdev: Sleep Button: Found keys
[ 24.046] (II) evdev: Sleep Button: Configuring as keyboard
[ 24.046] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 24.046] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 24.046] (**) Option "xkb_rules" "evdev"
[ 24.046] (**) Option "xkb_model" "pc104"
[ 24.046] (**) Option "xkb_layout" "us"
[ 24.046] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 24.046] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 24.046] (II) No input driver specified, ignoring this device.
[ 24.046] (II) This device may have been added with another device file.
[ 24.046] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 24.046] (II) No input driver specified, ignoring this device.
[ 24.046] (II) This device may have been added with another device file.
[ 24.047] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event8)
[ 24.047] (II) No input driver specified, ignoring this device.
[ 24.047] (II) This device may have been added with another device file.
[ 24.047] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9)
[ 24.047] (II) No input driver specified, ignoring this device.
[ 24.047] (II) This device may have been added with another device file.
[ 24.047] (II) config/udev: Adding input device Wacom ISDv4 E6 Pen (/dev/input/event12)
[ 24.047] (**) Wacom ISDv4 E6 Pen: Applying InputClass "evdev tablet catchall"
[ 24.047] (II) Using input driver 'evdev' for 'Wacom ISDv4 E6 Pen'
[ 24.047] (**) Wacom ISDv4 E6 Pen: always reports core events
[ 24.047] (**) evdev: Wacom ISDv4 E6 Pen: Device: "/dev/input/event12"
[ 24.047] (--) evdev: Wacom ISDv4 E6 Pen: Vendor 0x56a Product 0xe6
[ 24.047] (--) evdev: Wacom ISDv4 E6 Pen: Found absolute axes
[ 24.047] (--) evdev: Wacom ISDv4 E6 Pen: Found x and y absolute axes
[ 24.047] (--) evdev: Wacom ISDv4 E6 Pen: Found absolute tablet.
[ 24.047] (II) evdev: Wacom ISDv4 E6 Pen: Configuring as tablet
[ 24.047] (**) evdev: Wacom ISDv4 E6 Pen: YAxisMapping: buttons 4 and 5
[ 24.047] (**) evdev: Wacom ISDv4 E6 Pen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.047] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input12/event12"
[ 24.047] (II) XINPUT: Adding extended input device "Wacom ISDv4 E6 Pen" (type: TABLET, id 9)
[ 24.047] (II) evdev: Wacom ISDv4 E6 Pen: initialized for absolute axes.
[ 24.047] (**) Wacom ISDv4 E6 Pen: (accel) keeping acceleration scheme 1
[ 24.047] (**) Wacom ISDv4 E6 Pen: (accel) acceleration profile 0
[ 24.047] (**) Wacom ISDv4 E6 Pen: (accel) acceleration factor: 2.000
[ 24.047] (**) Wacom ISDv4 E6 Pen: (accel) acceleration threshold: 4
[ 24.047] (II) config/udev: Adding input device Wacom ISDv4 E6 Pen (/dev/input/mouse1)
[ 24.047] (II) No input driver specified, ignoring this device.
[ 24.047] (II) This device may have been added with another device file.
[ 24.047] (II) config/udev: Adding input device Wacom ISDv4 E6 Finger (/dev/input/event13)
[ 24.047] (**) Wacom ISDv4 E6 Finger: Applying InputClass "evdev touchscreen catchall"
[ 24.047] (II) Using input driver 'evdev' for 'Wacom ISDv4 E6 Finger'
[ 24.047] (**) Wacom ISDv4 E6 Finger: always reports core events
[ 24.047] (**) evdev: Wacom ISDv4 E6 Finger: Device: "/dev/input/event13"
[ 24.047] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
[ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Vendor 0x56a Product 0xe6
[ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute axes
[ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute multitouch axes
[ 24.047] (II) evdev: Wacom ISDv4 E6 Finger: No buttons found, faking one.
[ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Found x and y absolute axes
[ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute touchscreen
[ 24.048] (II) evdev: Wacom ISDv4 E6 Finger: Configuring as touchscreen
[ 24.048] (**) evdev: Wacom ISDv4 E6 Finger: YAxisMapping: buttons 4 and 5
[ 24.048] (**) evdev: Wacom ISDv4 E6 Finger: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.048] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input13/event13"
[ 24.048] (II) XINPUT: Adding extended input device "Wacom ISDv4 E6 Finger" (type: TOUCHSCREEN, id 10)
[ 24.048] (II) evdev: Wacom ISDv4 E6 Finger: initialized for absolute axes.
[ 24.048] (**) Wacom ISDv4 E6 Finger: (accel) keeping acceleration scheme 1
[ 24.048] (**) Wacom ISDv4 E6 Finger: (accel) acceleration profile 0
[ 24.048] (**) Wacom ISDv4 E6 Finger: (accel) acceleration factor: 2.000
[ 24.048] (**) Wacom ISDv4 E6 Finger: (accel) acceleration threshold: 4
[ 24.048] (II) config/udev: Adding input device Wacom ISDv4 E6 Finger (/dev/input/mouse2)
[ 24.048] (II) No input driver specified, ignoring this device.
[ 24.048] (II) This device may have been added with another device file.
[ 24.048] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 24.048] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 24.048] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 24.048] (**) AT Translated Set 2 keyboard: always reports core events
[ 24.048] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 24.048] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 24.048] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 24.048] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 24.048] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 24.048] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 24.048] (**) Option "xkb_rules" "evdev"
[ 24.048] (**) Option "xkb_model" "pc104"
[ 24.048] (**) Option "xkb_layout" "us"
[ 24.048] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 24.048] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 24.048] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 24.048] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 24.048] (II) LoadModule: "synaptics"
[ 24.048] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 24.050] (II) Module synaptics: vendor="X.Org Foundation"
[ 24.050] compiled for 1.14.1, module version = 1.7.1
[ 24.050] Module class: X.Org XInput Driver
[ 24.050] ABI class: X.Org XInput driver, version 19.1
[ 24.050] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 24.050] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 24.050] (**) Option "Device" "/dev/input/event11"
[ 24.148] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 75)
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 129)
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 24.148] (**) Option "TapButton1" "1"
[ 24.148] (**) Option "TapButton2" "2"
[ 24.148] (**) Option "TapButton3" "3"
[ 24.148] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 24.148] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 24.188] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 24.188] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 24.188] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 24.188] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 24.188] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 24.188] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 24.188] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 24.188] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 24.188] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 24.188] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 24.189] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 24.189] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 24.189] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event14)
[ 24.189] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 24.189] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 24.189] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 24.189] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event14"
[ 24.189] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 24.189] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 24.189] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 24.189] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 24.189] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 24.189] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 24.189] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.189] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input14/event14"
[ 24.189] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
[ 24.189] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 24.190] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 24.190] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 24.190] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 24.190] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 24.190] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
[ 24.190] (II) No input driver specified, ignoring this device.
[ 24.190] (II) This device may have been added with another device file.
[ 24.190] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 24.191] (II) No input driver specified, ignoring this device.
[ 24.191] (II) This device may have been added with another device file.
[ 24.191] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 24.191] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 24.191] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 24.191] (**) ThinkPad Extra Buttons: always reports core events
[ 24.191] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 24.191] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 24.191] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 24.191] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 24.191] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
[ 24.191] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
[ 24.191] (**) Option "xkb_rules" "evdev"
[ 24.191] (**) Option "xkb_model" "pc104"
[ 24.191] (**) Option "xkb_layout" "us"
[ 24.612] (II) intel(0): EDID vendor "LGD", prod id 728
[ 24.612] (II) intel(0): Printing DDC gathered Modelines:
[ 24.612] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 178.286] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 289.940] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 289.940] (II) intel(0): switch to mode 1366x768 on pipe 0 using LVDS1
[ 289.974] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
[ 289.974] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 289.974] setversion 1.4 failed
[ 291.433] (II) AIGLX: Suspending AIGLX clients for VT switch
Last edited by erdi13 (2013-07-29 20:19:11) -
Remote desktop connects, black screen, disconnects after a few seconds
I have several servers running Windows Server 2012 R2. These servers are used for testing, and are members of a domain which has two DCs, each of which are running DNS Server.
Yesterday I noticed one of the servers was having an issue with its remote desktop connection. If I try remoting into this machine, it connects to a black screen, sits there for 2-3 seconds and then promptly disconnects. No error message is given. I tried
this from a couple different Windows 7 machines, and got the same result. I tried from my wife's iMac, which runs Jump Desktop, and too was met with the same result.
I can, however, remote into this machine via RDP from my work-issued laptop, which is running Windows 8. However, I cannot remote into the problem machine via Remote Desktop Connection from one of the 2012 R2 servers--I am met with the same result as the
other machines: connect, black screen for 2-3 seconds, disconnect without error.
I can remote into all of the other 2012 R2 servers without issue from any machine, including the iMac. I am experiencing this problem on one server only.
Since it is a test server, I reinstalled Windows from scratch this morning. This meant formatting the SSD and wiping everything out. I reinstalled the drivers, joined the server back to the domain and installed all of the updates available from Windows Update.
And rebooted. And yet, the problem persists!
I tried troubleshooting the "usual suspects," like turning off Windows Firewall, disabling antivirus software (currently none installed), disabling IPv6, setting a static IP instead of using DHCP, etc. I did notice the network adapter said it was
on a Network, not a Domain Network. I corrected DNS settings, and the network reidentified itself as being on the ParietalBone.net network. And yet, the problem persists. Remote Desktop to this server still yields a black screen for 2-3 seconds, followed by
a disconnect--EXCEPT from the aforementioned Windows 8 machine.
I looked in the TerminalServices-LocalSessionManager log on the offending server, and there are no errors. I only see repeated entries that say "Session X has been disconnected, reason code 12," where X is 1 or 2. On a couple occasions, the reason
code is 11. But I don't see any errors indicating a breakdown in security negotiation.
Without any robust logs or debug details, I'm at a loss of where to look for a solution.I am cautiously optimistic that this may have been resolved.
The network card in the computer was only a 10/100 built-in card, so I replaced it with a 1Gbps card. Interestingly, this did NOT resolve the issue. I ran netsh to check on the state of the chimney offload, but it was already disabled.
In the network card properties, I changed the link speed and duplex from automatic to 1Gbps full, re-ran "netsh int tcp set global chimney=disabled" and rebooted. The problem persisted.
And so I went to the network card properties and set IPv4 Checksum Offload, Large Send Offload (three of these -- IPv4, v2 IPv4 and v2IPv6) and TCP Checksum Offload (IPv4 and IPv6) to Disabled. Jumbo Frames were also disabled. I rebooted again.
After the subsequent reboot, I was able to connect to this Server from machines that previously gave me difficulty. The only machine I haven't been able to test today (I'm in the office) is my wife's iMac, which is at home. However, I was able to bring this
server up via Jump Desktop on my iPad, so I'm suspecting that perhaps one of the offload options was to blame. I'm not sure why this would allow me to connect from some machines but not others. And as noted above, I have many other machines running Server
2012 R2 and they are NOT experiencing this problem. And I've not done any tinkering with network settings on any of them, so their chimney and offload settings are all in the default configuration.
Regarding the other items -- NIC team, virtual machine, etc. -- there was no NIC team, no SRIOV and no RDMA involved.
I had to turn IPv6 off on this machine, and only on this machine, because having it enabled was causing a lot more problems. DNS registration would keep failing, it couldn't pull Group Policy, it couldn't get time sync with the DC, etc. The servers are all
set up with static IPv4 addresses. The router supports IPv6 but I'm not actually using it, so disabling IPv6 wasn't a concern to me. -
Stuck on gray apple screen since 10.4.6 update
My G4 800MHz iMac will not get past the gray apple/spinning gear screen since updating to 10.4.6. I have tried booting into safe mode, reseting xxRAM (don't know the nomenclature), unplugging unnecessary peripherals, and power cycling, all to no avail. The screen stays up for a long time (like overnight), so its not that I'm not patient. Quick note: My 12" PowerBook took a little longer to boot after the .6 update, but seems to be working fine (upon which I write this plea).
Help please.Hello K_OS:
Welcome to Apple discussions.
You might try a couple of things.
Run repair disk from your software install DVD.
If you have it on your other system, run the combo updater.
Do an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
Barry -
IBook freezing at start up after Automatic Software Updates
Hello All! I am new here and this is the first major issue I have had with my iBook since it was purchased back in 2004. Not sure what is going on with it...
I installed all the Automatic Software Updates, as I have always done in the past, then I shut the computer down for the day instead of restarting it. Since it gives you those two options so I choose Shut down. Well, the next morning my husband went to turn the computer on and it gave him trouble but then it finally started up but then as the screen turning on, it was jumpy with lines shooting up and down like crazy. So we force restarted it and then nothing. We removed the battery to see if that would help and it did at least let us get to the log in screen, slowly, but it got us there. Then, it froze. Restart, login, froze. Restart, logged in successfully, froze on desktop screen.
Not sure what to do now. Can anyone help? Let me know if you need any additional questions answered and I will so my best to answer them.
Thank you in advance for your time and help,
KaraHello Kara,
First of all, Welcome to the Discussion forums!
I installed all the Automatic Software Updates
Normally, after installing updates to your software, it is wise to run the Repair Permissions function of Disk Utility found in your Utilities folder.
It sounds like something got corrupted doing the updates/shutdown.
I would try booting to your install cd/dvd and run the Repair Disk function. This is different than Repair Permissions from your HD's Disk Utility.
To do this:
Startup from your install cd/dvd while holding down the "c" key.
When the installer splash screen appears, ignore it, and go directly to the Installer Menu in your top Apple Menus and select Disk Utility.
When Disk Utility from the Install disk opens select your HD in the left pane and then select the First Aid Tab if not already selected and then click on Repair Disk button. If it finds errors it cannot repair you may need a more robust Disk Repair utility such as Disk Warrior or Tech Tool Pro.
If Disk Utility reports the disk has been repaired quit the Disk Utility and then quit the installer and reboot and see if you can now login normally and your desktop appears (unfrozen).
If it does startup normally, open Disk Utility from the HD and run the Repair Permissions function.
post back if you cannot boot to the install cd/dvd and run Repair Disk or if you have further comments or questions,
littleshoulders -
Hi Everyone,
I have a 2012 15" MacBook Pro Retina and I run Bootcamp with Window's 8.1 Pro – And it worked great on Mavericks!
After installing Yosemite, my computer worked fine until the first time I restarted it.
Now every time I boot the computer to OSX, the apple logo with the load bar comes onto the screen, and then it just goes to a black screen with a cursor. The cursor moves, but there is nothing to click on.
To attempt to solve this, I used another computer to download Yosemite and I created a USB drive from which I could boot the Yosemite install.
Now, every time I get that black screen (i.e. every time I turn on my computer) I have to put in the USB drive and reinstall Yosemite and it works fine.
This is extremely annoying since I have to use SolidWorks on the windows side for school and so I am constantly restarting my computer and having to reinstall Yosemite.
Note: Whether Yosemite is working or not, I can boot into Window's 8.1 Pro and it works fine.
Question: Has anyone figured out a way to permanently fix this problem? Has Apple acknowledged the problem yet?
Many people have had this problem, and it seems like the general solution so far is just to not to your computer off.
Also: My Bluetooth mouse doesn't work on Yosemite even though it worked fine on Mavericks.
Thanks in advance for any help!I too am experiencing this on my home external monitor (HP ZR24w); screen will just blink out or get glitchy first (top half with green vertical lines, bottom with content from top) then go black. The mouse sometimes still shows, sometimes doesn't. My work external monitor (27" DVI Apple Cinema display) does not do this, but often when connecting the cable to my MacBook, the colors will go a bit weird for a moment. For a while I thought this was an issue with my home external, but I am starting to believe this is a damaged Thunderbolt port issue, and that might be an expensive fix.
I had found that when this happens, if I put the screens to sleep then waking them immediately, it comes back up ASAP. -
Touch Screen unresponsive after iOS 8 update
My 1 year old 64GB iPhone 5 touch screen started to become unresponsive after iOS 8 update
It's not consistent. Touch screen functionality will seize whilst phone is being used for either answering calls, typing messges, surfing, gaming etc and won't become responsive until it is turned off and on again (via power button). Home button is functioning with no problems.
As the phone is now out of its warranty period I want to verify if it's the OS that's causing this or do I actually have a hardware issue.I have the same issue. iPhone 5, 1 year-old, not even a scratch.
Sometimes my touch screen works, sometimes not. When it works, it is just for some seconds, then some phantom touches start to happen all over the screen, but specially, when i'm typing, it types z or m, when I try to type something in, and it receives it, it will act as z or m again....
If I switch off my screen and switch on again... sometimes it will work, sometimes it wont... veeery unstable.
I considered downgrading to 7.1.2 but since I heard it is ilegal I decided to wait for a new iOS release.... any suggestions? (already wiped it and the issue continued...)
Is it really not recommended to downgrade it and have my phone funcionalities back?
Maybe you are looking for
-
Downloaded itunes 11.1.3 on my macbook pro and now my itunes store isn't working
Hi, I have recently upgraded to the new itunes software 11.1.3 on my 2010 macbook pro everything works fine except the itunes store. When I click to go into the itunes store and click music or movies etc it says "accessing music store" and looks like
-
HT4623 I'm trying to restore my phone but I forgot my backup pass word. Can it be recovered?
Is there a way to retrieve your password for a backup? I got a failure message while updating to iOS 7 and my phone has none of my info and apps on it and I need the password to use an older backup file to restore it.
-
Hi I am wondering what the best way to display hex values in a JTable is. At the moment I am using the Integer.toHexString method to convert an integer to hex but the problem with this is that it gets rid of leading zeros. Is there a way to keep the
-
Hi everybody, I'm using ColdFusion's form validation (cfform), but would like to know if there's a way to change the generic message that Codfusion throws at run time. The message generated by CF is: Error in balance text. This is kind of cryptic and
-
How do you save your artwork in Photoshop CC 2014 as an PNG or JPEG file when it doesn't give the option? Thanks for your time and help in advance.