GRAY WİFİ PROBLEM

Hello dear authorized,
I bought iphone 4s from abroad.I was using the phone. 5 months after trying everything, but ran into a problem.
My phone has become gray wifi key.Wi-Fi is not active. Wi-Fi turned on. Icon dull or fadedios
6.1.2 installed on my phone. I've tried a lot of methods to correct this situation to your site.But it still did not improve the situation.Guarantee that the phone abroad, Turkey was not valid. I live in Turkey,Istanbul.What should I do in this case?
Waiting for your help very urgent.
iPhone4S
IM: 013047007997618
Model: MD239B/A
Mehmet Demircioğlu
İstanbul/Turkey
Mobile: +90 532 130 92 93
www.mehmetdemircioglu.com.tr

Hello mhmtdemircioglu,
I would be happy to assist you with this problem. First start by trying the following steps below:
Verify that Airplane Mode is off.
Restart your iOS device
Update your iOS device
Reset Network Settings, by tapping Settings > General > Reset > Reset Network Settings
Restore your iOS device in iTunes.
If these steps dont fix the issue you may need to look into repair on your device.
-Derrick Lambert

Similar Messages

I have purchased Mountain Lion to correct the gray cursor square problem, and I cannot get Mountain lion to download

I purchased Mountain Lion from 10.7.5 on my Imac to correct the gray cursor square problem, now Mountain Lion will not fully download. Any recommendations?

Upgrading to a newer OS X does not often correct pre existing problems. MIght be a disk space issue, or the startup disk needs repairing.
Make sure there's enough free space on the startup disk.
Control click the MacintoshHD icon on your Desktop then click Get Info.
In the Get Info pane you will see: Capacity & Available
Make sure there's at least 15% available disk space.
For the gray cursor issuee, startup your Mac in Safe Mode
A Safe Mode boot takes longer then a normal boot so be patient. Once you are in Safe Mode, click Restart from the Apple menu.
If that didn't help the cursor issue, launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk
If Disk Utility reports errors, since v10.7 Lion is the currently installed OS, restart your Mac while holding down the Command + R keys so you can access OS X: About OS X Recovery.
From there you can access the built in utilities to repair the startup disk.
message edited by: cs

Gray screen booting problem

I been having this Gray Screen problem since yesterday, my Mac is a MacBook Pro late 2011, I've tried everything (reinstall Mavericks 10.9.4, repair disk permissions, and even Safe Mode) but nothing has worked so far for my problem so today while looking for other solutions I used cmd + V and encountered the following screen and I don't know what to do because during single mode (cmd + S) I mounted the drive in read/write mode and tried to remove /etc/launchd.conf but it would only overwrite it.
I don't know what to do so could someone please help me, I really need my Mac for work

type:
sync
sync
sync
reboot
Mac OS X: Gray screen appears during startup

IPhone 6 plus space gray screen manufacturing problem

I found out that some iphone 6 plus screens aren't the same as the ones which were sold close to the launching event due to huge demand and manufacturing problems... now unfortunatly no glass screen protector fits snugly as it should...
Being more specific my iphone is one of this iphones and I am shocked apple has never informed or talked about it...
This is the messege I got from the company iloom after informing them about their glass screen protector.
The messege:
"Okay, so this is a case that is well known to us, is this is the explanation below: Thank you for the photo verification. We've gone ahead and processed the full refund for your order. Please be advised that it may take two to ten business days, depending on your credit card company, to have the refund reflected on your statement. After our investigation, we have found that this issue affects about ~20-30% of all iPhone 6 for Space Grey ONLY. The root cause, at the moment, is believed to be from the glass manufacturer that Apple uses for iPhone 6, as they've had issues with supplying glass parts for their screens. Instead of sticking to one particular screen display manufacturers, they have used several others in order to meet demands. If you have purchased iPhone 6 Silver or Gold, the glass specification is same as others, but this is not true for iPhone 6 Space Grey. At this moment, we have to inform you that whatever tempered glass you use from iloome, it will NOT be compatible with your particular iPhone 6. I don’t want to discourage you from repurchasing, but it will have the same outcome, so I would leave it on if you want the full cover protection until we come up with a solution to this issue! (Early April) Thanks for your patience and we apologize for any inconvenience. Best regards, Brendon Iloome"

I am sure that expected date is not accurate anyway. It has changed many times for me. I was one of the ones that got up and ordered a few minutes after the pre order opened. Talked with cs and in store reps many times and all say the same thing. That expected date is only based off of all of the many pre orders coming in no matter the time you ordered it. So since there are many orders out there then that is why this date now says unavailable. All the reps that I talked to said the date that first showed up on your confirmation when you first bought the phone is the date you are going to get it. For me that is 9/19. Read a lot of posts and all many say that this happens every year when the iPhone comes out. Just hang in there till next week when the pre orders are verified.

A problem about Live trace

Hello, I use Adobe illustrator CS4 in MAC, I often used function of Make and convert to Live paint for my work.
But One day i found a serious problem in used this function, I really don't know cause.
Pleae look at the image under.
This gray things are problem in red circle.
I tested in another computer, Live Trace> Make and convert to live paint is worked well.
Like this.(Illustrator CS5..is it cause of program's version?)
anyway, this problem made in Just my mac. HELP ME!

The function works the same in both versions.
Take a look at the options.

White swatch is gray

Hi there,
I've noticed that Illustrator CS4 displays the white swatch as gray in swatches palette. The unfortunate thing is that when I place the Illustrator file that has white in the art into InDesign, everything that is colored white appears gray. The problem is that I work in a print shop where we proof things via PDF on screen to some customers. When I produce a PDF out of InDesign with said placed art, white appears gray. Naturally my customers start asking why their job is printing gray instead of white.
My question is if there is any way to disable this appearance of white in the process so I end up with an accurate PDF? Any thoughts would be greatly appreciated.

Hi Wade,
Trashing the preferences seems to have done away with the gray/white swatch. Thanks! In regard to your previous suggestion, I'm 100% sure it was the white swatch I was selecting. The white swatch appeared gray both in the color palette when all CMYK sliders were set to zero, and when I opened the Default CMYK swatches palette. Also, any object I drew had an ever so slight gray cast in Illustrator and PDFs.
It's as if I toggled on some appearance of white setting that is similar to the options for appearance of black. Being of the nature I am, even though the preference trashing seems to have fixed it I would still like to know what setting made the difference.
Thanks for all the help, everyone.

Paste & Paste in Place problem

Hi there,
Recently i have these problem in the following description:
1- Create a new documet.
2- Draw a recangle frame on a page.
3- Copy the frame, and when i go to the other page on the same document the paste command is grayed.
Another problem:
1- Copy empty rectangle frame
2- Go to other page, when i paste the frame is filled with a content (fake content)
Also when i copy an item and try to paste it in place command it's not paste in same place.
I tried troube shooting
http://forums.adobe.com/thread/526990
but there's no solution
I tried Creative Suite Cleaner and reinstall and install indesign but all of these it's not solve the problem.
Indesign CS6 8.0.1
Windows 64bit

Ahem; yes…
Sometimes I should read more carefully.
In the meantime I could have a look at Shlomit's InDesign document.
I think, what he is seeing is not related to the OP's problem, but an issue in itself I can already observe in InDesign CS3.
Something "bad" will happen to the positioning of objects copied from master spreads by "Paste In Place", if the overall width of all pages left from spine is not equal to the overall width of pages right from spine. The pasted (in place) objects will move by half of the value the overall page widths will differ.
Either in positive x-direction, if the violation of symmetry (the wider side) is on the left side of the spine, or in negative x-direction, if the violation of symmetry is on the right side of the spine. It's not important, if the binding is LTR or RTL.
Still I have to test a bit, to see if that hypothesis is sustainable…
What is working alright:
Overriding or detaching objects from the applied master pages.
That will work without seeing a shift.
Uwe

Problem with J2SE 5.0

I'm ADC student.
First and second developer release was good for me.
Install last J2SE 5.0 last day
Install is good, no error.
Go to Utility
Open /Java/J2SE 5.0 Folder
Open Java Preferences
Window is empty, gray, nothing.
Open Java Cache Viewer
Window is empty, gray, nothing
no problem with first and second release ?
Than'ks
(excuse me for my bad english)

Delete the folder and /Library/Receipts/J2SE50Release3.pkg. Then, reinstall, using the downloadable from http://www.apple.com/support/downloads/java2se50release3.html. Works on my system.

Contribute bag/problem

Does anybody know how to keep Contribute out of replacing
special characters inside the code?
I placed 2 Google gadget links inside a web page, edited page
in Contribute CS3 and published it. Now the page has a Runtime
Error. Contribute changed both links.
Here is an original link:
http://gmodules.com/ig/ifr?url=http://hosting.gmodules.com/ig/gadgets/file/108314492880238 781150/curcalc.xml&synd=open&w=320&h=200&title=Quote.com%3A+Currency+Calcu lator&border=%23ffffff%7C3px%2C1px+solid+%23999999&output=js
…and here is Contribute transformation:
http://gmodules.com/ig/ifr?url=http://hosting.gmodules.com/ig/gadgets/file/108314492880238 781150/curcalc.xml&synd=open&w=320&h=200&title=Quote.com%3A+Currency+Calcu lator&border=#ffffff|3px,1px+solid+#999999&output=js
The difference is:
border=%23ffffff%7C3px%2C1px+solid+%23999999&output=js
border=#ffffff|3px,1px+solid+#999999&output=js
Is there any Preferences in Contribute that can be changed to
prevent Contribute from replacing special characters?
You can see the page at
http://www.accordfinancial.com/home_gadgets1.html
and
http://www.accordfinancial.com/home_gadgets.html

Thank you ThinkInk. We've tried to include url onload using
js function. Url is actually wrapped with script tag - <script
src="
http://gmodules.com/ig/ifr?url=http://stockcharts.com/minichart_goog_module.xml&synd=o pen&w=320&h=260&title=Market+at+a+Glance&border=%23ffffff%7C3px%2C1px+soli d+%23999999&output=js"></script>.
We fixed the problem by replacing colors %23ffffff and
%23999999 with color's name white and gray. The problem was caused
by #. It is temporary fix, but it works in this case.

Mac pro gray scrren

I have been having previous problems with my mac pro 12 core 64 gb. Like boot loops and gray screens. my problem now is all three of my screens are gray and a spining circul no mouse on screen

and all this time what have you been doing? no system repairs? not using Lion Recovery to repair or reinstall the OS? A Safe Boot? take it in and get an appointment? see if it is the GPU?
And run Apple Hardware Test.
I assume 3rd party memory. Have you tried removing some to get it doown to 48GB?
What 3rd party hardware? does that require drivers?
Also what softeware and is it all compatible with 64-bit drivers and 64-bit kernel?
All you have given us are not enough to go by.

Address Bar Mostly Gray

The beauty of a Mac is that it can be used by a five year old. The problem is that my five year old did something to Safari. When I asked her what she did she said "I clicked on all the places I wanted"
Here's my problem. The forward navigate button, stop/reload button and the address window are now 'grayed' out. The buttons work and you can type in the address window but it's gray. The problem only exist on "her side" of the computer - she has her own profile.
Using Safari 1.3.2 with OS 10.3.9
Thanks
emac 1.25ghz g4 Mac OS X (10.3.9)

Hi
As Dimaxum posted, my choice too would be to trash the Safari preference file.
If that doesn't work, another suggestion would be to hold down the command key and click drag the Address Window and any other non-functioning icon off the bar (disappears in a puff of virtual smoke). Then, go to the View Menu>Customize Address Bar, dragging new items back to the bar.

Material number is not populating in PO in tcode ME23N

Hi,
The material number is not populating in PO in transaction ME23N. The coloumns is displaying as blank and supressed(Gray).
This problem occured during the upgradation from 4.6C to ECC6.0.
We have checked the SPRO configuration for field selections and these are not having any problem.
Data is updated in database tabes but it is not displayed in ME23N screen.
Please advice.
Thanks,
Rakesh

check OSS Note 492757 - ME21N/ME52N: You cannot set field selection for material
maybe it helps to solve your issue

ITunes list doesn't show up in media browser

I'm just starting with Final Cut Pro X. When I click on the "Music and Sound" button, and select iTunes, nothing shows up on the list. My iTunes is open, and I have plenty of things that should show up. What should I do?

I did the job with songs from an audio CD imported in iTunes.
Here, I just created a fresh document, inserted the song thru Inspector > media then called Save as…
I checked the box asking to save the song's file in the document.
The result was :
I inserted a second song and called Save as… one more time.
This time, as the doc was save once, the checked box was grayed.
but, no problem, the second song was embedded too.
So, I don't understand why it would bail on your machine.
I did the trick on a macIntel running 10.6.3.
Yvan KOENIG (VALLAURIS, France) samedi 24 avril 2010 21:07:43

Can I change color of all objects at ones ?

Hello guys
I understand that's very fundamental question, and I promise I search the forum prior to posting, but perhaps it's my bad english and wrong phrasing, that leads to poor results. So if that has been discuss, please kindly don't waste your time, just link me to the post and I will read away.
I have very complex file, with hundreds of paths, shapes, text, outlined text, etc... It's a brochure with graphs, scematich drawings and text.
Last moment, the client like the reverse the colors from (current) Black on white, to all White on dark gray background.
Problem is, I can't seem to find easy way to just change the colors, without selecting one by one, every single object. When I selest all and choose white, it start filling paths with solid fill... Editing it wastes allot of my time and I have many pages to do.
Is there any way to simple change color of everything at once, just from black to white ? Or do I have to go object by object manually ?
Thank you very much, for all the help so far, and I'm sincerly sorry to waste your time if that has been covered previously.
Good day
ciao ciao
Monika

Thank you both for such prompt follow up. I know it's just typing and it's easy but I sincerly mean it. Thank you.
The INVERT work on some images.
The "SAME" seem to work funny way. When I select STROKE COLOR, it does nothing, but when I select WIGHT then it does and in fact I'm able to change lots of strokes at once with ease. Even tho I'm left with few small bits here and there which I need to change manually, it is certainly far better than doing one by one.
Thanks a lot for the help, it's what I was looking for.
By the way I not once used the SAME menu. Feel so lame, given I use AI (not daily but often) for few years now... Shame.
Thank you and you guys have a great day
xoxo

How to read the input FORMAT of a Checkbox in list.

hi,
suppose i have,
WRITE CHK1 AS CHECKBOX INPUT OFF.
Now i have, grayed check box,
Problem. how to read from program, whether the checkbox is input off or on.
pls reply

Hi,
Check this example of how to use the Checkbox in a list..
REPORT ztest NO STANDARD PAGE HEADING.
DATA: BEGIN OF itab OCCURS 0,
            check,
            value(20),
          END OF itab.
SET PF-STATUS 'TEST1'.
itab-value = 'ETSAT'.
APPEND itab.
itab-value = 'ETSATADSF'.
APPEND itab.
itab-value = 'ETSAT'.
APPEND itab.
LOOP AT itab.
WRITE: / itab-check AS CHECKBOX,
                itab-value.
ENDLOOP.
AT USER-COMMAND.
DATA: wa LIKE itab.
DATA: itab_download LIKE itab OCCURS 0 WITH HEADER LINE.
IF sy-ucomm = 'DOWNLOAD'.
    DESCRIBE TABLE itab.
    DO sy-tfill TIMES.
      READ LINE sy-index FIELD VALUE itab-check.
      IF sy-subrc <> 0.
        EXIT.
      ENDIF.
      CHECK itab-check = 'X'.
      itab_download-value = itab-value.
      APPEND itab_download.
    ENDDO.
   download
    call function 'WS_DOWNLOAD'
         exporting
              filename = 'C:\TEST.XLS '
         tables
              data_tab = itab_download.
ENDIF.
Thanks,
Naren

GRAY WİFİ PROBLEM

Similar Messages

Maybe you are looking for