Grayed out icon after install

I just purchased CC and downloaded to my Mac Book Pro running Mavericks. The icon at the top of the screen is grayed out and when I roll my cursor over it, I get a spinning wheel. Any thoughts? Restart?

Mac Spinning Wheel https://forums.adobe.com/message/5470608

Similar Messages

Can no longer use the gray out icon in the Menu bar to update CC

Since I upgraded my Mac OS from 10.9.4 to 10.9.5, I only have a grayed-out icon in the Menu Bar in the Finder for checking for updates. When I try to access it, I only get an endlessly spinning wheel. Any other finding this glitch also? Any cure for it?
I also couldn't find an app which I thought I'd used before called Adobe Updater to check for updates.

I am having the same issue on 10.8.4

HT1578 I have found that I can't access the contents of the encrypted disk in time machine backups. The Finder window displays a grayed-out icon representing the disk. Can this be remedied?

I have found that I can't access the contents of the encrypted disk in time machine backups. The Finder window displays a grayed-out icon representing the disk. Can this be remedied?

Time Machine error: Apple Support Communities
OSStatus 5 when trying to use Lion...: Apple Support Communities

Battery life run out faster after install ios 7

please help the battery life run out faster after install ios 7 and signal strengh show only 2 bar in my house after install ios 7 too.
thanks

Try this out: http://helpios7.com/ios-7-battery-issues/

Logging out behaviour after installing leopard

I believe that before I installed the Leopard upgrade when I would log out of one account on my machine and nothing was running, the system would just log off the account without prompting me and return the to the login screen.
After installing Leopard it seems to me that whether or not something is running the OS prompts me if I want to close all applications and continue logging out.
Is this a new behaviour of Leopard or is there something running in the background that I don't know about?
thanks

To be honest, I can't be completely certain how things were in Tiger since I have always used ⌥⇧⌘Q to log out immediately (assuming there aren't any unsaved changes), but the existence of both options suggests to me that the dialogue was always there. Maybe the wording was different, but I don't think the behaviour has changed...

Message Mapping - Grayed out icons

Hi all
this is a weird error.
Why are all the icons except for "Select Message" grayed out under the Design tab in MM?
Note: I am in edit mode:
Regards
krishna

Thanks manikantan,
What should i ask the installation guy to do/ check?
Regards
krishna

Time Machine restore is grayed out even after selecting a file

(step one) I used Migration Assistant to restore a 2009 27" iMac with my Time Machine backup from my 2009 24" iMac that crashed.
(step two) I open Mail on the restored iMac, the inbox loads, my folders in "on my mac" are listed, but the email messages are not there. I click on one of the folders, go to Time Machine/browse other backup disks (which is the same time machine I used in step one) and I can see the old email messages when I "enter time machine".
(step three) When in the time machine interface, the tick marks are grayed out. The mail program is showing and I can select one of my folders and see the mail messages. However the restore button is grayed no matter if I select a folder or a particular email message.
(step four) I cancel out of the time machine interface, go to system prefs/time machine and mount this same disk as the new backup disk. The disk is 1 TB with 178 GB left from the old iMac. The time machine starts a backup and then stops with the error that there is not enough room to backup.
(step five) I go back to step 2 above, and have the same grayed restore button.
Please help! Thanks

Although you can restore messages from a Time Machine snapshot within the Mail application, it generally won't work with messages that were saved by an obsolete version of Mail. In that case, you have to use an alternative method.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2
Right-click or control-click the highlighted line and select
          Services ▹ Open
from the contextual menu.* A folder should open. Inside it are subfolders representing your Mail accounts. The names refer to the email addresses you use.
Enter Time Machine and scroll back to the snapshot you want. Select the account folders you want and then select Restore ... to... from the action menu (gear icon) in the toolbar of the snapshot window. Restore the folders to the Desktop, not to their original location.
From the Mail menu bar, select
          File ▹ Import Mailboxes...
Choose Apple Mail as the format and import from the mailboxes in the folders you restored to the Desktop. The imported messages will appear in a new mailbox. Move the ones you want to keep wherever you like and delete the rest. Then delete the folders on the Desktop.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Serial number field is grayed out when re-installing

On a once working system(NT), I started getting "can't start NI488" errors... in event viewer I see that "GPIB Device class driver depends on GPIB board class - not found" and another similar event error that states "GPIB class driver requires port group - not started". I have un-installed and re-installed the software and board several times with no effect. I suspect the problem is that during the install process when it comes time to "configure" the board, the serial number drop-down box is grayed out and cannot be accessed. I have verifed the PNP setting are "off" in the BIOS as noted in the one related article I found in the knowledge base.
Any other thoughts would be most appreciated.

Hi
I'm a little bit stumped too. Be sure that NI-488.2 is at least version 1.60 (I'm not sure,but I think that's the one on your CD), otherwise download it from our website.
Things you can try (again).
1. Remove all PCI boards you have.
2. Remove NI-488.2 under Add/remove programs
3. Clean the registry with a "registry cleaner". Don't forget to make a backup of the registry first.
4. Clean the registry by hand. Search for GPIB entries and delete them.
5. Install again the GPIB driver.
6. Configure the board.
Hopefully that works, otherwise you have to think about the last step. ---> Install NT again. Unfortunately without guarantee that this will help.
Luca P.
Application Engineer
National Instruments
Regards,
Luca

Why are the NI-DAQmx Base for LabVIEW options grayed out using custom install (with Action:Skip)?

I'm trying to install NI-DAQmx Base 3.7.0 for LabVIEW 2013 (LV is installed). When I try Standard Install, it doesn't install for LabVIEW (only the Common and C and USB tools), but gives a successful installation message.
When I try Custom Install, all of the "...for LabVIEW 20XX" options are unchecked, grayed out and the Action says "Skip".
I'm trying this on a 2011 MacBook Air 11" running OS 10.9. LabVIEW runs fine.
Thanks for any suggestions.
Solved!
Go to Solution.

Hi,
OS 10.9 is not officially supported by NI with the DAQmx Base 3.7. This information is from the description of the driver (http://www.ni.com/download/ni-daqmx-base-3.7/4272/en/):
OS Support—NI-DAQmx Base now supports the following versions of Mac OS X:
Mac OS X 10.7 (Lion)
Mac OS X 10.8 (Mountain Lion)
So this seems to the be the problem. Either you choose another OS version or wait for a new driver which supports 10.9
Regards,
Michael

Can't Connect to My Other Computer - Grayed Out Icon

For some unknown reason I am unable to connect to my other computer. I see an icon for it in my finder window, but it looks grayed out. When I click 'connect', an alert box pops up saying that it's contacting the IP and "Timeout in X seconds". It counts down to 0 and nothing happens.
File sharing is on. I've restarted the computers. No firewalls. Bot h are able to connect to the internet. Very simple setup. What's wrong?
CHeers.

Hi, what does your network setup look like, physically?
Best,
~FifthWheel

Strange lay-out Firefox after installing on my system

After installing Firefox on my Dell Latitude E6520 with Windows 7 Enterprise NL x64, Firefox start extremely slow en shows a strange lay-out. All caracters seems like hex numers. I tried starting FF with admin rights, as administrator... no difference. But when I run FF as a domain admin (system is member of a Windows domain) it looks good. Still slow start-up.
Look here for a screenshoot: http://twitpic.com/6iq6pi

Try to set the pref gfx.font_rendering.directwrite.use_gdi_table_loading to false on the about:config page.
If that doesn't help then try to disable some other gfx.* prefs
You can also do a font test to see if that helps to identify the font that is causing it.
*http://browserspy.dk/fonts-flash.php?detail=1
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold(user set).
*Preferences can be reset to the default or changed via the right-click context menu.

Shortcut icon replaced by windows file icon after installing 3.6.12 version

using W7. After installing version 3.6.12 and changing the persona i noticed that the mozilla icon on the task bar was replaced by a windows file icon.

You can try to reset the Windows icon cache.
* Open the Task Manager (Shift+Ctrl+ESC)
* In the Process tab, right-click on the Explorer.exe process and select End Process.
* Open the file picker via "File > New Task (Run)" and click the Browse button.
* Type or Paste %USERPROFILE%\AppData\Local in the File name field (AppData is a hidden folder).
* Select the file IconCache.db and use Delete in the right-click context menu to delete the file.
* After the IconCache.db has been deleted, start a new explorer.exe process via "File > New Task" to get the desktop and Taskbar back.
* It is possible that the file IconCache.db is a hidden file and in that case you need to enable viewing hidden files. You can verify that you can see the file before doing the above mentioned steps.
See http://kb.mozillazine.org/Show_hidden_files_and_folders

N95-1 V21.0.016 HIDE APPLICATION ICON AFTER INSTAL...

I used Sandisk 4GB SDHC card with my N95-1 V21.0.016, currently had all my mp3, MV,internet links, photos, wallpapers, software, & games all installed in this 4GB card except "Yahoo Go" in phone memory (as advised by Yahoo), my 4GB card available memory is around 890MB left with 2,989MB used for the above. i found out that original Nokia apllication like "WLAN" icon, "Dictionary" icon, "Search" icon already HIDE in phone ...coz when i go to assign shortcut item, i found there are still exist & still can be assigned shortcut in navigation button but it won't shown in phone menu...anybody know why? I can say that it is pretty good to start a fresh upgrade firmware like V21.0.016 for N95-1 with fresh installing ie not RESTORE from previous firmware back up data...but we had thounand of valuable data ..so what can we do? So when think of this important data , we r sure to restore bac. Once restore sometime depends LUCK..If lucky enough all data restored is OK & workable but not all the time is so good..I already reformat V21.0.016 three times but there is some problem must be happen....tired !

Something you are installing. Some third party application is causing this problem.
Try NOT installing all those games and other applications or install one by one until you find which one is causing the problem.
640K Should be enough for everybody
El_Loco Nokia Video Blog

Missing Safari icon after install of iOS 8

After download/install of iOS 8,my Safari app icon went missing. Can't retrieve it from App Store as it comes w/ iPhone (5s). How do I get it back? Thanks!

Hello jrdtnpsp,
Thanks for using Apple Support Communities.
Please check your restrictions as directed in the support article below to ensure that either your restrictions are disabled, or Safari is not disabled.
iOS: Understanding Restrictions (parental controls)
Take care,
Alex H.

Can't find icon after installing Elements 6.

I installed Elements 6 after I replaced Hard drive, but when completed, there is no icon to access Photoshop.

You will need to install Rosetta to possibly have Photoshop Elements function. Please see If you need to install Rosetta - http://docs.info.apple.com/article.html?path=Mac/10.6/en/27987.html for details on installing Rosetta.

Grayed out icon after install

Similar Messages

Maybe you are looking for