Grayscale printing on c410 photosmart all in one on an imac 10.5.8

I am trying to figure out how to print in grayscale and have no idea how to do that.  I am not very experienced.

Hi,
Follow the steps below in order to print using Black Ink only:
1. From the application used to print, click the File menu and select Print. The Print window appears.
NOTE: The Print window might be minimized: Click the blue triangle next to the product model to see all available settings.
2. To access the color options, click the lowest selection box listed as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
3. Select Paper Type/Quality from the drop-down menu.
4. Click the triangle next to Color Options to expend the settings.
5. Set the Color field as Grayscale.
6. Set the Grayscale Mode as Grayscale or Black Ink Cartridge Only.
You may save the settings for future use by clicking Presets > Save Current Settings as Preset...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • How can I print to hp photosmart all in one 7280 from ipad

    How can I print to hp photosmart all in one 7280 from ipad
    This question was solved.
    View Solution.

    Hi,
    Although the C7280 is not AirPrint enabled, you may still print through the local network using the HP ePrint mobile app.
    you may find the steps to get and use the app in the following document:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3204785&tmp...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP PHOTOSMART ALL-IN-ONE 5510 WONT PRINT AFTER GOING TO SLEEP MODE

    My printer model:
    HP PHOTOSMART ALL-IN-ONE 5510 B111A
    Problem:
    Printer goes to sleep mode. After 25-30 minutes the wireless connection between the PC and the printer breaks. Blue Wireless light is on even at the sleep mode and I can see that the printer is connected to my router and there is internet connection. HP Print and Scan Doctor sees the printer but I cannot awake the printer unless I restart it. 
    What I have tried so far:
    I have tried all the solutions hp.com offered including; reinstalling driver, updating printer software, setting static IP to printer, setting static DNS servers, using HP Print and Scan Doctor.
    I have seen people asked about this question before and there was no solution. I really need HP help!
    This question was solved.
    View Solution.

    Let’s try this.  Verify in the printer that 'Auto Off' is disabled.  Set a static IP in the printer outside the DHCP range of the router.  Use a fixed wireless channel like 1,6 or 11, never 'auto', try channel 1 first then the rest.  Set router to 20Mhz only, or 145Mbps depending on router.  Always use WPA2-AES encryption.  Power off both.  Power on router wait 3 mins.  Power on printer and verify it reconnects to router.  Now try.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • How to print to my wireless all in one photosmart prem c410 when printer is not powered on?

    how to print to my wireless all in one  photosmart prem c410 when printer is not powered on?

    Hi,
    You cant print to a printer that you physicly turned off. Most network printer have a sleep mode, so leave it on and after a while it should go into a sleepmode. And should wake up when a printjob is being sent.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • HT1338 I have updated my new MacBook Pro for HP Photosmart All-in-One, but it still will not scan - it will print, but will not scan. How can I fix this?

    I have installed the updates for my HP Photosmart All-in-One c309a.  It prints, but will not scan.  Tells me to update - I did that, but still won't scan.  Any suggestions to make the scanner work?
    This all worked perfectly with my old 2008 MacBook Pro.

    Have you tried scanning from Image Capture or Preview?
    A current driver is shown to be available for Mavericks (auto-downloaded):
    http://support.apple.com/kb/ht3669#HP
    But many people have found that manufacturer scanning control software doesn't work. They have to use the Apple-provided software.

  • Can my hp photosmart all-in-one 7200 printer connect to ipad 2 via bluetooth?

    I have a hp photosmart all-in-one 7200 printer with a hp blue tooth dongle.  It works well with my cameras, but I cannot get my ipad 2 to recognize the printer.

    Hi,
    Printing via Bluetooth from an iPad is not possible due to iOS limitations, as Apple did not include the Bluetooth printing protocol in the iOS.
    If your printer is HP Photosmart C7200, you may use the HP ePrint Home & Biz App to print from your iPad through your home network
    However for the Officejet 7200 your only option is to look for any available 3rd party printing solution from the App Store.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Can HP Photosmart All-in-One C6180 be made to recognize iPad 2 AirPrint so it can print to HP?

    Can HP Photosmart All-in-One C6180 be made to recognize iPad 2 AirPrint so it can print to HP?

    Hi,
    I can' see it in this list (updated last week). Please check it yourself again.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • After upgrading to mavericks how can I connect my HP PSC 2510 photosmart all-in-one printer to my mac?

    After I upgraded my macbook air to mavericks, my HP PSC 2510 photosmart all-in-one printer doesn't connect to my macbook air.  When I try to launch the all-in-one installer from the HP CD that came with the printer, I get a message saying it cannot open because powerPC is not supported.  The HP site has not been helpful in resolving this issue.  My understanding is I first must connect the printer to the wireless system (I use airport extreme) before using airplay for printer software upgrade.

    Your suggestion is helpful, but after some digging on the HP site I found a detailed solution to my problem.  The link is: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01749025&tmp_task=setupCate gory&cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=303770

  • HP Photosmart All-in-One C4494 printer

    Where can I download a driver   for my  HP Photosmart All-in-One C4494 printer model   Q8396B?  Thanks

    Hi,
    As it is a member of the C4400 family:
         http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c01369673
    Please use the following link:
        http://support.hp.com/us-en/product/hp-photosmart-c4400-all-in-one-printer-series/3655558/drivers
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • C3180 Photosmart All-in-one won't print. Gives message 'clear paper jam.' There is no paper jam.

    C3180 Photosmart All-in-one won't print. Gives message  'clear paper jam.'  There is no paper jam.  About a month ago there was a paper jam, but was removed.  It worked fine since then until yesterday.  I've tried all the HP trouble-shooting suggestions- unplug, take apart, manually move carriage, etc. and nothing has solved the problem.  The paper does not advance...all that happens if I try to print is a lot of noise like carriage going back and forth and after a/b 1-2 minutes it will show the "red X" blinking on the printer and a message on the computer screen, "Clear paper jam."  When the problem first started yesterday the message was that the printer was "Out of paper."  I need to print a resume and this is just the wrong time for someone such as myself with little computer knowledge to try to figure it out.  Thanks for any suggestions!

    Hi there pattimessick,
    You may not need to remove/re-add. Try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own (especially connectivity problems) and if not give a better idea of what is going on.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Photosmart all i one 7520 Printing problems the wrong scale the printout

    I will print covers for DVD cases. Have done it before from two different programs to my previous photosmart printer without problems. Now since I change the Photosmart All in One 7520 will be reduced format in both height and width. A degradation of the picture takes place.

    Hello there @AgnetaL 
    Welcome to the HP Forums!
    I understand you are facing some issues when printing DVD cases from your Photosmart 7520.
    I would recommend checking the printers specifications, as this unit may support different sizes, paper types, etc than the previous printer did.
    Here is the link for you to get to the: Printer Specifications for the HP Photosmart 7520 e-All-in-One Printer Series
    If there is still an issue, let me know which programs you have tried printing from, which paper size and type you are using, and which troubleshooting steps you have tried already.
    Have a great Monday!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • MacBook pro and airport extreme router. How to print wirelessly to an old HP wireless photosmart all in one printer

    With MacBook pro and airport extreme router, how can I print wirelessly to an old HP wireless photosmart all in one printer?  What is needed or what process?

    You need to make sure that the HP has an updated printer driver that works with 10.6 for that printer. You can check here:
    http://www8.hp.com/us/en/support-drivers.html

  • Wireless printing from ipad to photosmart all in one 4780

    How do I print from my ipad to my wireless printer.  I have hp eprint app but I cant figure out how to use it.  My printer is supported, it is a photosmart all in one 4780.  Any help will be appreciated, thank you!

    Hi,
    Are you able to make copy.
    Try downloading HP Print and Scan Dr utility from link below.
    www.hp.com/go/tools
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • 3210 Photosmart all-in-one printer

    I have a 3210 photosmart all-in-one printer. I've used this printer for 3yrs now with out a problem. I was having problems with computer being slow so I tried a fix and that led to while reloading the disc that came with printer it had a"Fatal Error". A little upset yes. Starting thinking about and I remembered when I bought my new computer I loaded all the stuff I had on my Sony Viao coputer to a laptop and transfered it to the new Dell XPS. I was hoping everything would work on the new Dell. Pretty much everthing worked. I had a online company clean my computer and tune up to be fast again. It became fast again oh yeah! Well the problem reared it ugly head the minute I push the scan button on the printer. It show an error on the little screen (no scan options)Refer to device documention to toubleshoot.I did all that stuff and I'm at a point now I've downloaded from HP an updated patch to run vista. what I realize now is when I transfered from Sony to the Dell, The Sony was running Windows 98 and my new Dell run Vista Home Premium. So as it was everything worked until now. Can anyone help me fix this?

    A lot of this computer stuff is new to me so please forgive me if it takes me awhile to run it through my brain a few times to try to understand how to use the information. Maybe I could explain where my head is now. I have a DEll XPS 420 and the software that came with it had HP printer stuff on it. Just last week I had a company clean my computer of stuff that was causing it to run and start very slow . They said I had over 700 errors in the registry include some viruses. I did find the problem till a day after when I pushed the scan button on the printer.)No Scan Options) showed up on the little screen. I call that company back an explained my problem and they took control of my computer and tried to fix it. The solution they came up with was an I-con on my desk top that when you click on it it bring the paint program up and use that or he have a much more involved procedure to try to restore it. Now I've had a few days to ponder and it comes to mind that my old Sony was running Window 98 and my Dell is using Vista home premium. My Son used his laptop downloaded everything from Sony and then downloaded everything on to the Dell. my gut tells me that the software that came with the printer when i bought the Sony it is for 98,Me,2000,XP . When I uninstalled HP and went to web site downloaded latest version for my HP 3210v all-in-one printer it come up with a fatal error. This is pretty much where I at and any help I can get I would be thankful for Mike 

  • Ink System Failed error on Photosmart All in One C7180

    I have a Photosmart All in One C7180.  I am getting the Ink System has failed....Error: 0xc05d0281 message.  I have tried all of the suggested solutions to make this go away but it seems to be a hardware failure.  Is this something that can be fixed/replaced or is the printer history?  I don't want to pay for an HP service call if this is not something that can be fixed/replaced.  Thank you for any help

    Hello there! Welcome to the forums @cleardaypdx,
    I read your post about the scanning troubles you're facing with your moms Photosmart C309a and wanted to share my suggestion with you.
    Click here to see the guide and follow the steps: 'Another program has control of the scanner' Message Displays on the Computer When Scanning
    I hope that helps, have a terrific day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Maybe you are looking for

  • How to access(connect) BI Data in webdynpro for java applications

    Hi , is there any way to access and display the BI data in portal using webdynpro for java applications like we did in Visual composer. if not how to integrate the BI data in webdynpro applications ? Regards, Govindu

  • What itunes version will work with a first generation ipod mini

    My wife has a first generation iPod mini and wants to use it but the version of iTunes that she has on her computer will not recognize it. Anyone know what she can do to be able to use this perfectly good device? What was the last iTunes version to s

  • Original serial number after migration

    Hi, This is not a new issue on these forums - but I've been through other posts, and my question remains unanswered. Ok, so I used Migration Assistant to move applications to my new Macbook Pro. And now Aperture 3 won't accept the serial number from

  • Macs Lose Active Directory Binding

    We run 10.5.8 and use Deploy Studio 1.0.rc12 for imaging. We run several Mac labs here all with basically the same image. Lately, they have been un-binding themselves from our Active Directory and we can't get them to stay reattached. We try manually

  • Make PAN field mandatory

    Hi,    In second screen of xk01one application toolbar named CIN details is there. In CIN details->withholding tax tab PAN filed is there. I want to make this field as mandatory. How can i do that. please please help me.