Grayscale with One Purple (for instance)

I have a group shot photo of my brother running in a large group of people in a marathon. I would like to make the picture grayscale, but I would like my brother to be in color. He is wearing a purple shirt, white male, brown hair...
Is this effect possible through Lightroom? I do not own Photoshop and do not plan to purchase it, if that is my only option.
Thanks.
Justin

No it isn't possible in Lightroom. You are looking at pixel level editing
using masks/selections. You need a full image editor like Photoshop or
Photoshop Elements to do this.
Robert

Similar Messages

Wifi problem: I have a airport wifi the small one with one port for modem. My Problem is airport wifi works fine however when I power off my IMac then power it up later on It does not show a connection I then have to manual do it my self it's a pain and n

I have a airport wifi the small one with one port for modem. My Problem is airport wifi works fine however when I power off my IMac then power it up later on It does not show a connection I then have to manual do it my self it's a pain and never happened before I have tried resetting the airport unit but still no luck please help.
Thank you
Roy from malden

Hi Roy, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

Working with one SLD for Dev, test

We have one SLD for dev, test enviroment.
We have 2 instance of XI(dev, test). Each XI system must be registered in SLD.
But how Adapter Engine, Integration Engine of SAP system (ABAP Proxy) will determine to with XI system to connect?
Is it right design?

hi Denis,
>>>>Is it right design?
one SLD is advisable for ALL XI instances
so don't worry it will work
refere to:
https://websmp104.sap-ag.de/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
and
720717 - Reduce the number of System Landscape Direcotries (SLD)
>>>>>SAP system (ABAP Proxy) will determine to with XI system to connect?
have a look at : SXMB_ADM -> integration engine config
do you see the address ?
you always point one r3 client to only one XI instance
here
BTW
but having one SLD and many XI server is something different
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

How do i create an animation with one frame for each layer?

I have 76 sequential images that i've loaded as layers using bridge, then aligned using photoshop.
I would now like to create a 76 frame animation with one animation frame for each layer
(the layers are in sequential order).
is there an easy way to do this
or do i have to create 76 frames (can duplicate multiple to speed it up)
then set layer visibility for each frame?
thanks
bill w
astro.whwiii.net

thanks for all the replies
got it
here's a rough draft of 2 hours of sunshine
http://whwastro.homestead.com/files/big/31-05-2014-prom-animation.gif
-bill w
astro.whwiii.net

How to Maintain Payment with one check for Multiple Vendors?

Dear Gurus,
i have a scenario for outgoing payment, here it is
i have some open items for multiple vendors. say it for open item
1. with amount 5000 USD for vendor A
2. wiht amount 10000 USD for vendor B
my company pay both open item 1 & 2 with one check, say the check no is 27382830 and the amount is 15000 USD. The check is given to the Bank as an order to Pay the vendor. so the check does not have receiver name. i attach a formal letter to the bank to ask them for making payment with that check. the letter contains a detail the amount, vendor bank account number, account holder, and the vendor name.
so how i can threat this business scenario into SAP? i want to trace check number used to pay the vendors.
hope you can give some clues. is it possible to maintain scenario above with automatic payment?
best regards,
land lord

Hi,
Yes you can map this scenario in SAP and use F110 for this. But you will also have to use some Z programs..
1. For F110 FBZP configuration, maintain outgoing bank clearing Account (this will be a dummy account and not the actual Outgoing Bank Account) as the Bank Sub Account.
By doing this when you run payment in F110, entry will be
Vendor A A/c...Dr.
outgoing bank clearing Account Cr.(1)
Vendor B A/C... Dr.
outgoing bank clearing Account Cr.(2)
2.Then you will have to use Post with clearing transaction codes and make one entry
outgoing bank clearing Account Cr.(1)..Dr.
outgoing bank clearing Account Cr.(2)..Dr.
To Bank Outgoing Account(Actual Bank outgoing Account) Cr.
3. Now, when you get the single cheque no. from Bank against both the vendors, then thru FB02, change the assignment field/Reference field for Che No. updates.
But do check BRS also for its reconciliation.. If you do it on a daily basis.. then it would not be difficult.
Hope this helps you..
Regards,
SAPFICO

MS Project and print automatically a planning per ressource with VBA code for instance

Hello, i'm in MS project 2010 and i would like to print automatically a planning per ressource (PDF) with VBA code or other quick way.
Somebody can help me with a simple macro VBA and how to install/use it?
regards,
M.

Probably oyu need the loop:
Dim Res as Resource
for each Res in ActiveProject.Resources
'Apply resource filter then print
Next Res
Rod Gill
Author of the one and only Project VBA Book
www.project-systems.co.nz

With iOS 8's family sharing, will family members be able to share apps that they previously purchased with different credit cards with one another for free (given that they will all use the same credit card once iOS 8 comes out)?

Question 1: In my family of 4, we currently have different Apple ID's and we all use different credit cards to purchase our apps and media. When iOS 8 is released, if we agree to share the same credit card, will we be able to access apps that a family member purchased with their own credit card prior to iOS 8's release? To clarify, under iOS 7, Member 1 has purchased Apps A and B with his credit card. Under iOS 8, if Members 1, 2, 3, 4 decide to use Member 4's credit card, will Members 2, 3, 4 be able to access Apps A and B?
Question 2: If we all decide to use the same credit card now, once iOS 8 is released, will family members have access to the apps/media purchased by the fourth family member?

You can read everything that is known about ios 8 on Apples website.
There is no way for anyone to know any more than that.

When I try to access certain listings on ebay they are blocked - I am told this is because it thinks I am in France. I use an English ISP and the problem only happens with Firefox, not (for instance) IE. How can I overcome this?

When I try to access certain listings on eBay I get the following message:
"Unfortunately, access to this particular listing or item has been blocked due to a Paris commercial court decision that bans trade of certain authentic perfumes and cosmetic products on eBay because of French selective distribution laws. eBay is appealing this ruling but is nevertheless required to enforce it. We are blocking your viewing in an effort to comply with this court decision. Regrettably, in some cases, we may prevent users from accessing items that are not within the scope of the decision because of limitations on existing technology."
eBay support told me it is because they think I am in France or because I am using a French ISP. I am in London and am using the British ISP, Bethere. What can I do to convince them that I am in England?
The URL quoted is just an example. It happens frequently with other listings.

This is what I get:
ISP: Be Un Limited
Organization: Be Un Limited
Connection: Broadband
Services: None Detected
City: Horsham
Region: West Sussex
Country: United Kingdom
It can't be a problem with my ISP or my IP address since it only happens with Firefox. When I try out the same listings with other browsers it doesn't happen. eBay said Firefox must be making it seem as though I am in France. Goodness knows how or why??

Magic Mouse question. I have set this in Preferences by ticking Swipe between pages with one finger and also Swipe between full-screen apps with two fingers, however when I try to do the latter, the 2 finger swipe will take me only to the dashboard and

It's a Magic Mouse question. I have set this up in Preferences by ticking Swipe between pages with one finger and also Swipe between full-screen apps with two fingers, however when I try to do the latter, the 2 finger swipe will take me from the app that I am on to the dashboard only and not to my other open apps.
I also find that Smart zoom only works with some apps, for instance not with Word docs or email.
How can I correct this please?

Just figured out it also does not work with the Mail app.

Two Computers with one iPod??? I need major help!!!!

I just got another computer, i have iTunes on my laptop with two iPods on it but i was wondering if I could set it up so that I can hook them to the new computer with the same songs and updates as the other with out it erasing my ipod. I read that u can set up ur iTunes on 5 computers that sync together somewhere but i forget.Please help
Windows XP
Windows XP

If you want to connect and use an iPod on more than one computer (For instance you have one at home and maybe a laptop or PC you use at work) you can change the update preference to "manually manage songs and playlists. By doing this, you can listen to your iPod at work where you may have iTunes but no songs on the computer. You can use as many iPods as you like on a computer, the limit of 5 computers you are referring to is the number of computers that you can have authorised at any one time to play iTMS purchases:
Using iPod with Multiple computers
Managing content manually on iPod

Make a router out of a simple notebook with one NIC (buy a second NIC)

Hello all,
Before starting, I think I must say hello to you because I'm new here : this is my first post . So, in fact, I'm working with Linux since 5 years. I'm running Gentoo on my workstation and my old server, Ubuntu on my notebook and for family, and finaly, I'm running Red Hat at work place for workstation and servers. I'm a Linux and JBoss administrator .
I've decided to run/try Arch because it seams to growth with rock-solid ideas and it's a binary distribution. I now prefer a binary distribution for my server, because it's taking too much time to let old computer or notebook compile the whole world (alone or not ...). I prefer now looking around and learn another Linux distribution. This is why I started to install my first Arch Linux : I will try to run a server on a simple notebook. In fact, it's a working machine, but without any graphics capabilities (memory has burned...), and so, perfect for a little server low consumption. I want it to replace my current server/router running Gentoo on an old Pentium 3.
For now, I've encountered these little problem :
- LID problem when screen is close : reboot never work (power off just after the BIOS, when the LID state is "screen closed"...) => disable LID connection (unplugged from motherboard)
- ssh problem => must now use "/etc/hosts.allow" to let remote machine to be connected
- try routing packet with one NIC => for now, doesn't work ...
- try to get X11 Forwarding => doesn't work too, but it will works quickly
My infrastructure is just a server/router splitting in two part for the LAN at home :
- one part is LAN with all workstations
- the other part is LAN_router which is another network with only the ADSL router to access internet
So, its looking like this : <machine1> => <switch> => <[eth1]server/router[eth0]> => <switch> => <router_ADSL> => INTERNET
All is fine ... with the old machine ... for the new one, it has only one network interface ... The question is : how to do routing with only one NIC ???
In theory, I "should" work ... but .. some component can have some little hard time to do the right things .. and for me, is not working right now.
The first try is to use one interface with one IP aliasing, like this :
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:1d:e4:a3:d5:1a brd ff:ff:ff:ff:ff:ff
inet 10.2.1.8/26 brd 10.2.1.63 scope global eth0
inet 10.2.1.66/26 brd 10.2.1.127 scope global eth0:0
inet6 fc80::21a:e2ff:fea3:d56a/64 scope link
valid_lft forever preferred_lft forever
Two sub network are used :
- 10.2.1.0/26
- 10.2.1.64/26
I must have 2 ip on one NIC, so aliasing can be used (when testing, the new server/router is able to ping a workstation and the ADSL router ; it can also use internet). I've heart there is some problem with "iptables" to set forwarding rules when using IP Aliasing ... but I prefer try myself . It doesn't work for now, probably because of this. But, is there a way to use a "workaround" ? For example, if "iptables" is not able to play with aliasing, and so, interface such as "eth0:0", may be there is a way to tell it, like this :
[root@serveurn ~]# iptables-save
# Generated by iptables-save v1.4.10 on Sun Dec 12 17:30:01 2010
*nat
:PREROUTING ACCEPT [0:0]
:INPUT ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:POSTROUTING ACCEPT [0:0]
-A POSTROUTING ! -d 10.2.1.0/26 -o eth0 -j SNAT --to-source 10.2.1.66
COMMIT
# Completed on Sun Dec 12 17:30:01 2010
# Generated by iptables-save v1.4.10 on Sun Dec 12 17:30:01 2010
*filter
:INPUT DROP [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [9:932]
-A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -p icmp -j ACCEPT
-A INPUT -s 10.2.1.0/26 -p tcp -m tcp --dport 22 -j ACCEPT
-A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
COMMIT
# Completed on Sun Dec 12 17:30:01 2010
... use the interface "eth0" (for the whole throughput) and do SNAT for all excepted for the LAN network ? But it seams to not work ...
I got a second idea : if it wan't work with aliasing ... may be can I use virtual interface and bridge ... create a bridge with "eth0" and "tap0" so I can add more than one ip in the machine .. and may be, will be able to route packet from these two interface ???
But for now, I have to understand why X11 Forwarding don't work ...
EDIT: xorg problem solved : xorg-auth was requested ...
Last edited by loopx (2011-01-09 18:08:28)

fukawi2 wrote:" ...it is dirty and nasty and shouldn't be done unless you're stuck on a deserted island and your only hope of rescue is building a router out of 2 coconuts, a sea shell and a single NIC that was washed up on the beach in the last storm. "
PRICELESS !!
@loopx: Honestly: return the USB NIC you just got, buy a compatible device(maybe an asus rt-n16) and install dd-wrt. You'll be a lot happier....
Last edited by Daniel_F (2011-01-10 00:34:08)

Partition an Advanced Format drive with 4KB sector (for Linux OS only)

I got a brand new WD 1TB drive, model WD10EZEX, I'm upgrading from an old 500 GB drive with Arch running on it, and I'm going to make a fresh Arch install on it.
I suddenly learned about all this Advanced Format issue, with the first units "lying" about physical sector size and all that stuff, which started like 2 years ago and I was not aware of.
I couldn't find a step by step guide to perform the proper formatting for a fresh Linux OS install with 4KB-sector, despite the info is out there scattered in tons of blogs, forums, etc.
I figured out the steps for my simple setup, and I'd like to know if everything is all right. For the ones who already know the steps, can you please go to the bottom of the post, and tell me if the final setup is all right to start the fresh install ?? I reproduce all the steps hoping that this will help other people in the future.
I'll use the whole drive only for an Archlinux install, with one partition for the / and another for /home.
Seems the GPT modern method is the way to go, and the gdisk tool will do the trick. If we are booting from this drive, with GRUB2 in a BIOS system, we must also create a BIOS Boot Partition.
So, with the drive having no partitions at all, and sda being the device name
# gdisk /dev/sda
Command (? for help): p
Disk /dev/sda: 1953525168 sectors, 931.5 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 6527769B-B4BC-408C-A45B-D2DAA4036620
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1953525134
Partitions will be aligned on 2048-sector boundaries
Total free space is 1953525101 sectors (931.5 GiB)
Number Start (sector) End (sector) Size Code Name
we create the 2 MiB BIOS Boot Partition
Command (? for help): n
Partition number (1-128, default 1): 1
First sector (34-1953525134, default = 2048) or {+-}size{KMGTP}: 2048
Last sector (2048-1953525134, default = 1953525134) or {+-}size{KMGTP}: +2M
Current type is 'Linux filesystem'
Hex code or GUID (L to show codes, Enter = 8300): ef02
a 45GB partition to use as /
Command (? for help): n
Partition number (2-128, default 2):
First sector (34-1953525134, default = 6144) or {+-}size{KMGTP}:
Last sector (6144-1953525134, default = 1953525134) or {+-}size{KMGTP}: +45G
Current type is 'Linux filesystem'
Hex code or GUID (L to show codes, Enter = 8300): 8300
Changed type of partition to 'Linux filesystem'
and the rest to use as /home
Command (? for help): n
Partition number (3-128, default 3): 3
First sector (34-1953525134, default = 94377984) or {+-}size{KMGTP}:
Last sector (94377984-1953525134, default = 1953525134) or {+-}size{KMGTP}:
Current type is 'Linux filesystem'
Hex code or GUID (L to show codes, Enter = 8300): 8300
Changed type of partition to 'Linux filesystem'
we can check the setup
Command (? for help): p
Disk /dev/sda: 1953525168 sectors, 931.5 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 6527769B-B4BC-408C-A45B-D2DAA4036620
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1953525134
Partitions will be aligned on 2048-sector boundaries
Total free space is 2014 sectors (1007.0 KiB)
Number Start (sector) End (sector) Size Code Name
1 2048 6143 2.0 MiB EF02 BIOS boot partition
2 6144 94377983 45.0 GiB 8300 Linux filesystem
3 94377984 1953525134 886.5 GiB 8300 Linux filesystem
and everything looks fine, we have the multiples of 8 starting sectors, so we write the changes
Command (? for help): w
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING PARTITIONS!!
Do you want to proceed? (Y/N): y
OK; writing new GUID partition table (GPT) to /dev/sda.
The operation has completed successfully.
now we need to give the / and /home partitions a format, I choose ext4 and ask for a 4096 block size just in case we have a "lying" unit (not my case but I prefer to write down the most general command)
# mkfs.ext4 -b 4096 /dev/sda2
mke2fs 1.42.6 (21-Sep-2012)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
2949120 inodes, 11796480 blocks
589824 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=4294967296
360 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
and the same thing for /dev/sda3 .
Check with gdisk and parted that everything is fine, is this all right to start the install ??
# gdisk -l /dev/sda
GPT fdisk (gdisk) version 0.8.5
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Disk /dev/sda: 1953525168 sectors, 931.5 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 6527769B-B4BC-408C-A45B-D2DAA4036620
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1953525134
Partitions will be aligned on 2048-sector boundaries
Total free space is 2014 sectors (1007.0 KiB)
Number Start (sector) End (sector) Size Code Name
1 2048 6143 2.0 MiB EF02 BIOS boot partition
2 6144 94377983 45.0 GiB 8300 Linux filesystem
3 94377984 1953525134 886.5 GiB 8300 Linux filesystem
# parted /dev/sda
GNU Parted 3.1
Using /dev/sda
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print
Model: ATA WDC WD10EZEX-00R (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1049kB 3146kB 2097kB BIOS boot partition bios_grub
2 3146kB 48.3GB 48.3GB ext4 Linux filesystem
3 48.3GB 1000GB 952GB ext4 Linux filesystem
Last edited by karamaz0v (2012-12-06 06:39:45)

Your partitions look fine from an Advanced Format point of view. The test is simple: Are all your partitions' start points, as measured in sectors, divisible by 8? Yours are.
karamaz0v wrote:what confused me a bit, was that I saw a lot of setups with the BIOS boot partition, and also a 200 MB EFI one. Having a BIOS system, I think I don't need the EFI one.
Some people do this because they're unclear of their requirements. Others do it because they want to have the option of switching boot modes between BIOS/legacy and EFI. With both types of boot loader installed, you can choose on a boot-by-boot basis which way to start the computer, assuming it supports both boot modes.

How to convert the table with separate fields for every period

Hi there,
I have the table in R/3 called COSP. The table contains the separate fields for values of separate reporting periods, let's say Amount01, Amount02 etc. I need to extract this data to BW and load it into ODS, which contains the data like common key figure for amount and info object Fiscal Period. How to extract and tansform the data to be able to load it there?
I mean, how to change the row like:
100 100 200 200....
for rows like:
001 100
002 100
003 200
004 200
I hope you'll help,
Kooyot

Hi,
you need to implement a bit of coding for that.
With the 'do varying' statement abap provides a loop over those fields. Within this loop you can build up a new internal table with one entry for each period and amount.
kind regards
Siggi
PS: I am not very familiar with CO, but I guess there will be a standard extractor for that.

Export as PDF with embedded profiles for Grayscale images

Does InDesign CS6 export pages with Grayscale images as PDF with embedded profiles?
Possible profiles, for instance:
– Gamma 2.2
– Dot gain 20%
– Black Ink ISO Coated v2 (ECI)
Export mode:
– Acrobat 5 or higher
– No color conversion
– Embed all profiles
Test by Acrobat Pro
Advanced > Print production > Preflight > PDF analysis > List objects using ICC/Lab/Calibrated Color
[The question is not about the export of Color images as Grayscales]
Best regards --Gernot Hoffmann

I wouldn't ever use different RGB profiles and different CMYK profiles and
different Gray profiles in one doc – it's just necessary for tests.
If you had a hypothetical case where your InDesign document's assigned CMYK profile and intended output was ISOcoated_v2_300_eci and you recieved grayscales for placement with different gray profiles assigned, I think you would have to make the conversion in Photoshop if you want the grayscales to be converted to your ISOcoated_v2_300_eci output intent space.
So in this case I have a grayscale image with Dot Gain 10% assigned and you can see the 50% patch is reading as 50% in Info panel:
If set my Working Gray space to the ISO Coated profile as above and do a Convert to Profile with the Destination set to Working Gray:
The preview doesn't change but I get converted gray values—50% is now 44%:
If I place the grayscale in an InDesign doc with ISOcoated_v2_300_eci assigned as the CMYK profile, the preview won't change (you have to turn on Overprint /Sep Preview), and the converted numbers will show in Separation Preview. The preview and numbers will also be unchanged in Acrobat if you export to default PDF/X-4

Slave instance can not synchronized with the master for a long time

Hi,
Slave instance can not synchronized with the master for a long time, and the gap of LSNs between slave and master are more and more larger. The transfer bytes per second between master and slave is 118MB/s , upper limit to the ethernet card. Why???
ENVIRONMENT:
1. A network program which we called mcdb is based on BDB 4.8.30. It is used to accept get/set requests and then query data from bdb or save data to bdb.
2. mcdb implements replication with bdb replication manager api. The default start replication policy is DB_REP_ELECTION, rep ack policy is DB_REPMGR_ACKS_ONE_PEER and rep priority is 100.
3. The bdb data files, bdb log files, region files and rep files are all in the same home directory.
4. There are two instances of the mcdb are separately on two standalone servers which has no other programs. These two instances are in one replication group which can elect a master automatically.
5. The master instance is online, which has lots of requests (get, set, delete).
ACTIONS:
1. Start two mcdb instances on two servers and the two instance make a replication group. Slave has already synchronized with the master.
2. Stop the slave for a long time (more than 20 hours).
3. Start the slave instance to synchronize data with master.
RESULT:
1. the gap of LSNs between slave and master are more and more larger.
2. db_stat of master and slave:
master db_stat:
467170     Number of PERM messages not acknowledged
9245     Number of messages queued due to network delay
172415     Number of messages discarded due to queue length
25880     Number of existing connections dropped
3407     Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.146 (eid: 0, port: 30011)
Environment configured as a replication master
331726/3574994     Next LSN to be used
0/0     Not waiting for any missed log records
328872/466092     Maximum permanent LSN
0     Next page number expected
0     Not waiting for any missed pages
0     Number of duplicate master conditions originally detected at this site
2147M     Current environment ID (2147483647)
100     Current environment priority
49     Current generation number
50     Election generation number for the current or next election
2323     Number of duplicate log records received
0     Number of log records currently queued
6768     Maximum number of log records ever queued at once
55284     Total number of log records queued
120M     Number of log records received and appended to the log (120475988)
111     Number of log records missed and requested
2147M     Current master ID (2147483647)
2     Number of times the master has changed
0     Number of messages received with a bad generation number
8505306     Number of messages received and processed
12     Number of messages ignored due to pending recovery
471869     Number of failed message sends
12M     Number of messages sent (12959945)
0     Number of new site messages received
1     Number of environments believed to be in the replication group
990543     Transmission limited
0     Number of outdated conditions detected
0     Number of duplicate page records received
0     Number of page records received and added to databases
0     Number of page records missed and requested
Startup complete
6244678     Number of transactions applied
0     Number of startsync messages delayed
1     Number of elections held
1     Number of elections won
No election in progress
0.057097     Duration of last election (seconds)
8944103     Number of bulk buffer sends triggered by full buffer
0     Number of single records exceeding bulk buffer size
5273M     Number of records added to a bulk buffer (5273592170)
10M     Number of bulk buffers sent (10490865)
0     Number of re-request messages received
0     Number of request messages this client failed to process
0     Number of request messages received by this client
slave db_stat:
0     Number of PERM messages not acknowledged
0     Number of messages queued due to network delay
0     Number of messages discarded due to queue length
1454     Number of existing connections dropped
0     Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.147 (eid: 0, port: 30011)
Environment configured as a replication client
329544/2916048     Next LSN expected
330433/2013808     LSN of first log record we have after missed log records
329543/5500501     Maximum permanent LSN
0     Next page number expected
0     Not waiting for any missed pages
0     Number of duplicate master conditions originally detected at this site
2147M     Current environment ID (2147483647)
100     Current environment priority
49     Current generation number
50     Election generation number for the current or next election
5256M     Number of duplicate log records received (5256599432)
3925284     Number of log records currently queued
3925285     Maximum number of log records ever queued at once
4880561     Total number of log records queued
3578038     Number of log records received and appended to the log
1912297     Number of log records missed and requested
0     Current master ID
1     Number of times the master has changed
0     Number of messages received with a bad generation number
12M     Number of messages received and processed (12980442)
2     Number of messages ignored due to pending recovery
0     Number of failed message sends
1912307     Number of messages sent
0     Number of new site messages received
0     Number of environments believed to be in the replication group
0     Transmission limited
0     Number of outdated conditions detected
0     Number of duplicate page records received
0     Number of page records received and added to databases
0     Number of page records missed and requested
Startup incomplete
110568     Number of transactions applied
80     Number of startsync messages delayed
0     Number of elections held
0     Number of elections won
No election in progress
0     Number of bulk buffer sends triggered by full buffer
0     Number of single records exceeding bulk buffer size
0     Number of records added to a bulk buffer
0     Number of bulk buffers sent
0     Number of re-request messages received
0     Number of request messages this client failed to process
0     Number of request messages received by this client
Edited by: 899585 on 2013-1-4 下午10:54
Edited by: 899585 on 2013-1-4 下午10:55

Hi,
Unfortunately, this issue is beyond the level of what is supported over the forum. Performance related issues are extremely complex and require an in-depth understanding of your environment and dedicated support. In a generic sense, you can look at this as a basic queueing problem. You have a server that went down and work is still coming in. When the server gets started it is possible that it may never catch up depending on new work coming in and the rate at processing the old work.
So what would you do in this case --- one thing would be to reduce the new work coming in. In HA terms this would be slowing the master down and you can increase DB_REP_ACK_TIMEOUT for this. Another thing you could do is add fresh servers to help reduce the workload. In HA terms, this would be the equivalent of restarting the client and give it a fresh look at everything. Another thing you could do is replan the system and load balance. In HA terms, it would mean something like take a hot backup of the master and reinit a client from scratch.
If you are interested in getting a dedicated support person working on this concern, please let me know and we can move forward down that path. Just respond to the thread with your email address and I will get in contact with you so we can pursue that approach.
thanks
mike

Grayscale with One Purple (for instance)

Similar Messages

Maybe you are looking for