GRC 10.1 Access Request - Provisioning Logs Not Available

Hello guys,
I am currently running into an issue with the user provisioning logs, the Request Approval notification which is sent to the user are at the end of an approved access request are as below and the Provisioning Logs tab is throwing a timeout error when opened.
"Hi Varsha Upadhyay (B001193),
The Request number : 26 , has been processed and the Request is Closed. The details are as follows:
Provisioning failed; check provisioning log for details.
Kind regards,
Access Control Administrator "
I have checked the table 'GRACREQPROVLOG' and I see the logs available in the table, When I open the logs for a particular request no I see the below error message under the 'Prov Message' field
"Type conflict when calling a function module (field length)"
Similarly in SLG1, I find the following message at the end of each provisioning task that has taken place at the end of a request being approved.
"Error in RFC; 'Type conflict when calling a function module (field length)'.
I made sure I gave SAP_ALL to all the RFC ID's and also the WF-BATCH ID's, and the integration scenarios are also defined correctly for all the target system.
It seems that this error is just preventing the provisioning details from being displayed in the email or in the Provisioning logs, but the user provisioning has actually taken place as expected (viewed in SU01).
So i'm wondering even after provisioning has actually taken place successfully, why would this error occur. Does anyone know the source for this error message, please let me know what am I missing?

Hi Narsimha,
The error seems to be associated with wrong type being passed as a parameter to a function module.
Can you check the field mapping for your connectors in SPRO? There might be a mismatch happenning there.
Thanks
Sammukh

Similar Messages

GRC Access requests - Audit Log

Dear All, GRC access requests is noticed with Provisioning failed messages. Access Request Audit Log is displayed with " Log on Failed / CPI - CALL: ThSAPCMRCV " message ( Screen shot enclosed ). Could you please share an insight on these messages and it's resolution. Thanks raj

Dear Raj,
please check with your basis team if the connection to the system works. Basically it seems like you have a connection error as the log on does not work.
Regards,
Alessandro

GRC 10.0 Access request Management Audit

Hello All,
Can Anyone let me know what Auditors Check When they Audit GRC 10.0 Access request Management (excluding Configuration).
Thanks
Mohammed Wasim

Hi,
ARM supports key ITGC controls for user access management, so probably audit would also cover:
- review of updated processes & controls
- check (based on sample) if all requests were properly approved
- review of correctness of approvers assignment
- verification if what was requested was provisioned
- timely removal of terminated access
- review of SoD controls embedded in process
- periodic review of user access
and maybe some more controls. In most cases it will be sample based testing so auditors may ask for a sample of requests to trace them to back-end systems and opposite sample of changes in users privileges to verify if proper requests were prepared for those changes...
Sometimes they could perform more tests on configuration and process, but this is up to particular auditor.
Best regards, Andrzej

Va42 item billing plan, incompletion log,T185-requested func FEBA not avail

Va42 item billing plan, incompletion log,T185- error "requested func FEBA not available here"
We have created new entries in the T185 table to enable the imcompletion log to go to the billing plan tab in the sales contract. However, when I click on the green back arrow, I get the above error.
Can someone give me an idea of the cause of the error and if there is a how-to manual on creating new screens, new flow control, and debugging methods for the incompletion log?
I am creating incompletion log entries for the billing plan in the sales contract at the item level. We have modified the special rules table RV45A_UV to add the additional check fields.
Can I add additional check tables to the TVUVF table?
Here are the entries I created in T185:
SAPMV45B,PFPL,FL,,,*,P0,PFPL,ENT1,T,0
SAPMV45B,PFPL,K0,,,*,P0,PFPL,ENT1,T,0
SAPMV45B,PFPL,P0,,,*,P0,PFPL,ENT1,T,0
SAPMV45B,PFPL,PX,,,*,P0,PFPL,ENT1,T,0
SAPMV45B,PFPL,U0,,,*,P0,PFPL,ENT1,T,1
Thanks
Paul

sorry. tis may not be correct forum.

On i-pad, when try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no my request and item not available in the U.S. store. WWJD?

On i-pad, when I try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no to my request and, "item not available in the U.S. store." My Mac will not use update iTunes to any later version than the one I have because my os is also out of date, but when I try to update that i cant, so what do I have to do? Please don't tell me I have to buy a new Mac to be up to date.

On the iOS device you must be logged into the store with the exact same Apple ID you used to originally purchase the service. Go to Setting > iTunes & App Stores and if necessary sign out/in and then enable iTM.

404 'the requested resource is not available'

Hi All,
We created a KM iview and accessing Flash file. Some users are able to see the iview without error. Some users are getting 404 'the requested resource is not available' Error. They are not able to see the flash file in portal.
Can anyone advise me what the problem is and resolution steps for this?
Thanks,
Srinivasu.Y

Hi Srinivasu,
Well you already have lots of valid suggestions above but this problem might be causing for various reasons. As you have already checked the permissions for the set of the users having this problem, it might be worth checking if there are many nodes of the server instance and if any of these are not working properly. It can happen that when those set of users are trying to access the resource, the request is hitting specific server nodes which is unable to find the resource for some reasons. You can try asking the users to clear their browser cache and try again so that when the users try to access the same resource again it might go to different node this time.
But probably this is a temporary solution that might work as has worked in my case but there might be problem with some server nodes which is worth looking at.
Hope it helps.
Regards,
Gourav

DMS BP giving 'requested resource is not available' error

Hello, smart KM people
I'm having a problem with our DMS business package in our EP6 SP16 portal. I configured the DMS repository manager successfully.. and the Document Explorer workset is functional and I'm able to navigate through the folder structure and see the documents listed that are located in the DMS. However, the problem comes in when I click on one of the documents to view it. When I click on the document, I get a "404 - The requested resource is not available" error.
What would be the cause of this? Permissions seem to be set correctly... I'm able to navigate through the folder structure and see the list of documents. If I access the DMS through SAPGUI, I'm able to view the documents without a problem. Has anyone had this problem in the past, or have any hints about what configuration to troubleshoot?
Thanks in advance for the help!
Cheers,
Fallon

Hello Samta -
I followed your steps and am still receiving the same error, so it must not be a problem with the logon ticket. And when I went to the Component Monitor, the DMS Repository Manager looked just fine.
Julian, here's the stack trace I found when viewing the source of the 404 error:
        com.sapportals.wcm.protocol.webdav.server.WDServletException: resource not available
     at com.sapportals.wcm.protocol.webdav.server.WDGetHandler.setContentLocation(WDGetHandler.java:756)
     at com.sapportals.wcm.protocol.webdav.server.WDGetHandler.internalHandle(WDGetHandler.java:495)
     at com.sapportals.wcm.protocol.webdav.server.WDGetHandler.handle(WDGetHandler.java:253)
     at com.sapportals.wcm.protocol.webdav.server.WDServlet.doGet(WDServlet.java:777)
     at com.sapportals.wcm.protocol.webdav.server.WDServlet.service(WDServlet.java:458)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
     at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:331)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
     at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java(Compiled Code))
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code))
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code))
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java(Compiled Code))
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code))
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java(Compiled Code))
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:545)
     at java.security.AccessController.doPrivileged1(Native Method)
     at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java(Compiled Code))
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java(Compiled Code))
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Inlined Compiled Code))
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Compiled Code))
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java(Compiled Code))
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java(Compiled Code))
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java(Inlined Compiled Code))
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java(Compiled Code))
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code))
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
     at java.security.AccessController.doPrivileged1(Native Method)
     at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
Any hints from this? We keep running up against brick walls with this problem.
Thanks for your help!

"The item you've requested is currently not available in the Indian Store"?

I am getting this message at iTunes Store " "The item you've requested is currently not available in the Indian Store"? " , so unable to connect with iStore .
Also My iPhone 4s is not getting connected with iTunes .
Please help on this..

Sorry. You're still not making sense.
I am able sign in there but not able to access iTunes at all.
Sign in where?
I need to access Homepage of iTunes . But whenever i click to any of the option at iTunes I get the above message .
Click what "option"?

HT201272 Under purchased items in the APP Store, it say that the item you have requested is currently not available in the US store. The item in question is Mountain Lion OS X

Under purchased items in the APP Store, it say that the item you have requested is currently not available in the US store. The item in question is Mountain Lion OS X which I have already paid for. Any ideas to retrieve this?

When you submit a podcast you should get an email acknowledging the submission. If you subsequently submit it again you will get an error message saying that it's already been submitted.
It then has to be assessed by a real person, which can take some time - a couple of weeks seems to be common, but it can be longer: however since March seems an unreasonably long time.
When it's accepted (or rejected) you should get an email saying so, in the first case giving you a link to the Store page.
More than that I can't tell you: obviously I don't have access to the inner workings of the Store. You could try asking Support, but I have to say you probably won't get a helpful answer. Go to http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'. You will see a link to either 'Express Lane', which will guide you eventually to some contact options, or you may see a link to email them.

The page you requested is currently not available. Please try again later .

The message occurs, when I try to view a message from my PC. On other PCs the problem does NOT occur.
Original message:
" The page you requested is currently not available. Please try again later ...
If you have questions, please send email to [email protected]
For more information on the Oracle Collaboration Suite features, please refer to Oracle Technology Network"
Pls help.
Borys Lubera

is this related to collab suite. if ys pls post in collab suite forum. this is reports forum

Requested circuit/channel not available

Hello,
I have a problem with a PRI link. We have installed CCM 3.3(3) and a 3745 with a PRI link to the telco. The 3745 is configured as a MGCP gateway. When I try to initiate an outbound call, I get the following Q931 debug message:
*Mar 1 01:47:14.967: ISDN Se3/0:15 Q931: TX -> SETUP pd = 8 callref = 0x0005
Bearer Capability i = 0x8090A3
Standard = CCITT
Transer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9839F
Exclusive, Channel 31
Calling Party Number i = 0x0081, 'XXXXXXX'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, 'XXXXXXXXXX'
Plan:Unknown, Type:Unknown
*Mar 1 01:47:15.127: ISDN Se3/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x8005
Cause i = 0x82AC - Requested circuit/channel not available
When I try an inbound call I get a busy signal, and a similar debug message (if I use another router to initiate that ISDN call).
This is the "show ISDN state" screen:
ISDN Serial3/0:15 interface
dsl 0, interface ISDN Switchtype = primary-net5
L2 Protocol = Q.921 L3 Protocol(s) = CCM-MANAGER
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0xFFFF7FFF
Number of L2 Discards = 1, L2 Session ID = 13
So I presume there is nothing wrong with the signalization??
I contacted the telco person, and he told be that he sees some kind of BLOCKING state on our side of the PRI link.
Please help or give at least some guidelines what to try next!
Thanks in advance...

Haha, 11 years later this post save us on CUCM 8.6.2, disabled "Inhibit restarts at PRI initialization" Works Excellent on the E1 affected.
THANKS A LOOOT.

Http Status 404, The Requested resource is not available

Dear Friends,
I am getting error with my tomcat that " The Requested resource is not available"
Kindly help me , What is the wrong with my code.
I am using Eclipse 6.0.1, Tomcat 5.5.20, jdk 1.5.0, j2sdk 1.4.0
My application is just to print user datas and my files are
*1. login.jsp*
<html>
<head>
<title>login Page </title>
</head>
<body>
<form action="login" method="post">
<table>
     <tr>
     <td>UserName</td><td><input type="text" name="username"/></td>
     </tr><tr>
     <td>Password</td><td><input type="password" name="password"/></td>
     </tr>
     <tr><td><input type="submit" value="login"/>
     </tr>
</table>
</form>
</body>
</html>
*2.web.xml*
<web-app>
<servlet>
     <servlet-name>login</servlet-name>
     <servlet-class>login</servlet-class>
</servlet>
<servlet-mapping>
     <servlet-name>login</servlet-name>
     <url-pattern>/login</url-pattern>
</servlet-mapping>
</web-app>
*3. login.java*
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class login extends HttpServlet
     public void doPost(HttpServletRequest req, HttpServletResponse res)
          try
          PrintWriter out = res.getWriter();
          String name = req.getParameter("username");
          String password = req.getParameter("password");
          out.println(name+" servlet page");
          }catch(Exception e)
          e.printStackTrace();
File Directory:
Myapp
! !-->src
! ! !--> login.java
! !-->WebRoot
! !--> META-INF
! !--> WEB-INF
! !--> Classes
! !--> login.class
! !--> lib
! !--> web.xml
-->login.jsp
CATALINA_HOME C:\Program Files\Apache Software Foundation\Tomcat 5.5
CLASSPATH C:\Program Files\Apache Software Foundation\Tomcat 5.5\common\lib\servlet-api.jar;C:\Program Files\Apache Software Foundation\Tomcat 5.5\common\lib\jsp-api.jar
path C:\Program Files\Java\jdk1.5.0_05\bin;C:\Program Files\Apache Software Foundation\Tomcat 5.5\bin;C:\j2sdk1.4.0\bin
Please anyone give me the solution to solve my problem.
Thank you

Try moving your class file to a package
<servlet-class>com.logon.login</servlet-class>
! !-->src
! ! !-->com
          ! !-->logon
                    ! !--> login.java

[TOMCAT] [SERVLET] : The requested resource () is not available.

Hi!! I'm looking for an answer to my problem, and I'm going to explain what I mean.
I've created a .jar named yuhuuTunnel.jar that has the following structure:
yuhuuTunnel.jar:
--> web (contains the servlets)
      --> *.class
      --> HelloWorldServlet.class
--> META-INF
      --> MANIFEST.MF
--> SimpleClient.classThe code of HelloWorldServlet.java is this:
    package web;
    import java.io.IOException;
    import java.io.PrintWriter;
    import javax.servlet.http.HttpServlet;
    import javax.servlet.http.HttpServletResponse;
    import javax.servlet.http.HttpServletRequest;
    import javax.servlet.ServletException;
    import javax.servlet.ServletConfig;
    public class HelloWorldServlet extends HttpServlet {
        public void init(ServletConfig config) throws ServletException {
            super.init(config);
        public void doGet( HttpServletRequest request, HttpServletResponse response )
                throws ServletException, IOException {
            doPost(request, response);
        public void doPost( HttpServletRequest request, HttpServletResponse response)
                throws ServletException, IOException {
            response.setContentType("text/html");
            PrintWriter out = response.getWriter();
            out.println("<html>");
            out.println("<body>");
            out.println("<body bgcolor=\"white\">");
            out.println("<h1>Yuhuu Servlet!</h1>");
            out.println("</body>");
            out.println("</html>");
    }then, using a .war file (created with ANT), I've created into /../tomcat/webapps/ a directory call yuhuuTunnel that has this structure:
    /webapps/
          --> yuhuuTunnel
                --> WEB-INF
                        --> web.xml
                        --> lib
                             --> yuhuuTunnel.jar
                --> META-INF
                        --> MANIFEST.MF
                             --> yuhuuTunnel.jar
                --> index.htmlThe content of web.xml is the following:
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN" "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
    <web-app>
        
        <servlet>
             <servlet-name>HelloWorld</servlet-name>
             <servlet-class>web.HelloWorldServlet</servlet-class>
             <load-on-startup>0</load-on-startup>
        </servlet>
        <servlet-mapping>
             <servlet-name>HelloWorld</servlet-name>
             <url-pattern>HelloWorld</url-pattern>
        </servlet-mapping>
    </web-app>Tomcat works correctly ( http://localhost:8080 return me the page of tomcat ) but when I try to use the HelloWoldServlet typing http://localhost:8080/yuhuuTunnel/HelloWorld into a browser, this one returns me the HTTP Status 404 - The requested resource () is not available.
What is wrong? The address that I type into the browser or there's an error into web.xml?
Something interesting: If I type
http://localhost:8080/yuhuuTunnel/HelloWorld
the message given back is: "The requested resource () is not available."
but if I type
http://localhost:8080/HelloWorld the message is different:
"The requested resource (/HelloWorld) is not available."

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN" "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>

<servlet>
         <servlet-name>HelloWorld</servlet-name>
         <servlet-class>web.HelloWorldServlet</servlet-class>
         <load-on-startup>0</load-on-startup>
</servlet>
<servlet-mapping>
         <servlet-name>HelloWorld</servlet-name>
         <url-pattern>HelloWorld</url-pattern>
</servlet-mapping>
</web-app>Please change the servlet url pattern from
<url-pattern>HelloWorld</url-pattern>to
<url-pattern>/HelloWorld</url-pattern>in servlet mappings
REGARDS,
RaHuL

Error after Installing PDK - (404 The requested resource is not available)

Hi
I recently installed my PDK over my existing Portal 6.0 using SDM Tool. I downloaded PDK_6.0.14.0_BusinessPackage from SDN. I deployed pdkcontent6.0.14.0.SCA file using the SDM Tool. It installed successfully. But when i go and check the links under 'Portal Content Development ' , it gives me a 404 - The requested resource is not available.
Please help out.
Regards,
Murali.

Hi All,
I am also unable to deploy pdkcontent6.0.14.0.sca completely. I get the exception below
===========================================================================
Deployment started Thu Jun 22 11:01:34 IST 2006
===========================================================================
Starting Deployment of TutWD_KMBrowser
Finished with warnings: development component 'TutWD_KMBrowser'/'local'/'LOKAL'/'0.2005.11.09.09.51.44', grouped by software component 'pdk-content'/'com.sap'/'SAP AG'/'1000.630.0.1.0.20051130181343':
Caught exception during application startup from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while starting application local/TutWD_KMBrowser and wait. Reason: Clusterwide exception: server ID 309660150:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application local/TutWD_KMBrowser cannot be started. Reason: it has hard reference to resource com.sap.km.application with type application, which is not active on the server.
     at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToApplication(ReferenceResolver.java:596)
     at com.sap.engine.services.deploy.server.ReferenceResolver.processMakeReference(ReferenceResolver.java:399)
     at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:328)
     at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:178)
     at com.sap.engine.services.deploy.server.application.StartTransaction.begin(StartTransaction.java:147)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:327)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:111)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:230)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4705)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4610)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4583)
     at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception while starting: sap.com/com.sap.km.application', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Exception while starting: sap.com/com.sap.km.application
     at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.prepareStart(PortalRuntimeContainer.java:527)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4359)
     at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToApplication(ReferenceResolver.java:588)
     ... 21 more
Caused by: com.sap.engine.services.deploy.container.DeploymentException: <Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception while starting: SAPJ2EE::local/TutWD_KMBrowser', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Exception while starting: SAPJ2EE::local/TutWD_KMBrowser
     at com.sap.portal.prt.sapj2ee.SAPJ2EEPortalRuntime.getAndStartSAPJ2EEApplicationItem(SAPJ2EEPortalRuntime.java:886)
     at com.sap.portal.prt.sapj2ee.PortalRuntimeContainer.prepareStart(PortalRuntimeContainer.java:511)
     ... 23 more
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: [ExternalApplicationItem.prepare]: SAPJ2EE::local/TutWD_KMBrowser
     at com.sapportals.portal.prt.core.broker.ExternalApplicationItem.prepare(ExternalApplicationItem.java:188)
     at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:232)
     at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.start(SAPJ2EEApplicationItem.java:192)
     at com.sapportals.portal.prt.service.sapj2ee.Mediator.getAndStartExternalApplication(Mediator.java:132)
     at com.sap.portal.prt.sapj2ee.StartPortalApplication.coreRun(StartPortalApplication.java:59)
     at com.sap.portal.prt.sapj2ee.SAPJ2EEPortalRuntime.getAndStartSAPJ2EEApplicationItem(SAPJ2EEPortalRuntime.java:882)
     ... 24 more
Caused by: com.sapportals.portal.prt.core.broker.PortalApplicationNotFoundException: Could not find portal application com.sap.km.application
     at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java:415)
     at com.sapportals.portal.prt.core.broker.ExternalApplicationItem.prepare(ExternalApplicationItem.java:180)
     ... 29 more
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment of TutWD_KMBrowser finished with Warning (Duration 9504 ms)
Starting Deployment of pdk-content
Finished with warnings: software component 'pdk-content'/'com.sap'/'SAP AG'/'1000.630.0.1.0.20051130181343':
No further description found.
Deployment of pdk-content finished with Warning (Duration 1152 ms)
===========================================================================
Deployment ended Thu Jun 22 11:01:47 IST 2006
===========================================================================
Please resolve this issue.
Regards,
Amjad

ESS/MSS - Error " 404, The requested resource is not available."

Hi
I have deployed below archives in the EP 7.0 SP14 system. My back end system is ECC 6.0 with SP14.
1)BP ERP05 ESS 1.0 with sp14
2)BP ERP05 MSS 1.0 with sp14
3)SAP ESS 600 with sp14
4)SAP MSS 600 with sp14
5)SAP PCUI_GP 600 with sp14
We are getting " The requested resource is not available." error after clicking on
Working Time tab.
Can anyone suggest me whether i need to update any higher level patches from EP and ERP side ?
Or what could be the problem ?
Thanks in Advance,
Vinay

Hi Vinay
Check below steps one by one for your application.Whch is very helpful link.
http://help.sap.com/saphelp_erp2004/helpdata/en/38/e8584c2a664547b60442646bee23b6/frameset.htm
Regards
-SS

GRC 10.1 Access Request - Provisioning Logs Not Available

Similar Messages

Maybe you are looking for