GRC 10.1 Integration with PI 7.4 and BODS?

Hi Experts,
As per our system design we have to configure workflow for termination of users in SAP PI 7.4 and BODS system through GRC 10.1.
Can someone share the connection steup instruction for the above systems?
Thanks,
Trinetra

Check the Operation mapping,like what is anbound interface and outbound interface, these details should match with interface determination details(outbound interface details).if you have configured perfectly then it will show the operation mapping.
still if you have a problem then better to refresh the cache,it will solve the problem.even you can manually type the operation mapping name in Interface determination,and test end to end.
if it is also not working out,then create one interface copy objects from two name sapces  http://sap.com/xi/EBP
, http://sap.com/xi/SRM-MDMCatalog . and finish ESR and and finish ID too..
Regards,
Raj

Similar Messages

  • Groupware Integration with Third party Email and calendar server

    Hi All,
    We are trying to integrate email, calender and other standard collaboration features with EP7.0.
    As per the standard provided by SAP, only Lotus Notes and Exchange transports are provided by SAP.
    I would appreciate if some one can guide on how to go about integration this collaboration features with thrid party email and calendar servers other than MS Exchange and Lotus notes.
    I have this link but it does not provide information in more detail.
    https://media.sdn.sap.com/html/submitted_docs/nw_kmc/howto/coll/How%20To%20Build%20a%20Groupware%20Connector.html
    Appreciate your help
    Regards
    PN

    Dear All.
    Appreciate if any one can provide pointers in the right direction.
    Thanks
    PN

  • Need Urgent Help on Meeting Place Integration with CUCM 7.1 and AS5400 PSTN Gateway

    Hi,
    This is first time I am on this forum.
    I have already tried going through a lot of docs on docwiki.cisco.com but couldn't find complete configuration help.
    I have to integrate Meeting Place 8.X with an existing CUCM and an E1 gateway (PSTN Gateway) AS5400.
    The CUCM is already part of a Telepresence Environment. I need to create a SIP trunk between AS5400 and CUCM 7.1 and then create a Trunk between AS5400 and Cisco Unified MP 8.X and then between CUMP and CUCM.
    I need help on AS5400 SIP Configs as well as parameters I need to cover on CUCM (Though I have done some basic dial-peer configs but they haven't been of much help).
    Then I also need help on AS5400 SIP configs with CUMP 8.0
    Any docs on Integration between CUMP and TP3000 will be of great help too.
    Rgds,
    Asim

    I can get the Ricoh to register as sip endpoint, it answeres then imediatly disconnects. Doing a monitor with Wireshark looks like it attempts to negotiate t38 but fails. Any idea why this fails?
    |160.260684000|         INVITE SDP (g711U)            |                   |SIP From:
    |         |(5060)   ------------------>  (5060)   |                   |
    |160.338806000|         INVITE SDP (t38)              |                   |SIP Request
    |         |(5060)   <------------------  (63435)  |                   |
    |160.339545000|         491 Request Pending           |                   |SIP Status
    |         |(5060)   ------------------>  (5060)   |                   |
    |160.547894000|         406 Not Acceptable            |                   |SIP Status
    |         |(5060)   <------------------  (63435)  |                   |

  • SSRS 2012 integrated with Sharepoint 2013, subscription and impersonation

    Hello,
    We are configuring SSRS 2012 integrated with Sharepoint 2013. The reports are connecting to SSAS cubes via shared Datasources. We have defined user based roles and security in the cubes and would like to pass the effective username to the cubes when they
    access data via reports.
    Also we need to create subscriptions on these reports to run on either daily/weekly or monthly schedule and send email to a list of users.
    How do we configure our Datasources on sharepoint so both could be acheived.
    Our Database and Sharepoint are on different servers.
    Thanks
    Deepak

    Hi Deepak
    For your first question:
    while configuring the datasource in SharePoint, check the option 'Set execution context to this account' in the settings. This will pass the effective user name to the cubes.
    Thanks
    Bala

  • CRM TPM - Integration with R/3, APO and BW  -Documentation

    Hi,
    We are beggining a TPM Project in CRM 4.0.
    Do you have any documentation how to integrate with:
      - R/3 Project System (WBS elements)?
      - APO ?
      - BW ?
    Thanks and Best Regards,
    SF

    E-mail: <removed by moderator>
    Thanks and best regards,
    Sara Figueiredo
    Anyone have any documentation how to integrate the campaigns with R/3 Project System in order to create WBS elements? Today we have in Controlling a solution with Controlling orders. Now we have to have WBS elements in R/3 that integrate with the CRM solution and R/3 Controlling orders.
    We also have to integrate with APO - demand Planning.
    Do you know any project in a consumer products industry with this solution?

  • GRC 10 PC Integration with AC

    Hello Experts,
    I have a following scenario where in i have to map Mitigation controls of AC to one of the controls/Control objective in Process controls. Is it possible to do this kind of integration in GRC 10? If yes, Is there any configurable settings which needs to be defined?
    Please let me know the available options to fix the issue.
    Regards,
    Su

    Hi Suma,
    To assign the Mitigation control to any of the controls in PC-
    -open the control through organization, which is assigned as 'Allow Local changes' as 'Yes'.
    -There you can give the Mitigating Control ID and save.
    Once saved, the Mitigation control ID cannot be changed.
    regards,
    Rajeshwari

  • Portal integration with OFA,OSA, Discoverer and Express

    Dear All,
    Is it possible to integrate OFA,OSA, Discoverer and Express into portlet or is there any other mechanism to fulfill those requirements?
    null

    David,
    All the tools you mention can be integrated into Oracle9iAS Portal as portlets usind the Portal Development Kit. Check out the Oracle Portal Development Kit (PDK) forum for more information on how to do this.
    The Discoverer team is working on some Discoverer portlets that should be available with Oracle9iAS Release 2 due later this year. I am not sure about OFA, OSA and Express.
    Rich

  • Org management (integration with SAP ECC 6) and shopping cart approval

    Background:
    We currently use EBP 3.0 - Classic Scenario.
    Our current Organisational plan was manually created in EBP, and is not the same as the HR hierarchy in SAP ECC 6
    Shopping cart approvals use the workflow WS10000276 u2013 Approval Single Level over Limit, which utilises the SLAPPROVER attribute. The user name assigned to the SLAPPROVER attribute does not have to be the manager of the user. To meet our Business requirements, a fairly flat structure was created at the time we implemented EBP 3.0. The approval level an approver is allowed to approve up to is controlled with the use of roles assigned to a user.  Each of the approval roles has an appropriate value set against the BBP_APPROVAL_LIMIT attribute under Personalisation.
    Moving onu2026
    We are just about to move from EBP 3.0 to SRM 7.0 u2013 Classic Scenario - by carrying out a new installation.
    Our Business requirement has changed, in that they want the approval of shopping carts to be carried out by the line manager, if that person can approve the value of the shopping cart. If not, for the approval to go up the HR hierarch until a manager with a suitable level of approval is found.
    I believe it is possible to create the Organisational structure in SRM from the HR hierarchy in SAP ECC 6. I have tried to do this in our play/test system using - Integration Business Partner-Organizational Management, without much success as yet!
    I have a few questions in this area:
    1.     Not all of the users in the SAP ECC 6 HR hierarchy will be SRM users. E.g. In the SAP
                 hierarchy there are 3 users u2013 User A, User B and User C. User B is the manager of User
                 A and User C is the manager of user B. In SRM only User A and User C are users. That
                 being the case, is it still possible to initially create the organisational in SRM from SAP ECC6?
    2.     If it is possible to create the organisational structure as described, then using Process
                 Controlled Workflow we could use the Shopping Cart BC Set One-step manager approval.
         If we did this, what would be the best way to incorporate the approval limit of a manager?
         Can this be simply achieved by setting the BBP_APPROVAL_LIMIT attribute in conjunction
                 with the One step manager approval?
         We want to avoid having to use the SLAPPROVER attribute due to the high level of
                 maintenance we currently experience.
    Thanks to anyone who can advise me.
    Claire

    Hello Clarie,
    this might help
    HR Data Synchronization (Org Unit, Position and Employee) to SRM
    Arshad

  • Workflow integration with Aperture or iPhoto, and storage/deletion questions.

    I have been using my iPad to download and view photos when I am travelling. I liked the fact that I could delete bad photos or do basic edits like crops and straightens in the "Photos" app and those edits would be saved when I transferred the photos to Aperture. And furthermore, the edits would be shown in Aperture as edits with the ability to revert back to the original or modify those edits later (for example if I wanted to change a crop or fine tune a straighten). This is an example of nearly perfect workflow integration, only problem is that the tools are pretty basic, for example the straighten tool requires an awkward gesture and has no control for fine tuning.
    Now when I bought iPhoto for iOS I figured it would be a more advanced version of that except with more complex editing abilities. However, when I make my edits in iPhoto for iOS, no matter how I import my photos onto my mac there seems to always be two different versions of each photo rather than having both the original and the edit combined like when I edit directly in the "Photos" app. And there's no way to fine tune the edits once imported into iPhoto or Aperture like there is when I edit the photos inside of the Photos app. Is this the correct behavior, and if so, is there anyway to make iPhoto for IOS behave more like the Photos app editing mode in terms of workflow integration.
    Also, I am unsure how the photos are stored in iPhoto for IOS. If I have a bunch of freshly imported photos in my "Photos" app's film roll, and then I edit them all in iPhoto for iOS, I now have two versions of each photo - one in iPhoto and one in the film roll. If I want to delete some photos to save space, can I delete all of the originals in the Film Roll and just keep the edits in iPhoto until I can sync with my Mac, or will that delete it in both places? Manually saving each edit as a new photo in the Film Roll and then deleting the original is tedious. Is the iPhoto app's library only storing the edited versions while the film roll is only storing the originals? Seems kind of like a weird way to handle things, and very unintuititive for those of us used to either iPhoto or the iOS film roll method of editing.
    I'm a fairly advanced user and all of this is pretty confusing to me. It seems like I might just have to ignore iPhoto for iOS and go back to my old method of editing in the Photos app for workflow integration purposes, but I wanted to check to see if I was missing something or doing something wrong first before giving up on iPhoto for iOS.

    Hello Robert. wow, dense prose...
    this wil be more transversal.. hope you'll forgive me.
    iPhoto has several shortcomings that other people might point out. I'll just mention a few.
    when you adjust the image, using the adjustement HUD that floats around just like the one in aperture, you're making destructive pixel changes. True, iP 6 has a way of keeping the original untouched, but the two images will live separate lives (in albums, etc). Furthermore: once you move to the next picture you want to enhance, all the adjustment HUD sliders return to zero. This means that you'll never be able to return to an image and visualize the changes you made to the picture looking at the sliders. You'll have to guess. and restart from scratch.
    About quality: the adjustement sliders in Aperture are waaay more subtle. iPhoto sliders impact the image in a very visible way.... as you "touch" will immprove, you might start to feel that adjusting with iPhoto is a bit gross.
    File renaming: personnal opinion: don't bother. set your camera to increase numbering always... and if possible choose a meaningful prefix (few cameras allow that, the Nikon D200 does). beyond that, I don't have time for this, and don't need it... keywording images is a much more effective way of making them easier to locate. my own view. others will disagree.
    duplicates: lots of people have identified this shortcoming in aperture. considering in version 1.5 they took the time to be able to identify referenced masters in a pretty comprehensive way (using a bunch of data like name+ date/time of capture to reconnect to a lost master), I'd be really surprised if the next major version doesn't fix that.
    Aperture accepts to import/reference your iPhoto folder but I don't think the former will see changes made in the latter..?
    just a few ideas.... HTH
    yours
    maxpol

  • Continues integration  with OS X Server and Xcode Bot

    I want to to do the continues integration using Xcode bots. I have installed OSX Mavericks and Server(version 3). Iam able to create bots using Xcode 5.0.1. While integrating it is successfully performing analysing testing but always the final integration result is failure.
    Integration failed. Unexpected internal server error. See the integration's logs for more details.
    I didnt understand anything from the server log. Can anyone help me?
    Here is the full Server Error Log
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSLogger.m:483 7e026310 +9ms] Logging to log file /Library/Server/Xcode/Data/BotRuns/BotRun-17675794-26ed-4a92-b196-40399c60f8d9. bundle/output/service-log-file-snippet.log
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSBuildBundle.m:247 7e026310 +0ms] Bot snapstot for bot run: {
                  containerGUID = "d365635a-4607-b2e8-2eca-9ce4821fed31";
                  createdByUserGUID = "732a32f3-8b83-4067-a09d-45076da78906";
                  extendedAttributes =     {
                      buildFromClean = 0;
                      buildOnTrigger = 0;
                      buildProjectPath = "iOS/SocialShare/SocialShareSample/SocialShareSample.xcodeproj";
                      buildSchemeName = SocialShareSample;
                      deviceSpecification = allDevices;
                      integratePerformsAnalyze = 1;
                      integratePerformsArchive = 0;
                      integratePerformsTest = 0;
                      pollForSCMChanges = 1;
                      scmInfo =         {
                          "/" =             {
                              botGroupGUID = "d365635a-4607-b2e8-2eca-9ce4821fed31";
                              credentialGUID = "fb7cf346-fe6e-4336-b893-8b9a06a550e0";
                              displayName = "https://harry-common.robosoft.co.in/Source";
                              isLocal = 0;
                              scmBranch = "";
                              scmCredentialType = password;
                              scmGUID = "80651525-4146-ab29-6f93-2cf11466ea32";
                              scmRepoPath = "https://harry-common.robosoft.co.in/Source";
                              scmRepoType = svn;
                              scmUsername = "anil.varghese";
                      scmInfoGUIDMap =         {
                          "/" = "80651525-4146-ab29-6f93-2cf11466ea32";
                  guid = "4e122aa2-56dd-4e3a-ad6e-25be1a65e657";
                  isBlogEnabled = 0;
                  isDeleted = 0;
                  isFavorite = 0;
                  isHidden = 0;
                  isMyPage = 1;
                  isPermanentlyDeleted = 0;
                  isWatched = 0;
                  lastActivityUserGUID = "742d3a53-c7b0-4911-9465-90a98fd3cf7c";
                  latestFailedBotRunGUID = "642d6a1b-0831-45b5-989e-65b319c3f084";
                  latestRunStatus = failed;
                  latestRunSubStatus = "internal-error";
                  longName = "Test Bot";
                  notifyCommitterOnFailure = 0;
                  notifyCommitterOnSuccess = 0;
                  ownerGUID = "d365635a-4607-b2e8-2eca-9ce4821fed31";
                  ownerType = "com.apple.entity.BotGroup";
                  parentGUIDs =     (
                      "70f4d626-c3cd-4678-8cb5-22648c1305b4",
                      "d365635a-4607-b2e8-2eca-9ce4821fed31",
                      "4e122aa2-56dd-4e3a-ad6e-25be1a65e657"
                  privateAttributes =     {
                  revision = 8;
                  shortName = testbot;
                  tags =     (
                  tinyID = testbot6;
                  type = "com.apple.entity.Bot";
                  updatedByUserGUID = "742d3a53-c7b0-4911-9465-90a98fd3cf7c";
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSBuildBundle.m:893 7e026310 +0ms] Updating bot and bot run status to running, substatus to
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 7e026310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 7e026310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 7e026310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:223 6e81000 +45ms] didReceiveResponse
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:225 6e81000 +0ms] response=<NSHTTPURLResponse: 0x7fd9b2530270> { URL: https://localhost:4443/svc } { status code: 200, headers {
                  "Accept-Ranges" = bytes;
                  "Content-Length" = 120;
                  "Content-Type" = "x-apple/msgpack";
                  Date = "Tue, 29 Oct 2013 03:45:41 GMT";
                  Status = 200;
                  "X-Apple-collabd" = yes;
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:233 6e81000 +0ms] didReceiveData
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:246 6e81000 +0ms] connectionDidFinishLoading
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:172 6e81000 +0ms] Out of runloop; request completed
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceProxy.m:79 6e81000 +0ms] Received successful response.
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 6e81000 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 6e81000 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSRemoteServiceClient.m:151 6e81000 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCWorkQueueService.waitForChangesToWorkQueue:forTimeInterval:sin ceDate:(control-17675794-26ed-4a92-b196-40399c60f8d9,30,<CSDateTime date=1970-01-01 00:00:00 +0000 epochValue=0 isoValue=1970-01-01T05:30:00.000+0530>)}
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:159 6e81000 +0ms] Secure, async request
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:169 6e81000 +0ms] Before runloop; request pending
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSRemoteServiceClient.m:151 7e026310 +2ms] Connecting to https://localhost:4443/svc to execute [https]Request{AuthService.enterMagicalAuthRealm()}
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:159 7e026310 +1ms] Secure, async request
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:169 7e026310 +0ms] Before runloop; request pending
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:260 7e026310 +8ms] canAuthenticateAgainstProtectionSpace
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:270 7e026310 +0ms] didReceiveAuthenticationChallenge
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:281 7e026310 +0ms] Server trust auth challenge. Host is localhost, sanityCheck 0, trust <SecTrust 0x7fd9b253da10 [0x7fff7d91aeb0]>
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:260 7e026310 +1ms] canAuthenticateAgainstProtectionSpace
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:270 7e026310 +0ms] didReceiveAuthenticationChallenge
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:293 7e026310 +0ms] Client cert auth challange.
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSSSLUtility.m:308 7e026310 +0ms] GetIdentityAndCertChainForName for com.apple.server.xcsbuildd
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSSSLUtility.m:353 7e026310 +2ms] Match found
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSSSLUtility.m:208 7e026310 +0ms] GetChainForCert common name: com.apple.server.xcsbuildd, summary: com.apple.server.xcsbuildd
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSSSLUtility.m:225 7e026310 +0ms] Chain for com.apple.server.xcsbuildd has 1 certs
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:300 7e026310 +0ms] didReceiveAuthenticationChallenge: GetIdentityAndCertChainForName returned identity and certs
    Oct 29 09:15:41 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:315 7e026310 +0ms] didReceiveAuthenticationChallenge using Cert: Identity Cert 1 - com.apple.server.xcsbuildd
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:223 7e026310 +402ms] didReceiveResponse
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:225 7e026310 +0ms] response=<NSHTTPURLResponse: 0x7fd9b2539cd0> { URL: https://localhost:4443/svc } { status code: 200, headers {
                  "Accept-Ranges" = bytes;
                  "Content-Length" = 1579;
                  "Content-Type" = "x-apple/msgpack";
                  Date = "Tue, 29 Oct 2013 03:45:42 GMT";
                  Status = 200;
                  "X-Apple-collabd" = yes;
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:233 7e026310 +0ms] didReceiveData
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:246 7e026310 +0ms] connectionDidFinishLoading
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:172 7e026310 +0ms] Out of runloop; request completed
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceProxy.m:79 7e026310 +0ms] Received successful response.
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 7e026310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSBuildHelper.m:97 7e026310 +0ms] Updating bot run with GUID 17675794-26ed-4a92-b196-40399c60f8d9
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSBuildHelper.m:102 7e026310 +0ms] Updating bot run (17675794-26ed-4a92-b196-40399c60f8d9): {
                  guid = "17675794-26ed-4a92-b196-40399c60f8d9";
                  status = running;
                  subStatus = "";
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 7e026310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 7e026310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSRemoteServiceClient.m:151 7e026310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCBotService.updateBotRun:({
                  guid = "17675794-26ed-4a92-b196-40399c60f8d9";
                  status = running;
                  subStatus = "";
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:159 7e026310 +0ms] Secure, async request
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:169 7e026310 +0ms] Before runloop; request pending
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:223 7e026310 +126ms] didReceiveResponse
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:225 7e026310 +0ms] response=<NSHTTPURLResponse: 0x7fd9b2540a60> { URL: https://localhost:4443/svc } { status code: 200, headers {
                  "Accept-Ranges" = bytes;
                  "Content-Length" = 3444;
                  "Content-Type" = "x-apple/msgpack";
                  Date = "Tue, 29 Oct 2013 03:45:42 GMT";
                  Status = 200;
                  "X-Apple-collabd" = yes;
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:233 7e026310 +0ms] didReceiveData
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:246 7e026310 +0ms] connectionDidFinishLoading
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:172 7e026310 +0ms] Out of runloop; request completed
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceProxy.m:79 7e026310 +0ms] Received successful response.
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSBuildHelper.m:108 7e026310 +0ms] Updating bot with GUID 4e122aa2-56dd-4e3a-ad6e-25be1a65e657
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSBuildHelper.m:117 7e026310 +0ms] Updating bot with latest bot run GUID key
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSBuildHelper.m:124 7e026310 +0ms] Updating bot (4e122aa2-56dd-4e3a-ad6e-25be1a65e657): {
                  guid = "4e122aa2-56dd-4e3a-ad6e-25be1a65e657";
                  latestRunStatus = running;
                  latestRunSubStatus = "";
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 7e026310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 7e026310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSRemoteServiceClient.m:151 7e026310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCBotService.updateBot:({
                  guid = "4e122aa2-56dd-4e3a-ad6e-25be1a65e657";
                  latestRunStatus = running;
                  latestRunSubStatus = "";
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:159 7e026310 +0ms] Secure, async request
    Oct 29 09:15:42 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:169 7e026310 +0ms] Before runloop; request pending
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:223 7e026310 +741ms] didReceiveResponse
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:225 7e026310 +0ms] response=<NSHTTPURLResponse: 0x7fd9b24735d0> { URL: https://localhost:4443/svc } { status code: 200, headers {
                  "Accept-Ranges" = bytes;
                  "Content-Length" = 1725;
                  "Content-Type" = "x-apple/msgpack";
                  Date = "Tue, 29 Oct 2013 03:45:43 GMT";
                  Status = 200;
                  "X-Apple-collabd" = yes;
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:233 7e026310 +0ms] didReceiveData
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:246 7e026310 +0ms] connectionDidFinishLoading
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:172 7e026310 +0ms] Out of runloop; request completed
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceProxy.m:79 7e026310 +0ms] Received successful response.
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSBuildBundle.m:837 7e026310 +0ms] Updating bot run with dictionary {
                  startTime = "<CSDateTime date=2013-10-29 03:45:43 +0000 epochValue=1383018343.023076 isoValue=2013-10-29T09:15:43.023+0530>";
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSBuildHelper.m:141 7e026310 +0ms] Updating bot run with GUID 17675794-26ed-4a92-b196-40399c60f8d9: {
                  startTime = "<CSDateTime date=2013-10-29 03:45:43 +0000 epochValue=1383018343.023076 isoValue=2013-10-29T09:15:43.023+0530>";
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 7e026310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 7e026310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 7e026310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSRemoteServiceClient.m:151 7e026310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{AuthService.enterMagicalAuthRealm()}
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:159 7e026310 +0ms] Secure, async request
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:169 7e026310 +0ms] Before runloop; request pending
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:223 7e026310 +150ms] didReceiveResponse
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:225 7e026310 +0ms] response=<NSHTTPURLResponse: 0x7fd9b2541da0> { URL: https://localhost:4443/svc } { status code: 200, headers {
                  "Accept-Ranges" = bytes;
                  "Content-Length" = 1579;
                  "Content-Type" = "x-apple/msgpack";
                  Date = "Tue, 29 Oct 2013 03:45:43 GMT";
                  Status = 200;
                  "X-Apple-collabd" = yes;
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:233 7e026310 +0ms] didReceiveData
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:246 7e026310 +0ms] connectionDidFinishLoading
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:172 7e026310 +0ms] Out of runloop; request completed
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceProxy.m:79 7e026310 +0ms] Received successful response.
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 7e026310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 7e026310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 7e026310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSRemoteServiceClient.m:151 7e026310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCBotService.updateBotRun:({
                  guid = "17675794-26ed-4a92-b196-40399c60f8d9";
                  startTime = "<CSDateTime date=2013-10-29 03:45:43 +0000 epochValue=1383018343.023076 isoValue=2013-10-29T09:15:43.023+0530>";
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:159 7e026310 +0ms] Secure, async request
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:169 7e026310 +0ms] Before runloop; request pending
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:223 7e026310 +682ms] didReceiveResponse
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:225 7e026310 +0ms] response=<NSHTTPURLResponse: 0x7fd9b25444f0> { URL: https://localhost:4443/svc } { status code: 200, headers {
                  "Accept-Ranges" = bytes;
                  "Content-Length" = 3526;
                  "Content-Type" = "x-apple/msgpack";
                  Date = "Tue, 29 Oct 2013 03:45:43 GMT";
                  Status = 200;
                  "X-Apple-collabd" = yes;
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:233 7e026310 +0ms] didReceiveData
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:246 7e026310 +0ms] connectionDidFinishLoading
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:172 7e026310 +0ms] Out of runloop; request completed
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceProxy.m:79 7e026310 +0ms] Received successful response.
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSBuildBundle.m:610 7e026310 +0ms] Starting credential download operation
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSBuildBundle.m:908 7e026310 +0ms] Updating bot run status to running, substatus to preparing
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 7e026310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 7e026310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 7e026310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSRemoteServiceClient.m:151 7e026310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{AuthService.enterMagicalAuthRealm()}
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:159 7e026310 +0ms] Secure, async request
    Oct 29 09:15:43 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:169 7e026310 +0ms] Before runloop; request pending
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:223 7e026310 +341ms] didReceiveResponse
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:225 7e026310 +1ms] response=<NSHTTPURLResponse: 0x7fd9b2542480> { URL: https://localhost:4443/svc } { status code: 200, headers {
                  "Accept-Ranges" = bytes;
                  "Content-Length" = 1579;
                  "Content-Type" = "x-apple/msgpack";
                  Date = "Tue, 29 Oct 2013 03:45:44 GMT";
                  Status = 200;
                  "X-Apple-collabd" = yes;
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:233 7e026310 +0ms] didReceiveData
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:246 7e026310 +0ms] connectionDidFinishLoading
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:172 7e026310 +0ms] Out of runloop; request completed
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceProxy.m:79 7e026310 +0ms] Received successful response.
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 7e026310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSBuildHelper.m:97 7e026310 +0ms] Updating bot run with GUID 17675794-26ed-4a92-b196-40399c60f8d9
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSBuildHelper.m:102 7e026310 +0ms] Updating bot run (17675794-26ed-4a92-b196-40399c60f8d9): {
                  guid = "17675794-26ed-4a92-b196-40399c60f8d9";
                  status = running;
                  subStatus = preparing;
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 7e026310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSConfig.m:55 7e026310 +0ms] Reading plist at /Library/Server/Wiki/Config/collabd.plist
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Info>: [CSRemoteServiceClient.m:151 7e026310 +0ms] Connecting to https://localhost:4443/svc to execute [https]Request{XCBotService.updateBotRun:({
                  guid = "17675794-26ed-4a92-b196-40399c60f8d9";
                  status = running;
                  subStatus = preparing;
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:159 7e026310 +0ms] Secure, async request
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:169 7e026310 +0ms] Before runloop; request pending
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:223 7e026310 +417ms] didReceiveResponse
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:225 7e026310 +0ms] response=<NSHTTPURLResponse: 0x7fd9b2540640> { URL: https://localhost:4443/svc } { status code: 200, headers {
                  "Accept-Ranges" = bytes;
                  "Content-Length" = 3535;
                  "Content-Type" = "x-apple/msgpack";
                  Date = "Tue, 29 Oct 2013 03:45:44 GMT";
                  Status = 200;
                  "X-Apple-collabd" = yes;
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:233 7e026310 +0ms] didReceiveData
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:246 7e026310 +0ms] connectionDidFinishLoading
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceClient.m:172 7e026310 +0ms] Out of runloop; request completed
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [CSRemoteServiceProxy.m:79 7e026310 +0ms] Received successful response.
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSCredentialOperation.m:34 7e026310 +0ms] Initialized a credential download operation for run GUID 17675794-26ed-4a92-b196-40399c60f8d9 scmInfo {
                  "/" =     {
                      botGroupGUID = "d365635a-4607-b2e8-2eca-9ce4821fed31";
                      credentialGUID = "fb7cf346-fe6e-4336-b893-8b9a06a550e0";
                      credentialToken = "O8}}H$q;-n;.}Lz-}Lq&~pSvmrT[$uOyFe^#~daG\\76[V~X#ghC{|T>2-HGnn<)_";
                      displayName = "https://harry-common.robosoft.co.in/Source";
                      isLocal = 0;
                      scmBranch = "";
                      scmCredentialType = password;
                      scmGUID = "80651525-4146-ab29-6f93-2cf11466ea32";
                      scmRepoPath = "https://harry-common.robosoft.co.in/Source";
                      scmRepoType = svn;
                      scmUsername = "anil.varghese";
              } downloadToken map {
                  "https://harry-common.robosoft.co.in/Source" = "O8}}H$q;-n;.}Lz-}Lq&~pSvmrT[$uOyFe^#~daG\\76[V~X#ghC{|T>2-HGnn<)_";
              } and credential path /Library/Server/Xcode/Data/BotRuns/BotRun-17675794-26ed-4a92-b196-40399c60f8d9. bundle/credentials
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSOperation.m:16 7e026310 +0ms] Executing operation: XCSCredentialOperation
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSCredentialOperation.m:68 7e026310 +0ms] Processing credentials for each scm URI in (
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSCredentialOperation.m:84 7e026310 +0ms] Processing scmItem / with credential download token O8}}H$q;-n;.}Lz-}Lq&~pSvmrT[$uOyFe^#~daG\76[V~X#ghC{|T>2-HGnn<)_
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSCredentialOperation.m:94 7e026310 +0ms] Creating credential path at /Library/Server/Xcode/Data/BotRuns/BotRun-17675794-26ed-4a92-b196-40399c60f8d9. bundle/credentials/fb7cf346-fe6e-4336-b893-8b9a06a550e0
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSCredentialOperation.m:104 7e026310 +0ms] Fetching credential with downloadToken O8}}H$q;-n;.}Lz-}Lq&~pSvmrT[$uOyFe^#~daG\76[V~X#ghC{|T>2-HGnn<)_
    Oct 29 09:15:44 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSCredentialServerHTTPClient.m:148 7e026310 +0ms] headerDict before request: {
                  "X-Apple-Credential-botRunGUID" = "17675794-26ed-4a92-b196-40399c60f8d9";
                  "X-Apple-Credential-command" = getCredential;
                  "X-Apple-Credential-downloadToken" = "O8}}H$q;-n;.}Lz-}Lq&~pSvmrT[$uOyFe^#~daG\\76[V~X#ghC{|T>2-HGnn<)_";
    Oct 29 09:15:45 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSCredentialServerHTTPClient.m:173 7e026310 +381ms] Got data in the download credential request <3c3f786d 6c207665 7273696f 6e3d2231 2e302220 656e636f 64696e67 3d225554 462d3822 3f3e0a3c 21444f43 54595045 20706c69 73742050 55424c49 4320222d 2f2f4170 706c652f 2f445444 20504c49 53542031 2e302f2f 454e2220 22687474 703a2f2f 7777772e 6170706c 652e636f 6d2f4454 44732f50 726f7065 7274794c 6973742d 312e302e 64746422 3e0a3c70 6c697374 20766572 73696f6e 3d22312e 30223e0a 3c646963 743e0a09 3c6b6579 3e706173 73776f72 643c2f6b 65793e0a 093c7374 72696e67 3e736861 646f772e 383c2f73 7472696e 673e0a09 3c6b6579 3e757365 726e616d 653c2f6b 65793e0a 093c7374 72696e67 3e616e69 6c2e7661 72676865 73653c2f 73747269 6e673e0a 3c2f6469 63743e0a 3c2f706c 6973743e 0a>
    Oct 29 09:15:45 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSCredentialServerHTTPClient.m:174 7e026310 +0ms] Got a response to a download credential request <NSHTTPURLResponse: 0x7fd9b2549980> { URL: https://127.0.0.1:2012/ } { status code: 200, headers {
                  "Accept-Ranges" = bytes;
                  "Content-Length" = 289;
                  Date = "Tue, 29 Oct 2013 03:45:45 GMT";
                  "X-Apple-Credential-credentialType" = password;
    Oct 29 09:15:45 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSCredentialServerHTTPClient.m:175 7e026310 +0ms] Got credential with type password
    Oct 29 09:15:45 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSCredentialServerHTTPClient.m:189 7e026310 +0ms] Mapping credential to an XCSCredential instance
    Oct 29 09:15:45 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSCredentialServerHTTPClient.m:192 7e026310 +0ms] Dealing with a password credential, attempting to initialize an XCSCredentialPassword
    Oct 29 09:15:45 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSCredentialServerHTTPClient.m:204 7e026310 +0ms] Got a credential object <XCSCredentialPassword: 0x7fd9b255e850> of type password
    Oct 29 09:15:45 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSCredentialOperation.m:109 7e026310 +0ms] Credential callback fired credential = <XCSCredentialPassword: 0x7fd9b255e850>, error = (null)
    Oct 29 09:15:45 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSCredentialOperation.m:117 7e026310 +0ms] Processing credential <XCSCredentialPassword: 0x7fd9b255e850> for downloadToken O8}}H$q;-n;.}Lz-}Lq&~pSvmrT[$uOyFe^#~daG\76[V~X#ghC{|T>2-HGnn<)_
    Oct 29 09:15:45 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSCredentialOperation.m:125 7e026310 +0ms] Updating operation result with credential
    Oct 29 09:15:45 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSCredentialOperation.m:130 7e026310 +0ms] Expecting 1 credentials, have 1 credentials already
    Oct 29 09:15:45 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSCredentialOperation.m:132 7e026310 +0ms] Done processing credentials
    Oct 29 09:15:45 AnilV-InetliMac.local xcsbuildd[3914] <Debug>: [XCSBuildBundle.m:637 7e026310 +0ms] Got credentials from credential operation: {
                  "fb7cf346-fe6e-4336-b893-8b9a06a550e0" = "<XCSCredentialPassword: 0x7fd9b255e850>";

    Hi Anil,
    Am curious to know if this problem has been solved. Have you tried with Xcode 5.1 ?
    Am trying to do this with Xcode 5.1, however am not able succeed the integration. However, am getting a little different error "NSLocalizedDescription=HTTP credential request failed, got HTTP status 400 with headers ".
    From your logs, I can see that you are able to successfully download th credentials, which is failing at my end. Hence it would be great if you let me know where have saved your credentials? Below is the error excerpt:
    Apr 15 13:04:52 estmacsvr01.local xcsbuildd[70827] <Debug>: [XCSCredentialOperation.m:104 7db26310 +0ms] Fetching credential with downloadToken JK~C]!>G!vzyVv)"e?C5j(TNAYYyI[-yV4)/ZAe|t]sfkK+f]u<\vbth^,u.0tVP Apr 15 13:04:52 estmacsvr01.local xcsbuildd[70827] <Debug>: [XCSCredentialServerHTTPClient.m:148 7db26310 +0ms] headerDict before request:
    "X-Apple-Credential-botRunGUID" = "afc45888-b5b4-4d0c-80a1-127ac3d3aa24";
    "X-Apple-Credential-command" = getCredential;
    "X-Apple-Credential-downloadToken" = "JK~C]!>G!vzyVv)\"e?C5j(TNAYYyI[-yV4)/ZAe|t]sfkK+f]u<\\vbth^,u.0tVP";
    Apr 15 13:04:52 estmacsvr01.local xcsbuildd[70827] <Error>: [XCSCredentialServerHTTPClient.m:155 7db26310 +139ms] Got a nil response to a download credential request
    "X-Apple-Credential-botRunGUID" = "afc45888-b5b4-4d0c-80a1-127ac3d3aa24";
    "X-Apple-Credential-command" = getCredential;
    "X-Apple-Credential-downloadToken" = "JK~C]!>G!vzyVv)\"e?C5j(TNAYYyI[-yV4)/ZAe|t]sfkK+f]u<\\vbth^,u.0tVP";
    Apr 15 13:04:52 estmacsvr01.local xcsbuildd[70827] <Debug>: [XCSCredentialOperation.m:109 7db26310 +0ms] Credential callback fired credential = (null), error = Error Domain=XCSCredentialErrorDomain Code=-1 "HTTP credential request failed, got HTTP status 400 with headers { "Accept-Ranges" = bytes; "Content-Length" = 0; Date = "Tue, 15 Apr 2014 07:34:52 GMT"; "X-Apple-Credential-error" = itemNotFound; }" UserInfo=0x7f91e4122ae0 {NSLocalizedDescription=HTTP credential request failed, got HTTP status 400 with headers { "Accept-Ranges" = bytes; "Content-Length" = 0; Date = "Tue, 15 Apr 2014 07:34:52 GMT"; "X-Apple-Credential-error" = itemNotFound; }}
    Your help is greatly appreciated!

  • Integration with muse created forms and business catalyst mailing lists

    I have just spent a long time on a chat session with support after spending most of a day trying to sort out how to have the people who fill in our contact us page to be automatically added to a mailing list to keep in contact with them, but it seems there isnt a strong link with muse to do this easily.
    When you create a form in muse, it has an option to send the completed forms to a selected email adress. It would be great if you there was also an option to add that contact to a selected mailing list group already created in Business Catalys
    I would have also like the full integration of form central to be inside muse with all its functions. So I could create gift voucher orders forms  and receive payments by paypal or other options.
    It has been a frustrating day trying to figure it out as the forums didnt seem to help with the info i needed.
    It seems to use Business Catalyst webforms requires html coding knowledge which I dont have. you can created a basic form in there easily, but if you want to make it two collumns wide or other changes, it is very difficult to use with coding
    A decent wysiwig editor in Business Catalyst would be great
    thanks for listening.
    Overall I think Muse is excellent so I am surprised, this part of the software doesnt work as I expected.
    Brian

    Hi
    This was the full video I did
    Integrate Leadpages with Adobe Business Catalyst on Vimeo
    Pretty sure it works
    Here's the code I used so you can compare and contrast
    <form name="catemaillistform52797" onsubmit="return checkWholeForm52797(this)" method="post" action="http://www.platonik.co.uk/CampaignProcess.aspx?ListID=47104">
        <div class="form">
          <div class="item">
            <label for="CLFullName">Full Name</label>
            <input class="cat_textbox_small" type="text" name="FullName" id="CLFullName" maxlength="255" />
          </div>
          <div class="item">
            <label for="CLEmailAddress">Email Address</label>
            <input class="cat_textbox_small" type="text" name="EmailAddress" id="CLEmailAddress" maxlength="255" />
          </div>
          <div class="item">
            <input class="cat_button" type="submit" value="Subscribe" id="catlistbutton" />
          </div>
        </div>
        <script type="text/javascript" src="http://www.platonik.co.uk/CatalystScripts/ValidationFunctions.js"></script>
        <script type="text/javascript">
          //<![CDATA[
          function checkWholeForm52797(theForm){
            var why = "";
            if (theForm.EmailAddress) why += checkEmail(theForm.EmailAddress.value);
            if (why != ""){
              alert(why);
              return false;
            theForm.submit();
            return false;
          //]]>
        </script>
      </form>

  • Reader X plugin integration with Windows Explorer 8 and Protected Mode

    Hello
    I am viewing pdfs with Reader 10.1.3 within ie8 on XP
    I have a Reader plug-in (WordFinder.api) that works ok with Protected Mode disabled.
    Unfortunately I have customers that require Protected Mode enabled and this stops the plugin working.
    Within my code, calling DdeConnect returns 0 (fail)
    I have populated and enabled the ProtectedModeWhitelistConfig.txt but cannot account for the final access error for DINPUTWINMM
    Here is the log...
    [10:19/13:34:19] Adobe Reader Protected Mode Logging Initiated
    [10:19/13:34:19] Found custom policy file: C:\Program Files\Adobe\Reader 10.0\Reader\ProtectedModeWhitelistConfig.txt
    [10:19/13:34:19] Adding custom policy: PROCESS_ALL_EXEC = C:\Program Files\Adobe\Reader 10.0\Reader\plug_ins\WordFinder.api
    [10:19/13:34:19] Adding custom policy: REG_ALLOW_ANY = HKEY_LOCAL_MACHINE\SOFTWARE\Adobe*
    [10:19/13:34:19] Adding custom policy: REG_ALLOW_ANY = HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joy stick\Winmm*
    [10:19/13:34:19] Adding custom policy: REG_ALLOW_ANY = HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\MediaProperties\PrivateProperties\Joystic k\Winmm*
    [10:19/13:34:19] Adding custom policy: REG_ALLOW_ANY = HKEY_LOCAL_MACHINE\Software\Microsoft\Tracing
    [10:19/13:34:19] Adding custom policy: REG_ALLOW_ANY = HKEY_CURRENT_USER\SOFTWARE\Adobe*
    [10:19/13:34:19] Adding custom policy: REG_ALLOW_ANY = HKEY_CURRENT_USER\Software\Microsoft\Direct3D\MostRecentApplication*
    [10:19/13:34:19] Adding custom policy: REG_ALLOW_ANY = HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings*
    [10:19/13:34:19] Adding custom policy: EVENTS_ALLOW_ANY = MSFT.VSA*
    [10:19/13:34:19] Adding custom policy: EVENTS_ALLOW_ANY = _fCanRegisterWithShellService
    [10:19/13:34:19] Adding custom policy: EVENTS_ALLOW_ANY = DINPUTWINMM
    [10:19/13:34:19] Adding custom policy: MUTANT_ALLOW_ANY = \BaseNamedObjects\*RasPBFile*
    [10:19/13:34:23] CreateEvent: STATUS_ACCESS_DENIED
    [10:19/13:34:23] name: DINPUTWINMM
    Can I add DINPUTWINMM? and if so what is the syntax.
    Thankyou
    Nick

    Hi Fernando,
    Here's a statement that hopefully helps or at least solves your mystery:
    While Protected Mode can be disabled for PDFs viewed with the product, Adobe continues to protect you when 3rd party software invokes a Reader process; that is, Protected Mode sandboxing cannot be disabled for shell extensions. For example, when you use Windows Explorer to preview a PDF in the Preview Pane, it starts a Reader process to display the preview. In such cases, Task Manager shows that two AcroRd32.exe processes spawn and that the operation is occurring with Protected Mode enabled.
    Ben

  • IOS 6 facebook integration with multiple list selection and exception list selection?

    hey guys,
    does anyone know if there is in the iOS 6 facebook integration an option choosing multiple friendlists for posts or even the option to reject friendslists from reading particular posts?
    this is what i miss in the facebook app and why the google plus app is better than the fb app.
    maybe apple is going to introduce this facebook desktop posting feature into ios 6
    greetz

    semir.at wrote:
    thank you meg, i thought because of the hundreds of ios 6 youtube videos anyone can comment this.
    There is no way anyone here can comment on the veracity of those hundreds of videos. Sorry.

  • Integration with ECC 6.0 and SRM 5.0

    Dear Experts,
    We have ECC 6.0 implemented.
    We want to implement SAP SRM 5.0.
    Kindly anybody can guide us to know the Customisation/ configuration of both the systems.
    For extended classic senario what setting to be done..
    For other scenario what settings to be done....
    regards
    D Ganesh

    Hi shyamasundar,
    Download Guide for Automated Configuration: SAP Supplier Relationship Management (SAP SRM) Portal on the SAP Service Marketplace at http://service.sap.com/instguides
    These will help you.
    http://wiki.sdn.sap.com/wiki/display/SRM/EnterprisePortaland+SRM
    http://help.sap.com/saphelp_NW70EHP1core/helpdata/en/73/c4f67345c045008d06284a7c895b2e/content.htm
    Rgs,
    Pedro Marques

  • CRM IC email integration with Google

    Dear all,
    We have a CRM IC („OnPrem“) prospect. The customer's corporate email system is based on Google.
    Would anybody be able to share some information regarding the feasibility of CRM IC ERMS integration
    with Google for in and outbound email communication (SCOT interface).
    Your input is very much appreciated.
    Best regards,
    Henrik
    Mit freundlichen Grüßen / Best
    Regards,
    Henrik Vogt
    Senior Consultant
    SAP Deutschland SE & Co. KG I
    Rosenthaler Str. 30 I 10178 Berlin I Germany
    M   +49 160 90819696 I mailto:[email protected] I http://www.sap.de

    Hello,
    I think you're missing one setup step in the client-side groupware integration: the customizing.
    In SPRO>CRM>CRM Middleware and related comp-->Settings for client-based synchronization.
    The reason why your reply button is inactive is probably due to the missing custo setting. In the custo activity mentioned above you must specify which transaction types you'll use for incoming and outgoing e-mails. If eg the outgoing email transaction type is disabled, the buttons on the screen to send an outgoing e-mail (reply) will also be disabled.
    P.S. The setup of client-based groupware integration is also described in building block C31 Activity Management (chapter 3.6) of the SAP best practices on help.sap.com. An installation guide is also available on service.sap.com.
    Hope this helps,
    Kind regards,
    Joost

Maybe you are looking for