GRC 10: Initial password for multiple users creation in a ARQ request???

Hi All,
I was trying to create a request in ARQ for multiple users. I noticed that, I could add all the necessary required information for multiple users using the template. I added the roles as well. However, I could not set the initial password for multiple users as the tab "User System Details" (where the initial password is provided for a single user) is disabled!!!
The users were successfully created in the R/3 system. However, due to non-availability of initial password, these users could not log into the R/3 system.
May I know how to set the initial password for multiple users?
Regards,
faisal

Vit,
I was trying to test this multiple user creation scenario. But I am surprise to get a template where in I have only below mentioned fields:
1. User Name
2. User Id
3. Email
I filled these details and uploaded. Then filled the "User Access" details. While submitting the request, I got the error:
"Last name is not mentioned for user id XXX"
But there is not such column in provided template by GRC!
I added 2 columns: First Name and Last Name and saved it and uploaded again. These details are not picked up!
Following are the only columns shown:
1. User Name
2. User Id
3. Email
4. Manager
Out of above, only "Manager" field is editable and others are disabled.
Last time I remember, I has got complete template with all the columns. Unfortunately, I have deleted it and not available with me now.
Any idea you have why am I getting such incomplete template?
Regards,
faisal

Similar Messages

Rest of Passwords for multiple users in 11i

Hi Hussein,
I need to reset the password for 10 Application Users in 11.5.10.2. Please let me know what is the best way. Is it possible to reset the user password from the frontend as well.
Thanks
-Samar-

For 10 users, it would be simpler/easier to do it from the front-end forms manually - should take no more than 5 minutes. If you want to script this process, you can use the FNDCPASS command line utility. Pl see these MOS Docs
437260.1 - How to Change Applications R12 Passwords using Applications Schema Password Change Utility (FNDCPASS)?
159244.1 - How To Use FNDCPASS to Change The Oracle Users, APPS, APPLSYS and Application Module Passwords (INV, AR, AP, etc.) For Applications 11.5 in Unix
HTH
Srini

How to programmatically set initial password when a user is created in OID

We are using the odihragent synchronization process to automatically create users in OID when an employee record is created. We would like to set the initial password for the newly created user to their last name + the last 4 digits of their SSN.
The odihragent process is successfully creating the user in OID and populates the last name and the last 4 digits of the SSN in OID. According to an open SR I have with Oracle, we cannot use the odihragent process to set the initial password because any time the employee record is updated, the synchronization process will reset the password to last name + SSN. They have recommended that we use a pl/sql plug-in to set the password using the WHEN_ADD plug-in procedure.
I am new to using OID and plug-ins and the examples provided in the Developer's Guide are limited.
I would like to know if anyone else is using plug-ins or another process to set initial passwords when a user is created? If you are using plug-ins would you be willing to share a code sample?

I am surprised that I have not received any responses... Surely there are others who are experienced with programmatically setting passwords when new users are programmatically created. Does anyone have any pointers on how to best accomplish this?

Initial password when LDAP user created i SAP?

Hi,
I'm about to configure LDAP integration with SAP, where users that exist only on the LDAP server are created in SAP.
Are any initial passwords automatically set for these users in SAP, or will an administrator have to go in and set an initial password for all created users?
Thanks, Oscar

Hi,
I assume you will use the LDAP synchronization in an ABAP system. Here you have to maintain the fields to be synchronized. The password field is typically not synchronized but you can fill in the logondata hashvalue. I never tried to get the hashvalue out of LDAP because LDAP and SAP may use different hash algorithms. The better way is to set a fixed value in the mapping. You can use SAP functions to maintain the hashvalue.
Transaction for maintaining the mapping: LDAPMAP.
Regards
Rainer

CUA environment - changing the initial password of a user.

Hi Gurus,
I've encounter a perculiar issue when I assign an initial password to a user.
My system setup is based on CUA where my Central admin is client 100, with child client 200.
- I create an ID in client 100, set it to system 200, set initial password as "passW0rd". Save
- The ID was created in 200
- Logged in Client 100 using ID and "passW0rd", prompted for new password (i canceled the login)
- When back to client 100 CUA, in SU01 I select ID and click "EDIT", under the logon data I retype the initial password to "P4ssword"
- checked SCUL, it's green and user change
- Logged in Client 100 using ID and "P4ssword", error in password
- tried the old "passW0rd", prompted for new password.
I puzzled why the CUA did not redistribute the changed initial password to client 200, another can any ideas?
I also tried SU01 and click "reset password" button instead of "edit", the changed password was able to distributed to client 200.
By password change is ok this way or not ok if change within edit mode?
Thanks,
Jansen

Hi Sergo,
Yes I realise the "change password" works but for my case I cannot use that function. Any other suggestions. Cos by right even if I were to change in the logon data it should work right?
Hi Juan,
Yes I've checked, the IDOCs are in and successful.

Best way to set up a Mac laptop for multiple users with AD logins

I am setting up a MacBook Pro running 10.4.11 that will be used as a "loaner" notebook for meetings, etc. The computer will be used internally at our company, so users will be logged into our network. Active Directory is set up on this computer to allow all domain users to log in using their own user name and password; this approach helps meet our company's security standards (we want to avoid using one common login or account for all users).
While this approach seems to fit our needs, it causes problems when it comes to running applications. For instance, each new user is prompted to enter first-time usage information when launching an application (forcing them to contemplate registration information, various settings, etc.). I've given "everyone" read-write privileges to the HD > Library and the Applications folder, but this does not solve anything and may not be a good approach anyway.
I would welcome any advice on the best way to set up this computer for multiple users logging in via Active Directory. Thanks!

Where are you installing the third party applications? It sounds like they are being installed in the 'User 1' account, rather than the /Applications folder (admin or not, one user normally can not see into another user's folders). Repairing permissions only works for applications that have a file in /Library/Receipts, not on folders in general, so you would need to check the permissions for the folders in question.

Adobe Reader Pro 9 requires password for every user after seciurity updates?

Everytime I installe any Adobe Reader Pro seciurity updates like 9.4.3 and 9.4.4 on our Macs 10.6.6 and 10.6.7,
I had to input admin password for every user as reader is stoppng on install updates screen,
We have some hotmacs that are shared so it's a bit of a pain. Users don't have admin acess
to be able to install software on them.
How do I resolve this?
Here's what I tried. None of these things resolved the problem for me.
Repair disk permissions.
Restart the Mac.
Repair Adobe installation

Hi Sorry, the product in qusitons is Adobe Acrobat Pro 9.4.4 and 9.3.4 updates.
If you launch Acrobat Pro as the admin user, then authorise when requested, does that fix the problem for all users?
Or does this happen every time, for each user?
It does prompt for password for every user, thefore my flustration we have multiple editors using a Hotmac.
And we have to enter the password at least one time for every user after stupid seciurity update.
Presumably, Acrobat is trying to write to a location that Standard users don't have permission for.
Standard users don't have admin access to Mac but still I find adobe behevior very annoying.
I think this is normal enterpirse practise.
What happens if you allow write access to the Acrobat application folder and subcontents? Make sure you know what you're doing and how to restore it.
Would try this but still I would expect adobe to fix it updates.
Thanks,

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

Can we creat an Apple ID for multiple users?

I work for a company where we are rolling out iPads in big amounts. The problem is that they all need an Apple ID in the training they get about the iPad they receive because they have to install MobiControl on it.
It's no problem to let them create an Apple ID at home, but they have to fill in credit card numbers once they connect at work when they try to install apps. That's the problem... Not everyone want's or has credit cards...
Maybe it's possible to create an Apple ID for multiple users???
Thanks!

iPad in Business and Education
You may find a better answer in this part of the forum, since it's meant for situations like you're in.
http://www.apple.com/support/appleid/
is also info about apple ID's.
You can make apple ID's without a credit card, you just have to jump through a couple of hoops to do it since the default is that people will always give a credit card. The key to making an ID without a credit card is that you try to download a free app first, then follow the 'make an ID' prompt. That will get you the 'none' option for payment.

Initial password for SAP* in SAP NetWeaver 2004s ABAP Edition

Hello,
I have just installed the SAP NetWeaver 2004s ABAP Edition on my PC and I want to setup some new clients to simulate an ALE model.
Does anyone know the initial password for SAP* ?
I have already tried PASS and pass because I know it is case -sensitive now but it did not work.
Thanks a lot.
Wim Van den Wyngaert

Hi,
initial SAP* password is 06071992
DDIC is 19920706

Can I use one itunes account for multiple users and multiple devices

Can I use one itunes account for multiple users and multiple devices?

The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....

For multiple users on a computer, will Firefox Sync synchronize all the users on a computer or only the one logged on?

For multiple users on a computer, will Firefox Sync synchronize all the users on a computer or only the one logged on? For instance my spouse and I will share a laptop and I want to sync my Firefox when I log on there also but do not want to sync her data.

Curt
how do you know if your using the
Central cache all distributed cache ?
and are they both stored in the same place ?

Can i install itunes multiple times on one computer for multiple users?

Can i install itunes multiple times on one computer for multiple users?

Like most applications you only need to install it once for it to be available to all users. (That said it is possible to install an application and only make it available to the current user, but that's rarely needed.)
tt2

How to make Adobe acrobat feature to convert SAP Pages to PDF available for multiple users connected to the same Citrix server

Hi,
In my previous endeavours to solve this business requirement where multiple users will be able to use the Adobe acrobat feature to convert SAP pages inside SAP to PDF, I was told that it is not possible to do this for multiple users at the same time. However I have found an article according to which it says it is possible. Could you check it once and let me know if this article can be used for implementing the requirement stated above as this link clearly indicates that Adobe Acrobat is supported on Citrix.
Please find the link below where it states it is adobe acrobat is supported in Citrix for multiple users.
http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/citrix.html.

1. What is the Acrobat feature that you mean? There's nothing specific to SAP included with Acrobat.
2. Yes, some Terminal Server configurations appear supported (check carefully). All users of the terminal server will need a license, so far as I know - total licenses = total individual people using.

Triggering a sub work flow for multiple users at same time.

I have a scenario in which I have created sub workflow as an activity for approval process. This sub work flow should be triggered for multiple users at the same time and their decison is independent of each other.
This is like creating multipe instance of the same sub work flow and then the sub work flow runs indepedently as a new work flow for each of the approver and the process is completeded for approver independently.
How can this be achieved?

Tyr to do like this,
1. First include the subworkflow in the main workflow template.
2. Now include standard Block Step in the main workflow template.
3. In the block select the block type as ParForEach.
4. Before doing the 3rd point make sure that all the agents for whom you want whom you want to initiate the workflow, populate them in a Multiline conatiner element.
5. Once completing 3rd and 4th points open the block step under the tab ParallelProcessing assign the multiline container element name in the for e;g if the multi line container element name is COSTCENTER then do the binding like below. the conatiner element COSTCENTERLINE is created by default once you include the multi line conatiner element under parller processing tab.
&COSTCENTER[&_WF_PARFOREACH_INDEX&]& --------> &_COSTCENTER_LINE&
Now assign the agent of the subworkflow as COSTCENTERLINE , imean if suppose you have 3 entries in the internal table then three separate and for three different agents the workflow is instantiated.

GRC 10: Initial password for multiple users creation in a ARQ request???

Similar Messages

Maybe you are looking for