GRC 10 Not able to search roles in Access Request Creation

Hello Experts,
I am unable to search for roles while creating access request by giving system name.
I am able to search with any other search criteria except system.
When I look for valid entries for System I get the following connector group values:
ECC - (Custom Connector Group)
SAP_BAS_LG
SAP_ECC_LG
SAP_HR_LG
SAP_R3_LG
All the above connector groups are pointing to the same system XXXCLNT100. I want to get only ECC as the result when I search for the system (Probably then it might work right).
Others that start with SAP are linked to the XXXCLNT100 for generating rules after activating BC Sets.
Any ideas how to get this work !!
Thanks and Regards,
Ajesh Raju.

Found Note:
Note 1654033 - Role search by System is giving same result
Regards,
Ajesh.

Similar Messages

Not able to search for FF IDs on clicking Super user access tab in request

Hi experts
in GRC AC 5.3 CUP , Im trying to create new request with Superuser Access request type . On selecting the request type , I get the superuser access tab enabled in the request , Now when I click on that , I am not able to search any Firefighter Ids which are present in the backend SAP system .
However when I try the same in anohter CUP box in the landscape , it worked .I could see all the FF Ids in that system
What configuration do I miss in the first box which is not allowing me to view the Ids on search .
Thanks

Yes , I had chosen a wrong connector . you are right .
if the connector is working fine , all the Firefighter Ids are fetched properly.
Thanks

GRC 10.0: Access Request Creation - LDAP user advanced search not working

Dear Experts,
We are implementing SAP GRC Access Control and we have an issue in Access Request Creation. If we put the user name in “User” field and press intro, the user details are updated, but if we want to make an "Advanced search" the user is not found and the application give us the following message: “No records found for the search criteria entered.”
Scenario 1: If we put the user name in “User” field and press intro, the user details are updated:
Scenario 2: If we want to make an "Advanced search" the user is not found and the application give us the following message: “No records found for the search criteria entered.”
We are using the Active Directory as Data Source.
Thanks and Regards.

Hi Jose,
Try maintaning the parameter 2050 as YES and check once.
Kindly, also make refer to the below list of SAP notes:
1757906 - GRC 10.0 - LDAP user search does not work in NWBC
1745370 - LDAP search in GRC does not work anonymously
1718242- UAM: User search not working in Access Request.
Regards,
Neeraj Agarwal

Not able to search Product Id replicated from R/3

Hi All,
Issue Description: Not able to search the Product Id (Material) replicated from R/3 backend system in SRM Shopping Cart Wizard.
The same Product Id(Material) is seen in the transaction "COMMPR01" in SRM.
I checked in the tables COMM_PRODUCT and found the entry with this material.
In R/3 backend system, Basic Unit of Measure is maintained in Purchasing data of the Material. But Order Unit is not maintained.
What surprises me is that if i maintain manually the Order Unit in Purchasing Tab for this material in SRM, then i am able to search this Product Id in the SRM Shopping Cart Wizard screen.
Also, I have performed the replication of DNL_CUST_BASIS3 before replicating the material object.
We are on SRM 4.00,SAPKIBKS13.
Your inputs will definitely help us in resolving this issue.
Thanks & Regards
K Gp

Hi,
To correct this, the OSS notes 1072160,1102001,1112879,1115992 & 1156748 needs to be applied in SRM EBP system.
After applying the OSS notes, the order unit field will have the same value as that of base unit of measure provided order unit is not maintained for the material in R/3 Backend system.
Also include the authorization object "COM_ASET" in the role that has been created for the RFC user in SRM EBP system.
Kindly let me know if this doesn't works.
Regards
K Gp

My apple tv is not able to search youtube

Why is my apple tv not able to search youtube and how can I fif this problem?

Restart your router and unplug the AppleTV and restart it.

Access request creation - select roles screen - field boxes were not aligned

I'm not sure if this is really the screen of SAP GRC 10.1 access request creation. The field boxes were not aligned. Is there a note to fix this issue? Thank you.
Regards,
Jenilyn

Hi Mohamed,
Even I used Google Chrome, it's the same. Still facing the same issue. Is there any other way to solve this issue?
Thank you.
Regards,
Jenilyn

HT1414 I have an Iphone 3GS 16gb which was working on ios 4.1.1 The phone isn't factory unlocked. I upgraded it to IOS 6.0.1 and after that i am not able to search for networks. it shows no services.

I have an Iphone 3GS 16gb which was working on ios 4.1.1
The phone isn't factory unlocked. I upgraded it to IOS 6.0.1 and after that i am not able
to search for networks. it shows no services.

Ok thank you so much! Although I ended up taking the sim card out of my new Iphone and reinserting it into my old one it finally let me restore it! So thanks once again this really helped!

Bluetooth not working on my iphone 4 .using iOS 5..not able to search devices in range

Bluetooth not working on my iphone 4 .using iOS 5..not able to search devices in range.Need help on this.Any suggestion guys that would be very handy...

To what device are you trying to pair your phone? The iPhone doesn't pair with other phones or computers.

HT1631 I am not able to recover my keychain access. I followed the directions to "Reset My Default Keychain" and then entered a new password. It will not accept a new password. How do I Reset or recover the KeyChain Access Password?

I am not able to recover my keychain access. I followed the directions to "Reset My Default Keychain" and then entered a new password. It will not accept a new password. How do I Reset or recover the KeyChain Access Password?

This is what you tried?
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544
Keychain Access asks for keychain "login" after changing login password...
http://support.apple.com/kb/HT1631

GRC 10.0 Access Request Creation- Data Source of User Details

Hi Experts,
I was doing GRC 10.0 Configuration and found a query which I am not able to resolve.
While creation of any kind of Access Request in GRC through NWBC> Acces Management Tab>Access Request>Access Request Creation.
In the user details section, I can see the HR records( like Pernr, position, manager) have been visible to some extent.
My question is where from these details came in GRC. What configuration we should maintain to achieve these HR records?
Hope to get a quick response as this is one of the requirement of the implementation which I am doing with my customer.
Thanks,
Atanu

Alessandro,
Thanks for your response. It helped me to know certain things.
But when I am navigating to SPRO > GRC > Access Control > Maintain Data Sources Configuration > [User Detail Data Source], it is configured with a ECC system in target connector and User data type is maintained as "SU01".
Now my question is where from in my case the GRC is pulling the HR records (PA20) like PERNR, POSITION,PERSONEL AREA etc? SU01 does not provide these information. My ECC box is integrated with HR module, so is it taking the data from HR directly?
Thanks in advance!
Atanu

No Roles In Access Request - GRC 10 SP06

Hello Experts ,
With GRC 10 SP 06 ,I am facing strange issue .In Access request when I search for roles to be assigned I am not getting any result .
I have performed all post installation system and same working with SP 05 in other landscape .
Important steps like running back ground jobs for user.role.profile synch role import all is done .
Thanks & Regards
Ashish

Hi,
You have hit a similar problem I faced after moving to SP06.
What is the value assigned to the "Role Status"? If it is not "Production/PRD", then Access request doesn't allow it to be displayed as a selectable option for assignment. Prior to SP06, this was not checked, but SP06 got updated to ensure roles that are not in Productive use status can not be assigned for usage.
Once you change this status over in the roles you wish to make available for assignment via Access Request, you should be able to search and select them.
Hope that helps.

BI Publisher - SuperUser not able to acces Roles and Permission Page

I have set up the BI Publisher as said in http://gerardnico.com/wiki/dat/bip/configuration_bip.
But
1. SuperUser is not able to access Roles and Permission.
2. I'm not able to access the BI Answers Catalog.
I also have a doubt about the BI Server Admin. Is it the RPD Admin?
Kindly Help

I have set up the BI Publisher as said in http://gerardnico.com/wiki/dat/bip/configuration_bip.
But
1. SuperUser is not able to access Roles and Permission.
2. I'm not able to access the BI Answers Catalog.
I also have a doubt about the BI Server Admin. Is it the RPD Admin?
Kindly Help

SQL Authenticator Issue not able to see roles /groups in BPM Worklist

Hi ,
I had configured the SQL Authenticator in Web logic using the SQL Authenticator default scripts and i have inserted few users.
I am able to login to the Workspace using the users available in DB but i am not to able to see his group / role to which he belongs.
Even the user who belongs to Administrator group not able to see Administrator tab in BPM Workspace.
I have already added dbprovider.jar and i have configured jps-config.xml accordingly such that it point to custom SQL Authenticator.
Even set the Control flags to "SUFFICIENT".
Please some one help me on this.
Its a high priority task.
Regards,
Santosh H

As u are talking about the IR ID components, u may have a look here
For IR components
The specified item was not found.
For ID components
Security: Access Control via Assigned Users
Regards,
Prateek

Not able to comapre roles in DEV and QAS using SUIM?

Hi,
I am trying to compare role in both DEV and QAS, DEV and PRD using SUIM t-code.
While comapring its showing that roles are in different systems, not able to comapre.
Actually role exisitng in both QAS and PRD.
Individually I can login to QAS, PRD can see the role.

For role comparision both the roles must be in the same system, in same client
Transaction code SUIM -> Comparision-> Roles
If the roles are in different system, then tranport the role into one of the system and do comparision. If no transport connection defined then, you can use the upload and download option in the PFCG
comparing
Run the t-code SUIM
Go To Comparison and select the option of roles
Click on Across systems option it will give option to select the sys name under Remote Comparison there enter the SYS ID between which system you want to do comparison and put the role name in compare role section then execute it will give you the result.
If there is any difference b/wn the t-codes it will b in red colour otherwisein yellow.

IPhone 3G upgraded to IOS 4.1, not able to search any WiFi routers

My iPhone 3G upgraded to IOS 4.1 and no longer able to search or connect to any WiFi access points, tried both reset Network settings and All settings but no help, any brothers encounter the same issues?
Just got some idea about what may happen to me.
Reports: iOS 4 upgrade kills old iPhones’ Wi-Fi (Yahoo News)
http://news.yahoo.com/s/ytechwguy/20100712/tc_ytech_wguy/ytech_wguytc3098

Same phone same os same problems. Over the past week my iPhone has been having trouble connecting to wifi. Have to join my home wi fi manually, everytime I want to go on Internet. Then it works for maybe a minute or two, then stops. Happening on other known networks too. Help

GRC 10 Not able to search roles in Access Request Creation

Similar Messages

Maybe you are looking for