GRC 5.3 | ERM | Disabled Role Comparison Field

When executing a role comparison in ERM, the only way to select the role is to use the magnifier next to the field, search and select the role. As we have thousands of roles, this is not userfriendly.
Is is possible to enable the field for role name in the role comparison "section" so that can be searched on roles using wildcards.
Thx.

Hello Kraell
Considering that this feature is not available as of now but if you still have dire need for the same, you may contact SAP if they can treat this as an enhancement request (for which you might be charged a bit) and deliver this feature to you.
Regards,
Hersh.
http://www.linkedin.com/in/hersh13

Similar Messages

Role Comparison Cross System - alternatives to RSUSR050

Hello Experts,
Would there be an alternative for Cross system role comparison outside of using RSUSR050 ?
We have a variety of landscapes and are on different basis levels...SAP notes have corrected all but one
which is older release level- business not ready to upgrade this one
I have dabbled with SCMP tcode but results are not clear or complete. I was using table AGR_1250 and 1251
Any thoughts appreciated ..
Dan.

Thanks Bernhard,
i guess i need a little instruction on how to use this tcode (if that's the best method). When i compare 2 roles that are different
SCMP notes they are the same ? but i notice there is a field that selects Role id - only allows one numeric input. Can't seem to
get an entire display of the auth objects. I did this by entering our RFC dest and table name AGR_1251.
Any other alternatives. The SUIM (RSUSR050) works fine functionally and we have RFC dest but because of the differing Basis levels on this particular destination server- the results are erroneous and incomplete. Thanks !

Business Partner Role Specific Field View in WebClient

Hello to everyone,
I have a question that really needs a answer. We are upgrading from SAP CRM v4 to SAP CRM v7.0 and as such we have a number of custom Business Partner Roles within the Person BP Type. Against these custom roles we have developed custom field and tabs in order to separate the content within the BP Role further.
After rolling off an implementation of SAP CRM v6.0 [2007], the following seems apparent:
- Assignment of Roles is done via an assignment block in the Customer Maintenance view.
- You can create Business Partners in different roles initially.
- You cannot maintain Business Partner details in specific roles
However, you cannot display the role specific fields as you can in the WinClient. As an example, a Citizen Role BP will have different fields to that of a Teacher, but these roles could be assigned to one Business Partner.
There does not seem to be any guidance as to how this is managed in the WebClient and as it seems a fundamental part fo the SAP CRM offering, you would have thought that this questions has been asked, but I have found no answers.
I really hope anyone can help and appreciate any time and effort put into solving my question.
Many Thanks,
MatFlat.

Hi MatFlat,
Yes, your observation is right - in the Web UI, fiel grouping is not implemented for roles. This is because the role concept is quite different between SAP Gui and Web UI.
In SAP gui, (CRM 4.0) roles had a functional meaning as well as a UI control. However, the concept was changed with Web UI. Now, roles have only a functional meaning, and no effect on the UI at all.
If you want to implement role based field grouping in Web UI, you need to define your own methods in the implementation class.
E.g : you can write code to influence the field properties based on the roles. I guess you can redefine the DO_PREPARE_OUTPUT methods of the impl class.
In order to get info about which roles the BP is maintained , you can use FM BUPA_ROLES_GET_2.
Hope this helps you.
Cheers,
Rishu.

Disabling the Qty field for Input for Sub items in Sales Order and Delivery

Hi..
I have a requirement, where by we need to disable the qty field vbap-kwmeng for input for sub items of the BOM.
I am planning to use the user exit USEREXIT_FIELD_MODIFICATION...in the include MV45AFZZ for sales orders.
But i need to disable the input only after the BOM Explosion and item category determination in the sales order.
Can i Use the same exit ?? what additional conditions i need to take into account.
also we need to disable the delivery quantity field also for the sub items of this sales bom.
I see that this User exit is not available in delivery procesing. How to acheive the required functionality in the delivery processing...
your advice is much appreciated in this matter.
Regards
Srini

hi,
Route is determined
1.Country of Departure & Departure Zone taken from Shipping Point
2.Country of Destination & receiving Zone from Ship to party
3.Shipping condition from CMR
4.Transportation Group from MMR
5.Weight Group which is optional.
Check the above.
Route is determined in delivery.
ASHA

BADI/user exit for me22n - disable/grey out field quantity (MEPO1211-MENGE)

Dear all SAP gurus,
When changing PO (ME22N), I need to disable (grey out) the quantity field on item (MEPO1211-MENGE), when all scheduled quantity is already received (EKET-MENGE = EKET-WEMNG).
Have tried using LMEIGICJI and Handle_event method in CL_SCREEN_VIEW_MM. But still doesn't go to the screen that wants to be disabled.
Tried using BADI ME_PROCESS_PO_CUST, but couldn't find how to disable the quantity field.
(IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM only works for custom field).
Please kindly advise
thanks in advance

Hi Ahmad,
No need of ABAP, follow this IMG Path.
Material Management -> Purchasing - Purchase Order -> Define Screen Layout at Document Level
After Executing it . Choose ME22 from list and then choose display icon.
than double click Quantity and Price here uncheck opt. Entry and check display.
save your work.
Hope this works.
Regards
Ahsan

In the component overview screen of CO01 I want to disable all the field in screen of table control.I want to make it as output screen only.

Hi all
In the component overview screen of CO01 I want to disable all the field in screen of table control.I want to make it as output screen only.
Thanks & Regards,
Rajib.

Isn't that just exactly what transaction CO02 does? CO01 is for creating production orders so what sense does it make to have it display mode only?
Maybe your goal is to stop then end user changing the component assignment that is automatically detected by the system. If so, personally I think a better starting point would be PP configuration or user authorizations rather than looking to change the screen by whatever method. As we don't know what you are trying to achieve it's hard to offer much more advice maybe all you need is to change transaction to CO02

How to disable the text field in File upload element?

Hi,
How can we disable the text field in the "File upload" UI element so that the user won't be able to type the file path there, but he will still be able to browse the file using the Browse button?
Regards
Praveen

Hi Praveen,
This is not possible with the Web Dynpro File Upload UI element.
Thanks,
Samta

How to enable/disable the input fields based on the data entered/user action in the web dynpro abap?

How to enable/disable the input fields based on the data entered in the web dynpro application abap? If the user enters data in one input field then only the next input field should be enabled else it should be in disabled state. Please guide.

Hi,
Try this code.
First create a attribute with the name readonly of type wdy_boolean and bind it read_only property of input field of which is you want to enable or disable.
Next go to Init method.
Set the readonly value as 'X'.
DATA lo_el_context TYPE REF TO if_wd_context_element.
     DATA ls_context TYPE wd_this->element_context.
     DATA lv_visible TYPE wd_this->element_context-visible.
*   get element via lead selection
     lo_el_context = wd_context->get_element( ).
*   @TODO handle not set lead selection
     IF lo_el_context IS INITIAL.
     ENDIF.
*   @TODO fill attribute
*   lv_visible = 1.
*   set single attribute
     lo_el_context->set_attribute(
       name = `READONLY`
       value = 'X').
After that Go to the Action ENTER.
First read the input field ( first input field, which is value entered field) , next give a condition
if input value is not initial then set the readonly value is ' '.
DATA lo_nd_input TYPE REF TO if_wd_context_node.
     DATA lo_el_input TYPE REF TO if_wd_context_element.
     DATA ls_input TYPE wd_this->element_input.
     DATA lv_vbeln TYPE wd_this->element_input-vbeln.
*   navigate from <CONTEXT> to <INPUT> via lead selection
     lo_nd_input = wd_context->get_child_node( name = wd_this->wdctx_input ).
*   @TODO handle non existant child
*   IF lo_nd_input IS INITIAL.
*   ENDIF.
*   get element via lead selection
     lo_el_input = lo_nd_input->get_element( ).
*   @TODO handle not set lead selection
     IF lo_el_input IS INITIAL.
     ENDIF.
*   get single attribute
     lo_el_input->get_attribute(
       EXPORTING
         name = `VBELN`
       IMPORTING
         value = lv_vbeln ).
if lv_vbeln IS not INITIAL.
    DATA lo_el_context TYPE REF TO if_wd_context_element.
    DATA ls_context TYPE wd_this->element_context.
    DATA lv_visible TYPE wd_this->element_context-visible.
* get element via lead selection
    lo_el_context = wd_context->get_element( ).
* @TODO handle not set lead selection
    IF lo_el_context IS INITIAL.
    ENDIF.
* @TODO fill attribute
* lv_visible = 1.
* set single attribute
    lo_el_context->set_attribute(
      name = `READONLY`
      value = ' ' ).

How to disable role password in Solaris 11

Roles can only be assumed by logged in users. That is the definition of a role. Therefore role authentication is to some extent double authentication. The user has already authenticated as himself when he logged in and the sysadmin has enough trust in him to grant him a certain role. So why would he need to authenticate to the role? Isn't that double authentication ? Anyway I can see why that makes sense on a role like 'root' but on other more normal types of roles ? Really?
Anyway that is not what this posting is about. It is about me not being able to figure out how to disable role password in Oracle 11.
In Solaris 10 I would do:
<pre>passwd -r files -d myrole</pre>
That would set the myrole account to a no password account and that would be enough to disable it.
In Solaris 11 I cannot make this work. I suspect this is because of the introduction of the roleauth attribute but I've tried all possible combinations:
<pre>passwd -r files -d myrole</pre>
<pre>rolemod -K roleauth=user myrole</pre>
or
<pre>passwd -r files -d myrole</pre>
<pre>rolemod -K roleauth=role myrole</pre>
Can't make any of these work.
Pls help.

Hello MrMonza,
I do not completely understand what you are looking for. Perhaps it would help if you explained, for which purpose you want to use your new role.
In short, a role is simply a user account, to which you cannot login directly. As to every user account, rights are assigned to each role. And as for every user account, you have to provide a password for it.
If you want to switch to a role without password, this is nearly the same as extending the rights of your account.
This is possible by assigning additional profiles to it via /etc/user_attr. Privileged commands, written by you, and connected to these profiles, can be defined in /etc/security/exec_attr.d/local-entries. These commands can be called via pfexec, see pfexec(1), which grants privileges (e.g. uid=0) for just the call.
See also user_attr(4), prof_attr(4), exec_attr(4) and the "SEE ALSO" sections in there.
Profiles can be chosen from the predefined profiles in /etc/security/prof_attr.d, or they can be self-assembled from these profiles and authorizations from /etc/security/auth_attr.d.
New profiles should be stored in /etc/security/prof_attr.d/local-entries.

Disabling single Screen field

Hi Friends,
Plz help me how to disable single Screen field in Module pool.
I have a scenario where One of the field is drop down box,in that options if i select 1 option the next Input/outputfield and Group of radio buttons(2buttons) should be disable.
PlZ help me with the solution

hi
it may help u.
in drop down box each option should have function code.
now in pai
use
case ok_code.
when 'option 1'
loop at screen.
if screen name = 'group1' or screen name = ' input field name'.
screen input = 0.
modify screen.
endif.
endloop.
endcase.
or
if ok_code = 'option1'.
loop at screen.
if screen name = 'group1' or screen name = ' input field name'.
screen input = 0.
modify screen.
endif.
endloop.
regards
anil

Disabled input date field

Dear Techies,
i am using BSP with page flow logic.
I have a date field, my requirment is i have to mandate the usage of date field only through the calander help which is provided by the input field, it should be disabled by the keyboard entry only for dat field.
I disabled the input field on page load by using java script, and the input field is working fine, the changed value is appearing but the changed value is not being stored in the value attribute.
When i debug the javascript is overriding the disabled property, please help me how can this be achieved.
Regards
Imran.

hye Bhavana,
Thanks for the patience.
My requirement is:
i should have an input field of type date, which should not be input enabled but it should accept values from the calender help. That means user should select only date from calender, but he should not be in a position change or enter values from keyboard.
For this i have followed this approach.
i have my htmlb tag for input.
<htmlb:inputField id       = "tx"
                        value    = "<%= date %>"
                        showHelp = "X"
                        type     = "date" />
And i have javascript which will disable it at the client side. This will only disable the input from a keyboard, but when i select date from calander it appears in the input field which is as per my requirment.
Now when i am going for any eventing, the value in the input field is initialized. This is my problem. I want the input field to retain its value.
If i dont use the javascript and make it enabled input field, i dont have a problem in rendering the change in date.
So please give me any solution through the approach or i dont mind any new solution.
Hope it is clear and once again appriciate your effort in understanding.
Awaiting your response.
Regards
Imran.

Disable a mandatory field in ME21N (Material Group)

Hi Experts,
Material group field is mandatory in ME21N. I need to disable the control on this field, how can I do this ?
In fact, I need to disable this mandatory field for a PO creation in reference to a Contract.
Many thanks in advance for your help.
BR,
Cesar

Hi,
If PO is created with material number this field is get defaulted from material master basic data view. But If PO is with short text means without material number, then material group is mandatory anyway..Its stadard SAP program behavior.
You are saying this field should be optional in case of PO with refernce to contract? Does it mean that Contract is not with material and it is with short text? Please elaborate little bit on your requirement so as to answer d same.
Deepak.

Disable automatic shift fields filter

Hello! FCP is adding a Shift Fields filter automatically to my sequences. I understand the theory and purpose of Field Dominance but for my current sequences it DOES NOT need to be changed - I've tested it. This auto filter application is making extra work for me visa vie I need to delete each individually. Anyway to disable the automatic Field Dominance correction for a specific project / sequence?
Thanks!
- Christina

You can't disable it.
If you bring in a clip with a different field dominance to what your Sequence Setting is, the filter is applied.
You didn't mention it, but what video format are you working in, what is the Sequence Setting and what is the field dominance setting of your project?

How can we disable a particular field in BI,BCS Report in Portal

Hi Friends,
I have one doubt in Portal.
How can we disable a particular field in BI,BCS Report in Portal depending up on user.
For Exam: In Our Application can we divided in to 3 Categories. Managerial, Regional and Supervisor.
Manager having all authorizations. So here I donu2019t have any problem.
When Regional Manager logs in portal Depending up on that Regional Plant number will be in Disable mode.
EX: India Regional Manager logs in portal Plant number Files == IND123 Like in BI Report
       UK Regional Manager logs in portal Plant number Files == UK154   Like in BI Report
When Supervisor logs in portal Depending up on that Regional Plant number will be in Disable mode and also Company Code also in disable mode
EX: India Supervisor logs in portal Plant number Files == IND123 Like in BI Report and also Company code input file is ABC is in Disable mode
    In India Another Supervisor logs in portal
India Supervisor logs in portal Plant number Files == IND123 Like in BI Report and also Company code input file is ASD is in Disable mode
       UK Supervisor logs in portal Plant number Files == UK154   Like in BI Report and also Company code input file is XYZ is in Disable mode
This is my Req; How can we do there. Could you help me.
Give me these Ans:
1. Is it Feasible in portal.
2. Depending upon user we can disable particular filed in Portal.
3. Can we find out who is login in Portal. by Using BI System. in WDJ We can Find out Like IUSER Code Same as BI Developer also Find it. Is it Possible or not.
Regards
Vijay Kalluri

no

Mass Roles Comparison in ECC System

Hi Forum,
I am know working on Role-Redesign project, which involves about 4000 roles.
We have to eliminate the roles, which have same transactions and activities.
SUIM provides only single role comparison....
Is there any possibility to compare set (range of) of roles with a set (range of) of role in ALL-COMBINATIONS.
Regards.
Sathish Ram.

Hi Surya,
There is one way. Download the roles in excel files. I would suggest not more than 80-100 roles in one go. Then for each file convert the various columns into one column using concatenate function. Now for a given set of roles you will 2 files one for each of the involved systems. Now create a third files in which you collate the date from both the original source files and then do a column comparision. It is tedious but in given circumstances the shortest way. I think it will take less time then do role comparision on one to one basis. Take help from an MS excel expert.
Regards.
Ruchit.

GRC 5.3 | ERM | Disabled Role Comparison Field

Similar Messages

Maybe you are looking for