GRC AC 10.0 - BRM - Methodology is not working

Hi Gurus!
I'm having an issue with BRM component.
I've configured all steps necessary for role maintenance, as it's indicated in document "AC 10.0 - Business Role Management".
I'll be creating derived roles, composite roles, simgle roles and profiles. There is a methodology defined, and 5 phases for the creation are set.
When creating a single role, methodology works OK. However, the rest of the roles doesn't have those 6 phases: composite has 4 and derived and profile have 2.
Do you know ahy this happens and how can I solve it? Prints will be given if needed.
Thank you in advance!

Hi Colleen,
I've configured all settings you mentioned, you can see them in the screen shots. Also, i've pressed "Save" button but it did not bring the methodology.
BRFplus rule was created from SPRO and BRF+.

Similar Messages

  • IDM - GRC AC 5.3 integration - workflow detour not working as expected

    Hi IDM Experts!
    I would greatly appreciate your help with the problem we're currently facing; when integrating IDM with GRC, we have configured 2 CUP workflows; one for handling requests with SoD violations (Workflow B) and one to handle ones without any SoD violations (Workflow C), with the former handling risk analysis followed by role approval, and the latter handling only role approval; we have one path with one stage configured as "No Stage" (Workflow A); this path is used to decide which of the primary workflows to use (i.e. SoD violations or no SoD violations) using two detours; we have one detour configured to use Workflow B if any SoD violations are found in the request and another detour configured to use Workflow C if no SoD violations are found.
    Currently what happens in our tests is that requests without risks / SoD violations work fine and actually get detoured to Workflow C, awaiting role approval from the right approver ; while requests with inherent risks / SoD violations unforutnately get automatically approved and provisioned rather than being sent to Workflow B
    Any clues as to why this could be happening? We've checked if there are any settings that might be triggering it to automatically approve requests despite any risks, but can't find anything of the sort; Would be very grateful for any insight / advice on the issue.
    Thanks a lot in advance!
    Best regards,
    Sandeep

    Hi Diego!
    Once again; thank you for your quick reply!
    I did recheck the auto-provisioning issue and I can confirm that it is definitely set to "No Auto-provisioning" and it hasn't been changed recently. The strange thing is that the detour works for NO SoD violations, but doesn't work for SoD violations; find below the audit trail for detour working:
    Request XXX Submitted by Sandeep (SANDEEP) on 01/28/2012 02:04 
       Z_111111-ECC Role Added with validity dates 01/28/2012-12/31/9999
    Request submitted for approval by admin(system) on 01/28/2012 02:04 
    Approved by Sandeep (SANDEEP) on behalf of Sandeep (SANDEEP) at path WORKFLOW_A and stage WORKFLOW_A on 01/28/2012 02:04 
       Approved Z_111111-ECC role for Add action with validity dates 01/28/2012-12/31/9999
    Request has taken a detour to path C_WORKFLOW and stage C_STAGE on 01/28/2012 02:04 
       Detour condition SOD Violations with value No is satisfied at path WORKFLOW_A and stage WORKFLOW_A
    and find below the audit trail for the detour not working:
    Request YYY Submitted by Sandeep (SANDEEP) on 01/28/2012 01:53 
       Z_222222-ECC  Role Added with validity dates 01/28/2012-12/31/9999
    Request submitted for approval by admin(system) on 01/28/2012 01:53 
    Approved by Sandeep (SANDEEP)  on behalf of Sandeep (SANDEEP)  at path WORKFLOW_A and stage WORKFLOW_A on 01/28/2012 01:53 
       Approved Z_222222-ECC role for Add action with validity dates 01/28/2012-12/31/9999
    Request Closed By Sandeep (SANDEEP) on 01/28/2012 01:53 
    I even checked the CUA System section, and the "By system" tab and it was empty; there were no specific system configurations.
    And to answer your questions:
    Since Workflow A is the path with the Initiator, the detour flag is deactivated and the active flag is activated.
    WF B & C have both the active and detour flags activated.
    Thanks a lot again for your quick responses and all the help you've provided so far!
    Best regards,
    Sandeep

  • GRC CUP 5.3 SP16, detour path not working for SOD violations

    Hi,
    Something bazaar is going on in our requests processing and not sure if that's the way SAP has set it up.
    We configured a detour path for requests with SOD violations to go to the additional stage of 'SOX Approver' but the first stage (manager) does the risk analysis and Mitigation assignment and then it goes to Role owner approver that approves the roles access. Once the role owner approves the roles , if the request had SOD violations, even if the mitigation was selected and approved by the manager stage, it needs to go to the SOX approver stage to approve the mitigation assignment before the request can be auto provisioned for any requests that had sod violations.
    But it seems to skip the sox approver detour path stage after the role owner approval and go directly to auto provisioing. I thought that any requests that had sod violations inspite of having mitigation assignment in a previous stage can be detoured to the next path for SOX approval and then auto provisioned. Since SAP doesn't give different approval option to approve mitigation vs. approve roles, wherever you make the risk analysis mandatory, that's where the mitigation controls have to be assigned. But we want the option to detour the path to SOX approver to approve those mitigation controls b4 auto provisioning the request.
    Any idea of how to fix this?
    Is the detour only going to work if the mitigation wasn't assigned? But then how can you get approval for the mitigation on a different stage if the same person has to assign and approve that?
    Will appreciate any feedback in this.
    Thanks,
    Alley

    I was actually able to resolve the issue by adding the role approver stage first to the sox approver detour path.. this way..if the manager has roles with sod violations and updates mitigations for it, it goes to the role approver via detour path as well first and then to the sox approver stage b4 auto provisioining. So, that solved our problem. And if the request doesn't have SOD violations then it just goes to the next stage without detour which also has the role approver as the last stage.
    Since I couldn't get the sox approver stage to show up after the role approver as originally anticipated since the request already had mitigation assigned at the manager level, we did the above scenario to fix the issue.
    Requestor>Manager->Role Approver-->auto provisioning (without SOD violations)
    Requestor>Manager> Detour (Role Approver>SOX Approver)->Auto Provisioning (with SOD violations)

  • GRC 10.0: Access Request Creation - LDAP user advanced search not working

    Dear Experts,
    We are implementing SAP GRC Access Control and we have an issue in Access Request Creation. If we put the user name in “User” field and press intro, the user details are updated, but if we want to make an "Advanced search" the user is not found and the application give us the following message: “No records found for the search criteria entered.”
    Scenario 1: If we put the user name in “User” field and press intro, the user details are updated:
    Scenario 2: If we want to make an "Advanced search" the user is not found and the application give us the following message: “No records found for the search criteria entered.”
    We are using the Active Directory as Data Source.
    Thanks and Regards.

    Hi Jose,
    Try maintaning the parameter 2050 as YES and check once.
    Kindly, also make refer to  the below list of SAP notes:
    1757906 - GRC 10.0 - LDAP user search does not work in NWBC
    1745370 - LDAP search in GRC does not work anonymously
    1718242- UAM: User search not working in Access Request.
    Regards,
    Neeraj Agarwal

  • GRC AC 5.3 Detour not working as expected in workflow

    Hi GRC Experts!
    I would greatly appreciate your help with the problem we're currently facing; we have configured 2 CUP workflows; one for handling requests with SoD violations (Workflow B) and one to handle ones without any SoD violations (Workflow C), with the former handling risk analysis followed by role approval, and the latter handling only role approval; we have one path with one stage configured as "No Stage" (Workflow A); this path is used to decide which of the primary workflows to use (i.e. SoD violations or no SoD violations) using two detours; we have one detour configured to use Workflow B if any SoD violations are found in the request and another detour configured to use Workflow C if no SoD violations are found.
    Currently what happens in our tests is that requests without risks / SoD violations work fine and actually get detoured to Workflow C, awaiting role approval from the right approver ; while requests with inherent risks / SoD violations unforutnately get automatically approved and provisioned rather than being sent to Workflow B
    Any clues as to why this could be happening? We've checked if there are any settings that might be triggering it to automatically approve requests despite any risks, but can't find anything of the sort; Would be very grateful for any insight / advice on the issue.
    Thanks a lot in advance!
    Best regards,
    Sandeep

    Hi Diego!
    Once again; thank you for your quick reply!
    I did recheck the auto-provisioning issue and I can confirm that it is definitely set to "No Auto-provisioning" and it hasn't been changed recently. The strange thing is that the detour works for NO SoD violations, but doesn't work for SoD violations; find below the audit trail for detour working:
    Request XXX Submitted by Sandeep (SANDEEP) on 01/28/2012 02:04 
       Z_111111-ECC Role Added with validity dates 01/28/2012-12/31/9999
    Request submitted for approval by admin(system) on 01/28/2012 02:04 
    Approved by Sandeep (SANDEEP) on behalf of Sandeep (SANDEEP) at path WORKFLOW_A and stage WORKFLOW_A on 01/28/2012 02:04 
       Approved Z_111111-ECC role for Add action with validity dates 01/28/2012-12/31/9999
    Request has taken a detour to path C_WORKFLOW and stage C_STAGE on 01/28/2012 02:04 
       Detour condition SOD Violations with value No is satisfied at path WORKFLOW_A and stage WORKFLOW_A
    and find below the audit trail for the detour not working:
    Request YYY Submitted by Sandeep (SANDEEP) on 01/28/2012 01:53 
       Z_222222-ECC  Role Added with validity dates 01/28/2012-12/31/9999
    Request submitted for approval by admin(system) on 01/28/2012 01:53 
    Approved by Sandeep (SANDEEP)  on behalf of Sandeep (SANDEEP)  at path WORKFLOW_A and stage WORKFLOW_A on 01/28/2012 01:53 
       Approved Z_222222-ECC role for Add action with validity dates 01/28/2012-12/31/9999
    Request Closed By Sandeep (SANDEEP) on 01/28/2012 01:53 
    I even checked the CUA System section, and the "By system" tab and it was empty; there were no specific system configurations.
    And to answer your questions:
    Since Workflow A is the path with the Initiator, the detour flag is deactivated and the active flag is activated.
    WF B & C have both the active and detour flags activated.
    Thanks a lot again for your quick responses and all the help you've provided so far!
    Best regards,
    Sandeep

  • GRC CUP Error creating request. Approver not found

    Hi,
    We just upgrade from GRC CUP 14 to GRC CUP 15.6 support pack.I already performed post upgrade steps and when i try to create a request i am getting approver not found.i didnot change workflow.In stage for role approver we have approver determinator "role".
    system log report
    com.virsa.ae.workflow.NoApproverFoundException: No approvers found for req no : 493, for reqPathId, 662, for path, PROD_APPRV_PATH and approver determinator : Role
         at com.virsa.ae.workflow.bo.WorkFlowBOHelper.handleApproversTransactions(WorkFlowBOHelper.java:1469)
         at com.virsa.ae.workflow.bo.WorkFlowRequestCreateHelper.handleWFForNewPath(WorkFlowRequestCreateHelper.java:278)
         at com.virsa.ae.workflow.bo.WorkFlowRequestCreateHelper.createNewWorkflow(WorkFlowRequestCreateHelper.java:167)
         at com.virsa.ae.workflow.bo.WorkFlowBO.saveNewWorkflow(WorkFlowBO.java:120)
         at com.virsa.ae.accessrequests.bo.RequestBO.saveNewRequest(RequestBO.java:579)
         at com.virsa.ae.accessrequests.actions.CreateRequestAction.createRequest(CreateRequestAction.java:381)
         at com.virsa.ae.accessrequests.actions.EUCreateRequestAction.createRequestHandler(EUCreateRequestAction.java:135)
         at com.virsa.ae.accessrequests.actions.EUCreateRequestAction.execute(EUCreateRequestAction.java:68)
         at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:295)
         at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:431)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
         at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:461)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Please let me know solution ASAP.This is high priority.
    Thanks
    Yakoob.

    It looked like some old request stuck in DB.But, not sure about it.I tried by changing the number ranges in configuration by giving the current request number in "from number",but it didn't work.
    This is strange some time it gives "error creating request: path not found." and once this error gone then "error creating request : approver not found".
    To avoid this i created one more stage by custom approver determinator with application attribute and approver assiged.This stage, i assigned before role approver stage then it worked,Request get created and request get provisioned.
    i don't understand why it's not working,if i assigned role approver stage first in a path of workflow.role approver (approver determinator:"role" standard one, "approver" gets from configuration:roles:create role:role approver OR upload from role import).
    Please help
    Thanks
    Yakoob.

  • Application not working on Portal

    Hi,
    I have a query regarding one of the application. The application is a transactional app like creating a new supplier/material.
    When i execute the application from backend ECC, it is running fine but the same application is not working on Portal.
    The application is working fine from NWBC as well. The problem is that the application navigation is not happening when i click on Create and throwing below errors. Please suggest at the earliest.
    com.sap.portal.appintegrator.sap.Generic::Generic/ConnectionLayer
    MandatoryParameters
    OptionalParameters
                         SAP_LocalSystem                     DE1CLNT110                     DE1CLNT130                     DF1CLNT100                     DG1CLNT100                     SAP-GRC                     SAP-GRC-AC                     SAP_BI                     SAP_ECC                     SAP_ERP_Common                     SAP_FMDM                     SAP_GATEWAY                     SAP_GRC                     WebEx              
    Authentication
    DebugMode
                         No                     Yes              
                         GET                     POST              
    Regards,
    Yuvraj

    Hi Yuvraj,
    Well, as it turns out.. we're at SP12 and this note does not apply for us. It's not really a solution for our system and we're still looking for the reason for this behavior of the portal.
    On the other hand, you've opened this thread and you are the only one who can award points and mark certain solution as correct
    Regards,
    Boris

  • Download to Excel Not working in Mozilla Firefox

    Hi Friends
    I have wriiten code for downloading data as a Excel file from a webdynpro application using the below methodology.
    ht[http://wiki.sdn.sap.com/wiki/display/WDABAP/Downloadafileintoexcelsheet|http://wiki.sdn.sap.com/wiki/display/WDABAP/Downloadafileintoexcelsheet]
    It works fine in Internet Explorer 7.0. Its not working in Mozilla Firefox 3.6. Our current SAP Version is ECC 6.0 EHP4 (NW7.01).
    Please provide some insight into the issue.
    Thanks a lot.
    Regards
    Rakesh

    Hi Rakesh
    Please check the browser compatibility in Product availability Matrix in service market place for your server version.
    Loging with SMP userid and password at http://service.sap.com/pam
    Best Regards
    Srinivas

  • Daisy chain isight imovie not working

    Hi,
    I am currently botting my mac mini off an external hard drive. When I daisy chain the isight it works fine with ichat, but it fails to work with imovie. What happens is that it works for approx. 10 to 15 seconds and then the image skips(like an old tv skipping horizontally) and the image freezes. Any help would be widely appreciated.
    Thanks,
    Gmas.

    You're welcome, Gmas.
    And thank you for the kind words. It sounds like you have a good plan.
    Bill's good suggestion may give you what you want if you can try that.
    ... it seems that the only option is buying a powered hub that works.I can think of some others:
    -Be sure you have NO unnecessary apps running while you are recording.
    -If you are using FileVault, try turning that off. There are known issues with FileVault and iMovie.
    -You can try booting from your internal drive when you want to use iSight to see if iSight works acceptably with iMovie that way.
    -You can make very short clips and edit them together in iMovie.
    -Try adding light. Many who post here experience an iMovie video "freeze" that is not related to which drive is being used to boot. There seems to be a wide variation in how long recording can be done before the freeze occurs. Perhaps you are just experiencing the "iMovie freeze"? You can search iSight Discussions (up on level) for "iMovie freeze" (without the quote marks) to find several other users' experiences.
    -The iMovie freeze can be caused by low light. iSight switches to 15 frames-per-second to improve picture quality in low-light conditions. This causes a conflict with iMovie, which expects standard DV input at a fixed frame rate.
    -As explained in David Babsky's "Various iMovie/iSight problems" msg # 1, Jul 14, 2005 response to your post in iMovieHD Discussions, more light, iMovie HD, and keeping other apps that use iSight closed may (my emphasis) help.
    -Try another app like EvoCam. The fifth item in the EvoCam FAQ claims that they have a fix for the iMovie freeze. Their work-around involves resetting the video channel. You can do the same thing manually in iMovie by just making shorter clips and editing them together.
    -Although I do not know any that yield better results, there are other video clip capture apps included in the Some Applications you can use with iSight FAQ.
    -For more specific iMovie help, you may also want to check out the FAQs and posts in the iMovie Discussions area applicable to the version you use. The iMovie users are watching there.
    I know you wish it would work differently, but it obviously is not working the way you want. Perhaps one of these work-arounds can help you accomplish your desired outcome, even if you cannot attain it via your preferred methodology.
    Please let us know if you find a satisfactory solution.
    Cheers
       <small>EZ Jim</small>

  • Scling is not working in firefox

    I tried to scale my div elements. In chrome, Scaling is working good. but in firefox not working properly. Can u please help to scale my div elements. If scaling methodology is different from chrome means, then provide the firefox Scaling method.
    My scaling output:-webkit-transform: scale(0.09, 0.24793650793650793);
    -webkit-transform-origin: 0px 0px;
    Chrome working fine... Firefox not working

    Firefox isn't a WebKit based browser.
    https://developer.mozilla.org/en-US/docs/Web/CSS/transform

  • Template editable region not working

    I am using DW2004.  I have a template with a number of editable regions.  One region is causing me problems.  When I apply the template to a page, the BeginEditable and EndEditable tags become editable themselves.  Trying to save the page causes errors about saving changes to regions that cannot be edited.
    The template has this editable region:
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!--MainText-->
    <div id="MainText">
          <div align="left">
    <!-- TemplateBeginEditable name="MainText" -->
            Main Text
    <!-- TemplateEndEditable -->
        </div><!-- Align text left -->
    </div><!-- MainText-->
    MainText is a CSS style
    #MainText{float:right; width:565px; margin: 0 0 0 0; background-color:#ffffff;}
    In the document after the template is applied, I get the following.
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!--MainText-->
    <div id="MainText">
      <div align="left">
    <!-- #BeginEditable "MainText" -->
      <table width="329" border="0" cellpadding="10">
    Problem is the <!-- #BeginEditable "MainText" --> can be changed.  If I do a return after the "-->" the tag is no longer able to be changed.  Same with the end editable tag.  As soon as I go back to Design view, the code changes to become editable again.
    At the moment I have around 150 screwed up pages after running a template update.  Can anyone help?

    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
    <html><!-- #BeginTemplate "/Templates/tem_gen_pp.dwt" --><!-- DW6 -->
    <head>
    <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!-- Title -->     
    <!-- #BeginEditable "doctitle" -->
    <title>Project interviewing techniques white paper</title>
    <!-- #EndEditable -->
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!-- Meta Info -->     
    <!-- #BeginEditable "MetaInfo" -->
    <meta name="description" content="White Paper on Project Documentation">
    <meta name="keywords" content=" project perfect, project management, project manager, project, project consulting, project training, Sydney, Australia, project management white paper, ">
    <meta name="robots" content="index,follow">
    <!-- #EndEditable -->
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!-- External Files -->
    <link href="css/standard.css" rel="stylesheet" type="text/css">
    <SCRIPT LANGUAGE="JavaScript" SRC="css/standard_javascript.js"></SCRIPT>
    </head>
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!-- Other Scripts -->
    <!-- #BeginEditable "OtherScripts" -->
    <!-- #EndEditable -->
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
        <!-- #BeginEditable "Head" -->
    <!-- #EndEditable -->
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <body>
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!-- Wrapper to centre the page -->
    <div id="wrapper">
    <div id="center">
    <table width=800px height="84" border="0" cellpadding="5" cellspacing="0" bgcolor="#3333FF">
        <tr>
          <td height="84" width="8%"> </td>
          <td width="3%" bgcolor="#000099"> </td>
          <td width="9%" bgcolor="#FFFFFF"><img src="images/logo/PP_P_only.jpg" width="84" height="84"></td>
          <td width="2%"></td>
          <td width="60%" height="84" valign="top"><br>       
              <span class="style12 ">PROJECT </span>
            <span class="style12 "><strong>PERFECT</strong></span><BR>       
            <span class="style13">                 Project Management Software</span><br>                                <span class="style14">                                                       Specialists  in Project Infrastructure</span>
          </td>
          <!-- Image top right -->         
          <td height="84" width="18%"> 
            <!-- #BeginEditable "Title" -->
            <div align="center"><a name="top"></a><img src="images/titles/title_free_info.gif" width="115" height="80"></div>
          <!-- #EndEditable -->     
            </td>
        </tr>
      </table>
    </div><!-- Center -->
    <div id="Navigation">
    <fieldset> <legend><b>Menu</b> </legend>
    <table width="195" border="0" cellpadding="0" cellspacing="0" bordercolor="#000000" bgcolor="#FFFFFF" >
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!-- Home Page -->
        <tr>
          <td>
            <a href="index.htm" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('Image17','','images/miscellaneous/homeon.jpg',1)"><img src="images/miscellaneous/homeoff.jpg" alt="Project Management Software Home Page" name="Image17" width="140" height="35" border="0"></a> </td>
        </tr>
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!-- Subscribe -->     
        <tr>
          <td  bgcolor="#FFFF00"><div align="center" class="style15"><strong>Sign up for our newsletter. Hear about new Project Management White Papers.<br>
                <br>
            When you subscribe you can download a free eBook<br>
            <br>
    &quot;The Project Managers Guide to Creating and Managing Requirements&quot;       
                </strong></div>
            <p align="center"><a href="http://projectperfect.com.au/mailman/listinfo/subscribers_projectperfect.com.au">Click Here to Join </a>       
            <p>
            </td>
        </tr>
        <tr>
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!-- RSS -->     
    <td valign="top"> 
          <h5 align="center" class="style4"><a href="rss/rss_news.xml" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('Image15','','images/miscellaneous/xml.gif',1)"><img src="images/miscellaneous/rss.gif" alt="RSS News Feed" name="Image15" width="36" height="14" border="0"></a></h5></td>
        </tr>
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!--PA Home Page -->
        <tr>
          <td valign="top"><a href="pa.htm" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('project-management-software','','images/miscellaneous/pmsoftwa reon.jpg',1)"><img src="images/miscellaneous/pmsoftwareoff.jpg" alt="Project Management Software" name="project-management-software" width="140" height="35" border="0"></a></td>
        </tr>
        <tr>
           <td width=165px ><h5>              <a href="pa_download_enq.htm">&gt;Download 30 day trial </a><br>
                <a href="pa.htm">&gt;General Info</a><br>
                <a href="pa_cost_justification.htm">&gt;Cost Justification</a> <br>
                <a href="pa_faq_buyers.htm">&gt;FAQ for PA Buyers</a><br>
                <a href="pa_pricing.htm">&gt;Pricing</a><br>
                <a href="http://www.projectperfect.com.au/catalog/index.php/cPath/21">&gt;Buy Now</a></h5></td>
        </tr>
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!-- Method H Home Page -->
        <tr>
          <td valign="top"><a href="method_h.htm" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('business-analysis-software','','images/miscellaneous/basoftwar eon.jpg',1)"><img src="images/miscellaneous/basoftwareoff.jpg" alt="Business Analysis Software" name="business-analysis-software" width="140" height="35" border="0"></a></td>
        </tr>
        <tr>
          <td width=165px><h5>       
              <a href="method_h.htm">&gt;&quot;Method H&quot; General Info</a><br>
            <a href="http://www.projectperfect.com.au/catalog/index.php/cPath/22">&gt;Pricing</a><br>
            <a href="http://www.projectperfect.com.au/catalog/index.php/cPath/22">&gt;Buy Now</a></h5></td>
        </tr>
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!-- Free Stuff -->    
        <tr>
          <td valign="top"><a href="services.htm" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('project-management-white-papers','','images/miscellaneous/whit epaperon.jpg',1)"><img src="images/miscellaneous/whitepaperoff.jpg" alt="Project Management white papers, links and free stuff" name="project-management-white-papers" width="140" height="35" border="0"></a></td>
        </tr>
        <tr>
          <td width=165px><h5>       
                  <a href="wp_index.php">&gt;White Paper Index</a><br>
                <a href="student.htm">>PM for Kids </a><br>
                <a href="RM3/index.php">&gt;Resources</a></h5>
          </td>
        </tr>
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!-- Consulting -->     
        <tr>
          <td valign="top"><a href="consult_train.htm" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('consulting','','images/miscellaneous/serviceson.jpg',1)"><img src="images/miscellaneous/servicesoff.jpg" alt="Project Infrastructure Consulting Services" name="PM Services" width="140" height="35" border="0"></a></td>
        </tr>
        <tr>
          <td width=165px><h5>       
                  <a href="consult_train.htm">&gt;Consulting</a><br>
                <a href="microsoft-access-development.htm">&gt;Microsoft Access Development</a><br>
                <a href="assessment.htm">&gt;PM Assessment</a></h5></td>
        </tr>
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!-- Blog -->     
        <tr bgcolor="#FFFFFF">
          <td valign="top"><a href="blog/index.php" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('Image16','','images/miscellaneous/blogon.jpg',1)"><img src="images/miscellaneous/blogoff.jpg" alt="Project Management Blog" name="Image16" width="140" height="35" border="0"></a></td>
        </tr>
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!-- Contact -->     
        <tr>
          <td valign="top">  
          <a href="contact_index.htm" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('Image18','','images/miscellaneous/contactuson.jpg',1)"><img src="images/miscellaneous/contactusoff.jpg" alt="Contact Project Perfect" name="Image18" width="140" height="35" border="0"></a></td>
        </tr>
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!-- Search --> 
        <tr>
          <td valign="top">  
          <a href="search.htm" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('Image19','','images/miscellaneous/searchon.jpg',1)"><img src="images/miscellaneous/searchoff.jpg" alt="Search Project Perfect site" name="Image19" width="140" height="35" border="0"></a></td>
        </tr>
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!-- Contents --> 
        <tr>
          <td height="2" valign="top">  
          <a href="contents.htm" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('contents','','images/miscellaneous/contentson.jpg',1)"><img src="images/miscellaneous/contentsoff.jpg" alt="Contents of Project Perfect web site" name="contents" width="140" height="35" border="0"></a></td>
        </tr>
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!-- Spread the word -->
          <tr>
            <td><a href="cgi-bin/birdcast.cgi" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('tell-a-friend','','images/miscellaneous/tellafriendon.jpg',1)" ><img src="images/miscellaneous/tellafriendoff.jpg" alt="Tell a friend about project perfect" name="tell-a-friend" width="140" height="35" border="0"></a></td>
          </tr>
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
        <!-- Generic Ad for PA -->
          <tr>
            <td><img src="images/miscellaneous/Ver4.jpg" width="200" height="250"></td>
          </tr>
    <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!-- PM Opininons Ad -->   
         <tr>
          <td height="2" valign="top" bgcolor="#FFFFCC"><fieldset>
            <p align="center"><a href=http://www.project-management-opinions.com/index.php?option=com_mtree&task=viewlink&link_i d=653 ><img src=
                      "http://www.project-management-opinions.com/rate_us_14.jpg" alt="Rate us at PM Opinions!" title="Rate us at PM Opinions!" vspace="5" width="88" border="0" height=                  "65" hspace="5"></a> </p>
          </fieldset></td>
        </tr>
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!-- Method 123 -->
        <tr>
          <td height="2" valign="top"><a href="http://www.mpmm.com/project-management-software-products.php?AID=$AffiliateIDN$"><a href=                                "http://www.mpmm.com/index.php?AID=070754 "><img src="http://www.mpmm.com/images/banners/logo-160x50.gif" width="160" height="50" border="0" alt=                                "Project Management Methodology, Project Management Process, Project Management Methodologies"></a></td>
        </tr>
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!-- Adspace-->
        <tr>
          <td height="2" >
        <!-- #BeginEditable "adspace" -->
         <p>
        <!-- #EndEditable -->
          </td>
        </tr>
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!-- RSS Widget -->   
        <tr>
          <td valign="top"><script type="text/javascript" src="http://widgetserver.com/syndication/subscriber/InsertPanel.js?panelId=9bd60456-9247-49e5-9 463-5da9e1871c2f"></script>                           <noscript>Get great free widgets at <a href="http://www.widgetbox.com">Widgetbox</a>!</noscript></td>
        </tr>
    <!-- Blank Cell -->   
        <tr>
          <td valign="top"> </td>
        </tr>
      </table>   
    </fieldset>
    </div><!-- Navigation -->
        <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
    <!--MainText-->
    <div id="MainText">
          <div align="left">
    <!-- #BeginEditable "MainText" -->
      <table width="329" border="0" cellpadding="10">
        <tr>
          <td width="305" height="27"><font size="-2"><a href="index.htm">Home</a></font><font size="-2">- </font><font size="-2"><a href="wp_index.php">White Paper Index</a></font></td>
          </tr>
      </table>
      <table width="100%" border="0" cellspacing="0" cellpadding="0">
        <tr>
          <td width="75%"><h1 align="center">Project Interviewing Techniques </h1>
          </td>
          <td width="25%"><div align="center">First published March 08 <br>
          </td>
        </tr>
        <tr>
          <td width="75%"><div align="center">
              <h4>Neville Turbit - Project Perfec</h4>
          </div></td>
          <td width="25%"><div align="center"><b>Rating</b></div></td>
        </tr>
        <tr>
          <td width="75%"><div align="center"><font size="-1"><a href="downloads/Info/info-project-interviewing-techniques.pdf">(Download pdf version)</a></font></div></td>
          <td width="25%"><div align="center">
            <?php
    $topic="interv";
    $display="stars";
    require "/home/projectp/public_html/b3r/b3_rating/b3_rating.php";
    ?>
          </div></td>
        </tr>
      </table>
      <h2> Overview</h2>
      <p> <span class="style15"><a href="pa.htm"><img src="images/pa_general/pa_advt_2.gif" alt="Get Organised with Project Administirator Software" width="250" height="150" border="0" align="right"></a></span>As a Project Manager, it is inevitable you will have to carry out project interviews. They might range from interviewing a candidate for a project team role, to interviewing a Sponsor about their expectations on a project. Rarely are people given training on interviews. It is just expected that like breathing, it comes naturally. </p>
      <p>Nothing could be further from the truth. Interviewing is a technique, and as such it needs to be taught. Some people are naturals and some struggle. If you doubt there is skill involved, turn on your TV and watch a professional interviewer on a current affairs type program. In this article, we attempt to cover a few of the basics that will make you a better interviewer.</p>
      <p align="center"><font face="trebuchet ms, arial, helvetica" color="#006666"><img src="images/miscellaneous/dividing_line.gif" width="300" height="10"></font></p>
      <h2>My Experiences</h2>
      <p>Many years ago I took over a role as Marketing Manager in a financial services organisation. The week I arrived, it became evident that the company had a big hole in their investment portfolio and investors were about to loose lots of money. If I had known before, I might not have taken the job. I was to suddenly have to face the media and break the news. I had never thought much about being interviewed in the past but suddenly it became a significant concern. </p>
      <p>The company called in a specialist who would prepare me over a number of days to handle interviews. In our first mock interview he had me blabbering nonsense in about a minute. We then went back to basics and he spent a week teaching me about interviewing techniques. By the end of the week I was confident to face the media and get my message across in a way that did not cause a run on the institution, and gave investors confidence that if they stayed with the organisation, within a year their losses would be recouped. In fact the majority did stay, and they did get their money back.</p>
      <p>While I was on the other side of the fence (the interviewee), I also had to learn more about interviewing than I ever expected there was to know. Here is a simple thing I was taught in the first hour or so. You can see it on TV every night. Invade personal space. </p>
      <p>A reporter on TV who is standing beside a person being interviewed has to stand close so they both fit on the screen. Typically this involves being within less than half a metre (about a foot) from the person. You can use this to your advantage with someone who has not had the benefit of media training to make them feel uncomfortable. </p>
      <p>Try it on a colleague. Ask them an awkward question while standing up close to them. You can see them squirm. Ask the same question across the room, and they may show mild discomfort but nothing like the level when you are up close to them. Also see what happens when the reporter is trying to make the person comfortable. They move further away. In fact they may want to make them relax by putting some space between them before getting up close and personal for the killer questions.</p>
      <p align="center"><font face="trebuchet ms, arial, helvetica" color="#006666"><img src="images/miscellaneous/dividing_line.gif" width="300" height="10"></font></p>
      <h2>Open and Closed Interviews</h2>
      <p>Interviews can be either &ldquo;Open&rdquo; or &ldquo;Closed&rdquo;. Usually interviews are a mixture of both. We will cover how each type of interview is carried out, and the pros and cons of &ldquo;Open&rdquo; versus &ldquo;Closed&rdquo;. Managing an Interview around &ldquo;Open&rdquo; and &ldquo;Closed&rdquo; questions is a key skill of the interviewer.</p>
      <p align="center"><font face="trebuchet ms, arial, helvetica" color="#006666"><img src="images/miscellaneous/dividing_line.gif" width="300" height="10"></font></p>
      <h2>Definition - Open and Closed Questions</h2>
      <p>An open interview is one where questions are not specific. They are open ended and designed to allow the person to cover a broad range of topics. As an example</p>
      <p>&ldquo;Tell me about sales?&rdquo; is an open question.</p>
      <p>&ldquo;What were sales for your territory last month?&rdquo; is a closed question.</p>
      <p>The first question may take half an hour to answer. The second will probably take less than a minute.</p>
      <p align="center"><font face="trebuchet ms, arial, helvetica" color="#006666"><img src="images/miscellaneous/dividing_line.gif" width="300" height="10"></font></p>
      <h2>Why use Open Questions</h2>
      <p>It all depends on what you already know and what you need to know. If you are absolutely confident you are fully briefed on a topic, and there is only one fact you need to determine, a closed question is preferable. On the other hand, if your knowledge is sketchy, and you are not even sure what questions to ask, an open question is the way to go.</p>
      <p>If your washing machine is broken and the repair man tells you the water pump is not working, you are unlikely to ask him is it the shaft is worn, impeller is split or motor burnt out? That would be a closed question and we probably don&rsquo;t have the knowledge to ask it anyway (Incidentally I did make that up. I have no idea what else could break). We would ask an open question such as asking him to explain further. At that point he might explain it is the impeller broken because some coins got through the filter and jammed in the pump. You can then follow up with a more closed question about what that means to the repair and your wallet.</p>
      <p align="center"><font face="trebuchet ms, arial, helvetica" color="#006666"><img src="images/miscellaneous/dividing_line.gif" width="300" height="10"></font></p>
      <h2>Essence of Open Questions</h2>
      <p>The essence of open interview technique is - </p>
      <ul>
        <li>Question move from the general to the specific and back to the general</li>
        <li>Much is deduced from listening and probing. A simple comment may indicate an important area to be explored</li>
        <li>There are often unforeseen topics raised. Some are relevant and some may not be relevant. You need to filter and quickly dismiss the ones that are not relevant</li>
      </ul>
      <p align="center"><font face="trebuchet ms, arial, helvetica" color="#006666"><img src="images/miscellaneous/dividing_line.gif" width="300" height="10"></font></p>
      <h2>Tips for Open Questions</h2>
      <p>Here are a number of tips for asking open questions</p>
      <ul>
        <li>Think if the person can answer &ldquo;yes&rdquo; or &ldquo;no&rdquo;. If the answer is they can, it is not an open question</li>
      </ul>
      <ul>
        <li>If the person provides a wandering answer, or a &lsquo;brain dump&rsquo; offer a summary of the question - let the interviewees confirm its accuracy. <br>
    &ldquo;If I understand what you are saying&hellip;&rdquo; </li>
        <li>Allow ample opportunity for &lsquo;and also&rsquo; issues to be raised at the end of the interview or afterwards. People answering open questions tend to remember facts as they go along.</li>
      </ul>
      <p align="center"><font face="trebuchet ms, arial, helvetica" color="#006666"><img src="images/miscellaneous/dividing_line.gif" width="300" height="10"></font></p>
      <h2>Closed Interviews</h2>
      <p>In using the opposite interview technique, closed interviews, you might ask </p>
      <p>&ldquo;For reporting of sales, I suppose the current breakdown by nation, state and category is OK, isn&rsquo;t it?&rdquo; </p>
      <p>The question presumes and prompts a yes/no answer. It also offers a quick and easy interview, requiring minimum reflection and analysis.</p>
      <p align="center"><font face="trebuchet ms, arial, helvetica" color="#006666"><img src="images/miscellaneous/dividing_line.gif" width="300" height="10"></font> </p>
      <h2>Why Closed Questions</h2>
      <p>As mentioned, closed interviews are useful when you are trying to find out one fact. You know precisely the question to ask and know the possible answers. They are also useful in clarifying facts in an open interview. As people cover topics broadly, you might grab one point and want to understand it more clearly. You want to drill down on a particular aspect. </p>
      <p>For example, you asked a question on how effective current sales reports are. The person is giving you a full briefing on all the reports, and the implications. They mention the sales summary report. You might ask a closed question about who receives the report and why they are provided with a copy.</p>
      <p>Closed questions allow you to drill down on a piece of information. It is more likely that closed questions will be more spontaneous than open questions. As the open question draws out the big picture, you want to closely examine bits of the picture with closed questions.</p>
      <p align="center"><font face="trebuchet ms, arial, helvetica" color="#006666"><img src="images/miscellaneous/dividing_line.gif" width="300" height="10"></font></p>
      <h2>On the Spot</h2>
      <p>Closed questions can put people on the spot. They can almost sound like they were fired by the prosecutor in a trial. </p>
      <p>&ldquo;When did you first know the project was behind schedule?&rdquo;</p>
      <p>&ldquo;How many resources can you give up to the project?&rdquo;</p>
      <p>The result is the same as in a trial. The person becomes defensive. They try to find a way out of any admission or commitment. A better approach is to use an open question that allows people room to manoeuvre or qualify their answer. You can tighten up the response with closed questions based around the answer.</p>
      <p>&ldquo;How did you first come to suspect the project may not be on track?&rdquo;</p>
      <p>&ldquo;If we need people to assist, how would you be able to help?&rdquo;</p>
      <p>In both cases, an open ended question allows the person to answer without feeling threatened or ambushed. You avoid the instinctive &ldquo;flight or fight&rdquo;.</p>
      <p align="center"><font face="trebuchet ms, arial, helvetica" color="#006666"><img src="images/miscellaneous/dividing_line.gif" width="300" height="10"></font></p>
      <h2>Information Gathering</h2>
      <p>An interview is an information gathering exercise. That means that you, as the interviewer, are there to direct and listen. You know your own views. The interviewee does not necessarily need to know those views. While you are talking, you are not listening and the purpose of an interview is to find out information from the interviewee. Your role is to keep the ball rolling down the road.</p>
      <p>There is an old saying that when carrying out an interview, you should &ldquo;speak with your ears&rdquo;. In other words, if you say something it should only be because you want to hear the answer.</p>
      <p align="center"><font face="trebuchet ms, arial, helvetica" color="#006666"><img src="images/miscellaneous/dividing_line.gif" width="300" height="10"></font></p>
      <h2>Making people comfortable</h2>
      <p>A technique used by television interviews is to ask a number of easy questions to relax the person before hitting them with the big one. </p>
      <p>&ldquo;So your name is Jim Brown? Lived here long Jim? Married with 2 kids I hear?&rdquo;</p>
      <p>Then</p>
      <p>&ldquo;So tell us about killing your mother in law with a chain saw.&rdquo;</p>
      <p>Use the relaxing questions to start your interview. If the person is at all apprehensive at the start of an interview, a few questions to loosen them up will help later in the discussion. </p>
      <p>Imaging you are being interviewed and you are feeling a little nervous or unsure about the area under discussion. You might not even know exactly why you are being interviewed. If the person starts by explaining the purpose of the interview then asks a few easily answered questions, you start to relax and will become more likely to assist the person.</p>
      <p align="center"><font face="trebuchet ms, arial, helvetica" color="#006666"><img src="images/miscellaneous/dividing_line.gif" width="300" height="10"></font></p>
      <h2>Follow the dots</h2>
      <p>An agenda is a great tool, in most circumstances. If you are having a regular review meeting and have a range of regular topics to cover, an agenda is a great roadmap. Point 1; point2; point 3.</p>
      <p>If on the other hand it is an open discussion, an agenda may be an impediment. The interviewee may want to talk about point 1 and 7 because he sees them as related. The discussion is roaming around the topic, and it might not fit into neat compartments. </p>
      <p>In this case use the agenda as a checklist. It does not have to be strictly followed. It can be a list of topics you want to have covered by the end of the interview. As the interview draws to a close, go over the agenda and see if any points still need discussion. It takes some skill to treat an agenda as a set of boundaries rather than a roadmap. If you can develop those skills, the results can be excellent.</p>
      <p align="center"><font face="trebuchet ms, arial, helvetica" color="#006666"><img src="images/miscellaneous/dividing_line.gif" width="300" height="10"></font></p>
      <h2>Summarising</h2>
      <p>Sometimes people lose the thread of what they are saying. Their mind is wandering down a path and they forget where they have been or are going. It is useful to sometimes stop and summarise what you think has been said. It is double purposed. Firstly it confirms what has been said, and secondly it re-focuses the person.</p>
      <p align="center"><font face="trebuchet ms, arial, helvetica" color="#006666"><img src="images/miscellaneous/dividing_line.gif" width="300" height="10"></font></p>
      <h2>Active Listening</h2>
      <p>It is a fact that most people want to be listened to. It is important to feel that the person is mentally still with us as we speak. The occasional nod of the head or confirmation of a point helps people feel their comments are valued. Be sure to respond to people or they will stop contributing and want to terminate the interview. Writing things down will assist in convincing people their input is of value.</p>
      <p align="center"><font face="trebuchet ms, arial, helvetica" color="#006666"><img src="images/miscellaneous/dividing_line.gif" width="300" height="10"></font></p>
      <h2>Answer the Question</h2>
      <p>Watch a politician answer a question, and you will often find they don&rsquo;t answer the question. Techniques include:</p>
      <ul>
        <li>&ldquo;That is a good point but before I answer that let me say&hellip;&rdquo; and of course they never get back to the question</li>
        <li>&ldquo;I want to make three points&hellip;&rdquo; none of which are relevant to the question</li>
        <li>&ldquo;Why would you ask me that?&rdquo; In other words, let&rsquo;s argue about whether you should ask the question rather than try and answer it.</li>
      </ul>
      <p>If you cannot get an answer to a question, try to understand why the person is uncomfortable to provide an answer. It may just be that they forgot the original question and went off on a different track. On the other hand they may well have something they don&rsquo;t want to tell you. Sometimes understanding the reason for not answering in fact answers the question.</p>
      <p align="center"><font face="trebuchet ms, arial, helvetica" color="#006666"><img src="images/miscellaneous/dividing_line.gif" width="300" height="10"></font></p>
      <h2>Body Language</h2>
      <p>Very few people can hide body language. You do not have to be an expert to read it as we all do to some extent. The eyes looking around the room for an answer; folded arms in a defensive position; legs crossed towards you for trust and away for mistrust. There are many articles on body language and a bit of research can help you read what is not being said.</p>
      <p align="center"><font face="trebuchet ms, arial, helvetica" color="#006666"><img src="images/miscellaneous/dividing_line.gif" width="300" height="10"></font></p>
      <h2>Independent Interviewer</h2>
      <p>As a consultant I have been amazed some times at what people have told me. Even though it might not be attributed to them in a report, people often say things to an outsider they would never say to their peers.</p>
      <p>I remember one project review where the project manager was scathing in his remarks about the steering committee. He had never expressed his thoughts to them but told me. On investigation I had to agree with his comments and put it in the report. One of the steering committee members came up to me afterwards and asked me why the project manager never expressed his concerns to the committee?</p>
      <p> Sometimes it is useful to use an outside party for interviews as they are usually seen as coming to the situation without a bias. If not independent, they are usually viewed as not coming to support any entrenched point of view. In fact, from a consultant credibility point of view, it does you no good to go into an organisation to reinforce a particular person&rsquo;s case if you do not believe it to be valid. I usually tell people in that situation that I do investigation, not lobbying. </p>
      <p>Several years ago I did a PIR for a company and managed to upset the executive management team by pointing out their lack of support and the failures that followed. Although I had done considerable work for the organisation I was not invited back to do any more work for a couple of years. When I was invited back, I found most of the people I had been critical of had moved on. I was invited back because the person who now wanted work done was impressed with my fairness and impartiality from years before. He had remembered me and now needed the same sort of review done without someone pushing a particular point of view. What goes around comes around.</p>
      <p align="center"><font face="trebuchet ms, arial, helvetica" color="#006666"><img src="images/miscellaneous/dividing_line.gif" width="300" height="10"></font></p>
      <h2>Conclusion</h2>
      <p><font color="#006666" face="trebuchet ms, arial, helvetica"><a href="pa.htm"><img src="images/pa_general/pa_advert.gif" alt="project management software" width="250" height="100" border="0" align="left"></a></font>It is surprising how many people think an interview is just a fireside chat. The dynamics are far more complex. Think about your own interviewing technique and use some of these ideas to improve it. It is particularly important for your career path as you sometimes have to interview senior managers. The interview is often the only real exposure you have for them to form an opinion of you. If a promotion comes up and you have just bungled your way through a poor interview with a senior manager, your chances of getting a promotion are low. On the other hand if you have managed to direct the interview in a manner that impressed the manager, your chances are enhanced.</p>
      <p align="center"><font face="trebuchet ms, arial, helvetica" color="#006666"><img src="images/miscellaneous/dividing_line.gif" width="300" height="10"></font></p>
      <p> 
      <table width="100%" border="1" cellspacing="0" cellpadding="0">
        <tr>
          <td width="70%"><div align="center">
              <p><b>To date,
                    <?php
    $topic="interv";
    $display="total";
    require "/home/projectp/public_html/b3r/b3_rating/b3_rating.php";
    ?>
              people have rated this article. The average rating is
              <?php
    $topic="interv";
    $display="average";
    require "/home/projectp/public_html/b3r/b3_rating/b3_rating.php";
    ?>
              - Add your rating. Just select a rating and click the button. No other information required. </b></p>
              <p><b>Only one rating per person is allowed.</b></p>
          </div></td>
          <td width="30%"><center>
              <p> </p>
            </center>
              <center>
                <?php
    $topic="interv";
    $display="preset1";
    $myimages="no";
    $font="verdana";
    $fontsize="2";
    $category="";
    $autoredirect="yes";
    $myurl="http://yourdomain.com/different.html";
    $checkuser="yes";
    require "/home/projectp/public_html/b3r/b3_rating/b3_rating.php";
    ?>
            </center></td>
        </tr>
      </table>
      <p align="center">
                <a href="#top">Return to the top</a>
          <p align="center">
                <SCRIPT LANGUAGE="JavaScript">
                MM_LastModDate()
                </script> 
      <p align="center"><font face="trebuchet ms, arial, helvetica" color="#006666"><img src="images/miscellaneous/dividing_line.gif" width="300" height="10"></font></p>
    </div>
    <!-- #EndEditable -->
        </div><!-- Align text left -->
    </div><!-- MainText-->
    </div>
    <!-- Wrapper -->
    </body>
    <!-- #EndTemplate --></html>

  • Port Forwarding not working properly.

    Router: WRT54G V.6
    Firmware: 1.00.9
    Basically, my port forwarding does not work. Using this link (https://www.grc.com/x/portprobe=55554), I can test a port to see if it's open or not.
    Whenever I open a port on the router, it displays the port as "CLOSED", while I am aiming for "OPEN". This is a new router, and this problem also was occuring on my old V.2 one. Strangly, when I first tried opening the ports, it worked fine. Next day, it appeared as close, and no other settings were changed.
    Any help out there? If any more information is needed, please tell me.

    Only if grc reports the port "STEALTH" you have no port forwarding. If it is "CLOSED" then the port on the computer you are forwarding to has the port closed. You must check the settings on the computer where you forward to to see whether the port is open or not. Simply setting up a port forwarding does not open a port. It simply forwards everything to the ip address configured in the port forwarding. Thus, if the port is closed there it is closed and not open.

  • Not work tablet UI on Prestigio 5080 PRO tablet

    I read that browser.ui.layout.tablet = "1" can fix this problem. But it not works. I can work only in pnone interface that is not good for my 8'' tablet.

    Would it be possible for you to share the problematic pdf and OS information  with us at [email protected] so that we may investigate?
    Thanks,
    Adobe Reader Team

  • Why self-defined access sequences of free goods can not work?

    Hi gurus,
    I have maintained access sequences of free goods self-defined.but when i creat the SO it does not work!
    when i used the standard access sequences ,it is OK .
    Can anybody tell me why?
    thanks in advance

    Dear Sandy,
    Go to V/N1 transaction select your self defined access sequence then go in to the accesses and fields and check all fields are activated.
    Make sure that these fields are flowing in your sales order.
    I hope this will help you,
    Regards,
    Murali.

  • Adobe bridge raw not working with windows vista in photoshop cc, why?

    adobe bridge raw not working in photoshop cc, is there a fix?

    Your sure your using photoshop cc on windows vista?
    I was under the impression that photoshop cc would not even install on windows vista.
    What version of camera raw do you have?
    In photoshop under Help>About Plugin does it list Camera Raw and if so which version is it?
    (click on the words Camera Raw to see the version)
    Camera raw doesn't work if it's a camera raw file or some other file type such as jpeg or tif?
    What camera are the camera raw files from?
    Officially camera raw 8.3 is the latest version of camera raw that will work on windows vista.

Maybe you are looking for

  • My second internal hard drive disappeared

    My second internal hard drive disappeared a couple of days ago taking many gigs of iTunes with it. It does not appear on the desktop, finder or anywhere else. When I click on a song in iTunes I get "The song "Cowell: Set Of Five - 4" could not be use

  • Bulk fetch taking long time.

    I have created a procedure in which i am fetching data from remote db using database link. I have 1 million data to fetch and the row size is around 200 bytes ( The table is having 10 attribute sizing 20 bytes each ) OPEN cur_noit; FETCH cur_noit BUL

  • Calling a report from a from 10g 1.2

    Hi my friends. how a re you ? please i need ur help here i have installed oracle 10g 1.2 on my machine, the database and the AS in the same computer. i have problem which is i'm trying to call the report attached to the form using a push button on th

  • Hwo to do scenario with multiple queues in jms sender

    Hi users, In my scenario jms to idoc i have requirement from two diffrerent queues  i need to pick the data. if its two sender communication channels then how to create two sender agreements? please help out to me Regards

  • Dreamweaver CS5 not working with CS4 templates?

    I upgraded from CS4 to CS5 of Dreamweaver today and so I opened a template up in CS5 that I made for my site in CS4. So everytime that I make a new page from the CS4 template it will look good in the editing view and I can edit everything I'm suppose