GRC AC 10 - ARM Table with Requests violations

Dear Experts,
Anyone know if there is any GRC AC 10 table containing the summary information if the ARM requests have has violation or not?
Thanks in advance,
Regards,
Vitor Cozer

Hi Victor,
No, there are no such tables which could give the relations between the ARM requests and the corresponding violations.
You have only one option; like Neeraj suggested, run the reports for this need.
Regards,
Ameet

Similar Messages

Transport Table with Data from Development to Quality

Hi
Requirement:
Transporting Table with Values from Development to Quality System.
I have a Z* - table, appended one field at the end.
I need to transport data along with the table structure from Development System to Quality System.
In Development System, I have assigned the Transport request in Client 100(We can't add data to the table in this client).
What needs to be done to migrate the new table structure with Values.
Thanks in Advance
Regards,
Baburaj
NOTE: the requirement is to transport table and table entries through a transport request.
There should not be any manual update for the table in the target System (Quality System).

Check the delivery class assigned to the table. Please see the documentation
Delivery class
    The delivery class controls the transport of table data when installing
    or upgrading, in a client copy and when transporting between customer
    systems. The delivery class is also used in the extended table
    maintenance.
    There are the following delivery classes:
    o   A: Application table (master and transaction data).
    o   C: Customer table, data is maintained by the customer only.
    o   L: Table for storing temporary data.
    o   G: Customer table, SAP may insert new data records, but may not
        overwrite or delete existing data records. The customer namespace
        must be defined in table TRESC. (Use Report RDDKOR54 here).
    o   E: System table with its own namespaces for customer entries. The
customer namespace must be defined in table TRESC. (Use Report
RDDKOR54 here.)
S: System table, data changes have the same status as program
changes.
W: System table (e.g. table of the development environment) whose
data is transported with its own transport objects (e.g. R3TR PROG,
R3TR TABL, etc.).
or during client copy
the data of client-specific tables is copied.
Classes C, G, E, S: The data records of the table are copied to the
target client.
Classes W, L: The data records of the table are not copied to the
target client.
Class A: Data records are only copied to the target client if
explicitly requested (parameter option). Normally it does not make
sense to transport such data, but is supported to permit you to copy
an entire client environment.
or during installation, upgrade and language import
behavior differs here for client-specific and cross-client tables.
nt-specific tables
Classes A and C: Data is only imported into client 000. Existing
data records are overwritten.
Classes E, S and W: Data is imported into all clients. Existing data
records are overwritten.
Class G: Existing data records are overwritten in client 000. In all
other clients, new data records are inserted, but existing data
records are not overwritten.
Class L: No data is imported.
Cross-client tables
o   Classes A, L and C: No data is imported.
o   Classes E, S, and W: Data is imported. Exisitng data records with
     the same key are overwritten.
o   Classe G: Data records that do not exist are inserted, but existing
     data records are not overwritten.
ehavior during transport between customer systems
Data records of tables of delivery class L are not imported into the
target system. Data records of tables of delivery classes A, C, E, G, S
and W are imported into the target system (this is done for the target
client specified in the transport for client-specific tables).
se of the delivery class in the extended table maintenance
The delivery class is also analyzed in the extended table maintenance
(SM30). The maintenance interface generated for a table makes the
following checks:
o   You cannot transport the entered data with the transport link of the
    generated maintenance interface for tables of delivery classes W and
    L.
o   When you enter data, there is a check if this data violates the
    namespace defined for the table in table TRESC. If the data violates
    the namespace, the input is rejected.
Thanks,

Error During Creation of Table Value Request /Simple Value Request Express

Hi,
I am on SAP CRM ABAP 7.0 with enhancement pack 2.0.
The requirement is to create a decision table which would have value(search helps) requests for some of the condition columns in it. For example, Value Request for condition column Y would come according to condition column X . As per my understanding,this could only be achieved by maintaining foreign key relationship. So I tried to create a Table Value Request which I could assign in the domain values in the data object of the corresponding condition column.
But,when I am trying to create a Table Value Request or Simple Value Request in BRF+ application, it is throwing an error message "Table FDT_EXPR_1950S is not part of the Customizing object FDT0001 T".
Could you please help me out !!

Hi Carsten,
Thanks for your quick response.
Just wondering whether or not I can achieve the requirement without Table Value Request. Do you have any idea on this?

No data found error on Form on a Table with report

Hi Everyone, I'm using Application Express 4.1.0.00.32 on Windows 7. I built a Form on a table with report. Earlier I was using rowid as a passing parameter but then I had to change it to primary key column from report to form.
So in the "Fetch row process" I changed the "Items containing primary key value" and "Primary Key column" to P1004_PERSON_ID and PERSON_ID respectively. Which is my primary key.
My Form is working exactly fine but at on point it throws "no data found error".
I have a required date field in the form. So if the user doesn't fill in the date field and try to save the form, it throws the "Feild required error" and then when user enters date and try to save then it throws the error "No data found.". here is the snapshot... snapshot
How can I fix this error.I'm really stuck.
I checked debubber..it is as follows... in debughger it's still showing rowid. I don't know why. How can I fix that.
Execution
Message
Level
Graph
0.00233
0.00932
S H O W: application="101" page="1004" workspace="" request="" session="123235901404364"
4
0.01161
0.00102
Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
4
0.01261
0.00046
alter session set nls_language="AMERICAN"
4
0.01307
0.00042
alter session set nls_territory="AMERICA"
4
0.01348
0.00053
NLS: CSV charset=WE8MSWIN1252
4
0.01401
0.00042
...NLS: Set Decimal separator="."
4
0.01443
0.00053
...NLS: Set NLS Group separator=","
4
0.01495
0.00050
...NLS: Set g_nls_date_format="DD-MON-RR"
4
0.01545
0.00051
...NLS: Set g_nls_timestamp_format="DD-MON-RR HH.MI.SSXFF AM"
4
0.01597
0.00050
...NLS: Set g_nls_timestamp_tz_format="DD-MON-RR HH.MI.SSXFF AM TZR"
4
0.01647
0.00079
...Setting session time_zone to -05:00
4
0.01726
0.00046
Setting NLS_DATE_FORMAT to application date format: DD-MON-YYYY
4
0.01772
0.00060
Setting NLS_TIMESTAMP_FORMAT to application timestamp format: DD-MON-YYYY HH24.MI.SSXFF
4
0.01832
0.00092
...NLS: Set g_nls_date_format="DD-MON-YYYY"
4
0.01924
0.00049
...NLS: Set g_nls_timestamp_format="DD-MON-YYYY HH24.MI.SSXFF"
4
0.01973
0.00083
...NLS: Set g_nls_timestamp_tz_format="DD-MON-RR HH.MI.SSXFF AM TZR"
4
0.02056
0.00099
NLS: Language=en-us
4
0.02154
0.00157
Application 101, Authentication: PLUGIN, Page Template: 5091946581246503
4
0.02312
0.00065
...fetch session state from database
4
0.02377
0.00106
fetch items
4
0.02483
0.00065
...fetched 103 session state items
4
0.02548
0.00194
Authentication check: NTLM (NATIVE_CUSTOM)
4
0.02742
0.00188
...Execute Statement: begin declare begin wwv_flow.g_boolean := f_ntlm_page_sentry_parm; end; end;
4
0.02930
0.00050
... sentry+verification success
4
0.02980
0.00042
...Session ID 123235901404364 can be used
4
0.03021
0.00114
...Application session: 123235901404364, user=VARMAN01
4
0.03135
0.00162
...Check for session expiration:
4
0.03297
0.00075
Session: Fetch session header information
4
0.03372
0.00113
...Setting session time_zone to -5:00
4
0.03485
0.00080
Branch point: Before Header
4
0.03565
0.00598
Fetch application meta data
4
0.04165
0.00081
...metadata, fetch computations
4
0.04245
0.00076
...metadata, fetch buttons
4
0.04321
0.00086
Setting NLS_DATE_FORMAT to application date format: DD-MON-YYYY
4
0.04406
0.00058
Setting NLS_TIMESTAMP_FORMAT to application timestamp format: DD-MON-YYYY HH24.MI.SSXFF
4
0.04464
0.00049

Just an observance... SQL is still showing the rowid instead of the P1004_PERSON_ID ??
where "PERSON_ID" = :p_rowid;
should it not be :
where "PERSON_ID" = :P1004_PERSON_ID:
thx, Bill

Form on Table with Report works in one environment but not in another.

Here's a short description of the problem:
Created a form on a table with report (using the wizard) in an ApEx application. The form and report work perfect in development environment. Once the application is moved to the Test environment, the insert feature of the form does not work. We have verified that the underlying table the form is based on is there with all the fields, primary key, sequence and trigger.
Any ideas?
Marc

Ben,
I assume that apex_public_user has all the approporiate privilegesapex_public_user requires no privileges other than those it is created with during installation and the execute privileges on procedures it may acquire as URL-invokable procedures are developed and registered.
Marc - What are the symptoms of the problem (insert does not work) ? What does the debug output show when you run the page in debug mode? Does the "request" value of the button (create button?) match one of the request values recognized by the DML process?
Scott

Creating a selectable HTML table with Sahrepoint list data dind

Hi All,
I m creating an app for sharepoint2013 , on my app I want to read data from SP list and display on something like HTML table/ grid view.
What I have done is as follows.
<table cellpadding="0" cellspacing="0" border="0" class="display" id="TermList">
                   <thead>
                       <tr>
                                    <th>Start Date</th>
                           <th>End Date</th>
                           <th>Term Type(s)</th>
                           <th>Specialty</th>
                           <th width="12%">Sub Specialty</th>
                       </tr>
                   </thead>
                                        <tbody>
                        </tbody>
</table>
var context = SP.ClientContext.get_current();
var user = context.get_web().get_currentUser();
var Termsitems, web, hostcontext, currentusertitle;
var hosturl;
(function () {
$(document).ready(function () {
    gethostdata();
    getUserName();
    $('#TermList').dataTable(
                    "sScrollY": 200,
                       This will enable jQuery UI theme
                    "bJQueryUI": true,
                       will add the pagination links
                    "sPaginationType": "full_numbers"
    getTermdetails();
function gethostdata() {
    hosturl = decodeURIComponent(getQueryStringParameter("SPHostUrl"));
    context = new SP.ClientContext.get_current();
    hostcontext = new SP.AppContextSite(context, hosturl);
    web = hostcontext.get_web();
    context.load(web, 'Title');
    context.executeQueryAsync(onSiteLoadSuccess, onQueryFailed);
function onSiteLoadSuccess(sender, args) {
    //   alert("site title : " + web.get_title());
function onQueryFailed(sender, args) {
    alert('request failed ' + args.get_message() + '\n' + args.get_stackTrace());
function getQueryStringParameter(urlParameterKey) {
    var params = document.URL.split('?')[1].split('&');
    var strParams = '';
    for (var i = 0; i < params.length; i = i + 1) {
        var singleParam = params[i].split('=');
        if (singleParam[0] == urlParameterKey)
            return decodeURIComponent(singleParam[1]);
// This function prepares, loads, and then executes a SharePoint query to get the current users information
function getUserName() {
    context.load(user);
    context.executeQueryAsync(onGetUserNameSuccess, onGetUserNameFail);
// This function is executed if the above call is successful
// It replaces the contents of the 'message' element with the user name
function onGetUserNameSuccess() {
currentusertitle= user.get_title();
$('#message').text('Hello ' + user.get_title());
// This function is executed if the above call fails
function onGetUserNameFail(sender, args) {
    alert('Failed to get user name. Error:' + args.get_message());
function getTermdetails() {
    var Termlist = web.get_lists().getByTitle("TraineeTermsSPlist");
    context.load(Termlist)
    var camlQuery = new SP.CamlQuery();
    camlQuery.set_viewXml('<View><Query><Where><Eq><FieldRef Name="Title" />' +
                             '<Value Type="Text"> + currentusertitle + </Value></Eq></Where></Query></View>');
    Termsitems = Termlist.getItems(camlQuery);
    context.load(Termsitems);
    context.executeQueryAsync(getTermdetailsQuerySuccsess, getTermdetailsQueryFails)
function getTermdetailsQuerySuccsess(sender, args) {
    var listEnumerator = Termsitems.getEnumerator();
    var datatable = document.getElementById("TermList");
    while (listEnumerator.moveNext()) {
        var oListItem = listEnumerator.get_current();
        var startdate = listEnumerator.get_current().get_item('startdate');
        var enddate = listEnumerator.get_current().get_item('Enddate');
        var termtype = listEnumerator.get_current().get_item('TermType');
        var Specialty = listEnumerator.get_current().get_item('Specialty');
        var Specialty = listEnumerator.get_current().get_item('Subspecialty');
        $("#TermList").append("<tr align='middle' class='gradeA'>" +
                                  "<td align='left'>" + startdate +
"</td>" +
                                  "<td align='left'>" + enddate + "</td>"
+
                                  "<td align='left'>" + termtype + "</td>"
+
                                  "<td align='left'>" + Specialty +
"</td>" +
                                  "<td align='left'>" + Specialty +
"</td>" + "</tr>");
function getTermdetailsQueryFails(sender, args) {
    alert(' Error:' + args.get_message());
Now what I want to do is allow user to select rows on the table. Once they select a row I want to get that selected row and search SP list based on the selected value. Also I would like to make this table with search area to search records.
Can someone please help me to do this, or are there any easy way to do this. Sample code or useful link much appreciate.
Thank you very much.
d.n weerasinghe

Instead of writing in dive each and every time directly,
just have a div in html, and inside the while loop
write and store in the variable like
output += "<li><a href='#' style='display:none'>" + usernames[i] + " </a> "
+ "<table id='results' width='100%'>"
+ "
<tr style='border-bottom:1px silver solid;'>"
+ "
<td style='width:60px;height:70px;' >"
+ "
<img alt=\"profile pic\" src= '" + pictureuri[i] + "' style='width:60px;height:60px;'/>"
+ "
</td>"
+ "
<td >"
+ "
<table style='height:100%'>"
+ "
<tr>"
+ "
<td style='padding-padding-vertical-align:top;height:10px' >"
+ "
<a href='" + personaluri[i] + "' classq='ms-bold ms-subtleLink' style='color: gray; font-size: 12px; font-weight: bold;'>" + tempnames[i] + "</a>"
+ "
</td>"
+ "
</tr>"
+ "
<tr>"
+ "
<td style='padding-vertical-align:top;height:50px;color:#ADAEAD;font-size:14px;' >" + deptNames[i]
+ "
</td>"
+ "
</tr>"
+ "
</table>"
+ "
</td>"
+ "
</tr>"
+ "</table>"
+ "</li>"
and finaly oyutside the loop
$(#div).html(output);

How to create a table with rows within a row?

Hi,
I am trying to create a table that looks like this: https://acrobat.com/#d=XyI3rlSWMWYXQixzpRSrXA but I can't figure it out.
Please can someone tell how I should go about this?
thanks for the help.

Hi,
We you see nested tables, you have to create a table inside a table. For this first you have to merge the rows and insert a table with the number of rows requested. You can find the sample created for you below and let me know in case of any issues
https://sendnow.acrobat.com/m/g.ashx?i=rO1m-dIDzRs2FibTHDSiww&x=yrC*o4IZIVfpKgqOTbX8OQ
Thanks

How to get the number of routes in MLS L3SW table with SNMP

Hello experts,
Is there any way to get the number of routes in the MLS-hardware Layer 3-switching table with SNMP, like with CLI command "show mls cef summary"?
If possible, please let me know the OID and which MIB do I use.
[e.g.]
#show mls cef summary
Total routes: 400000
<omit>
====
Device : C6509E
IOS : s72033-advipservicesk9_wan-mz.122-33.SXH3a.bin
====
Thank you,

function buttonClick()
var table = profileTable;
var lnRow = table.rows.length;
var insertedRow = table.insertRow(parseFloat(lnRow));
var cell1 = insertedRow.insertCell();
cell1.innerHTML ="<tr><td><Input type=\"hidden\" >>>name=\"rowNum\" value="+cnt"+></td></tr>";
document.profileform.submit;
on submit it goes to the second page, but the value i got using >>>System.out.println("row number from text >>>box"+request.getParameter("rowNum")); is null. What is wrong with >>>my coding. Can anyone solve this.HI carry
Check the value of bold data
function buttonClick()
var table = profileTable;
var lnRow = table.rows.length;
var insertedRow = table.insertRow(parseFloat(lnRow));var cnt=inRow
var cell1 = insertedRow.insertCell();
cell1.innerHTML ="<tr><td><Input type=\"hidden\" >>>name=\"rowNum\" value="+cnt+"></td></tr>";
document.profileform.submit;
}try with it

ORA-19007 when coping a table with an xml type in it to a new schema in the

ORA-19007 when coping a table with an xml type in it to a new schema in the same database.
Hi all,
When I copy a table with an xml type in it to a new schema in the same database I get an ora-19009.
The setup is as follows I have a schema a with table TABLE_WITH_XMLTYPE where data is:
CREATE
TABLE TABLE_WITH_XMLTYPE
FOLDER_ID NUMBER (10, 0) NOT NULL,
SEARCH_PROPERTIES XMLTYPE ,
CONSTRAINT TABLE_WITH_XMLTYPE PK PRIMARY KEY (FOLDERID) USING INDEX
XMLTYPE COLUMN SEARCH_PROPERTIES XMLSCHEMA
"http://xxxxxxx.net/FolderProperties.xsd" element "FolderProperties"
VARRAY SEARCH_PROPERTIES."XMLDATA"."PROPERTIES"."PROPERTY" STORE AS TABLE
PROPERTY_TABLE
(PRIMARY KEY (NESTED_TABLE_ID, ARRAY_INDEX)) ORGANIZATION INDEX OVERFLOW
Both schemas have the following xml schema registered as a local xml schema
BEGIN
DBMS_XMLSCHEMA.registerSchema(
SCHEMAURL => 'http://xxxxxxx.net/FolderProperties.xsd',
SCHEMADOC =>
'<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:xdb="http://xmlns.oracle.com/xdb"
xdb:storeVarrayAsTable="true">
<xs:element name="FolderProperties"
type="FolderPropertiesType"
xdb:defaultTable="FOLDER_SEARCH_PROPERTIES" />
<xs:complexType name="FolderPropertiesType" xdb:SQLType="FOLDERPROPERTIES_T">
<xs:sequence>
<xs:element name="FolderID" type="FolderIDType" minOccurs="1" xdb:SQLName="FOLDER_ID"/>
<xs:element name="Properties" type="PropertiesType" xdb:SQLName="PROPERTIES"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="PropertiesType" xdb:SQLType="PROPERTIES_T">
<xs:sequence>
<xs:element name="Property" type="PropertyType" maxOccurs="unbounded"
xdb:SQLName="PROPERTY" xdb:SQLCollType="PROPERTY_V"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="PropertyType" xdb:SQLType="PROPERTY_T">
<xs:sequence>
<xs:element name="DateValue" type="DateType" xdb:SQLName="DATE_VALUE"/>
<xs:element name="NumValue" type="NumType" xdb:SQLName="NUM_VALUE"/>
<xs:element name="StringValue" type="StringType" xdb:SQLName="STRING_VALUE"/>
</xs:sequence>
<xs:attribute name="Name" xdb:SQLName="NAME" xdb:SQLType="VARCHAR2">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="255"/>
</xs:restriction>
</xs:simpleType>
</xs:attribute>
</xs:complexType>
<xs:simpleType name="FolderIDType">
<xs:restriction base="xs:integer"/>
</xs:simpleType>
<xs:simpleType name="DateType">
<xs:restriction base="xs:dateTime"/>
</xs:simpleType>
<xs:simpleType name="NumType">
<xs:restriction base="xs:decimal"/>
</xs:simpleType>
<xs:simpleType name="StringType">
<xs:restriction base="xs:string" />
</xs:simpleType>
</xs:schema>',
LOCAL => TRUE,
GENTYPES => TRUE,
GENTABLES => FALSE);
END;
when I try to do the following insert:
insert into schemaB.TABLE_WITH_XMLTYPE ( FOLDER_ID, SEARCH_PROPERTIES)
select FOLDER_ID, SEARCH_PROPERTIES from schemaB.TABLE_WITH_XMLTYPE;
I’ll get an ora-19007.
Can some one point me in the right direction how to solve this error.
Thanks Roelof.

Who did you create the second table, in other words, how did you COPY the table as you said...
If you created the second table via a CTAS (create table as select) then you will have created a table that is not the same as the original one. AFAIK I have once created an enhancement request for this after discovering that JDeveloper, for example, creates a "copy" via a CTAS which creates the wrong structure. Double check via package DBMS_METADATA.
SQL> set long 1000000
SQL> select DBMS_METADATA('TABLE','TABLE_WITH_XMLTYPE','SchemaA') from dual;
SQL> select DBMS_METADATA('TABLE','TABLE_WITH_XMLTYPE','SchemaB') from dual;If you have got two different tables, than Mark's solution should help.
M.
Edited by: Marco Gralike on Feb 15, 2009 11:16 AM

At the creation of MCD we got the problem with Request

Hi All,
we are all very new to SAP MI,
At the creation of CD we got the problem with Request
<i><b>Creation of CD</b></i>
we gave these entries
<b>1.Mobile Solution Name        :      CIBERNW
Version                                    :      1001
Description                              :      Ciber Netweaver Mobile
Cmponent Type                       :        APPLICATION
Runtime Enviroment                 :      JSP</b>
In SyncBO tab we specified our SyncBO that is <b>ZNWW_EX01</b>
we selected the check two checkboxs that is
                   <b>->SyncBOs Expect Initial Value
                   ->Data Visible to all</b>
2.when i am trying to <b>save the MCD</b> it will open one dialog box that is
<b>"Object can only created in SAP Package "</b> -> Continue
       <b>"Link to Transport "</b> it says
<b>"Include MCD in Transport Request", "Yes","No"</b>
when i will go for <b>"Yes"</b>
it will give one more dialog box that is
<b>"prompt of workbeanch Request"</b>
it will give one Request bydefault that is <b>"CNWK900030"</b>
there we have some option that is
     <b> ->Continue
      ->Create Request
      ->Own Request</b>
which one we will select ?
i will go for <b>Continue</b> it will open other dialog box it says
<b>"Include MiniApp in Transport Request"</b>
it says <b>"MiniApp must be assigned to a transport request"</b>
i will go for continue it will the message in the status bar
<b>"MCD Changed"</b>
can you please tell me this process is Right or wrong
if it is wrong can you please tell me the right process
and it will some default Requests which Request we need to select
or we need to create the Request where we need to create that
what is process we need to follow ?
Thanks and Regards
Dileep Painnamaneni

Hi Dileep,
<<Creation of MCD >>
<<we gave these entries >>
<b><<1.Mobile Solution Name : CIBERNW
Version : 1001
Description : Ciber Netweaver Mobile
Cmponent Type : APPLICATION
Runtime Enviroment : JSP>>
In SyncBO tab we specified our SyncBO that is ZNWW_EX01
we selected the check two checkboxs that is
->SyncBOs Expect Initial Value
->Data Visible to all</b>
Every thing is fine. We need to check Link to <b>SAP MI Home page</b> check box
<b>2.when i am trying to save the MCD it will open one dialog box that is
"Object can only created in SAP Package " -> Continue
"Link to Transport " it says
"Include MCD in Transport Request", "Yes","No"
when i will go for "Yes"
it will give one more dialog box that is
"prompt of workbeanch Request"
it will give one Request bydefault that is "CNWK900030"
there we have some option that is
->Continue
->Create Request
->Own Request
which one we will select ?
i will go for Continue it will open other dialog box it says
"Include MiniApp in Transport Request"
it says "MiniApp must be assigned to a transport request"
i will go for continue it will the message in the status bar
"MCD Changed"</b>
In SAP when ever we create any object(tables or MCDs) :
there are two things CUSTOMER NAME SPACE(stored locally in that system only) and FORIEGN NAME SPACE(can be transported)
CUSTOMER NAME SPACE objects starts with 'Z' or 'Y'
FORIEGN NAME SPACE objects starts with any other digit other than 'Z' or 'Y'
So youhave created MCD name CIBERNW which starts with 'C' (its not customer name space with z or y)
so it will be stored in package(so that this package can be transported to any other system later)
So what ever you have done is correct.
You can create your own request also.
But confirm once that whether you are supposed to store your MCD this that package.
<b>
can you please tell me this process is Right or wrong
if it is wrong can you please tell me the right process
and it will some default Requests which Request we need to select
or we need to create the Request where we need to create that
what is process we need to follow ?</b>
So this is the concept of request.
So this request is nothing but....
When ever we create tables or MCDs we try to save it..so if we are trying to create objects in Foreign name space(i.e without 'Z' or 'Y' inthe beginning) so it will ask to create this object in a package which requires request(transport request)
All objects are stored in package,( so this package contains many objects like MCD,SYNBOS etc what ever we store in it) so we can transport this package from one system to another system so to transport we need to generate a transport request for that package and them release that transport request.....
So once the package is released and we try to edit or create new objects in that package it will ask for some new request.....
Yes we can create our own request and later release it.
But in your case u can take up the default request and continue.
If this MCD is for only testing purpose(for our selfs)..means this MCD is just for our testing sake..its better to create it in Customer name space..starts with 'Z' or 'Y'.
I hope its clear.
Cheers,
Karthick

Excel data transfer into SAP internal table with GUI_UPLOAD

hi all,
i m using SRM4 system and i wanted to develop one report which will upload data from excel and convert it into IT.
i know that many threads are posted on this topic.
but my requirement is slight different. in the system only one function module is available that is "GUI_UPLOAD" and we want that user shd not save file as tab delimited before calling this fm. instead, program shd take care of all these things...
please suggest something asap..
helpful ans will be rewarded..
thanks,
jigs.

Dear Jigs,
Please go though the following lines of code:
D A T A D E C L A R A T I O N *
TABLES: ANEP,
BKPF.
TYPES: BEGIN OF TY_TABDATA,
MANDT LIKE SY-MANDT, " Client
ZSLNUM LIKE ZSHIFTDEPN-ZSLNUM, " Serial Number
ZASSET LIKE ZSHIFTDEPN-ZASSET, " Original asset that was transferred
ZYEAR LIKE ZSHIFTDEPN-ZYEAR, " Fiscal Year
ZPERIOD LIKE ZSHIFTDEPN-ZPERIOD, " Fiscal Period
ZSHIFT1 LIKE ZSHIFTDEPN-ZSHIFT1, " Shift No. 1
ZSHIFT2 LIKE ZSHIFTDEPN-ZSHIFT1, " Shift No. 2
ZSHIFT3 LIKE ZSHIFTDEPN-ZSHIFT1, " Shift No. 3
END OF TY_TABDATA.
Declaration of the Internal Table with Header Line comprising of the uploaded data.
DATA: BEGIN OF IT_FILE_UPLOAD OCCURS 0.
INCLUDE STRUCTURE ALSMEX_TABLINE. " Rows for Table with Excel Data
DATA: END OF IT_FILE_UPLOAD.
S E L E C T I O N - S C R E E N *
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME,
BEGIN OF BLOCK B2 WITH FRAME.
PARAMETERS: P_FNAME LIKE RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK B2,
END OF BLOCK B1.
E V E N T : AT S E L E C T I O N - S C R E E N *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FNAME.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
STATIC = 'X'
MASK = '.'
CHANGING
FILE_NAME = P_FNAME
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
E V E N T : S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Upload Excel file into Internal Table.
PERFORM UPLOAD_EXCEL_FILE.
Organize the uploaded data into another Internal Table.
PERFORM ORGANIZE_UPLOADED_DATA.
E V E N T : E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
*& Form UPLOAD_EXCEL_FILE
text
--> p1 text
<-- p2 text
FORM UPLOAD_EXCEL_FILE .
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = P_FNAME
I_BEGIN_COL = 1
I_BEGIN_ROW = 3
I_END_COL = 7
I_END_ROW = 32000
TABLES
INTERN = IT_FILE_UPLOAD
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " UPLOAD_EXCEL_FILE
*& Form ORGANIZE_UPLOADED_DATA
text
--> p1 text
<-- p2 text
FORM ORGANIZE_UPLOADED_DATA .
SORT IT_FILE_UPLOAD BY ROW
COL.
LOOP AT IT_FILE_UPLOAD.
CASE IT_FILE_UPLOAD-COL.
WHEN 1.
WA_TABDATA-ZSLNUM = IT_FILE_UPLOAD-VALUE.
WHEN 2.
WA_TABDATA-ZASSET = IT_FILE_UPLOAD-VALUE.
WHEN 3.
WA_TABDATA-ZYEAR = IT_FILE_UPLOAD-VALUE.
WHEN 4.
WA_TABDATA-ZPERIOD = IT_FILE_UPLOAD-VALUE.
WHEN 5.
WA_TABDATA-ZSHIFT1 = IT_FILE_UPLOAD-VALUE.
WHEN 6.
WA_TABDATA-ZSHIFT2 = IT_FILE_UPLOAD-VALUE.
WHEN 7.
WA_TABDATA-ZSHIFT3 = IT_FILE_UPLOAD-VALUE.
ENDCASE.
AT END OF ROW.
WA_TABDATA-MANDT = SY-MANDT.
APPEND WA_TABDATA TO IT_TABDATA.
CLEAR: WA_TABDATA.
ENDAT.
ENDLOOP.
ENDFORM. " ORGANIZE_UPLOADED_DATA
In the subroutine --> ORGANIZE_UPLOADED_DATA, data are organized as per the structure declared above.
Regards,
Abir
Don't forget to award points *

ORA-07445 in the alert log when inserting into table with XMLType column

I'm trying to insert an xml-document into a table with a schema-based XMLType column. When I try to insert a row (using plsql-developer) - oracle is busy for a few seconds and then the connection to oracle is lost.
Below you''ll find the following to recreate the problem:
a) contents from the alert log
b) create script for the table
c) the before-insert trigger
d) the xml-schema
e) code for registering the schema
f) the test program
g) platform information
Alert Log:
Fri Aug 17 00:44:11 2007
Errors in file /oracle/app/oracle/product/10.2.0/db_1/admin/dntspilot2/udump/dntspilot2_ora_13807.trc:
ORA-07445: exception encountered: core dump [SIGSEGV] [Address not mapped to object] [475177] [] [] []
Create script for the table:
CREATE TABLE "DNTSB"."SIGNATURETABLE"
(     "XML_DOCUMENT" "SYS"."XMLTYPE" ,
"TS" TIMESTAMP (6) WITH TIME ZONE NOT NULL ENABLE
) XMLTYPE COLUMN "XML_DOCUMENT" XMLSCHEMA "http://www.sporfori.fo/schemas/www.w3.org/TR/xmldsig-core/xmldsig-core-schema.xsd" ELEMENT "Object"
ROWDEPENDENCIES ;
Before-insert trigger:
create or replace trigger BIS_SIGNATURETABLE
before insert on signaturetable
for each row
declare
-- local variables here
l_sigtab_rec signaturetable%rowtype;
begin
if (:new.xml_document is not null) then
:new.xml_document.schemavalidate();
end if;
l_sigtab_rec.xml_document := :new.xml_document;
end BIS_SIGNATURETABLE2;
XML-Schema (xmldsig-core-schema.xsd):
=====================================================================================
<?xml version="1.0" encoding="utf-8"?>

<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:ds="http://www.w3.org/2000/09/xmldsig#" xmlns:xdb="http://xmlns.oracle.com/xdb"
targetNamespace="http://www.w3.org/2000/09/xmldsig#" version="0.1" elementFormDefault="qualified">

<xs:simpleType name="CryptoBinary">
<xs:restriction base="xs:base64Binary">
</xs:restriction>
</xs:simpleType>

<xs:element name="Signature" type="ds:SignatureType"/>
<xs:complexType name="SignatureType">
<xs:sequence>
<xs:element ref="ds:SignedInfo"/>
<xs:element ref="ds:SignatureValue"/>
<xs:element ref="ds:KeyInfo" minOccurs="0"/>
<xs:element ref="ds:Object" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:complexType>
<xs:element name="SignatureValue" type="ds:SignatureValueType"/>
<xs:complexType name="SignatureValueType">
<xs:simpleContent>
<xs:extension base="xs:base64Binary">
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:extension>
</xs:simpleContent>
</xs:complexType>

<xs:element name="SignedInfo" type="ds:SignedInfoType"/>
<xs:complexType name="SignedInfoType">
<xs:sequence>
<xs:element ref="ds:CanonicalizationMethod"/>
<xs:element ref="ds:SignatureMethod"/>
<xs:element ref="ds:Reference" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:complexType>
<xs:element name="CanonicalizationMethod" type="ds:CanonicalizationMethodType"/>
<xs:complexType name="CanonicalizationMethodType" mixed="true">
<xs:sequence>
<xs:any namespace="##any" minOccurs="0" maxOccurs="unbounded"/>

</xs:sequence>
<xs:attribute name="Algorithm" type="xs:anyURI" use="required"/>
</xs:complexType>
<xs:element name="SignatureMethod" type="ds:SignatureMethodType"/>
<xs:complexType name="SignatureMethodType" mixed="true">
<xs:sequence>
<xs:element name="HMACOutputLength" minOccurs="0" type="ds:HMACOutputLengthType"/>
<xs:any namespace="##other" minOccurs="0" maxOccurs="unbounded"/>

</xs:sequence>
<xs:attribute name="Algorithm" type="xs:anyURI" use="required"/>
</xs:complexType>

<xs:element name="Reference" type="ds:ReferenceType"/>
<xs:complexType name="ReferenceType">
<xs:sequence>
<xs:element ref="ds:Transforms" minOccurs="0"/>
<xs:element ref="ds:DigestMethod"/>
<xs:element ref="ds:DigestValue"/>
</xs:sequence>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
<xs:attribute name="URI" type="xs:anyURI" use="optional"/>
<xs:attribute name="Type" type="xs:anyURI" use="optional"/>
</xs:complexType>
<xs:element name="Transforms" type="ds:TransformsType"/>
<xs:complexType name="TransformsType">
<xs:sequence>
<xs:element ref="ds:Transform" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:element name="Transform" type="ds:TransformType"/>
<xs:complexType name="TransformType" mixed="true">
<xs:choice minOccurs="0" maxOccurs="unbounded">
<xs:any namespace="##other" processContents="lax"/>

<xs:element name="XPath" type="xs:string"/>
</xs:choice>
<xs:attribute name="Algorithm" type="xs:anyURI" use="required"/>
</xs:complexType>

<xs:element name="DigestMethod" type="ds:DigestMethodType"/>
<xs:complexType name="DigestMethodType" mixed="true">
<xs:sequence>
<xs:any namespace="##other" processContents="lax" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="Algorithm" type="xs:anyURI" use="required"/>
</xs:complexType>
<xs:element name="DigestValue" type="ds:DigestValueType"/>
<xs:simpleType name="DigestValueType">
<xs:restriction base="xs:base64Binary"/>
</xs:simpleType>


<xs:element name="KeyInfo" type="ds:KeyInfoType"/>
<xs:complexType name="KeyInfoType" mixed="true">
<xs:choice maxOccurs="unbounded">
<xs:element ref="ds:KeyName"/>
<xs:element ref="ds:KeyValue"/>
<xs:element ref="ds:RetrievalMethod"/>
<xs:element ref="ds:X509Data"/>
<xs:element ref="ds:PGPData"/>
<xs:element ref="ds:SPKIData"/>
<xs:element ref="ds:MgmtData"/>
<xs:any processContents="lax" namespace="##other"/>

</xs:choice>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:complexType>
<xs:element name="KeyName" type="xs:string"/>
<xs:element name="MgmtData" type="xs:string"/>
<xs:element name="KeyValue" type="ds:KeyValueType"/>
<xs:complexType name="KeyValueType" mixed="true">
<xs:choice>
<xs:element ref="ds:DSAKeyValue"/>
<xs:element ref="ds:RSAKeyValue"/>
<xs:any namespace="##other" processContents="lax"/>
</xs:choice>
</xs:complexType>
<xs:element name="RetrievalMethod" type="ds:RetrievalMethodType"/>
<xs:complexType name="RetrievalMethodType">
<xs:sequence>
<xs:element ref="ds:Transforms" minOccurs="0"/>
</xs:sequence>
<xs:attribute name="URI" type="xs:anyURI"/>
<xs:attribute name="Type" type="xs:anyURI" use="optional"/>
</xs:complexType>

<xs:element name="X509Data" type="ds:X509DataType"/>
<xs:complexType name="X509DataType">
<xs:sequence maxOccurs="unbounded">
<xs:choice>
<xs:element name="X509IssuerSerial" type="ds:X509IssuerSerialType"/>
<xs:element name="X509SKI" type="xs:base64Binary"/>
<xs:element name="X509SubjectName" type="xs:string"/>
<xs:element name="X509Certificate" type="xs:base64Binary"/>
<xs:element name="X509CRL" type="xs:base64Binary"/>
<xs:any namespace="##other" processContents="lax"/>
</xs:choice>
</xs:sequence>
</xs:complexType>
<xs:complexType name="X509IssuerSerialType">
<xs:sequence>
<xs:element name="X509IssuerName" type="xs:string"/>
<xs:element name="X509SerialNumber" type="xs:integer"/>
</xs:sequence>
</xs:complexType>


<xs:element name="PGPData" type="ds:PGPDataType"/>
<xs:complexType name="PGPDataType">
<xs:choice>
<xs:sequence>
<xs:element name="PGPKeyID" type="xs:base64Binary"/>
<xs:element name="PGPKeyPacket" type="xs:base64Binary" minOccurs="0"/>
<xs:any namespace="##other" processContents="lax" minOccurs="0"
maxOccurs="unbounded"/>
</xs:sequence>
<xs:sequence>
<xs:element name="PGPKeyPacket" type="xs:base64Binary"/>
<xs:any namespace="##other" processContents="lax" minOccurs="0"
maxOccurs="unbounded"/>
</xs:sequence>
</xs:choice>
</xs:complexType>


<xs:element name="SPKIData" type="ds:SPKIDataType"/>
<xs:complexType name="SPKIDataType">
<xs:sequence maxOccurs="unbounded">
<xs:element name="SPKISexp" type="xs:base64Binary"/>
<xs:any namespace="##other" processContents="lax" minOccurs="0"/>
</xs:sequence>
</xs:complexType>



<xs:element name="Object" type="ds:ObjectType"/>
<xs:complexType name="ObjectType" mixed="true">
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:any namespace="##any" processContents="lax"/>
</xs:sequence>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
<xs:attribute name="MimeType" type="xs:string" use="optional"/> 
<xs:attribute name="Encoding" type="xs:anyURI" use="optional"/>
</xs:complexType>
<xs:element name="Manifest" type="ds:ManifestType"/>
<xs:complexType name="ManifestType">
<xs:sequence>
<xs:element ref="ds:Reference" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:complexType>
<xs:element name="SignatureProperties" type="ds:SignaturePropertiesType"/>
<xs:complexType name="SignaturePropertiesType">
<xs:sequence>
<xs:element ref="ds:SignatureProperty" maxOccurs="unbounded"/>
</xs:sequence>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:complexType>
<xs:element name="SignatureProperty" type="ds:SignaturePropertyType"/>
<xs:complexType name="SignaturePropertyType" mixed="true">
<xs:choice maxOccurs="unbounded">
<xs:any namespace="##other" processContents="lax"/>

</xs:choice>
<xs:attribute name="Target" type="xs:anyURI" use="required"/>
<xs:attribute name="Id" type="xs:ID" use="optional"/>
</xs:complexType>


<xs:simpleType name="HMACOutputLengthType">
<xs:restriction base="xs:integer"/>
</xs:simpleType>

<xs:element name="DSAKeyValue" type="ds:DSAKeyValueType"/>
<xs:complexType name="DSAKeyValueType">
<xs:sequence>
<xs:sequence minOccurs="0">
<xs:element name="P" type="ds:CryptoBinary"/>
<xs:element name="Q" type="ds:CryptoBinary"/>
</xs:sequence>
<xs:element name="G" type="ds:CryptoBinary" minOccurs="0"/>
<xs:element name="Y" type="ds:CryptoBinary"/>
<xs:element name="J" type="ds:CryptoBinary" minOccurs="0"/>
<xs:sequence minOccurs="0">
<xs:element name="Seed" type="ds:CryptoBinary"/>
<xs:element name="PgenCounter" type="ds:CryptoBinary"/>
</xs:sequence>
</xs:sequence>
</xs:complexType>
<xs:element name="RSAKeyValue" type="ds:RSAKeyValueType"/>
<xs:complexType name="RSAKeyValueType">
<xs:sequence>
<xs:element name="Modulus" type="ds:CryptoBinary"/>
<xs:element name="Exponent" type="ds:CryptoBinary"/>
</xs:sequence>
</xs:complexType>


</xs:schema>
===============================================================================
Code for registering the xml-schema
begin
dbms_xmlschema.deleteSchema('http://xmlns.oracle.com/xdb/schemas/DNTSB/www.sporfori.fo/schemas/www.w3.org/TR/xmldsig-core/xmldsig-core-schema.xsd',
dbms_xmlschema.DELETE_CASCADE_FORCE);
end;
begin
DBMS_XMLSCHEMA.REGISTERURI(
schemaurl => 'http://www.sporfori.fo/schemas/www.w3.org/TR/xmldsig-core/xmldsig-core-schema.xsd',
schemadocuri => 'http://www.sporfori.fo/schemas/www.w3.org/TR/xmldsig-core/xmldsig-core-schema.xsd',
local => TRUE,
gentypes => TRUE,
genbean => FALSE,
gentables => TRUE,
force => FALSE,
owner => 'DNTSB',
options => 0);
end;
Test program
-- Created on 17-07-2006 by EEJ
declare
XML_TEXT3 CLOB := '<Object xmlns="http://www.w3.org/2000/09/xmldsig#">
                              <SignatureProperties>
                                   <SignatureProperty Target="">
                                        <Timestamp xmlns="http://www.sporfori.fo/schemas/dnts/general/2006/11/14">2007-05-10T12:00:00-05:00</Timestamp>
                                   </SignatureProperty>
                              </SignatureProperties>
                         </Object>';
xmldoc xmltype;
begin
xmldoc := xmltype(xml_text3);
insert into signaturetable
(xml_document, ts)
values
(xmldoc, current_timestamp);
end;
Platform information
Operating system:
-bash-3.00$ uname -a
SunOS dntsdb 5.10 Generic_125101-09 i86pc i386 i86pc
SQLPlus:
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Aug 17 00:15:13 2007
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning and Data Mining options
Kind Regards,
Eyðun

You should report this in a service request on http://metalink.oracle.com.
It is a shame that you put all the effort here to describe your problem, but on the other hand you can now also copy & paste the question to Oracle Support.
Because you are using 10.2.0.3; I am guessing that you have a valid service contract...

Joining two fact tables with different dimensions into single logical table

Hi Gurus,
I try to accomplish in Oracle Business Intelligence 11.1.1.3.0:
F1 (D1, D2 and D3)
F2 (D1 and D2 and D4)
And we want to build a report F1 F2 D1 D2 D3 D4 to have data for:
F1 that match only for D1-D2-D3
and data for
F2 that match only D1-D2-D4
all that in one row, so D3 and D4 are not common dimensions.
I can only do:
F3 (D1, D2)
F4 (D1, D2 and D4)
And report
F3 F4 D1,D2,D4 (all that in one row, and only D4 is not a common dimension)
Here is the very good example how to accomplish the scenario 1
http://108obiee.blogspot.com/2009/08/joining-two-fact-tables-with-different.html
But looks like it does not work in 11.1.1.3.0
I get
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 14025] No fact table exists at the requested level of detail: [,,Clients,,Day,ROI,,,,EW_Names,,,,,,,,,,,,,,,,,]. (HY000)
I am sure I set up everything correctly as advised in the blog but it works with only one not a common dimension
Is it a bug in 11.1.1.3.0 or something?
Thanks,
Kate

Thanks for all your replies.
Actually, I've tried the solutions you guys mentioned. Generally speaking, the result should be displayed. However, my scenario is a little bit tricky.
table Y's figures are not the aggregation of table X for D dimension. Instead, table Y's figures include not only D dimension total, but also others (others do not mean A, B, C dimension). For example, table Y stores all food's figure, while table X stores only drink's figure. D dimension is only about drink's detail. In my scenario, other foods' figure is not provided.
So, even if I set D dimension to all/total for table X, table X's result is still not the same as table Y.
Indeed, table Y does not have a column key to join to D dimension's key. So, if I select D dimension and table Y's measures at the same time in BI Answer, result returns no data. Hence, I can't compare table X and table Y's results with selection of D dimension.
Is there any solution to solve this problem?
Edited by: TomChan on Jun 3, 2009 9:36 AM

OBIEE10g: extending a fact table with a custom fact

Hello everyone!
I have the following problem: I created a table with, let's say only two fields: primary key COMMISSION_LINE_ID and a measure called PAID.
After joining my new table with the existing fact table on COMMISSION_LINE_ID both in the physical and logical layer, I tried to set my measure PAID with an aggregation level of SUM. If instead I do not set an aggregation level, everything works fine.
My goal is to aggregate it but the query always crashes with a message like the following:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression:
Please fix the metadata consistency warnings. (HY000)
What can I do?
Thanks in advance for your suggestions!
Edited by: 911078 on 17-gen-2013 3.52

Delete the join in BMM layer and column mappings, just follow as I said earlier.
I would treat the new table as fact extension. Unlike dimension extensions(these go with LTS) fact tables need to map physically.
Just in case if you want to go with your own way as you've done-> You need to add all those dimension keys in new fact(ie F2) treat as 2nd LTS, this would result more or less as you do for aggregate tables.
Hope this helps, pls mark if it does

Problem creating a table with a subquery and a dblink

Hello!!
I have a little problem. When I create a table with a subquery and a dblink, for example:
CREATE TABLE EXAMPLE2 AS SELECT * FROM EXAMPLE1@DBLINK
the table definition is changed. Fields with a type of CHAR or VARCHAR2 are created with a size three times bigger than the original table in the remote database. Field of type DATE and NUMBER are not changed. For example if the original table, in the database 1, has a field of type CHAR(1) it is create in the local database with a type of CHAR(3), and a VARCHAR2(5) field is created with VARCHAR2(15).
Database 1 has a WE8DEC character set.
Database 2 has a AL32UTF8 character set.
Could it be related to the difference in character sets?
What can I do to make Oracle use the same table definition when creating a table in this way?
Thanks!!

That is related to character sets, and probably necessary if you want all the data in the remote table to be able to fit in the new table.
When you declare a column VARCHAR2(5), by default, you're allocating 5 bytes of storage. In a single-byte character set, which I believe WE8DEC is, that also happens to equate to 5 characters. In a multi-byte character set like AL32UTF8, though, 1 character may require up to 3 bytes of storage, so you'd need to allocate 15 bytes to store that data. That's what's going on here.
You could still store all the data if you create the table locally by explicitly requesting 5 characters of storage by declaring the column VARCHAR2(5 CHAR). You could also set the NLS_LENGTH_SEMANTICS parameter to CHAR rather than BYTE before creating the table, but I believe that both of these will only apply when you're explicitly defining columns as part of your CREATE TABLE. I don't believe either will apply to CTAS statements.
Justin

GRC AC 10 - ARM Table with Requests violations

Similar Messages

Maybe you are looking for