GRC AC 10 - batch risk analysis does not bring results

Hi all,
          When I perform a batch RA the job ends quickly and bring no results. It takes like a sec per user.
I am running it from rules that became from a Logical group. When I upload the rules to a physical system it brings results.
What can I do??

Hi Kailash,
Does this issue occur with other dashboard reports too or only with risk violations?
Also, can you check if the batch risk analysis has been successfully completed?
Thanks
Sammukh

Similar Messages

  • GRC AC 10- ARA Risk violation does not show any thing

    Hi Expert,
    GRC AC 10.0 SP14
    Steps to reproduce error
    Reports and Analytic -> Risk violations. The dialog opens up but does not show any thing. Please see the attachment for your information
    We have installed Abode flash player already.
    Any suggestion will be of great help.
    Thanks,
    Kailsh

    Hi Kailash,
    Does this issue occur with other dashboard reports too or only with risk violations?
    Also, can you check if the batch risk analysis has been successfully completed?
    Thanks
    Sammukh

  • GRAC Batch Risk Analysis will not include user

    I noticed a user was not available in AC Production system when I tried to do risk analysis on him.  I ran the Batch Risk Analysis job just to get his inforamtion from our ECC Production system into our AC production system.  It will not bring his information into the system.  I also tried extracting by User Group.  The other people in the user group get brought into the AC system but not this person.  He is not locked or expired.  I am wondering if anyone else has run into this problem.  I am concerned I may have more users who are not being reported against risk violation.
    He has risk, I still have Virsa 4.0 in ECC system and he has 4 high risk violations and 22 medium violations so he should show up in AC system.
    Thank you,
    Mary

    check this note : SAP note 1994429

  • Batch risk analysis job while database is down

    Hello,
    Can I run RAR batch risk analysis job while MaxDB database is down in GRC AC 5.3. Our AS Java database is MaxDB.
    Please note that when the MaxDB database crashed, while the batch risk analysis job was running and then it completed successfully, while the database was still down.
    My query is that does batch risk analysis job, not require AS JAVA database to be up & running?
    Thanks

    Hi Alpesh/ Frank,
    I did check the Background Job Spool file location and Alert Log file location configured in RAR - Misc, I found those directories to be empty.
    Actuallay the configuration has been set to Java Logger.
    Then I checked the background job log from RAR and found out the following information, seen below. (The log file is very long, I have given few lines of it below).
    INFO: Case4: UPDATE VIRSA_CC_SCHEDULER query got executed
    Apr 21, 2010 2:59:40 PM com.virsa.cc.common.util.ConfigUtil setDefaultJ2EEParam
    WARNING: absWebResourceURL:http://ip_address:50000/
    Apr 21, 2010 2:59:40 PM com.virsa.cc.xsys.bg.AnalysisDaemonThread run
    FINEST: Analysis Daemon Thread: Invoking (HTTP): http://ip_address:50000/webdynpro/dispatcher/sap.com/grc~ccappcomp/BgJobStart?daemonId=
    [9024350]E:\usr\sap\CME\JC00\j2ee\cluster\server0\.&threadId=0&daemonType=BG
    INFO: -
    Scheduling Job =>20----
    Apr 21, 2010 2:59:51 PM com.virsa.cc.common.util.ExceptionUtil logError
    SEVERE: null
    java.lang.NullPointerException
         at com.virsa.cc.comp.wdp.IPublicBackendAccessInterface$IUserListInputElement.wdGetObject(IPublicBackendAccessInterface.java)
         at com.sap.tc.webdynpro.progmodel.context.NodeElement.getAttributeAsText(NodeElement.java:888)
    Apr 21, 2010 5:17:08 PM com.virsa.cc.common.util.ExceptionUtil logError
    SEVERE: null
    java.lang.NullPointerException
         at com.virsa.cc.comp.wdp.IPublicBackendAccessInterface$IAuthForUserInputElement.wdGetObject(IPublicBackendAccessInterface.java)
    Apr 21, 2010 5:17:08 PM com.virsa.cc.xsys.meng.ObjAuthMatcher <init>
    FINEST: ObjAuthMatcher constructed: 0ms, #singles=14, #ranges=0, #super=0
    END----
    The last line ends with FINEST: ObjAuthMatcher constructed: 0ms, #singles=14, #ranges=0, #super=0.
    When I checked the status of the Background job, the Batch risk analysis job broken into multiple jobs using User ID Ranges was completed.
    1- My query is from the above log file, is there anything wrong?
    2- If there is something wrong, then why is the status of Background job shown as completed (at a time when MaxDB database was down due to memory issues)?
    Thanks,
    Haleem

  • GRC10 Exclude Objects (Roles) - Batch Risk Analysis Job

    All -
    We are setting up some non-production GRC 10.1 systems at this time and are trying to exclude project roles from our dashboards via the "Maintain Exclude Objects for Batch Risk Analysis" table [SPRO --> GRC --> AC --> ARA --> Batch Risk Analysis].
    The problem that we are encountering is that this Batch Risk Analysis is taking an extremely long time to run on our Project Users even though we have excluded the project roles that these users are assigned.
    For example, User A has 3 project roles which hit a very large number of SoD violations in our rule set, however in the exclusion list we have defined the three roles the user is assigned to be in the exclusion table for All systems and for the specific system that the job is running against. With no luck. The job still takes an average of 30 minutes to run on each user even though the roles they are assigned are excluded.
    We have tested that the exclusion table works because we can exclude the users by adding them to this table and we can also exclude the groups that they are in and this also works. However we have instances where there are other users in this groups that have other roles in addition to these excluded roles that need to be checked.
    Does anyone have any recommendations for how to excluded roles so that the job quickly checks the users with these roles? It is my understanding that if the roles are in the exclusion list they should be skipped by the Batch Risk Analysis job which is running to check these users for the dashboards.
    Thanks,
    Darnell

    Hi,
    Was a solution found for this error?
    Thanks,
    Glen

  • Parallel processing of GRC AC 5.3 SP13 Batch Risk Analysis

    Hello,
    i have a question regarding the parallel processing of Batch Risk Analysis background jobs.
    We have just implemented GRC AC 5.3 SP13 in one of our test-systems. The test-system currently has 6 Server-Nodes.
    When running the initial Full Sync. Batch Risk Analysis the background job only gets executed by one of the Background Job Worker-Threads in one of the Server-Nodes. All the other ID0 Background Job Worker-Threads in the remaining Server-nodes remain idle.
    Is there any special configuration in RAR needed in order to enable the parallel processing or is this dependent on the configuration of the Java-system itself ? If it's a system-configuration thing what configuration do I need to task the basis team to look into ?
    Regards,
    Benjamin

    >
    S. Pados wrote:
    > In RAR config - optimizaiton you have to set webservice i/o and netweaver lock to NO. These are giving issues when set to yes. It resolved it at our system. don't forget to restart the server after changing these values.
    >
    > Regards,
    > Stefan
    Hello Stefan,
    we are currently on SAP GRC AC 5.3 SP13 (withouth the Patches). The changes we do in the webinterface for the two settings you have mentionened are not written to the database (execute select * from virsa_cc_config in the CC Debugger-Webinterface and look for IDs 250 and 251). This is a known bug.
    For parameter "Store WebService Input/Output parameters objects in database Yes/No?" there seems to be a workaround by inserting the setting into the table directly (SNOTE 1508611). Can you confirm that the entry with CNFGPARAM-ID=251 exists in the table in your system (with value NO)?
    For parameter "Use Net Weaver Logical Lock Yes/No?" there's the same issue. The workaround is described in SNOTE 1528592. Can you please confirm that theres an entry CNFGPARAM-ID=250 with value NO in your table ?
    If you confirm the two settings I will have our IT guys insert those entries into the DB table.
    P.S.: We are not planning to implement any Patches or SPs any time soon because we are doing the Ramp-up for SAP GRC 10.0. We want to check out the functionality in there first and not put too much effort into patching the "old" version right now.
    @Chris Chapman:
    I will have someone check the server logs for the errors that are described in the SNOTE you provided. Thanks for the help.

  • SAP GRC AC: Organizational rules at Batch risks analysis and Dashboards

    Dear All.
    I would like to know GRC AC is able to consider the organizational rules defined (for example: risk only affected to Company, BUKRS 0001) at the Batch risks analysis and at the Dashboard. I already know that for the ad-hoc reporting you can filter by the Org.rules created but i would like to know if this filter is also able for the Batch risks analysis.
    Thanks and regards.

    Dear all.
    As per my knowledge this parameter only sets the flag of Consider Org.Rules at the filters. This is what the guide indicates:
    "Setting the value to YES automatically selects the Consider Org Rule checkbox on the Risk Violations tab of the Access Request and
    Role Maintenance screens."
    So how are you so sure about that indicating this flag to YES will take into consideration the org rules at the Dashboards?
    Regards

  • Program batch risk analysis offline GRC AC 10.0

    Hello consultant:
    We have configurated GRC AC 10.0 RAR , when we executed risk analysis for Tx:NWBC  , the system run analysis(foreground or background) correctly but when we executed analysis for Tx:SPRO->Governance Risk and compliance->Access control->Batch Risk Analysis , the system run two jobs E:GRAC_SOD and GRAC_SOD but the jobs run only 1 second and finished sucesffully but the system no run analysis.
    Please could you help me?
    Thank you very much

    Please check view details in NWBC.
    or go to abap and select option and run it..
    and u can monitor the same using
    the tcode batch job for GRc monitor tcode dont remember u can check in guide.
    there it can show details.
    need tcodes and all ,please post
    Regards,
    Prasant

  • Batch Risk Analysis in Full Sync mode with special user groups not working

    Dear All,
    we start Batch Risk Analyse Job in Full Sync with special User groups (use Range). In the Joblog I can see, that he selecet lesser users as in jobs before. But after all is finished (also managment job) when I go in Informer, he shows me also this user groups I have no analysed in Backgroudjob... Also he shows me in the detailed anlayse the date from a run before.. And we have deactivated some Risk - these are still in the analysis.
    Have some one a information for me what here is wrong..
    Best Regards
    Gabriele Herr

    to old..

  • Batch risk analysis over cross system

    Hi,
    I have the folllowing problems with batch risk analysis over cross system group (SP14) when I run the batch risk job over this group of connector:
    - The number of users analyzed are wrong in reports.
    - The last update date are wrong in reports.
    - The reports shows some risks with locked and expired users. For example I have 3 connector in a group and user A is not locked in connector 1 but locked in 2 and 3. The reports shows this A user in all the connectors included in the cross system.
    Does anyone have a similar scenario? How resolve it? Any tip is welcome.
    Kind regards,

    Hi,
    SAP solved my problems with the following notes:
    -1988650 - GRC 10.0: user analyzed for single & cross connector and SAP_ALL profile disappear for cross system in ad-hoc risk analysis.
    - 2028860 - AC10.0 GRACMGRISKD table shows riskid for riskcount zero
    Regards,

  • Error while executing the Job for Objects :null  Batch Risk Analysis

    Hi All,
    We've recently upgraded Virsa to version  5.3_14 .  I'm encountering a problem when executing the Batch Risk Analysis job for users, roles and profiles.  The job does not complete for some objects and it seems to be sporadic and shows this error: -
    Background Job History: job id=395, status=2, message=Error while executing the Job for Object(s) :ABROWN:null                                                                               
    I've attached the log for your review.
    Thanks in advance for your help.                                                                               
    Linda Lewis                                                                               
    Feb 9, 2011 1:47:53 PM com.virsa.cc.xsys.meng.ObjAuthMatcher <init>
    FINEST: ObjAuthMatcher constructed: 4ms, #singles=2141, #ranges=0, #super=0
    Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.riskanalysis.AnalysisEngine riskAnalysis
    WARNING:  Job ID:395 : Failed to run Risk Analysis
    java.lang.StringIndexOutOfBoundsException at java.lang.String.substring(String.java:1019)
    at com.virsa.cc.xsys.util.RuleLoader.getPermRule(RuleLoader.java:573)
    at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1609)
    at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:321)
    at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchRiskAnalysis(BatchRiskAnalysis.java:1166)
    at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1464)
    at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:560)
    at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:363)
    at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:375)
    at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:92)
    at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:444)
    at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1236)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
    at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(AccessController.java:207)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
    FINEST: Lock:1004
    Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock unlock
    FINEST: Unlock:1004
    Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchRiskAnalysis
    WARNING: Error: while executing BatchRiskAnalysis for JobId=395 and object(s):ABROWN: Skipping error to continue with next object: null Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BgJob updateJobHistory
    FINEST: --- @@@@@@@@@@@ Updating the Job History -
    2@@Msg is Error while executing the Job for Object(s) :ABROWN:null
    Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
    INFO: -
    Background Job History: job id=395, status=2, message=Error while executing the Job for Object(s) :ABROWN:null
    Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
    FINEST: Lock:1004
    Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock unlock
    FINEST: Unlock:1004
    Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchRiskAnalysis
    INFO: --- BKG User Permission Analysis (System: P20:020) completed ---  elapsed time: 4522 ms
    Feb 9, 2011 1:47:54 PM com.virsa.cc.xsys.util.Lock lock
    Edited by: Linda Lewis on Feb 9, 2011 9:08 PM

    Hi,
    Was a solution found for this error?
    Thanks,
    Glen

  • Error while executing Batch Risk Analysis job in full sync mode

    Hi Gurus,
    I am getting following error while executing Batch Risk Analysis job in full sync mode for the first time, please help me out.
    May 12, 2011 3:57:26 AM com.virsa.cc.multi.node.dao.NodeDAO deleteMTGenObjTable
    INFO: In deleteMTGenObjTable() deleting from VIRSA_CC_MTGENOBJ for jobid = 100
    May 12, 2011 3:59:53 AM com.virsa.cc.multi.node.dao.NodeDAO deleteMTGenObjTable
    INFO: In deleteMTGenObjTable() deleting from VIRSA_CC_MTGENOBJ for jobid = 100
    May 12, 2011 3:59:53 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchSyncAndAnalysis
    INFO: --- Batch Sync/Analysis/Mgmt Report completed ---  elapsed time: 104907817 ms
    May 12, 2011 3:59:53 AM com.virsa.cc.xsys.bg.BgJob setStatus
    INFO: Job ID: 100 Status: Error
    May 12, 2011 3:59:53 AM com.virsa.cc.xsys.bg.BgJob updateJobHistory
    FINEST: --- @@@@@@@@@@@ Updating the Job History -
    2@@Msg is Error Job not completed
    May 12, 2011 3:59:53 AM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
    INFO: -
    Background Job History: job id=100, status=2, message=Error Job not completed
    May 12, 2011 3:59:53 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
    INFO: -
    Complted Job =>100----
    May 12, 2011 3:59:53 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
    INFO: Daemon idle time longer than RFC time out, terminating daemon [211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/. Thread ID 0
    May 12, 2011 3:59:53 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob start
    INFO: Analysis Daemon ID [211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/. Thread ID 0 terminiated
    May 12, 2011 4:00:35 AM com.virsa.cc.xsys.bg.AnalysisDaemonThread run
    FINEST: Analysis Daemon Thread: Invoking (HTTP): http://10.66.218.68:52100/webdynpro/dispatcher/sap.com/grc~ccappcomp/BgJobStart?daemonId=[211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/.&threadId=0&daemonType=BG
    May 12, 2011 4:01:36 AM com.virsa.cc.xsys.bg.AnalysisDaemonThread run
    FINEST: Analysis Daemon Thread: Invoking (HTTP): http://10.66.218.68:52100/webdynpro/dispatcher/sap.com/grc~ccappcomp/BgJobStart?daemonId=[211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/.&threadId=0&daemonType=BG
    May 12, 2011 4:02:37 AM com.virsa.cc.xsys.bg.AnalysisDaemonThread run
    FINEST: Analysis Daemon Thread: Invoking (HTTP): http://10.66.218.68:52100/webdynpro/dispatcher/sap.com/grc~ccappcomp/BgJobStart?daemonId=[211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/.&threadId=0&daemonType=BG
    May 12, 2011 4:02:37 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob start
    INFO: Analysis Daemon ID [211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/. Thread ID 0 started
    May 12, 2011 4:02:38 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob start
    FINEST: Another Analysis Daemon ID [211288050]/usr/sap/DAC/JC21/j2ee/cluster/server0/. Thread ID 0 is already running

    Hi,
    May be it worked in your case How the job names going to affect the execution of the job. The issue is purely because of RFC timeout (As per the logs). I recommend to change the parameter in the configuration tab as recommended by Sunny in the previous thread.
    Regards,
    Raghu

  • GRC AC 10.1 - Risk Analysis: No rules were selected

    Hi All,
    I'm currently configuring the ARA module in GRC AC 10.1, and an facing this issue. When I run my User Analysis, its throwing an error message "No rules were selected'.
    As per your suggestions from discussions, i double checked all the below activities
    Activate the BC sets
    Run Sync Jobs
    Run Batch Risk Analysis
    After all this I found that the functions are not mapped to the logical groups(Back-end Systems) I have defined. Can you please let me know how to make sure you have correct back end system(logical Group) updated for the functions in the setup? Doesn't the configurations Connector/Connector Groups etc already mapped the functions to the back-end system? It would be a hell of work to do all the system mapping on function level manually.

    Hi Narsimha
    You need to map your connectors to the logical systems that are used in the function definitions
    Look at your integration framework Setup in the IMG.
    Governance, Risk and Compliance > Common Component Settings > Integration Framework > Maintain Connectors and Connection Types
    Also, for 10.1 there was an issue with logical systems. It may be that your configuration is correct: Re: GRC 10.0 SP14 - Poblems when generating rules for logical systems
    Regards
    Colleen

  • Error during Full Synch Batch Risk Analysis - RAR

    Hi All,
    We are implementation SAP GRC AC 5.3 - SP 9 - RAR
    Currently we have uploaded the text objects and permission objects and performed full sych for User, Roles & Profile with the backend system and it was successful
    Then we have uploaded all the RAR Standard text files for SoD Rules and scheduled a Full Sych for Batch Risk Analysis as a post installation activity. But we got an error as below after 85% of completion and the background job failed.
    WARNING: Error: while executing BatchRiskAnalysis for JobId=12 and object(s):T-RD470878: Skipping error to continue with next object: Batch rolled back. Caused by java.sql.BatchUpdateException: ORA-01653: unable to extend table SAPSR3DB.VIRSA_CC_PRMVL by 8192 in tablespace PSAPSR3DB
    Can somebody please help us in resolving the above error message. Is it something to do with the table space availablity ?
    What are the consequences if we have not scheduled the Full Synch Batch Risk Analysis and start using the tool.We have to add some custom t-codes to the Standard rule set thereby tailoring it to the business requirement.
    Thanks and Best Regards,
    Srihari.K

    Sri,
       As Gangadhar mentioned this is a tablespace issue. You need to make sure to have enough space while running full sync risk analysis job. Please extend your database space and run the risk analysis job again.
    Regards,
    Alpesh

  • Faield to run Batch Risk Analysis BG JOB in RAR

    Dear Expert,
    While doing batch risk analysis (Including all User/Role/Profile  Action and Permission level analysis with Management Report), often we are getting the following error , that we found from the log.
    Feb 7, 2009 8:32:23 AM com.virsa.cc.xsys.riskanalysis.AnalysisEngine riskAnalysis
    WARNING:  Job ID:188 : Failed to run Risk Analysis
    java.lang.Exception: Cannot extract data from system (ECQCLNT360); for more details, refer to ccappcomp.n.log
         at com.virsa.cc.xsys.meng.MatchingEngine.matchActRisks(MatchingEngine.java:118)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1104)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:297)
         at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchRiskAnalysis(BatchRiskAnalysis.java:1047)
         at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1369)
         at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:402)
         at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:264)
         at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:240)
         at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:80)
         at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:436)
         at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1225)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
         at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:219)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Feb 7, 2009 8:32:23 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchRiskAnalysis
    WARNING: Error: while executing BatchRiskAnalysis for JobId=188 and object(s):T-EQ462534: Skipping error to continue with next object: Cannot extract data from system (ECQCLNT360); for more details, refer to ccappcomp.n.log
    Feb 7, 2009 8:32:23 AM com.virsa.cc.xsys.bg.BgJob updateJobHistory
    FINEST: --- @@@@@@@@@@@ Updating the Job History -
    2@@Msg is Error while executing the Job for Object(s) :T-EQ462534:Cannot extract data from system (ECQCLNT360); for more details, refer to ccappcomp.n.log
    Feb 7, 2009 8:32:23 AM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
    INFO: -
    Background Job History: job id=188, status=2, message=Error while executing the Job for Object(s) :T-EQ462534:Cannot extract data from system (ECQCLNT360); for more details, refer to ccappcomp.n.log
    Feb 7, 2009 8:32:23 AM com.virsa.cc.xsys.riskanalysis.AnalysisEngine riskAnalysis
    INFO:  Job ID:188 : Exec Risk Analysis
    Feb 7, 2009 8:32:23 AM com.virsa.cc.xsys.riskanalysis.AnalysisEngine performActPermAnalysis
    INFO:  Job ID:188 : Analysis starts: T-EQ462535
    Feb 7, 2009 8:32:24 AM com.virsa.cc.comp.VirsaXSR3_02Interface execute
    WARNING: VIRSAXSR3_02: Cannot execute BAPI AuthForProf
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:107)
         at com.virsa.cc.comp.VirsaXSR3_02Interface.execute(VirsaXSR3_02Interface.java:279)
         at com.virsa.cc.comp.wdp.InternalVirsaXSR3_02Interface.execute(InternalVirsaXSR3_02Interface.java:1341)
         at com.virsa.cc.comp.wdp.InternalVirsaXSR3_02Interface$External.execute(InternalVirsaXSR3_02Interface.java:1376)
         at com.virsa.cc.comp.BackendAccessInterface.executeBAPIModel(BackendAccessInterface.java:3393)
         at com.virsa.cc.comp.BackendAccessInterface.execBAPI(BackendAccessInterface.java:407)
         at com.virsa.cc.comp.BackendAccessInterface.executeBAPI(BackendAccessInterface.java:302)
         at com.virsa.cc.comp.wdp.InternalBackendAccessInterface.executeBAPI(InternalBackendAccessInterface.java:4227)
         at com.virsa.cc.comp.wdp.InternalBackendAccessInterface$External.executeBAPI(InternalBackendAccessInterface.java:4692)
         at com.virsa.cc.dataextractor.bo.DataExtractorSAP.getObjActions(DataExtractorSAP.java:213)
         at com.virsa.cc.dataextractor.bo.DataExtractorSAP.getObjActions(DataExtractorSAP.java:105)
         at com.virsa.cc.xsys.meng.MatchingEngine.getObjActions(MatchingEngine.java:770)
         at com.virsa.cc.xsys.meng.MatchingEngine.matchActRisks(MatchingEngine.java:112)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.performActPermAnalysis(AnalysisEngine.java:1104)
         at com.virsa.cc.xsys.riskanalysis.AnalysisEngine.riskAnalysis(AnalysisEngine.java:297)
         at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchRiskAnalysis(BatchRiskAnalysis.java:1047)
         at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1369)
         at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:402)
         at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:264)
         at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:240)
         at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:80)
         at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:436)
         at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1225)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
         at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:219)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Could you please let me know why does it happening ? During installation of the system I have done Performance Optimization according SAP Notes. Instead of this again and again we are facing this problem.
    But If I do Batch Risk Analysis One by One, let say First we have done User Analysis with Mgmt Report next has been done Role Analysis then profile, according to that we got the successfull result.
    Thanks & Regards
    Pavel Das
    PwC India
    +919874886293

    Dear Alpesh,
    Good to hear you from sdn.
    Yes, It works properly when I have scheduled some of the profile and some of the Roles along with Management Report.
    It does not work when I have shecduled all the Roles and Profile together.
    So what would be your suggestion for Batch Risk Analysis ?
    Thanks
    Pavel

Maybe you are looking for