GRC AC 10 EAM - Is it possible to send FF logs to controller in an email as attachment ?

Hello,
I am new to GRC AC 10 and wanted to check if In GRC AC 10 it is possible to send the Firefighter logs to Controller in an email as an attachment like we were doing in 5.3 or the controller has to login to GRC (via link in the email or direct login to GRC) to view ?
Mark

Hello Colleen,
Thanks for your reply.
I am using most of these parameters for my FF set up and it is working as expected however I am not able to get the logs in an email as an attachment like we used to get in AC 5.3 .
In NWBC as well we have 3 options for controller-
Email - Controller receives the email with link to GRC action logs - No "Submit " button to approve
Workflow - Controller receives the email with link to GRC action logs - Gets "Submit" button to approve
Log Display - No email , Need to manually generate the logs.
Do you know specific parameter settings or any other way to achieve this.
Regards
Ritu Rawat

Similar Messages

Possible?: Send OS X Error Report to custom email address?

Hi,
I was wondering is it possible to somehow tweak OS X so that instead of sending software error reports to Apple, it would send them to my email?
I would use this as a part of our helpdesk ticketing system.

Hi,
I was wondering is it possible to somehow tweak OS X so that instead of sending software error reports to Apple, it would send them to my email?
I would use this as a part of our helpdesk ticketing system.

Is it possible to have my text messages sent to my email as well? or is there a way to view them other than on the phone?

is it possible to have my text messages sent to my email as well? or is there a way to view them other than on the phone?

Sure. Go to the conversation that contains the message(s) you wish to forward. Tap the Edit button in the upper right corner. Select the message(s) you wish to forward using the radio buttons. Tap "Forward" at the bottom right of the screen.

I'm not able to send emails with mail.ru. Receiving and reading is not a problem. When I create a email with mail.ru its not possible to send it although its stored in my mail.ru account as "still to be send". What can it be??

I'm not able to send emails with mail.ru. Receiving is not a problem. Creating a mail is also not a problem and the mail will be stored at mail.ru as still to be send, only problem is its not possible to send. I noticed the buttons for sending change colour when used but they don't perform. What it is?

Don't know what changed, but all of a sudden able to send emails by mail.ru ...... sorry for bothering.

Possible to send the 50,000 records at a time using proxy?

Hi All,
I am using the proxy to send the data form SAP to PI and then send it to Receciver by using JMS. Here i have a small issue.... is it possible to send the 50,000 records at a time using proxy? If not please suggest me how can i send bulk of records through proxy?
Thanks
Karthik.

is it possible to send the 50,000 records at a time using proxy? If not please suggest me how
can i send bulk of records through proxy?
you can try this in steps...do not go for a BigBang testing :)....check how much your XI system can handle at a time...then you may need to tune the system parameters to accomodate more message size.....how to do this??...check the below document..section 3.9.2 (Special Cases)
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2016a0b1-1780-2b10-97bd-be3ac62214c7
Regards,
Abhishek.

Is it possible to send a text to several contacts at the same time and not have their replies go to everyone on the list? I have an iphone 4s and most of the people I am texting also have iPhones. I do have group messaging turned off.

Is it possible to send a text from the iphone 4s to several contacts and not have their replies go to everyone else on the original text? I have group messaging turned off but this seems to do nothing.

Do this instead:
Email everyone instead of texting and use BCC: which will hide all of the people's emails.

Is not possible to send a sms from Italy to Belaru...

Hi Guys,
I am stay in Italy on my personal computer, through an italian account from my list of skype, I can not delivery a sms at price of 0,078 € to a mobile phone in Belarus. In fact beside there is the message "delivered not yet".
Viceversa I can, through a Belarus account or Moldavian account of my list of Skype, regardless of their are on-line or off-line, sending a sms to a mobile phone in Belarus always at the price of 0,078 €.
I can not understand because is not possible to send a sms by italian account while is it possible by belarus account or moldavian account.
Thank you everybody.

Hi Xperts,
Have found the solution by using the Standard Program RSWNSENDMAIL1. Need to pass the sender
userid in the field of 'User id for System Logon.
ThanQ.
Krishna.

Is it possible to send an alert or notification once short dump happens?

Is it possible to send a notification automaticlly to system administrator if a short dump happens?
Thanks for your answer.

Hi Ya,
You need to configure CCMS alerts to be sent by mail or sms..
read this thread
XI - CCMS alerts send to external Email ID's
and this blog
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
hope this help!
Juan
Please reward with points if helpful

Is it possible to send xls attach in mail in background ?

is it possible to send xls attach in mail in background ?
i build/copy program to send attach file in xls format ,
its work fine in foreground but do nothing in background ,
What can be the reason?
the section of the sending :
DATA: LD_ERROR    TYPE SY-SUBRC,
        LD_RECIEVER TYPE SY-SUBRC,
        LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
        LD_EMAIL LIKE SOMLRECI1-RECEIVER,
        LD_FORMAT TYPE SO_OBJ_TP ,
        LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
        LD_ATTFILENAME TYPE SO_OBJ_DES ,
        LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
        LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
        LD_RECEIVER LIKE SY-SUBRC.
LD_EMAIL   = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT              = P_FORMAT.
LD_ATTDESCRIPTION      = P_ATTDESCRIPTION.
LD_ATTFILENAME         = P_FILENAME.
LD_SENDER_ADDRESS      = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
     ( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME   = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM   = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE   = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME   = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE   = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = LD_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      DOCUMENT_DATA              = W_DOC_DATA
      PUT_IN_OUTBOX              = 'X'
      SENDER_ADDRESS             = LD_SENDER_ADDRESS
      SENDER_ADDRESS_TYPE        = LD_SENDER_ADDRESS_TYPE
      COMMIT_WORK                = 'X'
    IMPORTING
      SENT_TO_ALL                = W_SENT_ALL
    TABLES
      PACKING_LIST               = T_PACKING_LIST
      CONTENTS_BIN               = T_ATTACHMENT
      CONTENTS_TXT               = IT_MESSAGE
      RECEIVERS                  = T_RECEIVERS
    EXCEPTIONS
      TOO_MANY_RECEIVERS         = 1
      DOCUMENT_NOT_SENT          = 2
      DOCUMENT_TYPE_NOT_EXIST    = 3
      OPERATION_NO_AUTHORIZATION = 4
      PARAMETER_ERROR            = 5
      X_ERROR                    = 6
      ENQUEUE_ERROR              = 7
      OTHERS                     = 8.
Populate zerror return code
LD_ERROR = SY-SUBRC.
Populate zreceiver return code
LOOP AT T_RECEIVERS.
    LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.

Try this example, not sure where I got this, but it works.
report zmail_excel.
parameters: p_email   type somlreci1-receiver
                               default '[email protected]'.
data: begin of it001 occurs 0,
      bukrs type t001-bukrs,
      butxt type t001-butxt,
      end of it001.
data:   imessage type standard table of solisti1 with header line,
        iattach type standard table of solisti1 with header line,
        ipacking_list like sopcklsti1 occurs 0 with header line,
        ireceivers like somlreci1 occurs 0 with header line,
        iattachment like solisti1 occurs 0 with header line.
start-of-selection.
select bukrs butxt into table it001 from t001.
*   Populate table with detaisl to be entered into .xls file
perform build_xls_data .
* Populate message body text
clear imessage.   refresh imessage.
imessage = 'Please find attached excel file'.
append imessage.
* Send file by email as .xls speadsheet
perform send_email_with_xls tables imessage
                                      iattach
                                using p_email
                                      'Example Excel Attachment'
                                      'XLS'
                                      'TestFileName'
                                      'CompanyCodes'.
*      Form BUILD_XLS_DATA
form build_xls_data .
constants: con_cret type x value '0D', "OK for non Unicode
             con_tab type x value '09'.   "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
*    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
*    con_cret type c value cl_abap_char_utilities=>CR_LF.
concatenate 'BUKRS' 'BUTXT'
         into iattach separated by con_tab.
concatenate con_cret iattach into iattach.
append iattach.
loop at it001.
    concatenate it001-bukrs it001-butxt
           into iattach separated by con_tab.
    concatenate con_cret iattach into iattach.
    append iattach.
endloop.
endform.
*      Form SEND_EMAIL_WITH_XLS
form send_email_with_xls tables pit_message
                                          pit_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription.
data: xdocdata like sodocchgi1,
        xcnt type i.
* Fill the document data.
xdocdata-doc_size = 1.
* Populate the subject/generic message attributes
xdocdata-obj_langu = sy-langu.
xdocdata-obj_name = 'SAPRPT'.
xdocdata-obj_descr = p_mtitle .
* Fill the document data and get size of attachment
clear xdocdata.
read table iattach index xcnt.
xdocdata-doc_size =
     ( xcnt - 1 ) * 255 + strlen( iattach ).
xdocdata-obj_langu = sy-langu.
xdocdata-obj_name   = 'SAPRPT'.
xdocdata-obj_descr = p_mtitle.
clear iattachment. refresh iattachment.
iattachment[] = pit_attach[].
* Describe the body of the message
clear ipacking_list. refresh ipacking_list.
ipacking_list-transf_bin = space.
ipacking_list-head_start = 1.
ipacking_list-head_num = 0.
ipacking_list-body_start = 1.
describe table imessage lines ipacking_list-body_num.
ipacking_list-doc_type = 'RAW'.
append ipacking_list.
* Create attachment notification
ipacking_list-transf_bin = 'X'.
ipacking_list-head_start = 1.
ipacking_list-head_num   = 1.
ipacking_list-body_start = 1.
describe table iattachment lines ipacking_list-body_num.
ipacking_list-doc_type   = p_format.
ipacking_list-obj_descr = p_attdescription.
ipacking_list-obj_name   = p_filename.
ipacking_list-doc_size   = ipacking_list-body_num * 255.
append ipacking_list.
* Add the recipients email address
clear ireceivers. refresh ireceivers.
ireceivers-receiver = p_email.
ireceivers-rec_type = 'U'.
ireceivers-com_type = 'INT'.
ireceivers-notif_del = 'X'.
ireceivers-notif_ndel = 'X'.
append ireceivers.
call function 'SO_DOCUMENT_SEND_API1'
       exporting
            document_data              = xdocdata
            put_in_outbox              = 'X'
            commit_work                = 'X'
       tables
            packing_list               = ipacking_list
            contents_bin               = iattachment
            contents_txt               = imessage
            receivers                  = ireceivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
endform.
Regards,
Rich Heilman

Is it possible to send a text message using the UDP protocol?

Support doc
http://www.adobe.com/support/director/multiuser/using_udp/using_udp02.html
says to use the following format with connectToNetServer:
errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
"chatServer.myCompany.com", #logonInfo: [#userID: "Bob",
#password:
"MySecret", #movieID: "Tech Chat"], #mode: #smus,
#localUDPPort: 1627,
#localAddress: "123.45.67.89", #remoteTCPPort: 1626])
But if I change the mode to #text, it still sends out
messages as smus.
In fact, if I leave out the UDP parameters altogether but
still use the
list parameters for connectToNetServer, it still always sends
as smus.
Sends as smus:
errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
"chatServer.myCompany.com", #logonInfo: [#userID: "Bob",
#password:
"MySecret", #movieID: "Tech Chat"], #mode: #text,
#localUDPPort: 1627,
#localAddress: "123.45.67.89", #remoteTCPPort: 1626])
Sends as smus:
errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
"chatServer.myCompany.com", #logonInfo: [#userID: "Bob",
#password:
"MySecret", #movieID: "Tech Chat"], #mode: #text])
Only the string parameter method can be made to send text
messages.
Sends as text:
errCode = gMultiuserInstance.connectToNetServer("Bob",
"MySecret",
"chatServer.myCompany.com", 1626, "Tech Chat", 1)
Am I missing something? Is this a known issue? Anyone have a
work around?
-Jeremy

Drat!
Thanks for the answer though.
alchemist wrote:
> The multiuserXtra supports either tcp text or tcp smus
connections.
> The ability to send udp messages was an expansion to the
original mus
> protocol/xtra and is valid only for muXtra instances
already connected in
> smus mode.
> So, if you are asking if you can create a udp instance
and use it at will
> (exchange udp messages with some remote udp socket),
then the answer is no.
>
>
> "Jeremy Aker" <[email protected]> wrote in message
> news:[email protected]...
>> I'm really sorry that I wasn't clear enough. I'll
repeat the questions
>> more concisely.
>> Is it possible to send a text message using the UDP
protocol? If so, how?
>> Is the bug I described in my original message (see
below) really a bug or
>> am I doing something wrong?
>> If it's a bug, does anyone have a work around?
>>
>> alchemist wrote:
>>> And the question is?
>>>
>>> "Jeremy Aker" <[email protected]> wrote in
message
>>> news:[email protected]...
>>>> Support doc
>>>>
http://www.adobe.com/support/director/multiuser/using_udp/using_udp02.html
>>>> says to use the following format with
connectToNetServer:
>>>> errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
>>>> "chatServer.myCompany.com", #logonInfo:
[#userID: "Bob", #password:
>>>> "MySecret", #movieID: "Tech Chat"], #mode:
#smus, #localUDPPort: 1627,
>>>> #localAddress: "123.45.67.89",
#remoteTCPPort: 1626])
>>>>
>>>> But if I change the mode to #text, it still
sends out messages as smus.
>>>> In fact, if I leave out the UDP parameters
altogether but still use the
>>>> list parameters for connectToNetServer, it
still always sends as smus.
>>>>
>>>> Sends as smus:
>>>> errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
>>>> "chatServer.myCompany.com", #logonInfo:
[#userID: "Bob", #password:
>>>> "MySecret", #movieID: "Tech Chat"], #mode:
#text, #localUDPPort: 1627,
>>>> #localAddress: "123.45.67.89",
#remoteTCPPort: 1626])
>>>>
>>>> Sends as smus:
>>>> errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
>>>> "chatServer.myCompany.com", #logonInfo:
[#userID: "Bob", #password:
>>>> "MySecret", #movieID: "Tech Chat"], #mode:
#text])
>>>>
>>>> Only the string parameter method can be made
to send text messages.
>>>> Sends as text:
>>>> errCode =
gMultiuserInstance.connectToNetServer("Bob", "MySecret",
>>>> "chatServer.myCompany.com", 1626, "Tech
Chat", 1)
>>>>
>>>> Am I missing something? Is this a known
issue? Anyone have a work
>>>> around?
>>>>
>>>> -Jeremy
>

Is it possible to create a standard form that can be emailed to anyone and once filled out by the receiver, have a button that the receiver clicks and the form is encrypted and attached an email back to the sender and a preset admin password would open it

Is it possible to create a standard form that can be emailed to anyone and once filled out by the receiver, have a button that the receiver clicks and the form is encrypted and attached to an email back to the sender and a preset admin password would open it?

Hello Graphicsguy123,
You would need to first create the form ( or Widget in EchoSign) first to generate a url which you can paste it in the email being sent to customers. You would need to make sure you have a Document Cloud Enterprise Premium account in order to create a Widget. If you don't have the account, you can use the trial version to test it. Here is the link:
Global Trial Registration | eSign services from Adobe
-Rijul

Is it possible to send a fcp x project (media and events) to be finished on a imac running fcp7?

I started a project using FCP X on a Macbook as part of a training workshop in a school. The school have requested that, if possible, I send the rough cut and all media to them, as they have access to FCP 7 running on an iMac. What is the best way to approach this?

You need this little app to convert it:
http://assistedediting.intelligentassistance.com/Xto7/
Andy

Is it possible to send a instance to error hospital for business errors?

I have a business cenario where if an error is returned from an external service the first time it will automatically retry. The second time it will need to be sent for manual resolution which I was thinking of doing in the error hospital (human intervention) does anyone know if it is possible to send an instance for human-intervention from within the process rather from the fault policies?

We have an instance where sometimes we are sending embedded tiff images to an external service and if the image is corrupt we need to allow the users to terminate the process. Unfrotunately there are no capabilities to send any notifications (email/sms/fax/voicemail) and need to notify the user of the corrupt image and to terminate the process. We could use a worklist task and but the business have defined this as a support team responsibility and want to use the same manual recovery console for all errors. (activities tab)

Is it possible to send a copy of invoice as PDF files to sales agents by e-

Hi All,
Please let me know my client needs this below requirement,
Is it possible to send a copy of invoice as PDF files to sales agents by e-mail triggered by the invoicing or is it only possible manually through ZPDF?
Best Regards
Aditya

Hi,
Yes,It is possible to send an email as PDF file to desired people.
For this we have to use the medium as "5(External send)".
Also maintain the further data as "4".
Ask your ABAPer to write a code to send the e-mail to sales agents.
We have a similar requirement in our project also to send a PDF.We have developed a "Z" program and developed a "Z" smartform too.
Regards,
Krishna.

Is it possible to send a copy of invoice as PDF files to sales agents

Hi All,
Please let me know my client needs this below requirement,
Is it possible to send a copy of invoice as PDF files to sales agents by e-mail triggered by the invoicing or is it only possible manually through ZPDF?
Best Regards
Aditya

Hi,
You need to setup an output for this, with partner fundtion 'External Send' and Comunication strategy.
There is SAP note 454893 available, please refer the same.
regards
Vivek.

GRC AC 10 EAM - Is it possible to send FF logs to controller in an email as attachment ?

Similar Messages

Maybe you are looking for