GRC AC 10 Installation on Which System?

Dear All,
I am new to GRC and have been asked to install it at my current company. I have done the training almost 2 years ago but haven't had the chance to use it until now.
Apologies for the basic questions, I have searched but cant find a suitable answer.
My company only has Dev, Test and Prod as well as a sandbox which is a copy of Prod. I've installed AC10 on the sandbox. We are only using EAM and Risk analysis. I'm still working on the risk config but EAM is up and running fine.
My questions are:
1. Can I install the Add on in DEV and have test and Prod connected to Dev? I'm seeing that the best practice is to install it on a separate stack, but we don't have that option.
2. What are the risks in doing this?
3. Is there a better way?
Any advice greatly appreciated.
Thanks
Debbie

Hi Deb
SAP installation guide recommends GRC is installed as its on component. Plug-ins are then installed to the ERP/ECC or any other system you intend to connect to GRC.
I have heard of cases where clients attempt to cut costs by installing on Solman or ERP. I think you will run the risks when you do support stacks - e.g. Basic release/sp as GRC may not be compatible with latest release.
I recommend you have a read of the Installation Guide in the marketplace for further information.
You do not need to have a instance for each environment. For example, you could have 2 GRC instances - one of non-prod and one for prod. Add your sandpit, dev, QA to non-prod for your connectors. You will need to consider your testing strategy which may come back to how much functionality you are using (workflow, etc)
Regards
Colleen

Similar Messages

Can't install latest version of itunes. "Errors occurred during installation. Your system has not been modified." Help?

Can't install latest version of itunes. "Errors occurred during installation. Your system has not been modified." Help?

I had this, and after a large number of fruitless attempts, I had to reload Windows, which solved it. This was of course a real pain, but I had to do it since updating iTunes was necessary in order to get the new iOS version. But before doing such a drastic thing, you could try to restore Windows to a previous point in time by picking a restore point. This of course presumes that you really have some issues with your Windows (which I had) and that you can make a decent guess on when the system was ok (which I couldn't), i.e that you can decide a good date to restore to.

What do I do when I am trying to install my new version of itunes, and it says this: The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified.

What do I do when I am trying to install my new version of itunes, and it says this: The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified.

I had this, and after a large number of fruitless attempts, I had to reload Windows, which solved it. This was of course a real pain, but I had to do it since updating iTunes was necessary in order to get the new iOS version. But before doing such a drastic thing, you could try to restore Windows to a previous point in time by picking a restore point. This of course presumes that you really have some issues with your Windows (which I had) and that you can make a decent guess on when the system was ok (which I couldn't), i.e that you can decide a good date to restore to.

Which system variable is reset at the exit of a loop of an internal table

which system variable is reset at the exit of a loop of an internal table
a)sy-loop b)sy-index c)sy-dbcnt d)sy-tabix

You might want to revist your threads from Friday, and award points and mark as "Answered" or "Solved".
Regards,
Rich Heilman

Which system field returns the number of records returned after a select?

Which system field returns the number of records returned after a select?
a) sy-index
b) sy-recno
c) sy-lncnt
d) sy-dbcnt
e) sy-tabix

Hi,
SY-DBCNT
Regards,
Prashant

I have a Macbook pro 2009 with Snow Leopard. Which system can I install without running into complicated problems which I will not be able to solveby myself? (Mountain Lion, Mavericks, Yosemite?)

I have a Macbook pro 2009 with Snow Leopard. Which system can I install without running into complicated problems which I will not be able to solve by myself- a person with limited problem solving abilities. (Mountain Lion, Mavericks, Yosemite?)

It will make it easier to help you w/ your problem to know the size and RAM installed.
"Yesterday I couldn't update the maps on my Garmin because it said the OS I had wouldn't work"
What OS will your Garmin work with? Funny there was someone else that did that and upgraded to Yosemite and regretted it.
I'd say Lion if your Garmin is compatible.
Both Lion and Mountain Lion are downloadable from the Apple Store:
http://store.apple.com/us/product/D6106Z/A/os-x-lion
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
The OSs will get more resource hungry the higher you go.

Table in which system updates data collected through KKRV

Hi,
Can any one tell me the table in which system updates data collected through KKRV?
and the correct procedure to collect the data for product drilldown.
can i run KKRC alogwith KKRV to get summerized reports?
Thanks in advance
Regards,

You could probably trace them at COSP or COSS tables where the object starts with VD (summarization object).
Summarization transaction are better if run separately. First KKRV for summarising plant level information and then KKRC for hierarchy summarization.

Query created in which system

Hi All,
How to find out the query created in which system like Dev or ACC or Prod.
For ex. I want to find the queries directly created in Production.

Hi,
unfortunately there is no tool for that. So I think one way is to compare the content of table rszeltdir in both systems. Restrict the output on deftp = 'REP' and check the fields mapname and txtsh and txtlg. If you have the queries identified, check if they are assigned to a development class/packet in the productive system. If this is not the case, you have your candidates for deletion. You can then delete the queries using transaction rszdelete.
regards
Siggi
PS: you may run rszdelete anyways, as you can check a box there for temporary objects only (those will be the ones in question)

In which system field double click feild will stored

hi when you double click in interactive report, in which system field will store that value
Message was edited by:
        sudhakara reddy

Check this simple program that illustrates the interactive reports. Also look at features like HOTSPOT extension of WRITE statement and HIDE.
REPORT zakstest1 NO STANDARD PAGE HEADING.
DATA: BEGIN OF itab OCCURS 0,
        matnr LIKE mara-matnr,
        matkl LIKE mara-matkl,
        mtart LIKE mara-mtart.
DATA: END OF itab.
SELECT matnr matkl mtart FROM mara INTO TABLE itab UP TO 20 ROWS.
LOOP AT itab.
WRITE:/ itab-matnr,
          itab-matkl,
          itab-mtart.
ENDLOOP.
AT LINE-SELECTION.
IF sy-lsind = 2.
    CLEAR sy-ucomm.
    EXIT.
ENDIF.
sy-lsind = 1.
WRITE:/ sy-lisel.
*-- you can also read the specific record of the internal table and show
*   the values you want to show
CLEAR itab.
READ TABLE itab INDEX sy-lilli.
IF sy-subrc = 0.
    WRITE:/ itab-mtart,
            itab-matkl,
            itab-matnr.
ENDIF.

The Java load in database SID / hostname has not been configured yet. You cannot run an installation from the System Copy folder with this load

Dear Gurus,
We are facing the below issue when performing a homogeneous system copy of NW 7.0 system using backup/restore method for DB6 system.
The Java load in database <SID>/<hostname> has not been configured yet. You cannot run an installation from the System Copy folder with this load.
We went through the SAP Note http://service.sap.com/sap/support/notes/2049842, and followed the same but no luck.
We updated the Kernel to the latest, but still no luck.
Request for your quick help as we have to complete it by EOD today.
Thanks a lot in advance.
Best Regards,
Anuj

Hello Ashutosh ,
Thanks for your reply.
We have gone followed the below sequence:
SCS Installation
Database Instance Installation using backup/restore method
CI installation. -> getting error, when we provide the Java Components DVD.
Best Regards,
Anuj

I have an iMac 17" 1.83ghz intel core from 2006. I need to reformat the hard drive. Which system do I install - the system disk in came with or can I install 10.6.8 which is what it's running now. And does the system have to be for an iMac?

I have an iMac 17" 1.83ghz intel core from 2006. I need to reformat the hard drive. Which system do I reinstall - the system disk in came with or can I install 10.6.8 which is what it's running now. And does the system have to be for an iMac?

Reformat usiing the original install disc then update to v10.6.8.
Mac OS X 10.6: Reinstalling Mac OS X

Trying to install iTunes and get this error: "The installer encountered errors before iTunes could be configured   Errors occurred during installation. Your system has not been modified"

HELP!!!
I am trying to install iTunes on my Windows 7 laptop and get this error:
"The installer encountered errors before iTunes could be configured   Errors occurred during installation. Your system has not been modified"
Arghhhhh!! I've tried different browsers and various other things suggested on other posts to no avail

Ok people, I think I have found the solution !
If you click on the start button from your desktop screen.
Then in the "search programs and files" field type : apple software update - you can find the apple installer.
Click on the apple software update line and let the machine run it's course. I recommend updating whatever it wants to , ie: safari 5, quicktime, itunes....
I then restarted my computer and it seems to be working now !
Good luck everyone !

Hello I downloaded adobe after effect CS6, but it is not installed and asks to install Adobe Support Advisor. I turn to the site and there wrote: "The Adobe Support Advisor tool was used to analyze installer log and system information associated with inst

Hello I downloaded adobe after effect CS6, but it is not installed and asks to install Adobe Support Advisor. I turn to the site and there wrote: "The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation . " What do I do?

yes, I did that with helping message 3, I'd remove Cs6 only, but it did not help. The message "Failed to initialize the setup program. To identify the problem, download the program Adobe Support Advisor" repeat again =(

Which system is better making the TDC among DEV and PRD

HI,
which system is better making the TDC among DEV and PRD what are the advantages and disadvantages
thanks in advance
subbu

hi arif
TDC means Transport Domain Controller
it is the system which contains common transport directory and which administer the all the systems taking part in TMS.
if any other informaion regarding this welcome.
SUBBU
Message was edited by:
subbu chennuru

After installation third Operation System my Imac(27) heating quikly and better.

Good Afternoon. After installation third Operation System my Imac(27) heating quikly and better.
I had MacOs and Win7 32bit(installed in Shop). It was ok.
But 32 bit OS didnt work with 8Gb RAM. Therethore i installed Win7 64 bit.
Now i Have MacOs, Win7 32bit, Win7 64 bit.
Before installation WIn7 64bit, in Win7 32bit my Imac was working in common mode(Internet\Video) without propeller noise. But now, i have noise after 10-15 minutes Video or Browser using.
In Win7 64bit i had more propeller noise and after 10-15 minutes play computer game, i have lags and troubles with performance!! My propeller's are spinning with maximal velocity(after 10-15 minutes). Therethore i cant play games\watch Video in my Win7 64 bit. I think that i must be install someone drivers?? I have BootCamp 4.0 under my Win7 64 bit.
In Win7 32 bit, i dont have problems with perfomance, but noise is really stronger than was early.
Please, Help me!
Sorry for my bad English.
Text for Russian employee:
Я купил Imac 27 с установленный МакОс и Win7 32bit. Всё было хорошо, но под 32 бита не работает 8гб Озу.
Поэтому я установил 64битку, но под ней сильно начинают крутится кулеры и вентиляторы. Примерно через 15 минут они крутятся на максимальной скорости!! Попробовал поиграть в игры, через 15-20 минут производительность начинает падать и начинаются "подвисания". Т.е. поиграть не реально. Да и при обычном сёрфинге страниц нагрев происходит быстро и кулеры начинают крутится быстрее.
Под 32 бита производительность не падает(мной замечено не было), но нагрев происходит быстрее и кулеры начинают крутится тоже быстрее. Даже при обычном сёрфинге уже начинается шум.
Не знаю по поводу нагрева, может он и в пределах нормы, но шума до установки новой винды было меньше!
Помогите разобраться с проблемой. Я не хочу потерю производительности под Win7 64бита и хочу уменьшить шум/нагрев под обеими Окнами.

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

GRC AC 10 Installation on Which System?

Similar Messages

Maybe you are looking for