GRC AC 5.3 and GRC Process Control on the same server

Hello,
Can we install SAP GRC AC 5.3 and GRC Process Control 3.0 and GRC Risk Management 3.0 on the same box/ same server.
Is there a OSS Note, which talks about having the above 3 components on one box?
Thanks,
Imran

Hello Imran,
1- My 3 question ARE do I need a separate JAVA Stack for GRC Process Control and seperate JAVA Stack for GRC Access Control
-> No, you can have them installed on save Java stack.
OR
Can I use the same JAVA Stack for GRC Process Control & GRC Access Control?
-> Yes, you can. You have to make sure that you are on SP10 or above for Access Control as only then it will support NW Java 7.01.
2- Can I use EP 7.0.1 installed on same server for both GRC PC 3.0 and GRC AC 5.3?
-> Yes, you can.
3- Can 1 single AS JAVA Database contain both GRC Access Control VIRSA Tables and GRC Process control tables at the same time?
-> For process Control the tables reside on the backend SAP as it is webdynpro ABAP application and for access control the tables reside on the Java database as it is java and webdynpro JAVA application.
Regards, Varun

Similar Messages

RAC and RAC One Node on the same server?

Hello all,
Anyone know if having RAC and RAC One Node on the same server is possible, supported, and recommended? Our architecture group is moving towards this configuration as a standard, and I need solid direction about feasability.
Thanks for any help you can provide.
Jack Silvey| CVS Caremark | Executive Advisor, IT Systems | CVS Caremark

Yes you can have the RAC and RAC one on the same cluster. For support and recommendations raise a service request with oracle support

XI and R/3 Running on the same Server.

Hello Friends!
One year ago I've installed XI on a machine that already had a R/3 instance. Although there were different instances, one for SAP R/3 and one instance for the ABAP part of XI, I couldn't get to connect XI to the R/3, appartently XI searched for the instance through the IP address, ignoring the instance ID parameter.
Now I have again the same challenge, I have only one machine to run R/3 and XI.
Does anyone know if it is possible to do?

Hi Tadeo,
from ERP 2004 you can install XI on the same server.
Regards,
Udo

BI 7.0 and ECC 6.0 in the same server

Dear experts,
In my company the scenarion is like, we have installed ECC 6.0 in server where development work is going on.
Now we have requirement to implement the BI 7.0 in the same server as already BI content is existing in the same server.
My question is
Is it possible to implement the BI on the same server?
If yes, is it possible to extract the data from the development client on the same server where ECC 6.0 running?
If No, then what is the use of the BI contents in the ECC 6.0 server?
Regards,
SUD

Hi
> it possible to implement the BI on the same server?
Yes, why not? But that will be a separate SAP installation with different SID.
>If yes, is it possible to extract the data from the development client on the same server where ECC 6.0 running?
Yes, that is possible. Both the system will be having different Logical system name. You have to create a source system connection from ur BI to ECC system and then data extraction is possible.
>If No, then what is the use of the BI contents in the ECC 6.0 server?
BI Content in ECC is there to facilitate data extraction from ECC to BI. It would provide you the structure of data extraction. Presence of BI Cont does not mean a ECC system will be working as BI system.
Hope this clarifies your doubt.
Regards
Anindya Bose

Solman 7.1 and Netweaver 7.3 on the same server

Hi,
I am trying to install a new test environment for SAP Manufacturing execution 6.0.
That software requires Netweaver 7.3, which in turn requires Solution manager for applying Service packs.
My question is:
Can I install Solution Manager 7.1 and Netweaver 7.3 on the same application server running Windows 2008 R2 64-bit?
The DB will be MS SQL server 2008 64-bit.
I Have noticed the following so far:
- Solman requires much lower versions of JCE policy files than Netweaver. Will there be a conflict?
- Solman installation asks for Kernel NW 7.20. Why not Kernel NW 7.3?
Hope that anyone can answer this
Br,
Johan

Hi,
As right said above, Solman is a standalone installation on web application server,
You can refer this FAQ for further guidance [Solman FAQ|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b442d4ea-0c01-0010-a8ad-a4c2eaaf6b76]
check more of SAP solman 7.1 inst guides here
https://websmp210.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000735220&
Thanks,
Jansi

Oracle AS and Oracle 9i Client on the same server

Hello,
We have a Window 2000 server with Oracle 9i Client. A number of applications running on this server relies on Oracle 9i Client. Could I install Oracle AS on the same machine without causing any problems to the applications using Oracle 9i client?
Thanks
Slava

Oracle software is multi home aware - which means you can install 10 different Oracle products and versions, each in its own unique Oracle Home directory, and switch between and run all 10 different products - even at the same time (assuming sufficient resources on the platform).
You cannot "+consolidate+" different Oracle Homes - it is an unwise thing to do. The Oracle Universal Installer (OUI) has the means to determine when installing a new product, whether or not you have the option to install into an existing Oracle Home.
And with OUI you also have the means to uninstall products in which case you can remove the corresponding Oracle Home from your platform.
Note though that despite multiple homes, certain configuration files will be shared (e.g. +/etc/oratab+ on Unix systems). In such a case you may need to manually update such a configuration file after removing an Oracle Home from your system.
Oracle XE sports its own installer (setup.exe on Windows) - so it does not use OUI. But it is multi-home aware - and can co-exists with other Oracle products in their specific Oracle Homes.

Connection broker and RemoteApp manager role on the same server OK?

Hello. I may have what seems to be a strange request here. I have a currently working 3 node TS farm consisting of 2 Terminal Servers with the RemoteApp role on them and 1 server running the connection broker. All is running fine but the RemoteApps I have
published are prohibited to have the clipboard enabled for them due to PCI DSS compliance. I wanted to install some other apps and have the clipboard enabled but since it seems that the clipboard is a server setting and not a per app setting, I was hoping
to just install these apps right on the server running the connection broker vs building a separate new TS server to host them. These other apps do not need to be in the load balanced environment.
Can I just install the RemoteApp role on the CB server without any interruption to the farm?
Thanks,
Joe

Hi Joe,
Thank you for your comment.
Can you let me the OS version of RDS Server?
For better understanding, I can explain you that; RemoteApp is not a role which you need to install. But you need to install RD Web access role and then you can publish RemoteApp through that. For eg. If you are using Server 2012\R2 then you need to create
a collection and after that you can publish the RemoteApp feature which you or your user can use through RD Web Access.
As per your comment you have already TS role installed, then you can install RD Web access through role based installation, select the role and server on which you want to install it. Please refer beneath article if you have server 2008 r2.
Remote Desktop Web Access (RD Web Access)
http://technet.microsoft.com/en-us/library/cc731923.aspx
Hope it helps!
Thanks,
Dharmesh

Can sun jdk 1.5 for webstart and sapjvm co-exist on the same server?

We just installed PI 7.1. We would like to install sun jdk 1.5 on the PI 7.1 server so we can use the pi tools on the server, but we are not sure if sapjvm and sun jdk can co-exist, or if it's going to cause any problem with PI 7.1, any setting is needed to tell PI which java to use if multiple version is installed? Does anybody know?
Thanks
Jane Zhou

Kaushal,
Thanks for the reply. note 718901 mentioned to change the jdk version, parameter jstartup/vm/home in instance profile can be used. if that's the case, that should be how we tell PI system whch jdk to use? in PI 7.1, it's point to DIR_SAPJVM, which points to sapjvm_5 in \exe directory. The notes you mentioned all apply to versions before 7.1, I'm wondering if it still works the same way with 7.1 systems.
Has anybody installed a sun jdk on PI 7.1? anything that we need to pay attention to?
Thanks
Jane

I have a state space model of a complex system. can anyone help me for implementing MPC and e-MPC control for the same?????

Hi everyone. I am new to the forums, so let me be as mprecise as possible. i know the basic functionalities of Labview with MPC block etc. However, i dont know how to go ahead with implementing MPC control for a system whose state space model i possess. can anyone help me out?? the problem is that i dont even know the approach or the starting point..

This happens if you remove a program manually, but still have the registry keys to load files from this program.<br />
You can use the MSConfig program or the Autoruns utility to see which software and services are getting started.
*http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
You can use registry editor and do a search (Ctrl+D) for imesh to see if you can locate the registry key(s) that launches this program on a reboot.
Try to ask advice at a Windows oriented forum if you can't fix this.
* http://www.bleepingcomputer.com/forums/ - BleepingComputer.com - Computer Help Forums
* http://windowssecrets.com/forums/ Windows Secrets Lounge

BI and ECC 6.0 installation in the same server

Hello SAP Experts,
I am given a task of installing BI 7.0 and ECC 6.0 in the same server. Can someone suggest me of what are all the Do's and Don'ts in this scenario and what is the hardware requirements.
Thanks & Regards
Vanitha

Hi,
For installing BI, you have to install Netweaver.
You already have ECC 6.0 in the System.
As a part of BI system, you will be extracting data from ECC Ssytem and loading in BW System.
Hence if your requireement is like data is loaed in the the BW System every one hour, it will slow down the ECC System.
In future you may need to do some OS patch update, database patch update which is not required in ECC, but it will effect both systems
I have not seen any scenario where OLTP and OLAP System are in the same box
But if you are just doing for learning purpose and you are doing it in your sand box , that should be fine

Exchange 2013 Windows Server 2012 NLB and DAG on the same server

Hi all, I am installing Exchange 2013 infrastructure with two servers.
Both servers have the CAS and Mailbox roles.
For mounting on High Availability, will create a DAG.
Client Access I have no external Network Load Balancer.
I thought about installing the NLB servers in the DAG members, this could not be done before.
I do not know if in Windows Server 2012 and Exchange 2013
Can I install NLB on members of a DAG?
regards
Microsoft Certified IT Professional Server Administrator

Hi,
I’m afraid that WNLB and DAG cannot coexist in the same server. Because WNLB is incompatible with Windows failover clustering. If we're using an Exchange 2010 DAG and we want to use WNLB, we need to have the Client Access server role and the Mailbox server
role running on separate servers.
For more information, you can refer to the following article:
http://technet.microsoft.com/en-us/library/ff625247(v=exchg.141).aspx
Thanks,
Angela Shi
TechNet Community Support

DAQ and motor control in the same VI

Hello,
I am a beginner in labview and I am trying to control a maxon motor and run a NIDAQ at the same time. Basically, I need to measure the pressures and the angles at the same time and record these.
The problem that I am facing is that when I execute the VI, the motor runs first and this is followed by the measurement. I have twiddled around with it a lot getting a lot of help from this community but I can't figure it out. No matter what I do the motor starts running first and after the motor has completed its movement then the DAQ takes the measurements.
Is there any way to run the motor and the sensors together? I can run the motor seperately and I can run the sensors separately in their own VIs but can't seem to run them sequentially.
Any help would be appreciated.
Aman
Attachments:
VI.jpg ‏64 KB

In LabVIEW, your wires between VIs (and structures like While Loops) determine the order in which things happen.
There are several approaches that you can take to de-couple the motor and DAQ processes. The most obvious would be to put the motor control in one while loop, and the DAQ in another. Yes, you can do this in LabVIEW. Just don't get too carried away. Each loop usually will go to a separate core to run.
If there is data that has to be shared between the loops, you can use local variables, or the Value property nodes of the controls and indicators of your VI.
Machine Vision, Robotics, Embedded Systems, Surveillance
www.movimed.com - Custom Imaging Solutions

HT4623 I would like to have both my lock symbol and mute symbol to be off at the same time can they both be in the control at the same time

looking for a way to have. both mute in lock symbol in the control panel. don't like that I can only have one working at a time

I have posted this many, many times here. See if this helps you understand how this process works with regard to system sounds and screen rotation lock.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you are running iOS 5 or iOS 6, the system sound control is in the task bar at the bottom. Double tap the home button and swipe all the way to the right in the task bar to get to the speaker icon on the left side. Tap on that and the sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

I would like to do a program that have one string control and one string indicator, any character that I type in the string control in the same time it will be appear in another string (indicator). How can help me?

I would like to do a program that have one string control and one string indicator, any character that I type in the string control in the same time it will be appear in another string (indicator). How can help me?

Why not use an event
Add a While Loop, inside the loop add the Event Sructure.
Now in the event structure selecd the String Controls.value change event to
react
and the new value inside the event that you get,( connect to the String
indicator box.
On Sun, 10 Aug 2003 15:58:47 -0500 (CDT), WiltonFilho wrote:
> I would like to do a program that have one string control and one
> string indicator, any character that I type in the string control in
> the same time it will be appear in another string (indicator). How can
> help me?
>
> I would like to do a program that have one string control and one
> string indicator, any character that I type in the string control in
> the same time it will be appear in another string (indicator). How can
> help me?
>
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/

PAPI WS and Process Webservice in the same BPM process

Hello All -
Can we use PAPI-WS and Process Webservice in the same BPM process?
Here is my plan for usage.
i. Use PAPI-WS for instance creation, workflow details and getting process instances.
ii. Use Process Webservice to execute particular task.
Did any one tried this and / or any idea on this?
BR,
Justin.

Hi,
You can use both interfaces but keep in mind that when exposing a process as a webservice the two activities that you can invoke are the Begin and the Notification Wait.
Regards

GRC AC 5.3 and GRC Process Control on the same server

Similar Messages

Maybe you are looking for