GRC AC 5.3 Logging strategy in multi server nodes
Hello Experts,
We have GRC AC 5.3 SP6 and 5.2 10 landscapes and PRD system are running with multiple server nodes. SAP recomends to use SAP Logger instead of Java Logger in multi server environment, but i am not able to find out complete documentation on this.
Can someone please give pointers on configuring GRC logging in NWA - which all Categories needs to be defined,etc,etc.
And after this configuration, will we be able to see the logs of scheduled jobs with same details as shown in GRC --> Background Job -> View Logs.
Thanks
Davinder
Hello Harleen,
Thanks for your time. Here are my observations
1. When we have created categories and then deinfed Logging and Tracing (with Severity level ALL) in NWA - these entries have also been reflected in Visual Administrator -> Log Configuration.
2. We will have to restart SAP system after changing logging strategy from Java Logger to SAP Logger.
3. After this change and restart, only upcoming new jobs scheduled/run will be displayed in NWA, jobs ran in the past will never be displayed in NWA.
Severe Problems faced when checking logs through NWA:
1. Logs through NWA are not at all readble as one entry is displayed in one row, whereas checking logs in RAR - VIew Logs was very convenient (similar to reading a text file).
Is it possible to customize the display format of log files in NWA to something like text files,etc?
2. When we try to donwload the logs from NWA, server produces huge dumps files of size in GBs (hpfa files which are memory dumps) - and before this download is completed - server crashes after around 15 minutes of starting log downloads - no free space availbale as everything has been taken by these memroy dumps (around 7GB).
Any further pointers on handling GRC AC logs (multiple server nodes) in NWA would be highly appreciated.
Thanks
Davinder
Similar Messages
-
Does GRC AC 5.2 supports multiple server nodes
Hello Experts,
Does GRC AC 5.2 is supported with multiple server nodes.
Thanks
DavinderThanks once again Harleen,
For AC 5.2 i will raise an SAP OSS message and share the results with community.
For AC 5.3, we have configured SAP logger and make neccesary changes in NWA. But log information over here is not as detailed (background job information is missing) as we get in RAR -> Background Jobs ->View Logs.
I have generated another thread for this issue (GRC AC 5.3 Logging strategy in multi server nodes), would appreciate if you can show some light on this issue
Thanks
Davinder -
Multi-Server Monitor log outs repeatedly
I recently installed ColdFusion Enterprise 10 and set up 3 instances on the same server and then set up multi server monitoring for my three instances. The problem is logging into one CF admin on one port logs you out of the other. This appears to be affecting the multiserver monitor as well making it utterly useless. From the overview dashboard you can see the servers logging in and out repeatedly. Is this is a bug or is there something obvious here I'm missing?
I recently installed ColdFusion Enterprise 10 and set up 3 instances on the same server and then set up multi server monitoring for my three instances. The problem is logging into one CF admin on one port logs you out of the other. This appears to be affecting the multiserver monitor as well making it utterly useless. From the overview dashboard you can see the servers logging in and out repeatedly. Is this is a bug or is there something obvious here I'm missing?
-
Com.sapportals.wcm.WcmException:multi-server search failed
Hi Friends,
I am getting the below error when i use search option in portal.
Search Failure
Error during search occurred - com.sapportals.wcm.WcmException: multi-server search failed on some of the servers;error=1999,index=zhsea_helpdesk_doc,location=hsea-pdc-s019:30103;error=1999,index=zhsea_helpdesk_doc,location=hsea-pdc-s019:30103;error=1999,index=zsccc_io_ep,location=hsea-pdc-s019:30103;error=1999,index=zsccc_io_ep,location=hsea-pdc-s019:30103;error=1999,index=zsccc_io_ep,location=hsea-pdc-s019:30103;error=1999,index=zsccc_io_ep,location=hsea-pdc-s019:30103;error=1999,index=zsccc_bpp,location=hsea-pdc-s019:30103;error=1999,index=zsccc_elibrary_fulltext_search,location=hsea-pdc-s019:30103;error=1999,index=zsccc_elibrary_fulltext_search,location=hsea-pdc-s019:30103;error=1999,index=zapcm_user_forum_database,location=hsea-pdc-s019:30103 (Errorcode 2975)
An unexpected severe error occurred during the search call. If the situation persists, inform your system administrator.
I tried to create indexing but it is not happening,If i check TREX logs i found some errors please analyze the problem and advice
[6052] 2009-02-02 21:48:16.325 e TREX_C_STORE CSFile.cpp(00332) : GetDeviceFileName() failed.
[6052] 2009-02-02 21:48:16.325 e TREX_C_STORE CSFile.cpp(00336) : sleeping 10 seconds and trying again...
[6052] 2009-02-02 21:48:26.325 e TREX_C_STORE CSFile.cpp(00717) : open('
ephasapgrp\TXP_SHARE\TXP\index\zsccc_io_ep\en\settings.header',ab) failed with error 106 (last file open failed and handle is not okay), 13 global open files
[6052] 2009-02-02 21:48:26.325 e TREX_C_STORE FileHandle.cpp(00638) : ERROR: checkAndSetVersion(): reading index version from file failed
[6052] 2009-02-02 21:48:26.325 e TrexStore IndexSettings.cpp(00518) : could not read maxtermcounter zsccc_io_epen
[6052] 2009-02-02 21:48:26.325 e TrexStore IndexSettings.cpp(00251) : crashed in CSIndexSettings::open zsccc_io_epen
[6052] 2009-02-02 21:48:26.325 e TrexStore IndexSettings.cpp(00647) : CSIndexSettings not opened zsccc_io_epen
[6052] 2009-02-02 21:48:26.325 e Trex_SE FuzzyExceptions.cpp(00130) : caught ... exception in blobInfo.open() for zsccc_io_epen
[6052] 2009-02-02 21:48:26.325 e SERVER_TRACE DeltaIndexManager.cpp(03987) : search: failed for main index zsccc_io_epen (rc = 1999)
[6052] 2009-02-02 21:48:26.325 e SERVER_TRACE DeltaIndexManager.cpp(03987) : search: failed for main index zsccc_io_epde (rc = 1999)
[6052] 2009-02-02 21:48:26.325 e SERVER_TRACE DeltaIndexManager.cpp(03987) : search: failed for main index zsccc_io_epsh (rc = 1999)
[6052] 2009-02-02 21:48:26.325 e SERVER_TRACE DeltaIndexManager.cpp(03987) : search: failed for main index zsccc_io_epth (rc = 1999)
[6052] 2009-02-02 21:48:26.325 e SERVER_TRACE DeltaIndexManager.cpp(03987) : search: failed for main index zsccc_bppen (rc = 1999)
[6052] 2009-02-02 21:48:26.325 e SERVER_TRACE DeltaIndexManager.cpp(03987) : search: failed for main index zsccc_elibrary_fulltext_searchen (rc = 1999)
[6052] 2009-02-02 21:48:26.325 e SERVER_TRACE DeltaIndexManager.cpp(03987) : search: failed for main index zsccc_elibrary_fulltext_searchth (rc = 1999)
[6052] 2009-02-02 21:48:26.325 e SERVER_TRACE DeltaIndexManager.cpp(03987) : search: failed for main index zapcm_user_forum_databaseen (rc = 1999)
[6052] 2009-02-02 21:48:26.325 e SERVER_TRACE DeltaIndexManager.cpp(03987) : search: failed for main index zhsea_helpdesk_docen (rc = 1999)
[6052] 2009-02-02 21:48:26.325 e SERVER_TRACE DeltaIndexManager.cpp(03987) : search: failed for main index zhsea_helpdesk_docth (rc = 1999)
[5384] 2009-02-02 21:52:12.922 e TREX_C_STORE CSFile.cpp(00741) : GetLastError: 5=Access is denied.
[5384] 2009-02-02 21:52:12.922 e TREX_C_STORE CSFile.cpp(00324) : fopen
ephasapgrp\TXP_SHARE\TXP\index\zsccc_io_ep\en\settings.header (21) failed
[5384] 2009-02-02 21:52:12.922 e TREX_C_STORE CSFile.cpp(00332) : GetDeviceFileName() failed.
[5384] 2009-02-02 21:52:12.922 e TREX_C_STORE CSFile.cpp(00336) : sleeping 10 seconds and trying again...
[5384] 2009-02-02 21:52:22.922 e TREX_C_STORE CSFile.cpp(00741) : GetLastError: 5=Access is denied.
[5384] 2009-02-02 21:52:22.922 e TREX_C_STORE CSFile.cpp(00324) : fopen
ephasapgrp\TXP_SHARE\TXP\index\zsccc_io_ep\en\settings.header (21) failed
[5384] 2009-02-02 21:52:22.922 e TREX_C_STORE CSFile.cpp(00332) : GetDeviceFileName() failed.
[5384] 2009-02-02 21:52:22.922 e TREX_C_STORE CSFile.cpp(00336) : sleeping 10 seconds and trying again...
[5384] 2009-02-02 21:52:32.922 e TREX_C_STORE CSFile.cpp(00741) : GetLastError: 5=Access is denied.
[5384] 2009-02-02 21:52:32.922 e TREX_C_STORE CSFile.cpp(00324) : fopen
ephasapgrp\TXP_SHARE\TXP\index\zsccc_io_ep\en\settings.header (21) failed
[5384] 2009-02-02 21:52:32.922 e TREX_C_STORE CSFile.cpp(00332) : GetDeviceFileName() failed.
[5384] 2009-02-02 21:52:32.922 e TREX_C_STORE CSFile.cpp(00336) : sleeping 10 seconds and trying again...
[5384] 2009-02-02 21:52:42.922 e TREX_C_STORE CSFile.cpp(00741) : GetLastError: 5=Access is denied.
[5384] 2009-02-02 21:52:42.922 e TREX_C_STORE CSFile.cpp(00324) : fopen
ephasapgrp\TXP_SHARE\TXP\index\zsccc_io_ep\en\settings.header (21) failed
[5384] 2009-02-02 21:52:42.922 e TREX_C_STORE CSFile.cpp(00332) : GetDeviceFileName() failed.
[5384] 2009-02-02 21:52:42.922 e TREX_C_STORE CSFile.cpp(00336) : sleeping 10 seconds and trying again...
[5384] 2009-02-02 21:52:52.922 e TREX_C_STORE CSFile.cpp(00741) : GetLastError: 5=Access is denied.
[5384] 2009-02-02 21:52:52.922 e TREX_C_STORE CSFile.cpp(00324) : fopen
ephasapgrp\TXP_SHARE\TXP\index\zsccc_io_ep\en\settings.header (21) failed
[5384] 2009-02-02 21:52:52.922 e TREX_C_STORE CSFile.cpp(00332) : GetDeviceFileName() failed.
[5384] 2009-02-02 21:52:52.922 e TREX_C_STORE CSFile.cpp(00336) : sleeping 10 seconds and trying again...
[5384] 2009-02-02 21:53:02.923 e TREX_C_STORE CSFile.cpp(00741) : GetLastError: 5=Access is denied.
[5384] 2009-02-02 21:53:02.923 e TREX_C_STORE CSFile.cpp(00324) : fopen
ephasapgrp\TXP_SHARE\TXP\index\zsccc_io_ep\en\settings.header (21) failed
[5384] 2009-02-02 21:53:02.923 e TREX_C_STORE CSFile.cpp(00332) : GetDeviceFileName() failed.
[5384] 2009-02-02 21:53:02.923 e TREX_C_STORE CSFile.cpp(00336) : sleeping 10 seconds and trying again...
[5384] 2009-02-02 21:53:12.923 e TREX_C_STORE CSFile.cpp(00717) : open('
ephasapgrp\TXP_SHARE\TXP\index\zsccc_io_ep\en\settings.header',ab) failed with error 106 (last file open failed and handle is not okay), 13 global open files
[5384] 2009-02-02 21:53:12.923 e TREX_C_STORE FileHandle.cpp(00638) : ERROR: checkAndSetVersion(): reading index version from file failed
[5384] 2009-02-02 21:53:12.923 e TrexStore IndexSettings.cpp(00518) : could not read maxtermcounter zsccc_io_epen
[5384] 2009-02-02 21:53:12.923 e TrexStore IndexSettings.cpp(00251) : crashed in CSIndexSettings::open zsccc_io_epen
[5384] 2009-02-02 21:53:12.923 e TrexStore IndexSettings.cpp(00647) : CSIndexSettings not opened zsccc_io_epen
[5384] 2009-02-02 21:53:12.923 e Trex_SE FuzzyExceptions.cpp(00130) : caught ... exception in blobInfo.open() for zsccc_io_epen
[5384] 2009-02-02 21:53:12.923 e SERVER_TRACE DeltaIndexManager.cpp(03987) : search: failed for main index zsccc_io_epen (rc = 1999)
[5384] 2009-02-02 21:53:12.923 e SERVER_TRACE DeltaIndexManager.cpp(03987) : search: failed for main index zsccc_io_epde (rc = 1999)
[5384] 2009-02-02 21:53:12.923 e SERVER_TRACE DeltaIndexManager.cpp(03987) : search: failed for main index zsccc_io_epsh (rc = 1999)
[5384] 2009-02-02 21:53:12.923 e SERVER_TRACE DeltaIndexManager.cpp(03987) : search: failed for main index zsccc_io_epth (rc = 1999)
[5384] 2009-02-02 21:53:12.923 e SERVER_TRACE DeltaIndexManager.cpp(03987) : search: failed for main index zsccc_bppen (rc = 1999)
[5384] 2009-02-02 21:53:12.923 e SERVER_TRACE DeltaIndexManager.cpp(03987) : search: failed for main index zsccc_elibrary_fulltext_searchen (rc = 1999)
[5384] 2009-02-02 21:53:12.923 e SERVER_TRACE DeltaIndexManager.cpp(03987) : search: failed for main index zsccc_elibrary_fulltext_searchth (rc = 1999)
[5384] 2009-02-02 21:53:12.923 e SERVER_TRACE DeltaIndexManager.cpp(03987) : search: failed for main index zapcm_user_forum_databaseen (rc = 1999)
[5384] 2009-02-02 21:53:12.923 e SERVER_TRACE DeltaIndexManager.cpp(03987) : search: failed for main index zhsea_helpdesk_docen (rc = 1999)
[5384] 2009-02-02 21:53:12.923 e SERVER_TRACE DeltaIndexManager.cpp(03987) : search: failed for main index zhsea_helpdesk_docth (rc = 1999)
[2528] 2009-02-02 22:05:02.666 e SERVER_TRACE TRexApiIndexDocuments.cpp(02494) : indexLocal zsccc_elibrary_fulltext_search: <zsccc_elibrary_fulltext_search> is already prepared (3=TPCS_PREPARED). Index call not allowed!
Kind Regards
SudhakarI know this is an old thread, but in my case the problem was solved after i patched the TREX 7.10 revision 40 to revision 50...
Cheers Michael -
Sessions in a multi-server env...
Hi guys, I have a question concerning sessions in a multi-server environment...
The scenario is this-- There is hardware-based load balancer distributing across two or more webservers, which tie into a central database...
My question is, what is the accepted way to propogate sessions from one webserver to the next? What I mean is, if the user hits webserver A and starts a session and the next request happens to get routed to webserver B, how can webserver B access the session that was started on webserver A?
The immediate application of this would be to keep a user "logged in" or shopping cart ability.
I have a few ideas but would like to hear yours before I taint the discussion :)
I'm very sorry if this has been discussed before, but I did search and did not find what I was looking for (searching for "Session" isnt very helpful...)
Thanks a bunch!The big application servers from ATG, BEA and IBM handles this in roughly the same way.
You have several app.server instances handling user requests. In front of these you have an app.server instance in "load balancer mode" which dispatches incoming requests in ongiong sessions to the app. server instance the session is located on, and dispatches requests for new sessions to the least busy app. server.
This is all fine until one of the app. servers breaks down, is taken offline for maintenance or suffers network or hardware failure. The better application servers are capable of making the sessions that ran on the downed app. server instance move to another app. server instance. To facilitate this, the content of all sessions are constantly being mirrored to another app. server than the one handling the session. This is done by means of serialization. In this way sessions can continue running uninterupted even if the app. server that handled them goes down with no warning.
It's facilities like this that makes it worthwhile to pay the premium prices for ATG Dynamo, BEA WebLogic and IBM WebSphere over application servers like tomcat.
One of the niftier setups I have seen was made with four SUN boxes in as many countries, each running a localized version of a news service website. These servers acted as session mirrors for each other, So whenever one of the national servers went down, the traffic and the live sessions were moved to one of the other servers. -
Setting up Multi server environment in Sql Server 2012 - Enlist Failed Error
I am trying to Configure the Master target server / Multi server environment in Sql Server 2012.
I changed :
- `MSXENCryptChannnelOptions`-->Changed from 2 to 0
- `AllowDownloadedJobsToMatchProxyName` - changed from 0 to 1 on the target
When I run the wizard I am getting below error
>MSX Enlist failed for Job Server 'MasterServerName'
>The enlist operation Failed(Reason:SQL Server Agent Error: Unable to connect to MSX 'MasterServerName'(Microsoft Sql Server, Error : 22026)
They both servers SQL Agents are running on the same windows service account.
Any Suggestions on how to fix this?
**Adding the Log:**
Enlist TSX Progress
- Create MSXOperator (Success)
Checking for an existing MSXOperator.
Updating existing MSXOperator.
Successfully updated MSXOperator.
- Make sure the Agent service for 'Test3' is running (Success)
The service 'SQLSERVERAGENT' is running.
- Ensure the agent startup account for 'Test4' has rights to login as a target server (Success)
Checking to see if the startup account for 'Test4' already exists.
Login exists on server.
Checking to see if login has rights to msdb.
Login has rights to msdb.
Checking to see if user is a member of the TargetServersRole.
User is a member of the TargetServersRole.
- Enlist 'Test4' into 'Test3' (Error)
Enlisting target server 'Test4' with master server 'Test3'.
Using new enlistment method.
Messages
MSX enlist failed for JobServer 'Test4'. (Microsoft.SqlServer.Smo)
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
The enlist operation failed (reason: SQLServerAgent Error: Unable to connect to MSX 'TEST3'.) (Microsoft SQL Server, Error: 22026)hi SmilingLily,
you can try to run the SQL Agent under a domain account. -
Multi server data retrieval performance
Hi experts,
I have a question regarding the data retrieval performance (EVDRE) on a multi server installation environment on Microsoft SQL Server 2008.
We have succesfully migrated Outlooksoft 4.2 SP03 to SAP BPC 7.0 SP07 for a customer. During this project we have also set up a complete new server environment consisting of:
Development server: dedicated single server, Windows 2003 Standard SP2 32 bit, SQL Server 2008 SP1 with cumulative update package 6, SAP BPC 7.0 SP07, 2 quad core processors, 4 GB RAM
QA server: dedicated multi servers - 1 database server (SQL/OLAP), Windows 2003 Standard SP2 64 bit, SQL Server 2008 SP1 with cumulative update package 6, 2 quad core processors, 32 GB RAM - 1 dedicated application/web server, Windows 2003 Standard SP2 32 bit, SQL Server 2008 SP1 with cumulative update package 6 (shared components / reporting services), SAP BPC 7.0 SP07, 2 quad core processors, 4 GB RAM
Production server: dedicated multi servers - 1 database server (SQL/OLAP/Reporting services), Windows 2003 Standard SP2 64 bit, SQL Server 2008 SP1 with cumulative update package 6, 2 quad core processors, 32 GB RAM - 2 dedicated application/web server, Windows 2003 Standard SP2 32 bit, SQL Server 2008 SP1 with cumulative update package 6 (shared components), SAP BPC 7.0 SP07, 2 quad core processors, 4 GB RAM
Furthermore, two terminal servers with the SAP BPC client.
All servers have good performancve and we have great times on cube processing and SQL processing. However, to our great surprise we find that the single development server is much faster with a single user to retrieve data using EVDRE than the multi-server environment. About 2x as fast. A reporting book with more then 10 sheets and about 25 EVDRE's takes about 42 seconds on the development server and 93 seconds on the multi server.
It seems that EVDRE is taking up a lot of time to communicate between the application server and the database server in a multi server environment while being much faster on a single server. This is not what we want :-). The network speed in the domain consist of all 1 GB lines so that should not be the issue.
Do you have any experience with this? How can we upgrade the speed of the multi server, are there specific settings?
Hope the get some useful answers. Thanks in advance.
Damien
Edited by: DWiegman on Feb 20, 2010 4:15 PMHi,
You have to activate also the EVDRE logs on the client and server level, just to understand from where is coming the problem (appserver-db comuncication or client-appserver communication). You have to check also if there is any proxy firewall between client and application server.
In case you are using NLB, please verify if afinity is setup to true.
The performance problems can be come from db level. Did you verify how many records do you have into WB table for the specific application? Are you keeping the DB in full mode? How big is the log of the databse?
The are a lot of things that can have impact of this, but it looks to be a setup problem.
Hope this can help you,
Mihaela -
Workflow Custom Activity deploy in multi server environment
I have been working on a project that involves developing a custom workflow activity for SharePoint 2013. I am developing it in a single server environment working with http.
My problem occurs when deploying to multi-server environment with https (WFE, APP). My question is how to deploy my solution to the new environment.
The steps:
Create a project - c# activity library
Add a workflow activity, add .xml
Deploy the .dll and .xml of project to:
"C:\Program Files\Workflow%20Manager\1.0\Workflow\Artifacts" "C:\Program Files\Workflow Manager\1.0\Workflow\WFWebRoot\bin"
net sotp "Workflow Manager Backend"
net start "Workflow Manager Backend"
Deploy .DLL to GAC
- Created MSI using install shield in VS2010 to add .DLL to GAC
- Verify .DLL in GAC by going to c:\windows\assembly and %windir%\Microsoft.NET\assembly
iisrest
Deploy WSP to SharePoint, activate feature, open SharePoint Designer 2013 and choose the custom action that now appears when creating a 2013 workflow
To recap we have workflow manager on the APP server and and the workflow client on the WFE. We deployed the .DLL and .XML to the workflow manager (APP) only. The .DLL is deployed
to/in the GAC on the WFE and the APP. We are able to see and create the activity in Designer 2013 and we deploy the workflow to a normal SharePoint list. When we run the workflow we do not get any errors in the ULS logs, event viewer or Workflow Manager Debug
Logs (event viewer also). The site is not created though. We believe the issue is that the custom C# (.DLL) is not being ran.
This all works fine and dandy on my single server environment. Workflow is working like a charm. How can we trouble shoot what the issue is if we are not finding any errors?
Is there a step that we missed or some other place we need to look for logs? Would the ULS logs show the site creation or show running our custom code? Currently it does not show anything when we run the workflow.
Let me know if this is unclear or if anyone needs more information. ThanksHi,
Here is a workaround for your reference:
We can develop a custom WCF service instead of the Custom Activity in SharePoint. And then use the service from workflow. It use a separate dedicated server for workflow without having any reference to SharePoint DLLs from inside workflow.
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/systemcenter/en-US/d462ca07-9861-4133-948a-fc9771306cb1/custom-workflow-how-to-go-from-single-server-to-multiple?forum=sharepointdevelopment
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support -
Hello gurus,
I am confused, about the backup system i should go for(backup device, abckup software)?? Fllowing is my SAP Landscape.
1) IDES
2) Solution manager
3) Development
4) BIW
no of users 25 max
modules implemented
MM
HR
FICO
BIW
<b> I want to implemente before go live, backup system in my company.</b>
We have received backup schedule from our implementation partner. Our backup system is as follows.
Backup device is HP Surestore Autoloader.
Cartridge capacity is 100/200GB
Backup software is Veritas (version 8.6)
Note: Through this we take backup of our legacy system and it takes around 3 1/2 hour to 4 hours to take backup of 60 GB of our legacy data.
Right now the problem is our backup software version is old and i even believe, the hardware we have is not sufficient to take daily database backup and fortnightly, SAP system backup.
The only solution to the problem i can see is
1) to go for another backup device exclusively for SAP system
2) Even go for SQL Agent software used to take backup of SAP system thorugh Veritas.
3) Even upgrade my Veritas version.
<b> Its a request to GURUS</b>
1) Is the solution, i am thinking to this issue is correct.?? If no then please advice me
2) Please tell me the best backup system in your opinion for my above mentioned system.
Thanks Gurus
RahulHello,
A indication of the size of each database would be helpful.
However, its NOT a good idea to take only one on line backup a week. What if you have a tape error and cant recover a TL? You have no chance for recovery. This is not best practice. Can the business except a 4,5 or even 6 days loss of data - id guess not.
This is what id do if you don't want to purchase a new device, I would take an online backups from SQL to disk every night - this would be a separate disk! From the disk you can the pick up the backup to take at a time to suit that wont impact the existing backup. Plus you always have two copies of the backup. One on disk, one on tape.
My normal transaction log strategy is similar, again backup to disk, every hour on a production system. Then after midnight move the existing 24 logs into an archive folder. This folder would also be picked up by the existing device at a suitable time before being moved to a 'saved' folder and deleted the next day. Again you always have multiple copies of the data. two on disk, two on tape. -
LMS 4.0 Multi-Server setup
I have a problem setting up a multi-server setup. On my remote LMS/slave servers, I can import the Peer Certificate from my master LMS server and on the slave servers I can import the Master server cert. However, when I go to the Single Sign-On of the slave server it states that the cert is not installed/valid. So, I go back to the Peer Server Certificate setup and look at the cert imported and states it is valid. All self signed certificates.
Question: Should I make new self signed certs for each server? Or/How do I make new cert within LMS(I believe in the setup you added the values)? Is there a log in LMS that I can check this process?
From reading the docs, I don't see anything. Any insight would be greatly appreciated.
thanks,
JohnThere is a perl script, sslutil.pl, in your LMS installation (under $nmsroot\MDC\Apache) that will allow you to validate your server's certificate. Assuming a default installation on Windows, you can use:
"C:\Program Files (x86)\CSCOpx\bin\perl.exe" "C:\Program Files (x86)\CSCOpx\MDC\Apache\sslutil.pl"
from a command window
My experience (using 3rd party signed certifcates) is that LMS is very particular abou the ownership (casuser needs to own) of the file and directory in which the certificate and key files are stored. -
Starting ColdFusion Multi-Server Instances - Correct Method
Can someone please provide me with the correct method of starting multi-server instances of ColdFusion from the command line?
I have been using:
/<jrun4 home>/bin/jrun -nohup -start cfusion (for the cfusion instance)
/<jrun4 home>/bin/jrun -nohup -start <coldfusion instance 2> (for a second instance of coldfusion)
etc.
I see however that when the second instance of coldfusion (<coldfusion instance 2>) is started from the ColdFusion Administrator (Enterprise Manager - Instance Manager), it appears as the following:
/<jrun4 home>/bin/jrun -nohup -start -childVM <coldfusion instance 2>
What is the purpose of the -childVM switch that appears to be used when starting the instance from the ColdFusion Administrator (Enterprise Manager - Instance Manager)? Should it be used when manually starting the instance from the command line?
Is there an online reference for the jrun swithces to be used when starting ColdFusion instances? I have not been able to find any.
Thank you in advance for your assistance.This is one are were you won't find too many good docs on.
I have two servers running CentOS in a cluster, with each server running two CF 8.1 servers in a cluster on each server. So I have 4 CF prod servers.
The problem you will find is that the admin server interface can stop/start a service, but it uses the same jvm.config file as with thich the admin server was started. I have searched a lot, but couldn't find a solution to start the servers from the admin console. So I start them vir the "service" option on the OS level.
So I build a script were I can start each server with its own jvm.config file. Madness to allocate 1Gig of mem for the admin server just so that the other servers can get 1Gig as well.
Here is my startup script:
[root@clu1 logs]# cat /etc/init.d/coldfusion8multi
#!/bin/sh
# chkconfig: 345 90 14
# description: starts the MultiServer cfusion instance
if [ -f /etc/rc.common ]; then
. /etc/rc.common
fi
# Start ColdFusion 8 Multiserver
# Because this is a start up script, and will be run by root, we use a specific
# user (the user who installed) to run ColdFusion
CF_DIR="/opt/cfusion/clu1_man"
RUNTIME_USER=""cfusion""
su $RUNTIME_USER -c "$CF_DIR/bin/jrun -start cfusion >& $CF_DIR/logs/cfusion-event.log &"
su $RUNTIME_USER -c "$CF_DIR/bin/jrun -config $CF_DIR/bin/jvm.config_clu1 -start clu1_01 >& $CF_DIR/logs/cfusion-event.log &"
su $RUNTIME_USER -c "$CF_DIR/bin/jrun -config $CF_DIR/bin/jvm.config_clu2 -start clu1_02 >& $CF_DIR/logs/cfusion-event.log &"
Hope it helps a bit. -
Log on to remote server and start database -error while installing CI in HA
Hello All,
We are installing ECC 6.0 with High Availability using HP-UX. We have completed installation in ASCS and Database Instance. Now when were trying to install in Central Instance, we encountered an error at Start Instance which informed us to Log on to remote server and start database. However the database is already running in DB node. Please find the log below.
TRACE 2011-06-10 16:31:45.825 [syuxctask.cpp:1382]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 25742
INFO 2011-06-10 16:31:45.835
CJSlibModule::writeInfo_impl()
Output of /usr/sap/PE2/SYS/exe/run/startsap all DVEBMGS01 DBMCI001 is written to the logfile start_PE2_DVEBMGS01.log.
WARNING 2011-06-10 16:31:46.345
CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/PE2/SYS/exe/run/startsap all DVEBMGS01 DBMCI001" finished with return code 6. Output:
Database PE2 must be started on remote server
Log on to remote server and start database
WARNING[E] 2011-06-10 16:31:46.355
CJSlibModule::writeError_impl()
CJS-20022 Could not start instance 'DVEBMGS01' of SAP system PE2.
TRACE 2011-06-10 16:31:46.355 [iaxxejsbas.hpp:408]
handleException<ESAPinstJSError>()
Converting exception into JS Exception EJSException.
TRACE 2011-06-10 16:31:46.355
Function setMessageIdOfExceptionMessage: ind-rel.ind-os.ind-db.webas.startInstanceFailed
WARNING[E] 2011-06-10 16:31:46.355
CJSlibModule::writeError_impl()
CJS-20022 Could not start instance 'DVEBMGS01' of SAP system PE2.
TRACE 2011-06-10 16:31:46.355 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
TRACE 2011-06-10 16:31:46.405 [syuxctask.cpp:1382]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 25793
ERROR 2011-06-10 16:31:46.525 [sixxcstepexecute.cpp:950]
FCO-00011 The step start with step key |NW_ABAP_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|10|0|NW_CI_Instance_Start|ind|ind|ind|ind|2|0|start was executed with status ERROR .
TRACE 2011-06-10 16:31:46.555 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > SAP Application Server ABAP > Oracle > High-Availability System > Central Instance . You can now: </p> <ul> <li> Choose <i>Retry</i> to repeat the current step. </li> <li> Choose <i>View Log</i> to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> <p> Log files are written to /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/HA/CI. </p> </body></html>
TRACE 2011-06-10 16:31:46.555 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Kindly let us know how to rectify the error and prroceed further with the instalaltion.
Thanks
RishiDear Guys,
we didnt change the date and time but i m very sure it is same trans.log file.
for your kind information please note SID and Nodes details
Sid (PE2)
DB Node : DBMDB001
CI Node : DBMCI001
also i am attaching starting part of the file.
4 ETW000 R3trans version 6.14 (release 701 - 26.01.09 - 12:46:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 07.11.2010 - 03:44:06
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Sun Nov 7 03:44:06 2010 295 0.000295
4 ETW000 [dev trc ,00000] db_con_init called 22 0.000317
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 116 0.000433
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/PC1/SYS/exe/run/dboraslib.so' ...
4 ETW000 64 0.000497
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/PC1/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000 32161 0.032658
4 ETW000 [dev trc ,00000] Library '/usr/sap/PC1/SYS/exe/run/dboraslib.so' loaded
4 ETW000 39 0.032697
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 111 0.032808
4 ETW000 [dev trc ,00000] Version of '/usr/sap/PC1/SYS/exe/run/dboraslib.so' is "700.08",
patchlevel (0.25)
4 ETW000 265 0.033073
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 41 0.033114
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 82 0.033196
4 ETW000 [dev trc ,00000] New connection 0 created 52 0.033248
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES,
reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 41 0.033289
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 84 0.033373
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 31 0.033404
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES,
reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 37 0.033441
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.4.0' 601 0.034042
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 25 0.034067
4 ETW000 [dev trc ,00000] Client character set UTF16 -> UTF8 35674 0.069741
4 ETW000 [dev trc ,00000] Client NLS setting (OCINlsGetInfo): 'AMERICAN_AMERICA.UTF8'
4 ETW000 57 0.069798
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 55 0.069853
4 ETW000 [dev trc ,00000] Connecting as /@PC1 on connection 0 (nls_hdl 0) ... (dbsl 700
151208)
4 ETW000 34 0.069887
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 52 0.069939
4 ETW000 [dev trc ,00000] 0 UTF8 0
0x6000000001052910 0x600000000105a3c0 0x600000000106ab38
4 ETW000 58 0.069997
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 40 0.070037
4 ETW000 [dev trc ,00000] Allocating server context handle 27 0.070064
4 ETW000 [dev trc ,00000] Attaching to DB Server PC1
(con_hdl=0,svchp=0x600000000106aa68,srvhp=0x600000000106de78)
4 ETW000 63 0.070127
4 ETW000 [dev trc ,00000] Assigning server context 0x600000000106de78 to service context
0x600000000106aa68
4 ETW000 60612 0.130739
4 ETW000 [dev trc ,00000] Allocating user session handle 97 0.130836
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0,
usr='/',svchp=0x600000000106aa68, srvhp=0x600000000106de78, usrhp=0x60000000010fc940)
4 ETW000 64 0.130900
4 ETW000 [dev trc ,00000] Assigning user session 0x60000000010fc940 to service context
0x600000000106aa68
4 ETW000 9302 0.140202
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=53, stmth_p=0x6000000001077608)
4 ETW000 198 0.140400
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_MODULE(:A0,:A1); END;
4 ETW000 38 0.140438
4 ETW000 [dev trc ,00000] CbApplInfoGet() failed! Ignore, but uninstall callback to avoid more
erroneous calls
4 ETW000 291 0.140729
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=54, stmth_p=0x6000000001078660)
4 ETW000 33 0.140762
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;
4 ETW000 35 0.140797
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 937 0.141734
4 ETW000 [dev trc ,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 36 0.141770
4 ETW000 [dev trc ,00000] Connected to session 297. 639 0.142409
4 ETW000 [dev trc ,00000] Now '/@PC1' is connected: con_hdl=0, nls_hdl=0, session_id=297.
4 ETW000 38 0.142447
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 37 0.142484
4 ETW000 [dev trc ,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 36 0.142520
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 327 0.142847
4 ETW000 [dev trc ,00000] SELECT USERID, PASSWD FROM SAPUSER WHERE USERID IN (:A0, :A1)
4 ETW000 36 0.142883
4 ETW000 [dev trc ,00000] Got SAPSR3's password from OPS$-user 728 0.143611
4 ETW000 [dev trc ,00000] Disconnecting from connection 0 ... 38 0.143649
4 ETW000 [dev trc ,00000] Rolling back transaction ... 31 0.143680
4 ETW000 [dev trc ,00000] Closing user session
(con_hdl=0,svchp=0x600000000106aa68,usrhp=0x60000000010fc940)
4 ETW000 210 0.143890
4 ETW000 [dev trc ,00000] Now I'm disconnected from ORACLE 721 0.144611
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@PC1 on connection 0 (nls_hdl 0) ... (dbsl
700 151208)
4 ETW000 40 0.144651
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 37 0.144688
4 ETW000 [dev trc ,00000] 0 UTF8 0
0x6000000001052910 0x600000000105a3c0 0x600000000106ab38
4 ETW000 37 0.144725
4 ETW000 [dev trc ,00000] Assigning username to user session: con_hdl=0,
usrhp=0x60000000010fc940
4 ETW000 35 0.144760
4 ETW000 [dev trc ,00000] Assigning password to user session: con_hdl=0,
usrhp=0x60000000010fc940
4 ETW000 40 0.144800
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0, usr=SAPSR3/<pwd>,
svchp=0x600000000106aa68, srvhp=0x600000000106de78, usrhp=0x60000000010fc940)
4 ETW000 337 0.145137
4 ETW000 [dev trc ,00000] Assigning user session 0x60000000010fc940 to service context
0x600000000106aa68
4 ETW000 4085 0.149222
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=54, stmth_p=0x6000000001077608)
4 ETW000 63 0.149285
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;
4 ETW000 37 0.149322
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 585 0.149907
4 ETW000 [dev trc ,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 36 0.149943
4 ETW000 [dev trc ,00000] Connected to session 297. 350 0.150293
4 ETW000 [dev trc ,00000] Now 'SAPSR3/<pwd>@PC1' is connected: con_hdl=0, nls_hdl=0,
session_id=297.
4 ETW000 38 0.150331
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 38 0.150369
4 ETW000 [dev trc ,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 34 0.150403
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 294 0.150697
4 ETW000 [dev trc ,00000] SELECT VALUE FROM V$NLS_PARAMETERS WHERE PARAMETER IN
('NLS_LANGUAGE', 'NLS_TERRITORY', 'NLS_CHARACTERSET') ORDER BY PARAM
4 ETW000 66 0.150763
4 ETW000 [dev trc ,00000] ETER
4 ETW000 34 0.150797
4 ETW000 [dev trc ,00000] Database NLS settings: AMERICAN_AMERICA.UTF8 329 0.151126
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 856 0.151982
4 ETW000 [dev trc ,00000] SELECT UPPER(INSTANCE_NAME),HOST_NAME,VERSION,TO_CHAR
(STARTUP_TIME,'MON DD, YYYY, HH24:MI:SS') FROM V$INSTANCE
4 ETW000 36 0.152018
4 ETW000 [dev trc ,00000] DB instance PC1 is running on scmdb001 with ORACLE version
10.2.0.4.0 since NOV 07, 2010, 03:23:10
4 ETW000 349 0.152367
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 38 0.152405
4 ETW000 [dev trc ,00000] SELECT SUBSTR(NAME,1,3), TO_CHAR(CREATED,'YYYYMMDDHHMMSS')
FROM V$DATABASE -
No SMTP log after upgrade to Server 4.0.3
I just updated my server to 4.0.3 and I initially had an error message saying that a script was not owned by postfix repeated in the SMTP log file.
First I tried to fix it with disk utility but it didn't work.
So in Terminal I did: sudo chown _postfix /Library/Server/Mail/Data/mta/./guid_device_maps.plist
Now I have no SMTP log showing in the server menu any ideas on how to get it back is very welcome.
Kind regards
PeterOkay I reinstalled the Server from App Store and we're back to square one with the message:
postfix/postfix-script[2941]: warning: not owned by _postfix: /Library/Server/Mail/Data/mta/./guid_device_maps.plist
However, http://topicdesk.com/faqs/os-x-server-mail-services-faq/166-what-is-virtual-mail -hosting-or-are-virtual-mail-domains say the message doesn't matter.
So I apologise for the false alarm.
Kind regards
Peter -
MAXDB copy log file from one server to the other server.
Hi All,
I want to copy a log file from one server to the other server , the database is Maxdb and i don't know how to do it. I want to do it through command prompt, (set of commands required) the front end tool which we are using is DBM ( database manager). Please help.
Regards
M.AHi,
Basically, the process is of log shipping. Transferring logs from DC to DR system.
For that, you can check HowTo - Standby DB log shipping - MaxDB - SCN Wiki
This is script based. I have not done it but the idea remains the same.
Regards,
Divyanshu -
User gets "This network connection does not exist" when she tryes to log on to Terminal Server (2008 R2)
I got more than 100 users. Shes the only one getting is. We tried four computers (All Windows 7 Pro)
Nothing useful in event viewer to mention.Hi,
Thank you for posting in Windows Server Forum.
Does that user able to login previously?
From your comment, it seems that there is some permission issue with that user. As you have checked that user with different system also. Please check that user is added under “Remote Desktop User” local group and also allowed “Allow log on through
Remote Desktop service” permission under group policy. Also please check that when user tries to login it uses “Domainname\Username” format.
In addition for a try, also check by disabling firewall on one particular system.
To add users and groups to the Remote Desktop Users group by using Local Users and Groups snap-in:
1. Click Start > Administrative Tools, Open Computer Management.
2. In the console tree, click the Local Users and Groups node.
3. In the details pane, double-click the Groups folder.
4. Double-click Remote Desktop Users, and then click
Add.
5. In the Select Users dialog box, click Locations to specify the search location.
6. Click Object Types to specify the types of objects you want to search for.
7. Type the name you want to add in the Enter the object names to select (examples) box.
8. Click Check Names.
When the name is located, click OK.
More information:
Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
http://support.microsoft.com/kb/2477176/en-us
Hope it helps!
Thanks,
Dharmesh
Maybe you are looking for
-
Can no longer connect to WiFi popup does not appear
I have a iPad gen 4 and a iPhone 5s and neither will connect to my business Wi-Fi. The issue is that I can log in and then the login process requires me to okay the request. The pop-up to okay never appears. This stopped working when I upgraded my iP
-
am encountered with a problem update was terminated recived from the author while saving data in project system (during saving of activity in the wbse).can any one suggest me how to remove the same error.
-
Hi, I have just installed NW04 ABAP + J2EE addon using the following method. 1) Install Was 6.40 Abap 2) License the system 3) Install J2EE 6.40 add-on for Abap 4) Applied stack 9 for Abap 5) Applied stack 9 for J2EE The ABAP engine is licensed corre
-
What happens if you install 800 MHZ Dram in a n IMac that originally had 667MHZ installed?
What happens if you install 800 MHZ Dram in a n IMac that originally had 667MHZ installed?
-
hi, i got requirement for ME51N transaction for G145 n G146 document type the amount GSWRT should not exceed more then 100000. i have done this by mereq001 enhancement and did it . it is working for every line item. But the problem is for perticular