GRC AC 5.3 - Sync Mode background job running for days.

We have the following performance issues on the GRC System.
1- Please note that the sync mode background job has been running for DAYS.
My question is if I truncate table virsa_cc_prmvl; (which stores all the analysis results), will my GRC system be effected.
2- Secondly we have a job analysing roles, which causes the performance to go down. And due to we have a extremely high number of roles, we would like to know if there would be a way to improve the analysis for roles. Is there any parameter modification in GRC / J2EE/ backend related to roles?
Details of our roles:
- we have more than 60000 roles in our system
- 75 % of the roles are not assigned to any user (is there a way to avoid these roles? these roles are not put in order so too tedious to choose roles individually or by range.
3- We are running a job with four risks and it's taking more than two minutes per user (we've got 10.000 + users in total)
How can I resolve this performance issue.
4- What is the recommended size of the batch for user sincronization. Should I use 1000 or 10,000 (based on our above environment).
Thanks,
Haleem

Hello, Abdul!
How you have solved a problem?
Thank you a lot.
Best regards,
Denis Gaykov

Similar Messages

Background job running for a long time - trace is not capturing.

hi guys,
My background job runs for more thatn 4 hours. some times. (normally it completes withing one hour)
i tried to trace using st12 ....and executed this program. but not got complete trace report of 4 hours.
what is the best way to trace long running programs like this.
is there any alternative for this...???
regards
girish

Giri,
There is no need to trace a program for the full 4 hours. There is usually just one piece of rogue code causing the problem, and it can be identified quite quickly.
If I were you I would just watch the job run via SM50, to see if it lingers on any database tables. Also check if the memory is filling up - this is the sign of a memory leak.
You can also try stopping the program (via SM50 debugging) at random points, to see what piece of code it is stuck in.
The issue should reveal itself fairly quickly.
Tell us what you find!
cheers
Paul

Background Jobs running for long time.

Dear All,
I had done the Homogeneous System Copy on my ECC 6 QA System successfully by restoring the offline backup of Production system. My system is up & running but I have some Performace issues in the system. I also observed that some jobs are running since long time & most commonly i got the below line in the BGD Trace "WP has reached abap/heaplimit = 40000000 bytes".
I search for the notes but couldn't find anything.
Please help me to resolve this issue.
Below is the Trace :-
trc file: "dev_w7", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
M sysno      12
M sid        UBQ
M systemid   370 (Solaris on SPARCV9 CPU)
M relno      7000
M patchlevel 0
M patchno    52
M intno      20050900
M make:      single threaded, Unicode, 64 bit, optimized
M pid        16335
M
M
M Mon Nov 10 19:01:10 2008
M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
M length of sys_adm_ext is 572 bytes
M ThInit: running on host UBSQAS
M calling db_connect ...
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@UBQ on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1 0x1067f1be0 0x1067f96a0 0x106809e38
C Attaching to DB Server UBQ (con_hdl=0,svchp=0x106809d68,svrhp=0x10680c0b8)
C Starting user session (con_hdl=0,svchp=0x106809d68,srvhp=0x10680c0b8,usrhp=0x1067f9eb8)
C Now '/@UBQ' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0x106809d68,usrhp=0x1067f9eb8)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@UBQ on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1 0x1067f1be0 0x1067f96a0 0x106809e38
C Starting user session (con_hdl=0,svchp=0x106809d68,srvhp=0x10680c0b8,usrhp=0x1067f9eb8)
C Now 'SAPSR3/<pwd>@UBQ' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance UBQ is running on UBSQAS with ORACLE version 10.2.0.2.0 since 20081109
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20081110 190110 UBSQAS
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip
I MtxInit: 7 0 0
M SHM_PRES_BUF###(addr: 0xffffffff6c400000, size: 4400000)
M SHM_ROLL_AREA##(addr: 0xfffffffe56000000, size: 134217728)
M SHM_PAGING_AREA##(addr: 0xfffffffe50000000, size: 67108864)
M SHM_ROLL_ADM###(addr: 0xffffffff7000a000, size: 2672386)
M SHM_PAGING_ADM##(addr: 0xffffffff77a00000, size: 656416)
M ThCreateNoBuffer##allocated 572152 bytes for 1000 entries at 0xfffffffe48004000
M ThCreateNoBuffer##index size: 3000 elems
M ThCreateVBAdm##allocated 12176 bytes (50 server) at 0xffffffff77900000
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 7 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 7, WP_CNT = 12, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0xfffffffe42000100, size: 30000000, end: 0xfffffffe43c9c480)
B dbtbxbuf: Buffer TABLP (addr: 0xffffffff6b800100, size: 10240000, end: 0xffffffff6c1c4100)
B dbexpbuf: Buffer EIBUF (addr: 0xffffffff65800108, size: 4194304, end: 0xffffffff65c00108)
B dbexpbuf: Buffer ESM   (addr: 0xffffffff65000108, size: 4194304, end: 0xffffffff65400108)
B dbexpbuf: Buffer CUA   (addr: 0xfffffffe4b01e108, size: 3072000, end: 0xfffffffe4b30c108)
B dbexpbuf: Buffer OTR   (addr: 0xffffffff64800108, size: 4194304, end: 0xffffffff64c00108)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x106ab5bb0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0xfffffffe4b30e070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0xfffffffe4b30e548
S    using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2168 bytes
S immediate print option for implicitely closed spool requests is disabled
A Mon Nov 10 19:01:11 2008
A
A     PXA
A PXA INITIALIZATION
A PXA: Fragment Size too small: 73 MB, reducing # of fragments
A System page size: 8kb, total admin_size: 11048kb, dir_size: 10992kb.
A Attached to PXA (address 0xfffffffe20000000, size 300000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A     PXA
A
A ABAP ShmAdm attached (addr=0xfffffffe60590000 leng=20938752 end=0xfffffffe61988000)
A >> Shm MMADM area (addr=0xfffffffe6083edd0 leng=140480 end=0xfffffffe60861290)
A >> Shm MMDAT area (addr=0xfffffffe60862000 leng=17981440 end=0xfffffffe61988000)
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects##allocated 12676 bytes at 0xffffffff77700000
N SsfSapSecin: putenv(SECUDIR=/usr/sap/UBQ/DVEBMGS12/sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/UBQ/DVEBMGS12/exe/libsapsecu.so .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W    ipl_Init(): wp task type is 4:BTC, skip initialization
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
B
B Mon Nov 10 19:30:28 2008
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B   max_blocking_factor = 15, max_in_blocking_factor      =   5,
B   min_blocking_factor = 10, min_in_blocking_factor      =   5,
B   prefer_union_all    =   0, prefer_join                 =   0,
B   prefer_fix_blocking =   0, prefer_in_itab_opt          =   1,
B   convert AVG         =   0, alias table FUPD            =   0,
B   escape_as_literal   =   1, opt GE LE to BETWEEN        =   0,
B   select *            =0x0f, character encoding          = STD / <none>:-,
B   use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B                         rule_fae->0, concat_fae->0, concat_fae_or->0
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 0xffffffff78500000
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 0xffffffff78500768
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 0xffffffff785007a0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 0xffffffff785007ac
A
A Mon Nov 10 20:04:25 2008
A WP has reached abap/heaplimit = 40000000 bytes
A
A Tue Nov 11 02:25:41 2008
A generated report /1BCWDY/BSAEKROD3IX58HSBOTLJ==CP         with fingerprint 1078C98BF377F2618A7F4843DE257FC8   50556
Tue Nov 11 02:36:40 2008
actual OCI-type (1) of OUT-variable 0 differs from cached statement (96) ==> reparsing
sc_p=0x10673a550,no=176,idc_p=0x106750c68,con=0,act=1,slen=149,smax=768,#vars=5,stmt=0x107ba9dc0,table=TADIR
prep=1,lit=0,nsql=0,lobret=0,#exec=455,dbcnt=0,upsh_p=(nil),ocistmth_p=0x1073f3ec0
IN : cols=5,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=4294967295,rsize=108,vmax=32,bound=1,iobuf_p=0x1068680e0,vda_p=0x1073f8960
      lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
OUT: cols=1,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=1,rsize=0,vmax=32,bound=1,iobuf_p=(nil),vda_p=0x1073f90f0
      lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
SELECT /*+ FIRST_ROWS */ "OBJ_NAME" FROM "TADIR" WHERE "PGMID" = :A0 AND ( "OBJECT" = :A1 OR "OBJEC\
T" = :A2 ) AND "OBJ_NAME" = :A3 AND ROWNUM <= :A4;
actual OCI-type (96) of OUT-variable 0 differs from cached statement (1) ==> reparsing
sc_p=0x10673a550,no=176,idc_p=0x106750c68,con=0,act=1,slen=149,smax=768,#vars=5,stmt=0x107ba9dc0,table=TADIR
prep=1,lit=0,nsql=0,lobret=0,#exec=2,dbcnt=0,upsh_p=(nil),ocistmth_p=0x1073f3ec0
IN : cols=5,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=4294967295,rsize=108,vmax=32,bound=1,iobuf_p=0x1068680e0,vda_p=0x1073f8960
      lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
OUT: cols=1,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=1,rsize=0,vmax=32,bound=1,iobuf_p=(nil),vda_p=0x1073f90f0
      lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
SELECT /*+ FIRST_ROWS */ "OBJ_NAME" FROM "TADIR" WHERE "PGMID" = :A0 AND ( "OBJECT" = :A1 OR "OBJEC\
T" = :A2 ) AND "OBJ_NAME" = :A3 AND ROWNUM <= :A4;
Tue Nov 11 02:36:42 2008
actual OCI-type (1) of OUT-variable 0 differs from cached statement (96) ==> reparsing
sc_p=0x10673a550,no=176,idc_p=0x106750c68,con=0,act=1,slen=149,smax=768,#vars=5,stmt=0x107ba9dc0,table=TADIR
prep=1,lit=0,nsql=0,lobret=0,#exec=3,dbcnt=0,upsh_p=(nil),ocistmth_p=0x1073f3ec0
IN : cols=5,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=4294967295,rsize=108,vmax=32,bound=1,iobuf_p=0x1068680e0,vda_p=0x1073f8960
      lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
OUT: cols=1,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=1,rsize=0,vmax=32,bound=1,iobuf_p=(nil),vda_p=0x1073f90f0
      lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
SELECT /*+ FIRST_ROWS */ "OBJ_NAME" FROM "TADIR" WHERE "PGMID" = :A0 AND ( "OBJECT" = :A1 OR "OBJEC\
T" = :A2 ) AND "OBJ_NAME" = :A3 AND ROWNUM <= :A4;
Thanks,
Shambo

Hi Shambo
have you checked the oracle parameters as per the sap note 830576,and also the backup which you have taken is a logical backup,in that case you have to run the update database statistics either from DB13 or BRTOOLS
also check ST04 and also ST02 to do a performance tuning
I believe its more Database Parameter issue
regards
George Varghese

Background Job running long time.

Hello All,
One of customer background job running for long time more than 11 hours, but usually this jobs get completed within 4 hrs.
I have checked in WP trace file, it shows "WP has reached abap/heaplimit=40000000".
This is the Value I can see in RZ11. Now it is not possible to change the value.
Frequently facing this problem, please guide me to solve this issue.
Regards
Vinay.

Hi
First of all, abap/heaplimit is the limit of memory usage by a WP.
Follwing is the documentation from help.sap.com
The value of the parameter should be between 10000000 (10 MB) and 2000000000 (2GB), the recommended default setting is 40000000 (40 MB).
The objective is to have the least number of work process restarts as possible, without a swap space bottleneck occurring. The heap memory allocated by the work processes has to be released again.
As shown in the graphic, the value of abap/heaplimit should be smaller than abap/heap_area_dia or abap/heap_area_nondia, so that the dialog step that is running can still be executed. This prevents the work process from working against the operating systemu2019s swap space limit if there is a programmed termination of the work process.
So,Do the above checks. And importantly check the memory utilizations at the time of running your job and check whether any other job was also running at the sametime.
Increasing the parametes is not a good idea.. If you continuously face this issue then only think of parametes. As u said ,this problem is not happenng too often.
Hope this is useful

Regarding Background Job scheduling for file to file scenario

Hi Guru's
Good morining all of u
I have one doubt on ...
can we do background job scheduling for file to file scenario?
Please give me response as early as possible.
thanks and regards
sai

background jobscheduling for file adapter...
you can schedule the file adapter according to your requirement as follows:
In the Communication Channel Monitoring Locate the link Availability Time Planning, In Availability Time Planning, choose the Availability time as daily and say create, give the time details, select the communication channel in your case file adapter , goto the Communication Channels tab and filter and add the respective channel, save it
/people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-

Background job scheduling for report

Hi can any one explain me how to do background job scheduling for report periodically for every 15 min.

Hi Rajesh thanks for your brief explanation.
but I am new to abap so I can't understand exactly will you please make it clear for the below program
REPORT zklj.
data: begin of itab occurs 0,
      partner type but000-partner,
      type     type but000-type,
      BU_SORT1 type but000-BU_SORT1,
      end of itab.
select partner type from but000 into table itab.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE                    =
    FILENAME                        = 'd:\al1\ahaj.xls'
    FILETYPE                        = 'DAT'
APPEND                          = ' '
WRITE_FIELD_SEPARATOR           = ' '
HEADER                          = '00'
TRUNC_TRAILING_BLANKS           = ' '
WRITE_LF                        = 'X'
COL_SELECT                      = ' '
COL_SELECT_MASK                 = ' '
DAT_MODE                        = ' '
CONFIRM_OVERWRITE               = ' '
NO_AUTH_CHECK                   = ' '
CODEPAGE                        = '400'
IGNORE_CERR                     = ABAP_TRUE
REPLACEMENT                     = '#'
WRITE_BOM                       = ' '
TRUNC_TRAILING_BLANKS_EOL       = 'X'
WK1_N_FORMAT                    = ' '
WK1_N_SIZE                      = ' '
WK1_T_FORMAT                    = ' '
WK1_T_SIZE                      = ' '
WRITE_LF_AFTER_LAST_LINE        = ABAP_TRUE
SHOW_TRANSFER_STATUS            = ABAP_TRUE
IMPORTING
FILELENGTH                      =
TABLES
    DATA_TAB                        = itab.

What client is background job running in?

Hello all,
Is there a way to tell which client a background job listed in SM37 is running in? Can't seem to find that information in the job nor any tables. I thought that you could only see the jobs that are running in the client you are logged onto too but that's not the case.
Thanks,
Tom

Hi,
For checking the client for particular background job which is runnig can be cheked by.
Go to SM37- enter the particular job name and the details eg: username and the job start and end condition. Execute this.
Now on top go to Setting->Layout->Change Layout->
On right side u can find the hidden fields-select client from that and bring it to change layout ie. left part. and press copy.
This will change the layout of ur report and u can see the client number for that particular background job running.
U can do this by using * also while mentioning the jobname.This way you do not have to open every job to find out.
Hope this will be of some help.
Thanks
Ruchika
Edited by: Ruchika Kapoor on Jul 2, 2009 2:04 PM

Export of report/query to a file for background job runs

I have a requirement to automate the export of a report or query to a file so when a background job runs a new file is generated to the drive.
This cannot be a customized solution for 1 report, it must be able to adapt to other reports or queries as well.
Any help will be highly appreciated.
Thank you,
Thamina

Hi,
SAP have created a standard program RSTXPDFT4 to convert your Sapscripts spools into a PDF format.
Specify the spool number and you will be able to download the sapscripts spool into your local harddisk.
It look exactly like what you see during a spool display.
Please note that it is not restricted to sapsciprts spool only. Any reports in the spool can be converted using the program 'RSTXPDFT4'.
Regards,
Pavan

Background Job Running long time in Production system ???

Hi guys,
I have custom report which runs normally in 20 minutes. i am executing this report every day. but when i execute the same report yesterday it took 5 hours.
i did the performance trace ....the sql statements are in acceptable range only. i don't see any major time consumption.
since it's in production system we can't debug the active job....
can u guys, throw light on this issue.
Note : there are many posts related to this already in the forum, but not helps to resolve my issue.
Regards
Girish

Giri,
You can use STAD (or older one SE30) to have a trace of the program if you have that access and will be a great help in finding the problem.
If you can't due to some reason, then next time job runs for long (while in ACTIVE state), check SM50 regularly to see that the is process hanging on a table fetch, check that any of the DB table is not getting frequent locks in SM12.
Also, you should check that if your job does any table update, is there any new index created in prod system for that table.
If you can't find anything, then take the necessary access in Prod from basis temporarily and debug the job to find exact issue.
Regards,
Diwakar

Background Job Run - Error Msg

Hi all,
When i run my report as background job it is failing.
In report i have checked one condition n if that do not satisfy it will give error. but in any situation the background job fails though condition satifies but the spool is getin created.
when i debug the report it gives no error in that report but after it gives System message '' Job cancelled after system exception ERROR_MESSAGE''.
any guidelines will be appreciated...
regards,
vikas.

thankx for your reply..
it is not giving me any dump or something neither my report contains any popup window.
thing is that i am checking one error value at the event END-OF-SELECTION and giving some error mesg depending upon that.
when i check this in debug mode in background mode itself (thr' JDBG or SM50) the value of error mesg is empty...so idealy the report is executed fine but when after words i go for F8 it gives me that error message.
regards,
vikas

Background job running slow

Hi,
Suppose any background job is taking much more time than required so how to speed up the job without chaning the master data.
Regards,
Prabhat Sahay

Hello,
If your job is a DP job, please refer to SAP note 864950 and follow the suggestions in the note.
Basically. there're following points:
1)If the job is relevant to planning book/data view, make sure only needful key figures are loaded in the data view.
2)Macros should only be executed on detailed level, except when aggregate level execution is also necessary.
3)Try not to use navigational attributes.
4)Make sure the consisteny of the planning area by:
   /sapapo/ts_lcm_reorg
   /sapapo/ts_lcm_cons_check
5)If you use fixed aggregates, they may affect the performance very much.
   Try to deactivate them and run /sapapo/ts_lcm_cons_check before the job (if the job changes relevant data).
   Then activate and fill the fixed aggregates afterwards.
Best Regards,
Ada

Background Job Scheduling for MC.9

Dear All,
Transaction : MC.9
Program Name: RMCB0300
This transaction is running fine on foreground run but i am not able to schedule a background run for it. It's giving an Error message "No List available" when i try to check the output in SM37 Job Selection transaction. Please help me in this regard.
Regards,
Sushant L

Dear All,
Transaction : MC.9
Program Name: RMCB0300
This transaction is running fine on foreground run but i am not able to schedule a background run for it. It's giving an Error message "No List available" when i try to check the output in SM37 Job Selection transaction. Please help me in this regard.
Regards,
Sushant L

SAP R/3 Enterprise : Background job run on application servers

Hello All,
For our SAP system (SAP_BASIS 620, SAP_ABA 620,SAP_APPL 470), there are 5 application servers and one central instance.
We have a Background job that connects to external non sap system for data delivery via RFC of Type "G" i.e.HTTP Connection to Ext. Server with port 443 . RFC works fine.
In transaction STRUST, SSL certificates are also installed to enable the https connectivity from R3 system.
Our current issue is that background jon runs on one of the application server correctly and is able to transfer that data to external system. However if same job runs on other 4 application server, it fails to connect to external server and throws error:
RFC Destination XXXX not defined
407 Unknown error
Failed to store the XML content
Error in the XML document: 1301540.xml
407 Unknown error
This is very starnge for us .RFC is working correctly every time but background job works on one AS and not on other AS.
Where and What can be the difference in application servers.
Please help to send in ur replies. Thanks
Edited by: Chetna Verma on Apr 27, 2011 1:46 PM

Hi,
Is there a firewall between the non SAP system and the SAP system ? It could be that firewall rules have only been set for one only of the SAP application servers ?
Did you check the HTTP connections from each application server ?
Did you check that the ICM is running on each SAP application server ?
Regards,
Olivier

Inbound IDoc creating background job even for trigger immediately setup

All,
I have a very serious problem in our production system.
Scenario:
Vendor is chagend in system A (Outbound) and the same is interfaced to System B (Inbound) and i am using trigger immediately option, but still I am seeing a background job is created for 'RBDAPP01' and creating the spool request. The issue is I am sending 1000 of idocs and the spool number is increasing daily in system B.
So, can any one explain me why the background job is getting triggered even though I set the partner profile settings as 'Trigger Immediately'.
The above issue is not happening in our quality system it simply updagtes vendor information in system B with out creating any background job. Please note that the same settings are maintained in both the systems.
Your immediate inputs are really valuable for me.
Regards,
Suman

This is an performance issue on the receiving system. In case the system does not have enough resources to process the IDoc immediately it will always schedule a background job to ensure the processing of data.
You need to check whether the system has enough work processes available during the time when 1000 of IDocs are received or send the IDocs in packages with some time in between.
Regards,
Kai

Mail configuration and background job scheduling for ST22 Data

Experts,
I want to know how can i schedule a background job in SAP to extract data from ST22 and send a automated mail for the same?
Any help will be appreciated, Thanks!!!
Regards,
Vinit Pagaria

You don't need to do that, simply configure CCMS (RZ20) to send you an alert via mail when a dump occurs.
Read,
http://help.sap.com/saphelp_nw04/helpdata/EN/90/4e313f8815d036e10000000a114084/frameset.htm
Regards
Juan

GRC AC 5.3 - Sync Mode background job running for days.

Similar Messages

Maybe you are looking for