GRC AC ARM/ARQ: Approver based on Business Unit / Company...

Dear all.
I am wondering if it is feasible to stablishn approver based on a Business Unit / Company.
That is to say:
At the Access Request Creation functionality the requestor could indicate the first name, last name, ....and also it could indicate an specific company, or business unit.
The requestor also assign some roles for some system.
The requestor Submits the request and it goes to the approver assigned to the company
Regards and thank you.

Hi Neraaj. Thanks for your reply, was great!
So now i am moving to next level. My idea is as follow:
have a user requestor who creates Access Request. They set the user id, the name, last name and the Organization (not the department, not the company,...)
I want to create a BRF+ to send the request to an Organizational owner for the Organization set by the requestor.
For that i don't want to create an agent rule because i have to maintain the relationship Organization-Owner into the decision table.
I want to create a BRF+ rule to fecth the owner of the Organization. Where is this owner set? I want to upload a Organizational strcuture into the Access Control organization Master Data. For each Access Control Organization view you can set different tabs AC users, AC roles and Owners. Just like into the image below:
For that i suppose i need a DB Look up just to search for the Owner set in that tab but i am not pretty sure about:
Where is this relationship located?. I have check at HRP100X tables and i found the organizations objects and more data but nothing like the approver.
Once i have found this relationship i don't know if it is possible to get the owner into a variable and set this variable as the result of the function.
Any advise will be well come.
Regards and thank you.

Similar Messages

Click on Account Entity Display Columns Based on Business Units

i have Account Entity.when you click on Account Entity List of Records should Displayed.Now i want to show columns based different Business unit user logged in.
Normally Account will Display Columns like:AccountName,MainPhone,Address1:City,Primary Contact,Email.
if user of business unit1 is logged in i want show accoutname email ,Address1:City only
if user of business unit2 is logged in i want show AccountName,Primary Contact,EMail,MainPhone.
how this can achieved.could anybody help me onthis?
hsk srinivas

Hi,
You can create different personnel views with selected columns and share the respective views only with that particular BU users, So the users who logs in will be able to see only those views.
Regards, Rekha.J

Error count based on business unit and Vehicle type

Hi,
i have a custom error idoc table which contains idoc no, business unit, vehicle type and error message.
Now here my requirement is to display the total count(Error count) of each message based on business unit and
Vehicle type and display it in the output list as shown below. what is the best way to achieve this as there will be number(atleast 6) of error messages available for a business unit based on vehicle type and there are around 15 business units overall for which i should display the error count.
buisness unit| Vehicle Type | Status | Error message                            |                   Error count
71320            WT10               51          Organizational channel missing                      10
                      WT10              51          SMC Missing                             |                      15
72000          WT20                51            Creation of vehicle not possible|                    12
                    WT20                51            Status change not requested    |                     10
regards,
Mani

Hi,
Assign business unit level read access to your entity for which you have written the Report.
Assign the respective business unit to the user, in your case assign business unit Partner to user Partner
and  business unit Manager to user Manager
Also use filtered view in your report if it is SSRS report.
Regards
Ayaz

Show reports based on business unit in crm 2013

Hi,
I have two reports Partner Report and Manager Report. I have created two business unit Partner and Manager. I want to show Partner report to Partner Business unit as like Manager report show only Manager Business unit. Please tell me how is it possible?

Hi,
Assign business unit level read access to your entity for which you have written the Report.
Assign the respective business unit to the user, in your case assign business unit Partner to user Partner
and business unit Manager to user Manager
Also use filtered view in your report if it is SSRS report.
Regards
Ayaz

SCRM Business Units/Company & Facility Visibility

Hi Everyone,
Do the SCRM Business Units need to be enabled in order for users to view company and facility profiles? In the past, we have used P4P to view and edit company and facilities without the SCRM business units enabled on each UGM user’s profile. If I want to enable view only access to all company and facility profiles, do I need to enable and add the SCRM business units?
In our current environment, I can view and edit company and facility profiles without the SCRM business units enabled in UGM. However, when I assign users the SCRM login, search, company reader, facility reader permissions without edit options, I receive the “you do not have permission to view this specification.”
I found the following from one of the Oracle documents:
“SCRM now supports business unit (BU) security. Users will only have access to company and facilities they have been granted access to through SCRM business units on the UGM user profile. This feature also filters the users’ business unit selection list, only showing those business units they have    access to. BU security is configurable and can be turned on or off. The default feature configuration is off. If users have no business units of SCRM     assigned to their UGM user profile they will have access to all business units. Business Unit security can be ignored depending on the status of the     business unit on the company or facility profile. There is a configuration available to set up which business unit statuses are included when SCRM BU     security is evaluated: Common.SCRMBusinessUnitSecurity.Enabled”
My questions are as follows:
Is this a bug in our system?
Am I missing a permission for company/facility visibility?
Do the SCRM business units need to be enabled?
Thanks in advance for any assistance.
Nick

Is Common.SCRMBusinessUnitSecurity.Enabled set to true or false? If its set to false you may have found a bug.
If Common.SCRMBusinessUnitSecurity.Enabled is set to false, we only evaluate roles to determine who has read or edit access to a company profile. So the user must have [SCRM_COMPANY_READER] to see company profiles. Only users with [SCRM_COMPANY_EDITOR] can edit companies.
If Common.SCRMBusinessUnitSecurity.Enabled is turned on then we evaluate roles AND SCRM Business Unit association.
The same applies to facilities, however when we evaluate sourcing approval permissions it gets more complex. For sourcing approvals we evaluate workflow permissions, Object Level Security, SCRM BU Security AND GSM BU security of the BU on the associated specification.
For more information around SCRM BU Security in the white papers section in our documentation listing:
Agile Product Lifecycle Mangement for Process Whitepaper Library

In R12 can we have approval based on rules like Cost Cente or Account?

Hi All,
-In R12 GL can we have approval based on rules like Cost Centers or Account. I know a rule based on Amount can be setup
-In R12 GL can we use the PO hierarchy and its Rules
Thanks.

Dear Srinivasan Muthu,
Assuming that Red,Blue and white are the values for the chracteristic say Colour and if this assigned to
a class type say 023 batch,while uploading the stock,the system asks the chracteristic value.
Say suppose if you are entering 561in MB1C or 101 movement in MIGO for that material and if you
select for Blue,then in MMBE you can click on the stock quantity and right click-->batch classification.
The system shows for Blue colour.
check and revert back.
Regards
Mangalraj.S

Calculation of due date based on Business Days for FICA documents

Hi All,
I am working on project where SD - FICA integration is in picture. We post some charges through SD and FICA document gets posted on relevant Contract Account.
Normally we create Sales Order using transaction VA01 and then we do Billing for this Sales Order through VF01. After billng is done, FICA document automatically gets generated.
We have following requirement to be fulfilled.
For the SD bills posted as above, I want to calculate due date of these bills based on Business Days for FICA document generated (SAP Standard calculate due date based on Calander days). We can use factory calander for calculating business days in relevant function module.
I have checked in the system and it seems that event 1330 ( FM - ISU_DUE_DATE_DETERMINE) is not working in this scenario. Is there any other FM which I can use?
Can anyone help me on this?
Regards,
Pradeep

Hello Praeva ,
The event 1330 has a sample FM FKK_SAMPLE_1330. It doesnt even have a Standard Function Module.
You need to create a Installation-Specific FM and put your code to determine the Due Date based on the logic.
Rgds
Ram Kumar.

Profit centre derivation rule to derive profit centre based in Business plc

Hi,
We required "profit centre derivation rule to derive profit centre based in Business place + 9000 in such case were vendor & customers are involved and current profit center derivation logic doesnu2019t work."
For this we have mapped a substitution pertaining to all co. codes based on all the relevant posting keys for Vendor and Customer where in system will replace the profit center based on business place given in line item as Business Place + 9000. For happening this we have written a User Exit and attached the same with this substitution through t.code OBBH. Entire hting we mapped in our testing client.
But now the problem is whatever posting keys we have defined in our substitution are being used in normal payment and clearing also.
Eg : In payment document vendor is debited vide posting key No 25. where the profit centre is derived based on the invoice that gets selected.
In Normal Payment and clearing transactions, the profit centre is derived based on the profit center in offsetting line items (as per New GL Logic) currently.
Now our business requires that where ever the system is unable to derive a profit centre for vendor and customer (And giving the error " Balancing field profit center in line item 001 not filled") transactions, then at that time profit center for that line item should replace with logic Business Place + 9000 (here business place is the business place contained by that line item in which error is coming for profit center.).
How to map the same in the system through substitution / exit or any other method? Awaiting for your inputs pls. Thanks in advance.
Tapan

Still not answered.
Requesting to give some clue for the same.
Thanks & Regards,
Tapan

Sap standard report for customer trial balance based on business area wise

hi experts,
Can any tell me is there any standard report for customer trial balance based on business area.

hi,
You can use this report.
RFSLD00 Trial balance
For Further Reference use the link.
http://www.abapcode.info/2007/06/standard-sap-reports.html
Regards
Sumit AGarwal

Master and details based on business component

Hello,
I search sample Application master and detail based on business component. how build model and View please any one know link show that step by step thank you.

Hi
http://docs.oracle.com/cd/E18941_01/tutorials/toc.htm
there is not much into it really...
you just select your model project, right click and select new and in the wizard, choose Business Components from tables.
You should, at least have a database schema with at least one PK and FK declarations.
the wizard will take care of everything else.
Regards,
Dimitris.

Filtering metadata based on business need

Hi All,
I want to filter data based on business need. Some members of my dimension have to be filtered so that users can input costs in excel.
I am thinking of flagging an attribute based on the condition.
Eg. Consider Account A and Account B are accounts.
If Account A > 0 and Account B < 0 some way I want to flag it as an attribute. I already have a UDA on this dimension to identify active accounts.
1. Can I flag an attribute by writing a calculation script?
2. Should I create one more account and in the member formula write an if loop and generate 0 or 1 based on whether the condition is satisfied and then filter data in excel. This is a laborious approach.
Can you suggest a better workable approach?

Hi,
If I understood correctly, you essentially want to conditionally assign UDAs for the outline members. We may do it in either of the following ways:
1) In your source file/table for metadata load, you can have an extra column which has values evaluated based on the Accounts (A & B) you'd like to. Tag this field's property as UDA, when creating the DIM. rule file.
2) Retaining the same column, we can duplicate the rows if there is more than one attribute assigned to a member. This avoids to create/maintain multiple columns for UDAs.
This should work whether you're loading data using EIS or using custom rule file.
Let me know incase you've any questions!

How to Create an activity based on business partner

hi guys,
Can any body help regarding the below scenario.
1) Creation an business partner.
2) create an acitvity based on business partner.
3) Create an lead and opputunity based on business parter.
What are the function modules should we used to create the above three steps consequently.
I need the function module for creation of BP , ACTIVITY,
LEAD,OPPURTUNITY.
Regards
Viswa Guntha

Hi,
For creating a business partner, use the FM
BAPI_BUPA_CREATE_FROM_DATA.
For creating lead, opportunities and activities, use the FM CRM_ORDER_MAINTAIN. You need to handle the tables of this FM accordingly to create different kinds of orders.
You can do it so by handling the PROCESS_TYPE of CT_ORDERADM_H in the changing tables.
Regards,
Karthik.

Navigating to another component based on business role

Hello Experts,
I have a hyperlink created for Lead No to navigate to Lead Overview page from my Z component.
How do I restrict this navigation based on business role?
Thanks in advance,
Regards,
Surekha.

Hi Surekha,
You can get the Business Role of the logged in user using the code in this thread.
Re: Business Role of logged in user
Now in the event handler or outbound plug being used for the navigation, determine the business role.Based on this, write an exit statement to restrict navigation. You can give a message to notify the user.
Regards,
Masood Imrani S.

Presentation on Retail and Marketing based on business perspective

Hi Friends,
I am searching for a Presentation on Retail and Marketing based on business verticals.
Could any one provide me with the link or presentation related to the above.
Thanks in advance
kishore

Hi,
Please see the below link.
[http://www.2haveit.com/softwareci2scVerticalMarketApps.html]
[http://www.ksourcerer.org/Business/Vertical-Market-Apps/]
Regards
Krishna

How to update multiple calling hours based on business partner

Hi All,
please help me in this issue : how to update multiple calling hours based on business partner in SAP CRM.
Regards,
Siva kumar.

Check maintainance view V_TB49, add new scheduling type.

GRC AC ARM/ARQ: Approver based on Business Unit / Company...

Similar Messages

Maybe you are looking for