GRC-AE5.2: not found OracleDriver.sda in SP09_P01 file

Hi,
Could anyone give me a hint please...
I'm trying to apply AE5.2 SP09 patch01.
(I)
In the readme.txt of the SP file, OracleDriver.sda file need to be deployed in the applying sequence.
But OracleDriver.sda file is not found in the SP file.
Original direction is
"2. Deploy AEDictionary.sda, AEUME.sda, , OracleDriver.sda, AEEAR.ear, AEWorkFlowWSEAR.ear, AEEAR4WS.ear."
(II)
In the readme.txt of the SP file, 1 SDA file and 1 EAR file are needed to be undeployed.
Meanwhile, 3 SDA files (including OracleDriver.sda) and 3 EAR files are needed to be deployed.
The rest files which are not-undeployed are needed to be undeployed?
regards,
Katsumi

Hi Katsumi,
For system upgradation follows below defined steps:-
SAP Release: WAS 640
AE Installation:-
1.       Undeploy AEUME.sda, AEEAR.ear(if installing on the previous build)
2.       Deploy AEDictionary.sda, AEUME.sda, AEEAR.ear, AEWorkFlowWSEAR.ear, AEEAR4WS.ear
3.       Perform Initdata
      a.       Import with Append option AE_init_append_data.xml
5.       Restart J2EE Engine
6.       Application should work as expected.
Using these steps you can easily upgrade yur support pack's for access enforcer.
Note :-You dont need to deploy OracleDriver.sda if your backend at sql server and MAX DB.
Regards,
Jagat

Similar Messages

PXE T01 file not found PXE E3B TFTP Error file not found error

Hi,
I was trying to deploy OS through SCCM . i have made DHCP server and SCCM PC one PCst when i am trying to boot from client to DHCP by f12 i am getting following error. so that i have been completed following steps
TFTP
PXE-T01: File not found
PXE:E3B: TFTP Error- File not found
1)Removed WDS service and reconfigured
2)PXE role removed and re assigned
3)renamed temp folder
4)DP updated
suppose if i am trying to access the port throgh telnet
i am getting
C:\Documents and Settings\Administrator>telnet 192.168.1.65 60
Connecting To 192.168.1.65...Could not open connection to the host, on port 60:
Connect failed
C:\Documents and Settings\Administrator>telnet 192.168.1.65 67
Connecting To 192.168.1.65...Could not open connection to the host, on port 67:
Connect failed
C:\Documents and Settings\Administrator>telnet 192.168.1.65 66
Connecting To 192.168.1.65...Could not open connection to the host, on port 66:
Connect failed
C:\Documents and Settings\Administrator>telnet 192.168.1.65 65
Connecting To 192.168.1.65...Could not open connection to the host, on port 65:
Connect failed
SCCM PXEsetup.log
====================================================================
<05-17-2011 22:02:14> SMSPXE Setup Started....
<05-17-2011 22:02:14> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-17-2011 22:02:14> Installing Pre Reqs for SMSPXE
<05-17-2011 22:02:14>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-17-2011 22:02:14> Found 2 Pre Reqs for Role SMSPXE
<05-17-2011 22:02:14> Pre Req MSXML60 found.
<05-17-2011 22:02:14> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-17-2011 22:02:14> Pre Req MSXML60 is already installed. Skipping it.
<05-17-2011 22:02:14> Pre Req Wimgapi found.
<05-17-2011 22:02:14> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-17-2011 22:02:14> Pre Req Wimgapi is already installed. Skipping it.
<05-17-2011 22:02:14>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-17-2011 22:02:14> Installing the SMSPXE
<05-17-2011 22:02:14> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-17-2011 22:02:14> Error - WDS is not installed. Installation cannot continue
<05-17-2011 23:02:35> ====================================================================
<05-17-2011 23:02:35> SMSPXE Setup Started....
<05-17-2011 23:02:35> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-17-2011 23:02:35> Installing Pre Reqs for SMSPXE
<05-17-2011 23:02:35>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-17-2011 23:02:35> Found 2 Pre Reqs for Role SMSPXE
<05-17-2011 23:02:35> Pre Req MSXML60 found.
<05-17-2011 23:02:35> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-17-2011 23:02:35> Pre Req MSXML60 is already installed. Skipping it.
<05-17-2011 23:02:35> Pre Req Wimgapi found.
<05-17-2011 23:02:35> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-17-2011 23:02:35> Pre Req Wimgapi is already installed. Skipping it.
<05-17-2011 23:02:35>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-17-2011 23:02:35> Installing the SMSPXE
<05-17-2011 23:02:35> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-17-2011 23:02:35> Error - WDS is not installed. Installation cannot continue
<05-17-2011 23:38:26> ====================================================================
<05-17-2011 23:38:26> SMSPXE Setup Started....
<05-17-2011 23:38:26> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-17-2011 23:38:26> Installing Pre Reqs for SMSPXE
<05-17-2011 23:38:26>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-17-2011 23:38:26> Found 2 Pre Reqs for Role SMSPXE
<05-17-2011 23:38:26> Pre Req MSXML60 found.
<05-17-2011 23:38:26> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-17-2011 23:38:26> Pre Req MSXML60 is already installed. Skipping it.
<05-17-2011 23:38:26> Pre Req Wimgapi found.
<05-17-2011 23:38:26> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-17-2011 23:38:26> Pre Req Wimgapi is already installed. Skipping it.
<05-17-2011 23:38:26>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-17-2011 23:38:26> Installing the SMSPXE
<05-17-2011 23:38:26> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-17-2011 23:38:26> WDS Service is installed.
<05-17-2011 23:38:26> No versions of SMSPXE are installed. Installing new SMSPXE.
<05-17-2011 23:38:26> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-17-2011 23:38:26> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-17-2011 23:39:47> pxe.msi exited with return code: 0
<05-17-2011 23:39:47> Installation was successful.
<05-18-2011 22:20:04> ====================================================================
<05-18-2011 22:20:04> SMSPXE Setup Started....
<05-18-2011 22:20:04> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /deinstall /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 22:20:04> Deinstalling the SMSPXE
<05-18-2011 22:20:04> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 22:20:04> Deinstalling SMSPXE, with product code {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}
<05-18-2011 22:20:15> SMSPXE deinstall exited with return code: 0
<05-18-2011 22:20:15> Deinstallation was successful.
<05-18-2011 22:20:15> Removing PXE Registry.
<05-18-2011 22:23:18> ====================================================================
<05-18-2011 22:23:18> SMSPXE Setup Started....
<05-18-2011 22:23:18> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 22:23:18> Installing Pre Reqs for SMSPXE
<05-18-2011 22:23:18>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-18-2011 22:23:18> Found 2 Pre Reqs for Role SMSPXE
<05-18-2011 22:23:18> Pre Req MSXML60 found.
<05-18-2011 22:23:18> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-18-2011 22:23:18> Pre Req MSXML60 is already installed. Skipping it.
<05-18-2011 22:23:18> Pre Req Wimgapi found.
<05-18-2011 22:23:18> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-18-2011 22:23:18> Pre Req Wimgapi is already installed. Skipping it.
<05-18-2011 22:23:18>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-18-2011 22:23:18> Installing the SMSPXE
<05-18-2011 22:23:18> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-18-2011 22:23:18> WDS Service is installed.
<05-18-2011 22:23:18> No versions of SMSPXE are installed. Installing new SMSPXE.
<05-18-2011 22:23:18> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 22:23:18> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-18-2011 22:24:11> pxe.msi exited with return code: 0
<05-18-2011 22:24:11> Installation was successful.
<05-18-2011 22:31:06> ====================================================================
<05-18-2011 22:31:06> SMSPXE Setup Started....
<05-18-2011 22:31:06> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 22:31:06> Installing Pre Reqs for SMSPXE
<05-18-2011 22:31:06>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-18-2011 22:31:06> Found 2 Pre Reqs for Role SMSPXE
<05-18-2011 22:31:06> Pre Req MSXML60 found.
<05-18-2011 22:31:06> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-18-2011 22:31:06> Pre Req MSXML60 is already installed. Skipping it.
<05-18-2011 22:31:06> Pre Req Wimgapi found.
<05-18-2011 22:31:06> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-18-2011 22:31:06> Pre Req Wimgapi is already installed. Skipping it.
<05-18-2011 22:31:06>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-18-2011 22:31:06> Installing the SMSPXE
<05-18-2011 22:31:06> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-18-2011 22:31:06> WDS Service is installed.
<05-18-2011 22:31:06> SMSPXE already installed (Product Code: {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}). Upgrading/Reinstalling SMSPXE
<05-18-2011 22:31:06> New SMSPXE is the same product code. This is a minor upgrade.
<05-18-2011 22:31:06> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 22:31:06> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi REINSTALL=ALL REINSTALLMODE=vmaus CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-18-2011 22:35:43> pxe.msi exited with return code: 0
<05-18-2011 22:35:43> Installation was successful.
<05-18-2011 23:41:19> ====================================================================
<05-18-2011 23:41:19> SMSPXE Setup Started....
<05-18-2011 23:41:19> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /deinstall /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-18-2011 23:41:19> Deinstalling the SMSPXE
<05-18-2011 23:41:19> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-18-2011 23:41:19> Deinstalling SMSPXE, with product code {C63C1FBD-C9C8-469D-8ADE-12387FB5EA75}
<05-18-2011 23:41:33> SMSPXE deinstall exited with return code: 0
<05-18-2011 23:41:33> Deinstallation was successful.
<05-18-2011 23:41:33> Removing PXE Registry.
<05-19-2011 00:38:50> ====================================================================
<05-19-2011 00:38:50> SMSPXE Setup Started....
<05-19-2011 00:38:50> Parameters: C:\PROGRA~1\MICROS~4\bin\i386\ROLESE~1.EXE /install /siteserver:DRDO-QQLUVGDI0P SMSPXE
<05-19-2011 00:38:50> Installing Pre Reqs for SMSPXE
<05-19-2011 00:38:50>         ======== Installing Pre Reqs for Role SMSPXE ========
<05-19-2011 00:38:50> Found 2 Pre Reqs for Role SMSPXE
<05-19-2011 00:38:50> Pre Req MSXML60 found.
<05-19-2011 00:38:50> MSXML60 already installed (Product Code: {A43BF6A5-D5F0-4AAA-BF41-65995063EC44}). Would not install again.
<05-19-2011 00:38:50> Pre Req MSXML60 is already installed. Skipping it.
<05-19-2011 00:38:50> Pre Req Wimgapi found.
<05-19-2011 00:38:50> Wimgapi already installed (Product Code: {721ABC3B-5F12-4332-9C0C-C11424EF666C}). Would not install again.
<05-19-2011 00:38:50> Pre Req Wimgapi is already installed. Skipping it.
<05-19-2011 00:38:50>         ======== Completed Installion of Pre Reqs for Role SMSPXE ========
<05-19-2011 00:38:50> Installing the SMSPXE
<05-19-2011 00:38:50> Machine is running Windows 2003 SP1 or later. (NTVersion=0X502, ServicePack=2)
<05-19-2011 00:38:50> WDS Service is installed.
<05-19-2011 00:38:50> No versions of SMSPXE are installed. Installing new SMSPXE.
<05-19-2011 00:38:50> Enabling MSI logging. pxe.msi will log to C:\Program Files\Microsoft Configuration Manager\logs\pxeMSI.log
<05-19-2011 00:38:50> Installing C:\Program Files\Microsoft Configuration Manager\bin\i386\pxe.msi CCMINSTALLDIR="C:\Program Files\SMS_CCM" PXEENABLELOGGING=TRUE PXELOGLEVEL=1 PXELOGMAXSIZE=1000000 PXELOGMAXHISTORY=1
<05-19-2011 00:39:15> pxe.msi exited with return code: 0
<05-19-2011 00:39:15> Installation was successful.

I have similar issue same above error but this error i am getting intermittent keeping trying 2 or 3 times i get F12 option to boot the network services
TFTP
PXE-T01 The specified file not found
PXE-E3B TFTP Error : File not found
Our environment have DHCP configured In Inflobox and the Primary site server and PXE DP server located in Same Subnet and configured 2008 R2 sp1 and configured SCCM2012 in VM environment
I tried all the Options uninstall and re-install no luck and i have tried to increase Tramsmiit and recive Buffer size in lan card but the issue is not resolved.
Capture smspxe log when it found boot image the pxe working ,when it not found getting TFTP error.
SMSPxe log says no errors but getting client Pxe TFTP error file not found (Since its not looking Image throw out TFTP error)
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777230" ServerName="" ServerRemoteName=""><Machine><ClientID>GUID:49D9F374-7606-4277-8AE9-FEE608FFB01E</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="SGP20001" OfferIDTime="6/25/2012 11:09:00 AM" PkgID="SGP00009" PackageVersion="" PackagePath="http://XXX.company.com/SMS_DP_SMSPKG$/SGP00004" BootImageID="SGP00004" Mandatory="0"/></ClientIDReply>
Client Identity: 9c7f0d6a-58dd-4cda-a4f0-3f66316067fb
PXE::CBootImageManager::FindMatchingArchitectureBootImage
Set media certificate in transport
Set authenticator in transport
SMSPxe log says no errors t i can able to do pxe Log found Boot image
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="16777230" ServerName="" ServerRemoteName=""><Machine><ClientID>GUID:49D9F374-7606-4277-8AE9-FEE608FFB01E</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="SGP20001" OfferIDTime="6/25/2012 11:09:00 AM" PkgID="SGP00009" PackageVersion="" PackagePath="http://xxx.company.com/SMS_DP_SMSPKG$/SGP00004" BootImageID="SGP00004" Mandatory="0"/></ClientIDReply>
Client Identity: 9c7f0d6a-58dd-4cda-a4f0-3f66316067fb
PXE::CBootImageManager::FindMatchingArchitectureBootImage
PXE::CBootImageManager::FindBootImage: SGP00004
Looking for bootImage SGP00004
PXE::CBootImageCache::FindImage
PXE::CBootImageInfo::UpdateAccessTime
Appreciate if you could provide some solution
Ksrini

Shared library: function is not found and recognized in header file

Hello,
I am trying to use Java methods into LV. I am doing so by creating Java Invocation Interface, usind which I can call Java methods into C++ and then create a shared library that can be called into LV.
When I am importing my shared library into Labview, I am getting the following error messages:
The shared library contains 3 function(s). But no function is found and recognized in the header file. The following function(s) cannot be wrapped. If you want to import these functions, please review the warning messages next to the functions below. You will need to fix the problems before you can continue with the wizard.
jclass invokeJavaClass(JNIEnv* jenv, string className);
The following symbols are not defined:
jclass;
Undefined symbols can prevent the wizard from recognizing functions and parameters. To correct this problem, check the header file to determine if you must add preprocessor definitions. Click the Back button to return to the previous page of the wizard to add a preprocessor definitionsl (for example, "NIAPI_stdcall = __stdcall" or "NIAPIDefined = 1").
The following header file was not found in the specified header file or one of the referenced header files:
- string
- iostream
- cstring
- jni.h
To fix, click the Back button to go to the previous page and add the header file path to the Include Paths list.
Please advise.
Regards,
H
Attachments:
SharedLibError.png ‏51 KB

Hello Vivek,
The LabVIEW dll that I am trying to import does not include any third-party device..all my code is fully based on LabVIEW. Maybe this helps you to guess what is happening: once I've parsed the dll' header appears an error
like this one:
void
__cdecl Zdmt(LVBoolean *stop, double P, char channelName[],
    TD1
*errorIn, TD14 *FFTOptions, TD12 *Calibration, char FileName[],
int32_t minRecordLength, TD26 *InstrumentHandler, LVRefNum
sessionRefArray[],
    LVRefNum *queueIN, TD1 *errorOut, LVBoolean
*averagingDone,
    HWAVES LastRecordFetched, TD24 *Impedance, TD17
*ColeColeCluster,
    TD18 *FFTcluster, TD5
*InstrumentHandleOutputCluster, LVRefNum *queueOut,
    int32_t
*Acquired, TD6 *FreqTimeInfoCluster, double *averagesCompleted,
int32_t len);
The following symbols are not defined:
LVBoolean;
int32_t; LVRefNum;
Undefined symbols can prevent the wizard
from recognizing functions and parameters. To correct this problem,
check the header file to determine if you must add predefined symbols.
Click the Back button to return to the previous page of the wizard to
add a preprocessor definitionsl (for example, "NIAPI_stdcall =
__stdcall" or "NIAPIDefined = 1").
The following header file was
not found in the specified header file or one of the referenced header
files:
- extcode.h
To fix, click the Back button to go to the
previous page and add the header file path to the Include Paths list.
I have replaced the first line #include "extcode.h" of
the dll header file for #include "C:\Program Files\National
Instruments\LabVIEW 8.6\cintools\extcode.h" that is the full path where
the header file is located. However, new libraries seems to be missed:
- stdint.h
- MacTypes.h
As far as I know, Mactypes.h contains basic mac os data types and it doesn't have any relation with stdint.h...
I have created both of them and stored into the same folder as extcode.h, but then other libraries are missed!!!
Do you know if it would be possible to create the .dll generating all the header files associated for its data structures???
And if this is not factible, then what do you suggest me? because I hope to not having to create all the header files until it stops giving me an error!
thanks for four time,
ben

I am trying to install adobe livecycle designer es4 trial version on my computer and i keep getting the message Error 13.11 Source file not found: c:\ verify that the file exist. I have tried to install on both windows 7 and windows 8 and i still get the

error 13.11 Source file not found verify that the file exsist

Try a more recent version of my advice. The "for older video cards version" may work when the default version doesn't.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Dreamweaver reports file "not found" when attempting to open files from SMB server...

User's work-files are hosted on a Windows Server 2003 SP2 volume accessed via SMB. She's been opening and saving the files from the server successfully in Dreamweaver for years from other Macs running Dreamweaver CS4.
Now she has an iMac running 10.7.4 and Dreamweaver CS6... and it's not the SMB problem you'd expect.
She mounts the server volume. She opens and saves files normally with full r/w permissions from any app... except Dreamweaver. For any file that she attempts to open in Dreamweaver -- whether from the Finder or from within Dreamweaver -- Dreamweaver pops up an alert reporting that the file at the file-path was not found. The same file is easily accessible from other apps and from the Finder. She continues to have full read/write access to the shared volume.
Local copies of the files do not have the problem. It only affects files hosted on the server and it only happens in Dreamweaver.
So, I create a new user account and everything works fine... The user mounts the sharepoint, opens a file with Dreamweaver... perfectly normal. Then she quits Dreamweaver and relaunches it... everything's fine. Repeatedly. It all works normally. She quits Dreamweaver and unmounts the share, then she mounts the share again and tries to open a file in Dreamweaver again... and it reports that the file was not found.
This is reproducible: If the server volume has been mounted and unmounted repeatedly under any user account, that triggers the error which continues occurring under that user account from that point on. A restart will not fix it. A safe-boot will not fix it. (In fact, restarting seems to trigger the problem by unmounting the volume.)
I tried trashing the entire contents of the ~/Library folder in one of the test-user accounts. It doesn't fix the problem. Once it strikes a user account, the only temporary fix seems to be using a new user account. And that's like a ticking time bomb just waiting for the problem to pop up again.
Any ideas?
TIA!!

I've seen on two computers so far. Looking at the mount point under unix, the share is being mounted at two different locations. This is normal behaviour for Macs when you mount two different shares with the same name.
From terminal I run:
df
Which returns something like
/dev/disk0s2                           1951845952 224463456 1726870496    12%    /
devfs                                         360       360          0   100%    /dev
map -hosts                                      0         0          0   100%    /net
map auto_home                                   0         0          0   100%    /home
//[email protected]/website 204360384 38067872 166292512    19%    /Volumes/website
//[email protected]/website 204360384 38067872 166292512    19%    /Volumes/website-1
map -fstab                                      0         0          0   100%    /Network/Servers
Notice that the share "website" has been mounted once as website, and again as website-1. This is the underlying unix name for the share, which is how most programs (99% sure including Adobe suite products) will reference files. So, if it thinks that the file is at /Volumes/website/site/index.html but can only see /Volumes/website-1/ then it doesn't know what to do.
The confusion arises because both will show in Finder as "website". Even more annoying is that Finder does not always unmount shares correctly, so that /Volumes/website might not be accessible but /Volumes/website-1 will be. As far as the user is concerned, the share "website" is still mounted, but as far as Dreamweaver is concerned, it isn't, although website-1 is.
It's the same share, same data, but is being referenced by different names, so does not seem accessible.
BUT
I don't have a solution yet, apart from force unmounting both (or rebooting), remounting, and checking that Dreamweaver is using the right share (perhaps by removing and readding from within Dreamweaver).
Tedious.

File not found error when opening .JPG files in Photoshop CC

uninstalled and reinstalled photoshop CC and cannot resolve this issue.
any time i open a .jpg file in photoshop, I get a "Could not complete your request because the file was not found."
the file is obviously there, so i'm assuming its missing some sort of plugin, which i thought would be resolved when reinstalling photoshop.
very frustrated and not sure how to fix this.
running OSX mavericks
please help

used bridge, didn't work.
tried right-click, double click..open in program.
same error.
files work in other adobe products.....
only way to get a jpg in there is to "paste" it in.

Class not found error while executing jar file

I have written a java code in which i am connecting to database....when i run the class file using......java class_filename it works........
but when i run the jar file using .......java -jar jar_name ...yi gives me the error as 'Class not found'......
can anybody help me please......
Thanks and Regards,
Siddhesh

that class is part of jar file.....in classpath i have included zip files for jdbc ...to get databse connection.....and the jar being executed ................still it gives the error ClassDefnotfound which i think is due to database connection problem.....the exception is raised while.....
Class.ForName("Driver_name").newInstance();/ This driver is present in zip files that i have added in classpath....
above statement doesn,t giv error while i execute the class file............but exception while executing jar file only..
Thnaks and regards,
siddhesh

File Not Found bug with long audio file names?

Hello -
Crazy problem. I'll probably post way too much information, but I want to make sure I cover everything. Help!
We run Logic Studio/Logic 8 on multiple 10.4.10/11 computers - G5 Power PC, new intel iMac, intel mini, G4 laptops. We are working on an audio post job using very messy OMFs that were prepared in Final Cut. We had problems opening them in Logic, so we opened the OMFs in Soundtrack Pro, exported to AAFs, and opened those in Logic.
The sessions look fine in Logic now (all files relinked), and the session is consolidated - ie, all files are local/in the project folder's Audio Files folder. I see this in the Audio Bin and can confirm in the finder.
Here's the problem. With the sessions closed:
(A) I renamed the project folder by adding an asterix to the front of the folder name, and changed the color label of the folder in the finder in order to mark it as the original folder.
(B) I made a copy of the whole folder (session files & audio files) in order to have something to work from and not mess up the original. When I opened up the session in the new folder, it immediately said audio file not found, do you want to search, locate, or skip. It couldn't find the file in a search, and obviously when you skip, then skip, then skip all, it opens the session with the data (regions are there but grayed) - so all the audio files are orphaned.
So when I try to locate the file, here's what happens. . . The audio file names are really horrendously long (must be some artifact of working in Final Cut). We're talking: "1087-001A SERG AIRPORT WAITING * 1-1channel_00044D02AA9- 363A-4CC5-A86B-0741023DB062.aif" - one bazillion characters.
So the audio file locate dialog box truncates the name of the file that's missing by using the first 20 characters or so, and then a "#" character, and then some random string of 3-6 characters that is not at all related to the file name. So who knows which of the 4-30 SERG AIRPORT files is supposed to go there!
Obviously if this were a 2 minute session file of 10 files or something, we could figure it out and relink everything, but we're talking about a feature-length session with a bazillion files.
(C) Okay, so I tried to open the original session, in the folder that I had renamed by prefacing the original name with an * and changing the color of the folder. But I started to get the file not found errors. OH GEEZ. So I didn't save. I re-renamed the folder by taking out the * and changing the color label back. Then I tried to open the session again, but I still kept getting the file not found problem.
I have to stress that I didn't move any of the audio files, or change ANYTHING in the session.
So I thought - is all of this because I tried to open a new instance of the session, in a new instance of the folder? Is it because I renamed the folders? Normally you can rename folders, even session names, no problems, and Logic corrects the paths to the audio files!
(D) So, crap. I reopened the original AAF file in logic and saved it in a new place. I closed the file, reopened it, closed, reopened, just to make sure everything was working! I checked the location of the files in the audio bin, and everything was great.
(E) So now I copied the folders to an external hard drive to be able to work on another computer. But when I tried to open the sessions on a new computer. . . You guessed it, nada.
So. . . the questions are:
(1) Those original sessions that now will not work - is there anything I can do to recover their functionality? We had work in there that I would prefer not to lose. . .
(2) Is this a known bug having to do with the length of the Audio File names?
(3) How do we get over this? My only idea so far is we could select all in a working logic session and say "Audio Tracks names to regions" or something and will that change the actual file names on teh computer? Then hopefully things would work on mulitple systems. . .
Okay. HELP! Thanks!
Polly

OK I got it.
It is necessary to use prefix "file:///" before file name.
Thanx everyway.

File not found Exception when zipping a file

Hello I seem to have run into a problem when trying to zip a directory.
I get the error:
java.io.FileNotFoundException: C:\Users\dojo\Documents\Programming\compress (Access is denied)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
at java.io.FileOutputStream.<init>(FileOutputStream.java:70)
at ZipUtility.zip(ZipUtility.java:31)
at ZipUtility.main(ZipUtility.java:21)
when i run the code
import java.io.File;
import java.io.FileOutputStream;
import java.util.zip.ZipEntry;
import java.util.zip.ZipOutputStream;
import java.io.*;
public class ZipUtility {
     public ZipOutputStream cpZipOutputStream = null;
     public String strSource = "";
     public String strTarget = "";
     public static long size          = 0;
     public static int   numOfFiles    = 0;
     public static void main(String args[]) {
          ZipUtility udZipUtility = new ZipUtility();
          udZipUtility.strSource = "C:\\Users\\dojo\\Documents\\Programming\\compress\\restoreDump"; //args[0];
          udZipUtility.strTarget = "C:\\Users\\dojo\\Documents\\Programming\\compress"; //args[1];
          udZipUtility.zip();
     public void zip(){
          try          {
               File cpFile = new File (strSource);
               if (!cpFile.isFile() && !cpFile.isDirectory() ) {
                    System.out.println("\nSource file/directory Not Found!");
                    return;
               FileOutputStream fos = new FileOutputStream(strTarget);
               cpZipOutputStream = new ZipOutputStream(fos);
               cpZipOutputStream.setLevel(9);
               zipFiles( cpFile);
               cpZipOutputStream.finish();
               cpZipOutputStream.close();
               System.out.println("\n Finished creating zip file " + strTarget + " from source " + strSource);
               System.out.println("\n Total of " + numOfFiles +" files are Zipped " );
               System.out.println("\n Total of " + size + " bytes are Zipped ");
          }     catch (Exception e){
               e.printStackTrace();
     public void zipFiles(File cpFile) {
          int byteCount;
          final int DATA_BLOCK_SIZE = 2048;
          FileInputStream cpFileInputStream;
          if (cpFile.isDirectory()) {
               if(cpFile.getName().equalsIgnoreCase(".metadata")){ //if directory name is .metadata, skip it.
                    return;
               File [] fList = cpFile.listFiles() ;
               for (int i=0; i< fList.length; i++){
                    zipFiles(fList) ;
          else {
               try {
                    if(cpFile.getAbsolutePath().equalsIgnoreCase(strTarget)){
                         return;
                    System.out.println("Zipping "+cpFile);
                    size += cpFile.length();
                    //String strAbsPath = cpFile.getAbsolutePath();
                    numOfFiles++;
                    String strAbsPath = cpFile.getPath();
                    String strZipEntryName = strAbsPath.substring(strSource.length()+1, strAbsPath.length());
                    //byte[] b = new byte[ (int)(cpFile.length()) ];
                    cpFileInputStream = new FileInputStream (cpFile) ;
                    ZipEntry cpZipEntry = new ZipEntry(strZipEntryName);
                    cpZipOutputStream.putNextEntry(cpZipEntry );
                    byte[] b = new byte[DATA_BLOCK_SIZE];
                    while ( (byteCount = cpFileInputStream.read(b, 0, DATA_BLOCK_SIZE)) != -1)
                         cpZipOutputStream.write(b, 0, byteCount);
                    //cpZipOutputStream.write(b, 0, (int)cpFile.length());
                    cpZipOutputStream.closeEntry() ;
               } catch (Exception e) {
                    e.printStackTrace();
I really have no idea why its saying access denied if anyone can help that would be great.

son_goku
Read the stack trace from the bottom up. It's telling you that the error, or exception arose
at ZipUtility.zip(ZipUtility.java:21)
which is udZipUtility.zip();This line called the zip() method which threw an exception
at ZipUtility.main(ZipUtility.java:31)
which is FileOutputStream fos = new FileOutputStream(strTarget);What is the value of strTarget?"C:\\Users\\dojo\\Documents\\Programming\\compress"This is a folder, isn't it?
Read the javadoc for public FileOutputStream(String name)
       throws FileNotFoundException
If the file exists but is a directory rather than a regular file, does not exist but cannot be created, or cannot be opened for any other reason then a FileNotFoundException is thrown.
Regards, Darryl

Page not found, slow loading times CC Files

Hi,
Two weeks ago I reported that there were CC files problems like 'page not found' errors and slow loading times and pages not even showing anything. Those problems were temporarily resolved but are back as of today.
Please fix this because for me this is not workable and I guess for many others. I've already moved part of my design files away from CC Files and am now reaching the point were I want to abandon this beta-ware altogether.
I'm living in Europe, maybe this gives additional info. Maybe server problems only in this continent?
Thanks for looking into this.
Jan

So what product would you advice me to file this bug report under? There is no Creative Cloud Files entree or similar.
I'm not sure I'm taken by Adobe support channels policies. if I tweet a complaint some employee tell me I'll be called back by support. Instead of being called back I get asked per email to report on the community forums, when I post on the forum someone tells me to file a bug report. Ehhh...
Time to move on.
Jan

OC4J: Class not found for class in jar file placed in \j2ee\home\applib\

I have an ADF application which uses external libraries (jars), which works fine when running the application from within JDeveloper (TP4).
However if I deploy the application to the embedded OC4J server it won't find any classes imported in those external libraries at runtime (deploy does work). E.g. one library class imports oracle.jbo.server.DBTransaction. If a method of this class is called I get the following exception:
Unexpected exception caught: java.lang.NoClassDefFoundError, msg=oracle/classloader/util/AnnotatedNoClassDefFoundError
oracle/classloader/util/AnnotatedNoClassDefFoundErrorThe same exception, when using a german locale, explicitely states that it cannot find oracle.jbo.server.DBTransaction.
The jar files are placed in the \j2ee\home\applib\ directory and a <library> element to this path is present in application.xml.
Any further hints what could be wrong?

Hi Edwin,
tried your suggestions but without success.
when I add this library to server.xml then following error occures when starting OC4J
17.09.2008 17:10:33 oracle.oc4j.util.SystemLog log
SCHWERWIEGEND: Server start failed processing configuration
java.lang.InstantiationException: Illegal tag, 'library': The library tag has moved from config/server.xml to config/application.xml, please update your configuration manually or reinstall.
        at com.evermind.server.XMLApplicationServerConfig.parseDeploymentMainNode(XMLApplicationServerConfig.java:1227)
        at com.evermind.xml.XMLConfig.parseRootNode(XMLConfig.java:342)
        at com.evermind.xml.XMLConfig.init(XMLConfig.java:222)
        at com.evermind.xml.XMLConfig.init(XMLConfig.java:154)
        at com.evermind.server.XMLApplicationServerConfig.<init>(XMLApplicationServerConfig.java:237)
        at com.evermind.server.ApplicationServer.createConfig(ApplicationServer.java:661)
        at oracle.oc4j.server.ServerFactory$Worker.prepareConfig(ApplicationServerFactory.java:225)
        at oracle.oc4j.server.ServerFactory$Worker.start(ApplicationServerFactory.java:244)
        at oracle.oc4j.server.ServerFactory$Worker.run(ApplicationServerFactory.java:259)
        at java.lang.Thread.run(Thread.java:619)
17.09.2008 17:10:33 oracle.oc4j.util.SystemLog logNoStack
SCHWERWIEGEND: Server exiting: ApplicationServer entered state EXITING--> I added this to application.xml
Than I enabled more logging of classloader "-Duser.country=US -Dclass.load.log.level=finest"
Here a snippet of the output at starttime of OC4J:
================================
08/09/18 10:17:07 Initial class loaders created. Uptime: 3156ms.
08/09/18 10:17:07 Loading main class com.evermind.server.OC4JServer...
08/09/18 10:17:07 com.evermind.server.OC4JServerMain class loaded. Uptime: 3344ms.
08/09/18 10:17:07 Transferring to com.evermind.server.OC4JServer.main()...
08/09/18 10:17:15 Ignoring non-existent code source: D:\oracle\jdevstudio1111_preview4_standalone\j2ee\home\config\..\..\..\BC4J\lib\jmxdc.jar(from <code-source> (ignore manifest Class-Path) in /D:/oracle/jdevstudio1111_preview4_standalone/j2ee/home/config/server.xml)
08/09/18 10:17:15 Ignoring <code-source> (ignore manifest Class-Path) in /D:/oracle/jdevstudio1111_preview4_standalone/j2ee/home/config/server.xml entry: code-source /D:/oracle/jdevstudio1111_preview4_standalone/j2ee/home/lib/api-ext/adflogginghandler.jar (from system property api.ext.dirs) is already visible in the search path of adf.oracle.domain:11.1.4949.
08/09/18 10:17:15 Ignoring non-existent code source: D:\oracle\jdevstudio1111_preview4_standalone\j2ee\home\config\..\..\..\BC4J\lib\jmxdc.jar(from <code-source> (ignore manifest Class-Path) in /D:/oracle/jdevstudio1111_preview4_standalone/j2ee/home/config/server.xml)
08/09/18 10:17:15 Import was not resolved for adf.oracle.domain:11.1.4949: shared library "oracle.fabric.runtime" could not be found.
08/09/18 10:17:15 Import was not resolved for adf.generic.domain:11.1.4949: shared library "oracle.fabric.runtime" could not be found.Seems that oracle.fabric.runtime couldn't be found but the jar's are located in D:\oracle\jdevstudio1111_preview4_standalone\lib\java\shared\oracle.fabric.runtime\11.1.1.0.0
It's the same as with my jdeveloper installation where I don't have this problems.
regards
Peter

RH11 404 - Page Not Found when linking to PDF file from search results using IE9 and IE10

I'm using RH11 (11.0.3.268) and I've included a number of PDF files as baggage files. The hyperlinks on the pages work fine and display the PDF files in a separate window, as expected. However, when searching for these same PDF files using the Search tab, I'm getting a 404 error with the filename. The description on the error shows the filename and says the "the requested resource is not available." This is occurring using IE9 and IE10. And, it only happens within the application, which packages the WebHelp with a war file.
I searched the forum and found where someone was having the same problem on Firefox, but was fine on IE. But, as mentioned, I'm finding it on IE.
Thoughts on how to fix this error?

Is the WAR file extracted at the point when the search is done? If not, I would expect it to fail.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Work flow task id not found in UWL config XML file

Hi
We are facing a strange issue with UWL XML file.
We are running EP 7.0 SP13
We configured UWL and we are able to see the work items in UML iview. These are the same work items as seen in SAP Inbox.
But when we open the uwl.webflow.<system alias> XML file corresponding to the back end system, We were not able to see the task id of the work flow item displayed in the UWL.
Any help on this would be highly appreciated.
Thanks and Regards
VNK

Hi VNK
I am facing the same issue - Please let me know if you have found a solution.
Regards
John

EDIFECS Mapping not found in the X12 Output file in Oracle B2B 11g

Hi,
We are using Oracle SOA suite 11g, we have created a outbound process for EDI 855 which is PO Acknowledgement.
We are using a XML Gateway for the outbound and consuming the message in BPEL. We are mapping the OAG xml to EDIFECS xml to be consumed by Oracle B2B. We had created the EDIFECS xsd and ecs file using Oracle B2B editor and got it validated.
Now the issue is we have mapped few elements in BPEL and the same data is found in the payload message in Oracle B2B, but we are unable to see the data in the X12 output file.
Any thoughts will be hightly appreciated.
Thanks
Sathish

Hi,
Thanks for your update.
The following were the elements missing in the native X12 flat file. I verified these elements present in ecs using oracle b2b document editor.
<ns0:Segment-PO1>
<ns0:Element-355>EA</ns0:Element-355>
<ns0:Element-235>UI</ns0:Element-235>
<ns0:Element-234>UPCXREF</ns0:Element-234>
</ns0:Segment-PO1>
<ns0:Segment-ACK>
<ns0:Element-355 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="">EA</ns0:Element-355>
<ns0:Element-373>20100318</ns0:Element-373>
</ns0:Segment-ACK>
Thanks
Sathish

Navigation Rule not found in faces-config.xml file

Hi All,
I have a B2C custom Webshop application where in the startpage i have a client logo and when i click on that it will navigate to another page for that i have a header.xhtml page in that i have a code <h:link id="iLkL" outcome="toStartPage" value="#{i18n['main.ui.header.logo']}" styleClass="fw-header-logo"> but i was unable to find <Navigation-rule> of toStartPage which is mentioned in the outcome="toStartPage" in the faces-config.xml file. I have checked in the standard component also but didn't find anything. Please help me where can i find the toStartpage value.
Regards,
Rahul.

Hi Rahul,
As correctly mentioned by Steffen earlier, the navigation targets are maintained in the ui-repository.xml files (or navigation-rules.xml files) for each module. Since, you would like to see the definition of the target toStartPage (which is a target accessible and relevant throughout the application), it should be in the WEC main module's (wec/~/main/ui) ui-repository.xml file. Please note that sometimes, the targets are maintained in a file called navigation-rules.xml, which itself is then included into the ui-reppsitory.
Please let me know if you got what you need here.
Best Regards
Pranshu Agarwal

GRC-AE5.2: not found OracleDriver.sda in SP09_P01 file

Similar Messages

Maybe you are looking for