GRC and CUP and Mobiliity question

Hello GRC friends:
In an environment where GRC and CUP are configured and working, the question came to me,
can the requests for the Firefighter ID be sent to a mobile device?
The person responsible for the request approval must now sign on thier PC.
Are there any known impediments to sending these to say an iPAD to be approved?
Thank you in advance for your assistance.
Regards,
Joe Gonzales
856 912 1136

HI Josep!
There are some applications for mobile devices that you'll be able to find here: http://ecohub.sap.com/store/mobility
This particular application is for GRC approval:http://ecohub.sap.com/store/mobility/catalog/#!solution:SAPGRCAccessApprover
I don't know the cost and if it's available in your country neither....
Cheers,
Diego.

Similar Messages

Steps for replacing a connector in GRC CUP and RAR

Hi All, We have GRC 5.3 CUP and RAR installed and I would like to replace an existing connector PRD with one called PRD010. Does anyone have the necessary steps to follow to perform this? Your input is appreciated.

Hi Sudip,
Sorry I didn't clarify and thanks for responding. This will be the same backend. I want to change the connector name within the RAR and CUP config, etc. I'm concerned about all the "tags" in the database tables pertaining to this connector name if you know what I mean. It seems that when you make a change like this you end up with data in the database tagged with the old connector names which makes it difficult to clean out the old stuff unless maybe there is a proper sequence of steps to go thru. Can it be just as simple as creating the new connector and then exporting and importing the rules with the new connector name? Maybe I'm making this more difficult than it really is.
Regards,
Gary

Question on CUPS and Phone Presence

I have what I hope is a simple question. I have CUCM 8.5(1) and CUPS 8.6(3) deployed. My question is about phone presence status in the CUPS Presence Viewer application.
In my configuration I can see the presence status of an individual phone line when that line is on a call but when that phone is not on a call the Presence Status displays as "Unavailable". Further, when looking at the user's devices in CUPS Presence Viewer I can see the associated lines but they are displayed as "unknown".
Shouldn't I be able to see an available status when the phone line is idle?
I have checked and configured the following:
1. Presence groups and inter-presence group subscriptions are allowed
2. CUPS SIP Trunk is provisioned with appropriate SIP profile mods
3. CUCM Call Manager service has associated CUPS trunk
4. Users are associated to the line(s) under test
5. Presence CSS's are defined in a manner that should allow presence viewing
Any thoughts?
Regards,Bill

Hi Bill
AFAIK it's always worked like that - unless a user explicitly logs in to a presence client, he's not 'available'. i.e. the presence of a line on the system isn't enough to make him 'available'.
So he has to log in to CUPC or Phone Messenger (urgh) to be 'available'.
Being based on EM status, CFA status, or inactivity timers on the user's lines would seem like a good idea but I don't think the functionality is there. Of course, it might be - the documentation for this product has always left a fair amount to the imagination.
Aaron

Understanding ERM and CUP integration in AC 10.0

Iu2019m reaching out in hopes to get a better understanding of how AC 10.0 is meant to handle the ERM and CUP integration (Iu2019m still stuck on the old names :). Any feedback would be greatly appreciated.
Currently, we have a requirement to setup the GRC Production box so it can provision user access in the Production ECC but create security roles in Development ECC. This is typically what we see since most clients want to follow their manual transport process to get the security roles from Dev --> QA --> Prod.
Something I noticed in CUP is when a user adds a role to the request form u2013 the role is associated to a system (i.e. Production ECC or Development ECC). If we create a role using ERM and it only gets generated in Development ECC u2013 will we be able to select this role in CUP for user assignment in Production ECC? (assuming itu2019s been transported outside of GRC)
Note: At this point the new role will only be associated to Development ECC from a GRC perspective? So if we assign it in CUP u2013 it will only be associated to Development ECC...?
Do we have to manually perform another u201Crole import / syncu201D from the Production ECC to sync the roles so theyu2019re available in CUP?
This is based on the understanding that CUP looks for available roles for assignment from ERM rather than the Production ECC. Is that correct? Can we have CUP look in the backend rather than ERM?
My question is around the manual u201Crole import / syncu201D that needs to get performed for CUP. Is this really mandatory based on the requirements? It would mean I need to perform a u201Crole import / syncu201D every time a new role is created/deleted/changedu2026 Maybe Iu2019m missing something with the new 10.0 integration / functionality? Are other companies doing something different?
Please let me know what you think. Your insight is greatly appreciated!

Frank,
Thanks for clarifying.
Can you clarify what you mean when you say "you just need to tell CUP that the roles are available in PRD"? What does this mean?
This goes back to the original question - do we need to perform another import of the roles from ECC PRD to ERM? My understanding is that the ERM role repository is looking at my original import of roles and then each role I create using ERM after that. How will it know which roles are in PRD if I don't do a routine synch?
Also, you mentioned "each role has attributes that define in which systems it should be available for requests", where does this get defined? I believe you are referring to the "Role Status" which is set to Development, Production or Testing. I only see the ability to set this during the Role Import, but what about roles which have been created using ERM. I don't see it in the Role details screen - where is the setting?

Business Process and sub Process IN ERM and CUP

Hi Friends,
We are in intial stage of GRC implimentation. Now I am uploading the roles into ERM and CUP. I have defined business processes and sub processes for the roles and upload the roles successfully in ERM. But when I am doing the same excercise in CUP especially during creation of sub process it is not allowing the charecter "-" in the name space.
E.g. Business process name is EHS-SM (Uploaded to CUP)
Sub process name is EHS-SM1.1 (not allowing to create in CUP wher as successfully created in ERM)
My question is
1. why it allows me to do the same thing in ERM but not in CUP.
2. Is there any way to maintain the name with chaecter "-".
For your information I am in the phase of defining the attributes for the roles.
Thanks & Regards,
Satyabrat
Edited by: Sunil Varghese on Oct 28, 2009 10:59 AM
Edited by: Sunil Varghese on Oct 28, 2009 11:01 AM

Hi all,
I will have a hard time ahead with BP and SBP. all are in the same format. I dont think my company will agree to change the name of there BP or SBP because they are thousands in count and also there is no other way around in GRC,
Let give me a try...
Thanks Guys for your support and time.

Cups and "waiting for printer to become available"

Hi all,
i have a problem with cups (i don't know since when),
when i try to print something i receive the message:
"waiting for printer to become available"
And i'm aware that this problem happens when you have usblp loaded. So first of all i checked if the usblp module is loaded and here the result:
usblp 9311 0
usbcore 119004 8 usblp,uvcvideo,uas,usb_storage,usbhid,ohci_hcd,ehci_hcd
But if i go to check the /etc/rc.conf file the MODULES line is:
MODULES=(lib80211_crypt_tkip wl radeon vboxdrv vboxnetflt powernow-k8 cpufreq_ondemand !snd-pcm-oss !b43 !ssb !usblp)
And it seems that usblp module is not loaded.
Now the question is:
What's wrong?
I did something wrong? I forgot somethin?
Thanks,
Ivan

Oddly enough...
I couldn't find usblp in my lsmod output but I was also getting this "cups waiting for printer". My file utility is version 5.18 and although I considered downgrading it, that just felt too much like thrashing about. (My printer is a USB HP LaserJet 1020)
In the end, I did something else that felt like almost as much thrashing about. I followed the "changes to module blacklisting" page with usblp, restarted cups and cycled power on the printer. Now it's working again. I wish I entirely new why.
I think what happened was the automatic power up of the printer (or of the computer) loaded usblp but the fooz file for LaserJet was unloading it so (a) I never saw it in the lsmod output and (b) it was in the system long enough to snarl things, followed by (c) if only it was blacklisted at the time that the system saw the printer it would not be there and not foul things up. Does that sound like a reasonable chain of events.
one more reason to resent (grumble, grumble, grr grr) systemd over the older (admittedly clunkier, more manual -- but more CONTROLLABLE!) initscripts. (Okay, I'm over 45)
cheers...ank
Last edited by ansak (2014-04-27 03:43:41)

Cannot find FF info in ERM, CUP and RAR (GRC5.3)

I can only find FF info on the ABAP system txn /VIRSA/VFAT.
But on the ERM, CUP and RAR (GRC5.3), I cannot find any info about FF.
Which menu path/tab should I go search?
Thanks!

Hi Crishty,
GRC AC contains four components RAR(CC),CUP(AE),ERM(RE) and SPM(FF).
These seperate component have four seperate URL, so you will not get FF in ERM,CUP & RAR.
Here are the URL to access these grc component,
URL for RAR(CC)-
http//<hostname>:<portnumber>/webdynpro/dispatcher/virsa/ccappcomp/ComplianceCalibrator
URL for CUP(AE)-
http://<hostname>:<portnumber>/AE
URL for ERM(RE)-
http://<hostname>:<portnumber>/RE
URL for SPM(FF)-
http://<hostname>:<port>/webdynpro/dispatcher/sap.com/grc~ffappcomp/Firefighter
Thanks,
Sudip

[solved] Brother DCP-110C and CUPS 1.2.x

Hi,
my girlfriend's multifunction printer/scanner-combo from Brother doesn't work. There are drivers (cupswrapper) directly from Brother, but they don't work. There are no error messages in the logfile of cups and the Brother-Logfile.
CUPS detect the printer correct and show it in the webinterface, but printing a test page doesn't work. I have installed the driver with the instructions from their page. I have edit the files to need the directory structure of ArchLinux (/etc/rc.d/ instead /etc/init.d/), but nothing happens. CUPS find the driver and all, but the printer won't print. Can it be, that the drivers from Brother don't work anymore with CUPS 1.2.x, because their driver are written for CUPS 1.1.
Any suggestions??
Daniel
edit: The suggestion from Brother's FAQ, doesn't work.

After some hard fights the multifunction printer/scanner-combo works...
There was several steps necessary to get this device working. First of all, you will need cups and lpd (lprng-package). Both packages conflicts with each others, I know, but the device won't work with only one of them. So I first installed cups and force lprng to install over the files from cups. Very very ugly, I know.
You will need the cupswrapper and the lpd-driver from Brother.
Also the SANE driver from Brother is necessary to scan with the scanner.
After installation of the three drivers from Brother, you must edit the cupswrapper script because there are /etc/init.d in the files. Change these to /etc/rc.d
Cups will find the printer on his own, if the driver is correctly installed. Sane finds the scanner after executing the br2scan (program from Brother) installation steps.
If there are any questions about these device. Feel free to ask me, I think after several days looking through logfiles etc. I can answer all questions....
Daniel
PS: I will search further for a solution for the very ugly pacman -Sfd lprng.....

CAD and CUPS integration query

I have customer integrating CAD (on UCCE 8.5) to CUPS (8.5).
The CUPS infrastructure is being built to log IM chats.
A question has been raised on whether or not CAD's IM chats would be logged?
I'm told it may depend on whether CAD uses XMPP, or SIP/SIMPLE to integrate to CUPS,
but that question aside, would CAD's chat be logged?

Hi
I will try to answer theoretically since I don't have this deployment in the lab nor have I tested the CAD integration.
As per SRND the IM storage is supported on both CUPC 7.x and 8.x clients. That means that both protocols are supported ie SIP/SIMPLE and XMPP
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/presence.html#wp1185603
By default all inbound messages to those clients that pass through CUP server will be stored in the external postgres db (you can also enable outbound IM to be stored but anyway)
So based on the above I would say that yes they should be recorded if the messages pass through CUP server (and I think they do)
HTH
Christos

Arno-iptables-firewall and CUPS

Hello everyone.
I'm having a problem with my firewall and CUPS. The thing is, when I try to print when the firewall is active the programs (kword, kcontrol, etc) can't contact cups daemon. But when the firewall is stopped I can print normally. The problem is obviously something with the firewall configuration.
So, the question is, does anyone know how should I configure the firewall (Arno's iptables firewall) in order to solve this problem?. I thought about opening the cups port (631) but this wouldn't be the best solution. I don't want to open a port that shouldn't be open.
The weird thing is that I can access cups thru localhost:631 using konqueror but incredibly slowly. I don't know why the firewall is blocking cups.
I almost forget. Before you ask the printer is connected direcly to my computer. Is not a network printer. I have the needed module loaded (usblp) and the cups server is running.
Thanks in advance,
Gonza
Last edited by Gonzakpo (2008-06-20 20:16:20)

Hello.
I tried the command iptables -F but nothing. The cups server is still unreacheable by kcontrol.
After running arno's firewall, the iptables -vL output is:
Chain INPUT (policy DROP 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT all -- lo any anywhere anywhere
15 2568 ACCEPT all -- any any anywhere anywhere state ESTABLISHED
0 0 ACCEPT tcp -- any any anywhere anywhere state RELATED tcp dpts:1024:65535
0 0 ACCEPT udp -- any any anywhere anywhere state RELATED udp dpts:1024:65535
0 0 ACCEPT icmp -- any any anywhere anywhere state RELATED
8 1515 HOST_BLOCK all -- any any anywhere anywhere
8 1515 SPOOF_CHK all -- any any anywhere anywhere
8 1515 VALID_CHK all -- eth0 any anywhere anywhere
8 1515 EXT_INPUT_CHAIN !icmp -- eth0 any anywhere anywhere state NEW
0 0 EXT_INPUT_CHAIN icmp -- eth0 any anywhere anywhere state NEW limit: avg 60/sec burst 100
0 0 EXT_ICMP_FLOOD_CHAIN icmp -- eth0 any anywhere anywhere state NEW
0 0 LOG all -- any any anywhere anywhere limit: avg 1/sec burst 5 LOG level info prefix `Dropped INPUT packet: '
0 0 DROP all -- any any anywhere anywhere
Chain FORWARD (policy DROP 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT all -- lo any anywhere anywhere
0 0 TCPMSS tcp -- any eth0 anywhere anywhere tcp flags:SYN,RST/SYN TCPMSS clamp to PMTU
0 0 ACCEPT all -- any any anywhere anywhere state ESTABLISHED
0 0 ACCEPT tcp -- any any anywhere anywhere state RELATED tcp dpts:1024:65535
0 0 ACCEPT udp -- any any anywhere anywhere state RELATED udp dpts:1024:65535
0 0 ACCEPT icmp -- any any anywhere anywhere state RELATED
0 0 HOST_BLOCK all -- any any anywhere anywhere
0 0 UPNP_FORWARD all -- eth0 !eth0 anywhere anywhere
0 0 SPOOF_CHK all -- any any anywhere anywhere
0 0 VALID_CHK all -- eth0 any anywhere anywhere
0 0 LOG all -- any any anywhere anywhere limit: avg 1/min burst 3 LOG level info prefix `Dropped FORWARD packet: '
0 0 DROP all -- any any anywhere anywhere
Chain OUTPUT (policy ACCEPT 8 packets, 552 bytes)
pkts bytes target prot opt in out source destination
0 0 TCPMSS tcp -- any eth0 anywhere anywhere tcp flags:SYN,RST/SYN TCPMSS clamp to PMTU
7 340 ACCEPT all -- any any anywhere anywhere state ESTABLISHED
8 552 HOST_BLOCK all -- any any anywhere anywhere
0 0 LOG all -f any any anywhere anywhere limit: avg 3/min burst 5 LOG level info prefix `FRAGMENTED PACKET (OUT): '
0 0 DROP all -f any any anywhere anywhere
8 552 EXT_OUTPUT_CHAIN all -- any eth0 anywhere anywhere
Chain DMZ_INET_FORWARD_CHAIN (0 references)
pkts bytes target prot opt in out source destination
Chain DMZ_INPUT_CHAIN (0 references)
pkts bytes target prot opt in out source destination
Chain DMZ_LAN_FORWARD_CHAIN (0 references)
pkts bytes target prot opt in out source destination
Chain EXT_FORWARD_CHAIN (0 references)
pkts bytes target prot opt in out source destination
Chain EXT_ICMP_FLOOD_CHAIN (1 references)
pkts bytes target prot opt in out source destination
0 0 LOG icmp -- any any anywhere anywhere icmp destination-unreachable limit: avg 12/hour burst 1 LOG level info prefix `ICMP-unreachable flood: '
0 0 DROP icmp -- any any anywhere anywhere icmp destination-unreachable
0 0 LOG icmp -- any any anywhere anywhere icmp time-exceeded limit: avg 12/hour burst 1 LOG level info prefix `ICMP-time-exceeded flood: '
0 0 DROP icmp -- any any anywhere anywhere icmp time-exceeded
0 0 LOG icmp -- any any anywhere anywhere icmp parameter-problem limit: avg 12/hour burst 1 LOG level info prefix `ICMP-param.-problem flood: '
0 0 DROP icmp -- any any anywhere anywhere icmp parameter-problem
0 0 LOG icmp -- any any anywhere anywhere icmp echo-request limit: avg 12/hour burst 1 LOG level info prefix `ICMP-request(ping) flood: '
0 0 DROP icmp -- any any anywhere anywhere icmp echo-request
0 0 LOG icmp -- any any anywhere anywhere icmp echo-reply limit: avg 12/hour burst 1 LOG level info prefix `ICMP-reply(pong) flood: '
0 0 DROP icmp -- any any anywhere anywhere icmp echo-reply
0 0 LOG icmp -- any any anywhere anywhere icmp source-quench limit: avg 12/hour burst 1 LOG level info prefix `ICMP-source-quench flood: '
0 0 DROP icmp -- any any anywhere anywhere icmp source-quench
0 0 LOG icmp -- any any anywhere anywhere limit: avg 12/hour burst 1 LOG level info prefix `ICMP(other) flood: '
0 0 DROP icmp -- any any anywhere anywhere
Chain EXT_INPUT_CHAIN (2 references)
pkts bytes target prot opt in out source destination
0 0 LOG tcp -- any any anywhere anywhere tcp dpt:0 limit: avg 6/hour burst 1 LOG level info prefix `TCP port 0 OS fingerprint: '
0 0 LOG udp -- any any anywhere anywhere udp dpt:0 limit: avg 6/hour burst 1 LOG level info prefix `UDP port 0 OS fingerprint: '
0 0 DROP tcp -- any any anywhere anywhere tcp dpt:0
0 0 DROP udp -- any any anywhere anywhere udp dpt:0
0 0 LOG tcp -- any any anywhere anywhere tcp spt:0 limit: avg 6/hour burst 5 LOG level info prefix `TCP source port 0: '
0 0 LOG udp -- any any anywhere anywhere udp spt:0 limit: avg 6/hour burst 5 LOG level info prefix `UDP source port 0: '
0 0 DROP tcp -- any any anywhere anywhere tcp spt:0
0 0 DROP udp -- any any anywhere anywhere udp spt:0
4 1314 ACCEPT udp -- any any anywhere anywhere udp spt:bootps dpt:bootpc
0 0 ACCEPT tcp -- + any anywhere anywhere tcp dpt:4872
0 0 ACCEPT udp -- + any anywhere anywhere udp dpt:4875
0 0 LOG icmp -- any any anywhere anywhere icmp echo-request limit: avg 3/min burst 1 LOG level info prefix `ICMP-request: '
0 0 LOG icmp -- any any anywhere anywhere icmp destination-unreachable limit: avg 12/hour burst 1 LOG level info prefix `ICMP-unreachable: '
0 0 LOG icmp -- any any anywhere anywhere icmp time-exceeded limit: avg 12/hour burst 1 LOG level info prefix `ICMP-time-exceeded: '
0 0 LOG icmp -- any any anywhere anywhere icmp parameter-problem limit: avg 12/hour burst 1 LOG level info prefix `ICMP-param.-problem: '
0 0 DROP icmp -- any any anywhere anywhere icmp destination-unreachable
0 0 DROP icmp -- any any anywhere anywhere icmp time-exceeded
0 0 DROP icmp -- any any anywhere anywhere icmp parameter-problem
0 0 DROP icmp -- any any anywhere anywhere icmp echo-request
0 0 DROP icmp -- any any anywhere anywhere icmp echo-reply
0 0 LOG tcp -- any any anywhere anywhere tcp dpts:1024:65535 flags:!FIN,SYN,RST,ACK/SYN limit: avg 3/min burst 5 LOG level info prefix `Stealth scan (UNPRIV)?: '
0 0 LOG tcp -- any any anywhere anywhere tcp dpts:0:1023 flags:!FIN,SYN,RST,ACK/SYN limit: avg 3/min burst 5 LOG level info prefix `Stealth scan (PRIV)?: '
0 0 DROP tcp -- any any anywhere anywhere tcp flags:!FIN,SYN,RST,ACK/SYN
0 0 LOG tcp -- any any anywhere anywhere tcp dpts:0:1023 limit: avg 6/min burst 2 LOG level info prefix `Connection attempt (PRIV): '
0 0 LOG udp -- any any anywhere anywhere udp dpts:0:1023 limit: avg 6/min burst 2 LOG level info prefix `Connection attempt (PRIV): '
2 96 LOG tcp -- any any anywhere anywhere tcp dpts:1024:65535 limit: avg 6/min burst 2 LOG level info prefix `Connection attempt (UNPRIV): '
1 57 LOG udp -- any any anywhere anywhere udp dpts:1024:65535 limit: avg 6/min burst 2 LOG level info prefix `Connection attempt (UNPRIV): '
3 144 DROP tcp -- any any anywhere anywhere
1 57 DROP udp -- any any anywhere anywhere
0 0 DROP icmp -- any any anywhere anywhere
0 0 LOG all -- any any anywhere anywhere limit: avg 1/min burst 5 LOG level info prefix `Other-IP connection attempt: '
0 0 DROP all -- any any anywhere anywhere
Chain EXT_OUTPUT_CHAIN (1 references)
pkts bytes target prot opt in out source destination
Chain HOST_BLOCK (3 references)
pkts bytes target prot opt in out source destination
Chain INET_DMZ_FORWARD_CHAIN (0 references)
pkts bytes target prot opt in out source destination
Chain LAN_INET_FORWARD_CHAIN (0 references)
pkts bytes target prot opt in out source destination
Chain LAN_INPUT_CHAIN (0 references)
pkts bytes target prot opt in out source destination
Chain MAC_FILTER (0 references)
pkts bytes target prot opt in out source destination
Chain POST_FORWARD_CHAIN (0 references)
pkts bytes target prot opt in out source destination
Chain POST_INPUT_CHAIN (0 references)
pkts bytes target prot opt in out source destination
Chain POST_OUTPUT_CHAIN (0 references)
pkts bytes target prot opt in out source destination
Chain RESERVED_NET_CHK (0 references)
pkts bytes target prot opt in out source destination
0 0 LOG all -- any any 10.0.0.0/8 anywhere limit: avg 1/min burst 1 LOG level info prefix `Class A address: '
0 0 LOG all -- any any 172.16.0.0/12 anywhere limit: avg 1/min burst 1 LOG level info prefix `Class B address: '
0 0 LOG all -- any any 192.168.0.0/16 anywhere limit: avg 1/min burst 1 LOG level info prefix `Class C address: '
0 0 LOG all -- any any 169.254.0.0/16 anywhere limit: avg 1/min burst 1 LOG level info prefix `Class M$ address: '
0 0 DROP all -- any any 10.0.0.0/8 anywhere
0 0 DROP all -- any any 172.16.0.0/12 anywhere
0 0 DROP all -- any any 192.168.0.0/16 anywhere
0 0 DROP all -- any any 169.254.0.0/16 anywhere
Chain SPOOF_CHK (2 references)
pkts bytes target prot opt in out source destination
8 1515 RETURN all -- any any anywhere anywhere
Chain UPNP_FORWARD (1 references)
pkts bytes target prot opt in out source destination
Chain VALID_CHK (2 references)
pkts bytes target prot opt in out source destination
0 0 LOG tcp -- any any anywhere anywhere tcp flags:FIN,SYN,RST,PSH,ACK,URG/FIN,PSH,URG limit: avg 3/min burst 5 LOG level info prefix `Stealth XMAS scan: '
0 0 LOG tcp -- any any anywhere anywhere tcp flags:FIN,SYN,RST,PSH,ACK,URG/FIN,SYN,RST,ACK,URG limit: avg 3/min burst 5 LOG level info prefix `Stealth XMAS-PSH scan: '
0 0 LOG tcp -- any any anywhere anywhere tcp flags:FIN,SYN,RST,PSH,ACK,URG/FIN,SYN,RST,PSH,ACK,URG limit: avg 3/min burst 5 LOG level info prefix `Stealth XMAS-ALL scan: '
0 0 LOG tcp -- any any anywhere anywhere tcp flags:FIN,SYN,RST,PSH,ACK,URG/FIN limit: avg 3/min burst 5 LOG level info prefix `Stealth FIN scan: '
0 0 LOG tcp -- any any anywhere anywhere tcp flags:SYN,RST/SYN,RST limit: avg 3/min burst 5 LOG level info prefix `Stealth SYN/RST scan: '
0 0 LOG tcp -- any any anywhere anywhere tcp flags:FIN,SYN/FIN,SYN limit: avg 3/min burst 5 LOG level info prefix `Stealth SYN/FIN scan(?): '
0 0 LOG tcp -- any any anywhere anywhere tcp flags:FIN,SYN,RST,PSH,ACK,URG/NONE limit: avg 3/min burst 5 LOG level info prefix `Stealth Null scan: '
0 0 DROP tcp -- any any anywhere anywhere tcp flags:FIN,SYN,RST,PSH,ACK,URG/FIN,PSH,URG
0 0 DROP tcp -- any any anywhere anywhere tcp flags:FIN,SYN,RST,PSH,ACK,URG/FIN,SYN,RST,ACK,URG
0 0 DROP tcp -- any any anywhere anywhere tcp flags:FIN,SYN,RST,PSH,ACK,URG/FIN,SYN,RST,PSH,ACK,URG
0 0 DROP tcp -- any any anywhere anywhere tcp flags:FIN,SYN,RST,PSH,ACK,URG/FIN
0 0 DROP tcp -- any any anywhere anywhere tcp flags:SYN,RST/SYN,RST
0 0 DROP tcp -- any any anywhere anywhere tcp flags:FIN,SYN/FIN,SYN
0 0 DROP tcp -- any any anywhere anywhere tcp flags:FIN,SYN,RST,PSH,ACK,URG/NONE
0 0 LOG tcp -- any any anywhere anywhere tcp option=64 limit: avg 3/min burst 1 LOG level info prefix `Bad TCP flag(64): '
0 0 LOG tcp -- any any anywhere anywhere tcp option=128 limit: avg 3/min burst 1 LOG level info prefix `Bad TCP flag(128): '
0 0 DROP tcp -- any any anywhere anywhere tcp option=64
0 0 DROP tcp -- any any anywhere anywhere tcp option=128
0 0 DROP all -- any any anywhere anywhere state INVALID
0 0 LOG all -f any any anywhere anywhere limit: avg 3/min burst 1 LOG level warning prefix `Fragmented packet: '
0 0 DROP all -f any any anywhere anywhere

[SOLVED] Problem With Cups and Hp printer.

I am new to using cups. I usually have my operating system do everything for me. Arch seems to be a lot more tricky though.
I have an HP Deskjet 6980 printer. I have been able to successfully use it with Ubuntu, Debian, and Fedora. I noticed that Arch came with HP Device Manager. This is the same program I used to add my printer to fedora. I decided to use this. During the process of adding my printer, it recognized it and when I pressed add printer, it said please restart CUPS and try again. I opened up system monitor and killed the cups process. I then tried to run the installer again and I got the same error. Then I tried to load up the cups interface on firefox but it failed to. I think I need to restart cups but I do not know how.
Last edited by brianji03 (2010-05-08 17:56:05)

brianji03 wrote:
I was successfully able to restart cups. Thankyou. However, I am still getting that error. Is there something I need to do in the cups interface?
Nevermind. I figured it out. My printer now works. Thanks for telling me how to restart cups.
Could you possibly post how you solved it so others reading this thread can benefit from it?

HI THERE UMM I AM TRYING TO USE MY MIRCO SOFT WORD AND THERE IS A QUESTION MARK ON IT AND WONT LET ME OPEN IT

hi i am trying to get on to my mirco soft word and there is a question mark placed on it. when i try to open the app it wont.
help

Which version of OSX and which version of Word?

New user and disgusting features - solveable questions?

Hello all there
I am a new iPod owner, migrated from a hateful 2 year old (now completely broken due to hate) MP3 player, and despite there are some interesting features, I have found some others that are making me considering asking my money back.
Luckily I have no problems regarding USB or other things as a lot of you have experienced, I put the CD first of all and installed everything. No problems installing anything and the device was happily detected as an extraible unit which I liked very much (my previous player appeared as a "thing" instead as a drive)
Its sound is pretty good, I like the sound I get. It's pretty customizable in terms of menus, and some other things like simplicity, despite there are things like the touchpads that I will never like and this is no exception, but this one works finer than any I have tested.
What I don't have liked up to date, and I own it for 2 days (it's november 2nd), are some ugly or very ugly (should I say very very ugly? :D) features it lacks or it's designed to lack of. I like music very much and so I want it to be played the best way a player can provide. I also want players to be simple as a plastic duck mechanism, and somehow this player fills the bill, but not in these cases I want to expose and ask.
1) 10 GB already copied and no album/artist/genre displayed
Of all my media library, consisting of a folder with subfolders and files inside these subfolders (and no 'simple icon' for any program), where I do the things I want, like extracting songs from my CDs and turning them into MP3 files inside folders with the name "Band - Album", I chose folders for a size of 10 GB and, via explorer, copied & pasted on the root of the new drive, the iPod.
No album/artist/genre/simple thing was found when I ejected the drive and started to browse.
I must say, it froze twice before and after the copy. Luckily I knew, from reading the manual, how to make it work again. I expect things to freeze, despite it only shows bad programming from the company.
But I saw the library as before I put it on for the first time. And there are 10 GB of MP3 files.
My first question I asked to myself was: should I use the iTunes? I answered myself: I can't be bothered to be slaved to use a program with a player. That's one of the things I hated from my old player. And this one appears to be a removable drive. Good. But there are 10 GB of MP3 files and I can't play any of these albums.
Somehow I used the iTunes and it started to do things. Like copying a whole folder with my albums (ALL OF THEM!!!!) to the player, or so it seemed to me. Well, first of all I don't want a program to copy everything it wants by simply saying it "This is my media folder where I decide what to be played here" (something like importing library was selected or pushed, I can't remember). I aborted it quickly as I saw the bar. FFS, to have a structured folder of my media doesn't mean I want ALL OF IT inside my player!!! How on earth you want me to select among 3,500 songs if you display them all to me in a complete raw list!!! Anyway, in the process it seemed to copy 3 albums before I stopped (needless to say, these albums were already in the player!!!). 2 were "sorted" and one was "unsorted", I mean, in the correct song order. The "unsorted" was alphabetically done according to WHATEVER so the order was never pure.
I saw folders like Contacts, Notes and so on (what do we do us that don't use Outlook or Outlook Express and want to use these features? "Brilliant" one, designers... ¬_¬ Luckily I don't care about them) so I tried creating an 'Albums' folder and putting albums inside. Same success.
So I asked myself again: are there ID3 tags needed always? The answer is simple: no. Because among these albums there are albums with and without tags. All of them unseen.
My questions thus are these regarding the unavailability issues:
Q1,1: how can I make these albums visible to the iPod?
Q1,2:

... beautiful feature to truncate posts...
It continues here.
... Q1,2: from now on, and for this player, am I a slave to iTunes?
Q1,3: will anybody make a simple program for linux for using these devices? Luckily I have found some tools for Mandrake. But I would appreciate things were less complicated or companies take a look at this market.
Q1,4: will anybodoy make, at once, a choice in a menu that allows the user to NOT TO SORT THE PLAYER BY THE ID3 TAGS??? My classical sort was and is in my 'puters to sort media by folders consisting of "Name of artist - Name of album", be it single, double, triple or quadruple, and inside, files with or without tags. For more than 1 CD albums I use the same folder, with songs named "CD# song_# song title". In these cases there are no tags because the stupid song# tag forces things that uses it to sort albums according to it. In albums like "Gov't Mule - Live... With A Little Help From Our Friends (collectors edition - 4 discs)" I ended up, in my old player, with first playing the first song of each CD, then after these 4 first songs, their 2nd 4 songs, then the 3rd ones... So I wiped the ID tags and finally it was sorted well, so I was happy. Is it so hard to ask for an option like "Do not read ID tags"????????
2) Live albums
I am a fanatic of live albums. I love to listen to them more than any studio album. I have single, double, triple and quadruple live albums I could listen to for hours, and from start to finish, and enjoy them all.
I love to hear the public cheering and screaming, singing the songs, etc etc due to excitement the live albums give. My old MP3 CD player made, and a lot of car MP3 CD players make, a 2-3 seconds pause between songs. As for studio albums, but not for all of them (see Marillion's "Misplaced Childhood") show no problems, but for us that want continuity for albums like live ones, it is a disappointment.
This player puts pauses between songs.
Ok, less than 1 second pause, but I hate pauses. The feeling of the album is broken. There are silences where they shouldn't be. I ended up so excited I had to stop playing it.
Q2,1: can I correct it from the control panel of the iPod or the iTunes? If not, will it be corrected on future updates?
3) The sorting mania
From some time I have seen players sort the albums in numerous ways: by genre, album name alone, artist name, year, etc. etc. etc. So let's suppose I want to make my list, WITHOUT HAVING TO MAKE A FIXED PLAYLIST JUST BECAUSE THESE ARE THE SONGS I WANT TO LISTEN FOR TODAY OR FOR 3 DAYS AND WHO KNOWS WHAT WILL I LISTEN TO NEXT WEEK, of some albums from some different artists. Some of them are simply called "Live" (for example, Golden Earring, Johnny Winter, Foghat, but I don't want to listen to Johnny Winter).
By having sorted it by album name, they would appear as "Live". Which one belongs to who? If I go via Artist, I would have to jump as a frog from artist to artist and then browse their album list. If I go from Genre, I simply dunno because it is so mad I don't want to test it.
Q3,1: If they are sorted my way (full list of albums named in my case "Artist - album 1", "Artist - album 2", but you can sort it the way you want to), I only have to move up and down and click on "Add me this one". Is it possible or must I go the crazy way?
The package is beautiful. The player is also beautiful. Maybe I am a weird user because my demands are not expected. But I am a player user and I have my preferences. Nobody seems to care about people that want no complication. I am seriously thinking about getting my money back any way I can. I am asking friends if they can be interested in getting it because I am so extremely disappointed for an 319 player I want my money back.
Please, people that makes MP3 players, make things easier. Or just think about us and ask us what they would be. There is people that doesn't want any other sort than a simple album list. And that th

SAP-JEE, SAP_BUILDT, and SAP_JTECHS and Dev Configuration questions

Hi experts,
I am configuring NWDI for our environment and have a few questions that I'm trying to get my arms around.
I've read we need to check-in SAP-JEE, SAP_BUILDT, and SAP_JTECHS as required components, but I'm confused on the whole check-in vs. import thing.
I placed the 3 files in the correct OS directory and checked them in via the check-in tab on CMS.   Next, the files show up in the import queue for the DEV tab. My questions are what do I do next?
1. Do I import them into DEV? If so, what is this actually doing? Is it importing into the actual runtime system (i.e. DEV checkbox and parameters as defined in the landscape configurator for this track)? Or is just importing the file into the DEV buildspace of NWDI system?
2. Same question goes for the Consolidation tab.    Do I import them in here as well?
3. Do I need to import them into the QA and Prod systems too? Or do I remove them from the queue?
Development Configuration questions ***
4. When I download the development configuration, I can select DEV or CON workspace. What is the difference? Does DEV point to the sandbox (or central development) runtime system and CONS points to the configuration runtime system as defined in the landscape configurator? Or is this the DEV an CON workspace/buildspace of the NWDI sytem.
5. Does the selection here dictate the starting point for the development? What is an example scenarios when I would choose DEV vs. CON?
6. I have heard about the concept of a maintenance track and a development track. What is the difference and how do they differ from a setup perspective?   When would a Developer pick one over the over?
Thanks for any advice
-Dave

Hi David,
"Check-In" makes SCA known to CMS, "import" will import the content of the SCAs into CBS/DTR.
1. Yes. For these three SCAs specifically (they only contain buildarchives, no sources, no deployarchives) the build archives are imported into the dev buildspace on CBS. If the SCAs contain deployarchives and you have a runtime system configured for the dev system then those deployarchives should get deployed onto the runtime system.
2. Have you seen /people/marion.schlotte/blog/2006/03/30/best-practices-for-nwdi-track-design-for-ongoing-development ? Sooner or later you will want to.
3. Should be answered indirectly.
4. Dev/Cons correspond to the Dev/Consolidation system in CMS. For each developed SC you have 2 systems with 2 workspaces in DTR for each (inactive/active)
5. You should use dev. I would only use cons for corrections if they can't be done in dev and transported. Note that you will get conflicts in DTR if you do parallel changes in dev and cons.
6. See link in No.2 ?
Regards,
Marc

I have a question. For the past week I have not been able to access my iTunes app it always kicks me out. I've turned it off and on and still nothing. I was wondering how can I get it to work or what should I do. Thank you

I have a question. For the past week I have not been able to access my iTunes app it always kicks me out. I've turned it off and on and still nothing. I was wondering how can I get it to work or what should I do. Thank you

You need a computer with iTunes and an internet connection
Try:
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

GRC and CUP and Mobiliity question

Similar Messages

Maybe you are looking for