GRC BRM TCodes of Role cannot be updated

Hi Expert,
I am facing problem in creating role from BRM, while trying to Genearte the role from Generate Stage of Role Methodology. I am getting the error when I click on Generate button under Generate Roles tab.
When I click on Generate button it opens a new screen with stages, 1 Select system and roles 2 Schedule 3 Analysze Risk 4 Confirmation.
In the Analyze Risk stage when I click on Submit button post risk analysis, i get the error "TCodes of Role Z:ECC_Test cannot be updated (System).
Please let me know if anybody is facing issue and have reached to some solution.
Thanking you in advance.
Thanks & Regards,
Jatin.

Hi, Jatin.
I am in SP6 and facing the same issue. SAP tell you something?
In my case the transactions added in pfcg are maintained in SU24.
Also, I am facing an issue when copy authorization from a function in RAR: "Authorization data cannot be updated".
Please, tell me if you have news.
Regads,

Similar Messages

BRM message "Role Description cannot be updated" after generate

Hi SAP experts,
So I’m trying to configure BRM and everything looks good except for when trying to generate the role (single role) I’m getting the error “Role Description cannot be updated”. After doing some research I saw that note 1735705 should address the issue but after
trying to implement the note trough tcode “SNOTE” it comes grey out (message ”Cannot be implemented”) so I'm guessing is not relevant to our system. I can't really find anything else related to a similar issue in the community so I'm wondering what could be the issue here? Any help is greatly appreciated.

Hi Andrzej,
Thanks for the advice; I was so focus thinking that the issue was related to language (Master role data vs Log) or access on my ID that I forgot about tracing the RFC user. The issue was due to missing authorization to manage roles from RFC user. Issue is now fix.

GRC BRM: Update Org Levels of derived roles

Dear GRC experts,
we are using the GRC BRM Master Derived concept and have around 100 Master roles in place.
I understand that the Org Levels of derived roles are only once set per Org Value Map during the initial (Mass) Derivation.
If we add a transation like VA01 to a Master role this also adds some new Org Levels to the Master role. Via "Propagate to Derived roles" the new transaction and object values are added into the Derived roles.
For the new Org Levels these are added also but the values are not the one from the Org Value Map of the Derived role but exactly the same values of the Master Role.
Using "Derived Role Org. values Update" does not help us here to update the corresponding Derived roles as no change to the Org Value Map has been done.
In case a Master role has 40 different Derived roles associated this would require to update manually any of the Derived roles for adjusting the new Org Levels.
Does anybody know how to automate this task?
Many thanks for your help!
Regards,
Markus

Hi Markus Richter
Once you maintain the imparting role and propagate to the derived role, the derived roles will inherit the new org values from the imparting. So that at least has the org values in the derived roles but not the correct values
Next up is to try to use the Mass Maintain Roles to update the derived roles with correct values from the org map (ensure org maps were updated first) mentioned in post
Mass Child role Org value update in GRC 10
Does this work for you as an approach?
Regards
Colleen

Roles are not updating in the GRC 10.0 System.

Hi
We had created Z role in ECC system and Ran the Sync Jobs in the GRC 10.0 System .
But the role created in backend System(ECC) was not updating in the roles of the GRC system.
Can any one provide right solution.
Thanks

Hi Wipro Basis Team
On running the sync job what are you expecting to occur when you say the roles are not updating in GRC System? I wonder if you are expecting a different outcome to the purpose of the sync jobs.
Regards
Colleen

GRC10 AC Role approver not updated

Hi,
We have updated role with new approver and it is updated successfully.When I open role in Role Maintenance and I am able see new approver with role.
When we are raising Access Request for the same role,we are able to find old approver but not the new approver which we have updated.
Please check and advice in this.
Thanks & Regards,
Koteswara Rao.

Dear Koteswara,
you mentioned that you are not using BRM. Anyways, you have imported the roles into BRM and therefore the roles are available. Can you please check the following:
Goto Role Search, open a role which has the wrong approver and show us the following screen:
Check if the role owner is updated accordingly and that "Assignment Approver" checkbox is checked.
If all these is correct than you have to check the role sync job. Run it manually and check if you have some errors.
Looking forward to hear from you.
Best regards,
Alessandro

IPOD cannot be update - 40 GB Click Wheel

Upgraded Itunes & Ipod to latest software versions and can't synch up ipod with Itunes. Have followed ALL steps to recify...uninstall, empty temp directory,standalone Quicktime,reinstall latest. Install goes fine but when I connect Ipod it begins to update from itunes but after about 9G or 2500 songs it says complete (I have over 7500 songs). When I go to update again I get the error message "The iPOD cannot be updated. The disk could not be read from or written to." Please help!

Well it was worth a try...after restoring iPOD, set it up and started auto download from iTunes...once again, everything seemed to be going fine...got up to 2615 songs and it started slowing down while updating ipod and ipod statred making little noises..at 2636 songs it said ipod update complete..my ipod still said do not disconnect so I ejected and still said same thing..no songs updated although it said they had.....reconnected and only 5 songs shoed...clicked on update again and got the message "windows delayed write failed..windows was unable to save all the data for the file G: the data has been lost. This error may be caused by a failure of your computer hardware or network connection. please try to save the file elsewhere....the other message that i have been getting is "This ipod Neil's Ipod cannot be updated. The disk could not be read from or written to"

ERROR MESSAGE: The IPOD cannot be updated.

Please help!! Have tried everything can think of including, resetting, retrying, restarting, reinstalling and restoring. ITunes automatically starts downloading when you connect but then only transfers the first 50 or so songs in the library, and then says update complete. When you ask it to then update the IPOD through file menu an error message comes up saying 'The IPOD cannot be updated, the disk could not be read from or written to.' There is no problem with the IPOD, because I have been able to update it via another PC, it just won't update via the laptop even though the ITunes has been set up on the laptop as the ITunes I want to use.
Click wheel Windows XP

To all concerned: There is a new Apple Support Document regarding this error:
-36 or "Disk cannot be read from or written to" error syncing iPod in iTunes
Maybe this helps.
Alexander.

Ipod cannot be updated....

Ok so I put music on my nano no problem, but when I try to put pictures on it, it gives me the following error message...
The Ipod cannot be updated. The disk could not be read from or written to.
What do I do???

Welcome to Apple Discussions!
Are you transferring pics from a folder or through a program?
btabz

When I update my nano ipod I get an error message "User ipod cannot be updated. The disk couldnot be read from or written to." How can I overcome this error message.

In the iTunes window, when I update my nano ipod, I get an error message "User ipod cannot be updated. The disk could not be read from or written to." How can I overcome this error message.

Hello there dilip77707,
It sounds like you are getting this error message that your iPod cannot be read from or written to when you are trying to update your iPod Nano. I recommend the troubleshooting from the following article to help you get that resolved. Its pretty straight forward, just start at the top and work your way down as needed:
'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
Thank you for using Apple Support Communities.
All the very best,
Sterling

"cannot be updated because Itunes selected no longer exist"

Hello. When I hooked up my Ipod for the first time it sucked up the 800+ MP3 files from My Music folder. Now I want to update my library and delete them all from the Ipod (not my hard drive) and start over with songs from the Itunes folder.
I unchecked all of the songs in the library and reconnected, but it will not delete them and I get this error message:
"Cannot be updated because one or more of the Itunes playlists selected to update no longer exist"
I'm thinking I need to "reboot" the Ipod and clear out the memory but I don't know how. Or somehow figure out how to get around this error. Can anyone help???
Thanks!

Have a look at this.
http://discussions.apple.com/thread.jspa?threadID=121728&tstart=150

Songs on the iPods "administrators iPod" cannot be updated because all of t

When I try to update my mini iPod I get the following message. Songs on the iPod "administrator's iPod" cannot be updated because all of the playlists selected for updating no longer exists.
Any thoughts on where they have gone? what should I do?

Have a look at this post by forum member Hudgie it may help explain things: Hudgie - iPod cannot sync because one or more playlists are missing

Songs on Owner's ipod cannot be updated because playlists no longer exist

I recently uploaded new CDs into my itunes library. When I tried to sync it said that it could only sync an owner's selection. I agreed because I was in a hurry. Later I came back to delete some of the songs that I do not use and I get the message "Songs on Owner's ipod cannot be updated because all of the playlists selected for syncing no longer exist." I tried to delete some of the unused playlists and now my ipod is blank with not a single song on it. I want to get my playlists back and my music back.

You will have to create a couple of new playlists to use to sync your iPod, then your iPod preferences will need to be change to sync on those specific playlists.

"Songs on iPod 'jerm' cannot be updated because all of the playlists..."

I recently bought a 1GB iPod Nano from a dude on craigslist and I updated it once, but when I try to update it now a message comes up that reads:
"Songs on iPod 'jerm' cannot be updated because all of the playlists selected for updating no longer exist."
Also, when I updated it yesterday, it said that the iPod didn't have room for all of the songs on my iTunes...but I only have like 75 regular-length songs on there and the 1GB is supposed to hold 240. Anyone know what's up with that?
After it informed me of this last thing, it made me a playlist of a "selection" of songs from the iTunes and updated it with those.
I deleted that playlist today...may that be related to my first question?
All of this doesn't make sense. Can anyone shed a little light on the subject?
Thanks
Sony VAIO Windows XP

I had this problem with my 4GB iPod nano and I tried everything that you said to try. I did accidentally delete the iPod Selection playlist and I tried to make a new smart playlist. When I did this I got an error message that said "The smart playlist contains one or more conditions which are empty of conflict with one another. This will result in never matching any item. Are you sure you want to save this playlist?" I tried to upload an old library onto my iTunes and it was successful, however, my iPod would still not sync. Do you know what i can do to fix this?
thank you.

"Songs on the iPod "____" cannot be updated because all of the playlists...

"Songs on the iPod "Harold Kim's iPod" cannot be updated because all of the playlists selected for updating no longer exist."
Im not sure what this means or how to fix it. any sort of advice or help would be greatly appreciated.

You get this problem when the option 'Sync Music - Selected playlists' is being used to sync your iPod. If the playlist selected is deleted from iTunes the iPod no longer has a location to sync from and you get an error. (Syncing selected playlists by the way is a useful setting to use when the iPod is smaller than the iTunes library). However you can make a new one or make use of an existing one.
Open iTunes and create a playlist to update your iPod from, call it -My iPod for example (the dash will position it at the top of the playlists in Sources). You can make it a smart playlist that picks the songs for you or just a normal one and drag whatever content you want to have into the playlist. If you are making a smart playlist limit it to just less than the size of your iPod (for example 3700MB for a 4G iPod Nano. Now connect your iPod and when it appears in the Source list click on the iPod icon to bring up the preference tabs in the main pane. Go to the Music tab and choose Sync Music and the Selected playlists radio button. Choose the playlist you just made from the selection and click Apply. You can also sync from any existing playlists by choosing the same setting, you just need to make sure that the size of the playlists don't exceed the capacity of your iPod:
How to create a Smart Playlist with iTunes
Syncing Music to iPod
To make a random playlist go to File>New Smart Playlist.
Uncheck "Match the following rule"
Check "Limit to" put "3700" in the number box, choose "MB" from the first list box, choose "Random" from the next list box. Check "Live Updating"
When you want to change the selection in the smart playlist just delete everything in it and it will add a new selection. When you want to change the normal playlist just delete out what you don't want and drag in a new selection.
Syncing selected playlists is just like syncing your whole library only on a smaller scale and more "selectively". When your iPod is is set to sync selected playlists it automatically picks up any changes you made to that playlist in iTunes since you last connected. Anything you added to the playlist will be added to the iPod, anything you deleted from it will be deleted from the iPod. In other words the iTunes playlist and the iPod are kept "in sync".

Songs on the iPod cannot be updated beaucse all of the playlists .....

I was trying to update my ipod and my ipod only has 52 songs but my libary has 92 songs. i tried to updated it by left clicking where it said my "RISHI"S IPOD" and clicked update...and this message said "Songs on the iPod "Rishi's iPod" cannot be updated becuase all of the playlists selected for updating no longer exist."
HELP PLEASE WHAT DO I DO!!????

This should sort out your missing playlist problem: Hudgie - iPod cannot sync because one or more playlists are missing

GRC BRM TCodes of Role cannot be updated

Similar Messages

Maybe you are looking for