GRC Compatible with other SAP Systems

Hi experts,
I’m trying to understand the compatibility of GRC (BRM, EAM, etc.) with other SAP systems.  The question came after looking at some of the configuration from SRM since I see the GRC Plug-In component installed in the system but then I don’t see the actual plug-in on SPRO.  I was looking for similar information on the GRC installation guide and Config. Guide but so far no luck.  Can someone point me in the right direction? Even better if there is an official document.  Thanks

Hello Jonathan,
According to the installation guide of the latest release of GRC 10.1:
Install SAP solutions for governance, risk, and compliance (GRC) 10.1
on a standalone system as opposed to installing them along with an SAP
Business Suite or with any SAP Business Suite components such as
ERP, SCM, CRM, OR SRM.
The cause of the problem is because the SRM/APO system IMG root node is
different from SAP Basis IMG root node. So for the customizing SPRO
to show up for GRC under SRM system, you'd have to check the node as
described in note 1591667.
Best Regards,
Fernando

Similar Messages

  • Installation with other sap system

    Hi people,
    I want to know if there is any problem when installing an SAP system, a machine that already has an installed system. The likely impacts of drawbacks I should consider.
    More thanks

    This is not as problem as long as the box has enough resources...  What systems are you planning to install?... Drawbacks usually are related to the systems sharing the same DB... so basically if any maintainance is done at DB level that require a DB restart then both systems will have to go down...
    Also let me mention that this is not a good scenario in a production system... but is perfectly fine in a DEV, QAS environment.
    Regards
    Juan

  • If SAP FICO as standalone system with other legacy system.

    Hi All,
    If SAP FICO as a standalone sytem with other legacy systems what is the impact on the SD module.
    For eg: what we will miss or cant do the transcations with the SD perspective in SAP.
    Thanks
    ANGKS

    Hi,
    1. Yes all the dat needs to be copied
    2. You can just assign the users in your orginazation structure to the profiles(Master data specialist, steward etc.) in BRF+
    3. After copying the data to your standalone ECC 6.0 instance, all the process of data governance happens on your standalone system and once it is done you can replicate the data to your SAP 4.7 system. According to my experience, no functionalities will be missing.
    Regards
    Goutham Kanithi

  • How to integrate the portal system with non-sap system

    Hi Gurus,
    How to integrate Portal system with non-SAP system?
    I know few ways .......Using Usermapping UIDPW method.
    Using Appintegrator .....and using Business repository objects in JCA?
    Is there anyother way to integrate if so please give me the names and steps for integrating it?
    Thanks in Advance,
    Dharani

    Hi Dharani,
    You can get information from the following links:
    http://help.sap.com/saphelp_nw04s/helpdata/en/43/d08b00d73001b4e10000000a11466f/frameset.htm
    https://www.sdn.sap.com/irj/sdn/thread?threadID=744043
    SAP CONNECTORS:- Basically Connectors are like middlewares , that we use to connect to the backend system including Non SAP systems also. Will try to explain it to u with some examples of SAP Connectors:-
    a) SAP Business Connectors:-
    A middleware application based on the B2B integration server from webMethods.
    The SAP Business Connector enables both bi-directional synchronous communication and asynchronous communication between SAP applications and SAP and non-SAP applications.
    The SAP Business Connector makes all SAP functions that are available via BAPIs or IDocs accessible to business partners over the Internet as an XML-based service.
    The SAP Business Connector uses the Internet as a communication platform and XML or HTML as the data format. It integrates non-SAP products by using an open, non-proprietary technology.
    b) SAP Java Connector:-
    SAP Java Connector (SAP JCo) is a middleware component that enables the development of SAP-compatible components and applications in Java. SAP JCo supports communication with the SAP Server in both directions: inbound calls (Java calls ABAP) and outbound calls (ABAP calls Java).
    SAP JCo can be implemented with Desktop applications and with Web server applications.
    SAP JCo is used as an integrated component in the following applications:
    1) SAP Business Connector, for communication with external Java applications
    2) SAP Web Application Server, for connecting the integrated J2EE server with the ABAP environment.
    SAP JCo can also be implemented as a standalone component, for example to establish communication with the SAP system for individual online (web) applications.
    To Know more go through,
    SAP Java Connectors
    II) ALE Concept:-
    ALE is not restricted to communication between SAP systems, it can also be used for connecting SAP Systems to non-SAP systems.
    By using IDocs as universal information containers, ALE can reduce the number of different application interfaces to one single interface that can either send IDocs from an SAP system or receive IDocs in an SAP system.
    SAP certified Translator Programs can convert IDoc structures into customer-defined structures.
    Alternatively, the RFC interface for sending and receiving IDocs can be used in non-SAP systems.
    In both cases you need the RFC Library of the RFC Software Development Kit (RFC-SDK).
    This link gives a great insight into landscape for Connectivity to Non-SAP systems:-
    SAP to Non-SAP systems
    III) Communication Between SAP Systems and External (Non-SAP) Systems using RFC:-
    When you use RFC for communication with an external (non-SAP) system, you can also implement the SAP Java Connector or the SAP .Net Connector for the conversion of data. However, there are no specific security requirements for these components, since they only perform internal system conversion functions.
    The additional security recommendations for communication with external systems in this section make particular reference to cases where an external system is used as a server (SAP calls the external system). If you use an external system as a client (the external system calls SAP), the appropriate SAP-specific security mechanisms are implemented on the SAP side.
    This link explains in detail all the security considerations you need to take for connecting to an External Non SAP system like, User administration, Network Security etc.
    Communication Between SAP Systems and External (Non-SAP) Systems using RFC
    Hope this helps,
    Regards,
    Rudradev Devulapalli
    Reward the points if helpful

  • Firefox prompted me to download an incompatible update that its website claims is compatible with my operating system (Mac OS 10.4.11). Why prompt an incompatible download AND claim it is compatible?

    I have an iMac and use OS 10.4.11 & Firefox 3.6.19. Firefox prompted me to download an update (to 7.0.1). I looked up the system requirements on your website, and it stated the update is compatible with OS 10.4.11. But after I downloaded and installed the update, it failed to work on grounds of incompatibility. Hence 2 questions: (1) Why did Firefox prompt me to download an incompatible update? (2) Why did your website claim the update is compatible with my operating system when it is not?

    Sorry, it's because Firefox 4+ are only compiled for the Intel processors.
    There is a separate project for PPC Macs called Ten Four Fox. You might give it a spin when you're tired of 3.6.
    http://www.floodgap.com/software/tenfourfox/

  • I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I d

    I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
    Thanks for your help.
    George Kyaw
    <Email Edited by Host>

    I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
    Thanks for your help.
    George Kyaw
    <Email Edited by Host>

  • How to find the list of  different material in other SAP system.

    We have two SAP different systems.  there is an integration between two systems.
    One system has 2 millions materails (parts) and other system has 6 millions materails (parts).
    I need to know the list of what are those 4 miilions of materials in the other sap system .
    How can I find out the list of the 4 millions additional material list  ?
    Can you please help me .
    YOUR HELP WILL BE HIGHLY APPRECIATED.
    Thanks in advance.

    Hi,
    Compare two different environments/systems in t.code: SCU0 . Also you can try with OY19
    Regards,
    Biju K

  • Why does it say that the updated version of Firefox (which I am trying to download) is not compatible with my operating system when I have Mac OS X 10.5.8?

    Why does it say that the updated version of Firefox (which I am trying to download) is not compatible with my operating system when I have Mac OS X 10.5.8? I had an older version of Firefox and it said I needed to update it but that was the message that appeared.

    Sorry, it's because Firefox 4+ are only compiled for the Intel processors.
    There is a separate project for PPC Macs called Ten Four Fox. You might give it a spin when you're tired of 3.6.
    http://www.floodgap.com/software/tenfourfox/

  • I am using OS 10.4 on my iMac. how do I get an earlier version of Firefox, which would be compatible with my operating system?

    I am using OS 10.4 on my iMac. how do I get an earlier version of Firefox, which would be compatible with my operating system?

    Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html
    * http://www.mozilla.com/firefox/3.6/system-requirements/

  • Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 but when I connect my camera a message appears telling it's not compatible with the operating system?

    Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 and when I have checked for software updates there are none available.  I've downloaded the Canon software, connected to my mac via the cable and followed the instructions in the manual.  Sadly I just get a message saying it's not compatible with the operating system.  I've tried inserting the memory card into the mac to and it doesn't seem to see it.  Can anyone help please?

    Camera RAW ≠ Camera driver, the RAW update is for the .CR2 canon raw image file (in your case) compatibility.
    What happens when you try to import photos using Image Capture or iPhoto?
    Can you take a screenshot of the error message?
    I always prefer and recommend using memory card import over using the camera.

  • IDoc adapter with Non SAP systems

    SAP XI 3.0 help says:
    You can use the IDoc adapter to connect SAP systems (as of release 3.1) and non-SAP systems with the Integration Server using native IDoc structures
    What does this mean?
    -Naveen.

    Hi Naveen,
    Let me give a use-case in one of our projects ....we have 2 middlewares in our landscape...webmethods and XI...and in one particular instance there was a need to send an FI IDoc from webmethods to XI and forward it to R/3....
    In this case, the webmethods was treated like any other sap system for receiving IDoc into XI(with settings in IDX1)...
    Hope this might clarify a little bit...
    Thanks,
    Renjith

  • Data transfer using EDI from one SAP system to other SAP system

    Dear all,
    I understand that i should use normal ale-idoc features to transfer data from one sap to other sap system.
    but can i transfer those idocs using EDI from one SAP to other SAP system

    Hello,
    surely you can do so.
    EDI means that you transfer data in standardized EDI-formats. To get the data at the source  into that formats you normally use an EDI-Converter, which maps the IDOC-format into the EDI-format. Then you send the data in EDI-format to an EDI-converter at the target. There's the reverse mapping. You map the EDI-Format into IDOC-format and book these IDOCs into SAP.
    I think this makes only sense if you cross organizational borders within the business process, e.g., if you define an exchange with many customers, but not all of them have an SAP-system. 
    Regards Wolfgang
    Edited by: Wolfgang Valtin on May 19, 2009 6:13 PM

  • How to copy role from R/3 to BW and other SAP systems

    hello all,
    I have created a role in R/3 dev systems, Now the requirement is I have to create same role in BW, GTS etc
    Is there a way I can copy or transport the request from R/3 dev to other SAP systems. I am asking this becuase this role is kinda messy with lot of auth objects and it will take me lot of time to create it fresh in other systems.
    Thanks in advance

    You can transport the role ur use download/upload. You reach all of these function in the menu on the entry screen of transaction PFCG.
    Kind regards
    Frank Buchholz

  • How to add other SAP systems in CCMS ALE Monitoring

    Hi all, how do I add other SAP systems to be ALE monitored centrally in the PI system?
    I want to monitor the Idocs in the SAP R/3 system centrally in PI with CCMS. Default is only ALE for the PI system itself.

    You can add additional systems to CCMS quite easily.
    I would recommend this to be done in Solution Manager though!
    http://help.sap.com/saphelp_nw04s/helpdata/en/c8/40a442b024b211e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
    Also, search Google for SAP CCMS Central monitoring.

  • Connectivity of BODS with other ERP systems

    Hi All,
    Need your help.
    Can BODS connect with other ERP systems such as Lawson, Oracle EBS, Symix, MAPICS and Fourth Shift using adapter or anything?
    Please Help.
    Thanks Much,
    Purnima

    Hi  Purnima Rai,
    Hope the below link will help you out .
    https://websmp106.sap-ag.de/~sapidb/011000358700000441762013E
    Regards,
    Akhileshkiran.

Maybe you are looking for