GRC CUP - How to change SNC Name to lower case during user creation.

Hi All,
We are using GRC 5.3. CUP automatically creates user in R3 but SNC p:username'@'DOMAIN.COM is in upper case.
1. During automated user creation.
2. How change default DOMAIN.COM to lower case "domain.com"
Currently we have to manually change is via SU01 after user has been created.
Thank you
Regards,
Jacky

Sorry please ignore this thread. I got the wrong details. Post cancelled

Similar Messages

How to change the "name of column" property of an text item in runtime?

How to change the "name of column" property of an text item in runtime?
I look the properties of items in help and found nothing about this!
It's possible?

Hi,
an other solution is change the block property QUERY_DATA_SOURCE_TYPE from "Table" to "Sub-query" , than change at run time the property QUERY_DATA_SOURCE_NAME.
First create block and add items
The QUERY_DATA_SOURCE_NAME will be for ex. "Select 'A' as col1, 'B' AS col2, 'C' as col3 from dual"
Set into items the column name property to col1 , col2 ...
At run time change the query to "Select 'Z' as col1, 'X' as col2 , 'Y' as col3 from dual"
in this way you can change the source of column value.
Caution because if you change value type from varchar2 to date you must cast date into varchar2.
May be that this way is valid only for view data not for insert-update, i don't remember.
bye
Message was edited by:
Killernero

How to change host name for management agent.

Hi,
I 've installed management agent for oracle, it's a part of Oracle Management Framework, but I have to change host name.
I know how to change port number, but I've no idea how to change host name.
Have you got any idea?
Thank you in advance.
Matin

Hi,
you can change it in System Landscape directory.
Go to the http:yourportal.com:50000/sld
then click on the Landscape and update the new host name.
Raghu

How to change the name of a BADI Implementation?

Hello experts,
Does anyone knows how to change the name of the BADI Implementation? I just create a new Implementation but we need to rename it.
Thanks in advance,
AK

Hi,
Please go to transaction SE19, enter your implementation name.
Then go to menu: Implementation -> Rename -> ...
Regards,
Ferry Lianto

How to change you name in iCloud

My dad regestard my iPad onto his name then I had to change my name on iCloud because when I send email on my iCloud email address it says Philip on it. I don't want people to laugh at me so I changed it my name now my dad got me an iPhone and he regestered it on his name and in my iCloud email it says Philip instead of sofia I want my iCloud email address to have my name on it not my dad's I can't remember how to change the name. Please tell me or I will never use my iCloud email address ever again.

I have the same problem, and I trued doing what you did and change my name but it still doesn't say my name(I'm a girl and the name is a guy's)

Will someone please tell me how to change the name of a folder I created in Pages and saved to the cloud?

Will someone please tell me how to change the name of a folder I created in "Pages" and saved to the "Cloud"? Thanks.

Go to the open dialog in Pages and select iCloud.
Click on the folder that you created on iCloud to open the folder.
On the lower half of the window (the open folder) click on the name of the folder.
Once you click and select the folder's name it should be editable.

How to change datasource name based on the partition in configplan

Hi
Can any one please give me some solutions regarding how to change datasource name based on the partition in
configplan.
can't we do this in configuration plan?

If you want to change template based on parameter. you have to use below syntax
v_layout boolean
V_LAYOUT:= FND_SUBMIT.add_layout(template_appl_name => 'SQLAP' -- application short name
,template_code => 'HUBAPAPN' -- template name
,template_language => 'en'
,template_territory => '00'
,output_format => 'PDF');
Above can be used in plsql stored procedure before submitting Concurrent Program (Bi Publisher report) or may be you can try to add this code in Oracle reports after report or before report trigger
Thanks
Kamalakar

How to change the name of column in ActionScript?

I possibly know how to change the name of the column in DataGrid using mxml but dont know how to change the name of column in DataGrid using ActionScript.
var newDataGrid:DataGrid=new DataGrid();
newDataGrid.dataProvider=arrayCollection():
It takes the default names from arraycollection but I wanted to give any column names which I want through ActionScript.
Please HELP!

Give your datacolumn and id. Then set the property for that column through the datacolumn id.
DataGridColumn id="nameDC"
Script:
nameDC.headerText = "Name";

HT204053 Our Apple ID is ok and functioning. However, I just came on as the IT for the group and cannot find how to change the name.

Our Apple ID is ok and functioning. However, I just came on as the IT for the group and cannot find how to change the name.

Assuming you mean the personal name associated with the account, as opposed to the login (which you can change if it's not an @icloud.com. @me.com or @mac.com address) you can change this at http://appleid.appla.com . Click on 'Manage your account' and then on 'Edit' next to 'Your name' and the name currently associated with the ID.

Can anyone tell me how to change the names of the networks I have set up on Airport Express

Can anyone tell me how to change the names of the networks I have set up on Airport Express please? I now work in a UN compound and my network is my own name, would prefer some anonymity so seeking to change the wifi network name that others might see.

Hi mkl1961,
Happy Holidays! The article below will explain how to reset your Airport Express and change the network and base station names back to their defaults.
Resetting an AirPort base station FAQ - Apple Support
http://support.apple.com/en-us/HT3728
What default settings will my AirPort base station have after a hard or factory default reset?
AirPort base stations are set to request an IP address by DHCP.
AirPort base station passwords are "public."
AirPort base station names revert to "base station xxxxxx," where xxxxxx is the last six digits of the wireless MAC address*.
AirPort base station network names are "Apple Network xxxxxx," where xxxxxx is the last six digits of the wireless MAC address*.
*A MAC (Media Access Control) address, also known as a "network ID," is a unique hardware identification number for a network port. You can find the wireless and Ethernet network IDs on the printed label on the bottom or side of the device.
Airport Express Setup Guide
manuals.info.apple.com/MANUALS/1000/MA1613/en_US/airport_express_80211n_2nd_gen _setup_guide.pdf
I hope this information helps ....
- Judy

How to Change Computer Name

Two questions...the first is to find out how to change the name of a computer. When I pulled data of of my previous Mac, the name stuck onto the new one.
Secondly...an old email address keeps popping up in my keychain. Anyway to get in and delete that?
Thanks for any help.

I recently added another iPhone to the Mac inventory and up initializing, it asked if I wanted to make a certain email address my default. I've not used that address for quite a while. I've seen this address pop up a couple other places too, so I'm wanting to retire it for good.
Thanks for you help on the first question.

How to change of NAME and IP after RAC installation.

Hi Friends,
I have a challenge here...Would appreciate if anyone can help me..
I have to install 10.2.0.3 Oracle RAC on windows 2003 server 64 bit.
My issue is now the server names and ips are set and I am going to install the RAC.
But the client need is that after one month, they need to change the names and ips of the servers (a one time change).
Because according to their server naming standards, current production servers are having the acceptable names and ips.
The installation was on a 32 bit OS, so they are facing out of process memory errors. Thats why they are going to 64 bit OS on new servers.
After the new servers are ready, the data will be migrated to new server. After a month, they need to change the names of new servers to that of the old (current production) servers.
Could anybody help me by giving me information about how to change the NAME and IP after a RAC installation ?
Any metalink notes or commands as it is........
Thank you,
Mahesh.

Hi,
You can change the IP later but you can not change the hostname of the system.
You have to install CRS freah if you want to change the hostname of the system.
Please let us know which IP you want to change.
You can see the metalink Note.276434.1 for VIP or VIP hostname change.
Regards,
KK

How to change the Default login script and the USER login script in Netware3.12

I need to cut down the disk map from Neware 3.12 in Win98 client's PC.
please tell me
how to change the Default login script and the USER login script in
Netware3.12 ?
Or is there any other ways to do this thing?
Thanks a lot!

On 4/6/2006 [email protected] wrote:
> how to change the Default login script and the USER login script in
> Netware3.12 ?
Please repost in the discontinued.forums.
Edison Ortiz
Novell Product Support Forum SysOp
(No Email Support, Thanks !)

How can I change a column to lower case?

I selected an entire column and discovered that it's already set at Format > Font > Capitalization > None
If I change "None" to "All Caps," it capitalizes everything. But when I change it back to "None," letters that were originally capitalized remain capitalized. How can I change EVERY letter in a column to lower case?
Thanks.

Format > Font > Capitalization changes how the text is displayed. But it doesn't change the actual text.
To change all letters to lower case you can use the LOWER() function in cells that refer to the original text. Then select the cells with the formula displaying the "recapitalized" text, command-c to copy, and Edit > Paste Formula Results to remove the formulas.
SG

How to change the status of test cases in Test Plan from Design to Ready using Excel VBA

HI,
How to change the status of test cases in Test Plan from Design to Ready using Excel VBA

Thanks Florin,
Your piece of code has worked alot, and it was very helpful in changing the Status of the Workitem to "READY" for all the Users fo the workitem.
Points have been rewarded for your help.
Process: We have acheived this using the "Work Item Exits", Usng "AFTER_EXECUTION" Method.
Note: The Exit will be executed if "exit_cancelled" statement is present/used in the work item method. if not it is not taking to the exit code. I'm unable to find the reason for it. Florin can u please explain this point.
Please check the link for adding the code in Work Item Exits.
http://wiki.sdn.sap.com/wiki/display/ABAP/ProgramExitsIn+Workflow
Please find the Code:
method IF_SWF_IFS_WORKITEM_EXIT~EVENT_RAISED.
Get the context of the workitem
me->wi_context = im_workitem_context.
After execution of the workitem call the method AFTER_EXECUTION
if im_event_name eq swrco_event_after_execution.
    me->after_execution( ).
endif.
endmethod.
METHOD AFTER_EXECUTION.
This method acts as the Event Handler for SWRCO_EVENT_AFTER_EXECUTION
DATA: LCL_L_WID TYPE SWW_WIID,
        L_STATUS TYPE SWR_WISTAT-STATUS,
        L_NEW_STATUS TYPE SWR_WISTAT,
        L_SWR_MESSAG TYPE STANDARD TABLE OF SWR_MESSAG,
        L_SWR_MSTRUC TYPE STANDARD TABLE OF SWR_MSTRUC.
Get work item
CALL METHOD WI_CONTEXT->GET_WORKITEM_ID
    RECEIVING
      RE_WORKITEM = LCL_L_WID.
L_STATUS = 'READY'.
CALL FUNCTION 'SAP_WAPI_SET_WORKITEM_STATUS'
    EXPORTING
      WORKITEM_ID    = LCL_L_WID
      STATUS         = L_STATUS
      USER           = SY-UNAME
      LANGUAGE       = SY-LANGU
      DO_COMMIT      = 'X'
    IMPORTING
      NEW_STATUS     = L_NEW_STATUS
     RETURN_CODE    = SY-SUBRC
    TABLES
      MESSAGE_LINES = L_SWR_MESSAG
      MESSAGE_STRUCT = L_SWR_MSTRUC.
IF SY-SUBRC EQ 0.
ENDIF.
ENDMETHOD.
Thank You Once Again,
Ajay Kumar Chippa

GRC CUP - How to change SNC Name to lower case during user creation.

Similar Messages

Maybe you are looking for