GRC Languages
Hi All,
I have notice that during the activation of the BC sets, there are 6 langauges (English, German, Portuguese, Japanese, French, Spanish) available in the table content of a transport.
I've installed and activated the BC sets in 3 backend systems, which does prompt me for a transport request during activation. This was done successfully but upon check the transport contents, I found out that 2 of the systems transport contains all 6 languages with the last system having only 1 language (English).
As I will be using the transport function for the activation of the BC sets acorss my system landscape, I would like to know what is the impact of having just one language (English) and not having the rest of the languages. Also does GRC AC really use all 6 languages or English is sufficient to get GRC AC (meaning FF, CC and AE) running.
I would appreciated if someone can provide me with the info as soon as possible.
Thanks.
Raymond
Hi Raymond,
I think if your Company only uses English as language for SAP GRC, then its fine otherwise you may have to redo it again.
I think English would be sufficient as a language for all SAP GRC applications unless, your company is globally setup and if SAP GRC CUP approvals and requests in the Security Workflow, SAP GRC RAR rule set texts will be used by multiple people across locations.
Regards,
Kiran Kandepalli.
Similar Messages
-
GRC 10.0 Notifications in Multiple Languages
Hello GRC Gurus,
In my Organization, We have a requirement to support French Language due to legal requirements in the Quebec provinvce. This means that all notifications to users in the Quebec province will have to be delivered in French.
I have researched this in as far as:
French Language has to be implemented as a prerequisite in SMLT
The standard notification templates will be available in French language once the language pack is installed
The issue i have here is:
can the notifications be sent to different sets of users in different languages? I see that that one message class can only be associated with one document object. Is there a way to get around this to define who will get the notification in French and who will get it in English probaly based on USER GROUP or DEFAULT LANGUAGE
Ofcourse, the message documents can be modified to present it in both English and French to make it easier but in future if there are legal requirement in others countries it does not make sense to keep adding the message body in all the required languages
Can you please help?
Regards,
PrashantHi Prashant,
I was looking into a similar requirement and came to the early conclusion that GRC is not smart enough to handle multi language notifications.
The reason why I say this is that whilst you can create multiple documents in SE61 in different languages, it looks like you can only create a single message class that gets aligned into MSMP, i.e no choice of multiple languages there.
What I am unsure about (as I have never bothered to investigate it) is the "message number" column in the "Variables & Templates" section of MSMP. I am unsure if you can send a number of messages for the same template and message class.
Also, I am unsure how GRC checks the user's logged in language and selects the document template.
Have you considered having the content of the email contain dual languages? i.e. first paragraph in English, second in French etc? -
GRC: Maintenance of multiple languages
Hello Experts,
I have maintained multiple languages in my GRC system in the 'Maintain Supported Languages' setting. But, these act as additional language in case the logon language is not available.
Is there any way to have multiple languages working simultaneously on the same GRC client.
Thanks in advance.
Best Regards,
HimanshuHi Maheswaran, thanks for the quick reply
I've few quarries here regarding your quote on creating single operation for each equipment.
My task list consists of say 6 operations,
Operation #
Description
10
power off
20
check power connections
30
replace seal
40
check impeller
50
check coupling
60
Lubricate the bearing
these need to be performed onto a pump maintenance with a strategy of 1M,3M & 12M (defined under maintenance package selection into task list).e.g. 10,20,30 (under 1M), 20,40,50,60 (Under 3M) and 20,60 (under 12M)
In this case, how's it possible to define one operation for one equipment (as stated in below quote)
Seeking for your expert comment ..
Thanks .. -
Notification in other languages (GRC 10)
Hi experts
I need your help, i have to configure the msmp notifications but i need them in spanish, because my users are using GRC AC in spanish.
I tried to configure de document object in SE61 in spanish but the system does not allow to create them in spanish. Then i logged on in spanish and configured the notifications but when i test them the log is sending the following error " Body document "name of the document" not found" (the document exists created and activated in english)
Help, please.
Approved by COCHOA at Path NEW_PATH and Stage BPO_UEN 15.12.2011 22:31:17,2473040 NEW_PATH 15.12.2011 19:55:59,7331210 0 0 COCHOA 557
Sending notifications for NEW_WORK_ITEM for instance 4EE9208CE8D10C80E100800094F91EAF, path NEW_PATH, stage 004 15.12.2011 21:43:08,1676580 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 159
Calculating notifications for NEW_WORK_ITEM for instance 4EE9208CE8D10C80E100800094F91EAF, path NEW_PATH, stage 004 15.12.2011 21:43:08,1667910 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 158
Failure when sending notification for event NEW_WORK_ITEM (template GRAC_AR_NEW_WORK_ITEM) 15.12.2011 21:43:08,1661210 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 252
Body document "YGRAC_MSMP_AR_NEWWORKITM_ES" not found 15.12.2011 21:43:08,1583560 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 1
Sending notifications for NEW_WORK_ITEM for instance 4EE9208CE8D10C80E100800094F91EAF, path NEW_PATH, stage 004 15.12.2011 21:43:08,1567410 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 159
Retrieved rule result: Template ID 'GRAC_AR_NEW_WORK_ITEM', Variable 'USER_LAST_NAME', value 'cordoba' 15.12.2011 21:43:08,1489300 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 258
Retrieved rule result: Template ID 'GRAC_AR_NEW_WORK_ITEM', Variable 'USER_ID', value 'NEWUSER' 15.12.2011 21:43:08,1483630 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 258
Retrieved rule result: Template ID 'GRAC_AR_NEW_WORK_ITEM', Variable 'USER_FULL_NAME', value 'magaly, cordoba' 15.12.2011 21:43:08,1477990 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 258
Retrieved rule result: Template ID 'GRAC_AR_NEW_WORK_ITEM', Variable 'USER_FIRST_NAME', value 'magaly' 15.12.2011 21:43:08,1472370 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 258
Retrieved rule result: Template ID 'GRAC_AR_NEW_WORK_ITEM', Variable 'SUBMISSION', value ' GRQDEV140_MERDEV113 sistema añadido a usuario NE' 15.12.2011 21:43:08,1466510 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 258
Retrieved rule result: Template ID 'GRAC_AR_NEW_WORK_ITEM', Variable 'STAGE', value 'BPO_UEN' 15.12.2011 21:43:08,1459920 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 258
Retrieved rule result: Template ID 'GRAC_AR_NEW_WORK_ITEM', Variable 'SENDER', value 'WF-BATCH' 15.12.2011 21:43:08,1373860 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 258
Retrieved rule result: Template ID 'GRAC_AR_NEW_WORK_ITEM', Variable 'REQUEST_TYPE', value 'Crear usuario SAP' 15.12.2011 21:43:08,1368310 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 258
Retrieved rule result: Template ID 'GRAC_AR_NEW_WORK_ITEM', Variable 'REQUESTER_NAME', value ',VFRANCO' 15.12.2011 21:43:08,1362420 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 258
Rule V/F/GRAC_NOTIF_VAR_RULE_AR returned results 15.12.2011 21:43:08,1086540 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 98
Rule V/F/GRAC_NOTIF_VAR_RULE_AR executed 15.12.2011 21:43:08,1077150 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 96
Rule V/F/GRAC_NOTIF_VAR_RULE_AR is executing ... 15.12.2011 21:43:07,5368140 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 94
Rule V/F/GRAC_NOTIF_VAR_RULE_AR was validated 15.12.2011 21:43:07,5360890 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 93
Rule V/F/GRAC_NOTIF_VAR_RULE_AR is being validated ... 15.12.2011 21:43:07,5085370 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 92
Rule V/F/GRAC_NOTIF_VAR_RULE_AR - line items converted to type GRAC_T_REQUEST_RULE_LINE 15.12.2011 21:43:07,5077690 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 102
Rule V/F/GRAC_NOTIF_VAR_RULE_AR - request header converted to type GRAC_S_REQUEST_RULE_HEADER 15.12.2011 21:43:07,5066240 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 101
Rule V/F/GRAC_NOTIF_VAR_RULE_AR; checking input parameters ... 15.12.2011 21:43:07,1454520 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 95
Calculating notifications for NEW_WORK_ITEM for instance 4EE9208CE8D10C80E100800094F91EAF, path NEW_PATH, stage 004 15.12.2011 21:43:07,1182400 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 158
Calculating notifications for NEW_WORK_ITEM for instance 4EE9208CE8D10C80E100800094F91EAF, path NEW_PATH20111215195559.7331210, stage 4 004 15.12.2011 21:43:07,1170780 NEW_PATH 15.12.2011 19:55:59,7331210 4 4 TS76308026 WF-BATCH 158What do you mean by themes in other languges? If you just want to change the text you can type the Spanish in yourself. But all the themes I know of don't have English in the backround.
-
Error GRC Access Control 10.0
We have a problem when execute the next steps in GRC Access Control 10.0
SPRO-->Governance, Risk and Compliance>Access Control--> Access Risk Analysis--> Batch RisK Analysis
We applied the next note, but problem is the same.
1563583 - SYSTEM_NO_TASK_STORAGE dump on AIX
Category
ABAP Programming Error
Runtime Errors
ASSERTION_FAILED
ABAP Program
CL_GRRM_DASHBOARD_MENU_AUTH===CP
Application Component GRC-RM
Date and Time
13.03.2013 11:50:04
|Short text
|
|
The ASSERT condition was violated.
|
|What happened?
|
|
In the running application program, the ASSERT statement recognized a
|
|
situation that should not have occurred.
|
|
The runtime error was triggered for one of these reasons:
|
|
- For the checkpoint group specified with the ASSERT statement, the
|
|
activation mode is set to "abort".
|
|
- Via a system variant, the activation mode is globally set to "abort"
|
|
for checkpoint groups in this system.
|
|
- The activation mode is set to "abort" on program level.
|
|
- The ASSERT statement is not assigned to any checkpoint group.
|
|What can you do?
|
|
Note down which actions and inputs caused the error.
|
|
|
|
|
|
To process the problem further, contact you SAP system
|
|
administrator.
|
|
|
|
Using Transaction ST22 for ABAP Dump Analysis, you can look
|
|
at and manage termination messages, and you can also
|
|
keep them for a long time.
|
|Error analysis
|
|
The following checkpoint group was used: "No checkpoint group specified"
|
|
|
|
If in the ASSERT statement the addition FIELDS was used, you can find
|
|
the content of the first 8 specified fields in the following overview:
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|
" (not used) "
|
|How to correct the error
|
|
Probably the only way to eliminate the error is to correct the program.
|
|
|
|
|
|
If the error occures in a non-modified SAP program, you may be able to
|
|
find an interim solution in an SAP Note.
|
|
If you have access to SAP Notes, carry out a search with the following
|
|
keywords:
|
|
|
|
"ASSERTION_FAILED" " "
|
|
"CL_GRRM_DASHBOARD_MENU_AUTH===CP" or "CL_GRRM_DASHBOARD_MENU_AUTH===CM001"
|
|
"IF_GRFN_MENU_ITEM_AUTH~IS_AUTHORIZED"
|
|
|
|
If you cannot solve the problem yourself and want to send an error
|
|
notification to SAP, include the following information:
|
|
|
|
1. The description of the current problem (short dump)
|
|
|
|
To save the description, choose "System->List->Save->Local File
|
|
(Unconverted)".
|
|
|
|
2. Corresponding system log
|
|
|
|
Display the system log by calling transaction SM21.
|
|
Restrict the time interval to 10 minutes before and five minutes
|
|
after the short dump. Then choose "System->List->Save->Local File
|
|
(Unconverted)".
|
|
|
|
3. If the problem occurs in a problem of your own or a modified SAP
|
|
program: The source code of the program
|
|
In the editor, choose "Utilities->More
|
|
Utilities->Upload/Download->Download".
|
|
|
|
4. Details about the conditions under which the error occurred or which
|
|
actions and input led to the error.
|
|
|
|
|
|System environment
|
|
SAP Release..... 702
|
|
SAP Basis Level. 0012
|
|
|
|
Application server... "KIO13701"
|
|
Network address...... "172.20.1.137"
|
|
Operating system..... "AIX"
|
|
Release.............. "7.1"
|
|
Hardware type........ "00F6C78E4C00"
|
|
Character length.... 16 Bits
|
|
Pointer length....... 64 Bits
|
|
Work process number.. 10
|
|
Shortdump setting.... "full"
|
|
|
|
Database server... "KIO13701"
|
|
Database type..... "DB6"
|
|
Database name..... "DGR"
|
|
Database user ID.. "SAPDGR"
|
|
|
|
Terminal.......... "192.168.0.5"
|
|
|
|
Char.set.... "C"
|
|
|
|
SAP kernel....... 720
|
|
created (date)... "Jul 8 2012 19:43:01"
|
|
create on........ "AIX 2 5 00092901D600"
|
|
Database version. "DB6_81 "
|
|
|
|
Patch level. 300
|
|
Patch text.. " "
|
|
|
|
Database............. "DB6 08.02.*, DB6 09.*, DB6 10.*"
|
|
SAP database version. 720
|
|
Operating system..... "AIX 2 5, AIX 3 5, AIX 1 6, AIX 1 7"
|
|
|
|
Memory consumption
|
|
Roll.... 0
|
|
EM...... 8379584
|
|
Heap.... 0
|
|
Page.... 16384
|
|
MM Used. 6205712
|
|
MM Free. 2170976
|
|User and Transaction
|
|
Client.............. 100
|
|
User................ "LVELASCO"
|
|
Language key........ "E"
|
|
Transaction......... " "
|
|
Transaction ID...... "51400164B1F00C40E1008000AC140189"
|
|
|
|
EPP Whole Context ID.... "5140015EB1F00C40E1008000AC140189"
|
|
EPP Connection ID....... "5140F9B0B19C1150E1008000AC140189"
|
|
EPP Caller Counter...... 1
|
|
|
|
Program............. "CL_GRRM_DASHBOARD_MENU_AUTH===CP"
|
|
Screen.............. "SAPMHTTP 0010"
|
|
Screen Line......... 2
|
|
Debugger Active..... "none"
|
|Server-Side Connection Information
|
|
Information on Caller of "HTTPS" Connection:
|
|
Plug-in Type.......... "HTTPS"
|
|
Caller IP............. "192.168.0.5"
|
|
Caller Port........... 44300
|
|
Universal Resource ID. "/sap/bc/webdynpro/sap/grfn_service_map"
|
|
|
|
Program............. "CL_GRRM_DASHBOARD_MENU_AUTH===CP"
|
|
Screen.............. "SAPMHTTP 0010"
|
|
Screen Line......... 2
|
|
|
|
Information on Caller ofr "HTTPS" Connection:
|
|
Plug-in Type.......... "HTTPS"
|
|
Caller IP............. "192.168.0.5"
|
|
Caller Port........... 44300
|
|
Universal Resource Id. "/sap/bc/webdynpro/sap/grfn_service_map"
|
|Information on where terminated
|
|
Termination occurred in the ABAP program "CL_GRRM_DASHBOARD_MENU_AUTH===CP" -
|
|
in "IF_GRFN_MENU_ITEM_AUTH~IS_AUTHORIZED".
|
|
The main program was "SAPMHTTP ".
|
|
|
|
In the source code you have the termination point in line 59
|
|
of the (Include) program "CL_GRRM_DASHBOARD_MENU_AUTH===CM001".
|
|Source Code Extract (Source code has changed)
|
|Line |SourceCde
|
| 29|
lv_dashboard = lv_value.
|
| 30|
|
| 31|
TRANSLATE lv_dashboard TO UPPER CASE.
|
| 32|
|
| 33|
CASE lv_dashboard.
|
| 34|
WHEN 'HEATMAP'.
|
| 35|
lv_report = 'GRRM_HEATMAP'.
|
| 36|
|
| 37|
WHEN 'LOSS_OVERVIEW' OR 'LOSS_STRUCTURE' OR 'OB_LOSS_OVERVIEW' OR 'OB_LOSS_STRUCTU|
| 38|
lv_report = 'GRRM_LOSS_ANALYSIS'.
|
| 39|
|
| 40|
WHEN 'OVERVIEW'.
|
| 41|
lv_report = 'GRRM_OVERVIEW'.
|
| 42|
|
| 43|
WHEN OTHERS.
|
| 44|
ASSERT 1 = 2.
|
| 45|
|
| 46|
ENDCASE.
|
| 47|
|
| 48|
EXIT.
|
| 49|
|
| 50|
ENDLOOP.
|
| 51|
|
| 52|
WHEN 'GRRM_LOSS_MATRIX' OR 'GRRM_LOSS_MATRIX_NEW'.
|
| 53|
lv_report = 'GRRM_LOSS_ANALYSIS'.
|
| 54|
|
| 55|
WHEN 'GRRM_HEATMAP_REPORT'.
|
| 56|
lv_report = 'GRRM_HEATMAP'.
|
| 57|
|
| 58|
WHEN OTHERS.
|
|>>>>>|
ASSERT 1 = 2.
|
| 60|
|
| 61| ENDCASE.
|
| 62|
|
| 63| TRY.
|
| 64|
lv_regulation_id = cl_grfn_api_regulation=>if_grfn_api_regulation~get_regulation_id( i|
| 65|
|
| 66|
ev_authorized = cl_grfn_util_rep_auth=>has_rep_auth(
|
| 67|
io_session
= io_session
|
| 68|
iv_regulation_id = lv_regulation_id
|
| 69|
iv_report
= lv_report
|
| 70|
iv_activity
= grfn0_c_activity-print
|
| 71|
|
| 72|
|
| 73|
CATCH cx_grfn_exception.
|
| 74|
ev_authorized = abap_false.
|
| 75|
|
| 76| ENDTRY.
|
| 77|
|
| 78|ENDMETHOD.
|
|Contents of system fields
|
|Name
|Val.
|
|SY-SUBRC|4
|
|SY-INDEX|2
|
|SY-TABIX|1
|
|SY-DBCNT|1
|
|SY-FDPOS|0
|
|SY-LSIND|0
|
|SY-PAGNO|0
|
|SY-LINNO|1
|
|SY-COLNO|1
|
|SY-PFKEY|
|
|SY-UCOMM|
|
|SY-TITLE|HTTP Control
|
|SY-MSGTY|
|
|SY-MSGID|
|
|SY-MSGNO|000
|
|SY-MSGV1|
|
|SY-MSGV2|
|
|SY-MSGV3|
|
|SY-MSGV4|
|
|SY-MODNO|0
|
|SY-DATUM|20130313
|
|SY-UZEIT|115004
|
|SY-XPROG|SAPCNVE
|
|SY-XFORM|CONVERSION_EXIT
|
|Active Calls/Events
|
|No. Ty.
Program
Include
Line |
|
Name
|
| 34 METHOD
CL_GRRM_DASHBOARD_MENU_AUTH===CP
CL_GRRM_DASHBOARD_MENU_AUTH===CM001
59 |
|
CL_GRRM_DASHBOARD_MENU_AUTH=>IF_GRFN_MENU_ITEM_AUTH~IS_AUTHORIZED
|
| 33 METHOD
CL_GRFN_API_MENU_ITEM_ELA=====CP
CL_GRFN_API_MENU_ITEM_ELA=====CM001 126 |
|
CL_GRFN_API_MENU_ITEM_ELA=>IF_GRFN_MENU_AUTH~ITEM_AUTH
|
| 32 METHOD
CL_GRFN_API_MENU==============CP
CL_GRFN_API_MENU==============CM003
34 |
|
CL_GRFN_API_MENU=>IF_GRFN_MENU_AUTH~ITEM_AUTH
|
| 31 METHOD
CL_GRFN_LAUNCHPAD_UIBB========CP
CL_GRFN_LAUNCHPAD_UIBB========CM006
60 |
|
CL_GRFN_LAUNCHPAD_UIBB=>IF_FPM_GUIBB_LAUNCHPAD~MODIFY
|
| 30 METHOD
CL_FPM_LAUNCHPAD_UIBB_ASSIST==CP
CL_FPM_LAUNCHPAD_UIBB_ASSIST==CM001
76 |
|
CL_FPM_LAUNCHPAD_UIBB_ASSIST=>INIT_FEEDER
|
| 29 METHOD
/1BCWDY/T2POSMRSKMLY9L6LJP5Z==CP
/1BCWDY/B_T2POSBAR6C8HPR0XTR4P
410 |
|
CL_COMPONENTCONTROLLER_CTR=>WDDOINIT
|
|
Web Dynpro Component
FPM_LAUNCHPAD_UIBB
|
|
Controller
COMPONENTCONTROLLER
|
| 28 METHOD
/1BCWDY/T2POSMRSKMLY9L6LJP5Z==CP
/1BCWDY/B_T2POSBAR6C8HPR0XTR4P
181 |
|
CLF_COMPONENTCONTROLLER_CTR=>IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT
|
|
Web Dynpro Component
FPM_LAUNCHPAD_UIBB
|
|
Controller
COMPONENTCONTROLLER
|
| 27 METHOD
CL_WDR_DELEGATING_COMPONENT===CP
CL_WDR_DELEGATING_COMPONENT===CM004
9 |
|
CL_WDR_DELEGATING_COMPONENT=>DO_INIT
|
| 26 METHOD
CL_WDR_CONTROLLER=============CP
CL_WDR_CONTROLLER=============CM00V
3 |
|
CL_WDR_CONTROLLER=>INIT_CONTROLLER
|
| 25 METHOD
CL_WDR_COMPONENT==============CP
CL_WDR_COMPONENT==============CM019
24 |
|
CL_WDR_COMPONENT=>INIT_CONTROLLER
|
| 24 METHOD
CL_WDR_CONTROLLER=============CP
CL_WDR_CONTROLLER=============CM002
7 |
|
CL_WDR_CONTROLLER=>INIT
|
| 23 METHOD
CL_WDR_CLIENT_COMPONENT=======CP
CL_WDR_CLIENT_COMPONENT=======CM00E
24 |
|
CL_WDR_CLIENT_COMPONENT=>INIT
|
| 22 METHOD
CL_WDR_CLIENT_COMPONENT=======CP
CL_WDR_CLIENT_COMPONENT=======CM00A
42 |
|
CL_WDR_CLIENT_COMPONENT=>IF_WDR_COMPONENT_FACTORY~CREATE_COMPONENT
|
| 21 METHOD
CL_WDR_COMPONENT_USAGE========CP
CL_WDR_COMPONENT_USAGE========CM009
67 |
|
CL_WDR_COMPONENT_USAGE=>IF_WD_COMPONENT_USAGE~CREATE_COMPONENT
|
| 20 METHOD
CL_FPM_COMPONENT_MANAGER======CP
CL_FPM_COMPONENT_MANAGER======CM003
81 |
|
CL_FPM_COMPONENT_MANAGER=>ADD_COMPONENT
|
| 19 METHOD
CL_FPM_COMPONENT_MANAGER======CP
CL_FPM_COMPONENT_MANAGER======CM004
19 |
|
CL_FPM_COMPONENT_MANAGER=>ATTACH_COMPONENT_TO_USAGE
|
| 18 METHOD
CL_FPM========================CP
CL_FPM========================CM005
89 |
|
CL_FPM=>PROCESS_EVENT
|
| 17 METHOD
CL_FPM========================CP
CL_FPM========================CM00C
34 |
|
CL_FPM=>RUN_EVENT_LOOP
|
| 16 METHOD
CL_FPM========================CP
CL_FPM========================CM002
5 |
|
CL_FPM=>IF_FPM~RAISE_EVENT
|
| 15 METHOD
CL_FPM========================CP
CL_FPM========================CM003
11 |
|Hi Alberto,
The below Notes should resolve!
1428775
1744179
Hope this helps,
Luciana -
Error while creating new connector in GRC CUP 5.3
Hi,
I am trying to create a new SAP Connector in CUP 5.3, when i fill in all the fields in the new connection and select "Test Connection" it says Connection successful and when i save it and look at the Available connectors, i am unable to see my new connector there.
Does anyone know why is this happening.
a quick response is appriciated.
Thanks.
Edited by: Chaitanya Pallapotu on Jul 14, 2009 9:17 PMHi Chetan,
I have the same issue when configuring connectors in CUP. I solved it in this way:
1- Go to RAR(Risk, Analysis and Remediation) --> Configuration --> Connector --> Search
2- Select one of the connectors and write down the values in the list box of the field JCO Destination.
3 - Now, go to CUP, and create the connector using the names writed down in step 2.
CUP will warn you with an error, ignore it, and then save the connector.
Note: when creating the connector in CUP, fill the fields, then save/create(here you will have the error msg), then Test Connection, and then save again.
That works for me!!!
PD: Always log in to GRC with the same language configured in CUP.
Hope this works for you!!! -
GRC 10 - SSO via Portal - how to redirect url in notification variables
Dears,
I am in the process of designing our GRC 10 machine to be accessed via SSO in the Enterprise Portal. Yet I cannot find any info on what will happen with the URLs that are placed by ARM MSMP workflow in the variables of notifications/approvals.
I typically would (as in 5.3) expect a redirect URL to be made available as an option.
As an example: the Firefighter Log notification standard holds a variable pointing the URL to :
http://GRC10server:GRC10port/sap/bc/webdynpro/sap/grac_ui_spm_log_email?sap-client=001&sap-language=EN&WF_ID=53FB8FEAC9E260D6E10000000AF90C44&APP_TYPE=1
Yet now with SSO via the portal we also want this URL to go via the portal instead of directly to the GRC machine. How can we achieve that?
Is there a configuration way to have GRC10server:GRC10port adjusted to the portal address..
(mind that the WF_ID segment in this url is dynamically generated, so directly sqeezing in a static portal url is not an option)
Cheers,
JimHi Neeraj,
Thx for your reaction. This unfortunately will not do the job as pasting the URL in the notification template will make it static. The problem is that the URL inserted by default is a dynamically created one which holds a variable pointer to a workflow object id.
Now i am researching if a custom build portal redirect application will do the job. But there must be others having the same problem if you want the GRC iview in the portal to be the 'one-stop-shop' for your GRC users...
Cheers,
Jim -
.CSV file for Master data upload in GRC PC
Hi all,
We want to upload some Master Data for GRC Process Controls 3.0. Since we do not have access to MDUG tool yet, and we have a demo planned soon, we decided to go with the approach of uploading some data using the program GRPCB_UPLOAD.
So I uploaded a .csv file with the following structure and was able to create master data. But, the object name was not updated.
Structure
Object Type
Object ID
Infotype
Sub-type
Start
End
Object abbreviation
Object Name
Language
In addition, for some objects, we'd like to update the other attributes with data too.
Would anyone have the .csv format for such a detailed upload for Process / Sub process / Control?
Regards,
PrekshaHi all,
First of all, thanks in advance, but I´ve tried to upload a template similar to Preksha´s template but when I uploaded it through GRPCB_UPLOAD program it doesn´t work properly, because when I execute the background process, I´ll check its status and then it is cancelled .
In addition, I follow the recomendations from the pdf called "Process Control Upload Master Data v1" released by RIG in June 2008, but in contrast I can´t upload the structure correctly.
Do you have any idea? Or could you give me an idea which explains how to create a correct template? Do you have any clue of what I would have done wrong?
Thanks a lot.
Regards. -
Option Activate Applications in Client not found in GRC 10.0
Hi Experts,
Have installed SAP GRC NW Plug-in and I was not getting options to activate access Controls.
I am only getting options for Access Controls are Maintain Plug-in Exits Settings and Maintain Plug-in Configuration Settings.
As per the installation document I should get the following options :
Governance, Risk and Compliance > General Settings node
1.Activate Applications in Client
2. Maintain Languages Supported
3. Setup Transport Connection
Can you please let me know if I am doing anything wrong on installation.
Thanks
ManiHi Mani,
Please have a look at the pre and post installation guides available here:
SAP Access Control 10.0 [original link is broken]
Regards,
Luis -
GRC AC 10.1: Authorizaion Sync Job Error
Hello Everyone,
I'm currently configuring my GRC 10.1 Access Control, I have just finished my common configuration tasks and ran the initial Authorization full sync job.
and am facing the below error message.
Authorization Sync
Starting authorization sync for connector SE3CLNT302 and language EN
Error in SE3CLNT302; Reason Error in RFC; 'No RFC authorization for function m
PFCG authorization sync failed with errors
Repository Object Sync
Program for Repository Profile Syncronization
Processing for connector SE3CLNT302
Error in RFC; 'No RFC authorization for function module /GRCPI/GR'
Profile sync failed with errors
Program for Repository Role Synchronization
Processing for connector SE3CLNT302
Error in RFC; 'No RFC authorization for function module /GRCPI/GR'
Role sync failed with errors
Program for Repository User Synchronization
Processing for connector SE3CLNT302
Error in RFC; 'No RFC authorization for function module /GRCPI/GR'
User sync failed with errors
Repository Object sync job failed with errors
Please check SLG1 for further details
I have double checked my connector settings and connection setting, everything seems fine. I checked the tables GRACCONNSTAT and GRFNCONNSCNLK, the tables are populated correctly. I checked to see the RFC ID passes the authorization test and connection test and the logical systems are populated in BD54, can anyone please tell what I'm missing here and why i'm facing this error message?Hello Reddy
Kindly assign the role SAP_GRAC_ALL to the RFC user . This user can also be
assigned the profile SAP_ALL.
Best Regards,
Neeraj -
Errors while running Sync Jobs in GRC 10
Dear Experts,
I am trying to configure RAR in GRC 10. I have all required config steps and now I am trying to run Sync Jobs and I am getting below errors.
Authorization Synch
Program for Authorization data Synchronization
Starting authorization sync for connector RC1 and language EN
Error in RC1; Reason Error in RFC; 'Function module "/GRCPI/GRIA_AUTH_G
PFCG authorization sync failed with errors
Repository Object Synch
Program for Repository Profile Syncronization
Processing for connector RC1
Error in RFC; 'Function module "/GRCPI/GRIA_PROF_GET_RANGES" not'
Profile sync failed with errors
Program for Repository Role Synchronization
Processing for connector RC1
Error in RFC; 'Function module "/GRCPI/GRIA_ROLE_GET_RANGES" not'
Role sync failed with errors
Program for Repository User Synchronization
Processing for connector RC1
Error in RFC; 'Function module "/GRCPI/GRIA_USR_GET_RANGES" not f'
User sync failed with errors
Repository Object sync job failed with errors
Please check SLG1 for further details
I appreciate your help.
Thanks,
RajHi Raj,
I have a similar error for which I have put up a separate post, your input would be highly valuable.
My RFC connection works via the test in SM59 but when executing GRAC_AUTH_SYNC I get a simiar error to your above.
Please let me know what steps you took.
Best regards,
Paul -
SAP GRC Process Control - General Questions
Hi all,
We have the following general questions regarding SAP GRC Process Control:
1) Assume that we have set up 5 different SAP Connectors in Process Control. When you configured a specific rule and control and then, schedule the job for such control, how does the system (SAP Process Control) knows which back-end system needs to be accesed for such control?
2) In which language are the out-of-the box rule steps's script coded? In which different languages can those scripts be coded, what is to say, in which language can we code our own scripts?
3) How is the detailed flow between SAP Process Control and SAP Back-end system?
Many thanks. Regards,
Imanolnull
-
Migarting from Approva to SAP GRC AC 5.3
Hello All,
One of our client using Approva applications now they are planning to move to SAP GRC Access Controls 5.3, so kindly help me or guide he how I proceed.
Key doubts u2013
1-How we upload rules in RAR, because we downloaded the rules from Approva.
2-Creation of mitigation controls etc.
It would be great if some share some documents related to above.
Thanks,
JagatHi Jagat,
Once your GRC system is configured. You have to follow the following steps:
1. Create system connector
2. Define Master User Source
3. Upload text & authorization objects. (Follow the AC53 Configuration guide to download these files from backend)
4. Now as Frank has suggested you have to convert the downloaded Apporava files to .txt files. There are 9 .txt files you have to create:
1. Business Process
BusinessProcessId (CHAR 4) LANGUAGE (CHAR 2) DESCRIPTION LANGUAGE (CHAR 120)
*fileds are TAB seperated
2. Function
FUNCTION ID (CHAR 8) LANGUAGE (CHAR 2) DESCRIPTION LANGUAGE (CHAR 120) FUNCTION SCOPE (CHAR 1 (S:Single System, C: Cross System))
3. Function-Business Process
FUNCTION ID (CHAR 8) BusinessProcessId (CHAR 4)
4. Function-Action
FUNCTION ID (CHAR 8) TRANSACTION(CHAR 20) STATUS (NUMC 1 (0 or 1))
5. Function-Permission
FUNCTION ID (CHAR 8) T-CODE (CHAR 20) OBJECT(CHAR 10) FIELD(CHAR 10) FROM VALUE(CHAR 40) TO VALUE(CHAR 40) SEARCH TYPE(CHAR3 (AND,OR,NOT)) STATUS (NUMC 1 (0 or 1))
6. Rule Set
RuleSetId (CHAR 8) LANGUAGE (CHAR 2) DESCRIPTION (CHAR 132)
7. Risk ID
RISKID (CHAR 4) FUNCTION_1_ID (CHAR 8) FUNCTION_2_ID (CHAR 8) FUNCTION_3_ID (CHAR 8) FUNCTION_4_ID (CHAR 8) FUNCTION_5_ID (CHAR 8) BusinessProcessId (CHAR 4) PRIORITYDESCRIPTION (NUMC 1 (0=Medium
1=High 2=Low 3=Critical)) STATUS (NUMC 1 (0 or 1)) RISKTYPE (CHAR 1 (1=SoD 2=Critical Action 3=Critical Permission))
8. Risk Description
RISKID (CHAR 4) LANGUAGE (CHAR 2) RISKDESCRIPTION (CHAR 132) DETAILDESCRIPTION (CHAR 1000) CONTROLOBJECTIVE (CHAR 1000)
9. RISK_RULESET
RISKID (CHAR 4) RuleSetId (CHAR 8)
For more information on templates follow the configuration guide.
Upload these files and generate the rules.
Hope with this you will be able to continue.
Thanks & Regards,
Jitan -
ERM Role Export with multiple languages
Hi All,
I have an issues where role download program /VIRSA/RE_DNLDROLES exports the roles with all text languages included (if the role was maintained in multiple languages).
Then when I mass import the roles into ERM (AC 5.3 SP10), the upload program gives an "unknown error." After several hours of testing I figured out that that eliminating all but one of the multiple role language texts in main role file will allow the roles to be uploaded sucessfully.
It seems that the function module /VIRSA/RE_BAPI_DOWNLOAD_ROLES should be changed to include a language parameter.
Anybody ever have this problem?
Thanks, DylanHi All,
I found a workaround for this issue, I'm posting it for posterity then will close this post within a couple of days. I would appreciate to know if anyone has run into this issue too, it can't just be me?!
First, the download of the main role text file from /VIRSA/RE_DNLDROLES stores the file as ANSI text type. At least that is how my Windows PC opens it. IF the role was maintained in mulitple languages with special language characters like ü, ô, ê, é, è, à, ò, ä, ö, then GRC AC 5.3 SP10 ERM gives me an "unknown error" when trying to do the mass import. To fix this issue, simply save the file as text type "UTF-8" or anything but ANSI. The ANSI seems to work fine for plain english.
Second, roles with multiple language versions get all the languages squished together in the long description. I had one role with a Japanese, English, German, French and Italian long description BUT each maintained in it's own language. During the upload, all were imported into ERM and grouped together in one ugly text.
I fixed this (although not ideally) by modifying Function Module /VIRSA/RE_BAPI_DOWNLOAD_ROLES used during the download:
The code change is as follows:
SELECT * FROM AGR_TEXTS APPENDING TABLE i_agR_TEXTS WHERE AGR_NAME
"#EC CI_GENBUFF
*{ REPLACE SIDKxxx
in r_agr_name.
in r_agr_name
and spras eq 'E'. "download only English
*} REPLACE
Then, the 1000+ roles uploaded successfully without issues.
I realized after that OSS Note 1260773 covers explains this similarly.
-Dylan -
FF logs problem -- No detail description when languages are different
Hello Gurus ,
we have a problem when creating the logs in FF tool . There are users that are logging in FF in English language and users that logon with German . When generating the logs i have to logon in the 2 languages to see all the details. If logon in German i dont see the detailed logs from the persons that used FF in English.
We have FF 5.2 with SP04 . Is there any suggestion ? or do i have to wait until we update to GRC 5.3 ?
Regards,
DavidI would suggest that you upgrade AC 5.2 to the latest Service Pack to see if that resolves your problem
AC 5.2 SP10 is the latest version
RTA NH SP 11 is the latest version
RTA HR SP9 is teh latest version
If these upgrades do not resolve your issues then raise an OSS note to resolve your issue
Maybe you are looking for
-
My iPod had the red "x" on the display window when I plugged it in to my computer one day. It was working fine five minutes earlier. When I plugged it in my computer said that the iPod was corrupt. I called Support and they said that there was a hard
-
HT2474 I am not able to see my dock on the MacBook v 10.6.8
i am not able to see my dock and also getting error 13014 for itunes?.
-
Is there a way to export a list of the clips used in iMovie hd? I am making an imovie out of 400+ pictures. I need a listing to see which ones out of iphoto I have used or not. Is there a way to export a list of these photos? I don't see a way to exp
-
Please can someone help with this exam question I have. I have no idea about it I have been looking through loads of website and class documentation but I still have no answer. Please can someone explain this to me thanks Consider the following code:
-
How to combine Streaming video into interMedia/BC4J?
Hi, Based on interMedia/BC4J tutorials, I try to play streaming video. But the problem is it only can browse local files, not include website. Would you please tell me how to make it?