GRC PC 2.5 table for task plan and testlog and its link

Hi,
I want to know the list of tables used and the link between the tables related to GRC PC.
Mainly I need tables involved while creating task plan, test logs. We need to develop a report using this data. We need to know how the tables are linked. We saw some two, three GRPC tables, in which the primary key is GUID. We need to know how this GUID is getting generated and on what basis we can retrieve this information from the tables.
There is one report in report center of GRC PC 2.5. In that selection screen, is it possible to add another filed and based on that retrive data.
Regards,
Karthick S
Edited by: Karthick Sitaraman on Apr 24, 2009 9:55 AM

Karthick,
I can offer the following:
1) SP07 was released on 4/20/2009 and contains a new report "Test Step Status." You might want to look at this report so you don't unnecessarily reinvent the wheel. This would, however, require application of SP07. That report has 42 available fields.....lots of data.
2) The table that contains Test plan Master data is HRP5327.
We previously had minor reporting change required and SAP was able to issue a fix for it. The request was a minor, natural extension of an existing report. Part of the problem is that we have very limited web dynpro ABAP skills in house so development of a report was very time consuming. Another option you might want to look at is BI.
I hope this helps.
Matt

Similar Messages

Table for maintenance plan and maintenance cycle and Unit

Hello,
I need to know the table where the values are stored for maintenance plan, maintenance cycle and Unit.
I know that we can get the maintenance cycle and unit from MMPT table.
Question 1
If the maintenance plan has only a single cycle then the data is stored in above table MMPT, but if a maintenance plan has mutiple cycles like 1 maintenance plan has maintenance cycle as 364 Days and 1092 days then the data is not stored in MMPt table.
Question 2
Requirement is I need to develop a report where in I need maintenance order, maintenance plan and the relevant maintenance cycle and unit. Supose an maintenance order is created for the above maintenance plan which has 2 maintenance cycle how can I identify for which maintenance cycle the order is created.
Regards,
Narendra

Hi,
Please review PM tables
PM/SM/SD Tables
MPOS                       Maintenance Items
AFAB     Network - Relationships
PLKO     Task list
PLAS
AFFH     Operations
PRT assignment data for the work order
AFFL     Work order sequence
AFFT     Order process instructions
AFFV     Order process instruction values
AFFW     Goods movements with errors from confirmations
AFIH     Maintenance order header
AFKO     Order header data PP orders
AFPO     Order item
AFRC     Table of planned changes to conf.: Automatic goods receipt
AFRD     Default values for collective confirmation
AFRH     Header information for confirmation pool
AFRU     Order completion confirmations
AFRV     Pool of confirmations
AFVC     Operation within an order
AFVU     DB structure of the user fields of the operation
AFVV     DB structure of the quantities/dates/values in the operation
MPOS     Maintenance ITEM
AFWI     Subsequently posted goods movements for confirmations
AUFK     Order master data
AUFM     Goods movement for order
MPLA     Maintenance Plans
BGMK     Master warranty header
BGMP     Master warranty item
BGMS     Text item master warranty
BGMT     Master warranty text
BGMZ     Warranty counter information
CRHD     Work Center Header
CRTX     Text for the Work Center or Production Resource/Tool
EQKT     Equipment short texts
EQST     Equipment link to BOM
EQUI     Equipment master data
EQUZ     Equipment time segment
HIKO     Order master data history
IFLO     Functional Location (View)
IFLOT     Functional location (TABLE)
IFLOTX     Functional location: Short texts
IHGNS     Plant maintenance permit segment
IHPA     Plant Maintenance: Partners
IHSG     Object-related permits in Plant Maintenance
ILOA     PM object location and account assignment
IMPTT     Measuring point (table)
IMRG     Measurement document
KAKO     Capacity Header Segment
KONP     Conditions (Item)
KONV     Conditions (Procedure Data)
OBJK     Plant Maintenance Object List
QMEL     Quality notification
QMFE     Quality notification - items
QMIH     Quality message - maintenance data excerpt
QMMA     Quality notification - activities
QMSM     Notification - Tasks
QMUR     Quality notification - causes
STPOA     Name is does not have an A at the end; BOM items
T001     Company Codes
T001L     Storage Locations
T001W     Plants
T077D     Customer account groups
T003O     Order Types
T352R     Maintenance revisions
T353I_T     Maintenance activity type description
T356     Priorities
T357G     Permits
T357G_T     Table 357G texts
T370A     Activity category for PM lists
TINCT     Customers: Incoterms: Texts
TVKO     Organizational Unit: Sales Organizations
TVKOS     Organizational Unit: Divisions per Sales Organization
TVKOV     Org. Unit: Distribution Channels per Sales Organization
TVTA     Organizational Unit: Sales Area(s)
VIAUFKST     Order selection view
MMPT Cycle detail
Regards
Carlos

Table for inspection plan

hi all ,
what are the tables related to inspection plan in QM Module
regards

Following r the important table for inpection plan
1) PLKO    Inspection plan header
2) PLPO    Operation details
3) PLMK    Inspection plan characteristics
4) PLMW   Dependent characteristics specification
5) TQ72     Type of share calculation
6) TQ75      Qm formula parameters
7)TQ03      Control for screen texts
Amol

Any good table for Capacity Planning?

HI all,
Is there any table for capacity planning?
we want to do some development to get capacity requirements data for each work center, don't like using CM01.
Thanks!
Harvey

Dear
Please find below SAP tables for CRP :
CRHD         Workcenter Header Data
CRCA         Workcenter Capacity Allocation
CRCO         Workcenter Cost Center Assignment
CRHH          Hierarchy Header
CRHS           Hierarchy Structure
CRTX          Workcenter Text
KAKO         Capacity Header
KAZY          Intervals of Capacity
Regards
JH

Tables for capacity planning?

HI all,
Is there any table for capacity planning?
we want to do some development to get capacity requirements data for each work center, don't like using CM01.
Thanks!
Harvey

>
harvey wu wrote:
> HI all,
>
> Is there any table for capacity planning?
> we want to do some development to get capacity requirements data for each work center, don't like using CM01.
> Thanks!
>
> Harvey
Hi Harvey,
Kindly check if the Below tables satisfy ur requriement
KBED      Capacity Requirements Records
KBEZ      Add. data for table KBED (for indiv. capacities/sp
KBKO      Header Record for Capacity Requirements
Reg
Dsk

Tables for Financial Planning uploaded through GP12n

Hi Experts,
Can any one guide me, on where the amouts uploaded for financial planning through GP12N get stored i.e which table.
Please advise.
Thanks
Shailesh

Hi Sir,
Please find the below Table names may help you :-
T8PL00 FI Planning: Installed Plan Tables
T8PL01 FI-Planning: Summary Table Dimensions to be Planned
T8PL01DD FI Planning: Dimensions Table Index - Dictionary Information
T8PL01DP FI Planning : Field Dependency for Validation
T8PL01S FI-Planning: Dimensions that Allow Sets
T8PL01SF FI Planning: Special Handling of Dimensions
T8PL01SV FI-Planning: Comb. fixed values/attr. for key fig. and dim.
T8PL02 FI-Planning: User attributes
T8PL02CC FI Planning: Currency Translation
T8PL03 FI Planning: Configuration of Plan Tasks
T8PLUATTR FI-Planning: Key Figures for Planning
If you have any doubts feel free to share.
Regards,
Pankaj A Bhalerao.

Capacity Reservation Table for a planned order

Dear experts,
When I look at MD13, I can see the capacity requirement for a planned order. I can also see the requirements build up in my CM01 screen. We would like to pull the data into our BW system, but we are having issues finding where the capacity reservation information resides. When I look at table KBEZ, I can only find values that correspond to production orders. Is there a similar table for planned orders? Does SAP save the detailed scheduling infromation for planned orders in a table somewhere, or is this calculated at the time MD13 or CM01 is run?
Thanks,
Matthew Bruckner

Have you tried with KBED? I can see with SE16 that you have a field for selection with the planned order number....

Tables for task list

For task list header operation extract we use table plko,now my question is in which tables do we check the opeartions,the packages and the components for the task list.Is there a single table,or a separate table for each to extract the data?

PLAS      Task List - Selection of Operations / Activities
PLKO      Task List Header
PLPO      Task List - Operation / Activity
ABAP table link to

Field and Table for Pension Plan

Can anyone tell me what are the field name and table name in Pension plan

Hi Harini,
In Table VBUK you 3 different status related fields for sales documents.
Over all status field name GBSTK ( here it gives the total status of praticular sales document) here you see options
A Not yet processed      ( This means its complete open)
B Partially processed     ( This means the sales doc is partially processed)
C Completely processed ( This means the sales doc is completly processed)
Delivery status and over all delivery status field name LFSTK and LFGSK respectively, these 2 fields will be same always ( here it gives the total status of praticular sales document) here you see options
A Not yet processed      ( This means its completly open)
B Partially processed     ( This means the delivery doc is partially processed)
C Completely processed ( This means the delivery doc is completly processed)
So overall status can be different then delivery or overall delivery status.
If sales document has 100 quantity for 1 material, if delivery is done for 50 quantity.
Then over all status field name GBSTK will be B Partially processed and delivery and overall delivery will be C Completely processed .
Regards
vK

Table for "Budget planning : Cost Center"

Hi Gurus,
can anyone pls tell me table for "Budget : Cost Centre" . We create budget with respect to cost center in KPZ2/KPZ3 but i am unable to find out in which this data can be found.
Pls tell me the table to retrieve the data.
Regards

You can do it yourself.
goto transaction St05. activate the trace. then execute the transaction. after execution goto st05. click deactivate trace.
then click display trace...hit enter button. a list will be displayed. goto menu bar choose first menu then choose option "Summarice sql statements"...a list will be displayed from which you can know what all tables were affected by the transaction.

Difference in workflow tables for the versions 4.6C and ECC

Hello,
Could someone please let me know as to what changes have been made by SAP in the workflow tables from 4.6c to ECC version?
Thanks,
Samson

Hi
Check these Tables
SWW_OUTBOX - Lists Workflows in outbox together with status
SWW_CONT - Container Contents for Work Item Data Container
SWW_CONTOB - Container Cont. for Work Item Data Container (Only Objects)
SWWLOGHIST - History of a work item
SWWORGTASK - Assignment of WIs to Org.Units and Tasks
SWWUSERWI - Current Work Items Assigned to a User
SWWWIHEAD - Header Table for all Work Item Types
SWW_WI2OBJ - Workflow Runtime: Relation of Work Item to Object
Regards,
Surjith

Tables for OM infotype 1000, 1001 and 1002

Hi,
I need to use OM infotypes P1000, P0001 and P1002. But, I don't know the name of the tables for these infotypes.
Could you please provide me the table names for the above infotypes.
Lokman

Sorry ignore my prev post:
refer hrp1000
HRP1002
AND HRP1001
Message was edited by: Ravi Kanth Talagana

Table for Product Plan Status

Hi,
In "Basic Data" tab of Product Plan Detail, there's Status field which is the "User" status for the Product Plan. I am looking for the table which contains this Status field. DPR_PROJECT table only contain "System" Status field.
Thanks & Regards,
Tony

Hi
PO status is stored in Structure not in the table.
Please use the List displays to get the information like ME2N,ME2L, ME2M, ME2K etc
You can also get the information from the table EKKO, EKPO, EKET,EKBE
Hope it helps
thanks/karthik

Table for overall 'plan' data of IO?

When you do KO12 to set the annual value plan for the internal order - is there a table I get that value out of?
Thanks
Karla

Hi Karla,
Year amounts are stored in BPJA.
Regards,
Eli

Tables for Task & Business Partner - cProject

Hello all,
We are on cProject suite 4.0
For one development, we need to identify tables which can provide relation between task & Business Partners ( resources )
Can anybody throw light on this?
Regards
Prashant

hi prashant,
to identify the tables u can run a trace... transaction : ST05
activate the trace in ST05
run cprojects and open a project in which a task has been assigned a role(resource)
deactivate the trace and view the trace details..it would give u all the tables that have been accessed.
note: remember to deactivated the trace.
let me know if its helpful.
Regards,
vivek mk.

GRC PC 2.5 table for task plan and testlog and its link

Similar Messages

Maybe you are looking for