GRC Upgrade from 5.3 to 10

Hi All,
We are planning to upgrade GRC AC from 5.3 to 10. I would appreciate if any body can please share any knowledge on this so that it will help me go in a proper direction.
Any documents or a like would be a greate help.
Please share your experience/knowledge in this regards.
Regards,
Faisal

Hi Sunny,
Thanks for your response.
Yes, I have seen it and other documents like installation guide on SMP and a dedicated forum for GRC 10 on this SDN, which is really very good and I got all the details from that only.
I wanted to check with the fellow users if they have ecnountered with any peculiar problem which I need to consider while doing.
Regards,
Faisal

Similar Messages

Why upgrade from Compliance Calibrator to GRC?

Hello Experts- My company has yet to implement GRC 5.3. We already utilize SAP Compliance Calibrator by Virsa Systems 4.0, which works fine, so what would be the benefit of upgrading to GRC? Is it really necessary? Is it just to stay current? Also, is it true that GRC will be moving from Java back to an ABAP stack? If so, when is the new ABAP version of GRC set to be available?
Thanks for your advice and opinions.

Regarding the upgrade from 4.0 to 5.3 I concur with Alpesh and Varun.
Regarding the upgrade to 10.0, current plans are for Ramp-up to be available in December 2010 with general release scheduled for mid 2011.
According to the latest material from SAP, they are only supporting a migration path as follows:
4.0 -->5.3 --> 10.0
There is no supported upgrade path from 4.0 directly to 10.0.
It should be noted that it is a significant change in architecture and therefore not a simple migration path. SAP are recommending an upgrade to 5.3 followed by a migration to 10.0 for the technical side of things.
5.3 does still have some significant advantages over 4.0 and therefore is still an option. owever, if you wish to register your interest, SAP are seeking ramp up customers so I would suggest you contact your Consultants or account management within SAP to discuss the options if you are considering it.
Simon

How to Upgrade from SAP NetWeaver 7.01 to NW 7.02?

Hi Experts,
I am working on GRC upgrade project,we need upgrade to GRC10.0 from GRC3.0.
GRC 10.0 only work on NW7.02,we now have NW7.01.
How to Upgrade from SAP NetWeaver 7.01 to NW 7.02?
Use EHPI tools or just spam/saint or any other way ?
current version:
SAP_ABA 701 0006 SAPKA70106
SAP_BASIS 701 0006 SAPKB70106
PI_BASIS 701 0006 SAPK-70106INPIBASIS
SAP_01 0006 BW SAPKW70106
Thanks!

HI,
Net wevaer 7.2 CE is totally different from Net weaver 7.01.
No relation i feel.kindly check the links.
http://help.sap.com/saphelp_nwce72/helpdata/en/44/d958673ef05f4de10000000a11466f/frameset.htm
http://help.sap.com/content/documentation/netweaver/index.htm
OR
You do not need Netweaver 7.2 CE for using NWBC 3.0. You just need netweaver 7.02.
You simply need to apply enhancement package 2 on your existing 7.01 system to make it 7.02.
Please refer to installation guides on service marketplace, there you can see the EHP2 installation guides.
Also, see SAP Note 900000 - Netweaver Business Client - FAQ. This will give you all the details required.
*Regards,
Ajitabh

GRC upgrade to 530_46C taking in account CUA

Hello Guru,
I am actually running GRC 400_46C and we need to upgrade it to 530_46C.
I have been able to find a nice upgrade documentation on service.sap.com; however, I still have a question for you.
I have a CUA installed on my landscape and I was wondering if there is any particular actions/procedures that I will need to follow before doing GRC 530 upgrade.
In addition, if you have any recommendations/comments regarding this upgrade please share them with me.
Thank you and have a great day.
Regards,
Mel

Hi Mel,
As far as I know, there are not additional settings required for CUA when you upgrade from 400_46C to 530_46C.
Alpesh

GRC Upgrade 4.7 to 5.3 - Rule Set Upload

Questions about upgrade from 4.7 to 5.3
Work in corporate conglomerate that consists of 4 independent business units each with own SOD rule set:
u2022How do we upload each independent set of rule sets so they can coexist within GRC 5.3?
u20224.7 mapping of files to 5.3 naming conventions u2013 see 4.7 rule set download below
CONFIG
CR_PROFS
CR_PROFST
CR_ROLES
CR_ROLEST
CR_TRANS
CR_TRANST
SOD_OBECT01
SOD_OBECT02
SOD_OBECT03
SOD_OBECTT
SOD_TCODE
SOD_TCODET

Alpesh
We are trying to upload our existing SOD 4.7 rules using the 5.3 the configuration tab u2013 rule upload. We are having difficulties associating old 4.7 SOD files names to the 5.3 SOD file names. Is this the correct location within 5.3 to associate a physical system to a specific set of SOD rule sets? If not could you please point us to correct location within 5.3.
Thanks

Failed to upgrade from ERP 6.0 EHP4 to EHP5

Dear SAP Gurus,
we are running ERP 6.00 with EHP4 (HCM-component) based on Windows 2003
SP2 X64 and SQL Server 2005 SP4 (64-bit).
We are using SAP Kernel Unicode 7.01 PL 133 (64-bit).
We intend to upgrade from EHP4 to EHP5.
Upon running SAPehpi, we encountered issue which stopped us from
proceeding with the upgrade.
Case 1: Direct upgrade to 605
The upgrade failed on PREP_INPUT/VERSCHK_INI with error message: The
following combination is not supported (SAP_APPL 600, SAP_BASIS 701,
SAP_ABA 701).
Case 2: Upgrade SAP_APPL component from 600 to 604 (due to the above
error message)
The upgrade failed on PREP_INPUT/VERSCHK_INI with error message:
Release '701' of component SAP_BASIS is too new.
Case 3: upgrade via SAINT is not supported by SAP. When uploading the
Stack XML file, we got error saying that the stack is not supported.
Attached is the complete list of the current SP Level of Installed
components.
Please advise on how we can perform the upgrade to EHP5.
Many thanks in advance.
regards,
Denny

The thing is Solution Manager was able to produce the XML file during the previous upgrade to 604 (the one without SAP_APPL 604).
So how can it not be supported by SAP?
If it is not supported by SAP, how can I proceed from here?
Component Software C SP-Level Support Package Short description of the component
SAP_ABA 701 0007 SAPKA70107 Cross-Application Component
SAP_BASIS 701 0007 SAPKB70107 SAP Basis Component
PI_BASIS 701 0007 SAPK-70107INPIBASIS Basis Plug-In
ST-PI 2008_1_700 0003 SAPKITLRD3 SAP Solution Tools Plug-In
SAP_BS_FND 701 0008 SAPK-70108INSAPBSFND SAP Business Suite Foundation
SAP_BW 701 0007 SAPKW70107 SAP Business Warehouse
SAP_AP 700 0021 SAPKNA7021 SAP Application Platform
WEBCUIF 700 0008 SAPK-70008INWEBCUIF SAP WEBCUIF 700
SAP_APPL 600 0018 SAPKH60018 Logistics and Accounting
SAP_HR 604 0035 SAPKE60435 Human Resources
EA-IPPE 400 0018 SAPKGPID18 SAP iPPE
EA-APPL 600 0018 SAPKGPAD18 SAP Enterprise Extension PLM, SCM, Financials
EA-DFPS 600 0018 SAPKGPDD18 SAP Enterprise Extension Defense Forces & Public Security
EA-FINSERV 600 0018 SAPKGPFD18 SAP Enterprise Extension Financial Services
EA-GLTRADE 600 0018 SAPKGPGD18 SAP Enterprise Extension Global Trade
EA-HR 604 0035 SAPK-60435INEAHR SAP Enterprise Extension HR
EA-PS 600 0018 SAPKGPPD18 SAP Enterprise Extension Public Services
EA-RETAIL 600 0018 SAPKGPRD18 SAP Enterprise Extension Retail
FINBASIS 600 0018 SAPK-60018INFINBASIS Fin. Basis
ECC-DIMP 600 0018 SAPK-60018INECCDIMP DIMP
ERECRUIT 600 0018 SAPK-60018INERECRUIT E-Recruiting
FI-CA 600 0018 SAPK-60018INFICA FI-CA
FI-CAX 600 0018 SAPK-60018INFICAX FI-CA Extended
INSURANCE 600 0018 SAPK-60018ININSURANC SAP Insurance
IS-CWM 600 0018 SAPK-60018INISCWM Industry Solution Catch Weight Management
IS-H 600 0023 SAPK-60023INISH SAP Healthcare
IS-M 600 0018 SAPK-60018INISM SAP MEDIA
IS-OIL 600 0018 SAPK-60018INISOIL IS-OIL
IS-PS-CA 600 0018 SAPK-60018INISPSCA IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-UT 600 0018 SAPK-60018INISUT SAP Utilities/Telecommunication
LSOFE 600 0018 SAPK-60018INLSOFE SAP Learning Solution Front-End
SEM-BW 600 0018 SAPKGS6018 SEM-BW: Strategic Enterprise Management
ST-A/PI 01M_ECC600 0001 SAPKITAR7F Application Servicetools for ECC 600-605
VIRSAHR 530_700 0012 SAPK-53312INVIRSAHR SAP GRC Access Controls 5.3 for 700 HR S
VIRSANH 530_700 0014 SAPK-53314INVIRSANH SAP GRC Access Controls 5.3 for 700 HR a

Virsa Access Enforcer Upgrading from 5.1 to 5.2

Hi,
we are upgrading Virsa Access Enforcer from 5.1 to 5.2 GRC acording to the Access Control 52 Product Migration Guide.
All required steps were finished successfully.
After this not a single request in AE can be displayed (Error:Request Approval Screen is not displayed because Request Status has changed),
One example of the error from the AE log:
2007-11-08 10:24:32,160 [SAPEngine_Application_Thread[impl:3]_12] ERROR SQL Exception in insert : [NWMss][SQLServer JDBC Driver][SQLServer]Violation of PRIMARY KEY constraint 'PK__VIRSA_AE_WF_STGF__149DFBA3'. Cannot insert duplicate key in object 'dbo.VIRSA_AE_WF_STGFLD'. ==> VIRSA_AE_WF_STGFLD : {FLD_NAME=Request Role, WFTYPE=AE, FLD_DESCRIPTION=Request Role}
neither the audit trail can be displayed (Erro:No audit trail found for given range or invalid range specified).
In AE52 there are four new tables where has new column REQPATHID added:
VIRSA_AE_RQD_WPCLD
VIRSA_AE_RQD_WPFWD
VIRSA_AE_RQD_WPHST
VIRSA_AE_RQD_WPTRN
Entries to this tables were copied during upgrade from tables:
VIRSA_AE_RQD_WFCLD
VIRSA_AE_RQD_WFFWD
VIRSA_AE_RQD_WFHST
VIRSA_AE_RQD_WFTRN,
but REQPATHID entries was not properly created.
Btw. when did AE52 installation from scratch, not upgrade, on PROD system, i was copying table entries manualy and also had to insert REQPATHID values manually in above mentioned tables.
What I am expecting, when upgrading, this should be done by the system automatically.
Has anyone similar experience with upgrading and how you handle with this.
Thank you.
Regards,
Robert Bilicic

Hi Christof,
The VB codes used in the excel sheets are only excel dependent. I don't think Microsoft has any backward compatability issue with 2003 to 2007. Similarly the VB commands from 5.1 is maintained in 7 so you should not face any major issues there too.
Badrish

I upgraded from 3gs and want to use my old 3gs as an ipod. how can i update my new apple ID on the 3gs as it still shows a previous one that I had?

I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?

Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.

Is it really possible to upgrade from a Treo 650 to a Treo 750?

I am not a very happy customer at the moment, but any help would be greatly appreciated. I upgraded from my old Palm Tungsten to a Zire, then to a Cingular Treo 650, combining three devices into one. I have since discovered that the Treo 650 seems to have a faulty transmission mode, as I can rarely be clearly understood by whomever I call. Am on the second (or third, I have lost track) and continue to have the same problem. I get five bars of reception but can't be understood on the other end. A bit of a problem when one is trying to call 911. Am constantly told I am "breaking up". The repair shop says it "Can't duplicate the problem". OK, then I do not want to give up all the info I have stored in the fool thing, and the 750 seems to have a different system, so I thought I would try that. All the stuff I could find seemed to indicate it wouldn't be a problem to upgrade. When the 750 arrived, I tried to install the software from the CD on my Windows XP computer. No dice. Setup encounters an error and closes. Can't even look at the files, because setup tries to run any time I access the CD. From any drive. Gave it to my girlfiend to check on her computer, and the CD seemed to run fine. Other CDs work just fine on my computer. Must be some kind of conflict, but what? Tried calling the AT&T number that suggested they could help with setup, and was first connected to the business center, they routed me to the laptop center, who routed me to the network center, who said they would have to bring in the Palm customer service and connected me to a Mac guy that dumped me back to a menu that took me to someone for whom English is a second language with whom I was trying to communicate over a very poor satellite connection. They made no sense anyway. telling me first that I couldn't have two desktops running (wrong, my girlfriend has my old Zire and the CD worked fine) and then insisting that the serial number on my device had to start with a P, when it clearly does not have any alpha characters in it. Gave up on that route of assistance. Managed to get the new ActiveSync installed from my girlfriends computer over the network. Great. Now let's get my 650 synced with Outlook (which I have not used at home) and see if we can move on. Nope. First I have to update Outlook 2000 from the old Win98 to my current XP. Find the old CD, and square that away. OK, now sync to Outlook. Nope. The sync program gives an error, saying it will only sync with Outlook 98, 2000, and XP(2002). Good grief. I have Outlook 2000, and the software apparently does not recognize it. If the Palm doesn't work, there is no reason for me to keep this phone, and I am very close to returning it and abandoning the Palm entirely when I upgrade to something that works, although I dread re-entering all that information.
Post relates to: Treo 750 (AT&T)
This question was solved.
View Solution.

Thanks for the feedback. Today I installed an Enterprise version of Office 2007 I purchased a while back, but had not yet installed. Microsoft presented a few challenges, but they were quickly resolved. I then downloaded the appropriate conduit from Palm, and synced the 650 with the handheld overwriting the computer. Then used Active Destop to sync the 750. Satisfied I had moved as much info as possible, I called AT&T and had them move the phone number to the new Treo.
Bonus! When the guy at AT&T called me on the new phone to verify it, he said it sounded better than my landline.
Sorry for the streaming paragraph. When it is late I tend to write like I think.
Dave
Post relates to: Treo 750 (AT&T)

I upgraded from iPhone 3GS to iPhone 6. Everything converted fine until I deleted an app in error. When I downloaded it from iTunes, my account is no longer recognized by the app's host servers. Can I go back and re-sync one app from my old phone?

I upgraded from iPhone 3GS to iPhone 6. Everything converted fine. Yesterday I deleted an app in error. When I downloaded the software it from iTunes ( did this many times on the old 3GS), my account is no longer recognized by the app's host servers (Playtika), even though it did after the initial conversion. Can I go back and re-sync just one app from my old phone?

Try deleting what is called the iPod Photo Cache.
http://support.apple.com/kb/TS1314

I have just downloaded the upgrade from Mountain Lion to Yosemite. In the process i am now unable to gain access to iTunes. The app on desktop no longer works and the install is not able to be opened.

I Have downloaded the upgrade from Mountain Lion to Yosemite. In thee process of so doing I have lost access to iTunes.
The app on desktop no longer opens the program and having downloaded and installed as per Apple instructions, can not make a connection.

Hi, drjbuchanan.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through when experiencing this issue.
iTunes: Troubleshooting issues with third-party iTunes plug-ins
http://support.apple.com/en-us/ts3430
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/en-us/ht2311
Cheers,
Jason H.

Can't print from IE 8 after upgrading from Vista to Windows 7

My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
Any ideas? Thanks for any help.
Jeff
This question was solved.
View Solution.

(same poster)
If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
Specifically, the following steps solved the problem:
1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
2. From a command prompt, issue this command: ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
Jeff

Fields in read-only mode for BP transaction in upgrade from 4.72 to ECC6.0

Hello,
This is regarding the query for BP transaction in upgrade from 4.72 to ECC 6.0.
While creating BP / Changing BP system is disabling the fields in compnay code & sales area option. There is a SAP not provided 907860; and specified that the proplem is because of the delta customizing.
All the customization settings are as per the note. And the Synchronization Control is also activated. But still the fields are disabled only.
I have checked the field settings also in Cross-Application-Components & Logistic-Genral.
But these are not working for compnay code & sales area data.
please let me know if anyone has faced this type of problem / found any solution on this.
Best Regards,
Shubhada

SAP IMG -> Cross Application Components -> Master Data Synchronization  Synchronization Control -> Synchronization Control -> Activate Synchronization options
This setting allows you to activate synchronization of BP with R/3. Not maintaining the values may result in certain fields being read-only in BP.
Suggested Values:
Source Object: BP | Target Object: CUSTOMER | Active Indicator : X
Source Object: BP | Target Object: VENDOR | Active Indicator : X
Source Object: CUSTOMER | Target Object: BP | Active Indicator : X
Source Object: VENDOR | Target Object: BP | Active Indicator : X
Have you set all of the above settings??
BHARATH

Error in Access VBA Application when upgrading from Acrobat 8.0 to 9.0

Hello.
The company that I work for recently upgraded from Adobe Acrobat 8.0 to 9.0 and I`m experiencing some problems with my Access 2003 VBA Application that extracts text from PDF-files and insert it into a table. I have tried adding references to Adobe 9.0 Type Library, but still no luck. Anyone having any ideas for a workaround? See attatched image for error-message. Any help will be greatly appreciated!
Regards,
Steffan

Public Function lesPDF()
'On Error Resume Next
Dim MyDB As Database, EplanSet As DAO.Recordset, ResultSet As DAO.Recordset, SideSet As DAO.Recordset, TekstSet As DAO.Recordset
Dim AcroApp As CAcroApp
Dim AcroAVDoc As CAcroAVDoc
Dim AcroPDDoc As CAcroPDDoc
Dim AcroHiliteList As CAcroHiliteList
Dim AcroTextSelect As CAcroPDTextSelect
Dim PageNumber, PageContent, i, j
Dim Ferdig As Boolean
Dim StartPos, Length As Double
Dim PartSyntax() As String
Dim DocType() As String
Dim Content, strFileName, Temp As String
Dim k, Lengde As Integer
Plant = Form_Autoexec.cmbPlant.Value
Set AcroApp = CreateObject("AcroExch.App")
Set AcroAVDoc = CreateObject("AcroExch.AVDoc")
Set MyDB = DBEngine.Workspaces(0).Databases(0)
EplanSet.MoveLast
EplanSet.MoveFirst
Do Until EplanSet.EOF
    strFileName = EplanSet!path & EplanSet!File
    If AcroAVDoc.Open(strFileName, vbNull) <> True Then
        Exit Function
    End If
    Set AcroAVDoc = AcroApp.GetActiveDoc
    Set AcroPDDoc = AcroAVDoc.GetPDDoc
Here is some of the code, where the program stops is marked in red. This worked perfectly with Adobe 8.0. Thaks for any help or suggestions!

Upgrade from R/3 4.6C to ECC 6.00 : languages

Hi,
We're trying to upgrade from SAP R/3 4.6C to ECC 6.00 under NT environment, having Oracle as database. During the preparation phase, we got the following error, and in our current SAP system R/3 we have 2 additional languages NL and FR (EN and DE are already in), can you please explain why this phase is blocking in this step, and if I continue I've to do a full language import, thanks in advance.
The following language(s) could not be updated yet:
- French       for component EA-APPL
- French       for component EA-DFPS
- French       for component EA-FINSERV
- French       for component EA-GLTRADE
- French       for component EA-HR
- French       for component EA-IPPE
- French       for component EA-PS
- French       for component EA-RETAIL
- French       for component ECC-DIMP
- French       for component ERECRUIT
- French       for component FI-CA
- French       for component FI-CAX
- French       for component FINBASIS
- French       for component INSURANCE
- French       for component IS-CWM
- French       for component IS-H
- French       for component IS-M
- French       for component IS-OIL
- French       for component IS-PS-CA
- French       for component IS-UT
- French       for component LSOFE
- French       for component PI_BASIS
- French       for component SAP_ABA
- French       for component SAP_AP
- French       for component SAP_APPL
- French       for component SAP_BASIS
- French       for component SAP_BW
- French       for component SAP_HR
- French       for component SEM-BW
- French       for component ST-PI
- Dutch        for component EA-APPL
- Dutch        for component EA-DFPS
- Dutch        for component EA-FINSERV
- Dutch        for component EA-GLTRADE
- Dutch        for component EA-HR
- Dutch        for component EA-IPPE
- Dutch        for component EA-PS
- Dutch        for component EA-RETAIL
- Dutch        for component ECC-DIMP
- Dutch        for component ERECRUIT
- Dutch        for component FI-CA
- Dutch        for component FI-CAX
- Dutch        for component FINBASIS
- Dutch        for component INSURANCE
- Dutch        for component IS-CWM
- Dutch        for component IS-H
- Dutch        for component IS-M
- Dutch        for component IS-OIL
- Dutch        for component IS-PS-CA
- Dutch        for component IS-UT
- Dutch        for component LSOFE
- Dutch        for component PI_BASIS
- Dutch        for component SAP_ABA
- Dutch        for component SAP_AP
- Dutch        for component SAP_APPL
- Dutch        for component SAP_BASIS
- Dutch        for component SAP_BW
- Dutch        for component SAP_HR
- Dutch        for component SEM-BW
- Dutch        for component ST-PI
Please mount another Language Disk for these language(s).
If you do not have further Language Disk(s), you may
continue, but the languages mentioned above will be lost
after the upgrade. A full language import has to be
performed after the upgrade to reinstall the language(s).
? continue
? cancel

Hi Markus,
I've introduce the following information:
> MOUNT POINT 07 = S:\export\Data\CDLAN2
> MOUNT POINT 01 = S:\export\Data\KN_WINDOWS_X86_64_AUPG
> MOUNT POINT 06 = S:\export\Data\CDLAN1
> MOUNT POINT 05 = S:\export\Data\CD3
> MOUNT POINT 03 = S:\export\Data\CD1
> MOUNT POINT 08 = S:\export\Data\UMN_WINDOWS_X86_64
> MOUNT POINT 02 = S:\export\Data\KN_WINDOWS_X86_64
> MOUNT POINT 04 = S:\export\Data\CD2
And in mount point 06/07 we have the languages.
The content of the trace file is:
here's the complete trace:
2007/07/05 16:35:01 *****************************
2007/07/05 16:35:01 Checking directories ...
2007/07/05 16:35:01 Searching for Data Carrier labeled AOXUPGR
Adding path: S:\export\Data\KN_WINDOWS_X86_64_AUPG
2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64_AUPG ... no matching label
Adding path: S:\export\Data\KN_WINDOWS_X86_64
2007/07/05 16:35:01 Working on S:\export\Data\KN_WINDOWS_X86_64 ... no matching label
Adding path: S:\export\Data\CD1
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD1
Adding path: S:\export\Data\CD1\UPG1
Adding path: S:\export\Data\CD1\UPG2
Adding path: S:\export\Data\CD1\UPG3
Adding path: S:\export\Data\CD1\UPG4
Adding path: S:\export\Data\CD1\UPG5
Adding path: S:\export\Data\CD1\UPG6
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD1 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG4 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG5 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD1\UPG6 ... no matching label
Adding path: S:\export\Data\CD2
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD2
Adding path: S:\export\Data\CD2\UPG7
Adding path: S:\export\Data\CD2\UPG8
Adding path: S:\export\Data\CD2\UPG9
Adding path: S:\export\Data\CD2\UPG10
Adding path: S:\export\Data\CD2\UPG11
Adding path: S:\export\Data\CD2\UPG12
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD2 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG7 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG8 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG9 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG10 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG11 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD2\UPG12 ... no matching label
Adding path: S:\export\Data\CD3
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CD3
Adding path: S:\export\Data\CD3\UPG13
Adding path: S:\export\Data\CD3\UPG14
Adding path: S:\export\Data\CD3\UPG15
Adding path: S:\export\Data\CD3\UPG16
2007/07/05 16:35:01 Directory structure below S:\export\Data\CD3 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CD3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG13 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG14 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG15 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CD3\UPG16 ... no matching label
Adding path: S:\export\Data\CDLAN1
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN1
Adding path: S:\export\Data\CDLAN1\LANG1
Adding path: S:\export\Data\CDLAN1\LANG2
Adding path: S:\export\Data\CDLAN1\LANG3
Adding path: S:\export\Data\CDLAN1\LANG4
2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN1 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG1 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG3 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN1\LANG4 ... no matching label
Adding path: S:\export\Data\CDLAN2
2007/07/05 16:35:01 Resolving directory structure below S:\export\Data\CDLAN2
Adding path: S:\export\Data\CDLAN2\LANG5
Adding path: S:\export\Data\CDLAN2\LANG6
2007/07/05 16:35:01 Directory structure below S:\export\Data\CDLAN2 resolved
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG5 ... no matching label
2007/07/05 16:35:01 Working on S:\export\Data\CDLAN2\LANG6 ... no matching label
Adding path: S:\export\Data\UMN_WINDOWS_X86_64
2007/07/05 16:35:01 Working on S:\export\Data\UMN_WINDOWS_X86_64 ... no matching label
Regards,
A.Kamel

GRC Upgrade from 5.3 to 10

Similar Messages

Maybe you are looking for