GRC: User not created in backend (CUA client)

Hello expert,
We have GRC 10, SP13.
I have configured the connectors and setting for my CUA client.
I also configured my CUA client in SPRO.
I am able to select my CUA client in ARQ. When submitting, the request is approved.
Audit Log is showing:
Application log is showing:
But there is no user provisioned in my CUA client, not any IDOC or log in showing in my CUA master.
Did I missed something? Any advise is appriciated.
Regards Nguyen

Hi Ameet, thanks for your info.
1) Maintain CUA Settings. Did you maintain CUA system/client as the target client. --> Sorry, I am not sure what you mean? I have configured CUA for my backend and I can create a user via my CUA master, the CUA client is provisioned by sended IDOC from the master. Now I would like GRC provisioning the user to the CUA client instead of the CUA master.
2) Can you see all the child connectors under Maintian CUA settings. Check the tables: GRACCUADIST and GRACCUAMSTR --> yes, my configured CUA client is listed in table GRACCUADIST, table GRACCUAMSTR is empty as I don't want my GRC to use CUA as a global tool.
3) Have you installed CUA plug-ins in CUA system. --> My CUA client and master have the GRC Plugin.
4) Check for the FM: /GRCPI/GRIA_ASSIGN_OBJECT_NH --> FM exist in CUA client/ master and GRC. What is this FM good for?
Thanks for advise, regards Nguyen

Similar Messages

CUA - Users not created in Central System

Hi - Just put in CUA into a Solution Manager 4.0 client - and have the following issue.
After performing SCUG - the users are brought into the central system BUT not created into the central system.
For example:
Child system is CLNT100
Parent system is CLNT200
In CUA - if I search on the user - I can see it exists in CLNT100, but no entry is created in CLNT200.
This is an issue as I can't use SU10 in CUA - to do mass changes as the users don't exist in this client.
I am pretty experienced with CUA - but have not seen this before - is there some new settitng that I need to make to create the users in the CUA client when performing SCUG?
Thanks

Hi - you only need to perform SCUG in the central system.
I have brought all the users accross from each child system.
I think I may have incorrectly analysed the error.
What I am trying to do is use SU10 in the Central system to make changes on users in the child systems. Issue is that none of the users that are in the child system only show up in SU10.
I therefore think that this is an issue with SU10 in CUA parent - as it is only picking up uses if they exist in this CUA parent client (i.e. not if they only exist in the child systems)
Is there any way to change the behaviour of SU10?

OIM Database Connector User not created

I am using OIM 9.1.0.0 with connector pack 9.0.4.1. When I run trusted recon i see the new user appear in the recon manager, but the user is not created. When I open the event and click on Create User the user is created.
But before this the recon event shows data missing.
How can automate it ??

The GTC framework will generate the rule for you if you configure the matching only property. Please take another look at the docs.
Or you can follow PInk's suggestion and crate the rule manually.
Best regards
/M

PO not created in backend after SC creation

Hi Gurus,
We are using classic scenario. Once the SC is approved in EBP it should create PO in backend. But it is not happening.
The status in BBP_PD for the SC is I1111 item in transfer process. Also i checked BBP_PDBEI there the object is BUS2105 and also followon Backend id has been published.
But when i see it R/3 i am nto able to see the PO.
Can you pls. help out trace the error?
With Regards,
Darshan

dharsan
https://wiki.sdn.sap.com/wiki/display/SRM/Howtoanalyzethefollow-ondocumentdetermination
peter method.
however your sc created a number range for Purchase order but really not PO created in ecc system
can you resubmit your shopping cart via clicking follow on docuemnt in monitor sc.
then you will get again real error message in application log or rz20 for the shopping cart.
from that error clearly srm will say why it could not create a PO.
Then you can correct your shopping cart data and it will create a new PO number.
even you hammer /push a shopping cart 10000 times via FM , it will not reach ECC unless you correct the error data in the shopping cart.
muthu

Lync Admin Users not Showing up in Lync client

I have added additional users to Lync. They show up in the Admin website but not in my lync client. Not sure how to add them?

How long has it been? This may just take some time, if you want to speed it up, run update-csaddressbook from the PowerShell, wait a few minutes, and restart a client. Within an hour they should get a fresh copy.
Check out Terence Luk's post for a better explanation and the registry key (GalDownloadInitialDelay) you'd need to speed up the client's download of the GAL after startup:
http://terenceluk.blogspot.com/2013/02/forcing-lync-2013-client-to-download.html
If you still don't see it within 24 hours, you might have a larger issue.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

PO not created in Backend

HI,
My SRM Quality gets re-freshed and i am on ECS scenario, i change all the ALE settings and now i am able to create a Shopping cart but when PO is created in my SRM system it is not replicated in ECC quality and i can see my status of the Purchase order when created with ref to SC is Ordered.
PLease let me know what all are the settings i need to check so that when my PO is created it will get replicated in ECC system.
Smriti

Hi Smriti,
This is a general error message which is returned by the function META_ACCSERV_CHECKACCASSIGNMT for any exception returned by the backend while checking for account assignment.
Problem is more than likely to do with your table BBP_BACKEND_DEST, here is a snapshot of ours.
Ensure your SRM system is the only one of type LOCAL, and with X under LOC_SYS.
Also ensure your SYS_TYPE for the connected backend is correct.
LOG_SYS     DEST                   SYS_TYPE    RFC_POSS LOC_SYS FI_VALIDATION
                                                                                PMECLNT300 PMECLNT300       LOCAL           X                     X        0
QPTCLNT100 QPTCLNT100       ERP_2.0         X                                0
QZ4CLNT100 QZ4CLNT100      R/3_4.0B        X                                0
QZ8CLNT100 QZ8CLNT100      R/3_4.6C        X                                0
You should also check the IMG setting Define Backend System and the the RFC checkbox has been flagged for the backend.
Also very importantly see that in PPOMA the attribute ACS and SYS is correct.
These suggestions should work, if they don't, as at beginning of my reply, the error you are getting is a generic error.
If you set a breakpoint at META_ACCSERV_CHECKACCASSIGNMT you should be able to see the actual errors that are returning from the backend before they are filtered down to that error.
Also if you RFC into backend through this FM and set BP at statement message you will stop at exact error, then can note search or look for more information in SDN.
Hope this helps.
Kind Regards,
Matthew

Urgent ! Purchase Requisition not created in Backend Classic Scenario

Hello All,
I am implementing the classic scenario SRM 5.5. We have replicated the material form the backend to SRM system. Also we have made the necessary config such as maintain backend system, Define Backend System for Product Category, Define Number Ranges for Shopping Carts and Follow-on Document, Define Number Ranges per Backend System for Follow-on Document. Now the problem i am facing is that in the dev system SC with line item with desc and the product (material replicated from backend) as line items are created and their PR is created in the backend. However the same is not happening in the QA system. Only those SC with line item as Desc/text only are created in the backend and those having have product id dont transfer to create PR in the backend. There is no message in the RZ20, SM13, ST22, SM21 etc. Alsowhen i try to tranfer it using the FM BBP_PD_SC_TRANSFER it is created successfully and there is entry in BBP_DOCUMENT_TAB which is cleared afetr clean_reqreq_up is run. I am not sure whats is going wrong. Please help me out guys.
Thanks
Karthik

Hi Andy,
Thanks for the quick responses. I dont see any PR doc no and neither the BUS object type in BBP_PD item details. Please see the o/p below
BE_LOG_SYSTEM                R3QAS400
BE_OBJ_ITEM
BE_OBJECT_TYPE
BE_OBJECT_ID
BE_REFOBJ_TYPE
BE_REFOBJ
BE_REFOBJ_ITEM
BE_REFOBJ_SBITM
BE_REFOBJ_TYPE2
BE_REFOBJ2
BE_REFOBJ_ITEM2
BE_REFOBJ_FYEAR2             0000
BE_STGE_LOC
BE_PLANT                     IE01
BE_BATCH
BE_VAL_TYPE
BE_MOVE_REAS                 0000
BE_EXPERYDATE                000000
BE_PUR_GROUP                 440
BE_PUR_ORG                   IE01
BE_CO_CODE                   IE01
BE_DOC_TYPE                  EC
BE_ACCREQUIRED
BE_SP_STK_IND
BE_INFO_REC
BE_MOVE_TYPE                 101, so i am not sure what could be going wrong.
Is there any way i can debug it and find out what the cause is,
though the calls to the bapis are asynchronous. Also just for the reference sake my backend is 46C. I have been grazing through the notes but haven't found a substantial one.

PR is not creating in Backend ECC for Direct material Shopping carts

Hello Experts,
i have one issue, due to some reasons we deactivated 'Order as Direct Material' button on our SRM shoppingcart screen. But again due to the requirement we activated the 'Order as Direct Material' button. Now the issue is when we are creating a shopping cart by using order as direct material button no Purchase Requisition is creating in the backend ECC. we are in SRM 5.0. we already implemented BADI: BBP_CREATE_BE_RQ_NEW. we are able to create PR for the shopping carts which we order normally i.e for non-direct materials (with out using that order as direct material button).
please guide me on this!!!
thanks in advance!!!!
regards
CD Reddy

Hello,
You can use note 1173815 to debug if follow-on document determination is occurring in backend.
Also, you will be able to check if any error happened during this process.
Kind regards
Ricardo

GTC connector,user not created...

Hi All,
I am new to OIM n just aware of the few terminologies of OIM.
I created a GTC connector for flat file reconcilation then run the scheduled task.In the flat file I added two new users.After the process ,,the details of the two new users must have been added to the OIM DB,but it did not.
When i tried searching dese users I was unable to find them there,although the file was copied from the parent directory to the archiving directory.
What could be the possible error?????
TIA

When you compile your adapters , OIM actually compiles the java code of adapters and put them in to OIM_HOME/xellerate/adapters/..
Check this folder if it has all the class files of the adapters , if not there , just compile them again and restart your server .
Thanks
Suren

New User not creating properly.

Mac mini(mid 2010), running Mavericks 10.9.5. I am trying to create a new user, and have tried several times with out success . Once created I shut down and restart logging on as that user the initial set up screens run Apple ID then set up but when the desktop appears I am left with a non working user interface, No Ikons in the Dock, or sometimes no dock and a flashing screen changing from grey to desktop picture. I have deleted the User in system preferences with a secure erase and tired to recreate. Each time I get the same thing or a variant of it.
Any help would be greatly appreciated.

Do a backup. Boot to the Recovery Volume (command - R on a restart or hold down the option key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Then re-install the OS.
OS X Recovery
OS X Recovery (2)

Unison user not created during install/calendar problems

In the OCS configuration handbook, there is a basic configuration tasks section. I'm trying to configure calendaring and the documentation says to:
su - oracle
su unison
but on my system, user unison doesn't exist, and there is no $ORACLE_HOME/users directory. According to the docs, this is all done by root.sh but during the install. I looked at the root.sh script and there is nothing in it but #!/bin/bash. How can I continue configuring calendar if the unison user wasn't created and the users directory wasn't created and I can't rerun root.sh?

Here are my start and stop scripts....
They are run as the oracle user now (no longer have the unison user in 9.0.4+)
# ----calendar server env begin----
export ORACLE_HOME=/opt/oracle/OraHome1
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
# ----calendar server env end-----
# ----calendar server start begin----
# starting Calendar Server components:
cd $ORACLE_HOME/ocal/bin
./unistart
# ----calendar server start end------
# ----calendar server env begin----
export ORACLE_HOME=/opt/oracle/OraHome1
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
# ----calendar server env end-----
# ----calendar server start begin----
# stopping Calendar Server components:
cd $ORACLE_HOME/ocal/bin
./unistop
# ----calendar server stop end------
Dennis

User not created in OIM 11gr2 - trusted reconciliation from OID

Hello,
in my tests I'm trying to do a trusted reconciliation from OID to OIM.
I checked the errors below in the log file and I checked the column on the database. The column is there but I can't understand why this error appear.
I did a select on this table and this column is empty (select RA_USERLOGIN7C7B96D4 from RA_OIDTRUSTEDUSERBCBD344A).
INFO: Generic Information: select USR_KEY from usr where USR_MIDDLE_NAME is null and USR_UDF_ORCLGUID=? and USR_FIRST_NAME=? and USR_EMAIL=? and USR_LAST_NAME=? and USR_STATUS=? and USR.USR_STATUS != 'Deleted' AND ((UPPER(USR.USR_LOGIN)=UPPER(RA_OIDTRUSTEDUSERBCBD344A.RA_USERLOGIN7C7B96D4)))
INFO: Generic Information: Params = [CF7C29EE75F5A78FE040A8C084000DE8, orcladmin, orcladmin, orcladmin, Enabled]
SEVERE: Generic Information: {0}
oracle.iam.reconciliation.exception.DBAccessException: Failed SQL:: select USR_KEY from usr where USR_MIDDLE_NAME is null and USR_UDF_ORCLGUID=? and USR_FIRST_NAME=? and USR_EMAIL=? and USR_LAST_NAME=? and USR_STATUS=? and USR.USR_STATUS != 'Deleted' AND ((UPPER(USR.USR_LOGIN)=UPPER(RA_OIDTRUSTEDUSERBCBD344A.RA_USERLOGIN7C7B96D4))) =>PARAMS:: [CF7C29EE75F5A78FE040A8C084000DE8, orcladmin, orcladmin, orcladmin, Enabled]
at oracle.iam.reconciliation.utils.DBAccessTemplate.executeQuery(DBAccessTemplate.java:71)
at oracle.iam.reconciliation.impl.BaseEntityTypeHandler.executeSql(BaseEntityTypeHandler.java:508)
at oracle.iam.reconciliation.impl.UserHandler.getMatchingKeys(UserHandler.java:601)
at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.ignoreEvent(ReconOperationsServiceImpl.java:556)
at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.ignoreEvent(ReconOperationsServiceImpl.java:535)
at sun.reflect.GeneratedMethodAccessor3188.invoke(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
Caused by: java.sql.SQLSyntaxErrorException: ORA-00904: "RA_OIDTRUSTEDUSERBCBD344A"."RA_USERLOGIN7C7B96D4": invalid identifier
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
After this error the log shows:
SEVERE: oracle.iam.connectors.icfcommon.recon.SearchReconTask : handle : Recon event skipped
oracle.iam.connectors.icfcommon.exceptions.OIMException: Thor.API.Exceptions.tcAPIException: Child tables only supported at account-level
at oracle.iam.connectors.icfcommon.service.oim11.OIM11Reconciliation.processEvent(OIM11Reconciliation.java:101)
Please help me on this and tell me if I am missing something here.
Thanks

I've found something that worked for me. When executing the trusted recon schedule task, the "Configuration Lookup" field in the "OID Server" IT Resource has to have the value "Lookup.OID.Configuration.Trusted". On the other hand, when executing the user sync recon schedule task, this field must have the value "Lookup.OID.Configuration.Trusted".
The lookups' names can be different if you've manually renamed them.
--jtellier

SRM 7.0 PO not replicated to Backend ECC 6.0 Ehp 4

Hi SRM Gurus,
SRM 7.0 SP 8 - ECC 6.04 SAPKH60406 ECS
RFx Response to PO -
SRM Local PO is created and is in held status. Purchaser gives the source of supply and Acc Assignment and order it.
PO now is in Ordered status.
Issue: this PO is not replicated to Backend ECC 6.04.
Did the Debugging as follows:
1. BP at B46B_DPO_TRANSFER.
2. Got the PO GUID from the BBP_PD transaction.
3. FM BBP_PD_PO_TRANSFER_EXEC, execute it and it stopped in the breakpoint.
4. On 'FUNCTION 'BBP_PO_INBOUND' DESTINATION lv_destination', hit F6.
5. Checked lt_bapi_return details.
Here there should be information regarding some error during the PO copy to backend.
With this error message you can check why the PO was not created in backend.
ERRORS from Backend are as follows:
1.   No instance of object type PurchaseOrder has been created. External reference:   E BAPI 001
2.   Document contains no items       E    ID 06   Number 010
3.   Please enter items first.              W   ID 05                 005
No XML messages in SXMB_moni both in SRM side and ECC side.
What am i doing wrong here? Any help is highly appreciated.
with regards,
Freemind

RZ20 errors:
Local Errors:   Business to Business Procurement(600)
Error reading export data for EXEC transfer of purchase order
Error in local purchase order; no update of references in EXEC system
Backend Errors:
PO 3000000051: No instance of object type PurchaseOrder has been created. External reference:
Purchase order 3000000051: Document contains no items
Purchase order 3000000051: Transfer Failed; Resubmit
Since we are in SRM 7.0 ECC 6.04 Ehp 4, with PI 7.11 + ROS and no SUS.
doent the system uses ESOA Service for PO replication.
We did CCTR / CPPR scenarios too. Both are sucessful.
Do we need to impl BADI PUR_SE_PO_INTERFACE_OUT_SELECT
But thats for Service hierarchy and Service POs - We dont have Service hierarchy or SUS in our SLD.
IF PO replication also uses PI, what configuration do i need to do?

PO not created after complete Approval of SC.

Hi Experts,
I am working with classic scenario with SRM 7.0.
I have an issue related to creation of PO at backend.
After complete approval of SC PO is not created in backend. The status of SC is showing as Approved.
There is no error in RZ20 or Application monitor.
Can you give some touch points where can I find some errors or reason for this.
Where can I check the PO create BAPI is called on approval of SC.
Please help me in this regard.
Regards,
B.N.Karthi

Hi
go to your BBP_PD
click item data
and search for your PO ?
you must have PO there ?
or check ANY ENTRY IN BBP_DOCUEMNT_TAB
Do YOU have valid source of supply?
E_OBJECT_ID-BBP_PDBEI - WHAT IS THER INSIDE?
As laurent staed below, you must check item status too :- it could be purchaser work list too or error in process or can not be ordered...
Muthu

ARD 3.5.1 Client not creating users

Hi,
We have recently purchased ARD 3.5.1 but the client installer is not creating the User we have specified in the create client installer wizard. After some research, there was a post saying that we should add a case for 10.7 in the makeuser file inside the client installer package. I have done that, and it created the user. That seemed to have solved that problem. But, another problem is that ARD will not connect to that client unless remote managment is unchecked and then checked again.
That all seemed to have made everything work fine. The problem is, this is not a fix. I have to do this on alot of systems and I do not want to have to uncheck and recheck remote management throughout the company.
Is this something that any of you are dealing with?
Why would we even have to edit the makeuser file. The case should have already been set on apples end. I also should not have to uncheck and recheck remote management in order to kickstart the service. This should all be already configured properly during the Create Client Installer wizard.
Any help or feedback would greatly be appreciated!
Thanks!
(Using ARD 3.5.1 & 10.7.2 machines)

Lion/ARD users,
I am also having issues with ARD and Lion.
I have done my Lion upgrades remotely via ARD. The Lion upgrades do ok and after install reboot I get remote connection back up again. However after running software update, which downloads ARD Client 3.5.1 my Apple Remove Desktop is no longer able to connect to the machine.
I also cannot access machine via VNC but can access it via SSH.
So it appears to be a problem with VNC ...
Here is the error:
So while ARD see the "fritz" client ok it cannot connect to it.
I have looked in Console log and there are no clues there about what is causing the problem.
I have install the ARD Admin 3.5 Update, so that does not help fix the problem.
I have 7 remote Mac I need to access to this is a signficant problem...
Cheers,
Zebity.

GRC: User not created in backend (CUA client)

Similar Messages

Maybe you are looking for