Great connection with my Graphite, but then i loose connection completely..

I set up my graphite on my powerbook (running leopard) and used the airport admin utility to set up the network. I had great connection for awhile, then it just stopped loading web pages. Even though it's shows it's connected with 4 bars of signal, it just won't load a page. I tried restarting it from the admin utility, but that didn't make any difference.
Think i should just try hard resetting it? Would that really fix the problem?

The IP addresses of the router and DNS server are responsible for routing your traffic onto the internet. They should both point to the base station that has the WAN connection.
Router address can be found under: Network Preferences > Advanced > TCP/IP
DNS address can be found under: Network Preferences > Advanced > DNS

Similar Messages

G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help!

G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help! Pressed pmu button already, nothing ,.. Ppc g4 Mac

Should I check the memory cards themselves? Reseat them?
Yes.
Memtest X or Rember to test the RAM.
Reseat is also good.
The iPhone 4 doesn't like USB 1.1 much.
after the update the computer was working well, except for this freeze when ever I connect iPhone.
I'd try USB 2.0 PCI. That's how I connect my iPhone 4s, and have connected all iPhones and iPods, to my G4.
Never an issue.
Can't say the same for USB 1.1.......
The above (previous post) linked PCI card is cheap enough.
Want cheaper, try this:
http://www.amazon.com/Protronix®-5-Port-Controller-Card-Chipset/dp/B005JE2U82/re f=sr_1_2?ie=UTF8&qid=1337472141&sr=8-2
The NEC chipset is the desired chipset, regardless of what OS the maker says is compatible.
OS X has native NEC chipset USB support.

Unable to use free version regardless of browser on any machine. I login with adobe id but then the loading screen just hangs.

Unable to use free version regardless of browser on any machine. I login with adobe id but then the loading screen just hangs. can't get any further - Tried all suggestions like clearing browser caches but no change.
Got a couple of projects i wanted to try this on and if the software works I will probably take a subscription but considering this isn't working at all will look elsewhere.
Also - adobe live chat support is useless.

Hi,
please share the Adobe ID that you are using with DL-AdobeStory-support<at>adobe<dot>com and we will investigate the issue.
Thanks
Aurobinda

Wireless keyboard initially works with macbook pro, but then freaks out!

i just started using a wireless keyboard and wireless mouse with my 2-year old macbook pro, and while it all initially pairs up and works fine, after about 10 minutes weird things start happening.....like the tilda button seems to suddenly get stuck and repeats itself until i push it down, or my browser windows starts jumping to fill the screen. it still keeps working, but the freaking out on my screen gets worse.
i first unpaired first the keyboard and then the mouse to see which was causing the problem, and it seems to be the keyboard that's the culprit. the battery level seems to be fine, and as i said it seems to be paired correctly when i double check it under bluetooth in sys pref. also checked the keyboard viewer in sys pref and that seems to be working ok. i've done some searching on apple support and in discussions but can't find any similar situation. (also couldn't find a discussions category for keyboard, or would have posted this there)
i would greatly appreciate anyone's thoughts/suggestions on this!

I am having a similar problem with the wireless keyboard. Initially it will work, but then I'll come home and my computer speakers will be beeping because the wireless keyboard is trying to type something from across the room. Additionally, when I try to use my regular onboard keyboard when this happens, its impossible because the wireless keyboard is constantly typing something. My only way around this is to turn off wireless keyboard and only turn it on when I need it. Please post back with your results. Any ideas of how I can fix this?

Firefox 4 and 5 open quickly on my mac with snow lepard but then does not respond for at least 1 minute? after that it runs great. I have tried opening in safe mode and also turned of automatic updates. Same results.

I recently installed Adobe CS 5.5 suite

Hi,
/Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
Move the Safari app from the Desktop to the Applications folder.
Restart your Mac.
That's why you see this:
When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
After your restart your Mac, click the Apple  menu (top left in your screen) then click: Software Update ...
Carolyn

My Jawbone Icon pairs with my MBP but then has an error (There was an error connecting to your audio device...). Is there a fix for this?

See Question...MacBook Pro Lion 10.7.1 and Jawbone Icon not working correctly.

I may have already resolved this issue buy removing the device from my computer and re-pairing it. It is currently working just fine.

I created a sync account with no problem, but then when I try to use it, it keeps telling me I have the wrong password or user name, even after I changed the password. It did this after I created a new account, too.

Every time I try to use my sync account, it informs me that "Sync encountered an error while connecting: Incorrect account name or password. Please try again." I tried changing my password. I even made a new account. It still does the same thing.

If the old ID is yours, and if your current ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

I had locked my iPad with a pin but then I forgot my password.i tried the pin many times and now my iPad is disabled.

It displays that I hav to connect to iTunes

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Cannot backup to iCloud for my iPhone. It tells me to leave it locked plugged in and connected to wifi but then says unable to complete. My iPad worked but not phone

When I try to backup to. Loud from iPhone it will not work. iPad worked fine. I says leave locked, plugged in and connected to wifi. Unable to back up this time. Or failed to complete. I have followed instructions. I have even taken lge amounts required to be stored off list to see if a smaller amou t would work but it hasn't made a difference. What am I doing wrong. iPad was easy.

I have the same problem and can't seem to find a solution anywhere in the support forums or online.
Last backup says, "Never" but 7gig of my 15g of storage is used up. Every time I try to manually start backup to iCloud, the progress bar never moves and I only get "estimating time remaining."
The phone appears to not be backing up automatically at all when my phone is plugged in, locked and on my wifi network.
Apple appears to be unaware or unconcerned with this problem. I'm concerned though. It looks like I'll have to drive an hour to a store to get any help with this problem. Is it seriously cheaper to have a live body in a store used up rather than online interactive support?
Any help with this backup problem would be appreciated.

I shared a movie in iMovie and created a file with the movie but then now I cannot go back in and find the original version to make future edits. What am I missing here? how do i go back and edit the original?

Hi! I need help! I created an imovie and then shared it and cannot go back in and edit the roigianl now. I am new to Imovie and am trying to figure this out quickly as i have to get this done by tonight. Thank you

You might try using the add-on 'NoSquint' which allows numerous zoom options specific to each page you visit & keeps your settings - https://addons.mozilla.org/en-US/firefox/addon/nosquint/
If you want to go back to 3.6x, you will find it here:
http://www.mozilla.com/en-US/firefox/all-older.html
In most cases you can simply "upgrade" (meaning downgrade) directly from the installation. It would be a good idea to save your passwords & bookmarks just to be on the safe side.

My iTunes has been trying to autofill my iPhone with the songs but then it stopped and now i cannot get any of the songs onto the phone

I dont know whar to do from here! it wont let me download any of the songs onto my phone and on my phone it has all these blank files where these songs are supposed to be. The system failure on my phone has also returned due to this im assuming.

Can't connect to the iTunes Store
iTunes Store error (-3212)??: Apple Support Communities

I'm loathed to ask the same question again about the ITunes library not syncing with my iPod but having just done a complete restore, ensuring the tracks are in AAC format.. There are still problems.. Apple are there with the tutorials..but no solvings!!!

I'm using iPod 4th Gen iOS 6.1.3 and an iMac with 11.3 .. All latest versions. I have 23.4gb music according to the file but when I attached the iPod the bar at the foot of the page says 18.3gb. Some tracks are missing. Most if not all have been ripped from cd's into iTunes which is creating AAC format for each track. Other tracks play fine, some show the song but not the Artist and vice versa.
I have tried dragging the tracks from the Mac library to the IPod music file..nothing. So I go to Safari, type the question in and read the same problems over.. Are Apple aware of their Tutorials without troubleshooting pages ? Do they care?
My Pioneer DDJ/T1 is set up with Traktor and only wants to work with iTunes.. So iTunes are edging themselves in everywhere for everything... But it's still not working as it should..
Anyone have any clues please... Tried most all the ideas so far...

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

When my album is ready for purchase..it assembles..but then won't transfer completely to purchase

it starts to transferring the MG but stops each time and says a error with a file has occurred and to hit the retry button or try later. Anyone had this problem? the book is approx 100 pages

see if you can preview it -
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

When I run my Webroot Clean -Up feature Firefox browser windows turn into tiny columns on the left of my screen and I have to unintall and reinstall to get it to display properly but then I loose all my bookmarks --- WHY?!?

this has happened every time I have run the clean-up feature. It is messing with some sort of setting in Firefox because if I uninstall Firefox and don't get rid of all my customizations (there is an option to keep/discard these upon un-installation) when I reinstall, I get the same problem...any ideas?!?

Why don't you stop using that program if it isn't working properly and corrupts your Firefox installation?
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF. But if I do a copy and p

How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF. But if I do a copy and paste, and then take a print of the document, all the graphs and text is printed upside down, flipped back.

Use the Pencil Tool
alex
adrian stock wrote:
> How to copy and paste a single pixel
>
> I want to copy a single pixel and then paste it in the
position of
> another pixel in the same image.
>
> (This is in effect changing the colour of the target
pixel, isn't it.
> But in my case copying an existing pixel seems simpler
than selecting a
> colour from the swatch or using the colour picker.)
>
> What is the most efficient way of doing this?
>
> I tried to select one pixel with the marquee tool. Then
copied it with
> control-C, but then how do I select the target pixel and
paste with
> control-V?
>
> Thanks for your help.
>
> Adrian
>

Great connection with my Graphite, but then i loose connection completely..

Similar Messages

Maybe you are looking for