Great connectors found to work with BNC 2110, BNC 2120, BNC 2121, etc. BNC to 2-wire connectivity

If you need to go from BNC to two wire connections when using Multifunction DAQ, I've discovered two useful BNC adaptors from www.pomonaelectronics.com . They are: Pomona 4969 and 4970. The first is BNC Female to two wire and the second is BNC Male to two wire adaptors. This enables us to use BNC cables to make nice clean BNC connections on the NI connector blocks and at the other end break out to two wires for connection to various (non-BNC) signal conditioning devices.

Hello Rob,
Thanks for this info....Much appreciated!
-Alan A.

Similar Messages

  • Will Apple make a 30-pin to lightning connector that will work with a case?

    Why did Apple make the 30-pin to lightning connector useless when you have a case on your iPhone 5/5s? The lightning connector part isn't long enough to fit inside when using Apple's own cases (i.e. the new leather cases for the 5s). Does anyone know if there are plans to correct this mistake and lengthen the connector?

    From the reviews on Apple's site, the cabled adaptor does NOT work with Apple's own case - the lightning plug is too fat :-(

  • IPod Camera Connector won't work with iPod Classic 80GB?

    I am trying to connect my iPod Classic (80GB) to my Canon 40D camera--to upload my images directly from camera to iPod. When I try, I get a message saying "Accessory is not supported." My local Apple store genius said that the iPod connectors only work with older iPods. I find it hard to believe that they'd eliminate such an important capacity on a newer version. Is he right? Or is there a way I can make it work?

    I have sent Apple feedback a couple times in the past few years asking for the camera connector to come back and work with the ipod touch. The more people ask, the better.
    Is it true that the new version of the SDK will allow apps to access the USB interface of the ipod touch? If that happens, then maybe some third party company can make something similar.

  • Will the iphone 5 digital av adaptor (lightning to hdmi) work with the projector input on my new Sony PJ780VE Videocamera when I connect my iPhone 5 to it?

    Hello....I am new here...first posting.....I have recently bought an iphone 5 and also a new Sony PJ780VE camcorder but with a built in projector that allows external input. I am wondering if anyone knows whether the iphone 5 lightning to Digital AV (HDMI) adaptor will work with this Sony projector input okay if I go ahead and purchase the adaptor from Apple. The reason I ask is that I read on the net that Sony are announcing an adaptor for iphone 5 to allow this connection....at least that's my understanding of this....so do I need a proprietary Sony adaptor to facilitate this connection???

    i have the same problem but had nothing to do with an update, it worked christmas day charged overnight and didn't work the next day

  • I was working with a chat person about a problem of not being able to connect with iTunes and got cut off

    I was working with a apple chat tec and got cut off. How do I get back to that person?

    You probably need to reply to the thread below.
    https://discussions.apple.com/message/23980460#23980460

  • Volume button non-responsive, speaker works with specific processes only (not itunes, pandora, etc), but functions perfectly with headphones

    Volume button non-responsive. Speakers only work with specific functions, but all works perfectly with headphones usually.

    sounds like old
    https://discussions.apple.com/thread/1343532?start=315&tstart=0

  • IPad 2 hdmi connector no longer works with iOS 7.3

    Hi any one else had this issue? I have always connected my iPad 2 to my tv via a apple made hdmi connector, used mainly for fils on netflix eat. Since firmware updated to 7.3 this no longer works. Is this anther apple issue? My wife has an iPad 3, pre lightening and the "official" adapter has never works just get a message that states the attached accessory is not supported.... Any ideas anyone???

    I have an ipad 2 running ios 6.0.1 and an older Dell TV (1080i) and have always been able to mirror.  Running ios 5 the mirroring worked perfectly for sound and video.  Don't remember if I tried while running 5.1.  Now that I have 6.0.1, I can still mirror, but the whole screen is pink on this Dell TV.  When I make the connection from ipad to the tv, mirroring starts immediately and the notification bar on the ipad home screen pulsates from blue to black and the cable is detected.  I have sound and video working fine except for the colors.  The ipad detects the AV Composite cable under settings>about but there is no TV out setting under General Settings where I'm supposed to see TV OUT listed under iTunes Wi-Fi sync.  I have changed the hdmi to a new one, but it didn't help.  I also have a new Panasonic Viera tv and everything (with the same cables) works perfectly on that TV.  Leads me to believe it's an issue with the TV OUT function of the ipad.  I don't know if any of this is helfpul information, but I thought it might help you narrow down what is going on with your setup.

  • How to get busness connector 4.8 working with EDI

    Hello,
    We are being asked to send test XML's from sap to our EDI system (cloverleaf).
    To do this, I have setup the SAP business connector 4.8, and it is running and working fine.  We would like to start testing at this point, however, going over the install guides/admin guides, it does not tell us clearly how we can start testing.
    After installing the Business Connector, what is the next "BASIS" step in connecting this to SAP?  Are there anymore technical activates involved?  I don't see a whole lot more written?
    Or
    Is it all developer activates form here? (i.e. we let them know where the connector is installed, and they start working to putout test EDI's?
    Thank you, any help is greatly appreciated.
    Kind Regards
    Richard

    Hi,
    you need to go to Admin Page and there select adapters section SAP there you need to create an entry for connecting to the SAP System details like host name..sysno user password..
    SAP Alias name will get created and there you can test the connection..
    HTH
    Rajesh

  • HT4101 Camera connector kit not working with ipad3. Not at all able to see any photo . Have tried both the USB connector directly with camera and thru card reader. Tried by copying photos to DCIM folder also.

    Got a iPad camera connector kit. It is not working as expected. It is not able to read any photos. Both the USB connector and sd card reader arenot showing any photos on iPad. Tried copying all photos directly in DCIM folder. Still no result.
    Any other setting needs to be changed?

    Hey, thanks for your updates.
    The photos are 8 character long and extension is .jpg
    The file names are 8 characters long with 3 as alphapet followed by an "_" and then 4 numbers.
    Initially the photos were in a folder inside DCIM folder. I manually copied them to DCIM folder, still no result.
    Can you advice.

  • Accessory not supported by ipad - ipad2 HDMI connector will not work with ipad (4th gen)

    I am a bit frustrated with the fact that I purchased all of the adapters/connectors for my iPad 2 back in the day -  and now all are pretty much worthless with the iPad (4th gen.)
    The iPad g4 uses the new lightning connector. OK. So, I bought the updated adapter (lightning to 30 pin). HOWEVER, it does not allow the Apple HDMI connector to work... "This accessory is not supported by iPad"
    I have to buy yet ANOTHER adapter: the Lightning Digital AV Adapter, and drop $49.00???
    RIDICULOUS!

    There are only other users here.
    Let Apple know by posting at http://www.apple.com/feedback/ipad.html

  • Camera Connector doesn't work with Nikon DSLR?

    I just got the camera connector, and when I connect it to my Nikon D5200 to directly download photos to my iPhone 5, it tells me my Nikon isn't supported.  If it's just reading an SD card, I don't see how this should be an issue.  Am I just missing the right software?  Is it different if I use an iPad instead?
    We're travelling in a few days, and I was hoping to just bring my camera and phone and not have to cart a laptop around to upload photos to the web.
    Many thanks!

    The camera connector is not for the iphone at all.
    It is for the ipad.

  • Working with images – Resizing, Add arrow & text boxes etc

    I am using RH HTML for updating our Web application Help from
    RoboHelp V3 to V6. It involves lot of images. I found the picture
    quality good only using Word in the combination of
    RoboScreenCapture.
    I need to confirm that the method and steps for capturing
    images using Word & RoboScreenCapture will work reliably for
    both WebHelp and Printable output in Word. Please review my
    detailed steps as listed below and give me your suggestions.
    Here are the detailed steps I took for each method:
    Starting with Resize & RoboScreenCapture:
    1. From our Web application I took the screenshot.
    2. I pasted the screenshot in Resize tool and resized it.
    3. Opened the RoboScreenCapture, went back to the Resize tool
    and by using the Screen Capture Hot key - Cntrl+Shift+R, I captured
    the region. The captured screen popped up in the RoboScreenCapture
    tool.
    4. I drew an arrow on the image and the text box and also
    entered the text in the text box. Then I saved the image in the
    RoboScreenCapture.
    5. Opened up the RH Html. Opened up the Web Help project file
    which I am updating and pasted an image in wysiwyg.
    Result
    The image was not very clear looking in wysiwyg.
    In Paint:
    1. From our Web application I took the screenshot.
    2. I pasted the screenshot in Paint, stretch the image form
    100% to 80%. The quality of the image reduced dramatically.
    3. Opened the RoboScreenCapture, went back to the Paint and
    by using the Screen Capture Hot key - Cntrl+Shift+R, I captured the
    region. The captured screen popped up in the RoboScreenCapture
    tool.
    4. I drew an arrow on the image and the text box and entered
    the text in the text box. Then I saved the image in
    RoboScreenCapture.
    5. Opened up RH Html. Opened up the Web Help project file
    which I am updating and pasted an image in wysiwyg.
    Result
    The image was not very clear looking in wysiwyg.
    Finally, with Word:
    1. From our Web application I took the screenshot.
    2. I pasted the screenshot in Word, resized it. While in Word
    I can draw an arrow on the image and the text box and entered the
    text in the text box.
    3. Opened the RoboScreenCapture, went back to the Word and by
    using the Screen Capture Hot key - Cntrl+Shift+R, I captured the
    region. The captured image popped up in the RoboScreenCapture tool.
    Then I saved the image in RoboScreenCapture.
    4. Opened up RH Html. Opened up the Web Help project file
    which I am updating and pasted an image in wysiwyg.
    Result
    Nice & Clear

    There's a topic about this on my site that might interest
    you.
    I recently tried the Microsoft Fax and Image viewer (the
    freebie with XP) and reduced the window size dramatically. With a
    photographic image it was very good. A quick test suggests it might
    be good with text as well.

  • Widows Search not working with Data Deduplication?

    Hi,
    I noticed that many files were missing when searching for them on my Server 2012 Fileserver.
    After some troubleshooting I noticed that the ones missing, had a Size on Disk of 4KB and the "SparseFile" and "ReparsePoint" (PL) Flags set.
    So it looks like they were processed by the enabled Data Deduplication.
    Am I missing something here or is it really the case that deduplicated files cannot be indexed by windows search?

    BTW! "... and mounted those file hierarcies below. 5 reparse points" so I my case I had consolidated the users Space into 5 overall concepts on 1 volume each. In that way I had already reduced my use of volumes.
    So for now I can add a drive letter to each for trying to make Windows Search work.
    But guess I am going to stumble into the same issue then with Windows Search not supporting resparse points again ....because some of the volumes are deduped.
    Great experience as ever working with file virtualization in the Windows client, i.e. Liberaries. Just wonder why the heck MS did not improove that experience ...
    Right now, with Server 2012, find myself "hacking" again this year 2013 ... to try and make Windows work on some basic issues. All the Flex is starting to go away now ... here comes reality ... NOT WORKING.
    NTFS resparse points, long file names, etc. Great Flex! However in theory only. For real when everything is pulled together and the system receives its more or less complete configuration ... unsupported in Windows. Go hack it.
    Please stop doing just components test ... and do complete flight tests also. More hollistic tests please across constraints! With a focus in each test ... from 0 to a fully configured system.
    How can no support in Windows Search for resparse points in NTFS be a miss during introduction of libraries (Windows 7/2008 R2) and now during introduction of data deduplication (Windows 8/2012) ... during just internal tests at MS? And we all have to use
    libraries (thus a remote Windows Search index on remote shares in a domain setup) ... and now Windows 8 WinRT is even more dependent on libraries? How can that be overlooked - or such a basic thing receive no priority - and just get skipped? How can that happen?

  • Working with 32 bit color HDRs in Lightroom

    The feature of being able to work with 32 bit color Tiff files in Lightroom is awesome and wonderful.  However, I note that when I do not follow the recommended workflow of bringing the 32 bit file directly back into Lightroom to work on it - working on it with Adobe Camera Raw in Photoshop first - the results are somewhat confusing. I'm fine with following the recommended workflow except for the fact that I seem to be able to come up with even better results quite quickly using ACR.  ACR appears to give me a greater tonal range to work with, but when I save the file as a Tiff and take it back to Lightroom the colors aren't displayed correctly by Lightroom.  There is a huge difference between viewing the file in Photoshop and viewing it in LR. If I work on the file immediately in LR, avoiding doing anything in PS, the files look identical in both programs, but at the apparent cost of losing a lot of exposure range to play with.  Am I correct in inferring that LR is working on the 32 bit colors using a 16 bit color depth conversion in the tools? 

    https://dl.dropboxusercontent.com/u/106834366/Redux%20Vidz.aep
    This is kind of a project-ruining issue not being able to render it out in 32-bit -- I'm working with a lot of gradients and lens blurs.
    Anyone have any hints of why this might be happening?

  • Need Sceptre TV Remote Control code(s) that work with VZ P265v3RC -- the '335' code does NOT

    Recently upgraded my TV's in my house with new Sceptre 40" and 50" TV's - thank you WalMart. Purchased in September 2014. (new / current Sceptre TVs).
    All of the Verizon printed, online, and other documentation for the P265V3 RC (model RC2655005/01B) for Sceptre shows to use code '335'.   I have tried the '335' code on both of the TV's and no worky at all. 
    Following the 'Quick Setup Guide-Verizon FIOS remote' steps (paper/PDF instructions with RC Manual):
    I can successfully enter the '335' code as outlned in step 4... and 'The RED LED will blink twice and then stay on'. occurs.  So far, so good.
    Step 5 states, "5. Press and release the <CH +> button repeatedly until the TV turns off......."   This happens perfectly... I can press the <CH+>> button a few times, and indeed, my TV turns off.
    Now, onto Step 6: "Test that the remote control is programmed for your TV".....  can't get Mute, A/V, other keys to activate /. be recognized - even though I'm followijng "press and hold that key. Release it as soon as it works"
    Does anyone have a working code for Sceptre TV's ??? The Verizon '335' code doesn't work for me.
     I need the 'best code' anyone has found that works with new Sceptre TV's.... the 335 code that VZ recommends... no worky.

    Robertop,
    have you tried the following? The info below  is found here
    Turn on your TV and the FiOS TV Set-Top Box.
    Make sure you can see live TV.
    Press and hold the OK and FiOS TV buttons together then release both buttons.
    The red LED light blinks 2 times and then stays on.
    Press and hold the Play button.
    The remote control tries a new TV code every second.
    The red LED light blinks each time a new code is sent.
    When the TV turns off, release the Play button immediately.
    NOTE: Some TVs may respond slower than others. If necessary, you can press the Ch+ and Ch- buttons to go forward or backward one TV code at a time.
    Test your remote to ensure it is working properly:
    - Turn on the TV by pressing the TV button on your FiOS TV remote.
    - Press the Vol+ and Vol- buttons to ensure that you can control the volume.
    - Press the Mute and A/V buttons to ensure they work.
    If any of these buttons do not work, press and hold that button. Release the button as soon as it works.
    If all the buttons work, press OK to this TV remote code.
    The red LED light blinks 3 times and then turns off. Your remote control is now programmed.

Maybe you are looking for